How to reproduce: use 1-10 to change the visible collection. If the
collection was globally invisible, it would be set to globally visible.
This was a left over from the previous collection visibility design.
Now that we have a more clear separation between temporary visibility
(i.e., layer collection visibiilty) and a global visibility setting
(i.e., collection visibility) we should keep them separated.
No major API change here, only in the outliner restriction column
variables (e.g., show_restrict_column_selectable > show_restrict_column_select).
* Get rid of _INSTANCE (introduced on b1af682001).
* Differentiate (everywhere but the API) between HIDE (temporary) and VIEWPORT (global).
* Use the expected icon for restrict viewport (same as objects and modifiers).
* selectable > select
See T61578 for discussions and mockups.
Visibility Options
==================
We are adding more granular control over restriction columns in the outliner,
exposing "indirect only" and "holdout" as options, and change the way
users enable/disable collections in a viewlayer.
We also rename the object viewport restriction to hide instance.
So the options we have are:
Collection
----------
* Render Visibility
* Instance Visibility
* Selectable
(View) Layer Collection
-----------------------
* Enable
* Holdout
* Indirect Only
* Viewport
Shortcuts
=========
Isolate Collection
------------------
* Ctr + click isolates the collection.
It turns all its parents and children "visible", and all the other
collections "invisible".
If ALL the collections were already properly set, we re-set the
collections to their default value.
Set Collection Inside Collections and Objects
---------------------------------------------
* Shift + click: Set/unset inside collections and objects.
We only set objects values as well when we are in View Layer mode and
(obviously) when the objects have a matching property.
Icons
=====
Little reminder that we will need better icons for holdout, indirect only, and
probably instanced (nothing wrong with the current, but it differs from
the proposal when it is turned off).
Also, we need to decide where do we want the modifier/bones/... icons to
be (in which column) and ideally make sure their icons match the ones we
use for collections/objects.
At the moment those are using the screen icon, which is not being used
by collections.
Reviewers: brecht, billrey
Subscribers: pablovazquez
Differential Revision: https://developer.blender.org/D4823
In 2.7x UV sculpt was a kind of sub-mode
(a toggle with it's own key-map & drawing code).
Move this to an operator that uses the tool-system,
this simplifies internal logic, especially brush selection
which now matches sculpt and other paint modes.
- Remove toggle used to enable uv sculpt.
- Expose the brush, which was already used but there was no way to
select different brushes.
- Make UV sculpt use paint paint tool slots
(using brushes how all other paint mode currently do).
- Move UV Sculpt keymap to the tools keymap.
- Remove Q to toggle UV sculpt mode,
S/P/G keys to switch tools.
Having this in blenkernel caused bad level calls to bf_editors_anim,
causing tests that use 'blenkernel' to require almost all libraries.
(complicating gtest linking & causing large binaries).
The select option in the operator was never working because we were
trying to select an object considered unselectable (since it was hidden).
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4527
The poll function accepts hidden objects, so they are not stuck in pose
mode, but the operator itself expects a valid base, which we don't have.
When called from OBJECT_OT_mode_set() it will fallback to object mode.
It is the same that happens when in Edit Mesh mode with a hidden active
object and trying to change to Vertex Painting mode.
Convention was not to but after discussion on 918941483f we agree its
best to change the convention.
Names now mostly follow RNA.
Some exceptions:
- Use 'nodetrees' instead of 'nodegroups'
since the struct is called NodeTree.
- Use 'gpencils' instead of 'grease_pencil'
since 'gpencil' is a common abbreviation in the C code.
Other exceptions:
- Leave 'wm' as it's a list of one.
- Leave 'ipo' as is for versioning.
This allows to update base flags to a proper state then object's restriction
flags are changed, without requiring to re-evaluate an entire tree of flags.
Some old unused flags are were removed by this change, and also disabling
menu items might not work the same as before. This is something we can bring
back if it's really needed (the way how flags are handled did change since
that interface code was done anyway, so code was looking weird anyway).
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4420
Now collection and objects can be either:
* Disabled for all the view layers.
