This brush has a simple physics solver that helps when sculpting cloth.
- The mass and the damping properties of the simulation are properties of the brush.
- It has two additional radius control to limit the influence and falloff of the simulation.
- Masked vertices are pinned in the simulation, and it applies the sculpt gravity directly in the solver.
- The Cloth Brush has 7 deformation modes with 2 falloff types (radial and plane).
The brush can create the constraints only on the required PBVH nodes, so the simulation is isolated on high poly meshes. As long
as the brush size is not too big it should be possible to keep it real time.
Known issues:
- The way constraints are created is extremely basic and it creates repeated constraints. Maybe there is another way to create fewer constraints while keeping the simulation quality decent. This part can also be multithreaded. (As it is it works ok, but it could be better)
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6715
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
This previously caused a bug in T74283, that should be fixed now.
Differential Revision: https://developer.blender.org/D6695
This reverts commit f2b95b9eae.
Fix T74283: modifier display lost when moving object in edit mode.
The cause is not immediately obvious so better to revert and look at this
carefully.
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
Differential Revision: https://developer.blender.org/D6695
This fixes {T70269}.
Before this commit there was complicated code to try and compute the
correct parent inverse matrix for the 'Child Of' and 'Object Solver'
constraints outside the constraint evaluation. This was done mostly
correctly, but did have some issues. The Set Inverse operator now defers
this computation to be performed during constraint evaluation by just
setting a flag. If the constraint is disabled, and thus tagging it for
update in the depsgraph is not enough to trigger immediate evaluation,
evaluation is forced by temporarily enabling it.
This fix changes the way how the inverse matrix works when some of the
channels of the constraint are disabled. Before this commit, the channel
flags were used to filter both the parent and the inverse matrix. This
meant that it was impossible to make an inverse matrix that would
actually fully neutralize the effect of the constraint. Now only the
parent matrix is filtered, while inverse is applied fully. As a result,
pressing the 'Set Inverse' matrix produces the same transformation as
disabling the constraint. This is also reflected in the changed values
in the 'Child Of' unit test.
This change is not backward compatible, but it should be OK because the
old way was effectively unusable, so it is unlikely anybody relied on
it.
The change in matrix for the Object Solver constraint is due to a
different method of computing it, which caused a slightly different
floating point error that was slightly bigger than allowed by the test,
so I updated the matrix values there as well.
This patch was original written by @angavrilov and subsequently updated
by me.
Differential Revision: https://developer.blender.org/D6091
This patch adds the ability to set colors and alpha of dashed line of
Time Markers. That way themes can avoid contrast issues and communicate
selection better. See screenshots in D6877.
Bumps subversion.
Reviewed By: William Reynish, Julian Eisel
Differential Revision: https://developer.blender.org/D6877
This adds the `Half Float Precision` option in the image property panel.
This option is only available on float textures and is enabled by default.
Adding a flag inside the imbuf (IB_halffloat) on load is done for EXR and PSD formats that can store half floating point (16bits/channels).
The option is then not displayed in this case and forced.
Related task T73086
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6891
This is using the GGX probe as background. This has the drawback of
having the resolution choosed in the indirect lighting setting.
The blurring is not really high-quality.
The pros is that it has a simple implementation and is fast to evaluate.
This patch also fades the background alpha to make overlay engine draw the
default background color in the correct color space. Removing one colorspace
hack.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6895
File Browser using Windows file attributes for decorating and hiding items.
Differential Revision: https://developer.blender.org/D6816
Reviewed by Campbell Barton
This patch adds new render passes to EEVEE. These passes include:
* Emission
* Diffuse Light
* Diffuse Color
* Glossy Light
* Glossy Color
* Environment
* Volume Scattering
* Volume Transmission
* Bloom
* Shadow
With these passes it will be possible to use EEVEE effectively for
compositing. During development we kept a close eye on how to get similar
results compared to cycles render passes there are some differences that
are related to how EEVEE works. For EEVEE we combined the passes to
`Diffuse` and `Specular`. There are no transmittance or sss passes anymore.
Cycles will be changed accordingly.
Cycles volume transmittance is added to multiple surface col passes. For
EEVEE we left the volume transmittance as a separate pass.
Known Limitations
* All materials that use alpha blending will not be rendered in the render
passes. Other transparency modes are supported.
* More GPU memory is required to store the render passes. When rendering
a HD image with all render passes enabled at max extra 570MB GPU memory is
required.
