Display statistics from CCG structure.
This makes values to be different from what is shown in object
mode, since CCG is operating on individual grids, and object
mode will stitch those grids. But on another, those values from
CCG is what sculpt mode is actually "sees" or "uses".
The number of faces should be the same in both sculpt and object
modes.
The cause is that FOREACH_OBJECT_IN_MODE_BEGIN assumed that the active
object is in the correct mode, which is wrong in this case. It also
only considered objects of the same type as active, which had to be
replaced with an explicit type parameter.
Curve/surface/text final data may be an evaluated mesh instead of a
displist, when some modifiers (constructive ones in particular) are
applied to it.
Note that this is just getting feet wet, whole draw code suffers from
the same issue! :P
Bring back per-viewport localview. This is based on Blender 2.79.
We have a limit of 16 different local view viewports.
We are using both the numpad /, as well as the regular /.
Missing features:
* Hack to make sure lights are always visible.
* Make rendered mode with external engines to support this as well
(probably just need to support this in the RNA iterators).
* Support over 16 viewports by taking existing viewports out of local view.
The code can use a cleanup pass in the future to unify the test to see
if an object is visible (or we can use TESTBASE in more places).
This commit merge the full development done in greasepencil-object branch and include mainly the following features.
- New grease pencil object.
- New drawing engine.
- New grease pencil modes Draw/Sculpt/Edit and Weight Paint.
- New brushes for grease pencil.
- New modifiers for grease pencil.
- New shaders FX.
- New material system (replace old palettes and colors).
- Split of annotations (old grease pencil) and new grease pencil object.
- UI adapted to blender 2.8.
You can get more info here:
https://code.blender.org/2017/12/drawing-2d-animation-in-blender-2-8/https://code.blender.org/2018/07/grease-pencil-status-update/
This is the result of nearly two years of development and I want thanks firstly the other members of the grease pencil team: Daniel M. Lara, Matias Mendiola and Joshua Leung for their support, ideas and to keep working in the project all the time, without them this project had been impossible.
Also, I want thanks other Blender developers for their help, advices and to be there always to help me, and specially to Clément Foucault, Dalai Felinto, Pablo Vázquez and Campbell Barton.
This commit adds number formatting (thousands separator) to the baking panel. It also adds a new function to format memory sizes (KB/GB/etc) and applies it to the baking panel and scene stats. The new function is unit tested.
Reviewers: Severin
Tags: #user_interface
Differential Revision: https://developer.blender.org/D1248
OVERVIEW
* In 2.7 terminology, all layers and groups are now collection datablocks.
* These collections are nestable, linkable, instanceable, overrideable, ..
which opens up new ways to set up scenes and link + override data.
* Viewport/render visibility and selectability are now a part of the collection
and shared across all view layers and linkable.
* View layers define which subset of the scene collection hierarchy is excluded
for each. For many workflows one view layer can be used, these are more of an
advanced feature now.
OUTLINER
* The outliner now has a "View Layer" display mode instead of "Collections",
which can display the collections and/or objects in the view layer.
* In this display mode, collections can be excluded with the right click menu.
These will then be greyed out and their objects will be excluded.
* To view collections not linked to any scene, the "Blender File" display mode
can be used, with the new filtering option to just see Colleciton datablocks.
* The outliner right click menus for collections and objects were reorganized.
* Drag and drop still needs to be improved. Like before, dragging the icon or
text gives different results, we'll unify this later.
LINKING AND OVERRIDES
* Collections can now be linked into the scene without creating an instance,
with the link/append operator or from the collections view in the outliner.
* Collections can get static overrides with the right click menu in the outliner,
but this is rather unreliable and not clearly communicated at the moment.
* We still need to improve the make override operator to turn collection instances
into collections with overrides directly in the scene.
PERFORMANCE
* We tried to make performance not worse than before and improve it in some
cases. The main thing that's still a bit slower is multiple scenes, we have to
change the layer syncing to only updated affected scenes.
* Collections keep a list of their parent collections for faster incremental
updates in syncing and caching.
* View layer bases are now in a object -> base hash to avoid quadratic time
lookups internally and in API functions like visible_get().
VERSIONING
* Compatibility with 2.7 files should be improved due to the new visibility
controls. Of course users may not want to set up their scenes differently
now to avoid having separate layers and groups.
* Compatibility with 2.8 is mostly there, and was tested on Eevee demo and Hero
files. There's a few things which are know to be not quite compatible, like
nested layer collections inside groups.
* The versioning code for 2.8 files is quite complicated, and isolated behind
#ifdef so it can be removed at the end of the release cycle.
KNOWN ISSUES
* The G-key group operators in the 3D viewport were left mostly as is, they
need to be modified still to fit better.
* Same for the groups panel in the object properties. This needs to be updated
still, or perhaps replaced by something better.
* Collections must all have a unique name. Less restrictive namespacing is to
be done later, we'll have to see how important this is as all objects within
the collections must also have a unique name anyway.
* Full scene copy and delete scene are exactly doing the right thing yet.
Differential Revision: https://developer.blender.org/D3383https://code.blender.org/2018/05/collections-and-groups/
- Read-only access can often use EvaluationContext.object_mode
- Write access to go to WorkSpace.object_mode.
- Some TODO's remain (marked as "TODO/OBMODE")
- Add-ons will need updating
(context.active_object.mode -> context.workspace.object_mode)
- There will be small/medium issues that still need resolving
this does work on a basic level though.
