BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
Group membership testing for including/excluding feature lines was not
accounting for object names possibly further qualified by library file
paths.
Also fixed a few potential (but unlikely) references of uninitialized
variables.
A big thank to Bastien Montagne for the insight on the cause of the
problem and how to fix it.
The addressed issue is a regression from Blender 2.75, after the internal
switch from double to single precision floating-point numbers in the
Freestyle code base. Face normal calculations require the higher
precision during the computations, even though the results can be stored
as single precision numbers.
Several class member variables were removed (at the cost of computing their values
when retrieved) or changed to a type of smaller size. Also fixed whitespace.
A crash in the Freestyle renderer was reported by Ton on IRC with a stack trace
below. Note that #2 is in Freestyle, whereas #1 is in the compositor. The problem
was observed in a debug build on OS X 10.7 (gcc 4.2, openmp disabled, no llvm).
----------------------------------------------------------------------
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: 13 at address: 0x0000000000000000
[Switching to process 72386 thread 0xf303]
0x0000000100c129f3 in NodeBase::~NodeBase (this=0x10e501c80) at COM_NodeBase.cpp:43
43 delete (this->m_outputsockets.back());
Current language: auto; currently c++
(gdb) where
#0 0x0000000100c129f3 in NodeBase::~NodeBase (this=0x10e501c80) at COM_NodeBase.cpp:43
#1 0x0000000100c29066 in Node::~Node (this=0x10e501c80) at COM_Node.h:49
#2 0x000000010089c273 in NodeShape::~NodeShape (this=0x10e501c80) at NodeShape.cpp:43
#3 0x000000010089910b in NodeGroup::destroy (this=0x10e501da0) at NodeGroup.cpp:61
#4 0x00000001008990cd in NodeGroup::destroy (this=0x10e5014b0) at NodeGroup.cpp:59
#5 0x00000001008990cd in NodeGroup::destroy (this=0x114e18da0) at NodeGroup.cpp:59
#6 0x00000001007e6602 in Controller::ClearRootNode (this=0x114e19640) at Controller.cpp:329
#7 0x00000001007ea52e in Controller::LoadMesh (this=0x114e19640, re=0x10aba4638, srl=0x1140f5258) at Controller.cpp:302
#8 0x00000001008030ad in prepare (re=0x10aba4638, srl=0x1140f5258) at FRS_freestyle.cpp:302
#9 0x000000010080457a in FRS_do_stroke_rendering (re=0x10aba4638, srl=0x1140f5258) at FRS_freestyle.cpp:600
#10 0x00000001006aeb9d in add_freestyle (re=0x10aba4638) at pipeline.c:1584
#11 0x00000001006aceb7 in do_render_3d (re=0x10aba4638) at pipeline.c:1094
#12 0x00000001006ae061 in do_render_fields_blur_3d (re=0x10aba4638) at pipeline.c:1367
#13 0x00000001006afa16 in do_render_composite_fields_blur_3d (re=0x10aba4638) at pipeline.c:1815
#14 0x00000001006b04e4 in do_render_all_options (re=0x10aba4638) at pipeline.c:2021
----------------------------------------------------------------------
Apparently a name conflict between the two Blender modules is taking place.
The present commit hence intends to address it by putting all the Freestyle C++
classes in the namespace 'Freestyle'. This revision will also prevent potential
name conflicts with other Blender modules in the future.
Special thanks to Lukas Toenne for the help with C++ namespace.
New "face marks" and "edge marks" have been introduced in mesh data
blocks. In the edit mode of a mesh object, face marks can be put
to selected faces by choosing Mesh >> Faces >> Mark Freestyle Face
from the menu of a 3D View window or Ctrl-F >> Mark Freestyle Face
from the context menu. Similarly, edge marks can be put to selected
edges by Mesh >> Edges >> Mark Freestyle Edge or Ctrl-E >> Mark
Freestyle Edge. These marks should work fine with the Subdivision
surface modifier.
