Even though the dope sheet respects the pinned channels, it did not show the icon to interact with the pinned state.
This adds the icon to the dope sheet as well.
{F14178715}
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D17061
Ref: D17061
When using the "normalized" display of FCurves in the
Graph Editor, and also turning on the preview range,
the normalized display would break.
The preview frame range was assumed to be bezt indices,
which is only true when every frame has a key.
Reviewed by: Colin Basnett
Differential Revision: https://developer.blender.org/D16987
Ref: D16987
These warnings can reveal errors in logic, so quiet them by checking
if the features are enabled before using variables or by assigning
empty strings in some cases.
- Check CMAKE_THREAD_LIBS_INIT is set before use as CMake docs
note that this may be left unset if it's not needed.
- Remove BOOST/OPENVDB/VULKAN references when disable.
- Define INC_SYS even when empty.
- Remove PNG_INC from freetype (not defined anywhere).
Use a consistent style for declaring the names of struct members
in their declarations. Note that this convention was already used in
many places but not everywhere.
Remove spaces around the text (matching commented arguments) with
the advantage that the the spell checking utility skips these terms.
Making it possible to extract & validate these comments automatically.
Also use struct names for `bAnimChannelType` & `bConstraintTypeInfo`
which were using brief descriptions.
In case there is only 1 key on the FCurve,
the operator can run into a situation where it divides by 0.
It now skips the curve in that case
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16982
Ref: D16982
This was the case when an Annotation is also present as in the report.
Since {rB92d7f9ac56e0}, Dopesheet is aware of greaspencil/annotations
(displays its channels/keyframes, can rename their data, layers, fcurve
groupings etc.). However, the Graph Editor does not display these /
should not be aware of them.
Above commit already had issues that were addressed in the following
commits (mostly adding the new `ANIMFILTER_FCURVESONLY` to places that
dont handle greasepencil/annotations)
- {rBfdf34666f00f}
- {rB45f483681fef}
- {rBa26038ff3851}
Now in T103303 it was reported that doublicking a channel would not
select all fcurve`s keyframes anymore and this wasnt actually an issue
with that particular operator, but instead with another operator that is
also mapped to doubleclicking: the channel renaming (I assume the
keyconflict here is actually wanted behavior).
Channel renaming would not return `OPERATOR_PASS_THROUGH` here anymore
in the case nothing cannot be renamed, so we would not actually reach
the 2nd operator at all (the one selecting all keyframes).
Deeper reason for this is that the renaming operator would actually
"see" a channel that could be renamed (in the case of the report: an
annotation layer), but then cannot proceed, because the "real"
underlying data where the doubleclick happens is an fcurve...
So now exclude non-greasepencil channels in filtering as well where
appropriate by also adding `ANIMFILTER_FCURVESONLY` to the filter there.
Fixes T103303.
Maniphest Tasks: T103303
Differential Revision: https://developer.blender.org/D16871
Added a new operator that aligns selected keys on an exponential curve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9479
Ref: D9479
Expand the motion path frame range options with an extra option "Manual
Range". When chosen, Blender will not automatically update the path
range any more.
Additionally, the start/end frame fields are greyed out in the UI when
one of the automatic range options is selected (i.e. all but the new
"Manual Range" one). It is still possible to set the start/end frame
temporarily, but the original behaviour (of recomputing those on update)
remains.
Manifest Task: T101522
Required by Metal backend for efficient shader compilation. EEVEE material
resource binding permutations now controlled via CreateInfo and selected
based on material options. Other existing CreateInfo's also modified to
ensure explicitness for depth-writing mode. Other missing bindings also
addressed to ensure full compliance with the Metal backend.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16243
Simplify checks so that one check doesn't influence the following one.
Checks no longer pass the last-visited frame number into the "start frame"
parameter of the next check. This way all test values are hard-coded and
easy to read, without having to understand how all the checks fit together.
No functional changes.
Replace `EXPECT_NE(column, nullptr)` with `ASSERT_NE(column, nullptr)` to
abort the test on failure. With `EXPECT_NE`, the test would continue onto
the next like, which accesses `column->cfra` and would segfault.
No functional changes to the tests. Just better reporting of failures.
The `animdata_filter_mask()` was not respecting the filter flag of
`ANIMFILTER_FCURVESONLY` which lead to cases when animation system
element is effectively cast from `MaskLayer*` to `FCurve*`.
The proposed solution more closely follows the GreasePencil filtering
makes it so when `ANIMFILTER_FCURVESONLY` flag is uses no mask layer
channels will be added.
Differential Revision: https://developer.blender.org/D16498
Grease pencil data keyframes were listed twice in the summary.
First by the generic object data listing,
which did not handle properly grease pencil objects,
and did not account for the grease pencil filter.
Second by the specific grease pencil function.
Now only the second call is made,
and the filter hides keyframes in summary as well.
Reviewed By : Jeroen Bakker, Falk David
Differential Revision: https://developer.blender.org/D16369
Operations to rearrange channels in the main dopesheet
did not cover grease pencil layer channels.
Now grease pencil layer channels can be moved up and down
in the main dopesheet just like other channels.
Reviewed By: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D15542
A number of operators were missing poll messages when disabled.
