This is a kind of sloppy-focus,
resolving long standing bug with loop-cut/knife/ruler /w quad-view.
Where activating a tool would lock onto one of quad-views,
especially problematic when activating from the toolbar or menus.
Tried a couple of things to trigger an update/redraw for the exact right
moment (sending azone update event, timer, delayed redraw, etc) but this
seems to work rock solid without being *that* ugly.
In some cases the graphic card supports quadbuffer, but not the display.
In this case it is nice to go back to a window that does not have
quadbuffer if you change back to anaglyph, interlace, ...
Otherwise you may be stuck with a flickering window
I'll enable this mode in Release builds once I figure out how to best
handle opening files that are saved with the quadbuffer mode.
In fact I think no display mode should be saved/read from a file.
Tested in Linux with NVidia 3D Vision and NVidia 3D Vision Pro with
NVidia Quadro FX 580 and Quadro FX 4600.
(kudos for the Visgraf Lab at IMPA, for having me around with all those
gadgets ;)
Thanks for Cédric Paille (cedricp) for the code snippets and tests -
T44327
Flush edits only when saving global undo. This will stop freeing of PBVH
in sculpt mode, which introduces some pretty severe freezes, especially
in dyntopo. For global undo we flush the contents of the global undo
buffer which does not include localized edits of sculpt/edit mode, so
those data will not get saved anyway.
This was causing glitches when switching from/to fullscreen modes (e.g.,
side by side to anaglyph).
As for the quadbuffer errors this is part of a more complete solution to
be committed later.
Our current keymap doesn't give us enough room to make such changes in
the event system. To fix small issues caused by this, we would need to do
drastic changes in Blender's keymaps and internal handling. It was worth
a try, but it didn't work.
I can write down a more descriptive statement in a few days, but for now
I need a break of this stuff.
Speedup is non-linear, 2x-10x faster is quite normal.
Patch T43678.
- Switched from an Octree to BVH.
- Finding first points of surface no longer "wastes" density function evaluation: every result is cached.
- Use MemArena instead of using own memory management.
- Correct calculation of metaelem bounding box.
- Remove mball_count(): mballs are now counted "on the go".
* Revert 776bfa64a5 and c3dad7953a (some X11 systems are doing
stupid things forcing me to do an extra check that completely breaks the
click type handling on other systems using the slightly changed
implementation from those commits - see T44278)
* Fix sample lines in Compositor+VSE
(And yes, this time I tested on both of my systems to make sure
everything is fine)
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
Seems like a fix that is needed for some X11 systems causes this bug on
others :| Not sure if the systems that needed this fix are now still
fine (since I did a slight change to the click type check procedure),
but I need to check that on my system in the institute in a bit.
Just add KM_CLICK to the already sent KM_RELEASE, don't send a new one
for this.
This might help us to get rid of quite some glitches and workarounds \o/
(why didn't this come earlier to my mind? :S)
For KM_ANY I've filtered out every event that has a click type, although
that was only needed for the additional event sent on KM_HOLD. A bit weird
that this only happened on a few machines though.
Design task: T42339
Differential Revision: D840
Initial implementation proposal: T41867
Short description:
With this we can distinguish between holding and tabbing a key. Useful
is this if we want to assign to operators to a single shortcut. If two
operators are assigned to one shortcut, we call this a sticky key.
More info is accessible through the design task and the diff.
A few people that were involved with this:
* Sean Olson for stressing me with this burden ;) - It is his enthusiasm
that pushed me forward to get this done
* Campbell and Antony for the code and design review
* Ton for the design review
* All the other people that gave feedback on the patch and helped to
make this possible
A big "Thank You" for you all!
Added translation there, also fixed a stupid bug which was leading most internal
operators to have 'dual' i18n_context (default NULL one and default 'Operator' one).
OpenGL is detected:
Hoping to decrease the frequency of by far one of the most frequent bug
reports by windows users.
There is some reorganization of the GHOST API to allow easy addition of
further OpenGL options in the future. The change is not propagated too
deep to keep the size of the patch managable. We might reorganize things
here later.
For OpenGL we do two checks here:
One is a combination of GDI generic renderer or vendor microsoft
corporation and OpenGL version 1.1. This means the system does not
use GPU acceleration at all. We warn user to install a graphics
driver and of cases where this might happen (remote connection, using
blender through virtual machine)
The other one just checks if OpenGL version is less than 1.4 (we can
easily change that in the future of course) and warns that it is
deprecated.
Both cases will still let blender startup correctly but users should now
have a clear idea of the system being unsupported.
A user preference flag is provided to turn the warning off.
Now stop posting those bug reports without installing a driver first -
please?
patch number D706 with changes:
- WITH_GPU_DEBUG just creates a debug context (and enables the debug messaging
system functions) but leaves the checks we had intact. Old patch
added the debug functionality only if we had the flag on to save some
performance.
Rationale here is that we might not want to recompile blender just to get
the extra information, and having users start blender with a -d flag to
get the extra information is also useful for bug reports. Those checks already
existed and most expensive ones are hidden behind a debug mode check
so performance should not be that bad.
- Did some cleanup of existing functionality:
When things go wrong blender side, just print the error,
don't check for GL errors first.
- Did not port changes needed for GLES to regular glew.h
- Got rid of duplicate or very similar new functionality.
Generally, code is more moving things around/cleanup and should work exactly
as before apart from the debug context, so it's safe to add even now.
It also provides a nice substitute function for glu error descriptions
