Grease Pencil is a tool which allows you to draw freehand in some views, allowing you to annotate/scribble over the contents of that view in either 2d or 3d. This facilitates many easier communication and planning abilities.
To use, simply enable it from the View menu (choose 'Grease Pencil...' and click 'Use Grease Pencil'). Then, click+drag using the left-mouse button and the shift-key held to draw a stroke.
For more information, check the following page on the wiki:
http://wiki.blender.org/index.php/User:Aligorith/247_Grease_Pencil
General
=======
- Removal of Damp option in motion actuator (replaced by
Servo control motion).
- No PyDoc at present, will be added soon.
Generalization of the Lvl option
================================
A sensor with the Lvl option selected will always produce an
event at the start of the game or when entering a state or at
object creation. The event will be positive or negative
depending of the sensor condition. A negative pulse makes
sense when used with a NAND controller: it will be converted
into an actuator activation.
Servo control motion
====================
A new variant of the motion actuator allows to control speed
with force. The control if of type "PID" (Propotional, Integral,
Derivate): the force is automatically adapted to achieve the
target speed. All the parameters of the servo controller are
configurable. The result is a great variety of motion style:
anysotropic friction, flying, sliding, pseudo Dloc...
This actuator should be used in preference to Dloc and LinV
as it produces more fluid movements and avoids the collision
problem with Dloc.
LinV : target speed as (X,Y,Z) vector in local or world
coordinates (mostly useful in local coordinates).
Limit: the force can be limited along each axis (in the same
coordinates of LinV). No limitation means that the force
will grow as large as necessary to achieve the target
speed along that axis. Set a max value to limit the
accelaration along an axis (slow start) and set a min
value (negative) to limit the brake force.
P: Proportional coefficient of servo controller, don't set
directly unless you know what you're doing.
I: Integral coefficient of servo controller. Use low value
(<0.1) for slow reaction (sliding), high values (>0.5)
for hard control. The P coefficient will be automatically
set to 60 times the I coefficient (a reasonable value).
D: Derivate coefficient. Leave to 0 unless you know what
you're doing. High values create instability.
Notes: - This actuator works perfectly in zero friction
environment: the PID controller will simulate friction
by applying force as needed.
- This actuator is compatible with simple Drot motion
actuator but not with LinV and Dloc motion.
- (0,0,0) is a valid target speed.
- All parameters are accessible through Python.
Distance constraint actuator
============================
A new variant of the constraint actuator allows to set the
distance and orientation relative to a surface. The controller
uses a ray to detect the surface (or any object) and adapt the
distance and orientation parallel to the surface.
Damp: Time constant (in nb of frames) of distance and
orientation control.
Dist: Select to enable distance control and set target
distance. The object will be position at the given
distance of surface along the ray direction.
Direction: chose a local axis as the ray direction.
Range: length of ray. Objecgt within this distance will be
detected.
N : Select to enable orientation control. The actuator will
change the orientation and the location of the object
so that it is parallel to the surface at the vertical
of the point of contact of the ray.
M/P : Select to enable material detection. Default is property
detection.
Property/Material: name of property/material that the target of
ray must have to be detected. If not set, property/
material filter is disabled and any collisioning object
within range will be detected.
PER : Select to enable persistent operation. Normally the
actuator disables itself automatically if the ray does
not reach a valid target.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
rotDamp: Time constant (in nb of frame) of orientation control.
0 : use Damp parameter.
>0: use a different time constant for orientation.
Notes: - If neither N nor Dist options are set, the actuator
does not change the position and orientation of the
object; it works as a ray sensor.
- The ray has no "X-ray" capability: if the first object
hit does not have the required property/material, it
returns no hit and the actuator disables itself unless
PER option is enabled.
- This actuator changes the position and orientation but
not the speed of the object. This has an important
implication in a gravity environment: the gravity will
cause the speed to increase although the object seems
to stay still (it is repositioned at each frame).
The gravity must be compensated in one way or another.
the new servo control motion actuator is the simplest
way: set the target speed along the ray axis to 0
and the servo control will automatically compensate
the gravity.
