This new option applies the opacity using the strength of the stroke instead to use the alpha channel of the material.
Tested in greasepencil-object branch
{F7712796}
The vertex group filter has been removed because this filter is not logic in Material mode and must be valid only in Strength mode.
{F7713147}
Reviewers: pepeland, mendio
Reviewed By: mendio
Differential Revision: https://developer.blender.org/D5650
For reasons similar to drivers, it should be possible to set an
explicit Euler rotation order in constraints that use Euler angles.
The Transform constraint in a way approaches drivers in its use,
in that it effectively alters channels using values of other
channels after applying a fixed form mathematical expression.
For this reason, instead of just specifying the euler order for
its inputs, it uses the same enum as driver variables. However
Quaternion components are converted to a weighted pseudo-angle
representation as the rest of the constraint UI expects angles.
The meaning of the euler angles completely depends on the rotation
order. Currently the rotation order is taken from the target of the
driver variable, which somewhat makes sense if it uses euler, but if
it's quaternion, then the order is always set to XYZ.
Add a new option for the rotation channels of the Transform Channel
driver variables that defaults to the old behavior, but allows setting
an explicit rotation order.
This commit includes the new brush cursor, active vertex updates and the normal radius brush property for all sculpt brushes.
-The new brush cursor previews the real stroke radius over the mesh and the sampled sculpt normal.
-The active vertex is used in sculpt tools and brushes as a starting point for an operation, similar to a preselection. It is also mirrored following the enabled symmetry options to preview the stroke symmetry.
-The normal radius brush property limits the radius that is going to be used to sample the sculpt normal and area center. It controls how closely the cursor follows the surface and it improves the behavior of most brushes, making them suitable for hard surface sculpting.
Reviewed By: campbellbarton, brecht
Differential Revision: https://developer.blender.org/D3594
Uniform scale is superior to non-uniform scale in that it works with
parenting without causing shear. Thus it is a valid desire in some
cases to turn arbitrary scale into guaranteed uniform scale.
Implementing this in the Copy Scale constraint allows one for instance
to 'inherit scale as uniform' by disabling Inherit Scale, and using
Copy Scale from parent with Offset and Make Uniform.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5614
NodeTree structures of materials and some other data blocks are
effectively node group datablock objects that are contained inside
the parent block. Thus, direct references to them are only valid
while blender is running, and are lost on save.
Fix Copy As New Driver to create a reference that goes through
the owner datablock, by adding a new ID flag to mark private
pseudo-datablocks.
Also fix functions that return full paths to structures and
properties, e.g. used in python tooltips. Functions for paths
from ID to struct or property can't be changed because of
Animation Data related code.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D5559
New brush option to calculate the distance to generate a new brush step using the cursor position over the mesh instead of the screen coordinates. This avoids artifacts when sculpting across curved surfaces.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5432
Show Edges option in the UV editor does not do anything. Only RNA/DNA
code could be found, so it is save to be removed.
Differential Revision: https://developer.blender.org/D5446
Before, the evaluation of modifers were done in draw manager. The reason of the old design was grease pencil was designed before depsgraph was in place.
This commit moves this logic to depsgraph to follow general design and reduce Draw Manager complexity. Also, this is required in order to use modifiers in Edit modes.
Really, there is nothing really new in the creation of derived data, only the logic has been moved to depsgraph, but the main logic is the same. In order to get a reference to the original stroke and points, a pointer is added to Runtime data as part of the evaluated data. These pointers allow to know and use the original data.
As the modifiers now are evaluated in Depsgraph, the evaluated stroke is usable in Edit modes, so now it's possible to work with the evaluated version instead to use a "ghost" of the final image over the original geometry as work today.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5470
This option was doing nothing in Blender 2.80.
I don't really see a reason for keeping it around.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5552
This reverts commits 54fd8176d7, 4c5becb6b1 and 8f578150e.
Those kind of commits must be reviewed and approved by project owners.
That one:
* Broke Collada building by not properly updating all calls to modified
function.
* Broke *whole* ID management by not properly updating library_query.c.
And in general, I am strongly against backward ID pointers, those are
*always* a serious PITA for ID management. Sometimes they cannot be
avoided, but in general other ways to get that kind of info should be
investigated first.
NodeTree structures of materials and some other data blocks are
effectively node group data block objects that are contained inside
the parent block. Thus, direct references to them are only valid
while blender is running, and are lost on save.
Fix Copy As New Driver to create a reference that goes through
the owner data block, by adding a new runtime field to bNodeTree.
Previously there was already "draw_shape" property,
but it was doing nothing. This commit renames the
property to "display_shape". Furthermore, different
shapes like SQUARE and DIAMOND are supported now.
Currently, the shapes are drawn using the shader that also
draws keyframes. In the future we might want to separate
this.
The new shapes are not used anywhere yet, but they can
be used by addon developers and will probably be useful
when we want to support different kinds node systems later.
