Vpaint/weight/texture/UV modes were disabling zbuffer draw after drawing
the active object, causing objects to be drawn after (only selected ones)
to have no zbuffer on.
particle generator can be duplicated.
Note that the particles are only generated once, on the original, and just
get duplicated.
For static particles it worked already OK.
Added note for previous grouping commit; group-duplicators should support
fully all animation systems, including modifiers and particles.
-> Any Group Duplicate now can get local timing and local NLA override. This
enables to control the entire animation system of the Group.
Two methods for this have been implemented.
1) The quick way: just give the duplicator a "Startframe" offset.
2) Advanced: in the NLA Editor you can add ActionStrips to the duplicator
to override NLA/action of any Grouped Object.
For "Group NLA" to work, an ActionStrip needs to know which Object in a
group it controls. On adding a strip, the code checks if an Action was
already used by an Object in the Group, and assigns it automatic to that
Object.
You can also set this in the Nkey "Properties" panel for the strip.
Change in NLA: the SHIFT+A "Add strip" command now always adds strips to
the active Object. (It used to check where mouse was). This allows to add
NLA strips to Objects that didn't have actions/nla yet.
Important note: In Blender, duplicates are fully procedural and generated
on the fly for each redraw. This means that redraw speed equals to stepping
through frames, when using animated Duplicated Groups.
-> Recoded entire duplicator system
The old method was antique and clumsy, using globals and full temporal
copies of Object. The new system is nicer in control, faster, and since it
doesn't use temporal object copies anymore, it works better with Derived
Mesh and DisplayList and rendering.
By centralizing the code for duplicating, more options can be easier added.
Features to note:
- Duplicates now draw selected/unselected based on its Duplicator setting.
- Same goes for the drawtype (wire, solid, selection outline, etc)
- Duplicated Groups can be normally selected too
Bonus goodie: SHIFT+A (Toolbox) now has entry "Add group" too, with a
listing of all groups, allowing to add Group instances immediate.
-> Library System
- SHIFT+F4 data browse now shows the entire path for linked data
- Outliner draws Library Icons to denote linked data
- Outliner operation added: "Make Local" for library data.
- Outliner now also draws Groups in regular view, allowing to unlink too.
-> Fixes
- depsgraph missed signal update for bone-parented Objects
- on reading file, the entire database was tagged to "recalc" fully,
causing unnecessary slowdown on reading.
Might have missed stuff... :)
In Armature Pose-bone panel, the 'hide' button got replaced with a button
where you can type (TAB complete works) a name for a Mesh Object. It then
draws that Object instead of the indicated bone drawing type.
Fixes for bone layers:
- Akey in Editmode didnt work proper (now deselects all non visible bones
too. selection for editmode works on the vertices, not bones...
- Snap in Editmode now respects layers
Works like for Object layers, but local within Armature itself. Each Bone
can be in (16 now) any layer, and the Armature layer defines what is
visible or not. Also note that hiding will still work too.
Since the Blender code is *stuffed* with Bone options now, this commit
requires a good test if all tools we got now comply to layers...
(I counted 130 cases for checking for selected Bones in code!)
In PoseMode; hotkey M will show 'movetolayer' menu. Not in editmode...
then its the mirror menu.
Todo: make action/nla drawing comply to Armature layer settings.
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
sets. To fix it, I got rid of a very ancient hack to enable set grey wire
drawing (setting a global to pretend it's picking select draw).
Now this setting is nicely passed on via functions as argument.
Instead of disabling zbuffer while drawing it, it now still writes zvalues,
but not tests for it. That way the centers are visible independent of
drawing order.
still drawing all (zero sized) particles with "disp" option set to <100.
Fast graphics card show the issue less evident, but especially with a
giant amount of particles (100k) very much noticable. Thanks!
represents whether shadows are on for that lamp or not. Now, it properly
takes into consideration what type of lamp it is, and whether it can have
whatever type of shadow.
Things like this, and the inner spot circle representing the Spot Blur should
really be documented somewhere, I'll make a note.
* Decreased the size of the hemi lamp arcs.
This commit is based on the patch & cool design work of Matt. It includes
the new Lamp drawing style, and replaces the Object center dots with a
similar styled OpenGL drawn dot.
