Splits up wm_xr.c into multiple files in their own folder:
source/blender/windowmanager/xr. So this matches how the message bus and
gizmo code have their own folder and files.
This allows better structuring and should make the code scale better.
I rather do this early on than to wait until we end up with a single,
huge file.
Also improves a bit how data is prepared and updated for drawing.
NOTE: While most of the milestone 1 goals are there, a few smaller features and
improvements are still to be done.
Big picture of this milestone: Initial, OpenXR-based virtual reality support
for users and foundation for advanced use cases.
Maniphest Task: https://developer.blender.org/T71347
The tasks contains more information about this milestone.
To be clear: This is not a feature rich VR implementation, it's focused on the
initial scene inspection use case. We intentionally focused on that, further
features like controller support are part of the next milestone.
- How to use?
Instructions on how to use this are here:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/How_to_Test
These will be updated and moved to a more official place (likely the manual) soon.
Currently Windows Mixed Reality and Oculus devices are usable. Valve/HTC
headsets don't support the OpenXR standard yet and hence, do not work with this
implementation.
---------------
This is the C-side implementation of the features added for initial VR
support as per milestone 1. A "VR Scene Inspection" Add-on will be
committed separately, to expose the VR functionality in the UI. It also
adds some further features for milestone 1, namely a landmarking system
(stored view locations in the VR space)
Main additions/features:
* Support for rendering viewports to an HMD, with good performance.
* Option to sync the VR view perspective with a fully interactive,
regular 3D View (VR-Mirror).
* Option to disable positional tracking. Keeps the current position (calculated
based on the VR eye center pose) when enabled while a VR session is running.
* Some regular viewport settings for the VR view
* RNA/Python-API to query and set VR session state information.
* WM-XR: Layer tying Ghost-XR to the Blender specific APIs/data
* wmSurface API: drawable, non-window container (manages Ghost-OpenGL and GPU
context)
* DNA/RNA for management of VR session settings
* `--debug-xr` and `--debug-xr-time` commandline options
* Utility batch & config file for using the Oculus runtime on Windows.
* Most VR data is runtime only. The exception is user settings which are saved
to files (`XrSessionSettings`).
* VR support can be disabled through the `WITH_XR_OPENXR` compiler flag.
For architecture and code documentation, see
https://wiki.blender.org/wiki/Source/Interface/XR.
---------------
A few thank you's:
* A huge shoutout to Ray Molenkamp for his help during the project - it would
have not been that successful without him!
* Sebastian Koenig and Simeon Conzendorf for testing and feedback!
* The reviewers, especially Brecht Van Lommel!
* Dalai Felinto for pushing and managing me to get this done ;)
* The OpenXR working group for providing an open standard. I think we're the
first bigger application to adopt OpenXR. Congratulations to them and
ourselves :)
This project started as a Google Summer of Code 2019 project - "Core Support of
Virtual Reality Headsets through OpenXR" (see
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Some further information, including ideas for further improvements can be found
in the final GSoC report:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/Final_Report
Differential Revisions: D6193, D7098
Reviewed by: Brecht Van Lommel, Jeroen Bakker
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
event_system.c has been collecting a lot of different functionality,
move generic query/access functions into their own file,
since these are used by operators and other parts of the windowing code
and aren't part of low level event handling.
Also move public last-property API to wm_operators.c.
Previously these used a gizmo to redo the operator however this
complicated having on-screen gizmos to access tools (see T66304).
Replace this with a generic way to make an operator that only has an
execute function into a modal operator.
This is used for smooth and randomize tools.
Unlike operator gestures, this handles storing and resetting the data.
Currently this only handles edit-mode data, however it's can be
extended to other kinds of data.
Adds a check when starting blender if your platform is supported. We use a blacklist
as drivers are updated more regular then blender (stable releases).
The mechanism detects if the support level changed or has been validated by the user previously.
Changes can happen due to users updating their drivers, but also when we change the support
level in our code base.
