Following operators now only report messages back when they are called via their invoke-methods:
- ANIM_OT_keyframe_insert
- ANIM_OT_keyframe_insert_by_name
- ANIM_OT_keyframe_insert_menu
- ANIM_OT_keyframe_delete
- ANIM_OT_keyframe_clear_v3d
- ANIM_OT_keyframe_delete_v3d
Also removed the attribute confirm_success from the following operators:
- ANIM_OT_keyframe_insert
- ANIM_OT_keyframe_insert_by_name
- ANIM_OT_keyframe_insert_menu
- ANIM_OT_keyframe_delete
- ANIM_OT_keyframe_delete_by_name
Note: addons/scripts possibly need to be updated if they use the above operators AND set the "confirm_success" attribute
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12697
The issues:
1.) When we want to remove keyframes from a range of frames in an
action,
then we can use bpy.ops.anim.keyframe_delete_v3d to remove the keys
frame by frame. However, whenever the operator hits a frame with no
keyframes, then it generates an error. While when it hits a frame
with keyframes, then it reports the numbner of removed keys.
This creates a lot of unnecessary noise in the Blender console.
2.) Furthermore a related issue is that WM_event_add_notifier() is
called also when no frames where removed. This seems to significantly
slow down the removal of keyframes in a range of frames at least
when i use vscode for debugging.
A proposal for improvement:
This patch adds an attribute 'confirm_success' which controls
if the operator reports back what it did (or did not) while
executing. Silent mode would then be called like this:
bpy.ops.anim.keyframe_delete_v3d(confirm_success=False)
Note: confirm_success is True by default so this patchj does not
change the behavior of Blender, it only gives the option to scripts.
3.) Personal note:
I have chosen the attribute name to be equal as it is used
in other related operators. However i rather would rename the
attribute to "verbose" (preferred) or "with_confirm". But i let this
to be decided by the reviewers. Thanks for your time to review!
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12629
Support extracting identifiers RNA paths into fixed size buffer
since the maximum size of the identifier is known all cases.
- Add BLI_str_unescape_ex to support limiting the destination buffer.
- Add BLI_str_quoted_substr to copy values into a fixed size buffer.
Partially revert 7fc220517f, as it
introduced two issues:
- Deleting keys without active keying set was no longer possible, and
- there was no more confirmation popup.
Pressing {key Alt I} in the 3D Viewport now executes
`ANIM_OT_keyframe_delete_v3d`, adjusted to suit both T88068 and T89592:
- If there is an active keying set, delete keys according to that keying
set.
- Otherwise, behave as `ANIM_OT_keyframe_delete_v3d` did before, that
is, delete all keyframes of the selected object and in pose-mode also
of selected bones.
Remove duplicate code from the `ANIM_OT_keyframe_delete` operator. The
actions of the removed code are already performed by the preceding
`keyingset_get_from_op_with_error()` call.
No functional changes.
Remove the `BONE_UNKEYED` flag. It was only written (set/cleared) but
never actually read.
Also remove `framechange_poses_clear_unkeyed()` as its only function was
to clear the `BONE_UNKEYED` flag. It wasn't used anywhere either.
The only code that used the flag was the `extract_pose_from_action()`,
which was removed in 2869ce6cfa (2009).
No functional changes.
No intended functional changes.
Refactors animsys_evaluate_nla() into 2 versions:
animsys_evaluate_nla_for_keyframing(), animsys_evaluate_nla_for_flush()
to make it clear what data is being calculated and why.
Dummy strip creation has been refactored to two separate functions,
animsys_create_tweak_strip() and animsys_create_action_track_strip().
Both are evaluated differently from other strips and eachother. There's
no need to interweave them. A future patch D8296, generally requires
both strips.
___
XXX anim_sys.c) nlatrack_find_tweaked() is a temporary work around.
If anyone has any insight into this problem, help is appreciated.
