This patch adds the ability to mute individual wires in the node editor.
This is invoked like the cut links operator but with a new shortcut.
Mute = Ctrl + Alt
Cut = Ctrl
Dragging over wires will toggle the mute state for that wire.
The muted wires are drawn in red with a bar across the center.
Red is used in the nodes context to indicate invalid links, muted links and internal links.
When a wire is muted it exposes the original node buttons which are normally hidden when a wire is connected.
Downstream and upstream links connected using reroute nodes are also muted.
Outside scope of patch:
- Add support for pynodes e.g. Animation Nodes
- Requires minor change to check for muted links using the `is_muted` link property or the `is_linked` socket property.
Maniphest Tasks: T52659
Differential Revision: https://developer.blender.org/D2807
This way we get a choice when we click on node links in the Properties
Editor.
This also changes some of the more permissive poll functions on some
nodes back to being "shading-only" (these were made permissive in
rBb78f2675d7e5 for simulation nodes, but have not found their way into
geometry nodes yet).
ref b279fef85d / T86416 / D10671
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10673
The actual sample count is rounded up to a multiple of 4 because we
sample 4 horizons directions.
Changing this setting forces the shader to recompile (because using a
GPU_constant).
This is a complete rewrite of the derived node tree data structure.
It is a much thinner abstraction about `NodeTreeRef` than before.
This gives the user of the derived node tree more control and allows
for greater introspection capabilities (e.g. before muted nodes were
completely abstracted away; this was convenient, but came with
limitations).
Another nice benefit of the new structure is that it is much cheaper
to build, because it does not inline all nodes and sockets in nested
node groups.
Differential Revision: https://developer.blender.org/D10620
Reflection
Anisotropic is not really supported in Eevee, but since code looks like
it is just intended to make it behave like glossy, it should function
like it too.
Seems like the internal calling from `node_bsdf_glossy` from
`node_bsdf_anisotropic` has swapped arguments.
Also: ssr_id is available for SH_NODE_BSDF_ANISOTROPIC as well (see
`ntree_tag_bsdf_cb`), so why not use it?
Maniphest Tasks: T84658
Differential Revision: https://developer.blender.org/D10547
This adds an approximation of inverted AO by reversing the max horizon
search (becoming a min horizon). The horizons are correctly clamped in
the reverse direction to the shading and geometric normals.
The arc integration is untouched as it seems to be symetrical.
The limitation of this technique is that since it is still screen-space
AO you don't get other hidden surfaces occlusion. This is more
problematic in the case of inverted AO than for normal AO but it's
better than no support AO.
Support of distance parameter was easy thanks to recent AO refactor.
This refactor was needed for some reasons:
- closure_lit_lib.glsl was unreadable and could not be easily extended to use new features.
- It was generating ~5K LOC for any shader. Slowing down compilation.
- Some calculations were incorrect and BSDF/Closure code had lots of workaround/hacks.
What this refactor does:
- Add some macros to define the light object loops / eval.
- Clear separation between each closures which now have separate files. Each closure implements the eval functions.
- Make principled BSDF a bit more correct in some cases (specular coloring, mix between glass and opaque).
- The BSDF term are applied outside of the eval function and on the whole lighting (was separated for lights before).
- Make light iteration last to avoid carrying more data than needed.
- Makes sure that all inputs are within correct ranges before evaluating the closures (use `safe_normalize` on normals).
- Making each BSDF isolated means that we might carry duplicated data (normals for instance) but this should be optimized by compilers.
- Makes Translucent BSDF its own closure type to avoid having to disable raytraced shadows using hacks.
- Separate transmission roughness is now working on Principled BSDF.
- Makes principled shader variations using constants. Removing a lot of duplicated code. This needed `const` keyword detection in `gpu_material_library.c`.
- SSR/SSS masking and data loading is a bit more consistent and defined outside of closure eval. The loading functions will act as accumulator if the lighting is not to be separated.
- SSR pass now do a full deferred lighting evaluation, including lights, in order to avoid interference with the closure eval code. However, it seems that the cost of having a global SSR toggle uniform is making the surface shader more expensive (which is already the case, by the way).
