* Brush input mappings now have three
inheritance mode: "always", "never" and
"channel" (use channel's inheritance mode).
* Note that the UI exposes a single inherit icon,
which just toggles between "always" and
"never," to lessen user confusion.
* Brush mappings default to "never" inheritance
mode.
* Fixed wrong node update flag in bke_pbvh_insert_face_finalize
leading to disappearing parts of the mesh.
This patch adds list colors to the light theme for the spreadsheet,
which are needed for the data set region. Addresses T92492.
Differential Revision: https://developer.blender.org/D13090
#### Motivation
The View pie menu is a convenient way to access operators such as `Frame Selected` and `Frame All` which are usually mapped to `PERIOD` or `HOME` keys on the right side of most keyboard, making it hard hard to reach with the left hand.
The motivation for this patch comes from working with a 75% keyboard (no numpad). Most laptops face a similar problem.
#### Implementation
The View pie menu has been added to the following editors and sub-modes where applicable:
* Node Editor
* Video Sequencer
* Dopesheet
* Graph
* NLA
* Image
* Clip
* Outliner
More options could definitely be added to this menu for convenience, as long as it maintains the common options in the same place (Frame Selected on the left, Frame All on the right).
For positioning I went with the following layout:
{F11791186, size=full}
I've added `Zoom 1:1`to the Image Editor and the VSE Preview since there is no way to reset the zoom on keyboards without numpad (unless Emulate Numpad is turned on).
The Outliner uses `Show Active` and `Show Hierarchy` which are the closest ones to the equivalent in other editors. Should `Show Active` be renamed to `Frame Selected`?
The shortcut assigned is the same as the 3D Viewport (`ACCENT_GRAVE`).
#### Screenshots
Node Editor
{F11778387, size=full}
Dopesheet
{F11778400, size=full}
Graph
{F11778403, size=full}
Image Editor (Paint and View)
{F11791113, size=full}
Image Editor (Mask)
{F11791114, size=full}
UV Editor
{F11791119, size=full}
Clip Editor (Tracking)
{F11791137, size=full}
Clip Editor (Mask)
{F11791140, size=full}
Clip Editor (Graph)
{F11791151, size=full}
View operators are not yet implemented in Clip Editor Dopesheet mode (left a note about this in the menu poll).
Reviewed By: #user_interface, campbellbarton
Differential Revision: https://developer.blender.org/D13169
New tracking-camera presets d486ee2dbd used wrong code because I
copied them from the camera-presets. Now they set the right properties
again, the values stay the same as before.
Differential Revision: https://developer.blender.org/D13139
The name and tooltip were talking about file-lists, which exposes the
fact that the Asset Browser uses the File Browser code in the UI, which
we shouldn't do. This can confuse users.
Instead have a dedicated operator for the Asset Browser with a proper
name and tooltip.
Currently, both inactive and active tabs are using the `Region Text` theme property.
This patch makes it so active tabs use `Region Text Highlight`.
Since this check is done in other places already but was simply missing in this case, I believe this was just an oversight and not a design decision.
Top is master, bottom is this patch:
{F11520838, size=full}
This allows this kind of tab highlight, not possible before since all tabs would have white text.
{F11520873, size=full}
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D13003
Avoid blocking the UI when searching for animation channels with Ctrl+F.
Instead of showing a single text input in a blocking popup, Ctrl+F now
just focuses the search box above the channel list. It feels nicer to
use and has the niceties that come from using that textbox, like
searching per keystroke, compared to the old pop-up method.
As the behaviour of the operator has changed considerably, this also
changes the operator name from `anim.channels_find` to
`anim.channels_select_filter` and updates the keymaps.
Reviewed By: ChrisLend, sybren
Differential Revision: https://developer.blender.org/D12146
This patch makes the background grid of the node editor a grid of dots
instead of lines. This makes the background look a bit more subtle and
reduces visual complexity. The dots are meant to provide a reference
when panning and zooming. Based on the design of @pablovazquez, and
a patch originally authored by @fabian_schempp.
The "Grid Levels" controls how many levels of dots are drawn. As the
editor zooms in, the higher levels of dots fade in, making them closer
together visually. The zoom factor at which each grid starts and ends
fading in is controllable in the code, and could be tweaked further
in the future. The new default value is 7, out of a range from 0 to 9.
