This is a first version of an Attribute Transfer node. It only supports two
modes for mapping attributes from one geometry to another for now.
More options are planned for the future.
Ref T87421.
Differential Revision: https://developer.blender.org/D11037
This fixes T87666 and T83252.
The boolean modifier and geometry nodes can depend on the geometry
of an entire collection. Before, the modifiers had to manually create relations
to all the objects in the collection. This worked for the most part, but was
cumbersome and did not solve all issues. For example, the modifiers were not
properly updated when objects were added/removed from the referenced collection.
This commit introduces the concept of "collection geometry" in the depsgraph.
The geometry of a collection depends on the transforms and geometry of all
the objects in it. The boolean modifier and geometry nodes can now just depend
on the collection geometry instead of creating all the dependencies themselves.
Differential Revision: https://developer.blender.org/D11053
The `bisect_distance` in the mirror modifier was hard-coded to `0.001`.
This would result in some unexpected behavior like vertices close
to the mirror plane being deleted or merged.
The fix now adds a parameter to the mirror modifier to expose the
bisect distance to the user. The default is set to the previous
hard-coded value to not "change" previous files.
Ref D10201
This is a first iteration of a switch node. It can only switch between
two inputs values based on a boolean. A more sophisticated switch
node that has an integer selector will probably come later.
Currently, the geometry nodes evaluator does not support lazy evaluation
of individual inputs. Therefore, all inputs will be computed currently.
An improvement to the evaluator will be worked on separately.
Ref: T85374
Differential Revision: https://developer.blender.org/D10460
Click-drag events that weren't handled would continually be tested
for each mouse-motion event.
As well as being redundant, this added the overhead of querying
gizmos twice per motion event.
Now click-drag is only tested once when the drag threshold is reached.
This mitigates T87511, although the single drag test still causes
the snap gizmo to flicker.
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
GOP size and quality are adjusted for h264 codec.
These new values are based on result of benchmark on 9 random files:
https://docs.google.com/spreadsheets/d/1nOyUGjoVWUyhQ2y2lAd8VtFfyaY1wQNGj1krCCNbk7Y/edit?usp=sharing
Reducing quality to 50 reduces proxy filesize by about 2x on average
and has no significant impact on decoding performance.
Increasing GOP size from 2 to 10 also reduces proxy filesize 2x-3x
while scrubbing is only about 8% slower. It is still around 100FPS
with 1920x1080 media.
This is unfortunately about 50% slower than MJPEG, but this can be
improved with `fastdecode` tune applied to libx264 encoder
Quite surprisingly h264 codec presets had little influence on proxy
building performance as well as proxy filesize. So far it looks that
FFmpeg does initialize encoder in different way then Blender.
This applies mot only for presets but for tune and profile libx264
setting.
Once this issue is resolved, performance of proxies may be optimized
further.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10897
With this patch, users can define custom tooltips for the exposed
properties of their Geometry Nodes Groups.
Currently this custom tooltips are only used in the modifier panel,
but its a long term goal to use it in the node editor.
Reviewer: Hans Goudey
Differential Revision: https://developer.blender.org/D10884
This implements the changes discussed in T87134 for including switch
object funcionality in 2.93. This includes:
- Remove the switch object operator experimental option
- Remove the option for switching objects in Edit Mode.
- Rename switch_object to transfer_mode.
- Enable the operator only in sculpt mode.
- Expose the operator in the Sculpt menu with an eyedropper modal
option.
On later releases, we could revisit enabling the operator in other mode
and object types as well as its place in the UI.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D10953
This also fixes the issue that the width of the "Name" column
when viewing instances does not resize correctly.
Differential Revision: https://developer.blender.org/D10926
A `DataSource` provides columns for the spreadsheet to display.
Every column has a SpreadsheetColumnID as identifier. Columns
are not generated eagerly anymore, instead the main spreadsheet
code can request a column from a data source with an column
identifier. The column identifiers can be stored in DNA and allow us
to store persistent data per column.
