* Cleaned up some parts of the code that were unused/could be done a bit nicer
* Added a new option for only showing the keyframes of the selected F-Curves in the Graph Editor, as another way of reducing the clutter.
* Split strips now uses the current frame as the splitting-point for selected strips if the current frame falls within in the bounds of the strip. Otherwise, the code defaults to splitting by the midpoints of the strips.
* Time-range for Graph Editor is saner now when there is only a single keyframe or none at all.
DopeSheet and Graph Editor operators were missing these, since many of these operators were written before that field was added.
NLA Editor's operators already have them.
(19863 to 21513)
Highlights of the new NLA System (and related Animation System changes):
* NLA Data is stored in AnimData alongside Action and Drivers. The NLA stack is evaluated before the Action, with the Action always overriding the results of the stack.
* NLA Data is arranged in 'Tracks', which act like PhotoShop layers. These can be muted, protected, and/or made to be played back by themselves
* Within each track, there can be multiple 'Strips'. There are 3 types of strip -> Action Clip (references some action), Transition (blends between the endpoints of two strips), and Meta (container for several strips that occur sequentially)
* FModifiers can be applied to strips, and strips can have animated influence/time controls. Playback for strips can also be backwards now!
* Playback can now go in forward and backwards directions.
* Animation Editors have been polished (unfinished features added, existing features cleaned up and made more consistent)
Notes for BuildSystem Maintainers:
* Only scons has been actively tested. Makefiles should work fine.
* MSVC ProjectFiles are broken due to the very way they work.
* CMake status unknown...
Other notes:
* Hopefully I haven't made any mistakes while doing the merge. More files than expected were showing some weird conflicts, so you may have some broken code...
* Not all old files (with NLA) data load exactly the same anymore. However, the bulk of the files out there should be ok (I hope)
I've gone through all the Animation Editor operators, making sure they send appropriate notifiers, and that these notifiers are handled.
* Added a separate category for animation-related notifiers, since the old-style ones attached to specific datatypes only was turning out to be not too feasible.
* For now, the focus has been on making sure that all Animation Editors update when there have been any potentially suitable changes at all. Later on, we can filter these more carefully to only take the ones we really need (for optimisation purposes)
* Rename BIF_transform/retopo.h to ED_transform/retopo.h
for consistency.
* Move MESH_OT_duplicate_add to editmesh_add.c.
* Remove some code from BIF_gl.h which is not needed there
anymore.
* When influence/time for NLA-strips are animated, settings in the other panels which used to control these are now greyed out to show that they won't have any impact over the result.
* NKey panel for Graph Editor now opens on Right-Hand Side, just like for NLA Editor. The small sub-region above the Channels region was too troublesome to work with.
This commit is quite experimental, and might have to be reverted, but in quite a few places, the cleanups from this commit were already necessary.
* I've left most of the image-handling functions alone, since I'm not sure how well they cope with negative indices.
* Start/End frames cannot be negative for now... any specific reasons why they should be negative?
Groups (the Action variety) can now be muted, and also be set to not be drawn in the Graph Editor. These settings get applied to all the F-Curves within the group, overriding any settings individual F-Curves might have, allowing users to quickly mute or hide groups of curves without having to go through clicking on all of them.
Also, added a flag that can be used to set the curve visiblity on AnimData level too. This will be enabled in a future commit.
* Made NLA Editing functions more aware of transitions.
- A transition can only be added between a pair of action-clips. Previous, two transitions could be added next to each other, which has undefined behaviour
- Deleting a strip with transition(s) on either side will remove the transitions too. Feedback welcome on this
- The 'type' setting for NLA-Strips is no longer editable. This was dangerous as it could result in transitions with undefined behaviour (though nothing would happen).
* Menus for adding F-Modifiers now only show relevant modifiers (i.e. 'Invalid' is not included in the list, and 'Cycles' doesn't need to be shown for NLA since we've got repeat)
* Function Generator and Noise F-Modifiers now have complete GUI's. A few settings were missed during the porting process.
* F-Modifier buttons now have their source-ID's included in the RNA Pointers used. This didn't get them animateable directly, but is a step closer.
Cleanup of scroller drawing in 2D windows.