Reviewed by: sybren
Differential Revision: http://developer.blender.org/D9696
This was returning an empty allocated string, however almost
all callers checked if the return value was NULL before freeing,
making for misunderstandings on the intended use of this function.
BCAnimationSampler::initialize_curves for example detected the
f-curves animation type to 'bone' based on a non-NULL return value
which never failed.
Also fixes two leaks where the the result of BLI_str_quoted_substrN
wasn't freed.
- BKE_bezt_subdivide_handles -> BKE_fcurve_bezt_subdivide_handles
- binarysearch_bezt_index -> BKE_fcurve_bezt_binarysearch_index
These functions are specific to F-Curves and don't make sense for other
uses of BezTriple (curve-object data for e.g.)
Also:
- Move detailed doxygen comment above code, following code-style.
- Mark bezt_add_to_cfra_elem unused.
Check selection state in `BKE_fcurve_active_keyframe_index()`, and only
return the active keyframe index when that keyframe is actually selected.
This is now also asserted in the `BKE_fcurve_active_keyframe_set()` function,
which is now also used when inserting a keyframe.
Previously Blender would only match the existing curve slope when the
to-be-inserted key value was already very close to the curve. This check
is now removed, allowing for sliders in the graph editor to subtly
change the curve, and for keyframes added with ctrl+click to follow the
curve better.
In the graph editor there is a panel that says "Active Keyframe" for
numerically editing a keyframe's values, but in the code there is no
concept of the "active keyframe." Since this is a useful concept to
have for some other features anyway, this commit adds an active
keyframe index value to FCurves. It also displays it with a theme
color for the active vertex (which didn't exist before) if the
FCurve is active.
The active keyframe in the graph editor is treated similarly to the
active vertex in the 3D view. It is the keyframe most recently selected
with a single click, and it is always selected.
For now, the only real functional change is that the active keyframe
appears in white and it should be more predictable which keyframe is
being edited in the sidebar panel.
Differential Revision: https://developer.blender.org/D7737
Apply the De Casteljau algorithm to split the Bèzier curve at the X
coordinate where the new key is inserted, and uses the result to update
both the newly inserted and surrounding handles.
For curves that use Auto keyframes this has been largely addressed by
the new algorithm from D2884. This commit extends this to non-auto
handles.
This code is heavily based on D3172 by Alexander Gavrilov (@angavrilov).
Manifest Task: https://developer.blender.org/T81353
Actions are either locked to a specific ID type, or "floating". Actions
in the floating state are now locked when they are assigned to an ID block.
Previously (rB94b99b5d4a7c20cf2) this was done at evaluation time, which
caused various problems:
- The ID type was set on the evaluated copy, and inconsistently flushed
back to the original.
- A newly created Action could not be assigned to an Action constraint,
unless a depsgraph evaluation was be forced first.
This is now resolved by calling `BKE_animdata_set_action()` to set the
action (instead of direct assignment) where possible, and calling
`BKE_animdata_action_ensure_idroot()` otherwise.
Manifest Task: https://developer.blender.org/T80986
Add an option to only draw icons for operator_enum menus. This is used
for drawing inline icon buttons in the outliner context menu for
collection color tagging.
Part of T77408
Differential Revision: https://developer.blender.org/D8880
Caused by rBfffba2b6530.
In above commit, the buttons rnaindex [-1 for entire arrays like colors]
was not used anymore for the entire function body of
`ED_autokeyframe_property` (previously in `ui_but_anim_autokey`).
Replacing the index with 0 (in the array case) is indeed necessary for
`BKE_fcurve_find_by_rna_context_ui`, prior to rBfffba2b6530 this was
taken care of by using `ui_but_get_fcurve` instead [which did this
internally].
But using an index of 0 (instead of -1) for the entire function body of
`ED_autokeyframe_property` fails for the array part later, namely
`insert_keyframe` needs -1 here.
Now just replace the index for //finding the FCurve//, but use the
original for //inserting the keyframe//.
Could be backported to 2.83 LTS.