Differential Revision: https://developer.blender.org/D10345
This patch includes code from D9891 and D12754, so credit goes to Juanfran and Dalai.
I updated the patches to work with `master` and with the new overlay toggle.
The reason to include both changes as part of one patch is that the dimmed dashed lines work much better together with colored wires.
Theme setting for dash opacity:
{F11370574, size=full}
{F11286177, size=full, autoplay, loop}
{F11149912, size=full}
For adding the overlay I used `SpaceImageOverlay` as reference, although I'm not familiar with this code so there might be mistakes.
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12886
- Rename RNA SpaceSeq.show_strip_overlay to show_overlays
matching the 3D View, the term "strip" was misleading as this is used
for the preview as well.
- Rename various RNA overlay settings to overlay_frame
since "Frame Offset" is a specific feature, avoid having both
Editor.show_overlay and SpaceSeq.show_overlays.
- Rename Editing `over_*` -> `overlay_frame_*` in DNA,
as well as flags.
Back in Blender 2.30, the GUI project brought panels into Blender among other important visual updates.
For the first time it was possible to move the wall of buttons around. Providing a clear separation
between sections (it even allowed the grouping of panels in tabs!)
During the 2.5 redesign, the separation between panels became a line on top of each panel, and panels received
theme settings for background and header colors. The default theme used the same color for both.
In 2.8 the background color of panels was different from headers in the default theme, so the separator
line was removed. While the separator line wasn't elegant (only on top, non-themeable, hard-coded emboss effect),
it provided a sort of separation between panels.
This patch solves the panels-separation by simply adding a margin space around them (not visible in default theme yet).
Even though the margin reduces the width of the working area slightly, it makes room for the upcoming always-visible scrollbars.
Other adjustments:
* Use arrow icon instead of triangle to collapse/expand
* Use rounded corners to match the rest of the UI (editor corners, nodes, etc).
{F10953929, size=full}
Margin on panels makes use of the `style->panelouter` property that hasn't been
used in a while. Also slight tweaks to `boxspace` and `templatespace` style properties so they
are multiples of 2 and operations on them round better.
There is technically no need to update the themes for them to work, so no theme changes are included in this patch.
{F10953931, size=full}
{F10953933, size=full}
{F10953934, size=full}
{F10954003, size=full}
----
A new theme setting under Style controls the roundness of all panels (added it to Style instead of ThemeSpace because I think controlling the panel roundness per editor is a bit overkill):
{F11091561, size=full, autoplay, loop}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12814
Allow undo/redo of asset catalog edits with Ctrl+Z/Ctrl+Shift+Z. These
keys are registered in the 'screen' keymap, so that they can take
priority over the global undo/redo operators.
Updated both Blender Default and Industry Compatible keymaps.
- Use 2D cursor in the preview space using shortcuts
matching the UV editor and 3D view.
- Add Cursor tool, cursor transform.
- Support for cursor and bound-box pivot.
- Add pivot pie menu.
interface to mask expand in "selection"
mode.
Leftclick runs normal expand.
Shfit-leftclick subtracts from mask.
Pressing CTRL inverts adding/subtracting
- Support toggle/deselect/deselect_all options
(matching 3D viewport object selection).
- Support legacy selection behavior.
- Support selecting by the center in preview views (holding Ctrl).
Introduce a new keymap preference to navigate into folders by clicking on them once instead of twice.
Makes browsing folders faster albeit non-standard, so keeping this off by default for now.
Does not affect Industry Compatible or other keymaps.
It is still the possible to right-click to open context menu, hold Ctrl or Shift to select multiple items:
{F10651030, size=full}
----
Keymap preference:
{F10652759, size=full}
Part of T91537
Reviewed By: fsiddi, campbellbarton
Differential Revision: https://developer.blender.org/D12667
While the option allows tools be be activated on press instead of tweak,
this meant box-select was catching Ctrl-LMB which is also used for
add/extrude in edit mode.
Resolve this by always using tweak for selection tools,
only supporting activation on press for other tools.
Note that this doesn't impact the default configuration.