Important side-note is that removing the old glDrawPixels() for centers or
lamps will not only make Blender faster, but also prevents crashing on a
couple of cheaper 3d cards (as reported for S3 and Intel on-board cards)
Notes:
- The new default only draws Object centers when selected or active. If
you like to see them always, use the View Properties Panel. You can also
save that in the .B.blend
- The size for centers (and lamps) is in the User settings "View & Controls"
- Unselected Lamps, and their offset lines from zero Z, are drawn in a new
Theme color
Changes and additions in Matt's patch:
- Lamps and centers are drawn fixed size, in pixels. Also the 'sun' lamp
draws screen aligned now.
- Center dots now also draw in blue to denote Library linkage or to show
that an Object has been linked to other scenes.
- When objects are empty (no vertices) they will always draw a center dot.
Otherwise these objects would never be selectable anymore!
- Added theme setting for center size, and initialization
- Removed the old redundant code for drawing centers
- Cleanup of drawing routines, made center dots faster
- Started removing calls to glBlendFunc(). Regular alpha drawing should
become standard, and the (very) occasional exception should return this
to default after usage.
http://www.blender.org/bf/rt3.jpg
It uses Material color and specular, like for the solid faces.
- Depgraph Fix for changing object layers, should re-evaluate dependencies
- Fix for setting curves to 3D by default (on adding a Guide field)
http://www.blender3d.org/cms/New_Particle_options_a.721.0.html
There's no doubt this patch had a lot of good ideas for features, and I
want to compliment Janne again for getting it all to work even!
A more careful review of the features and code did show however quite some
flaws and bugs... partially because the current particle code was very much
polluted already, but also because of the implementation lacked quality.
However, the patch was too good to reject, so I've fixed and recoded the
parts that needed it most. :)
Here's a list of of most evident changes in the patch;
- Guides support recoded. It was implemented as a true 'force field',
checking all Curve path points for each particle to find the closest. Was
just far too slow, and didn't support looping or bends well.
The new implementation is fast (real time) and treats the paths as actual
trajectory for the particle.
- Guides didn't integrate in the physics/speed system either, was added as
exception. Now it's integrated and can be combined with other velocities
or forces
- Use of Fields was slow code in general, made it use a Cache instead.
- The "even" distribution didn't work for Jittered sample patterns.
- The "even" or "vertexgroup" code in the main loops were badly constructed,
giving too much cpu for a simple task. Instead of going over all faces
many times, it now only does it once.
Same part of the code used a lot of temporal unneeded mallocs.
- Use of DerivedMesh or Mesh was confused, didn't work for Subsurfs in all
cases
- Support for vertex groups was slow, evaluating vertexgroups too often
- When a vertexgroup failed to read, it was wrongly handled (set to zero).
VertexGroup support now is with a name.
- Split up the too huge build_particle() call in some parts (moving new code)
- The "texture re-timing" option failed for moving Objects. The old code used
the convention that particles were added with increasing time steps.
Solved by creating a object Matrix Cache.
Also: the texture coordinates had to be corrected to become "OrCo".
- The "Disp" option only was used to draw less particles. Changed it to
actually calculate fewer particles for 3D viewing, but render all still.
So now it can be used to keep editing realtime.
Removed;
The "speed threshold" and "Tight" features were not copied over. This
resembled too much to feature overkill. Needs re-evaluation.
Also the "Deform" option was not added, I prefer to first check if the
current particle system really works for the Modifier system.
And:
- Added integration for particle force fields in the dependency graph
- Added TAB completion for vertexgroup names!
- Made the 'wait cursor' only appear when particles take more than 0.5 sec
- The particle jitter table order now is randomized too, giving much
nicer emitting of particles in large faces.
- Vortex field didn't correctly use speed/forces, so it didn't work for
collisions.
- Triangle distribution was wrong
- Removed ancient bug that applied in a *very* weird way speed and forces.
(location changes got the half force, speed the full...???)
So much... might have forgotten some notes! :)
We decided that the dashed lines were too much,
making the view very busy with dashed parent lines,
lamps, etc. So now the camera lines are drawn solid,
but the arrow (now triangle by andy's demand!) is drawn
outlined for inactive cameras, filled for the active
camera.
* Made the in-camera view dashed border lines less jarring
and disturbing. We will give it some testing here, feedback
is welcome.
* Showing the title safe zone is now an option in the
camera edit buttons. It's not very useful if you're not
making stuff for video/broadcast so you can turn it off.
* Passepartout is now a flag per camera, rather than per
scene. It never really belonged in the render buttons or as
Scene data, though it could be up for debate whether it's
better as camera data or view data (i.e. in the view
properties panel). Old files get converted over nicely with
this so if you had passepartout on before, it stays on the
cameras.