- Principle fully black specular tint now returns black instead of white.
- This fixed some artifact issue on my AMD computer on normal surfaces (which might have been some uninitialized variables).
- This touched the Ambient Occlusion because it needs to be evaluated for each closure. But to avoid the cost of this, we use another approach to just pass the result of the occlusion on interpolated normals and modify it using the bent normal for each Closure. This tends to reduce shadowing. I'm still looking into improving this but this is out of the scope of this patch.
- Performance might be a bit worse with this patch since it is more oriented towards code modularity. But not by a lot.
Render tests needs to be updated after this.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10390
# Conflicts:
# source/blender/draw/engines/eevee/eevee_shaders.c
# source/blender/draw/engines/eevee/shaders/common_utiltex_lib.glsl
# source/blender/draw/intern/shaders/common_math_lib.glsl
When clamp is enabled, it should clamp between the output min and max
and not between 0 and 1.
Differential Revision: https://developer.blender.org/D10324
When the displacement space is set to SHD_SPACE_WORLD, the GLSL method
"node_displacement_world" is used instead of the "node_displacement_object" method. The two GLSL methods:
```
void node_displacement_object(
float height, float midlevel, float scale, vec3 N, mat4 obmat, out vec3 result)
{
N = (vec4(N, 0.0) * obmat).xyz;
result = (height - midlevel) * scale * normalize(N);
result = (obmat * vec4(result, 0.0)).xyz;
}
void node_displacement_world(float height, float midlevel, float scale, vec3 N, out vec3 result)
{
result = (height - midlevel) * scale * normalize(N);
}
```
In contrast to the "node_displacement_object" method, the "node_displacement_world"
does not require an "obmat" parameter. Attempting to still pass "GPU_builtin(GPU_OBJECT_MATRIX)"
as additional parameter will result in a memory leak. The "GPUNodeLink" allocated in
the "GPU_builtin" method will never get released.
Fixes T83941 Memory leak when using the Displacement shader node in Eevee with the displacement
space set to "World Space"
In glsl the clamp function has undefined behavior when min > max. For
the clamp node this resulted in differences between cycles and eevee.
This patch adds the expected implementation for minmax.
The old clamp function is still used in cases where we know for certain
that the input values are correct (math node clamp option). GPU uses
optimized code and silicon in these cases.
This patch adds support for AOVs in EEVEE. AOV Outputs can be defined in the
render pass tab and used in shader materials. Both Object and World based
shaders are supported. The AOV can be previewed in the viewport using the
renderpass selector in the shading popover.
AOV names that conflict with other AOVs are automatically corrected. AOV
conflicts with render passes get a warning icon. The reason behind this is that
changing render engines/passes can change the conflict, but you might not notice
it. Changing this automatically would also make the materials incorrect, so best
to leave this to the user.
**Implementation**
The patch adds a copies the AOV structures of Cycles into Blender. The goal is
that the Cycles will use Blenders AOV defintions. In the Blender kernel
(`layer.c`) the logic of these structures are implemented.
The GLSL shader of any GPUMaterial can hold multiple outputs (the main output
and the AOV outputs) based on the renderPassUBO the right output is selected.
This selection uses an hash that encodes the AOV structure. The full AOV needed
to be encoded when actually drawing the material pass as the AOV type changes
the behavior of the AOV. This isn't known yet when the GLSL is compiled.
**Future Developments**
* The AOV definitions in the render layer panel isn't shared with Cycles.
Cycles should be migrated to use the same viewlayer aovs. During a previous
attempt this failed as the AOV validation in cycles and in Blender have
implementation differences what made it crash when an aov name was invalid.
This could be fixed by extending the external render engine API.
* Add support to Cycles to render AOVs in the 3d viewport.
* Use a drop down list for selecting AOVs in the AOV Output node.
* Give user feedback when multiple AOV output nodes with the same AOV name
exists in the same shader.
* Fix viewing single channel images in the image editor [T83314]
* Reduce viewport render time by only render needed draw passes. [T83316]
Reviewed By: Brecht van Lommel, Clément Foucault
Differential Revision: https://developer.blender.org/D7010
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
This patch allows the user to type a property name into the
Attribute node, which will then output the value of the property
for each individual object, allowing to e.g. customize shaders
by object without duplicating the shader.