When the user has seen the limited support level message it is saved in the user config.
It would be better to have a system specific config section, but currently not clear
what could benefit from that.
When the platform is unsupported or has limited support a dialog box will appear including a link
to our user manual describing what to do.
**Windows**
Windows uses the MessageBox that is provided by the windows kernel.
**X11**
We use a very lowlevel messagebox for X11. It is very limited in use and can be fine tuned when needed.
**SDL/APPLE**
There is no implementation for SDL or APPLE at this moment as the platform support feature targets mostly Windows users.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5955
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
- See `--log` help message for usage.
- Supports enabling categories.
- Color severity.
- Optionally logs to a file.
- Currently use to replace printf calls in wm module.
See D3120 for details.
This separate context allows two things:
- It allows viewports in multi-windows configuration.
- F12 render can use this context in a separate thread and do a non-blocking render.
The downside is that the context cannot be used while rendering so a request to refresh a viewport will lock the UI. This is something that will be adressed in the future.
Under the hood what does that mean:
- Not adding more mess with VAOs management in gawain.
- Doing depth only draw for operators / selection needs to be done in an offscreen buffer.
- The 3D cursor "autodis" operator is still reading the backbuffer so we need to copy the result to it.
- All FBOs needed by the drawmanager must to be created/destroyed with its context active.
- We cannot use batches created for UI in the DRW context and vice-versa. There is a clear separation of resources that enables the use of safe multi-threading.
Move timer and tip out of button code,
now the only requests a tooltip,
passing a creation callback to run.
Needed for manipulators in 2.8,
also helps de-duplicate logic - since we never want
multiple tool-tips showing at once.
Use dynamically generated message publish/subscribe
so buttons and manipulators update properly.
This resolves common glitches where manipulators weren't updating
as well as the UI when add-ons exposed properties which
hard coded listeners weren't checking for.
Python can also publish/scribe changes via `bpy.msgbus`.
See D2917
It has been deprecated since at least macOS 10.9 and fully removed in 10.12.
I am unsure if we should remove it only in 2.8. But you cannot build blender with it supported when using a modern xcode version anyway so I would tend towards just removing it also for 2.79 if that ever happens.
Reviewers: mont29, dfelinto, juicyfruit, brecht
Reviewed By: mont29, brecht
Subscribers: Blendify, brecht
Maniphest Tasks: T52807
Differential Revision: https://developer.blender.org/D2333
Deleting the old internal audaspace.
Major changes from there are:
- The whole library was refactored to use C++11.
- Many stability and performance improvements.
- Major Python API refactor:
- Most requested: Play self generated sounds using numpy arrays.
- For games: Sound list, random sounds and dynamic music.
- Writing sounds to files.
- Sequencing API.
- Opening sound devices, eg. Jack.
- Ability to choose different OpenAL devices in the user settings.
While this is work-in-progress from custom-manipulators branch
its stable so adding into 2.8 so we don't get too much out of sync.
- ManipulatorGroupType's are moved out of the manipulator-map and are now
global (like operators, panels etc) and added into spaces as needed.
Without this all operators that might ever use a manipulator in the 3D
view would be polling the viewport.
- Add optional get/set callbacks for non-RNA properties
Needed so re-usable manipulators can control values that
don't correspond to a single properly or need conversion.
- Fix divide by zero bug in arrow manipulator (when moving zero pixels).
Sync with custom-manipulators branch
- Use identifiers for properties.
- Property array index access.
- Remove operator from manipulators
(wasn't used and will likely add in a different way).
As with operators, the window-manager has the API for defining,
the editor can implement and register its own manipulators.
This exposes wmManipulator, keeping it opaque isn't
practical if editors and Python are to implement their own.
- Move callbacks into type struct.
- Rename render_3d_intersection -> draw_select.
- Add header for function signatures (needed for types and api headers).
- Add WM_manipulatormaptype_find