* Added an option to show the current camera's name at
the bottom of the in-camera view, to help keep track of
which one you're seeing when using multiple cameras.
* In the 3D View (non-camera view) the active camera is
drawn with a solid line as before, while non-active
cameras are drawn with a dashed line, to help visualise
which one is active.
directory... so the slowdown was still evident!
Maintenance commit;
- *Giant* speedup for LMB frame-dragging in ipo/action/nla windows. It was
calling a routine that accessed frontbuffer drawing.... a very old patch
for SGIs even! :)
- Prepared code for support of unlimited Shape keys
- Curve objects didnt draw correct for selection-outline option
User doc: http://www.blender3d.org/cms/Shape_Keys.678.0.html
- The mixed use of "Vertex Key","Key" or "RVK" in Blender was a bit
confusing. Also a 'vertex key' assumes keys per vertex, which actually is
only a single key for the entire shape. The discussions on blender.org
forums all mentioned "Shape" or "Blend Shapes", which I think is an OK
name for a "Vertex Key" in the UI. :)
- Most work was code spaghetti cleanup. Doing shape-keys now nicely goes
via the depgraph and DerivedMesh. That then allows to have different
shapes per object, with the new "Pin" feature.
Objects now define what Shape is shown (ob->shapenr)
- Added a Shape Panel in the Edit buttons with the various options
- Fixed a lot of issues in the IpoWindow, with drawing the channels.
For example, deleting a key-line there caused the entire Relative option to
go wrong, same for moving the lines up/down.
Changing key-line order now reflects in order of channels. The active
Shape is drawn more clear now too.
- Noticed it doesnt work yet for curves/lattice. Need modifier advise!
by daniel before. :)
Note; the shaded display uses smooth normals by default, because thats how
the derived mesh works!
Daniel; I've changed the G_WEIGHTPAINT hack in derivedmesh code... no idea
how this could work even. Still ugly though.
In Surface editmode, solid draw mode, curves are drawn in wire now
(where in invisible). Its a simple fix, it shouldn't give issues with
the Nurbana work. :)
reads from the old mface->edcode flag to set edge drawing.
ALso; added a pointer check in draw_mesh_object(), here the derivedmesh
gives NULL on reading regression file lostride.blend. Zr needs to check!
- convert weightpaint/vertexpaint to draw using drawMappedFaces, slightly
hacky because during weightpaint mcol's get overridden in order to
have them propogate through modifiers. should work fine.
- add NULL check in shaded draw, prevents crash w/ dupliframe
- revert to drawLooseEdges instead of general drawEdgesFlag
- ditched TFace edge flags, done dynamically now which also
means don't need to recalc surface on flag changes
- added BLI_edgehash, guess what it does
to get rid of faces with MFace.v3==0
- change all Mesh's to have ->medge now. This is forced by make_edges
on readfile, and in the various exotic important routines, and on
conversion back in python.
- make python NMesh structure always have medges now (needs testing)
- with above two changes it is guarenteed that mf->v3 is never ==0
in main blender code (i.e., all MFace's are actually triangles
or quads) and so I went through and removed all the historic tests
to deal with MFace.v3==0. Equals lots of deleting, I am in heaven!
- removed MEdge edcode flag, no longer needed
- added experimental replacement for edge flag system
Still are some inconsistencies in FACESELECT mode edge drawing to
be ironed out.
NOTE: This commit adds an experimental edge flag calc system, based
on 10-seconds-of-thought algorithm by yours truly. Would appreciate
feedback on how this system works, esp compared to old one and esp
on complex or interesting models.
To Use: New system is enabled by setting G.rt to a value between
1 and 1000 (Value of 0 uses old system). Value 1000 is reserved for
"auto" edge, which is more or less identical to old system but also
makes sure that at least 10% of edges are drawn (solves errors for
super subdivided meshes). Values between 1 and 999 act as percent
(out of 1000) of edges that should be drawn, starting with "most
interesting" edges first. Please try it and comment!
Press ALT+B in 3d window, draw a rect, and it becomes a clipping
volume of 4 planes. You then can rotate the view anyway you like.
Works for each 3d window individually.
Disable it with another ALT+B press.
Commit is huge because it had to change all selection code as well.
The user-clipping planes are in 'eye space', the other clipping
happens in projected 'viewport space'.