In order to make supporting this easier for Eevee, it is necessary
to explicitly choose whether the attribute is varying or uniform
via a dropdown option of the Attribute node. The dropdown also
allows choosing whether instancing should be taken into account.
The Cycles design treats all attributes as one common namespace,
so the Blender interface converts the enum to a name prefix that
can't be entered using keyboard.
In Eevee, the attributes are provided to the shader via a UBO indexed
with resource_id, similar to the existing Object Info data. Unlike it,
however, it is necessary to maintain a separate buffer for every
requested combination of attributes.
This is done using a hash table with the attribute set as the key,
as it is expected that technically different but similar materials
may use the same set of attributes. In addition, in order to minimize
wasted memory, a sparse UBO pool is implemented, so that chunks that
don't contain any data don't have to be allocated.
The back-end Cycles code is already refactored and committed by Brecht.
Differential Revision: https://developer.blender.org/D2057
Add a new Alpha socket to the Attribute node that outputs the
fourth component of the attribute. Currently the only such
attribute is vertex color, but there may be more in the future.
If the attribute has no alpha channel, the expected value is 1.
The Cycles code is already refactored and committed by Brecht.
Ref D2057
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
Based on http://jcgt.org/published/0008/01/03/
This is a simple trick that does *not* have a huge performance impact but
does work pretty well. It just modifies the Fresnel term to account for
the multibounce energy loss (coloration).
However this makes the shader variations count double. To avoid this we
use a uniform and pass the multiscatter use flag inside the sign of f90.
This is a bit hacky but avoids many code duplication.
This uses the simplification proposed by McAuley in
A Journey Through Implementing Multiscattering BRDFs and Area Lights
This does not handle area light differently than the IBL case but that's
already an issue in current implementation.
This is related to T68460.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8912
This follows the GPU module naming of other buffers.
We pass name to distinguish each GPUUniformBuf in debug mode.
Also remove DRW_uniform_buffer interface.
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
When disconnecting links for defaulted node group inputs, recurse
into the nested node group nodes, instead of checking the socket
flag. Otherwise the behavior is confusing and differs from Cycles.
Differential Revision: https://developer.blender.org/D8455
The abbreviation 'init' is brief, unambiguous and already used
in thousands of places, also initialize is often accidentally
written with British spelling.
- add the use of DRWShaderLibrary to EEVEE's glsl codebase to reduce code
complexity and duplication.
- split bsdf_common_lib.glsl into multiple sub library which are now shared
with other engines.
- the surface shader code is now more organised and have its own files.
- change default world to use a material nodetree and make lookdev shader
more clear.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8306
This is also a bit of code cleanup, reorganisation.
Tried to be DRYed but avoid too much code change to (hopefully) minimize
breakage.
- GPU: remove TEXTARGET_CUBE_MAP, this is no longer used in the codebase.
- GPUTexture: Move compressed texture upload to gpu_texture.cc
- GPUTexture: Add per texture Anisotropic filtering switch
The sky will appear brighter than before by default. To compensate for this,
lower exposure in the Film panel. The default altitude was also changed from
90 to 15 degrees.
Patch contributed by Marco with the help of Ryan Jones.
Differential Revision: https://developer.blender.org/D8285
This updates the usage of integer types in code I wrote according to our new style guides.
Major changes:
* Use signed instead of unsigned integers in many places.
* C++ containers in blenlib use `int64_t` for size and indices now (instead of `uint`).
* Hash values for C++ containers are 64 bit wide now (instead of 32 bit).
I do hope that I broke no builds, but it is quite likely that some compiler reports
slightly different errors. Please let me know when there are any errors. If the fix
is small, feel free to commit it yourself.
I compiled successfully on linux with gcc and on windows.
This also introduces the `blender::nodes` namespace. Eventually,
we want to move most/all of the node implementation files into
this namespace.
The reason for this file-move is that the code fits much better
into the `nodes` directory than in the `blenkernel` directory.
