When using generative modifiers too many center dots were rendered in
the normal overlay. This patch only renders the normals of original
center dots.
Known issue: decoding the `norAndFlag` has issues on Intel GPU.
Edges were hard to see in some cases in edit-mesh vertex/face modes.
Since 804e90b42d alpha is handled differently,
update edge alpha to visually match 2.82.
Problem is that the RenderEngines will change the RenderData cfra when
rendering (when time remapping is used -- at least workbench/eevee/
gpencil do a combination of BKE_scene_frame_get() plus
RE_GetCameraWindow() which alters the RenderData cfra).
Later on in the pipeline, the Compositor will use this RenderData cfra
to determine the output file name for the FileOutput node. (In contrast
to this, the 'regular' Output will use the Scene's RenderData -- not the
Render's -- cfra [which hasnt been altered])
It is not entirely clear why RE_GetCameraWindow was setting the cfra on
the Render, but it appears to be legacy OGL rendering related and is not
needed anymore.
Removing this will keep the cfra as needed for the Compositor FileOutput
node.
This new method is only enabled if Overlay Smooth Wire is enabled.
This method gives really nice results but has some downside:
- Require a depth copy or loose the ability to write wire depth to the
depth buffer and have correct depth ordering of wires. This patch use the former, with its associated cost.
- Require some depth sampling and prevent early depth test (i.e: has
some performance impact).
- Has some relatively minor instability with geometry that are perpendicular
to the view and intersecting with other geometry.
Pros:
- Compared to a fullpass approach this is surely going to have less
performance impact and much higher quality.
- Removes the additional vertex offset. (see T74961)
- Fixes all half edges z-fighting.
{F8428014}
{F8428015}
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7233
Weight paint overlay was not working when XRay was turned on.
The Weight Paint overlay is rendered directly into the default
framebuffer with a depth equal test. This test fails as the depth won't match.
This patch will update the depth buffer in these cases.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7176
This issue became visible after fixing other TAA issues recently.
The sample count of the first frame wasn't reset resulting that the
incorrect resolve took place. This issue was already there beforehand,
it is just much clearer during the recent changes.
Now the `taa_sample will be reset when performing an animation playback
in the 3d viewport.
This patch adds support for alpha hash for hair rendering in EEvee. Here's a comparison of with alpha hashing:
{F7588610}
And no alpha hashing:
{F7588615}
Note that this needs "soft shadows" enabled, otherwise shadows will be noisy; here's a render with soft shadows disabled:
{F7588621}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5221
When the TAA is finished the screen can still be redrawn by other
operations without the TAA resets.
If that happened the TAA did add a blank sample to the result as the
scene wasn't drawn, but the was processed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7226
the settings
Caused by rBc476c36e4008.
This hooks into the existing FIXME (workaround for a missing update
tagging), reactivates the NS_VIEW3D_GPU notifier (introduced in
rB2ad3d8f158d2 -- but not going anywhere atm.) to check changes to rv3d
rflag which indicated UserStudioLight has changed. To not have updates
all the time, the rflag also needs to be cleared again (see original
rB2ad3d8f158d2).
Maniphest Tasks: T74744
Differential Revision: https://developer.blender.org/D7194
Caused by rBc476c36e4008.
This hooks into the existing FIXME (workaround for a missing update
tagging), needs to also check the clip_state (to detect
changes in DRW_STATE_CLIP_PLANES).
Maniphest Tasks: T74872
Differential Revision: https://developer.blender.org/D7193
Caused by rBc476c36e4008.
This hooks into the existing FIXME (workaround for a missing update
tagging from operators), needs to also check the shading.flag (to detect
changes in V3D_SHADING_MATCAP_FLIP_X).
Differential Revision: https://developer.blender.org/D7192
Caused by rB9516921c05bd.
Dont really see a reason to draw overlays here if overlays are disabled.
Looks like this only affects Face/Vertex mask selection drawing [which
should indeed be hidden when overlays are disabled] next to two
exceptions:
- OVERLAY_paint_vertex_cache_populate draws weights as well [D7176 /
T70807 might be related here, but to me it looks like drawing weights
here is actually not needed at all]
- OVERLAY_paint_texture_cache_populate calls
DRW_cache_mesh_surface_texpaint_get [not sure about this one, this is
also called from workbench_cache_texpaint_populate, looks like this is
not needed when overlays are hidden]
Maniphest Tasks: T74096
Differential Revision: https://developer.blender.org/D7179
When the TAA is finished the screen can still be redrawn by other
operations without the TAA needs to be reset.
If that happened the TAA did add a blank sample to the result.
This patch will add an early exit in the case TAA was finished. Note
that there are still some cases still not working. The overlay engine
can in certain circumstances draw directly into the default_fb what can
lead to render artifacts.
This patch adds ability to set up colors and size of background
(transparency) checkerboard pattern in viewport and 2d editors. No new
backgrounds, only changing colors in existing ones.
This is not the background of the viewport, it is a transparency
checkerboard that is turned on only in render mode, when the
transparency mode is on. And also in 2D-editors, (image, sequencer,
etc).
Reviewed By: Pablo Vazquez, Julian Eisel
Differential Revision: https://developer.blender.org/D6791
For In Front Objects we need to use the in front depth buffer.
This patch will use the in front depth buffer and also makes sure that
it is filled with the center pixel depth.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7216
Actually, the fade objects always fade to Black color, but this is not a good solution.
This patch fade the object to the viewport color.
Differential Revision: https://developer.blender.org/D7206
When using grease pencil in a stereo rendering the grease pencil objects are
only visible in the left eye. In the viewport it renders both.
Issue is related that `DRW_render_gpencil` only renders a single view. But
`DRW_render_to_image` renders all views. This patch puts this in a loop to
render both eyes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7154
* Space: volume density and step size in object or world space
* Step Size: override automatic step size
* Clipping: values below this are ignored for tighter volume bounds
The last two are Cycles only currently.
Ref T73201
Only the volume drawing part is really finished and exposed to the user. Hair
plugs into the existing hair rendering code and is fairly straightforward. The
pointcloud drawing is a hack using overlays rather than Eevee and workbench.
The most tricky part for volume rendering is the case where each volume grid
has a different transform, which requires an additional matrix in the shader
and non-trivial logic in Eevee volume drawing. In the common case were all the
transforms match we don't use the additional per-grid matrix in the shader.
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6955
Unreported Crash. When hidden faces are active (retopology) the depth
test could fail as the default framebuffers aren't set. This patch will
check if we are rendering a depth only and skip the clearing of the
buffer.
This fix jitter of overlay and GPencil. But I'm not sure this should
be the responsibility of the subsequent draw engines or the responsibility
of the current engine to reset the view.
Fixed memory leak that showed up after the original issue (crash) had been fixed in 93ac4709eb. The fix ensures that light cache bakes free up GPU smoke textures and the smoke domain list correctly.
This commit also removes the workaround (f3a33a9298) that disabled light cache bakes for fluid objects.
Part of the fix was to get gputexture to use an array to accomodate each
eye. This takes care of viewports showing individual Left or Right
views.
For the combined view the fix was in overlay_image.c:camera_background_images_stereo_setup.
Note 1: Referece images are still not supporting stereo.
Note 2: For painting, and getting image bindcode I'm hardcording a
single-view experience.
Note 3: Without D6922 stereo is too broken to even test this patch.
With D6922 + this patch the fullscreen modes work (anaglyph/interlace
not yet).
Differential Revision: D7143
