This patch implements the list panel system D7490 for FCurve modifiers.
The UI layouts are updated to make use of subpanels and to be consistent
with the rest of the interface, and easier to understand.
See the differential revision for screenshots.
This commit also significantly cleans up the FModifier UI code, and
improves, mainly by replacing the old button creation code is with
the newer interface API using RNA. In turn there is a bit of complexity
added because each FModifier has a separate panel.
Although reordering of FModifiers was not implemented before, we get
drag and drop basically for free here, so it is also included.
As noted in some older to do tasks, FModifiers aren't evaluated
in perfect order, which may be a point of improvement for the future.
Differential Revision: https://developer.blender.org/D7997
Split up `ANIM_deselect_anim_channels()` into
`ANIM_anim_channels_select_set()` and
`ANIM_anim_channels_select_toggle()`.
`ANIM_anim_channels_select_set()` is equivalent to the old
`ANIM_deselect_anim_channels(..., false, ACHANNEL_SETFLAG_xxx)`.
`ANIM_anim_channels_select_toggle()` is equivalent to the old
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_ADD)`.
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_CLEAR)` was
also called once. The `true` parameter suggested the "toggle" behaviour
was intended, but the `ACHANNEL_SETFLAG_CLEAR` argument prevented any
toggling. This is now replaced with `ANIM_anim_channels_select_set(ac,
ACHANNEL_SETFLAG_CLEAR)` to make this explicit.
No functional changes, just a cleanup in order to better understand how
the selection works.
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
Custom driver functions need access to the dependency graph that is
triggering the evaluation of the driver. This patch passes the
dependency graph pointer through all the animation-related calls.
Instead of passing the evaluation time to functions, the code now passes
an `AnimationEvalContext` pointer:
```
typedef struct AnimationEvalContext {
struct Depsgraph *const depsgraph;
const float eval_time;
} AnimationEvalContext;
```
These structs are read-only, meaning that the code cannot change the
evaluation time. Note that the `depsgraph` pointer itself is const, but
it points to a non-const depsgraph.
FCurves and Drivers can be evaluated at a different time than the
current scene time, for example when evaluating NLA strips. This means
that, even though the current time is stored in the dependency graph, we
need an explicit evaluation time.
There are two functions that allow creation of `AnimationEvalContext`
objects:
- `BKE_animsys_eval_context_construct(Depsgraph *depsgraph, float
eval_time)`, which creates a new context object from scratch, and
- `BKE_animsys_eval_context_construct_at(AnimationEvalContext
*anim_eval_context, float eval_time)`, which can be used to create a
`AnimationEvalContext` with the same depsgraph, but at a different
time. This makes it possible to later add fields without changing any
of the code that just want to change the eval time.
This also provides a fix for T75553, although it does require a change
to the custom driver function. The driver should call
`custom_function(depsgraph)`, and the function should use that depsgraph
instead of information from `bpy.context`.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D8047
When playing back animations a playhead is updated in all the animation editors.
The drawing of the playhead is part of the drawing of the main region
`RGN_TYPE_WINDOW` that redraws the whole region.
This change will draw the play head and window scrollers when updating the
screen. This affects the Action editor, Timeline, Graph editor, NLA editor and
Sequence editor. There is noticeable speedup when using complex animation files.
Spring 02_020_A.anim.blend fps went from 11.8 to 12.5 when showing a timeline
and a action editor on a Ryzen 1700.
* When playing back animation the markers don't jump up/down when near the
frame. This could be added back.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D8066
This code was made obsolete by the changes to the animation editor
scrubbing areas in D4654.
Differential Revision: https://developer.blender.org/D7898
This data block will be the container for simulation node trees.
It will be used for the new particle node system (T73324).
The new data block has the type `ID_SIM`.
It is not visible to users and other developers by default yet.
To enable it, activate the cmake option `WITH_NEW_SIMULATION_TYPE`.
New simulation data blocks can be created by running `bpy.data.simulations.new("name")`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7225
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
This change makes it so motion paths are using minimal possible
dependency graph which is sufficient to evaluate required motion
path targets.
Disclaimer: granularity is done on ID level, but it is possible
to go more granular if really needed.
Brings time down to 0.5 sec when updating motion path for the
Rain animation file used for benchmarks in the previous commits.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5874
Use explicit boolean flag to indicate whether flush to original data
is needed or not. Makes it possible to avoid confusion on whether an
evaluated or any depsgraph can be passed to the API.
Allows to remove depsgraph from bAnimContext as well.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5379
The main reason for this change is to allow setting the
active frame with the left mouse button, while still being
able to select e.g. keyframes with the same mouse button.
The solution is to introduce a new scrubbing region with
a specialized keymap. There are a couple of related todos,
that will be handled in separate commits.
Those are listed in D4654.
This solves T63193.
Differential Revision: https://developer.blender.org/D4654
Reviewers: brecht, billreynish
At first you could think that this refactor would not be
necessary, because `ACHANNEL_FIRST` exists already.
It contained the small y offset that all channels had.
Unfortunately, a lot of code assumed that
`ACHANNEL_FIRST = -ACHANNEL_HEIGHT`, making the
define pretty much useless. This refactor fixes that
for the action and nla editor.
As a nice side effect, this patch fixes channel box select.
Before there was always have a half-channel offset.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4783
Having this in blenkernel caused bad level calls to bf_editors_anim,
causing tests that use 'blenkernel' to require almost all libraries.
(complicating gtest linking & causing large binaries).
Instead of only `ymin` and `ymax`, `ANIM_channel_draw_widgets`
has a rectangle as input now.
This allows the caller to set a custom width for the channel.
Some space types need the extra space for the scrollbar
(drivers, graph), but the other don't have a scrollbar.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4543
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
This is a part of another which, which needs to tag owner
of f-curve for an update. But since this is too many lines
changed committing separately.
Basically, for f-curve AnimElement we are now storing ID
whih owns the f-curve.
This commit merge the full development done in greasepencil-object branch and include mainly the following features.
- New grease pencil object.
- New drawing engine.
- New grease pencil modes Draw/Sculpt/Edit and Weight Paint.
- New brushes for grease pencil.
- New modifiers for grease pencil.
- New shaders FX.
- New material system (replace old palettes and colors).
- Split of annotations (old grease pencil) and new grease pencil object.
- UI adapted to blender 2.8.
You can get more info here:
https://code.blender.org/2017/12/drawing-2d-animation-in-blender-2-8/https://code.blender.org/2018/07/grease-pencil-status-update/
This is the result of nearly two years of development and I want thanks firstly the other members of the grease pencil team: Daniel M. Lara, Matias Mendiola and Joshua Leung for their support, ideas and to keep working in the project all the time, without them this project had been impossible.
Also, I want thanks other Blender developers for their help, advices and to be there always to help me, and specially to Clément Foucault, Dalai Felinto, Pablo Vázquez and Campbell Barton.