Reviewers: campbellbarton, sybren
Subscribers:
Custom driver functions need access to the dependency graph that is
triggering the evaluation of the driver. This patch passes the
dependency graph pointer through all the animation-related calls.
Instead of passing the evaluation time to functions, the code now passes
an `AnimationEvalContext` pointer:
```
typedef struct AnimationEvalContext {
struct Depsgraph *const depsgraph;
const float eval_time;
} AnimationEvalContext;
```
These structs are read-only, meaning that the code cannot change the
evaluation time. Note that the `depsgraph` pointer itself is const, but
it points to a non-const depsgraph.
FCurves and Drivers can be evaluated at a different time than the
current scene time, for example when evaluating NLA strips. This means
that, even though the current time is stored in the dependency graph, we
need an explicit evaluation time.
There are two functions that allow creation of `AnimationEvalContext`
objects:
- `BKE_animsys_eval_context_construct(Depsgraph *depsgraph, float
eval_time)`, which creates a new context object from scratch, and
- `BKE_animsys_eval_context_construct_at(AnimationEvalContext
*anim_eval_context, float eval_time)`, which can be used to create a
`AnimationEvalContext` with the same depsgraph, but at a different
time. This makes it possible to later add fields without changing any
of the code that just want to change the eval time.
This also provides a fix for T75553, although it does require a change
to the custom driver function. The driver should call
`custom_function(depsgraph)`, and the function should use that depsgraph
instead of information from `bpy.context`.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D8047
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/animation` module.
No functional changes.
Functionality here has become confusing over time,
this removes duplicate, similar functions, preferring to set the mode
instead of toggle, enter, exit.
Mode switching utility function behaved differently regarding undo,
'ED_object_mode_toggle' for example didn't skip the undo push
where 'ED_object_mode_set' did.
Some callers chose these functions based on the intended undo behavior,
even when toggling didn't make sense.
There was also ED_object_mode_generic_enter which was similar to
ED_object_mode_set, instead of the reverse of ED_object_mode_generic_exit.
Simplify object mode switching internals:
- Replace ED_object_mode_generic_enter with ED_object_mode_set.
- Remove ED_object_mode_toggle as nearly all callers needed to check
the current mode so toggling would set the mode argument correctly.
- Use ED_object_mode_set for the object mode switching operator
to simplify logic.
- Add ED_object_mode_set_ex which has an argument to disable undo,
needed when loading undo data needs to set the mode.
- Remove unused ED_object_mode_exit.
All the driver-specific code in `fcurve.c` has been moved into a new file
`fcurve_driver.c`. The corresponding declarations have been moved from
`BKE_fcurve.h` to `BKE_fcurve_driver.h`.
All the `#include "BKE_fcurve.h"` statements have been investigated and
replaced with `BKE_fcurve_driver.h` where necessary.
No functional changes.
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
Mpving utils from idcode to idtype proved to be somewhat painful for
some reasons, but now all looks good.
Had to add a fake/empty shell for the special snowflake too,
`ID_LINK_PLACEHOLDER/INDEX_ID_NULL`...
There are two ways in which adding/deleting keyframes can fail, but only
one of those was handled. The other would be shown as a successful
add/delete of -2 keyframes.
The `ANIM_apply_keyingset()` returns a value that indicates the number of
changed channels (if nonnegative) or an error state (negative). In the
places where the return value was actually used, this value was stored in
a badly named variable.
- Use 'int' for counters instead of short.
- Use 'bool' instead of a counter when only a change is being detected.
- Use typed enum for keying set flags.
- Include in comments when a negate error code may be returned.
- Split 'verify_fcurve' into two functions:
ED_action_fcurve_ensure which adds the f-curve if needed.
ED_action_fcurve_find which returns NULL when not found.
Callers of ED_action_fcurve_find had unused 'group'
argument which has been removed.
- Rename verify_adt_action to ED_id_action_ensure
It had an argument to add data which was always true,
remove this instead of splitting in into a separate function.