On the user level the only thing that changes is that columns are
not shown in alphabetical order anymore. Instead, new columns
are always added on the left. The behavior can be changed,
however I'd prefer not to automate this too much currently. I think
we should just add operators to hide/reorder/resize columns soonish.
Differential Revision: https://developer.blender.org/D10901
Previously, the spreadsheet editor could only show data of the original
and of the final evaluated object. Now it is possible to show the data
at some intermediate stages too.
For that the mode has to be set to "Node" in the spreadsheet editor.
Furthermore, the preview of a specific node has to be activated by
clicking the new icon in the header of geometry nodes.
The exact ui of this feature might be refined in upcoming commits.
It is already very useful for debugging node groups in it's current
state though.
Differential Revision: https://developer.blender.org/D10875
The issue was that where_on_path uses a resampled curve to get the data
from the curve. This leads to disconnects between the curve the user
sees and the evaluated location data.
To fix this we simply use the actual curve data the user can see.
The older code needed a cleanup either way as there were hacks in other
parts of the code trying to work around some brokenness. This is now
fixed and we no longer need to clamp the evaluation range to 0-1 or make
helper functions to make it do what we actually want.
Reviewed By: Campbell, Sybren
Differential Revision: http://developer.blender.org/D10898
This is a minimal, information-only view currently, listing by default
all the override data-blocks, with their user-edited override
properties.
System-generated overrides (like the overrides of pointers to other
override data-blocks) can be shown through a filter option.
Finally, potential info or warning messages from (auto-)resync propcess
are also shown, as an icon + tooltip next to the affected items.
Part of D10855.
This flag is set for liboverride IDs that are detected as no longer
needed by resync process, while having been user-edited, so
auto-handling code cannot silently delete them.
Exposing those to users will be part of the new incoming Override
Outliner view.
Part of D10855.
This resulted in bad motion blur from alembic animation when imported
after rB83980506957c (because it was now OFF by default).
When imported in a version prior to rB83980506957c and saved, this was
still working fine.
Vertex interpolation option introduced in rBbab2260b59c7 was defaulting
to ON (correct) in that commit, but was lost in rB83980506957c.
Now switch this to ON by default again.
Note: if you have a file that was (incorrectly) imported with a version
after rB83980506957c you'll have to enable Vertex Interpolation option
on every MeshSequenceCache modifier by hand.
Maniphest Tasks: T86654
Differential Revision: https://developer.blender.org/D10876
Before this change, you could have the new sculpt symmetry code and the
older weight paint symmetry code active at the same time. This would
lead to users easily trashing their weigh paint data if they were not
careful when switching between modes.
Now the specific weight paint symmetry code is an exclusive toggle so
the user can't accidentally mirror strokes and vertex groups at the same
time. This also paves the way of supporting Y and Z symmetry in the
future for weight groups mirroring if we decide to add it in the future.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10426
This fixes T86440
As the CU_2D flag is set for nurbs, a Curve can have 2D nurbs mixed with 3D.
But the UI does not allow this mixing. It updates all nurbs to 2D or 3D when set.
So remove this specific flag for nurbs.
This may break old files, since 2D curves with mixed 3D are now set as 3D.
Differential Revision: https://developer.blender.org/D10738
Previously, `node_name` was rarely actually a name of a node. It is set
correctly as node name in `ED_node_tree_push`. However, later on it
was overwritten by the name of an id data block in `node_draw_space`.
Now, the node_name stays the name of the "parent" node. Whereas
display_name is the name that will be displayed in the breadcrumbs.
With this change, the `node_name` can be used to reconstruct the
actual path from the root node tree to the currently visible tree.
Differential Revision: https://developer.blender.org/D10874
After some back and forth with the GP module and some artists, this
option was deemed not that useful. The use case was considered too
obscure so we'll remove it.
It is still posible to have this functionality by using the vertex
weight modiifers or manually clamping the weights.
This simulates the effect of a honeycomb or grid placed in front of a softbox.
