This enables self intersections in the sculpt trimming tools boolean operations.
This should fix wrong booleans results after using the operator to add new disconnected
geometry with the join mode.
Reviewed By: sergey
Maniphest Tasks: T81799
Differential Revision: https://developer.blender.org/D9423
The cloth brush fixed simulation areas are created using the initial_location variable in the
StrokeCache. This variable was not being updated by tiling symmetry, so all symmetry passes
were using the same simulation area location.
Reviewed By: sergey
Maniphest Tasks: T81842
Differential Revision: https://developer.blender.org/D9421
When extracting new objects from a mesh in sculpt mode, it makes sense to keep
the current symmetry options and settings in the new mesh. In previous versions symmetry
options were stored in the tool settings, so this bug was not that obvious.
This also preserves the remember settings in the new object, which is also the desired
behaviour.
Reviewed By: sergey, mont29
Differential Revision: https://developer.blender.org/D9417
If the new object contains the mask it always needs to be cleared before starting
sculpting on it.
This fix was also committed before in the mask extract operator.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9416
The list of buttons in the button group needs to be updated to take into
account the old button inserted into the button list for the new block.
Differential Revision: https://developer.blender.org/D9428
What I thought was an "optimization" was really a bug. The "use search
for expansion" value needs to be set for every panel, even panels in
other tabs. Otherwise it won't be properly set when switching back to
a tab that was visited during search.
Differential Revision: https://developer.blender.org/D9427
The links where added to the socket one after the other. However,
the virtual socket had a link limit of 1, so whenever a new link was
added, the previously added one was removed.
There is not really a reason for why the link limit should be 1 instead
of something higher. I'm setting it to the max value: `0xFFF`.
I'm also setting the `input_link_limit` to that value. Blender does not
need this currently, but addons might have input sockets that allow
more than one incident link.
Default backbuffers needs not to be bound with sRGB encoding
enabled. This works when using `GPU_framebuffer_restore` but
using `GPU_framebuffer_bind` would trigger the wrong behavior.
This fix T81969 UI turns whiteish when playing video sequence
based on a scene and moving in the image editor after saving
Surface deform weight calculation assigned weights in a non-uniform
way that caused vertices to deform upon binding.
This was caused by the face-corner angle being used in
calculations which where squared & scaled.
Causing a triangle fan of many thin faces to have a much greater
influence compared to the same shape made from a single triangle.
Change the calculation of the weight so each face-corner is scaled
by it's angle.
Ensure that When checking "Hide in Viewport" option for a collection
that child objects are drawn grayed out for consistency with the
"Disable in Viewports" toggle.
For checking an object visibility in the viewport the flag
BASE_VISIBLE_VIEWLAYER should be used instead of BASE_VISIBLE_DEPSGRAPH
because the latter ignores viewport visibility.
Manifest Task: T77161
Differential Revision: https://developer.blender.org/D7904
In some situations where two beveled edges were very close to in-line
but not quite straight, bevel would build a miter when it shouldn't.
The code that chose whether to use a miter at each vertex was slightly
incorrect.
For outer miters there is a check for 3 or more selected edges, but an
inner miter can still be useful with only two beveled edges at a vertex,
so we can't use that here. Instead I changed the check for in-line edges
to run before determining whether the angle is reflex or not. The logic
ends up a bit more straightforward as well. This doesn't completely
remove the rather strange looking triangle vertex meshes at each corner,
but it does make it stable when locations are slightly adjusted.
The only other place this `edges_angle_kind` function was used is for
profile=1.0 vertex meshes. I tested and made sure that still works well.
Differential Revision: https://developer.blender.org/D9420
For the fast solver, there was an optimization carried over
from the non-collection case for empty meshes which did not
work in the chained boolean code for collection operands.
Removed that optimization in the collection case.
The code that decided to use a faster double version of plane
side testing forgot to take an absolute value, so half the time
the exact code was being used when it was unnecessary.
Ensure parenting an object to itself is seen as error, by returning
`false`.
This error was introduced as part of a supposed-to-be-non-functional
cleanup rBb8d4a2aff8069dd7d6fb91ad0d9427eed489b68f.
This adds support for treating multiple undo steps as a single step
from the user perspective.
This is needed for outliner mode switching and `object.switch_object`
operator which change active object and mode in a single action.
For edit/pose modes clicking in the mode-column would include other
selected objects (besides the active object), causing other objects to
remain in the mode even though Control wasn't held.
