Outliner display under 'Animation' > 'NLA Tracks' was not updating in
the following cases:
- adding strips
- removing strips
- duplicating strips (possibly to different track)
- swapping strips
- reordering tracks
- changing strip order by translating
- translating strips between tracks
- renaming tracks
In the case of deleting strips/tracks, this was also resulting in a use-
after-free error in Outliner drawing code (this was reported specifically
in T84586).
Most of these operators already sent a ND_NLA|NA_EDITED notifier, but the
Outliner is not listening to these. Listening to NA_EDITED is also not
what we want since this also happens a lot in cases irrelevant to the
Outliner. Now be a bit more specific and send ND_NLA|NA_ADDED / ND_NLA|
NA_REMOVED or a new ND_NLA_ORDER (to distinguish from NA_EDITED
'only' - where a redraw is not neccessary) and listen to these from the
Outliner.
(note: places that were listening to ND_NLA|NA_EDITED before are also
listening to NA_ADDED or NA_REMOVED, so changing NA_EDITED should not be
a problem here)
(note 2: for cases like swapping tracks/strips order, NA_ADDED or
NA_REMOVED does not make sense, neither can we use NA_EDITED [since we
dont want to listen to this], so in this case an additional ND_NLA_ORDER
is now sent)
(note 3: in nla transform code, this is now always sent on confirm. There
are cases were the notifier would not be needed, but checking exactly all
cases were it actually would be needed seems overkill [history of D10073
has example code to check if strips moved between tracks])
Maniphest Tasks: T84586
Differential Revision: https://developer.blender.org/D10073
The incremental snap was always operating in the local space, which in most
cases is the VIEW type orientation.
Use only local space when the operation is affected by constraint.
Differential Revision: https://developer.blender.org/D10052
The pointer allocated to the `TransData` was being incorrectly incremented,
causing misalignment and consequently `heap-buffer-overflow`.
Because of this, `TD_NOTCONNECTED` was being set in a strange way that did
not correspond to other types of `TransData`.
The solution is to not increment the `TransData` pointer and set
`TD_NOTCONNECTED` only for "unconnected" segments.
The code was also a bit deduplicated.
Since the `TransData` converted from vertices is the same used for other
transform modes (Move, Rotate, Resize), the logic used for mirroring
focused only on the position of the vertices.
The solution here is to create a specific `TansData` for `CD_MVERT_SKIN`.
The transform code did not provide a 2d context to be used in 3d space.
The solution is to set all matrices for the screen space in these cases.
This commit also removes the dial3d drawing in these cases.
It was not correct anyway.
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
ratio
Caused by rB4eda60c2d82d.
T83801 reported not moving in pixel space, but even without that toggle
above commit caused the translation to not take apsect ratio into
account properly [a translation of 1 on the x axis for example on an
image with non 1:1 aspect ration caused the UVs to not end up in the
same place on the next 'tile']
Above commit removed 'removeAspectRatio()' [the counterpart of
applyAspectRatio -- which does the pixel coord correction internally]
from 'applyTranslation()'.
This was also reported in T83352 [which was closed by rBf3b08af24c9f --
but that only solved the displax in header, not the actual
transformation]
Now bring back 'removeAspectRatio()'.
Maniphest Tasks: T83801
Differential Revision: https://developer.blender.org/D9869
This was returning an empty allocated string, however almost
all callers checked if the return value was NULL before freeing,
making for misunderstandings on the intended use of this function.
BCAnimationSampler::initialize_curves for example detected the
f-curves animation type to 'bone' based on a non-NULL return value
which never failed.
Also fixes two leaks where the the result of BLI_str_quoted_substrN
wasn't freed.
Also makes NLA tracks and strips overridable.
User can either edit existing strips in existing NLA tracks (but not add or remove them), and/or add new NLA tracks after those comming from the linked data.
Most of the work was as usual checking operators and adding protections against illegal operations in override context.
Note that since we can only rely on indices to deal with local added tracks, we forbid any local track being before any linked/original track.
Maniphest Tasks: T72629
Differential Revision: https://developer.blender.org/D9611
The transform modes `shrinkfatten` and `seq_slide` have a special way of
handling events.
They use modal events in a different way than expected.
Therefore, this commit adds special event handles for these modes and
removes the keymodal tips from the status bar.
These effects are already described in the header anyway.
Technically it shouldn't have any effect on these editors.
The key tips in the header can be misleading.
The effect it previously had was not intended.
With rBc0677b662f4b, we try to track all modal events in order to detect the
one corresponding to the release.
But modifier keys can mask the modal event and thus confirm realease ends up
being skipped.
This resulted in the T83387.
With this commit we now read the actual key drop value in the modal event.
This fixes T83387
This fixes T68521, T82334.
The object are not properly mirrored in object mode.
For mirroring an object that has an arbitrary rotation along the X axis
this is the procedure:
1. mirror x location.
2. negate x scale of the
3. negate y and z component of the rotation (independent of which rotation mode is used).
This knowledge applies now for all angles and axes to finally make the
mirror operation work in object mode.
The new mirror function has the downside that it can not (in this form)
be used with proportional editing.
This is no problem since the old behavior can still be replicated by
scaling with -1 along any axis.
The solution to get perfect mirrors can not work for scaling in general,
because in that case there could be scew created.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D9625
The change was intentional so that the orientation matrices match
(`rv3d->viewinv` becomes equal to the orientation matrix).
But, although in a projection matrix the Z axis is negative, this
should not be so from the user's point of view.
So the solution here is to negate the Z axis when the View orientation
is chosen.
This affects all modes, but is only evident for rotation.
---
Another change here is to use the final rotation value (`values_final`)
for the gizmo drawing since this value can be changed by the mode.
The transform modifiers are confirmed by releasing any button.
Thus, the operation can be falsely confirmed if the button that launched
the operation is released after the modifier has been activated.
Previously the events that confirmed the modifiers were hardcoded.
An option to fix this would be to add custom confirmation keyitens for
specific modifiers. But this can be a bit confusing and would make the
modal keymap even bigger.
So the solution here is to skip the button that launched the operation
when confirming the modifier.
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
The two entries `TFM_MODAL_AUTOCONSTRAINT` and
`TFM_MODAL_AUTOCONSTRAINTPLANE` had the same name
displayed in the UI. The latter is now includes
"plane" in it's name.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D9474
