--debug
--debug-ffmpeg
--debug-python
--debug-events
--debug-wm
This makes debug output easier to read - event debug prints would flood output too much before.
For convenience:
--debug-all turns all debug flags on (works as --debug did before).
also removed some redundant whitespace in debug prints and prefix some prints with __func__ to give some context.
In fact, most "UI special cases" are not well translated, currently. :/ This affects especially the "Properties" panels. This commit should address problems in Graph editors, and 3D View (but probably not yet all of them). Yet it already adds more than 100 new messages (and fixes translated drawing of more).
Also done some style edits…
- spelling - turns out we had tessellation spelt wrong all over.
- use \directive for doxy (not @directive)
- remove BLI_sparsemap.h - was from bmesh merge IIRC but entire file commented and not used.
* Get rid of subrow/subcol variable names in the C UI code as well, use sub instead. This is shorter and sufficient.
* Minor layout alignment fixes.
* Greying out in NLA editor was doing nothing for "strip_time" property.
Causing a flurry of refresh file prompts post-commit,
Confusing local diffs and causing merge conflicts,
Stating the obvious; redundant and useless...
We shall not miss thou, blasted expand $keywords$
I was going to include this change along with support for moving
FModifiers around on the stack, though that looks like it might be a
bit more involved than first though. To be dealt with later...
Following on from my commit to introduce frame ranges for FModifiers,
those frame ranges can now have blend in/out values. By setting a
blendin or blendout value, you're specifying the number of frames for
the modifier's "full influence" to take effect or fade out relative to
the start/end frames.
The "full influence" above needs a little clarification.
When the "use influence" setting is enabled, "full influence" is taken
from the "influence" slider (a new setting). Otherwise, it uses 1.0
(i.e. unmodified influence, same as old behaviour before the
introduction of influence controls). The influence slider basically
says how much the modifier's effects are allowed to contribute to the
final result.
---
Notes:
- This opt-in "Use Influence" approach is really forced upon us
because there are heaps of old files for which we cannot easily
version patch without spending some effort going through all the data
in the file, hunting out the F-Modifiers.
- interpf() seems to use a backwards order compared to everything else
Using this feature, it is now possible to for example have different
noise-profiles for different parts of a curve, which makes it possible
to do animate camera shake for example.
Or perhaps, for having greater control of mixing and matching
different parts of F-Modifier effects, such as combining several
generator modifiers to get multi-case functions for instance.
See http://aligorith.blogspot.com/2011/06/gsoc11-fmodifier-range-
masks.html for details.
- removed deprecated bitmap arg from IMB_allocImBuf (plugins will need updating).
- mostly tagged UNUSED() since some of these functions look like they may need to have the arguments used later.
These are not animated and are best not change names like this too late in the release.
ActionGroup.selected -> select: boolean Action Group is selected
BezierSplinePoint.hidden -> hide: boolean Visibility status
BezierSplinePoint.selected_control_point -> select_control_point: boolean Control point selection status
BezierSplinePoint.selected_handle1 -> select_left_handle: boolean Handle 1 selection status
BezierSplinePoint.selected_handle2 -> select_right_handle: boolean Handle 2 selection status
Bone.restrict_select -> hide_select: boolean Bone is able to be selected
Bone.selected -> select: boolean
CurveMapPoint.selected -> select: boolean Selection state of the curve point
EditBone.restrict_select -> hide_select: boolean Bone is able to be selected
EditBone.selected -> select: boolean
EditBone.selected_head -> select_head: boolean
EditBone.selected_tail -> select_tail: boolean
EditBone.locked -> lock: boolean Bone is not able to be transformed when in Edit Mode
EditBone.hidden -> hide: boolean Bone is not visible when in Edit Mode
NEGATE * FCurve.disabled -> enabled: boolean F-Curve could not be evaluated in past, so should be skipped when evaluating
FCurve.locked -> lock: boolean F-Curve's settings cannot be edited
FCurve.muted -> mute: boolean F-Curve is not evaluated
FCurve.selected -> select: boolean F-Curve is selected for editing
NEGATE * FCurve.visible -> hide: boolean F-Curve and its keyframes are shown in the Graph Editor graphs
FCurveSample.selected -> select: boolean Selection status
GPencilFrame.selected -> select: boolean Frame is selected for editing in the DopeSheet
GPencilLayer.locked -> lock: boolean Protect layer from further editing and/or frame changes
GPencilLayer.selected -> select: boolean Layer is selected for editing in the DopeSheet
