- remove double promotions
- use UI_DPI_ICON_FAC macro rather then dpi/72
- add assert to prevent creating jobs with WM_JOB_TYPE_ANY, which should only be used for finding jobs.
Storing this list in the node has the advantage of requiring far fewer calls to the potentially expensive internal_connect callback. This was called on every node redraw ...
Also it will allow Cycles to properly use the internal links for muted nodes, which ensures consistent behavior. The previous method was not applicable in Cycles because transient list return values are not supported well in the RNA and particularly the C++ API implementation.
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
Note: While renaming DNA properties is usually dangerous and can break files, in this case it is possible because the mx/my values are only used at runtime.
Issue was caused by threading conflict between compositor output node which
is freeing buffers used by render result image and image draw code which
could use buffers at the same time as compositor frees this buffers.
Solved by adding adding lock around viewer image invalidation and image
drawing.
Use renamed LOCK_PREVIEW mutex for this, which si not called LOCK_DRAW_IMAGE.
With new compositor locking for preview is not needed so it could be removed.
Added the same lock around viewer operation which also frees buffers used
by viewer image. It's actually quite difficult to check whether this is
indeed needed. This code seems to be using acquire/release technique, but
somehow acquiring ImBuf before invalidating it in compositor operation
doesn't resolve the issue, so probably it's not actually locking acquire
and things should be checked deeper.
The transform operators in nodes will now use the unselected nodes to generate snapping points. Unlike object snapping, node snapping works for the x/y axes separately and snaps node borders to same borders of unselected nodes. The sensitive area for node borders extends over the whole view2D range, to enable simple alignment of nodes in both x and y direction.
For snap points in the node editor an additional enum value is stored to indicate the type of node border (left/right/top/bottom). This works as a constraint on possible node alignments: only same border types align with each other.
Snapping actually was working already, but grid spacing was set to 1.0, which is basically pixel size in the node editor. Increased this to 1x grid step for fine snapping and 5x grid step for rough snapping.
Grid drawing in node editor now draws 2 levels in slightly different shades to indicate the different snapping modes better.
Node editor also supports the general use_snap tool setting to enable automatic snapping during transform. For now only the incremental snapping is supported, in future could be extended to enable alignment between nodes in a number of ways.
By holding shift and "cutting" a node link a new reroute helper node can be inserted. This consists of a single socket that can be used to insert additional connection points into a link. This can be used to keep a connection point in the tree when deleting a node, or to control the path of long connections for layout cleanup.
For an detailed user-level description of new features see the following blogpost:
http://code.blender.org/index.php/2012/05/node-editing-tweaks/
TL;DR:
* Frame node gets more usable bounding-box behavior
* Node resizing has helpful mouse cursor indicators and works on all borders
* Node selection/active colors are themeable independently
* Customizable background colors for nodes (useful for frames visual
distinction).
This operator still had some built-in assumptions about the connectivity of input/output sockets (1-to-n in all current node systems). For future node systems (e.g. flow-based particles) and for general customizable nodes the operator is now fully symmetric and supports all kinds of connectivity limits (1:1, 1:n, m:1, m:n).
The operator data can also store a list of node links as opposed to a single link now, so that multiple links can be redirected at once. Holding the CTRL key when clicking a socket, all links from/to that socket are detached and can be moved to a different socket. This is useful for quickly appending a node without moving every individual link.
* Removed the struct_type identifier from sockets completely. Any specialization of socket types can be done by using separate collections in RNA and customized socket draw callbacks in node type. Sockets themselves are pure data inputs/outputs now. Possibly the sock->storage data could also be removed, but this will change anyway with id properties in custom nodes.
* Replaced the direct socket button draw calls by extra callbacks in node types. This allows nodes to draw sockets in specialized ways without referring to the additional struct_type identifier. Default is simply drawing the socket default_value button, only file output node overrides this atm.
* File output node slots now use a separate file sub-path in their storage data, instead of using the socket name. That way the path is an actual PROP_FILEPATH property and it works better with the UI list template (name property is local to the data struct).