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is
placed BEFORE the Drot motion actuator (the order of
actuator is important)
- All parameters are accessible through Python.
Orientation constraint
======================
A new variant of the constraint actuator allows to align an
object axis along a global direction.
Damp : Time constant (in nb of frames) of orientation control.
X,Y,Z: Global coordinates of reference direction.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
Notes: - (X,Y,Z) = (0,0,0) is not a valid direction
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is placed
BEFORE the Drot motion actuator (the order of
actuator is important).
- This actuator doesn't change the location and speed.
It is compatible with gravity.
- All parameters are accessible through Python.
Actuator sensor
===============
This sensor detects the activation and deactivation of actuators
of the same object. The sensor generates a positive pulse when
the corresponding sensor is activated and a negative pulse when
it is deactivated (the contrary if the Inv option is selected).
This is mostly useful to chain actions and to detect the loss of
contact of the distance motion actuator.
Notes: - Actuators are disabled at the start of the game; if you
want to detect the On-Off transition of an actuator
after it has been activated at least once, unselect the
Lvl and Inv options and use a NAND controller.
- Some actuators deactivates themselves immediately after
being activated. The sensor detects this situation as
an On-Off transition.
- The actuator name can be set through Python.
This patch introduces a simple state engine system with the logic bricks. This system features full
backward compatibility, multiple active states, multiple state transitions, automatic disabling of
sensor and actuators, full GUI support and selective display of sensors and actuators.
Note: Python API is available but not documented yet. It will be added asap.
State internals
===============
The state system is object based. The current state mask is stored in the object as a 32 bit value;
each bit set in the mask is an active state. The controllers have a state mask too but only one bit
can be set: a controller belongs to a single state. The game engine will only execute controllers
that belong to active states. Sensors and actuators don't have a state mask but are effectively
attached to states via their links to the controllers. Sensors and actuators can be connected to more
than one state. When a controller becomes inactive because of a state change, its links to sensors
and actuators are temporarily broken (until the state becomes active again). If an actuator gets isolated,
i.e all the links to controllers are broken, it is automatically disabled. If a sensor gets isolated,
the game engine will stop calling it to save CPU. It will also reset the sensor internal state so that
it can react as if the game just started when it gets reconnected to an active controller. For example,
an Always sensor in no pulse mode that is connected to a single state (i.e connected to one or more
controllers of a single state) will generate a pulse each time the state becomes active. This feature is
not available on all sensors, see the notes below.
GUI
===
This system system is fully configurable through the GUI: the object state mask is visible under the
object bar in the controller's colum as an array of buttons just like the 3D view layer mask.
Click on a state bit to only display the controllers of that state. You can select more than one state
with SHIFT-click. The All button sets all the bits so that you can see all the controllers of the object.
The Ini button sets the state mask back to the object default state. You can change the default state
of object by first selecting the desired state mask and storing using the menu under the State button.
If you define a default state mask, it will be loaded into the object state make when you load the blend
file or when you run the game under the blenderplayer. However, when you run the game under Blender,
the current selected state mask will be used as the startup state for the object. This allows you to test
specific state during the game design.
The controller display the state they belong to with a new button in the controller header. When you add
a new controller, it is added by default in the lowest enabled state. You can change the controller state
by clicking on the button and selecting another state. If more than one state is enabled in the object
state mask, controllers are grouped by state for more readibility.
The new Sta button in the sensor and actuator column header allows you to display only the sensors and
actuators that are linked to visible controllers.
A new state actuator is available to modify the state during the game. It defines a bit mask and
the operation to apply on the current object state mask:
Cpy: the bit mask is copied to the object state mask.
Add: the bits that set in the bit mask will be turned on in the object state mask.
Sub: the bits that set in the bit mask will be turned off in the object state mask.
Inv: the bits that set in the bit mask will be inverted in the objecyy state mask.
Notes
=====
- Although states have no name, a simply convention consists in using the name of the first controller
of the state as the state name. The GUI will support that convention by displaying as a hint the name
of the first controller of the state when you move the mouse over a state bit of the object state mask
or of the state actuator bit mask.