Keyframe.selected -> select: boolean Control point selection status
Keyframe.selected_handle1 -> select_left_handle: boolean Handle 1 selection status
Keyframe.selected_handle2 -> select_right_handle: boolean Handle 2 selection status
MeshEdge.selected -> select: boolean
MeshEdge.hidden -> hide: boolean
MeshFace.hidden -> hide: boolean
MeshFace.selected -> select: boolean
MeshVertex.hidden -> hide: boolean
MeshVertex.selected -> select: boolean
MotionPathVert.selected -> select: boolean Path point is selected for editing
NlaStrip.selected -> select: boolean NLA Strip is selected
NlaTrack.locked -> lock: boolean NLA Track is locked
NlaTrack.muted -> mute: boolean NLA Track is not evaluated
NlaTrack.selected -> select: boolean NLA Track is selected
Object.restrict_render -> hide_render: boolean Restrict renderability
Object.restrict_select -> hide_select: boolean Restrict selection in the viewport
Object.restrict_view -> hide: boolean Restrict visibility in the viewport
Object.selected -> select: boolean Object selection state
ObjectBase.selected -> select: boolean Object base selection state
PoseBone.selected -> select: boolean
Sequence.right_handle_selected -> select_right_handle: boolean
Sequence.selected -> select: boolean
SplinePoint.selected -> select_control_point: boolean Selection status
TimelineMarker.selected -> select: boolean Marker selection state
Sequence.left_handle_selected -> select_left_handle: boolean
ActionGroup.locked -> lock: boolean Action Group is locked
Bone.hidden -> hide: boolean Bone is not visible when it is not in Edit Mode (i.e. in Object or Pose Modes)
SplinePoint.hidden -> hide: boolean Visibility status
FModifier.muted -> mute: boolean F-Curve Modifier will not be evaluated
note: rebaned uv_select to select_uv
C functions and python used different argument order, this relied on mapping non-keyword arguments to 'REQUIRED' arguments but meant that you could not have an optional, non-keyword argument.
next commit will make order of arguments consistant (currently only changed order that rna wrapped).
(commit 27674 and 27683 by Campbell from render25 branch)
Only source/blender/editors/ dir, should not give errors on different platforms
Only removing: UI_*.h, ED_*.h, WM_*.h, DNA_*.h, IMB_*.h, RNA_*.h, PIL_*.h
This commit started out aiming to make the "Stepped" F-Modifier (committed last night) even more useful, but ended up fixing a few other finer-points of how F-Modifiers work.
Firstly, the new stuff:
I've addded options to the Stepped F-Modifier to not affect frames before and/or after specified values, and renamed the 'start offset' to 'offset' for clarity.
The main objective of this is to allow Stepped F-Modifiers to only affect certain time ranges, so that by layering/using multiple instances of the F-Modifier, it can be possible to have multiple stepping-sizes.
This allows for effects like:
http://www.pasteall.org/blend/2230
or in words, it provides a convenient mechanism for animators to specify whether sections of the animation is shown "on twos", "fours", or even "forty-second-ths plus a smidgen", as can be easily done with 2D.
Assorted changes to support this:
* Properly fixed up how F-Modifiers that work with time, evaluate the time to evaluate the curve at. Now layered time effects like this should be possible in a much nicer way.
* Added proper value range validation/clamping to many properties. There are still a lot more that need checking, but at least more properties now do "the right thing".
* Copy/Paste operators for F-Modifiers
Available in Graph and NLA Editors. Use the Copy/Paste buttons beside the 'Add Modifier' buttons.
Copy copies all the modifiers of the ACTIVE F-Curve or Strip depending on the editor.
Paste pastes modifiers from the buffer to all the selected F-Curves or Strips, adding the new modifiers to the ends of each list.
* 'Stepped Interpolation' F-Modifier
This modifier holds each interpolated value from the F-Curve for several frames without changing the timing.
This allows to preview motions 'on-twos' for example without altering the timing, or having to go through setting heaps of keyframes. In this case, Andy wanted to use this for CG <-> StopMo.
* Bugfix #20136: unclear tool tip for inherit rotation toggle
* Bugfix for Apply Pose as Restpose (Ctrl A in Pose Mode): missing call to free edit-data was causing drawing code to only draw editbones until editmode was entered + toggled
* Added missing notifier for deleting F-Modifiers, so deleting F-Modifiers now updates the view correctly afterwards
* Tweaked the code for operator buttons so that only those operator buttons in the toolbar have their text left-aligned. This is done at layout-block level
* Silenced "file_init" print when opening the file browser
* Disabled animateability of the "active_shape_key_index" for Objects, since this property behaves in a very unpredictable manner, leading to problems with users trying to keyframe shapekey values and ending up keying the list.
* Remove some unnecessary RNA wrapping code