Moreover, two new conditions for feature edge selection have been
added to the Parameter Editor mode as described below:
1. The Selection by Edge Types option has now the new Edge Mark type,
which can be used to (de)select feature edges having edge marks.
This option can be used to add to (or remove from) the view map
arbitrary edges of mesh objects.
2. Selection by Face Marks option has been newly introduced, in which
face marks are used for feature edge selection in two ways. One
option is called "One Face" which is to (de)select feature edges if
one of faces on the left and right of each feature edge has a face
mark. The other option is "Both Faces" to (de)select feature edges
if both faces on the left and right have a face mark.
* View map calculation has been intensively optimized for speed by
means of:
1) new spatial grid data structures (SphericalGrid for perspective
cameras and BoxGrid for orthographic cameras; automatically switched
based on the camera type);
2) a heuristic grid density calculation algorithm; and
3) new line visibility computation algorithms: A "traditional"
algorithm for emulating old visibility algorithms, and a "cumulative"
algorithm for improved, more consistent line visibility, both exploiting
the new spatial grid data structures for fast ray casting.
A new option "Raycasting Algorithm" was added to allow users to choose
a ray casting (line visibility) algorithm. Available choices are:
- Normal Ray Casting
- Fast Ray Casting
- Very Fast Ray Casting
- Culled Traditional Visibility Detection
- Unculled Traditional Visibility Detection
- Culled Cumulative Visibility Detection
- Unculled Cumulative Visibility Detection
The first three algorithms are those available in the original
Freestyle (the "normal" ray casting was used unconditionally, though).
The "fast" and "very fast" ray casting algorithms achieve a faster
calculation at the cost of less visibility accuracy.
The last four are newly introduced optimized options. The culled
versions of the new algorithms will exclude from visibility
calculation those faces that lay outside the camera, which leads to a
faster view map construction. The unculled counterparts will take all
faces into account. The unculled visibility algorithms are useful
when culling affects stroke chaining.
The recommended options for users are the culled/unculled cumulative
visibility algorithms. These options are meant to replace the old
algorithms in the future.
Performance improvements over the old algorithms depend on the scenes
to be rendered.
* Silhouette detection has also been considerably optimized for speed.
Performance gains by this optimization do not depend on scenes.
* Improper handling of error conditions in the view map construction
was fixed.
ViewShape objects in the view map, as well as SShape objects
that can be retrieved with ViewShape::sshape(), now have a
getName() method that returns the name of the object from
which each shape is created. For instance, visible feature
edges of specific mesh objects (e.g., Cube.001 and Cube.002)
can be selected using custom predicate ObjectNamesUP1D as
follows:
class ObjectNamesUP1D(UnaryPredicate1D):
def __init__(self, names):
UnaryPredicate1D.__init__(self)
self._names = names
def getName(self):
return "ObjectNamesUP1D"
def __call__(self, viewEdge):
return viewEdge.viewShape().getName() in self._names
upred = AndUP1D(QuantitativeInvisibilityUP1D(0),
ObjectNamesUP1D(["Cube.001", "Cube.002"]))
Operators.select(upred)
All of the reference to the original Material class were renamed to FrsMaterial to resolve a name collision with Blender. To keep the window context necessary to draw the strokes after RE_Database_FromScene has been called, the display_clear function is used.
IMPORTANT: The setters functions' names were normalized due to constant confusion regarding capitalization. All the function names start with set... instead of Set.... This convention was changed all throughout Freestyle. To use Freestyle as an external renderer, the SWIG library MUST be regenerated.
From now on, when a set should be output (PySet_Type), it is given as a list (PyList_Type). The reason is that it doesn't really matter what we bring back to the Python interpreter. The set is guaranteed in memory on the C++ side.
For the CurvePoint class, the userdata variable is not yet ported (and will probably available as a list or a dictionary). The CurvePoint implementation works except for the initialization from other CurvePoints: somehow, the inner variables don't seem to be correctly handled. I do not know if it is a bug in Freestyle or if the CurvePoint object's state is correct for my test case. CurvePoint needs more testing.