- Each object has a state mask and each object can have a state engine but if several objects are
part of a logical group, it is recommended to put the state engine only in the main object and to
link the controllers of that object to the sensors and actuators of the different objects.
- When loading an old blend file, the state mask of all objects and controllers are initialized to 1
so that all the controllers belong to this single state. This ensures backward compatibility with
existing game.
- When the state actuator is activated at the same time as other actuators, these actuators are
guaranteed to execute before being eventually disabled due to the state change. This is useful for
example to send a message or update a property at the time of changing the state.
- Sensors that depend on underlying resource won't reset fully when they are isolated. By the time they
are acticated again, they will behave as follow:
* keyboard sensor: keys already pressed won't be detected. The keyboard sensor is only sensitive
to new key press.
* collision sensor: objects already colliding won't be detected. Only new collisions are
detected.
* near and radar sensor: same as collision sensor.
Shape Action are now supported in the BGE. A new type of actuator "Shape Action" is available on mesh objects. It can be combined with Action actuator on parent armature. Only relative keys are supported. All the usual action options are available: type, blending, priority, Python API. Only actions with shape channels should be specified of course, otherwise the actuator has no effect. Shape action will still work after a mesh replacement provided that the new mesh has compatible shape keys.
sprintf(str, "/bin/su root -c 'cd %s; /bin/tar cf - \"%s\" | (/bin/cd %s; /bin/tar xf -)'", from, file, to);
return system(str);
This would ask for a password in blenders terminal, in ubuntu there is no root user...
If this feature is added back it should be written in a much nicer way.
Also made HKey toggle hidden files in the file selector.
=======================
Caching and Baking:
- The point cache is now cleared on DAG_object_flush_update(), and not cleared for time dependency graph updates.
- There is now a Bake button instead of Protect. Also cache start and end frames were added to softbody and particles.
- The cloth autoprotect feature was removed.
- The Ctrl+B menu now also bakes cloth and particles next to softbody and fluids. Additionally there are now frree bake and free cache menu entries.
- The point cache api has been changed. There is now a PTCacheID struct for each point cache type that can be filled and then used to call the point cache functions.
- PointCache struct was added to DNA and is automatically allocated for each physics type.
- Soft body now supports Bake Editing just like cloth.
- Tried to make the systems deal consistently with time ipo's and offsets. Still not sure it all works correct, but too complicated to solve completely now.
Library Linking:
- Added some more warnings to prevent editing settings on library linked objects.
- Linked objects now read from the cache located next to the original library file, and never write to it. This restores old behavior for softbodies. For local simulation the mesh and not the object should be linked.
- Dupligroups and proxies can't create local point caches at the moment, how to implement that I'm not sure. We probably need a proxy point cache for that to work (ugh).
Physics UI:
- Renamed deflection panel to collision for consistency and reorganized the buttons. Also removed some softbody collision buttons from the softbody panel that were duplicated in this panel for cloth.
- Tweaked field panel buttons to not jump around when changing options.
- Tabbing e.g. Soft Body Collision into the Soft Body panel, it now only shows Collision to make the panel names readable.
- I tried to make enabled/disabling physics more consistent, since all three system did things different. Now the two modifier buttons to enable the modifier for the viewport and rendering are also duplicated in the physics panels. Toggling the Soft Body and Cloth buttons now both remove their modifiers.
- Fixed modifier error drawing glitch.
Particles:
- Particles are now recalculated more often than before. Previously it did partial updates based on the changes, but that doesn't work well with DAG_object_flush_update() ..
- Fixed memory leak loading keyed particle system. Now keys are not written to file anymore but always created after loading.
- Make particle threads work with autothreads.
Continue Physics:
- The timeline play now has a Continue Physics option in the playback menu, which keeps the simulations going without writing them to the cache.
- This doesn't always work that well, some changes are not immediately updated, but this can be improved later. Still it's fun to get a feel for the physics.