Nice to notice is that the 'x=3200' convention (to denote a coordinate
is clipped) now is a define. Define value is still a number though... but
we now can get up to screens of 12000 pixels without issues!
Known issue; here it refuses to draw the 'object centers' or Lamp icons
within the clipping region. Can't find any reason for it... however, we
might move to non-pixmaps for it anyway.
Testing might reveil numerous issues, will be standby for it.
Curious? Check this http://www.blender.org/bf/rt4.jpg
- added user settable defaultEdgeData (for auto edge creation
in CCGSubSurf)
- bug fix, possible crash on meshes with loose edges but
in mface not in medge
- missed file in last commit, for proper updating in image
window
errors
- change drawimagespace to check and update object data if
it needs a recalc. this fixes errors with a recalc being
flushed but not actually being done before spaceimage
redraws. Updates typically actually happen in draw loop,
which is not a great design...
- make shared vertexcol didn't flush update
mapping (instead of Edit{Vert,Edge,Face} pointers)
- dropped convertToDispListMeshMapped (whew, glad of it too)
- added DerivedMesh drawMappedFaces function
- dropped EM suffix for DerivedMesh functions, it was neither
particularly correct nor descriptive
- converted test_index_mface to test_index_face that also corrects
MCol and TFace. Good thing we had three versions of this routine,
you never know when one might burn down.
- removed flipnorm_mesh, not used anymore (and was incorrect to
boot)
- Getting face select to work with modifiers turned out to be much
more complicated than expected. Reworked mapping architecture for
modifiers - basically elements in a DispListMesh are now required
to be stored in an order that corresponds exactly to original
ordering. MVert/MEdge/MFace all have a new flag ME_XXX_STEPINDEX
that is set on each element that is set on the first derived element
of each original element. I can't say the code to follow these
requirements for subsurf is particularly transparent, but on the
upside it is a reasonably consistent and simple system that is memory
efficient and allows keeping the DispListMesh structure.
- rewrote mirror modifier to be simpler/conform to new requirements
for mapped DispListMesh structure. This also means that mirror interacts
much better with incremental subsurf calculation (it used to recalc
one entire side on any topology change, now it generally avoids that).
- added EM_{init,free}_index_arrays and EM_get_{vert,edge,face}_for_index
functions to handle mapping indices back into appropriate EditMesh
structures.
- bug fix, make edges didn't recalc object data
- bug fix, initial image assignment to TFace's didn't recalc object data
- new feature, added circle select support for FACESELECT
- bug fix, creating new faces in editmode duplicated the TFACE active
flag - but there should only be one active tface
- bug fix, possible crash when deleting all faces in faceselect mode
on mesh with tfaces...
Still todo: TFace edge drawing is still not always correct in face
mode, in particular with a mirror modifier when mesh has edges (and
no preceeding subsurf). Have not yet decided how to deal with this.
Best solution is probably to do switch to meshes all having MEdge's,
in which case I can get rid of TFace edge flags (and need to recalc
modifiers on tface selection change).
- The "Skinnable" option for Bones now is taken into account for the
Envelope drawmode. If not Skinnable, it also doesn't draw the soft
deform area. Maybe bone should be hidden... dunno yet.
- Use CTRL+LMB in weightpaint mode to sample the weight in a mesh.
Note; it returns the weight of the closest visible vertex, not of a
Blended result.
- NKey Panel for Mesh edit now shows a menu with the VertexGroup name(s)
of a selected Vertex, plus the Weight.
Fix:
- while scaling Bone points in editmode (Envelope drawtype), the Bone
root scale was not copied from (or to) the parent tip. This was not
visible (is not drawn) but deform did use it... causing weird errors.
For those who saw this error today: just go into editmode, select all
Bones, press Skey, enter. That fixes it :)
- removed DerivedMesh.drawLooseEdges and replaced with much more
general drawEdgesFlag function that draws based edge flags.
- switch DerivedMesh.drawFacesTex to give user control over which
faces are drawn
- added object_uvs_changed and object_tface_flags_changed functions
to do object recalc flag flush/redraw queueing and added calls
in appropriate places
- added various edge flags to mark TFace information. This is used
by the drawEdgesFlag routine and was the best way I could come
up with to deal with drawing TFace information from modifier stack.
Unfortunate side effects are (1) uses a lot of MEdge flags (although
not needed in file so thats fine) and (2) requires recalculation
of modifier stack on UV selection changes. #2 is disappointing
but I could not find a better solution.