For example, different shapes can be used to distinguish
between data and control flow.
Differential Revision: https://developer.blender.org/D2829
Add Multiply, Divide, Project, Reflect, Distance, Length, Scale, Snap,
Floor, Ceil, Modulo, Fraction, Absolute, Minimum, and Maximum operators
to the Vector Math node. The Value output has been removed from operators
whose output is a vector, and the other way around. All of those removals
has been handled properly in versioning code.
The patch doesn't include tests for the new operators. Tests will be added
in a later patch.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5523
This commit adds a new filter by material using the name and not only the index.
Reviewers: antoniov, pepeland
Differential Revision: https://developer.blender.org/D5544
Part of T66420
Option for snapping to the nearest point of a reference coordinate.
The patch also adds Edge Center and Perpendicular snaps to the ruler.
{F7675906}
Reviewers: campbellbarton, brecht
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D5543
- Implement dynamic inputs. The second input is now unavailable in single
operand math operators.
- Reimplemenet the clamp option using graph expansion for Cycles.
- Clean up code and unify naming between Blender and Cycles.
- Remove unused code.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5481
Actually, the selection mode is not visible in Sculpt mode when mask is enabled, but still is used.
Also, the mode is shared between Edit mode and Sculpt mode and for meshes the selector is by mode.
This commit splits the select mode in different properties and show the selector in Sculpt mode to define the Select mode. Also, the Select Mask button has been removed and now the Select Mode buttons work equal to Meshes where the select buttons are the mask enable too.
Fixed some old code not valid detected during these changes.
Differential Revision: https://developer.blender.org/D5500
Adds a keyboard walk navigation and selection operator to the
outliner. Up and down arrow keys walk up and down the list of
elements, and left and right will open and close elements if
the elements are closed or opened respectively. Holding shift
while walking up and down the tree expands the selection.
Holding shift while clicking or pressing left and right arrows
will expand or collapse all children elements recursively.
Pressing enter to openclose the hovered element is removed.
Also allows click+drag for openclose of element subtrees.
This moves openclose toggling to the openclose operator to
remove duplicate code. The outliner tree building is tweaked
slightly to set the proper parents in scene display mode for walk
select to walk to parents without errors.
Adds an invisible object filter in the outliner to show hidden
objects. This is useful to quickly locate hidden items in a large outliner
tree and easily toggle visibilty back on. Invisible refers to an object
being hidden, or viewport visibility restricted.
Adds a toggle to the filter menu for outliner synced selection. Enabled
by default, this ensures selection is synced between objects, bones, and
sequences. An active outliner element theme color is added to indicate
which element is active.
Synced selection is controlled on the operator level. Each operator
that modifies selection for objects, bones, sequences, or outliner
elements needs to call the respective ED_outliner_select_sync_from..
function to tag outliners to be synced.
Syncing is done lazily on outliner draw.
This checkbox replaces the "Disabled" and "Enabled" entries in the
filter drop-down. As a result, it now takes a single click to limit the
shown entries to enabled add-ons only. This is also an actual flag in
the preferences, and thus its state is saved between runs on Blender (in
contrast to the filter, which is always reset to "All").
Reviewed by: brecht, billreynish
The voxel remesher introduces a new workflow for sculpting without any of the limitations of Dyntopo (no geometry errors or performance penalty when blocking shapes). It is also useful for simulations and 3D printing.
This commit includes:
- Voxel remesh operator, voxel size mesh property and general remesh flags.
- Paint mask reprojection.
- Geometry undo/redo for sculpt mode. This should support remesh operations as well as future tools that modify the topology of the sculpt in a single step, like trimming tools or mesh insert brushes.
- UI changes in the sculpt topbar and the mesh properties pannel.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5407
This commit also provide a compatibility code that will convert old
materials using Additive or Multiply Blend mode to their node equivalent.
This conversion is only done on outputs that are enabled for eevee.
i18n code does not work from threads on some plaforms, so it is disabled
in Blender when called from non-main thread.
Means that we have to go to a slightly different approach, with dirty
tag and generating string on request for UI.
Note: Also had to update the `info` string size, to fit with expensive
asiatic scripts in utf-8... Using mem for that kind of runtime data is
not really nice, but for now it will have to do.
Change the default drawing method of vector sockets to use a column layout.
This allows more interactive use of nodes and avoids the one or two clicks
needed to edit vector sockets in the old default component layout.
Developers may still use the component layout by flaging the socket with the
`SOCK_COMPACT` socket flag. For now, we choose to draw the SSS scale vector
of the Principled and SSS nodes in a compact form because they don't require
much interactivity.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5458
Before, the length variable was reused for Sample and Merge Simplify. Now, the Merge has its own distance property and variable in the modifier struct.
This option uses the same logic of the merge by distance but as an option of modifier to allow dynamic merge.
This option will be very useful for LANPR generated strokes.