Todo:
- Point cache can get out of sync with and undo and changing a file without saving it.
- Change the point cache file format to store a version (so old point cache files can be either converted or at least ignored), and to do correct endian conversion.
- Menu item and/or buttons for Ctrl+B.
- A system("rm ..") was changed to remove() since the former is very slow for clearing point caches. These system() calls were already giving trouble in a bug in the tracker, but really most use of this system("") should be changed and tested.
- The Soft Body Collision and Clot Collision panel titles don't mention there's point cache settings there too, doing that makes them unreadable with the default panel setup.. but may need to make the names longer anyway.
This patch consists in new KX_GameObject::SetParent() and KX_GameObject::RemoveParent() functions to create and destroy parent relation during game. These functions are accessible through python and through a new actuator KX_ParentActuator. Function documentation in PyDoc.
The object keeps its orientation, position and scale when it is parented but will further rotate, move and scale with its parent from that point on. When the parent relation is broken, the object keeps the orientation, position and scale it had at that time.
The function has no effect if any of the X/Y/Z scale of the object or its new parent are below Epsilon.
A lot of fixes for anim_startofs / anim_endofs:
* crashed when striplen was 0 and startstill / endstill still in use
* made it work for Audio (HD and RAM)
* made it work for Image Sequences
* added a new cutting tool, that uses anim_startofs / endofs instead of
startofs / endofs. This is now the default and called "hard cut"
* moved old cutting method to "Shift-K" and renamed it "soft cut"
Also scripts will re-run on undo rather then closing.
This is done by saving and loading the name of the script or textblock of the 'Script' datablock, connected to the ScriptSpace. This way when there is a name but the script dosnt run.
Blender runs the script or text block if available.
memory blocks anymore, but smaller fixed size blocks, so that diffing
can be more effective. For example helps in sculpt mode when making
only local changes to the mesh, previously it would copy the whole
MVert array for each undo step.
New feature: color balance aka 3-way-color-correction aka lift/gamma/gain
on input (folded into byte -> float conversion, so _very_ fast in that case).
Interface is inspired from Rebel CC (but not as complete yet, you can't
choose white and black points right now).
Bugfix: clamp color seperated wave form display correctly.
I'm committing some work-in-progress code for "bone groups" now, as I there have been are some major bugs caused by the timeoffset stuff (some of my test files were not loading, and other files were showing all sorts of weird problems).
Anyway, in this commit, the following things for "bone groups" have been done:
* Bone groups are stored per armature (internally, this is per bPose block)
* Added controls for editing bone-groups per armature - "add", "remove", "rename". These can be found in the "Links and Materials" panel in PoseMode, beside the settings for PoseLib.
* Reorganised buttons for editing selected bones in PoseMode. I've replaced the "dist" and "weight" buttons (they existed in EditMode anyway) with a menu to choose the bone-group and the custom-shape-ob field. In the place of the old custom-shape-ob field, I've restored the "Hide" button. This might break muscle-memory a bit, but there isn't a lot of space to play with there.
Some stuff I'd been originally planning to do before committing:
* When adding keyframes for bones, an action-group with the same name as the bone's group will be added to the action, and the action-channel will be made a member of that.
* New action/bone groups have unique names (renaming/adding new should check if name exists before assigning it)
* There's a setting under Bone-Groups stuff which sets which custom-colour set is used to colour that group's bones. Currently, this is non-functional, as the necessary drawing code for armatures is not in place yet.
Now, you can assign Action Channels to named (folder-like) groups, which help to organise the channels (important for more complex rigs). These are collapsible, can be "protected", and show a "summary" of the keyframes in the channels the Group contains. They are drawn as bright-green (active) or a darker shade of green (not active) channels.
* Each Action has its own set of Groups.
* An Action-Channel can only occur in one Group at a time. It can also not occur in any group.