These are the following new error messages:
1. "No markers are selected"
2. "Markers are locked"
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16403
This fixes T102218, where baked f-curves would display incorrectly when normalized.
This bug was a result of the code making no effort to determine the y-range of baked f-curves, so it fell back to a default that looked horrible.
I've added specific handling for finding the y-range of each f-curve (I extracted this functionality out to a new function, `fcurve_scene_coord_range_get`, for organization purposes). In addition, a minor optimization was made to eliminate redundant range-checks when in preview range mode.
{F13838304}
Reviewed By: sybren
Maniphest Tasks: T102218
Differential Revision: https://developer.blender.org/D16363
Motivation is to disambiguate on the naming level what the matrix
actually means. It is very easy to understand the meaning backwards,
especially since in Python the name goes the opposite way (it is
called `world_matrix` in the Python API).
It is important to disambiguate the naming without making developers
to look into the comment in the header file (which is also not super
clear either). Additionally, more clear naming facilitates the unit
verification (or, in this case, space validation) when reading an
expression.
This patch calls the matrix `object_to_world` which makes it clear
from the local code what is it exactly going on. This is only done
on DNA level, and a lot of local variables still follow the old
naming.
A DNA rename is setup in a way that there is no change on the file
level, so there should be no regressions at all.
The possibility is to add `_matrix` or `_mat` suffix to the name
to make it explicit that it is a matrix. Although, not sure if it
really helps the readability, or is it something redundant.
Differential Revision: https://developer.blender.org/D16328
Updates the function checking if a container can have grease pencil layer keyframes, to account for dopesheet in main mode, and timeline.
Reviewed By: Sybren A. Stüvel
Differential Revision: http://developer.blender.org/D16132
Used in action_select to refactor the selection operators.
No functional changes.
Reviewed By: Sybren A. Stüvel
Differential Revision: http://developer.blender.org/D16168
Change some wording of tooltips for readability, in animation-related
areas (drivers, keying sets, animation channel visibility).
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16131
This is the conventional way of dealing with unused arguments in C++,
since it works on all compilers.
Regex find and replace: `UNUSED\((\w+)\)` -> `/*$1*/`
After the redo panel is added to animation editors in D14960, many
operators have now been adjusted to appear and function correctly.
A full list of changes is tracked in T98195.
This patch only includes actual usability fixes. It does not do any
changes for the user's convenience, like adding other helpful properties
to operators. This can be done in a follow-up patch.
Reviewed By: sybren
Maniphest Tasks: T98195
Differential Revision: https://developer.blender.org/D14977
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
Related to {D15885} that requires scene parameter
to be added in many places. To speed up the review process
the adding of the scene parameter was added in a separate
patch.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15930
- ACTIVE flag is no longer in use.
- DESELECT was used in some places as an alias for false,
even though this could arguably help readability, in practice this
was often passed with a selection flag leading to confusing calls
such as `select_beztriple(bezt, DESELECT, SELECT, HIDDEN)`.
Replace SELECT/DESELECT with true/false in these cases.
- Remove ED_types.h. Add a 'SELECT' definition to DNA_anim_types.h,
for fcurve_test, we could use a shared DNA header, or remove use of
the define entirely in favor of typed enums.
This removes the defunct handling of the ACTIVE flag in
TimeMarker::flags. It's not possible for that flag to be set though
normal operation.
Differential Revision: https://developer.blender.org/D15828
The only difference between `GPU_SHADER_2D_LINE_DASHED_UNIFORM_COLOR`
and `GPU_SHADER_3D_LINE_DASHED_UNIFORM_COLOR` is that in the vertex
shader the 2D version uses `vec4(pos, 0.0, 1.0)` and the 3D version
uses `vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
The only real difference between `GPU_SHADER_2D_UNIFORM_COLOR` and
`GPU_SHADER_3D_UNIFORM_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_UNIFORM_COLOR'' and '3D_UNIFORM_COLOR'
is 'UNIFORM_COLOR', but the old names still work for backward
compatibility.
Differential Revision: https://developer.blender.org/D15836
Added [0] which notes in most cases results are the same but in some
cases the result seems better. While true at the time of writing since
then mat3_to_quat has been improved and used for nearly all matrix
to quaternion conversion.
0: 876cfc837e
With libepoxy we can choose between EGL and GLX at runtime, as well as
dynamically open EGL and GLX libraries without linking to them.
This will make it possible to build with Wayland, EGL, GLVND support while
still running on systems that only have X11, GLX and libGL. It also paves
the way for headless rendering through EGL.
libepoxy is a new library dependency, and is included in the precompiled
libraries. GLEW is no longer a dependency, and WITH_SYSTEM_GLEW was removed.
Includes contributions by Brecht Van Lommel, Ray Molenkamp, Campbell Barton
and Sergey Sharybin.
Ref T76428
Differential Revision: https://developer.blender.org/D15291
Channel selection in graph editor was broken by rB3c5620aabd33 because
the selection took into account grease pencil channels. Such channels
are now removed from selection in containers that does not use them (NLA
and Graph Editor).
Grouping was broken from a similar issue. The grouping operation now
completely filters out grease pencil channels since the operator is only
defined for f-curve channels.
Reviewed By: sybren
Maniphest Tasks: T100093
Differential Revision: https://developer.blender.org/D15601
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
