In glsl the clamp function has undefined behavior when min > max. For
the clamp node this resulted in differences between cycles and eevee.
This patch adds the expected implementation for minmax.
The old clamp function is still used in cases where we know for certain
that the input values are correct (math node clamp option). GPU uses
optimized code and silicon in these cases.
This patch adds support for AOVs in EEVEE. AOV Outputs can be defined in the
render pass tab and used in shader materials. Both Object and World based
shaders are supported. The AOV can be previewed in the viewport using the
renderpass selector in the shading popover.
AOV names that conflict with other AOVs are automatically corrected. AOV
conflicts with render passes get a warning icon. The reason behind this is that
changing render engines/passes can change the conflict, but you might not notice
it. Changing this automatically would also make the materials incorrect, so best
to leave this to the user.
**Implementation**
The patch adds a copies the AOV structures of Cycles into Blender. The goal is
that the Cycles will use Blenders AOV defintions. In the Blender kernel
(`layer.c`) the logic of these structures are implemented.
The GLSL shader of any GPUMaterial can hold multiple outputs (the main output
and the AOV outputs) based on the renderPassUBO the right output is selected.
This selection uses an hash that encodes the AOV structure. The full AOV needed
to be encoded when actually drawing the material pass as the AOV type changes
the behavior of the AOV. This isn't known yet when the GLSL is compiled.
**Future Developments**
* The AOV definitions in the render layer panel isn't shared with Cycles.
Cycles should be migrated to use the same viewlayer aovs. During a previous
attempt this failed as the AOV validation in cycles and in Blender have
implementation differences what made it crash when an aov name was invalid.
This could be fixed by extending the external render engine API.
* Add support to Cycles to render AOVs in the 3d viewport.
* Use a drop down list for selecting AOVs in the AOV Output node.
* Give user feedback when multiple AOV output nodes with the same AOV name
exists in the same shader.
* Fix viewing single channel images in the image editor [T83314]
* Reduce viewport render time by only render needed draw passes. [T83316]
Reviewed By: Brecht van Lommel, Clément Foucault
Differential Revision: https://developer.blender.org/D7010
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
This patch allows the user to type a property name into the
Attribute node, which will then output the value of the property
for each individual object, allowing to e.g. customize shaders
by object without duplicating the shader.
In order to make supporting this easier for Eevee, it is necessary
to explicitly choose whether the attribute is varying or uniform
via a dropdown option of the Attribute node. The dropdown also
allows choosing whether instancing should be taken into account.
The Cycles design treats all attributes as one common namespace,
so the Blender interface converts the enum to a name prefix that
can't be entered using keyboard.
In Eevee, the attributes are provided to the shader via a UBO indexed
with resource_id, similar to the existing Object Info data. Unlike it,
however, it is necessary to maintain a separate buffer for every
requested combination of attributes.
This is done using a hash table with the attribute set as the key,
as it is expected that technically different but similar materials
may use the same set of attributes. In addition, in order to minimize
wasted memory, a sparse UBO pool is implemented, so that chunks that
don't contain any data don't have to be allocated.
The back-end Cycles code is already refactored and committed by Brecht.
Differential Revision: https://developer.blender.org/D2057
Add a new Alpha socket to the Attribute node that outputs the
fourth component of the attribute. Currently the only such
attribute is vertex color, but there may be more in the future.
If the attribute has no alpha channel, the expected value is 1.
The Cycles code is already refactored and committed by Brecht.
Ref D2057
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
Based on http://jcgt.org/published/0008/01/03/
This is a simple trick that does *not* have a huge performance impact but
does work pretty well. It just modifies the Fresnel term to account for
the multibounce energy loss (coloration).
However this makes the shader variations count double. To avoid this we
use a uniform and pass the multiscatter use flag inside the sign of f90.
This is a bit hacky but avoids many code duplication.
This uses the simplification proposed by McAuley in
A Journey Through Implementing Multiscattering BRDFs and Area Lights
This does not handle area light differently than the IBL case but that's
already an issue in current implementation.
This is related to T68460.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8912
This follows the GPU module naming of other buffers.
We pass name to distinguish each GPUUniformBuf in debug mode.
Also remove DRW_uniform_buffer interface.
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
When disconnecting links for defaulted node group inputs, recurse
into the nested node group nodes, instead of checking the socket
flag. Otherwise the behavior is confusing and differs from Cycles.
Differential Revision: https://developer.blender.org/D8455
The abbreviation 'init' is brief, unambiguous and already used
in thousands of places, also initialize is often accidentally
written with British spelling.
- add the use of DRWShaderLibrary to EEVEE's glsl codebase to reduce code
complexity and duplication.
- split bsdf_common_lib.glsl into multiple sub library which are now shared
with other engines.
- the surface shader code is now more organised and have its own files.
- change default world to use a material nodetree and make lookdev shader
more clear.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8306
This is also a bit of code cleanup, reorganisation.
Tried to be DRYed but avoid too much code change to (hopefully) minimize
breakage.
- GPU: remove TEXTARGET_CUBE_MAP, this is no longer used in the codebase.
- GPUTexture: Move compressed texture upload to gpu_texture.cc
- GPUTexture: Add per texture Anisotropic filtering switch
The sky will appear brighter than before by default. To compensate for this,
lower exposure in the Film panel. The default altitude was also changed from
90 to 15 degrees.
Patch contributed by Marco with the help of Ryan Jones.
Differential Revision: https://developer.blender.org/D8285
This updates the usage of integer types in code I wrote according to our new style guides.
Major changes:
* Use signed instead of unsigned integers in many places.
* C++ containers in blenlib use `int64_t` for size and indices now (instead of `uint`).
* Hash values for C++ containers are 64 bit wide now (instead of 32 bit).
I do hope that I broke no builds, but it is quite likely that some compiler reports
slightly different errors. Please let me know when there are any errors. If the fix
is small, feel free to commit it yourself.
I compiled successfully on linux with gcc and on windows.
This also introduces the `blender::nodes` namespace. Eventually,
we want to move most/all of the node implementation files into
this namespace.
The reason for this file-move is that the code fits much better
into the `nodes` directory than in the `blenkernel` directory.
When using the sun, we need to sun sampling logic to avoid excessive
sampling map resolution, but that logic assumes that the Vector input
comes from the view direction.
That is the case in the vast majority of cases anyways, so the easiest
solution is to just remove the input for that case.
Differential Revision: https://developer.blender.org/D8091
This disables all Sculpt Vertex Colors tools, operators, panels and rendering capabilities and puts them under the "Use Sculpt Vertex Colors" experimental option.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8239
I'm not sure if the Sky was deliberately left out or was just waiting for a
better moment, but so many I was disappointed that Sky in EEVEE is
completely white.
There are already 2 implementations (osl and gpu) so this is the third one.
Looking at other cases it seems that we are not supposed to share sources
between cycles and the rest? So the new util_sky_model files are just
copies of what is already in cycles, except that the data file uses the RGB
variant of the Hosek/Wilkie model, because we output RGB anyway (but can be
easily changed to XYZ if desired - the results are nearly identical).
I am not sure if it is okay to pass 3*9 float values as 3 mat4 uniforms (I
wanted to use mat3 but it does not work).
Also, should I cache the sky model data between renders if the parameters
do not change?
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D7108
This adds new callbacks to `bNodeSocketType` and `bNodeType`.
Those are used to generate a multi-function network from a node
tree. Later, this network is evaluated on e.g. particle data.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8169