* Action-Channels can be moved between Groups
* Groups + grouped-channels always occur BEFORE un-grouped channels
Important Hotkeys:
* Shift-G : Adds the selected Action-Channels to the Active Group. This will create a new group if need be
* Ctrl-Shift-G : Always adds a new group, and adds the selected Action-Channels to it
* Alt-G : Removes selected Action-Channels from their groups
* Ctrl-Shift-Alt-G : (Note: this will be removed soon) This is a simple debugging-hotkey I added, which just prints a list of the groups, channels, and their addresses...
* NKey / Ctrl-LMB: While hovering over the name of a group, this shows a popup like for other channels, which allows the editing of the channel's name, etc.
Assorted Notes:
* Some tools may not work yet with this (Ctrl Numpad+/- for example)
* Fixed some bugs in various places in Action Editor code
* Added theme colours for group channels
* The nomenclature of these tools may change in future when a better alternative is found
* The ability to auto-assign action-channels to groups when they are keyframed will be coming up shortly
- Keyed particles work again for all visualizations (previously only "path"), they still need some work though to be fully operational.
- Keyed particles weren't saved or loaded correctly.
Custom Orientations can be added with Ctrl-Shift-C (hotkey suggestions are welcomed), this adds and select the new alignment. Custom Orientations can also be added, deleted, selected from the Transform Orientations panel (View -> Transform Orientations). Standard orientations (global, local, normal, view) can also be selected from this panel.
If you plan on using only a single custom orientation and don't really need a list, I suggest you use the hotkey as it adds and selects at the same time.
Custom Orientations are save in the scene and are selected per 3D view (like normal orientation).
Adding from an object, the orientation is a normalized version of the object's orientation.
Adding from mesh data, a single element (vertex, edge, face) must be selected in its respective selection mode. Vertex orientation Z-axis is based on the normal, edge Z-axis on the edge itself (X-axis is on the XoY plane when possible, Y-axis is perpendicular to the rest). Face orientation Z-axis is the face normal, X-axis is perpendicular to the first edge, Y-axis is perpendicular to the rest.
(More logical orientations can be suggested).
I plan to add: 2 vertice (connected or not) => edge orientation , 3 vertice = face orientation
Differences from the patch:
- orientations no longer link back to the object they came from, everything is copy on creation.
- orientations are overwritten based on name (if you add an orientation with the same name as one that already exists, it overwrites the old one)
Based on feedback from Ton, I've recoded the way "PoseLibs" are implemented/exposed. Therefore, quite a bit of code has been changed to fit this in better.
Now, ANY ACTION can be a "PoseLib". A set of Markers which belong to the Action (it's taken a year, but they're finally back), are used to tag "poses" in the Action. These markers are shown using diamond-shaped blue icons (designed by Matt Ebb) in three shades - unselected/normal, selected, active.
Notes:
* Each Armature Object has an Action which acts as a PoseLib.
* Improved UI presented in buttons panel for this
-- added proper buttons for action assigning
-- renamed "Validate PoseLib" to "Auto-Sync PoseLib" (this option auto-tags poses based on keyframes found)
Like in the 3d-view, use the hotkeys:
* Shift-L to add a local marker
* Ctrl-Shift-L to rename a local marker
* Alt-L to delete selected local markers
Note: transforms, etc. are not currently available with these markers
== PoseLib Preview ==
Added a few features here:
* Left/Right-Arrow keys now change the poses too (previous and next respectively)
* Up/Down-Arrow keys also change the poses, but "jump" to a pose 5 steps away in their respective directions
"A slightly late Christmas present for the Animators out there :-)"
This tool allows animators to store frequently used poses in an action, and be able to label those poses to help them retrieve them later. In a way, it acts as a glorified clipboard for poses.
One of the cool features with this is the ability to select which stored pose to use interactively in the 3d-view. Once a few poses have been stored in the PoseLib, simply use the "Ctrl L" hotkey to start previewing. Use the Mousewheel or the Page Up/Down keys to change poses, and confirm/cancel the preview in the same way as you do for transforms.
Usage Notes:
* Each Armature may get its own PoseLib. PoseLibs are simply actions with extra data, so they can get relinked.
