Caused by {rB2917f550caa9} which renamed the entry in the toolsystem,
but not the corresponding keymap.
Maniphest Tasks: T86548
Differential Revision: https://developer.blender.org/D10725
Following concerns raised in the commit that changed the name initially,
rB2e19509e60b39837, it makes more sense to keep the "Surface" name for
this node because it has a specific meaning that should not be confused
with other types of subdivision.
Changes include:
- Use `IFACE_` for UI labels set in the modifier panels
- Use a sub-sub-panel for transparency
- Fix grammar and spelling mistakes
- Use more natural user-friendly wording
- Make descriptions more specific and more useful
- Don't capitalize "line art" in descriptions (tooltips)
These changes are aimed at making the UI strings more consistent with
the rest of the UI and being more helpful to someone trying to understand
how to use the modifier.
Differential Revision: https://developer.blender.org/D10750
This patch adds the ability to mute individual wires in the node editor.
This is invoked like the cut links operator but with a new shortcut.
Mute = Ctrl + Alt
Cut = Ctrl
Dragging over wires will toggle the mute state for that wire.
The muted wires are drawn in red with a bar across the center.
Red is used in the nodes context to indicate invalid links, muted links and internal links.
When a wire is muted it exposes the original node buttons which are normally hidden when a wire is connected.
Downstream and upstream links connected using reroute nodes are also muted.
Outside scope of patch:
- Add support for pynodes e.g. Animation Nodes
- Requires minor change to check for muted links using the `is_muted` link property or the `is_linked` socket property.
Maniphest Tasks: T52659
Differential Revision: https://developer.blender.org/D2807
This change shows the object or material name with the cursor when picking for a cryptomatte node.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D10705
This commit includes nodes to build the following primitives:
- Cone
- Cylinder
- Circle
- Cube
- UV Sphere
- Ico Sphere
- Line
- Plane/Grid
In general the inputs are the same as the corresponding operators
in the 3D view.
**Line Primitive**
The line primitive has two modes-- adding vertices between two end
points, or adding vertices each at an offset from the start point.
For the former mode, there is a choice between a vertex count
and a distance between each point.
**Plane Primitive**
This commit includes the "Plane" and "Grid" primitives as one node.
Generally primitives are named after the simpler form of the shape they
create (i.e. "Cone" can make some more complex shapes). Also, generally
you want to tweak the number of subdivisions anyway, so defaulting to
plane is not an inconvenience. And generally having fewer redundant
base primitives is better.
**Future Improvements**
A following patch proposes to improve the speed of the cylinder, cone,
and sphere primitives: D10730. Additional possible future improvements
would be adding subdivisions to the cube node and rings to the cone
and cylinder nodes.
Differential Revision: https://developer.blender.org/D10715
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
Add implicit `int32 to Color4f` conversion. Matches `int32 to float3` conversion logic.
This may not be the most useful conversion but prevents an error in the Attribute Convert node.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10686
Build proxies automatically when added to sequencer timeline and when
switching preview size.
This behavior can be disabled in user preferences.
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10363
- Remove Full Render size from VSE preview size. Use just 100% instead.
- Add Use Proxies checkbox to control whether proxies are used globally
- Move preview size to top so it is most prominent
- Set default to 100% preview size and use proxies
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10362
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
There are two caveats of the current implementation which still need
to be resolved in a separate step:
* In theory the data on the original object can be editable in the spreadsheet.
* If a complex object is in edit mode, and its original data is displayed,
the drawing code can be slow, because the bmesh is converted to a mesh
every time. The proper solution is to draw the data from the bmesh directly.
This should become easier after an upcoming refactor.
Ref T86141.
Differential Revision: https://developer.blender.org/D10701
Currently (in geometry nodes) you can delete the group input or group
output nodes with no way to get them back without copy and paste. This
adds them to the "Group" submenu of the add menu so at least there is
a way to add them back.
Additionally, these nodes are moved to the "Group" submenu for all node
editors. This makes sense since they are not like the other input or
output nodes, they really just relate to how groups are organized.
Differential Revision: https://developer.blender.org/D10241
The Attribute Convert node provides functionality to change attributes
between different domains and data types. Before it was impossible to
write to a UV Map attribute with the attribute math nodes since they
did not output a 2D vector type. This makes it possible to
"convert into" a UV map attribute.
The data type conversion uses the implicit conversions provided by
`\nodes\intern\node_tree_multi_function.cc`.