Before:
http://download.blender.org/institute/rt11.jpg
After:
http://download.blender.org/institute/rt12.jpg
Will add 'zoom' widget circles later, as mockupped here:
http://www.reynish.com/files/blender25/fcurve_scrollbar.png
Also note the scale values are inside scroller; drawing it
on top conflicts with current frame item and markers.
Currently scroller disappear entirely when view is total.
For Joshua:
To make sliders behave nicely, the boundbox (v2d->tot) has to
be refreshed on each change. I've added it in graph drawing
now, but it could be notifier based I guess... not sure what
the correct anim api call would be. Can discuss tomorrow!
On todo:
Layout config hints so people can make scroller positions swap.
* Most of the F-Modifiers have been ported to use the layout engine + RNA for drawing their buttons now. This plays much nicer with various button-layouts.
--> As a nice demo, try adding a Noise Modifier to a NLA-strip, and change the 'size' setting to about 2 to see some effects.
* Generator and Envelope modifiers haven't been ported yet since they're quite complex (requiring more time + energy), and as such, have been made to have some temporary error prints instead. Will check on this tomorrow.
* Finished/cleaned up the RNA-wrapping of most FModifiers.
TODO's (help requested... Brecht?):
Generator modifier's UI cannot be wrapped yet using the layout engine (though I might try using the old system only), as I'm having some trouble wrapping the coefficients array for this (see rna_fcurve.c - rna_def_fmodifier_generator())
* Using the Ctrl-Shift-M hotkey, F-Modifiers can be added to all the selected strips.
* F-Modifiers can also be added/tweaked from the NLA N-Key properties. The UI now uses the same code as for the graph editor ones.
The UI drawing here is currently messed up from the NLA side, since it seems combining normal layout stuff and old-style uiBlocks doesn't seem to work too well (BUT! the buttons are at least functional).
Next up, I'll need to recode the buttons panel for the Graph Editor so that all of the drawing can be migrated over to use the new layout engine.
* F-Modifier API is now in its own file in blenkernel
* Renamed and refactored these so that they're no dependent on F-Curves, since all they really used was the fcu->modifiers list
* Added missing license blocks to a few files
* F-Modifier UI drawing/handling is now defined in a separate file so that it will be more suitable for inclusion into the NLA Editor's buttons.
* Started removing F-Curve dependence from the modifier drawing code, which wasn't strictly necessary
* Fixed F-Curve RNA wrapping to correctly use FPoints instead of the bulkier BPoints. Although nobody was likely to have encountered bugs here yet, this would almost certainly have contributed to some segfaults/data corruption along the track.
Started cleaning up FModifiers in preparation for allowing them to be used on NLA Strips.
This commit separates the 'Built-in Function' mode for the Generator modifier out into its own modifier, since it was being quite frequently used (and the RNA wrapping for this used to be quite hackish).
BACKWARDS COMPATABILITY WARNING:
Old files with FModifiers saved (i.e. old 2.5 files, but not any others) will not load correctly as a result of these changes (the wrong modifiers will be shown). I've decided that there are not likely to be many files affected by this yet, but doing this will result in a much nicer modifiers-define list in the long run.
For now, some of these polls may be a bit too restrictive, but at least we have some unified+cleaned bases to work from now (instead of relying on the generic ED_operator_area_active).
While trying to fix the mapping conversions for repeat, I came across some limitations with the current (soon to be previous) mapping methods.
Now the mapping conversions should work nicely for all places that use them.
In TweakMode, the keyframes of the Active Action are now shown (and can be edited) in NLA-mapped time, with appropriate corrections applied when editing. This works in the DopeSheet and Graph Editors :)
To do this, got rid of the old wrappers/API-methods, replacing them with new-style ones. A few methods previously (in this branch) used only for evaluation are now used for this purpose too. As the same code is used for editing + evaluation, this should now be much better to work with.
I've only done a few brief tests now, but I think I might've muddled the invert-flags on one or two cases which I'll need to check out tomorrow. So, beware that there may be some weird and critical bugs for the next few days here...
Also, added proper license headers to new NLA files.
TODO:
- testing + bugfixing due to this commit
- show range of keyframes in NLA Editor active-action line
As with the DopeSheet, the names of operators in the Graph Editor have been cleaned up, and operators have been added to menus as appropriate to show their availability.
