Refactoring: WM_window_open() that can open different types of windows. 'New Window' with simplified layout.
Differential Revision: https://developer.blender.org/D10419
Reviewed by Brecht Van Lommel
This could happen with files saved before ef4aa42ea4, so before global areas
were written to .blend files.
We would just always add the top- and status-bar, even though the screen wasn't
supposed to have them. I'm not entirely sure what caused the further issues
observed there, most code should probably handle the case fine still. But
apparently something didn't.
Steps to reproduce were:
* Open Blender from before ef4aa42ea4 (e.g 2.91 release)
* In 3D View, View > Area > Toggle Fullscreen Area
* Save the file
* Open the saved file (can be in newer version too)
The fullscreen is corrupt now, especially noticable after duplicating the
workspace.
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", opening a File Browser from a File or Asset Browser as
regular editor would cause some issues. For example after closing the
temporary File Browser, the regular browser would take over the file
path and display settings from the temporary one. This is because they
used to share the same area data.
Some similar issues may have happend with temporary image editors.
Now, this commit finally separates the space data of temporary maximized
editors from the regular ones. So the editor data is entirely
independent now, as it should be.
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", opening a File Browser from an Asset Browser would
cause the new maximized editor to be an Asset Browser. Exiting it again
would crash.
This fixes the wrong behavior and the crash. There's still an issue with
exiting the editor again, it stays a File Browser then and doesn't go
back to being an Asset Browser. That's to be fixed separately.
As proposed in T74432 and already implemented in several commits,
"region" is the preferred name for `ARegion` variables, rather than
any variant of "ar". This commit changes a few "ar" variables that have
popped up over time and also adjusted names of variants like "arnew".
If current frame is set to before start frame, with AV sync there is
delay when playback is started.
Tag scene with ID_RECALC_AUDIO_SEEK, so audio playback starts from
correct position.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8809
This reverts {rB1693a5efe91999b60b3dc0bdff727473b3bd00bb}
and implements an alternative solution.
The old patch had the problem that the depsgraph would always
evaluate at the current frame of the original scene (even when
`DEG_evaluate_on_framechange` was used). Now it is possible
to evaluate the depsgraph at a specific frame without having to
change the original scene.
Reviewers: sergey, sybren
Differential Revision: https://developer.blender.org/D8616
This reverts commit 52f40bcff2.
Apologies for the noise. I caught a problem with this that I hadn't before. I will
commit later after thorough testing.
Mainly caused by moving tests to source folder, which brings
new compiler flags.
Also, no need to extend include directories (to the non-existing paths,
btw) since this is done by the CmakeList.txt which is in the blenlib folder.
When switching workspaces we need to have an unused screen layout that
we can activate. The other window now showed the only available screen
layout in fullscreen though.
Usually when there's no unused screen layout we duplicate an existing
one, but that code didn't respect the fullscreen case properly.
This also tries to clean up the logic a bit, but things are still rather
complicated to follow.
Changes in this code are always risky. Of course things worked fine in
my tests, but I wouldn't be surprised if something breaks.
The data member `new` was conflicting with the `new` keyword
when `BKE_screen.h` was included in C++ files.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D8459
The abbreviation 'init' is brief, unambiguous and already used
in thousands of places, also initialize is often accidentally
written with British spelling.
Properly align every involved edge when performing 'tolerant' area joins.
Differential Revision: https://developer.blender.org/D7859
Reviewed by Brecht Van Lommel
Allow use of the full width of visible borders when dragging to resize areas.
Differential Revision: https://developer.blender.org/D7823
Reviewed by Brecht Van Lommel
The problem comes from the fact by no data being modified when switching
viewlayers.
To follow what the external render engines do, we completely reset the
viewport by freeing the GPUViewport to avoid any cached data from being
kept.
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
While it might be handy to have type-less functionality which is
similar to how C++ math is implemented it can not be easily achieved
with just preprocessor in a way which does not have side-effects on
wrong usage.
