The (tracking) camera presets have not been updated in the last 7 or
more years, so they are very outdated. I found it pointless to have a
few specific camera models in the list and instead add the most commonly
used sensor sizes/film sizes. This way the list is shorter, easier to
maintain/becomes later outdated, and is more user friendly for most people
who don't own any of the specific cameras. I added the Crop Factor to the
Beginning of the name, so it gets sortet in the correct order and presets
are easier to find based on the size.
Reviewed By: #render_cycles, #motion_tracking, brecht, sergey
Differential Revision: https://developer.blender.org/D10739
These were only showing in the Properties Editor, but there is no reason
to have the panels be different in the sidebar (they should not show in
the top bar though).
agreed upon by both @anoniov and @mendio
ref T88787
So far, linked IDs were not properly sorted at all, only the ones
explicitely linked from WM code would be, but any indirectly linked
data-blocks would end up in some random order in their lists.
While not ideal, this is not a huge issue in itself, but it had bad
side-effects, e.g. causing (recursive) resync of overrides to happen in
random order, leading to mismatches between name indices of newly-generated
override IDs and the one existings e.g.
And in general, it is much better to be consistent here.
Note that the file sub-version is bumped for this commit, since some
sorting (the directly linked IDs which we keep a reference to) should
never need to be re-done after relevant doversion process.
This commit adds a node that outputs the total length of all
evalauted curve splines in a geometry set as a float value.
Differential Revision: https://developer.blender.org/D11459
This commit implements support for deleting curve data in the geometry
delete node. Spline domain and point domain attributes are supported.
Differential Revision: https://developer.blender.org/D11464
This implements T87633
This overlay renders a flash animation on the target object when
transfering the mode to it using the mode transfer operator.
This provides visual feedback when switching between objects without
extra overlays that affect the general color and lighting in the scene.
Differences with the design task:
- This uses just a fade out animation instead of a fade in/out animation.
The code is ready for fade in/out, but as the rest of the overlays
(face sets, masks...) change instantly without animation, having a fade
in/out effect gives the impression that the object flashes twice (once
for the face sets, twice for the peak alpha of the flash animation).
- The rendering uses a flat color without fresnel for now, but this can
be improved in the future to make it look more like the shader in the
prototype.
- Not enabled by default (can be enabled in the overlays panel), maybe
the defaults can change for 3.0 to disable fade inactive and enable this
instead.
Reviewed By: jbakker, JulienKaspar
Differential Revision: https://developer.blender.org/D11055
This operator is needed in some cases to update image preview.
In workspaces with smaller timelines this is limiting, because users
need to first check that mouse cursor is in correct place, then press
CTRL+R shortcut.
The Wayland server will not update hidden surfaces. This will block the
main event loop and thus also block updates to visible windows in a multi-
window setup.
Keyboard click-drag events now use the "Drag Threshold".
This resolves a problem where keyboard click drag events
used a much smaller threshold when using a tablet.
In some cases e.g. only objects would actually need resync, so
collections on the override character would not be resynced, and if some
objects were sharing relationships with others those could be
lost/destroyed.
max unneccessarily
Since rB298d5eb66916 [which was needed to update buttons with custom
property range functions correctly], using tab would always clamp
(hardmin/hardmax) properties which were using FLT_MAX / INT_MAX as range
in their property definitions.
The clamping of rB298d5eb66916 was copied over from rB9b7f44ceb56c
[where it was used for the softmin/softmax], and while the re-evaluation
of hardmin/hardmax is needed for custom property range functions, the
clamping should actually not take place.
There are many properties using FLT_MAX / INT_MAX etc. and while it
probably would be good to update these with ranges that make more sense
-- not using FLT_MAX / INT_MAX would not have done the clamping here --
there should not be an arbitrary limit to these and they should stay as
they are.
Maniphest Tasks: T88762
Differential Revision: https://developer.blender.org/D11473
Ensure 'virtual' linked override IDs generated by the recursive resync
process are tagged as indirectly linked data.
This is needed to avoid the 'missing data' messages on those virtual
data-blocks after saving and reloading.
`BKE_main_collections_parent_relations_rebuild`,
`BKE_collection_parent_relations_rebuild` anf their internal
dependencies had two issues fixed by this commit:
* Main one was that a same collection could be processed several times,
sometimes even in an infinite loop (in some rare corner cases), by
`collection_parents_rebuild_recursive`.
* More exotic, code here would not ensure that the collections it was
processing were actually in Main (or a master one from a scene in
Main), which became an issue with some advanced ID management
processes involving partially out-of-main remapping, like liboverride
resync.
Use SEQ_time_strip_intersects_frame function to test if strip intersects with frame.
Note: There are cases where this function should not be used. For example splitting
strips require at least 1 frame "inside" strip. Another example is drawing, where
playhead technically doesn't intersect strip, but it is rendered, because current
frame has "duration" or "thickness" of 1 frame.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11320
Remove unused flag `SEQ_DUPE_ANIM` and code used by this flag.
Remove flag `SEQ_DUPE_CONTEXT` and refactor code, to split operator
logic from duplication code.
Reduce indentation level in for loop.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11318
Images with 4:2:2 and 4:4:4 chroma subsampling were blurred when
`SWS_FAST_BILINEAR` interpolation is set for `anim->img_convert_ctx`.
Use `SWS_BILINEAR` interpolation for all movies, as performance is
not impacted by this change.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11457
Changes in rBce649c73446e, affected established proxy codec preset.
Presets were not working and all presets were similar to `veryfast`.
Tunes are now working too, so `fastdecode` tune can be used. I have
measured little improvement, but I tested this only on 2 machines and
I have been informed that `fastdecode` tune does influence decoding
performance for some users.
Change preset from `slow` to `veryfast` and add tune `fastdecode`
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11454
While encoder parameters for lossless encoding are set correctly,
output is not lossless due to pixel format being set to
`AV_PIX_FMT_YUV420P` which is inherently lossy due to chroma subsampling.
This was reported in T61569 and was merged to T57397, but there were
2 bugs - one for encoding and one for decoding.
Set pixel format to `AV_PIX_FMT_YUV444P` when rendering lossless H264
files. This format isn't available in `codec->pix_fmts[0]` and it looks,
that it has to be hard-coded.
Reviewed By: sergey
Differential Revision: D11458
This patch is from erik85, who says:
This patch makes populate_plane inside polymesh_from_trimesh_with_dissolve run in parallel.
On a test file with a boolean between two subdivided cubes (~6 million verts) this gives a 10% speed increase (49.5s to 45s) on my 6 core CPU.
Also there is an optimization of other_tri_if_manifold to skip the contains-call and get the pointer directly.
This reduces CPU time for find_patches from 5s to 2.2s on the same test file.
When there are many components (separate pieces of connected mesh),
a part of the algorithm to determine component containment was slow.
Using a float version of finding the nearest point on a triangle
as a prefilter sped this up enormously. A case of 25 icospheres
subdivided twice goes 11 seconds faster on my Macbook pro with this
change.
This just moves a couple of files in `space_node` to C++ and fixes
related errors.
The goal is to be able to use C++ data structures to simplify the code.
Differential Revision: https://developer.blender.org/D11451
The mesh to curve node generated an empty curve because no edges were
selected. This commit changes that node to not add a curve in that case.
This also changes the curve to mesh node to not add a material when
no mesh was created. Even though we don't expect null curves or meshes
in this case, the change is harmless.