* Manually editing actions used as PoseLibs is not a good idea, as some data may not be able to be found. Tools to automagically find poses in an action could be investigated...
* PoseLib will only apply/retrieve poses to/from selected bones
* A basic UI for this can be found in the "Links and Materials" panel. Most of the PoseLib tools are presented there.
Useful Hotkeys (also found in Pose->PoseLib menu):
* Ctrl L - interactively preview poses
* Shift L - add a new pose or replace an existing pose in the PoseLib with the current pose
* Ctrl Shift L - rename an existing pose in the PoseLib
* Alt L - remove a pose from the poselib.c
Reworked image / movie loading, to add the following features:
- Mute strip
- Lock strip (peach request :)
- Crop / Translate _before_ image rescaling
- N-keys editing of start, startofs, endofs, startstill, endstill
Added (currently disabled) data structures for
- proxy support
- strip blend modes (currently only "REPLACE" works, which always did :)
Planed:
- automatic FPS rescaling
- command keys to lock/mute a bunch of selected strips
(which would complete the peach request to lock tracks)
Caveats: now the N-keys dialog is four-tabbed. I think, we should move those
tabs into the panels dialog in the future...
Applying Stephan Kassemeyer's patch (#6750) to add a curve modifier for sculpting.
A few changes from the patch:
* The default curve is closer to the old behavior
* Fixed loading files already saved in sculpt mode
* Changed the interface; split the brush texture controls off into a third sculpt tab, and put the curve (and curve reset) into the Brush tab.
=========
Merge of the famous particle patch by Janne Karhu, a full rewrite
of the Blender particle system. This includes:
- Emitter, Hair and Reactor particle types.
- Newtonian, Keyed and Boids physics.
- Various particle visualisation and rendering types.
- Vertex group and texture control for various properties.
- Interpolated child particles from parents.
- Hair editing with combing, growing, cutting, .. .
- Explode modifier.
- Harmonic, Magnetic fields, and multiple falloff types.
.. and lots of other things, some more info is here:
http://wiki.blender.org/index.php/BlenderDev/Particles_Rewritehttp://wiki.blender.org/index.php/BlenderDev/Particles_Rewrite_Doc
The new particle system cannot be backwards compatible. Old particle
systems are being converted to the new system, but will require
tweaking to get them looking the same as before.
Point Cache
===========
The new system to replace manual baking, based on automatic caching
on disk. This is currently used by softbodies and the particle system.
See the Cache API section on:
http://wiki.blender.org/index.php/BlenderDev/PhysicsSprint
Documentation
=============
These new features still need good docs for the release logs, help
for this is appreciated.
====================
Dynamic binding support. This means that the mesh can move _within_
the cage and still deform correct. If the mesh goes out of the cage,
don't expect correct result. Must be enabled with the 'Dynamic'
option, because it is slower and consumes more memory.
This is useful to use e.g. the cage mesh for main deformations and
still have shape keys for facial deformation working.
====================
The MeshDeform modifier can deform a mesh with another 'cage' mesh.
It is similar to a lattice modifier, but instead of being restricted
to the regular grid layout of a lattice, the cage mesh can be modeled
to fit the mesh better.
http://www.blender.org/development/current-projects/changes-since-244/modifiers/
Implementation Notes:
- OpenNL has been refactored a bit to allow least squares matrices to
be built without passing the matrix row by row, but instead with
random access. MDef doesn't need this actually, but it's using this
version of OpenNL so I'm just committing it now.
- Mean value weights for polygons have been added to arithb.c, a type
of barycentric coordinates for polygons with >= 3 vertices. This
might be useful for other parts of blender too.
Once again, I've recoded the constraints system. This time, the goals were:
* To make it more future-proof by 'modernising' the coding style. The long functions filled with switch statements, have given way to function-pointers with smaller functions for specific purposes.
* To make it support constraints which use multiple targets more readily that it did. In the past, it was assumed that constraints could only have at most one target.
As a result, a lot of code has been shuffled around, and modified. Also, the subversion number has been bumped up.