In practice, it works by attenuating rays coming off-angle as a function of the
provided spread angle parameter.
Setting the parameter to 180 degrees poses no restrictions to the rays, making
the light behave the same way as before this patch.
The total light power is normalized based on the spread angle, so that the
light strength remains the same.
Differential Revision: https://developer.blender.org/D10594
This was added in rB93aeb6b318a7, last changed in rB8f0a44a5d55d,
and removed in rB51b796ff1528. I assume it was a way for curves to
have split edges at corners. As far as I can tell it only ever worked
in Blender Internal, and that has been gone for years.
Another possible route here would be restoring this functionality,
but it's generally preferrable to reduce complexity in this
area of curve code than adding it back, especially in the context
of other improvements planned related to curves in geometry nodes.
Differential Revision: https://developer.blender.org/D9966
Now `ED_view3d_backbuf_depth_validate`, `ED_view3d_draw_depth` and
`ED_view3d_draw_depth_gpencil` are unified in `ED_view3d_depth_override`.
This new function replaces `ED_view3d_autodist_init`.
Also, since `ED_view3d_depth_update` depends on the render context, and
changing the context is a slow operation, that function also was removed,
and the depth buffer cached is now updated inside the new unified drawing
function when the "bool update_cache" parameter is true.
Finally `V3D_INVALID_BACKBUF` flag has been renamed and moved to
`runtime.flag`.
Differential revision: https://developer.blender.org/D10678
Display the bone axes at the head (root) of the bone by default, instead
of the tail (tip), and add a slider so that it's possible to adjust this
position.
Versioning code is in place to ensure existing files behave the same
(axes shown at tail), whereas new Armatures will be using the new
default (axes shown at head).
Reviewed By: #animation_rigging, #user_interface, Severin, Sybren
Differential Revision: https://developer.blender.org/D7685
Remove the `BONE_UNKEYED` flag. It was only written (set/cleared) but
never actually read.
Also remove `framechange_poses_clear_unkeyed()` as its only function was
to clear the `BONE_UNKEYED` flag. It wasn't used anywhere either.
The only code that used the flag was the `extract_pose_from_action()`,
which was removed in 2869ce6cfa (2009).
No functional changes.
This is functionality that isn't accessible via the user interface. The
API allows the creation and modification of an override template that
holds rules that needs to be checked when overriding the asset.
The API is setup that it cannot be changed after creation. Later on when
the system is more mature we will allow changing overrides operations.
NOTE: This is an experimental feature and should not be used in productions.
Reviewed By: mont29, sebbas
Differential Revision: https://developer.blender.org/D10792
This is an implementation of Enhanced Subpixel Morphological Antialiasing (SMAA)
The algorithm was proposed by:
Jorge Jimenez, Jose I. Echevarria, Tiago Sousa, Diego Gutierrez
This node provides only SMAA 1x mode, so the operation will be done with no spatial
multisampling nor temporal supersampling. See Patch for comparisons.
The existing AA operation seems to be used only for binary images by some other nodes.
Using SMAA for binary images needs no important parameter such as "threshold", so we
perhaps can switch the operation to SMAA, though that changes existing behavior.
Notes:
1. The program code assumes the screen coordinates are DirectX style that the
vertical direction is upside-down, so "top" and "bottom" actually represent bottom
and top, respectively.
Thanks for Habib Gahbiche (zazizizou) to polish and finalize this patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D2411
This adds a Clamp node for Geometry Nodes Attributes.
Supports both Min-Max and Range clamp modes.
Float, Vector, Color and Int data types supported.
Reviewed By: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10526
This commit adds a node with a "Map Range" operation for attributes
just like the non-attribute version of the node. However, unlike the
regular version of the node, it also supports operations on vectors.
Differential Revision: https://developer.blender.org/D10344
Move Palettes type with other weird, not-really-data ID types (like
PaintCurves and Brushes), higher in the process.
Those preset-like types may use a lot of other ID types, but should only
be used by UI-related (and Scene, for tool settings) types.