There macros where often used on a non-trivial expression, and there
was at least one usage where it was causing an actual side effect/bug
on Windows (see change around square_f(sh[index++]) in studiolight.c).
For such cases it is handy to have a function which is guaranteed to
have zero side-effects. The motivation behind actually removing the
macros is that there is already a way to do similar calculation. Also,
not having such macros is a way to guarantee that its usage is not
changed in a way which have side-effects and that it's not used as an
inspiration for cases where it should not be used.
Differential Revision: https://developer.blender.org/D7051
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
Part of https://developer.blender.org/T74429.
There's a chance that this causes some issues becaue in some cases we
change from getting the window from context to getting it from somewhere
else.
- Move gizmo cursor check into ED_region_cursor_set so the result of
calling this function is the same as flagging for cursor update.
- Use tagging in ui_popup_block_remove which avoids adding a
mouse-move event in case the cursor needs to be changed again.
What I removed here used to be needed in an earlier version of the
patch, to avoid use-after-frees. This is not the case anymore, so it
seems we can remove this.
Generally the context region code is very weak and inconsistent. If
things were done properly, the line I added shouldn't cause issues -
it's logically correct.
Also fixes T73475.
To issues caused this:
* The code to launch the filebrowser from a button didn't respect popup
menus stored in context
* There was actually no popup menu region stored in context for this
case. Doing so *may* introduce other issues, but the way I did things
already fixes all issues I've found.
To recreate the main issue:
* Set render and file browser to show in full-screen in the preferences
* Default scene, press F12 in 3D View
* Press Alt+S to save the image
* Escape the file browser
* Escape the image editor
The former 3D View would now show the image editor. This is a common
use-case that should work.
Full-screen code is a hassle to get to work as expected. There are
reports from 2.5, I did lots of work years ago to get these kind of
use-cases to work fine. But apparently I broke this one with a fix for
another common use-case in March (0a28bb1422).
This now stores hints in the space, rather than the area, which should
make things much more controlable and hopefully help us fix issues like
this.
Here are a few references describing further common issues (all should
work fine now): 0a28bb1422, e61588c5a5, T19296
Checked over this with Bastien, we agreed that at some point we should
do a big rewrite of all of this, for now this is acceptable.
For many users, this will make the File Browser window behave more like
what they would expect. It addresses the issue of the File Browser
becoming hidden behind the main window by clicking anywhere in the
latter. It communicates the interruptive, but temporary nature of the
operation a bit better.
Further, on tiling window managers the File Browser now opens as
floating by default, like in other applications.
Note that this also makes sure the File Browser is always opened as
separate window, so it doesn't re-use the Preferences, or any other
temporary window anymore. This seems to have been a common annoyance.
More concretely, this makes the File Browser window behave as follows:
* Stays on top of its parent Blender window, but not on top of
non-Blender windows.
* Minimizes with its parent window
* Can be moved independently
* Doesn't add an own item in task bars
* Doesn't block other Blender windows (we may want to have this though)
* Opens as floating window for tiling window managers (e.g. i3wm/Sway)
Further notes:
* When opening a file browser from the Preference window (or any
temporary window), the main window, as the file browsers parent is
moved on top of the Preferences, which makes it seem like the
Preferences were closed. This is the general issue of bad secondary
window handling as window activation changes. I made it so that the
window is moved back once the file browser is closed.
This behavior is confusing and would be nice to avoid. It's a separate
issue though.
* On most window managers on Linux the temporary window can not be
minimized and maximized, they disable that for dialog windows.
* On Windows and macOS, only minimizing is disabled, as there is no
decent way yet to restore a window if it's not shown in the taskbar.
Reviewed By: Brecht van Lommel, Campbell Barton, William Reynish
Edits and macOS implementation by Brecht.
Differential Revision: https://developer.blender.org/D5810
Part of T69652.
There was a mix of old and new constants. Now have one list of WM_CURSOR_*
cursor types, using GHOST standard cursors when available and otherwise falling
back to our custom cursors.
Ref D5197