- update UV mesh shadow drawing to use modifier result. At the moment
just uses the final result but probably should be integrated with
the editmode cage option.
- convert draw_tfaces3D to use drawEdgesFlag routine which cleaned
up the code quite a bit.
- convert draw_tface_mesh to draw using result of modifier stack.
Same comment about which result actually gets draw in FACESELECT
mode as for UV editor shadow drawing applies.
There is a still a bug in that selection is using the wrong
mesh to draw.
- new feature, twiddled with lattice resizing to try to maintain
existing vertex changes... much nicer than just resetting the
lattice if you decide you need more detail in the lattice.
- modifiers work with lattices now. yes, that does mean you
can make a chain of lattices effecting each other 8 miles
long.
- some cleanup of softbody code, was rather splintered and call
path was twisted and confusing. reworked main object step
routine to do things in a more obvious and consistent manner
and without duplicate code
- added ob->softflag OB_SB_RESET instead of sbObjectReset
call
- modifier changes reset softbody now
- moved curve_getVertexCos/curve_applyVertexCos into curve.c
- update curve modifier eval to work with virtual modifiers
- update modifier apply to work with curves/surfs
- update make parent to also recalc object data
NOTE: Although you can turn SB on for curve/font objects at the
moment it doesn't really work because they call deform in
multiple steps and this confuses SB. Not sure how to deal with
atm.
object cos into screenspace without mucking with gl matrices.
- added view3d_project_ functions, take arguments instead of using
globals
- removed View3D.{mx,my,mxo,myo}
- switch drawobject foreachScreenVert functions to use new projection
functions
- switch edge slide to use new projection functions, fixes erratic
behavior (project was using wrong mat I believe)
- bug fix in edgeslide, nearest edge to start was one-off
with "loose" edges (edges without a face) and drawing in
solid mode. they would either not draw, or draw with a nasty
selection outline. Added a ME_LOOSEEDGE flag to mark such
edges in displists/mesh and editmode sets it.
- changed DerivedMesh drawEdges to take an argument whether
it should draw loose edges or not
- removed {lattice,curve}_modifier functions
- changed render code to use displist for curve rendering
instead of making its own. required adding a bevelSplitFlag
field to DispList. I also fixed the bevel face splitting
which did not work correctly in many situations.
- changed so all curve data creation happens in makeDispListCurveTypes,
includes making bevel list and filling polys
- changed render code to use displist for surface rendering
- removed Curve.orco variable, built as needed now
- removed stupid BLI_setScanFill* functions... why use a function
argument when you can use a global and two functions! Why indeed.
(this fixed crash when reloading a file with filled curves and
toggling editmode)
- bug fix, setting curve width!=1 disabled simple bevel for no
apparent reason
- cleaned up lots and lots of curve/displist code (fun example:
"if(dl->type==DL_INDEX3 || dl->type==DL_INDEX3)"). Hmmm!
- switched almost all lattice calls to go through lattice_deform_verts,
only exception left is particles
- added DBG_show_shared_render_faces function in render, just
helps to visualize which verts are shared while testing (no
user interface).
- renamed some curve bevel buttons and rewrote tooltips to be
more obvious
- made CU_FAST work without dupfontbase hack
Also by the way I wrote down some notes on how curve code
works, nothing spiffy but it is at:
http://wiki.blender.org/bin/view.pl/Blenderdev/CurveNotes
can only follow deform (for example, they store mesh vertex
indices)
- added ModifierType.foreachObjectLink for iterating over Object
links inside modifier data (used for file load, relinking, etc)
- switched various modifiers_ functions to take object argument
instead of ListBase
- added user editable name field to modifiers
- bug fix, duplicate and make single user didn't relink object
pointers in modifier data
- added modifiers to outliner, needs icon
- added armature, hook, and softbody modifiers (softbody doesn't
do anything atm). added conversion of old hooks to modifiers.
NOTE-THE-FIRST: User name field is not initialized on loading 2.38 files
so if you have saved stuff with a cvs blender you will see blank names.
NOTE-THE-SECOND: Since modifiers aren't evaluated yet for non-Mesh
objects, hooks for lattices and curves are broken. Don't updated if
you actually, say, *use* Blender.
NOTE-THE-THIRD: Old hooks used a quirky weighting system during
deformation which can't be extended to modifiers. On the upside,
I doubt anyone relied on the old quirky system and the new system
makes much more sense. (Although the way falloff works is still
quite stupid I think).