Implementation Details
An overview of render passes have been described in
https://wiki.blender.org/wiki/Source/Render/EEVEE/RenderPasses
Future Developments
* In this implementation the materials are re-rendered for Diffuse/Glossy
and Emission passes. We could use multi target rendering to improve the
render speed.
* Other passes can be added later
* Don't render material based passes when only requesting AO or Shadow.
* Add more passes to the system. These could include Cryptomatte, AOV's, Vector,
ObjectID, MaterialID, UV.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6331
This commit replaces the "Use Gradient" checkbox theme option with an
enum and implements a radial background.
Whith this change, it should be easier to implemet other types of more
complex background types, like a world space oriented gradient.
Reviewed By: billreynish, fclem, brecht
Differential Revision: https://developer.blender.org/D6825
This patch adds a dedicated path to extract 16bit normals instead of packing them into 10bits/comp.
The tangents are also packed to 10bits/comp if not using the new High Quality Normal option.
Fix T61024 Degraded texture shading on dense meshes
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6614
Adds the invert vgroup option to the UVWarp modifier. Adds a flag and char padding to the DNA.
Differential Revision: https://developer.blender.org/D6841
This node provides the ability to rotate a vector around a `center` point using either `Axis Angle` , `Single Axis` or `Euler` methods.
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D3789
* Direction mode X, Y and Z to align with axes rather than diagonal or
spherical as previously. X is the new default, existing files will
use diagonal or spherical for compatibility.
* Phase offset to offset the wave along its direction, for purposes like
animation and distortion.
https://developer.blender.org/D6382
Currently the only option is to warp based on the transform of other
objects, which is inconvenient if you want to e.g. control it through
a driver - you need to set up a dummy object and go through that,
which is clunky and should be unneccessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6690
This adds some extra functions recently added to the float Maths Node.
Not all functions have been ported over in this patch.
Also:
+ Tidy up menu
+ Change node color to match other vector nodes, this helps distinguish vector and float nodes in the tree
+ Move shared OSL functions to new header node_math.h
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6713
NOTE: This change shouldn't have any visible effect. It's just the
first (easiest) step towards decoupling gizmo redraws from viewport
redraws.
We currently redraw the entire region whenever a gizmo needs redrawing,
which would be nice to avoid in the future, see T73198. The first step
towards this would be having a separate tag for them, which is what
this patch implements.
The term "editor-overlays" was chosen because for the forseeable future,
we'll also have to redraw non-gizmo overlays in-between drawing 3D and
2D gizmos. Namely annotations.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6838
This allows for more flexibility in Compositing compared to the
hardcoded alpha-over that is currently used.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6829
Adds the invert vgroup mask option to the Vertex Weight modifiers.
These 3 modifiers share the same functions so they needed to be modified at the same time. They are all setup the same with the invert vgroup option being added. I had to add a flag to the Mix modifier but the others I use the existing flags.
Differential Revision: https://developer.blender.org/D6819
This enables an extra layer of control in the sculpt brushes.
For now it is enabled only in Scrape, but it should work in all brushes (like normal radius). In the future it may also be enabled in other brushes.
You can tweak in this property in the scrape brush to achieve a much better behavior when working on curve surfaces and control how much volume you want to trim. In most cases, it also fixes the bug where the brush keeps trimming in the same area without disabling accumulate.
It should be possible to fix some other artifacts in other brushes by tweaking this default property.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5993
This patch allow to change the brush tip shape between a square and a
circle using a brush property.
After this change we are no longer testing the distance against a cube
(the Z axis is not used). I did not test this in depth, but if it does
not produce any artifacts I think we can keep it this way instead of
adding more complexity to the code.
In this new distance test the brush falloff is only applied on the
rounded parts of the square to avoid sharp artifacts in the
diagonals. Because of this, the round version is much softer than
the square one. The planned hardness property will fix this, but
this can also be avoided by setting the fallof to a custom curve.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6165
The IK chain was using an anchor point by default as it makes sense for
posing, but for creating curved shapes it is useful to be able to
disable it.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6584
This brush simulates deforming clay with your fingers, accumulating
material during the stroke. It has a plane that tilts during the stroke
in the front part of the brush to achieve this effect.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6238
While the file in this report had corrupted values,
this is avoidable without adding any extra overhead.
Use unsigned vertex group indices since we don't need negative values,
this is an alternative to checking they aren't negative in many places.
Vertex group values over INT_MAX is still considered invalid,
so any accidental unsigned wrapping won't be silently ignored.
Previously any of the named views could not have any roll,
this commit supports roll as long as it's axis-aligned (90,180,270 deg).
This is useful for snapping to views,
an improvement on cebd025e02.