Tweaked a few DopeSheet operator names to be more in line with the Graph Editor equivalents, and vica versa.
TODO: now, the operator poll callbacks here need checking...
* Added icon to property and enum property items. The latter is
responsible for the large number of files changed.
* For RNA functions, added PROP_RNAPTR flag to ask for a PointerRNA
as argument instead of a C pointer, instead of doing it implicitly
with the AnyType type.
* Material: properly wrap diffuse/specular param variables, and
rename some things for consistency.
* MaterialTextureSlot: added "enabled" property (ma->septex).
* Image: make animated property editable.
* Image Editor: make some things editable, notifiers, respect state.
* Context: fix issue with screen not being set as ID.
For fun, added 'sinc' (i.e. y = sin(pi*x)/(pi*x)) as a type of builtin function usable through the generator modifier. This makes a nice 'jolt' which tapers off.
In this commit, I've introduced the mechanism by which actions already referenced by strips used in the NLA can be edited (or 'tweaked'). To use, simply select a strip you wish to edit, and hit that TAB key to start tweaking that strip's action, and hit TAB again once you're done.
What happens when you enter 'tweak mode':
1) The action of the active strip temporarily becomes the 'active action' of the AnimData block. You are now able to edit this in one of the Animation Editors (DopeSheet/Action, Graph Editors) as per normal (i.e. sliding keyframes around, inserting keyframes, etc.). The 'action-line' will therefore get drawn immediately above the active track containing the active strip, so that it's clear that that's what we're editing.
2) All the NLA-tracks (and all the strips within them) that occur after the track that the active strip lived in get disabled while you're in tweakmode. This is equivalent to travelling back to an earlier state in a construction history stack.
3) The active NLA track also gets disabled while in tweakmode, since it would otherwise interfere with the correct functioning of the tweaking for the action of interest.
4) The 'real' active action (i.e. the one displaced by the active strip's action) gets put into temp storage, and will be restored after you exit tweakmode.
5) Any strips which also reference the action being tweaked will get highlighted in red shading to indicate that you may be making some changes to the action which you don't really want to make for the other users too.
Please note though, that this is only a rough prototype of this functionality, with some niceties still to come. i.e.:
* NLA-tracks after the active track should still get drawn above the 'tweaking action line', but perhaps with different appearance?
* Various tools will still need awareness of this to prevent corrupting operations from taking place. How to proceed is still undecided...
* When exiting tweak-mode, the strip the action came from still needs some form of syncing with the modified action... there are a few tricky issues here that will need to be solved
* Evaluation code doesn't totally take this into account yet...
---
Also, fixed a number of bugs with various code (notably selection, and also a few drawing bugs)
* Fix buttons jumping around when resizing and zoom. Part of this was
adding a tiny a 0.001f offset in UI_view2d_view_ortho, otherwise the
rounding is unpredictable (used to be 0.375f, but that was disabled).
* Fix various issues with zooming, panning panels. V2D_LOCKOFS_X/Y is
now taken into account in more places in the view2d code, to avoid
zooming into the center or panning out of the view.
* Remove "Free" align mode in buttons window (it's not really useful).
* View3D/Graph/Image editors now use the same PanelType system as the
buttons window, means some deprecated panel code could be removed.
* Some small visual tweaks for panels.
* View 2D Reset operator (Home key), to reset zoom and panning for panels.
* Added argument to set number buttons as sliders (slider=True for itemR).
* Ignore labels for button alignment (doesn't look right).
* Fix some use of context.main in py scripts, should get data from active
object instead.
* Fix autotexspace -> auto_texspace in py script.
* Trying a slightly different approach with curve drawing. Now curves aren't drawn darker down the list, as that approach proved to have massive contrast issues all around. However, it's not completely back to the old rainbow style, as the colours are still grouped in 3's and 4's, only that they now use hue offsets...
* Unselected curves are now drawn less opaque. However, selected curves still leave some brightness to be desired...
* Bugfix - Deselecting keyframes in graph view now deselects the curves too.
* Replaced a few duplicated enums that were also defined for some RNA properties already with the RNA ones.
* Start of cleanup of markers code in preparation for getting the rest of the editing code involving markers working again
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
