When selecting multiple layers, the redo operator might not correctly
update the pose data. To make sure it is in a good state we have to
ensure that the pose data is good.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D9354
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
From what I can see, there are two issues at play in {T76689} and its merged-in report {T76590}:
- In Blender ≤ 2.79 the bone layer dots were updated in the draw code. This ensured the info was up to date before drawing. This is no longer possible, as the drawing code uses evaluated objects, and those should not be written to. This has been addressed in rB709f126e8143 by calling the update function explicitly in various places in the code. The problem is that this wasn't added to all necessary spots.
- When in edit mode, changes are made to the edit bones but not to the 'actual' bones (this is synced when exiting edit mode). This causes undo to mess up the layer indicators.
I think both issues can be addressed by having the dependency graph update the used layer info as part of the armature evaluation. This will make the undo system work properly, and allows the removal of some `BKE_armature_refresh_layer_used()` from various places.
There is still the issue that there are two functions (`BKE_armature_refresh_layer_used()` and `ED_armature_edit_refresh_layer_used()`) that are both responsible for updating `bArmature::layer_used`. This is a trickier thing to solve, though, as the definition of the `EditBone` struct resides in the armature editor module. This means that blenkernel can't iterate over edit bones, but on the other hand the dependency graph shouldn't call any editor functions either. This is why I left the `ED_armature_edit_refresh_layer_used()` calls untouched.
The downside of recalculating `layer_used` from the dependency graph (at least in the way that I did it now) is that it is called every time a user moves a bone in pose mode. This frequency of updates is not necessary.
Differential Revision: https://developer.blender.org/D7709
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
The files are now split up into the following sections:
- `BKE_anim_path.h` and `anim_path.c` for path/curve functions.
- `BKE_anim_visualization.h` and `anim_visualizationanim_path.c` for
animation visualization (mostly motion paths).
- `BKE_duplilist.h` for DupliList function declarations. These were
already implemented in `object_dupli.c`, so they were rather out of
place being declared in `BKE_anim.h` in the first place.
No functional changes.
`invoke_props_dialog` and `invoke_popup` had a width and a height field. The height field was ignored as the height is determined based on the content. This change removes the field from the BPY + WM_api
Reviewed By: Campbell Barton, Jacques Lucke
Differential Revision: https://developer.blender.org/D6694
This change makes it so motion paths are using minimal possible
dependency graph which is sufficient to evaluate required motion
path targets.
Disclaimer: granularity is done on ID level, but it is possible
to go more granular if really needed.
Brings time down to 0.5 sec when updating motion path for the
Rain animation file used for benchmarks in the previous commits.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5874
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
`layer_used` runtime data, which controls the drawing of dots in the UI was not getting refreshed properly.
This used to happen in the drawing code, but was no longer working for reasons explained in:
{rB2b09062defa093a243b5fe64b099accb07b440a3}
The solution was to update each layer manually in the operators:
* ARMATURE_OT_bone_primitive_add
* ARMATURE_OT_delete
* ARMATURE_OT_dissolve
* ARMATURE_OT_fill
* ARMATURE_OT_merge
* ARMATURE_OT_separate
* ARMATURE_OT_bone_layers
* POSE_OT_bone_layers
Differential Revision: https://developer.blender.org/D5281
This was an attempt to speed up motion path calculation, which didn't
really work in real world animation files, where animators already
hide and disable all the heavy collections. Filtering approach also
doesn't allow to have multiple frames evaluated in multiple threads
easily.
Filtering also adds extra complexity on keeping the graph in a correct
and consistent state.
Fixes T64057: Blender crash when use motion paths
Having this in blenkernel caused bad level calls to bf_editors_anim,
causing tests that use 'blenkernel' to require almost all libraries.
(complicating gtest linking & causing large binaries).
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
The cause is that FOREACH_OBJECT_IN_MODE_BEGIN assumed that the active
object is in the correct mode, which is wrong in this case. It also
only considered objects of the same type as active, which had to be
replaced with an explicit type parameter.
Bring back per-viewport localview. This is based on Blender 2.79.
We have a limit of 16 different local view viewports.
We are using both the numpad /, as well as the regular /.
Missing features:
* Hack to make sure lights are always visible.
* Make rendered mode with external engines to support this as well
(probably just need to support this in the RNA iterators).
* Support over 16 viewports by taking existing viewports out of local view.
The code can use a cleanup pass in the future to unify the test to see
if an object is visible (or we can use TESTBASE in more places).
For now only `selected_pose_bones_from_active_object`, more options can
be added on demand.
Discussed this with Campbell Barton. We may need this only for selected
pose bones, time will tell.
New iterator CTX_DATA_BEGIN_FOR_ID, to restrict the loop to the specified object only.
This is not super efficient, but it should be fine for now.
I will talk to other developers. A more elegant solution would be to
have something like "active_object_selected_pose_bones" in the context.
This reverts commit 178530cc50e2fb4bd3faf4fff22392a58688bed1.
Those operators are called from the UI, which only takes into
consideration the active object for the parameters and whether to call
reset, update or calculate.
We can re-revert if needs be.
* POSE_OT_paths_clear
* POSE_OT_paths_calculate
* POSE_OT_paths_update
Despite my personal opinion on the matter, those operators were listed
as to be converted (see T54650).
They are called from the UI, where you only see the parameters for the
active object/armature.
I will commit and revert soon after, so we can quickly bring it back
once we re-visit this design.
This reverts commits:
* 2a2858b30d
* 7cf8eed5e0
Similar to ARMATURE_OT_layers_show we should keep this operator
single-object oriented. This one is a bit more tricky since we
may want to quickly see all the layers of all the armatures.
I will check with animators what is the best way to proceed here.
But overall I think it makes sense to have this only for the active
object.
This reverts commits:
* 29a281f9ef
* 3a8b56ce24
This operator shouldn't behave multi-objects. This would only work
if all the selected objects had the same logic for their layers,
which may be likely for characters, but it won't be for mixing props and
characters.
Using CTX_DATA_BEGIN_WITH_ID here.
Unlike the edit mode counter-part this operator is well served with the
macro above. ARMATURE_OT_autoside_names needs to treat mirrored bones
separately, while for pose we don't handle those cases.
Be ware that using this macro makes the code smaller, however it also
tags every single (selected) pose to update, regardless of whether we
changed the names of the bones.
In this case it is fine since we most likely renamed all the bones.
But In other cases I'm still a bit wary of using CTX_DATA_BEGIN_WITH_ID
instead of BKE_view_layer_array_from_objects_in_mode_unique_data.
To be seen in upcoming commits. Stay tuned.
