d49eeabae7
Cleanup: warnings
2015-03-16 09:37:00 +11:00
2140cb60cb
Fix T39184: Multisegment bevel profiles should curve in-plane sometimes.
...
When the multisegment profile joins two unbeveled edges, all in the same
plane, users desire that rather than the current behavior of linear
interpolation between those edges, the profile should curve.
This changes behavior to do that. The old behavior can be obtained
by setting the profile parameter to 0.25, if desired.
2015-03-15 18:24:36 -04:00
a7d292394e
Fix T43898, correct all uv layers in bevel, not only the active one
2015-03-05 18:50:44 +01:00
ced19783fd
Fix mismatch (missing 'const' to mactch funcs declarations).
...
Was breaking windows compile, reported by bdancer over IRC, thanks.
Also, quite some annoying 'unused vars' warnings (debug-only vars).
2015-02-23 13:57:02 +01:00
5a372dbd89
Fix error in recent vert/edge-slide commits
...
`CustomData_bmesh_interp_n` was expecting the 'dest' arg not to have its offset applied.
This was a bit confusing since the source args have it applied,
and in some cases we only have the destination with the offset.
2015-02-23 13:57:06 +11:00
d580c90469
CustomData: const correctness for interp()
2015-02-23 13:54:33 +11:00
7a977df6d4
Refactor array_utils out of BLI_array
...
BLI_array.h is for resizing array macros, where as array_utils can operate on any arrays.
2015-02-14 08:00:41 +11:00
dce59530d0
Fix part 1 of T43239, multisegment vertex bevel on 2-edge vertices.
...
Implemented multisegment rounding of vertices with two edges.
Works both with wire edges and edges that have one or two faces
attached.
2015-02-12 06:55:30 -05:00
d4934f8f6d
cleanup: style/indentation
2015-02-11 18:39:28 +11:00
64124ba904
BMesh: tool to ensure all faces are convex
...
Access from Mesh -> Cleanup
2015-02-02 09:23:44 +11:00
9e9cd77b8d
Compiler warning: double-promotion
2015-02-01 01:17:21 +11:00
b09563ca8c
Cleanup: fixes for building with recent clang
2015-01-14 05:11:20 +11:00
9fadacfd0f
cleanup: style
2015-01-08 19:57:50 +11:00
bf168f0600
Fix T43137: vertex bevel percent mode wasn't implemented.
2015-01-06 09:13:38 -05:00
01c04333f5
Fix T43034: beautify-fill leaves zero area tri's
2014-12-27 16:47:42 +11:00
445e50fd1e
cleanup: use cross_tri_v2 when area isn't needed.
2014-12-26 08:46:48 +11:00
0c5eb88451
Quiet warning (harmless)
2014-12-18 02:15:42 +01:00
15bde0dbea
Docs: comments (hash table & beauty fill)
2014-12-17 09:58:23 +01:00
a5c3de2e49
Fix T42630: Triangulate returns invalid face-map
...
Triangulate with beautify caused a bug when there were existing edges
could make the bmesh-operator return an invalid face-map.
Now the beauty is calculated on the 2d-tri's resulting from polyfill,
its simpler and faster.
2014-12-09 13:08:28 +01:00
6076bedec0
Cleanup: remove scanfill define for polyfill code
...
also rename vars which were previously used for scanfill.
2014-12-09 12:19:26 +01:00
a5cd6a029f
Cleanup: style & de-duplicate
2014-12-02 10:30:29 +01:00
25c5542fe7
Math Lib: add constant: M_SQRT1_3 1/sqrt(3)
2014-11-22 18:21:52 +01:00
46e2d5ee41
Cleanup: typo
2014-11-21 14:16:35 +01:00
c31f74de6b
Cleanup: use BLI_listbase_count_ex to avoid redundant looping
2014-11-16 14:23:37 +01:00
7d040d2a08
Cleanup: use BLI_listbase_*** prefix for count,sort,sort_r
2014-11-16 13:57:58 +01:00
7d4c89e6da
Correct recent refactor (use generic callback)
2014-11-06 11:47:08 +01:00
d57ce42dfa
BMesh: arg reorder
2014-11-03 08:30:54 +01:00
9b8be0bc0c
Cleanup/fix from latest coverity report.
...
Mostly harmless things, though the 'multires' error was a real bug.
2014-11-01 16:36:11 +01:00
133f79e449
Cleanup: warnings, typos
2014-10-29 14:15:21 +01:00
8d1d16bf0d
Bevel modifier: Add weight support for vertices bevelling.
...
Nothing to say here, really, just a couple of lines to add to get it working...
2014-10-15 08:57:11 +02:00
30dab51c29
Cleanup: use bool and const args
2014-10-09 22:44:03 +02:00
77af624524
Quiet warning on 32bit system
2014-10-06 09:51:51 +02:00
230c272fe3
Comments: note on bmesh_region_match
...
also correct buffer type
2014-10-03 08:21:14 +02:00
516dbaeb73
Fix for a build error with VS 2013.
2014-09-29 14:53:28 +09:00
c729ce7e05
BMesh: remove point-in-face test for bisect
...
instead track inside/outside state while stepping over intersections.
2014-09-28 19:19:58 +10:00
8e4fdba19c
Cleanup: typo
2014-09-27 20:32:12 +10:00
e6edc1b09d
Fix ocmpilation error with strict flags after the recent commit
2014-09-26 20:17:21 +06:00
2f4e70702c
BMesh: select similar regions
...
Select operator that takes multiple selected face regions and
selects any number of matching regions (when they have distinguishing features to isolate them).
UI access next.
2014-09-26 23:06:20 +10:00
90e1746d89
BMesh: correct flag use
...
Allowed fill to make duplicate faces
2014-08-21 13:08:13 +10:00
d42c085516
Fix T41517: BMesh intersect crash
2014-08-21 09:23:07 +10:00
d93c07d987
Cleanup
2014-08-21 09:23:07 +10:00
ed08597442
Correct mistake in recently added intersect tool
...
Sorting verts along an edge wasn't working reliably.
2014-08-20 12:44:11 +10:00
ea07d93f77
Fix for fix (don't guess enum's sign)
2014-08-19 07:08:15 +10:00
2a514f8e29
Fix building on some compilers (clang on OSX).
...
Reported and patch by jensverwiebe (jens verwiebe).
2014-08-18 15:39:40 +02:00
b9ebf44139
BMesh: intersect tool
...
Modeling tool to cut intersections into geometry (like boolean, without calculating inside/outside).
Faces are split along intersections, leaving new edges selected.
Access from Face menu.
2014-08-18 17:09:30 +10:00
7df4fc5eaf
Spelling
2014-08-13 09:34:37 +10:00
eadfddd02a
Cleanup: magic numbers
2014-08-12 15:58:53 +10:00
e1819cc918
Fix T40948: Fill holes fails in certain case
2014-08-08 04:30:24 +10:00
ce0ff266e9
GHash: generic comparison for int[4]
2014-07-30 07:30:18 +10:00
13a8f650df
Cleanup
2014-07-21 10:53:07 +10:00
