Instead of doing a lot of alpha blended drawing with jittering, use the
fragment shader to do the masking using a circle mask.
This is much simpler and requires much less resources.
Hopefully this may solve the issue we have with the Intels UHD Graphics 620
on linux.
The cause is that FOREACH_OBJECT_IN_MODE_BEGIN assumed that the active
object is in the correct mode, which is wrong in this case. It also
only considered objects of the same type as active, which had to be
replaced with an explicit type parameter.
Some space types are exposed as multiple space types,
previously the key binding to set the space type would use the last
used space-type.
Now pressing the key again cycles to the next space sub-type.
Without this, shortcut display is confusing since some space types share
a key. Keymap display will need to be updated to support this.
See T57857 for discussion. This reverts:
"Outliner: Do not gray out empty collections"
4521d3e707.
"Remove eye column from the outliner"
fd16b35997.
Fix/workaround issues in pose and edit mode"
6d2e2e30d5.
"Per view-layer collection visibility"
4de6a210c6.
We still control this in the viewport collections visibility menu. But
now we are actually changing the visibility of the collections, not of
the objects.
If a collection is indirectly invisible (because one of its parents are
invisible) we gray it out.
Also if you click directly in the collection names, it "isolates" the
collection by hiding all collections, and showing the direct parents and
all the children of the selected collection.
Development Note:
Right now I'm excluding the hidden collections from the depsgraph.
Thus the need for tagging relations to update.
If this proves to be too slow, we can change.
Implements the first changes for T54115:
* Rename "User Preferences" window to "Settings" in the UI.
We'll likely put workspace settings in there, separate from the global
user settings. System settings should become separate from user
settings in future to allow settings for specific hardware.
* Add sidebar region for navigation (scrolls independently).
Addresses space problems, so we can add more categories as needed now.
* Increase size of Settings window to compensate new navigation bar.
* Group sections into User Preferences and System.
Icons for section groups by Andrzej Ambroz. Thanks!
* Bumps subversion for file compatibility.
Screenshot: https://developer.blender.org/F5715337
I also added categories for future work, but commented them out.
We may also want to redesign contents of each section now.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D3088
Design Task: https://developer.blender.org/T54115
Bring back per-viewport localview. This is based on Blender 2.79.
We have a limit of 16 different local view viewports.
We are using both the numpad /, as well as the regular /.
Missing features:
* Hack to make sure lights are always visible.
* Make rendered mode with external engines to support this as well
(probably just need to support this in the RNA iterators).
* Support over 16 viewports by taking existing viewports out of local view.
The code can use a cleanup pass in the future to unify the test to see
if an object is visible (or we can use TESTBASE in more places).
- Replace BKE_brush_getactive_gpencil -> BKE_paint_brush
(no need for per-paint-type brush access).
- Rename TOT_GP_EDITBRUSH_TYPES -> GP_EDITBRUSH_TYPE_MAX
(avoid sharing prefix w/ unrelated constants).
- Rename instances of `GP_EditBrush_Data` to 'gp_brush'
(`Brush` is typically called 'brush').
This should be purely an implementation change,
for end users there should be no functional difference.
The entire key configuration is in one file with ~5000 lines of code.
Mostly avoiding code duplication and preserve comments and utility
functions from the C code.
It's a bit long but for searching and editing it's also convenient to
have it all in one file.
Notes:
- Actual keymap is shared by blender / blender_legacy
and stored in `keymap_data/blender_default.py`
This only generates JSON-like data to be passed into
`keyconfig_import_from_data`, allowing other presets to load and
manipulate the default keymap.
- Each preset defines 'keyconfig_data'
which can be shared between presets.
- Some of the utility functions for generating keymap items still
need to be ported over to Python.
- Some keymap items can be made into loops (marked as TODO).
See: D3907
That kind of implicit includes should really only be done when totally,
absolutely necessary, and ideally only with rather simple 'second-level'
headers.
Otherwise not being explicit with includes always end up biting in
unexpected ways...
Cursor motion was often causing redraws.
Distance to scrollbars that don't exist in hidden regions
caused redraws (for alpha fading).
Check if scrollbars are used before calculating fade.
* Area and Workspace duplicate.
* Toggle Area Fullscreen
* Operator Search
* Workspace reorder to front/back (arrows help to know which direction means front/back)
This will probably be a temporary solution to fill empty space, for until we
have a search button there. Hence, I made this optional using a compile flag.
Moves the Properties editor context switching to a vertical tabs region.
Design Task: T54951
Differential Revison: D3840
The tabs are regular widgets, unlike the 'old' toolshelf tabs. This means they
give mouse hover feedback, have tooltips, support the right-click menu, etc.
Also, when vertical screen space gets tight, the tabs can be scrolled, they
don't shrink like the toolshelf ones.
The tab region is slightly larger than the header. The tabs are scaled up
accordingly. This makes them nicely readable.
The header is quite empty now. As shown in T54951, we wanted to have a search
button there. This should be added next.
Implementation Notes:
* Added a new region type, RGN_TYPE_NAVIGATION.
* Having the tabs in a separate region allows scrolling of the tab-bar, unlike
the toolshelf tabs. We might want to remove the scrollbars though.
* Added a new region flag RGN_FLAG_PREFSIZE_OR_HIDDEN, to ensure the tab region
is either hidden or has a fixed size.
* Added some additional flags to support fine-tuning the layout in panel and
layout code.
* Bumps subversion.
With the new automatic handle algorithm, it is possible to do a lot
of the animation via keyframes without touching the curves. It is
however necessary to change the keyframe interpolation and handle
types in certain cases. Currently the dopesheet/action editor
allows changing the types, but does not show them in any way.
To fix, add a new menu option to display this information. For handle
type, it is represented using the shape of the key icons: diamond for
Free, clipped diamond for Aligned, square for Vector, circle for Auto
Clamp, and cirle with dot for Automatic.
Non-bezier interpolation is a property of intervals between keys,
so it is marked by drawing lines, similar to holds. In this initial
version, only the fact of non-bezier interpolation is displayed,
without distinguishing types. For summaries, the line is drawn at
half alpha if not all curves in the group are non-bezier.
In addition, it is sometimes helpful to know the general direction
of change of the curve, and which keys are extremes. This commit
also adds an option to highlight extremes, based on comparing the
keyed values with adjacent keys. Half-intensity display is used
for overshot bezier extremes, or non-uniform summaries.
Reviewers: brecht, aligorith, billreynish
Differential Revision: https://developer.blender.org/D3788
When a .blend file is dropped into Blender a small menu opens.
In that menu the user can choose between three options: Open, Link and Append.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3801
For now only `selected_pose_bones_from_active_object`, more options can
be added on demand.
Discussed this with Campbell Barton. We may need this only for selected
pose bones, time will tell.
Computation of hold blocks was done by storing ranges (with start and
an end, and likely overlapping) in a tree keyed only by the block start.
This cannot work well, and there even were comments that it is not
reliable in complex cases.
A much better way to deal with it is to split all ranges so they don't
overlap. The most thorough way of doing this is to split at all and every
known keyframe, and in this case the data can actually be stored in the
key column data structures, avoiding the need for a second tree.
In practice, splitting requires a pass to copy this data to newly added
keys, and the necessity to loop over all keyframes in the range being
added. Both are linear and don't add excess algorithmic complexity.
The new implementation also calls BLI_dlrbTree_linkedlist_sync for
its own needs, so the users of the *_to_keylist functions don't have
to do it themselves anymore.
Differential Revision: https://developer.blender.org/D3790