See D3037
Since we are ditching layers from Blender (2.8) we need a replacement to
control groups visibility. This commit introduces collections as the building
blocks for groups, allowing users to control visibility as well as overrides
for groups.
Features
========
* Groups now have collections
This way you can change the visibility of a collection inside a group, and add
overrides which are part of the group and are prioritized over other overrides.
* Outliner
Groups can inspect their collections, change visibility, and add/remove members.
To change an override of a group collection, you need to select an instance of
the group, and then you can choose "group" in the collection properties editor
to edit this group active collection instead of the view layer one.
* Dupli groups overrides
We can now have multiple instances of the same group with an original "override"
and different overrides depending on the collection the instanced object is part
of.
Technical
=========
* Layers
We use the same api for groups and scene as much as possible.
Reviewers: sergey (depsgraph), mont29 (read/write and user count)
Differential Revision: https://developer.blender.org/D2892
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
Although this is working fine, there are two changes expected in the new
future once depsgraph copy on write is implemented:
1) To call ED_info_stats_clear a callback from depsgraph, instead of the
notifier system. (that would also allow us to clear only one
SceneLayer).
2) To store/get stats from the evaluated SceneLayer, as well as iterate
over the evaluated objects as well.
Design Documents
----------------
* https://wiki.blender.org/index.php/Dev:2.8/Source/Layers
* https://wiki.blender.org/index.php/Dev:2.8/Source/DataDesignRevised
User Commit Log
---------------
* New Layer and Collection system to replace render layers and viewport layers.
* A layer is a set of collections of objects (and their drawing options) required for specific tasks.
* A collection is a set of objects, equivalent of the old layers in Blender. A collection can be shared across multiple layers.
* All Scenes have a master collection that all other collections are children of.
* New collection "context" tab (in Properties Editor)
* New temporary viewport "collections" panel to control per-collection
visibility
Missing User Features
---------------------
* Collection "Filter"
Option to add objects based on their names
* Collection Manager operators
The existing buttons are placeholders
* Collection Manager drawing
The editor main region is empty
* Collection Override
* Per-Collection engine settings
This will come as a separate commit, as part of the clay-engine branch
Dev Commit Log
--------------
* New DNA file (DNA_layer_types.h) with the new structs
We are replacing Base by a new extended Base while keeping it backward
compatible with some legacy settings (i.e., lay, flag_legacy).
Renamed all Base to BaseLegacy to make it clear the areas of code that
still need to be converted
Note: manual changes were required on - deg_builder_nodes.h, rna_object.c, KX_Light.cpp
* Unittesting for main syncronization requirements
- read, write, add/copy/remove objects, copy scene, collection
link/unlinking, context)
* New Editor: Collection Manager
Based on patch by Julian Eisel
This is extracted from the layer-manager branch. With the following changes:
- Renamed references of layer manager to collections manager
- I doesn't include the editors/space_collections/ draw and util files
- The drawing code itself will be implemented separately by Julian
* Base / Object:
A little note about them. Original Blender code would try to keep them
in sync through the code, juggling flags back and forth. This will now
be handled by Depsgraph, keeping Object and Bases more separated
throughout the non-rendering code.
Scene.base is being cleared in doversion, and the old viewport drawing
code was poorly converted to use the new bases while the new viewport
code doesn't get merged and replace the old one.
Python API Changes
------------------
```
- scene.layers
+ # no longer exists
- scene.objects
+ scene.scene_layers.active.objects
- scene.objects.active
+ scene.render_layers.active.objects.active
- bpy.context.scene.objects.link()
+ bpy.context.scene_collection.objects.link()
- bpy_extras.object_utils.object_data_add(context, obdata, operator=None, use_active_layer=True, name=None)
+ bpy_extras.object_utils.object_data_add(context, obdata, operator=None, name=None)
- bpy.context.object.select
+ bpy.context.object.select = True
+ bpy.context.object.select = False
+ bpy.context.object.select_get()
+ bpy.context.object.select_set(action='SELECT')
+ bpy.context.object.select_set(action='DESELECT')
-AddObjectHelper.layers
+ # no longer exists
```
This reverts commit 5aa19be912 and b4a721af69.
Due to postponement of particle system rewrite it was decided to put particle code
back into the 2.8 branch for the time being.
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
I know this is not so much nice to have this guys hanging
around in a general Object datablock and ideally they better
be wrapped around into a structure like DerivedMesh or
something like this. But this is pure runtime only stuff and
we could re-wrap them around later.
Main purpose of this is making curves more thread safe,
so no separate threads will ever start freeing the same path
or the same bevel list.
It also makes sense because path and bevel shall include
deformation coming from modifiers which are applying on
pre-tesselation point and different objects could have
different set of modifiers. This used to be really confusing
in the past and now data which depends on object is stored
in an object, making things clear for understanding even.
This doesn't make curve code fully thread-safe due to
pre-tesselation modifiers still modifies actual nurbs and
lock is still needed in makeDispListsCurveTypes, but this
change makes usage of paths safe for threading.
Once modifiers will stop modifying actual nurbs, curves
will be fully safe for threading.
Actually, this commit also contains wrapping runtime curve
members into own structure
This allows easier assignment on file loading, keeps curve-
specific runtime data grouped and saves couple of bytes in
Object for non-curve types.
--
svn merge -r57938:57939 ^/branches/soc-2013-depsgraph_mt
svn merge -r57957:57958^/branches/soc-2013-depsgraph_mt