Known issues:
* PyConstraints, which were the main motivation for supporting multiple-targets, are currently broken. There are some bimport() error that keeps causing problems. I've also temporarily removed the doDriver support, although it may return in another form soon.
* Constraints BPy-API is currently has a few features which currently don't work yet
* Outliner currently only displays the names of the constraints instead of the fancy subtarget/target/constraint-name display it used to do. What gets displayed here needs further investigation, as the old way was certainly not that great (and is not compatible with the new system too)
Initial commit of imagebrowser in trunk.
BIG COMMIT!
Main changes:
* completely reworked imasel space
* creation and storage of the preview images for materials, textures, world and lamp
* thumbnails of images and movie files when browsing in the file system
* loading previews from external .blend when linking or appending
* thumbnail caching according to the Thumbnail Managing Standard: http://jens.triq.net/thumbnail-spec/
* for now just kept imasel access mostly as old imgbrowser (CTRL+F4, CTRL+F1) a bit hidden still.
* filtering of file types (images, movies, .blend, py,...)
* preliminary managing of bookmarks ('B' button to add, XKEY while bookmark active to delete)
More detailed info which will be updated here: http://wiki.blender.org/index.php/User:Elubie/PreviewImageBrowser
Places that need special review (and probably fixes):
* BLO_blendhandle_get_previews in readblenentry
* readfile.c: do_version and refactorings of do_library_append
* UI integration
TODO and known issues still:
* Accented characters do not display correctly with international fonts
* Crash was reported when browsing in directory with movie files
* Bookmark management still needs some UI work (second scrollbar?), feedback here is welcome!
Credits:
Samir Bharadwaj (samirbharadwaj@yahoo.com) for the icon images.
Many thanks to everyone who gave feedback and helped so far!
This commit fixes the Draw module. All buttons/widgets created via the Draw
module in a SpaceScript area are now inserted into a global list attached to
the SpaceScript data. This list is cleared before each draw, when freeing
the space, and when the area is switched to another space.c
This is necessary to prevent Blender's internal UI code from getting invalid
pointers to python data. In addition, it allows storing widget tooltips
inside the python Button objects, which solves that little bit of stupidity.
Note that this reverts the previous weaklist solution. In fact, I had to go
over each previous commit by Campbell after this code originally branched
before the weaklist commit and re-add each commit. So if anything is
missing, just tell me, or feel free to re-add it.
This commit adds a new constraint to Blender: the Transformation Constraint. This constraint gives you more freedom to choose how transforms are copied from one object/bone to another object/bone.
You can assign the Loc/Rot/Scale channels of a source to the Loc/Rot/Scale channels of a destination, specifying the range of motion (per axis) from the source to consider, and the range of motion (per axis) that will be applied to the destination. Also, for each destination axis, you can choose which of the source axes to copy from.
A similar constraint was coded by Jason Blary (snark), as Patch #4991. This constraint is basically rewritten from scratch, although there are some elements of the original patch which may be borrowed in future.
Various notes:
* PyAPI access has been coded.
* Space conversion is also enabled for this constraint.
* Also the useless get_constraint_col function has been removed
* Doing a rotation copy with a ratio that is not 1:1 doesn't always work correctly yet (like for the Copy Rotation constraint).
After just over a week of coding, I've finished doing a major refactor/cleanup of the constraints code. In the process, quite a few old kludges and ugly hacks have been removed. Also, some new features which will greatly benefit riggers have been implemented.
=== What's New ===
* The long-awaited ``ChildOf Constraint'':
This allows you to animate parent influences, and choose which transformation channels the parent affects the child on (i.e. no translation/rotation/scaling). It should be noted that disabling some combinations may not totally work as expected. Also, the 'Set Inverse' and 'Clear Inverse' buttons at the bottom of this constraint's panel set/clear the inverse correction for the parent's effects. Use these to make the owner not stick/be glued to the parent.
* Constraint/Target Evaluation Spaces:
In some constraints, there are now 1-2 combo boxes at the bottom of their panel, which allows you to pick which `co-ordinate space' they are evaluated in. This is much more flexible than the old 'local' options for bones only were.
