This commit ports the "Set Spline Type" node to the new curves type.
Performance should be improved in similar ways to the other refactors
from the conversion task (T95443). Converting to and from Catmull Rom
curves is now supported. There are a few cases where a lot of work can
be skipped: when the number of points doesn't change, and when the
types already match the goal type.
The refactor has a few other explicit goals as well:
- Don't count on initialization of attribute arrays when they are
first allocated.
- Avoid copying the entire data-block when possible.
- Make decisions about which attributes to copy when changing curves
more obvious.
- Use higher-level methods to copy data between curve points.
- Optimize for the common cases of single types and full selections.
- Process selected curves of the same types in the same loop.
The Bezier to NURBS conversion is written by Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D14769
The initial point count check was only being done for Bezier curves.
This revision fixes T98624 by adding the check for NURBS curves as well.
Reviewed By: HooglyBoogly
Maniphest Tasks: T98624
Differential Revision: https://developer.blender.org/D15140
This could spam the console with errors (potentionally slowing down in
cases).
Was added in rBeae36be372a6, but not used.
Maniphest Tasks: T98565
Differential Revision: https://developer.blender.org/D15113
This mirrors the C++ attribute API better, separates the implementation
of attributes from CustomData slightly, and makes functions simpler,
clearer, and safer.
Also fix an issue with removing an attribute caused by 97712b018d
meant the first attribute with the given type was removed instead of
the attribute with the given name.
Converting an attribute does not work from edit mode because
there is no attribute API implemented for BMesh, so disable the
operation in that mode and add a poll message.
Active camera is a property of Scene, so need to take scene changes into
account for such drivers to work reliably.
The fix covers all the common cases of such configurations, but some of
them might not be yet fully supported. Mainly cases when the target ID
is not covered by the copy-on-write mechanism.
There is a fuller explanation available in the code for the ease of reading
by the future generations.
Differential Revision: https://developer.blender.org/D15146
The following CMake options have been added (enabled by default),
except for the lite build configuration.
- WITH_IO_STL
- WITH_IO_WAVEFRONT_OBJ
- WITH_IO_GPENCIL (for grease pencil SVG importing).
Note that it was already possible to disable grease pencil export
by disabling WITH_PUGIXML & WITH_HARU.
This is intended to keep the lite builds fast and small for building,
linking & execution.
Reviewed By: iyadahmed2001, aras_p, antoniov, mont29
Ref D15141
As Wayland doesn't support moving the cursor, draw a cross-hair cursor
at the location used by Blender.
Without this, the cursor was locked at the location where grab started,
making some actions unusable since the cursor location was invisible.
Resolves T77311.
More information in the svn log. But basically the smooth brush
is re-using the previous one we had for hair, and the density is
representing the hair root points that are removed to reach the
desired density.
Those brushes are used by D15134.
Removal of BLT_lang_is_ime_supported which is always returns true and
is no longer needed.
See D11800 for more details.
Differential Revision: https://developer.blender.org/D11800
Reviewed by Campbell Barton
If a geometry does not have CustomData for a certain domain,
it may still have CustomData on other domains. In that case
we need to continue to the other domains instead of returning.
This worked for meshes because the domains are all at the
start of the `info` array. It didn't work for curves.
`math::divide_ceil` is just the vector implementation of `divide_ceil_u`.
`math::ceil_to_multiple` is similar but finaly multiply by the divisor.
It is handy to handle tile buffers resolutions.
This bug was unreported. This was triggering a linking error caused by
the vertex shader not having a local version of `attr_load_temperature_post`
and `attr_load_color_post`.
This was caused by the `copy_m4_m4` trying to copy the `object_to_texture`
from `drw_grid` which was `nullptr`.
Fixing this also exposed that rendering such volumes (without any valid
grid attributes) is not supported and we should follow what Cycles does.
Differential Revision: https://developer.blender.org/D15147
Viewport drawing does not support a per point radius attribute yet.
Instead, it has a fixed set of radius parameters that are used for all
curves in the same object. Now those radii are retrieved from the
radius attribute of the points on the first curve. This allows users
to control the radius of curves to some degree until proper per-point
radius is supported.
This function only checked for uniqueness in the current domain,
while attribute names should be unique among all domains within
a geometry.
Differential Revision: https://developer.blender.org/D15144
If `cancel` is `false`, `NULL` `inter` pointer dereferencing could occur.
Currently I haven't found a case where this can happen.
But it's best to avoid.
Those cyclic dependencies (lib_A depends on a texture from lib_B, which
links geometry from lib_A) are bad, but previous code did not always
helped much in idendtifying to actuall issue point.
Now, reduce maximum 'recursion' level to 100 (this should already never
be reached in practice), and additionally report warnings when reaching
level 90, so that user gets more context data to identify more easily
the culprit.
This avoid leaving a `GPUMaterial` in a `GPU_MAT_QUEUED` state which would
block rendering.
Fix T98603: Hang when saving project in material preview mode
Maniphest Tasks: T98603
Differential Revision: https://developer.blender.org/D15135
Good side effect of the change is that it makes it so that the
size of an array is more likely to be calculated at a compile time.
More ideally we'll be using bli::Array instead of the bare array,
but that is outside of the scope of this change.
NOTE: this patch originated in T98015 which was split into multiple
reports. While it could be split into multiple patches these are very
much related so keeping as one for now
This patch fixes the following issues:
[1] autokeying transforms in preview only creates keyframes if there is
an FCurve already
[2] autokeying transforms in preview only creates keyframes for
rotation/scale if rotating/scaling around cursor (should keyframe
position as well)
[3] autokeying transforms in preview does not work during animation
playback
For [1], a param was added to `ED_autokeyframe_property` which can tweak
its default behavior of only creating keyframes on already keyed
properties (which was fine because this is mostly called from buttons
where this behavior is desired). Callers such as gizmos (or the VSE in
our case) can use this additional param so that keyframes are also
created on "not-yet-keyframed" properties.
For [2], the pivot is checked and position properties also keyed if
necessary (which is also consistent with the way objects are keyed in
the 3DView)
For [3], `animrecord_check_state` was changed to be able to work on
scenes as well and the transform system in the VSE preview was made
aware of the screen's `animtimer`.
NOTE: there are still things to be improved for keyframing in the VSE,
the most obvious is probably a `keyframe_insert` operator (with
keyingsets)
Fixes T98429, T98430, T98431
Maniphest Tasks: T98015, T98431, T98430, T98429
Differential Revision: https://developer.blender.org/D15047
To match the existing Python .obj importer, and to make it easier for
the user to determine which object is which, use the filename for the
default object name instead of "New object".
Differential Revision: https://developer.blender.org/D15133
Since [0], transform gizmos are no longer hidden during transform.
The same can be observed for rotation gizmos.
However, as a workaround for these rotation gizmos, there was already a
drawing utility running.
With the gizmo and the utility this drawing is now being done twice.
So remove the utility/workaround and update the gizmo accordingly.
[0] {648350e456490f8d6258e7de9bf94d3a6a34dbb2}
Differential Revision: https://developer.blender.org/D9542