The `Auto` domain mode chooses the domain based on the following rules:
1. If the result attribute already exists, use that domain.
2. If the result attribute doesn't exist, use the source attribute domain.
3. Otherwise use the default domain (points).
See {T85700}
Differential Revision: https://developer.blender.org/D10624
This operator initializes mask values for the entire mesh. It supports
different modes for initializing those values, and more will be added in
the future.
The initial version supports generating a random mask per vertex, Face
Sets or loose parts. These masks are useful for introducing variations
in the model using the filters (both shapes and colors).
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10679
There is no reason to hide the 'Scale' and 'Scale Randomness' options
for fluid particles that are rendered as 'Object'.
It is possible that hiding these options was just an oversight and
not intentional.
This patch adds a node, that removes an attribute if possible,
otherwise it adds an error message.
Differential Revision: https://developer.blender.org/D10697
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
This adds an extra option to the Face Sets Init operator to initialize
individual Face Sets based on the current Face Sets boundaries.
In particular, this is useful for splitting the patterns created by
Expand into individual Face Sets for further editing.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10608
Auto frees cryptomatte session when it the pointer is collected from the
stack.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D10667
Prior to rB99a7c917eab7, Shift + D was used to set detail size for both
constant and relative detail (using radial control). The commit added an
improved operator for doing this for constant detail (showing the
triangle grid representation), but left the user without a shortcut to
do this for relative detail.
Interestingly rB99a7c917eab7 only changed this for the Blender keymap,
the Industy Compatible keymap still has the "old" entry.
This patch changes both keymaps to have both entries.
For user experience, the real change here is to have both available on
one 'primary' shortcut (Shift+D), the improved
'dyntopo_detail_size_edit' operator will now act on all possible cases.
If it deals with constant detail, it acts as before, if it deals with
relative detail etc, it will fallback to the "old" way of doing it via
radial control instead. I assume this adresses what was stated in
rB99a7c917eab7: "Deciding if both detail sizes can be unified needs a
separate discussion"
Also, move dyntopo_detail_size_edit to sculpt_detail.c
Fixes T83828
Maniphest Tasks: T83828
Differential Revision: https://developer.blender.org/D9871
In {rBb279fef85d1a} the button that displays a texture in a Properties
Editor texture tab was added for geometry nodes.
Same commit will actually show them for Brush textures as well (but
disabled -- because the Texture users dont match).
This task is for finanlizing proper support for Brush textures as well.
There was originally a separate patch for this (see {D9813}) but most of
it was already implemented by above commit.
**what this solves**
from the default startup file:
- go to any sculpt or paint mode and add a texture to your brush
- observe the button to edit this texture in the Properties editor is
greyed out
{F9860470}
There are two possible solutions:
- [1] call the texture template for the brush `texture_slot` texture
(instead of the brush 'texture') from the python UI code, this is then
working in harmony how ButsTextureUser works for brushes
- [2] tweak the way `ButsTextureUser` works (dont rely on
`RNA_BrushTextureSlot` there)
This patch implements the first solution.
Since `brush.texture_slot` is `br->mtex` RNA wrapped and `brush.texture`
is `br->mtex.tex` RNA wrapped, this really comes down to doing the same
thing. I checked that creating a new texture and unlinking/deleting will
have the same results even though they take slightly different code
paths: assignment and NULLing the pointers are working on the same (see
above) and RNA update callbacks also do the same [even though in
different functions]:
- brush.texture will do rna_Brush_main_tex_update
- brush.texture_slot.texture will do rna_TextureSlotTexture_update /
rna_TextureSlot_update
(only difference here is an additional DEG relations update in the case
of texture_slot which should not do harm)
Differential Revision: https://developer.blender.org/D10626
This makes the following changes to the name of the two
geometry nodes subvision nodes:
- `Subdivision Surface` -> `Subdivide Smooth`
- `Subdivision Surface Simple` -> `Subdivide`
Most of the benefit is that the names are shorter, but it also better
mirrors the naming of operations in edit mode, and phrases the names
more like actions. This was discussed with the geometry nodes team.
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
Add operator `FILE_OT_view_selected` to the file browser (and thus also
to the asset browser) that scrolls selected files into view.
This includes the active file, even though it is not selected. In
certain cases the active file can loose its selected state (clicking
next to it, or refreshing the asset browser), but then it's still shown
in the right-hand sidebar. Because of this, I found it important to take
it into account when scrolling.
This also includes a change to the keymaps:
- Blender default: {key NUMPAD_PERIOD} is removed from the "reload"
operator, and assigned to the new "view selected files" operator. The
reload operator was already doubly bound, and now {key R} is the only
remaining hotkey for it.
- Industry compatible: {key F} is assigned to the new "view selected
files" operator. This is consistent with the other "view selected"
operators in other editors.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10583
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
