This adds a new operator: bpy.ops.mesh.flip_quad_tessellation()
This operator rotates the internal loops of the selected quads, allowing
the user to control tessellation without destructively altering the
mesh.
{F14201995}
This operator can be found in the "Face" menu (Ctrl+F) under "Face
Data".
{F14201997}
Reviewed By: campbellbarton, dbystedt
Differential Revision: https://developer.blender.org/D17056
This is very similar to D14077. There are two differences though.
First is that vertex creases are already stored in a separate layer,
and second is that we can now completely remove use of `Mesh.cd_flag`,
since that information is now inherent to whether the layers exist.
There are two functional differences here:
* Operators are used to add and remove layers instead of a property.
* The "crease" attribute can be created and removed by geometry nodes.
The second change should make various geometry nodes slightly faster,
since the "crease" attribute was always processed before. Creases are
now interpolated generically in the CustomData API too, which should
help maintain the values across edits better.
Meshes get an `edge_creases` RNA property like the existing vertex
property, to provide more efficient access to the data in Cycles.
One test failure is expected, where different rounding between float
the old char storage means that 5 additional points are scattered in
a geometry nodes test.
Differential Revision: https://developer.blender.org/D15927
As described in T95966, the goal is to move to a "struct of arrays"
approach rather than gathering an arbitrary set of data in hard-coded
structs. This has performance benefits, but also code complexity
benefits (this patch removes plenty of code, though the boilerplate
for the new operators outweighs that here).
To mirror the internal change, the options for storing mesh bevel
weights are converted into operators that add or remove the layer,
like for some other layers.
The most complex change is to the solidify modifier, where bevel
weights had special handling. Other than that, most changes are
removing clearing of the weights, boilerplate for the add/remove
operators, and removing the manual transfer of bevel weights
in bmesh - mesh conversion.
Eventually bevel weights can become a fully generic attribute,
but for now this patch aims to avoid most functional changes.
Bevel weights are still written and read from the mesh in the old way,
so neither forward nor backward compatibility are affected. As described
in T95965, writing in the old format will be done until 4.0.
Differential Revision: https://developer.blender.org/D14077
The "Color Attributes" system from f7bbc7cdbb has replaced
both "Sculpt Vertex Colors" and "Vertex Colors" in the UI. The Operators
for adding and removing them are unused now.
This commit does not break backwards compatibility with the Python
API, it only removes the operators, which generally aren't used by
addons anyway. The mesh RNA properties will be removed in 4.0 (T100153).
Differential Revision: https://developer.blender.org/D15077
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
No operator or macro should be missing description. But if they do, then
they should use NULL pointer, and not an empty string.
This behavior was already enforced (through an assert) for operators,
previous commit made it the same for macros.
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
This implements a Face Set Extract operator, which is similar to mask
extract. This operator uses a picker to select and Face Set in the mesh
and extract the geometry directly to a new object.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8599
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
Basically this new tool constitutes a macro that uses the parameters of
the Extrude and Translate operators that were recently implemented.
Thanks to @CandleComet for initial implementation.
Differential Revision: https://developer.blender.org/D7222
This operator is similar to Mask Extract, but it deletes the masked points on the original mesh and fills the holes. This can be useful for quickly trimming or splitting an object.
This is not meant to be the main trimming tool of sculpt mode. I plan to have a set of trimming tools based on geometry booleans (trim box, lasso, line, bisect...) but in some cases doing a mask selection is more convenient.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6160
This operator extracts the paint mask to a new mesh object. It can extract the paint mask creating a boundary loop in the geometry, making it ready for adding a subdivision surface modifier.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5384
This commit changes the functionality of the Poly build tool to make it more suitable for retopology tasks:
- Click and drag from a boundary edge extrudes a new quad
- Click and drag on vertices tweaks the position
- Ctrl + click adds geometry. There is a geometry preview in the gizmo. It also can automatically convert triangles to quads.
- Shift + click deletes mesh elements (faces or vertices)
- Updated preselection code. Different mesh elements take priority depending on the selected action.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D5573
- Add missing tooltips to Quick Effects and Subdivide Edge Ring
- Add proper tooltip to the Bevel operator
- Clearer tooltips for the extrude operators
Plus a few other tweaks
Suggested by users on Devtalk.
- Move connected & projected into individual toggles.
- Top-level proportional editing button now only toggles.
- Use popover for proportional edit-mode falloff and options.
Note that it's no longer possible to toggle connected via key bindings,
although this could be supported again if it's needed.
Resolves T58081
Also added keys for toggling harden normals,
and cycling through miter types.
Still to do: add some shortcuts for affecting the
spread value for arc miters.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
This should be purely an implementation change,
for end users there should be no functional difference.
The entire key configuration is in one file with ~5000 lines of code.
Mostly avoiding code duplication and preserve comments and utility
functions from the C code.
It's a bit long but for searching and editing it's also convenient to
have it all in one file.
Notes:
- Actual keymap is shared by blender / blender_legacy
and stored in `keymap_data/blender_default.py`
This only generates JSON-like data to be passed into
`keyconfig_import_from_data`, allowing other presets to load and
manipulate the default keymap.
- Each preset defines 'keyconfig_data'
which can be shared between presets.
- Some of the utility functions for generating keymap items still
need to be ported over to Python.
- Some keymap items can be made into loops (marked as TODO).
See: D3907
- Poly build now uses a new gizmo for pre-selection
which has the same behavior as loop-cut.
This replaces hack where mouse-move set the active element
which was no longer working properly because of missing
depsgraph updates.
- Multi-object support for poly-build.
- Support for deformed cage.
- Fix error where changing active object wasn't properly
refreshing the preselect gizmo (for loopcut too).
Currently holding Alt to select non-boundary element's isn't working.
Add tool options to control how select operates (add/sub/set/and/xor).
Note: edit mode armature select still needs to support all options,
this is complicated by how it handles partial end-point selection.