* Node draw contexts for options on the node itself and detail buttons in the sidebar now have an extra context pointer "node" (uiLayoutSetContextPointer). This can be used to bind operator buttons to a specific node, instead of having to rely on the active/selected node(s) or making weak links via node name. Compare to modifiers and logic bricks, they use the same feature.
* Added another operator for reordering custom input slots in the file output node.
*Add menu is now translated.
*Nodes' title is now translated.
*Nodes' sockets' labels are now translated.
However, about the last point, and unless I’m mistaking, we’ll have to add the "i18n tag" N_() to all sockets' names, in the input/ouput templates declaration, in all nodes' files, as those sockets are collections created at runtime, I think po-generating script has no way to access that from bpy.types... Quite a piece of (borring) work. :/
Socket selection is indicated by a simple white highlight circle.
Multiple inputs can be selected by holding SHIFTKEY (just like regular node select). Only one output socket can be selected at a time for each node, but several outputs in different nodes are allowed.
The auto-connect operator will prefer selected sockets on nodes for creating links. If either the output or input side have no selected sockets it will fall back to the previous behavior of chosing 'best' sockets first (colors, then vectors, then values). This could be improved in the future, but is out of scope here.
There are a number of features that use a kind of "internal linking" in nodes:
1. muting
2. delete + reconnect (restore link to/from node after delete)
3. the new detach operator (same as 2, but don't delete the node)
The desired behavior in all cases is the same: find a sensible mapping of inputs-to-outputs of a node. In the case of muting these links are displayed in red on the node itself. For the other operators they are used to relink connections, such that one gets the best possible ongoing link between previous up- and downstream nodes.
Muting previously used a complicated callback system to ensure consistent behavior in the editor as well as execution in compositor, shader cpu/gpu and texture nodes. This has been greatly simplified by moving the muting step into the node tree localization functions. Any muted node is now bypassed using the generalized nodeInternalRelink function and then removed from the local tree. This way the internal execution system doesn't have to deal with muted nodes at all, as if they are non-existent.
The same function is also used by the delete_reconnect and the new links_detach operators (which work directly in the editor node tree). Detaching nodes is currently keymapped as a translation variant (macro operator): pressing ALTKEY + moving node first detaches and then continues with regular transform operator. The default key is ALT+DKEY though, instead ALT+GKEY, since the latter is already used for the ungroup operator.
Unlike the existing file output node this node has an arbitrary number of
possible input slots. It has a base path string that can be set to a general
base folder. Every input socket then uses its name as an extension of the base
path for file organization. This can include further subfolders on top of the
base path. Example:
Base path: '/home/user/myproject'
Input 1: 'Compo'
Input 2: 'Diffuse/'
Input 3: 'details/Normals'
would create output files
in /home/user/myproject: Compo0001.png, Compo0002.png, ...
in /home/user/myproject/Diffuse: 0001.png, 0002.png, ... (no filename base
given)
in /home/user/myproject/details: Normals0001.png, Normals0002.png, ...
Most settings for the node can be found in the sidebar (NKEY). New input sockets
can be added with the "Add Input" button. There is a list of input sockets and
below that the details for each socket can be changed, including the sub-path
and filename. Sockets can be removed here as well. By default each socket uses
the render settings file output format, but each can use its own format if
necessary.
To my knowledge this is the first node making use of such dynamic sockets in
trunk. So this is also a design test, other nodes might use this in the future.
Adding operator buttons on top of a node is a bit unwieldy atm, because all node
operators generally work on selected and/or active node(s). The operator button
would therefore either have to make sure the node is activated before the
operator is called (block callback maybe?) OR it has to store the node name
(risky, weak reference). For now it is only used in the sidebar, where only the
active node's buttons are displayed.
Also adds a new struct_type value to bNodeSocket, in order to distinguish
different socket types with the same data type (file inputs are SOCK_RGBA color
sockets). Would be nicer to use data type only for actual data evaluation, but
used in too many places, this works ok for now.