* Hidden for a view layer but not necessarily for all others.
* Visible for a view layer but not necessarily for all others.
Regarding icons: Whatever we decide to use for the "Hidden for all view
layers" needs to be a toggle-like icon. Because when viewing "Scenes"
instead of "View Layer" in the outliner we should be able to edit the
collection "Hidden for all the view layers" as an on/off option.
The operators are accessible via a Visibility context menu or shortcuts:
* Ctrl + Click: Isolate collection (use shift to extend).
* Alt + Click: Disable collection.
* Shift + Click: Hide/Show collection and its children (objects and collections)
Things yet to be tackled:
* Object outliner context menu can also get a Visibility sub-menu.
* Get better icons for viewport enable/disable.
Note:
* When using emulate 3 button mouse alt+click is used for 2d panning.
In this case users have to use the operator from the menu.
See T57857 for discussion.
Patch: https://developer.blender.org/D4011
Reviewers: brecht and sergey
Thanks to the reviewers and William Reynish and Julien Kasper in
particular for the feedback.
[re-committing]
We still control this in the viewport collections visibility menu. But
now we are actually changing the visibility of the collections, not of
the objects.
If a collection is indirectly invisible (because one of its parents are
invisible) we gray it out.
Also if you click directly in the collection names, it "isolates" the
collection by hiding all collections, and showing the direct parents and
all the children of the selected collection.
Development Note:
Right now I'm excluding the hidden collections from the depsgraph.
Thus the need for tagging relations to update.
If this proves to be too slow, we can change.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
The issue was caused by dependency graph resetting particles
when evaluating copy-on-write version of object. Solved by
only doing reset from dependency graph on user edits.
Other issue was caused by modifier itself trying to compare
topology and reset particles when number of vertices or faces
changed. This isn't reliable, since topology might change even
with same number of elements. But also, since copy-on-written
object initially always have those fields zero-ed the reset
was happening on every F12.
The latter issue is solved by moving reset from modifier stack
to places where we exit edit/paint modes which might be changing
topology.
There is still weird issue of particles generated at some
weird location after tapping tab twice, but this is not a new
issue in 2.8 branch and is to be looked separately.
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
See T57857 for discussion. This reverts:
"Outliner: Do not gray out empty collections"
4521d3e707.
"Remove eye column from the outliner"
fd16b35997.
Fix/workaround issues in pose and edit mode"
6d2e2e30d5.
"Per view-layer collection visibility"
4de6a210c6.
We still control this in the viewport collections visibility menu. But
now we are actually changing the visibility of the collections, not of
the objects.
If a collection is indirectly invisible (because one of its parents are
invisible) we gray it out.
Also if you click directly in the collection names, it "isolates" the
collection by hiding all collections, and showing the direct parents and
all the children of the selected collection.
Development Note:
Right now I'm excluding the hidden collections from the depsgraph.
Thus the need for tagging relations to update.
If this proves to be too slow, we can change.
Bring back per-viewport localview. This is based on Blender 2.79.
We have a limit of 16 different local view viewports.
We are using both the numpad /, as well as the regular /.
Missing features:
* Hack to make sure lights are always visible.
* Make rendered mode with external engines to support this as well
(probably just need to support this in the RNA iterators).
* Support over 16 viewports by taking existing viewports out of local view.
The code can use a cleanup pass in the future to unify the test to see
if an object is visible (or we can use TESTBASE in more places).
Right now we have a different behaviour whether users click on the name or on
the visibility eye.
When clicking on the eye, it is a toggle. When clicking in the name, you
are isolating this collection (unless you use shift).
As for the UI I tried using separator_spacer, but it was more work than
worth. A lot of sub panels, and LEFT/RIGHT alignment work just fine.
Note: I didn't change the shortcuts, I think this is a separate decision
to be made. I just want at the moment to have the H operator to mimic
the upcoming popover.
Personally if we are to keep the 1-10 shortcuts (and they do work) I
think we should skip the excluded collections altogether.
In fact we could have an option to hide them from the outliner too.