* Action Constraint - Loc/Rot/Size Inputs
The Action Constraint can finally use the target's location/rotation/scaling transforms as input, to control the owner of the constraint. This should work much more reliably than it used to. The target evaluation should now also be more accurate due to the new space conversion stuff.
* Transform - No longer in Crazy Space (TM)
Transforming objects/bones with constraints applied should no longer occur in Crazy Space. They are now correctly inverse-corrected. This also applies to old-style object tracking.
=== General Code Changes ===
* solve_constraints is now in constraints.c. I've removed the old `blend consecutive constraints of same type' junk, which made the code more complex than it needed to be.
* evaluate_constraint is now only passed the constraint, and two matrices. A few unused variables have been removed from here.
* A tempolary struct, bConstraintOb, is now passed to solve_constraints instead of relying on an ugly, static workobject in some cases. This works much better.
* Made the formatting of constraint code consistent
* There's a version patch for older files so that constraint settings are correctly converted to the new system. This is currently done for MajorVersion <= 244, and SubVersion < 3. I've bumped up the subversion to 3 for this purpose. However, with the imminent 2.45 release, this may need to be adjusted accordingly.
* LocEulSizeToMat4 and LocQuatSizeToMat4 now work in the order Size, Rot, Location. I've also added a few other math functions.
* Mat4BlendMat4 is now in arithb. I've modified it's method slightly, to use other arithb functions, instead of its crazy blending scheme.
* Moved some of the RigidBodyJoint constraint's code out of blenkernel, and into src. It shouldn't be setting its target in its data initialisation function based + accessing scene stuff where it was doing so.
=== Future Work ===
* Geometry to act as targets for constraints. A space has been reserved for this already.
* Tidy up UI buttons of constraints
This commit should fix some seemingly random crashes broken and I have been experiencing while editing armatures.
A backtrace revealed that autosave was choking on the PoseChannels that didn't have a Bone assigned to them. This was caused by the bone duplication code making a new PoseChannel for a duplicated bone, but that new bone not getting assigned to the PoseChannel yet, as the user was still in EditMode.
At last! The ability to code constraints in Python. This opens up many interesting rigging possibilities, as well as making prototyping constraints easier.
* A PyConstraint script must begin with the line
#BPYCONSTRAINT
* It must also define a doConstraint function, which performs the core actions of the constraint.
* PyConstraints use IDProperties to store custom properties for each PyConstraint instance. The scripter can choose which of these ID-Properties to expose to a user to control the behaviour of the constraint. This must be done using the Draw.PupBlock method.
Credits to Joe Eager (joeedh) for coding the original patch on which this is based. I've made heavy revisions to large parts of the patch.
For more detailed information, and some demo scripts, see the following page:
http://aligorith.googlepages.com/pyconstraints2
* Moved the multires vertex data from struct MultiresLevel to struct Multires. There's no longer any reason to store data seperately for each level; it was just taking up extra memory.
* Incremented the subversion to 2 and adjusted do_versions to correctly load older files.
* Refactored the multires update process (which handles propagating changes to other levels)
This (new) constraint limits the location of an object/bone to the range of locations
on a given curve. It works by comparing the location of the owner on one axis, to
the extents of the curve's bounding-box on the same axis, to find the location on
the curve.
Usage Notes:
* 'Ob:' field must point to a valid curve object
* This curve should have 'Path' turned on in order for this constraint to work. You
don't really need to do this as it will be taken care of by the code.
* 'Auto' toggle automically determines which axis should be used for the distance estimations/calculations. It is the default option, but may not work that well for
some cases.
* X/Y/Z toggles can be used to select the axis to use for these calculations. Try
to choose the axis along which the curve stretches out for most.
Python Notes:
Python API access for this constraint is not included in this commit. Will be coming
soon.
- New Softbody panel now is named "Soft Body Collision" (instead of II)
Also made it start tabbed, and made Fluids panel start untabbed.
- Infowindow: skip drawing buttons when width is smaller than 320 pixels.