Also replace `ED_object_mode_generic_exit(...)` on all objects with a
single call to `ED_object_mode_set(...)` so switching modes will only
exit the current mode, leaving objects in other modes unchanged.
Some subtypes never made it to all neccessary places when they were
introduced. This was throwing warnings when accessing such a properties
subtype from python.
The sub_type enums were also defined in 4 different places:
- RNA_types.h 'PropertySubType'
- rna_rna.c 'rna_enum_property_subtype_items'
- rna_rna.c 'subtype_items'
- bpy_props.c as multiple enums
This patch syncs the definitions across all places so that they are the
same everywhere. It also looks redundant to define these twice in
rna_rna.c, now just use 'rna_enum_property_subtype_items' there (and get
rid off 'subtype_items').
Also moved 'POWER' & 'TEMPERATURE' to number enum in bpy_props (these
were defined in the array enum).
Fixes T82167.
Maniphest Tasks: T82167
Differential Revision: https://developer.blender.org/D9371
The alpha of the first layer was always used
here since introduction in rBee4453f08369 and was not updated when
customdata support for alpha was added.
Now also use the interpolated alpha.
thx @brecht noticing!
ref T81914
Reviewers: brecht, mont29
Maniphest Tasks: T81914
Differential Revision: https://developer.blender.org/D9358
When the combined alpha [the 'tmp' variable having the mixfactor applied
already] - reached zero it was handled like a no-op (for the alpha as
well) and just copied the first color.
So e.g mixing 255/255/255/255 with 0/0/0/0 with a factor of 1.0 gave
alpha of 255, which looks wrong.
cases where tmp gets zero:
src1 alpha:0 src2 alpha:whatever mixfactor 0.0
src1 alpha:whatever src2 alpha:0 mixfactor 1.0
src1 alpha:0 src2 alpha:0 mixfactor whatever
Now set alpha to zero in that case.
ref T81914
Maniphest Tasks: T81914
Differential Revision: https://developer.blender.org/D9357
`sys.executable` is documented to be a Python interpreter or None.
This was set to Blender's executable which caused the multiprocessing
module to spawn new instances of Blender instead of Python on WIN32.
See issue described in D7815.
Deprecate 'bpy.app.binary_path_python' & warn when using.
Blender's executable remains accessible via `bpy.app.binary_path`.
Modified 04c5471cee, setting `sys.executable` instead of using
Py_SetProgramName, which is needed for a bundled Python installation.
Add "Selection to" as prefix for those menu items that move the selected
keyframes to something, for both the Key → Snap menu and the Shift+S pie
menu.
No functional changes.
This was missed in rB477d983c2e8ab298cbf638d5aadd77fad9c2f677
Differential Revision: https://developer.blender.org/D9304
This reverts commit 2ddecfffc3.
The correct fix is to compile with -fno-strict-aliasing on
release/relwithdebinfo builds also.
See the last commit/ {D9372}.
Maniphest Task T81077
Not sure why Collection was the only ID for which depsgraph building did
not check for potential recursion?
Reviewed By: sergey
Maniphest Tasks: T82149
Differential Revision: https://developer.blender.org/D9365
`sys.executable` is documented to be a Python interpreter or None.
This was set to Blender's executable which caused the multiprocessing
module to spawn new instances of Blender instead of Python on WIN32.
See issue described in D7815.
Deprecate 'bpy.app.binary_path_python' & warn when using.
Blender's executable remains accessible via `bpy.app.binary_path`.
The new option to filter the layers used by the Fill tool was not using the boundary strokes. The problem was the layers were skipped and any boundary stroke was not used.
Now, the layer is not skipped, but the strokes that are not boundary are skipped.
When selecting multiple layers, the redo operator might not correctly
update the pose data. To make sure it is in a good state we have to
ensure that the pose data is good.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D9354
Improved user experience by using viewport focal length
to calculate the new camera distance.
Also resizing the border to the same aspect ratio as
the window will help not zooming in more than expected.
Ref D9341
For Customdata layer copying, interpolation with the mixfactor is only
done for certain mix modes, now set the UI inactive if the mixfactor is
not in use.
Namely, the modes are the "Above / Below Threshold" which are only used
for flags, colors and normals and mixing is not supported in these cases.
Spotted while looking into T81914.
Differential Revision: https://developer.blender.org/D9327
