In a recent refactor we splitted the lines extractor in `extract_lines` and
`extract_lines_loose`. When an object is in edit mode the extracted
lines loose also had to include a dummy bmesh edge iterator. This change
adds this missing dummy method.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D6499
Blender crashes when selecting a marker in the 3d viewport that is from the non active scene camera. This patch will solve this crash, but introduced a new scenario that isn't thought out. In the new scenario it is still hard to select a marker via the 3d viewport.
I would expect that when selecting a marker in this case would select the camera where the marker belongs to and select the marker that is under the mouse button.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D6360
In Blender 2.81 Look Dev was renamed to Material Preview
also the old look dev HDRIs could also be used in both
cycles and eevee. A more generic name was need.
As shown in the T68805, non-sized bones (such as the resulting extruded
bone) have no direction or orientation.
This can be bad for operators like `extrude_move` since the user might
want the resulting bone to be aligned with the bone that originated it.
The solution here is to get the parent bone orientation in the
transform operator if the bone has no size.
Differential Revision: https://developer.blender.org/D6486
Rewrite the checks for determining if the solution is actually within
the triangle to fix stability issues when the correct solution is on
an edge, and step is very small, i.e. the solution is already very
close. Also, comment more clearly what is happening geometrically.
This should fix problems when vertices that should project exactly
onto an edge actually miss, resulting in weird spikes. This made
Target Normal Project unusable for the voxel remesher.
Currently the action channels are applied after the existing
transformation, as if the action controlled a child of the
bone. This is not very natural, but more importantly, the
transform tools are not designed to work conveniently with an
additional 'pseudo-child' transformation, resulting in effects
like an unexpected pivot location.
Implementing a Before mode that integrates the action channels
as if applied to a parent allows using the special transform
tool code intended for dealing with such constraints.
Note that in either mode, Action constraints should be added
in reverse order, putting a new constraint before the existing
ones that the Action was keyframed to work together.
In order to implement the option, extract a utility from
the Copy Transform constraint code for combining transforms
with special anti-shear scale handling that matches the
Aligned Inherit Scale mode.
The Before mode also requires switching the constraint to
the Local owner space, while the After mode can still use the
World space for efficiency as before. Since the constraint
doesn't have an Owner space option in the UI, this has to be
handled in an RNA setter.
For full backward compatibility, the original simple matrix
multiplication mode is preserved as the third option, but it
is not recommended due to creating shear.
Differential Revision: https://developer.blender.org/D6297
- Object/pose checks were performed in same loop,
so selected pose bones were moved instead of the object.
- Snap selected to cursor/active incorrectly used unique object-data.
This was disabled as part of b66ae8259e which disabled
animation for display mode and other cases where it doesn't make sense.
However it's useful to be able to overwrite frame ranges,
adding this back.
This adds UDIM support to e.g. the Displacement modifier.
The implementation is straightforward: If the image is tiled, lookup the
tile based on UVs and shift the UVs into the tile's coordinates.
Actually, to purge orphans datablock you need go to Outliner, enable Orphan mode and press Purge button (that sometimes is out of the view because the window is too narrow).
To have this option hidden make very difficult to users use and understand what means orphan data, so this patch just adds a new Clean Up menu to File menu with this option. This menu could be used in the future for more clean up options. To have a general Clean Up menu is common used in other softwares.
Reviewed By: billreynish, mont29
Differential Revision: https://developer.blender.org/D6445
This commit affects `id_sort_by_name()` and `check_for_dupid()` helper:
* Add a new parameter, `ID *id_sorting_hint`, to `id_sort_by_name()`,
and when non-NULL, check if we can insert `id` immediately before or
after it. This can dramatically reduce time spent in that function.
* Use loop over whole list in `check_for_dupid()` to also define the
likely ID pointer that will be neighbor with our new one.
This gives another decent speedup to all massive addition cases:
| Number and type of names of IDs | old code | new code | speed improvement |
| -------------------------------- | -------- | -------- | ----------------- |
| 40K, mixed (14k rand, 26k const) | 39s | 33s | 18% |
| 40K, fully random | 51s | 42s | 21% |
| 40K, fully constant | 40s | 34s | 18% |
Combined with the previous commits, this makes massive addition of IDs more
than twice as fast as previously.
This commit affects `check_for_dupid()` helper:
* Add a special, quicker code path dedicated to sequential addition of a
large number of IDs using the same base name.
This gives a significant speedup to adding 'randomly'-named IDs:
| Number and type of names of IDs | old code | new code | speed improvement |
| -------------------------------- | -------- | -------- | ----------------- |
| 40K, mixed (14k rand, 26k const) | 49s | 39s | 26% |
| 40K, fully random | 51s | 51s | 0% |
| 40K, fully constant | 71s | 40s | 78% |
Note that 'random' names give no improvement as expected, since this new code
path will never be used in such cases.
This commit affects `check_for_dupid()` helper:
* Further simplify the general logic of the code (we now typically only do
one loop over the list of data-blocks, instead of two).
This gives a significant speedup to adding 'randomly'-named IDs:
| Number and type of names of IDs | old code | new code | speed improvement |
| -------------------------------- | -------- | -------- | ----------------- |
| 40K, mixed (14k rand, 26k const) | 62s | 49s | 27% |
| 40K, fully random | 76s | 51s | 49% |
| 40K, fully constant | 77s | 71s | 8% |
Note that 'constant' names give little improvement, as in that case the first
loop over the list of IDs (checking whether base given name was already in use)
was aborting very quickly.
This commit affects `check_for_dupid()` helper:
* Fix (serious though rare) bug where several IDs could end up with
exact same name (happened with over 10k IDs with same very long name).
* Fix (relatively harmless) func reporting it did not change the given
name when it actually had truncated it.
* Sanitize handling of supported min/max number suffixes (it now handles
between 1 and 1 billion, which should be way more than enough).
* Sanitize general logic to (hopefully!) make it easier to follow.
* General cleanup (naming, comments, variables scope, remove dead code, etc.).
Note that general performances here remain the same, there is no
measurable gain or loss. Algorithm remain also the same globally.
Attempt to use a GHash to speed up checks of used names proved to be
much worse, just building the GHash would already take as much time as
the whole process with current code...
This alone can make e.g. adding 40k IDs with default name (i.e. 'fully
constant' case in table below) about 15-20% faster:
| Number and type of names of IDs | old code | new code | speed improvement |
| -------------------------------- | -------- | -------- | ----------------- |
| 40K, mixed (14k rand, 26k const) | 75s | 62s | 21% |
| 40K, fully random | 90s | 76s | 18% |
| 40K, fully constant | 94s | 77s | 22% |
Idea is to use a first pass, where we just check one item every nth ones,
until we have found the chunk in which we want to insert the new item,
then do a basic linear comparison with all items in that chunk as before.
Also, list is now walked backward, as in most common 'massive insertion'
cases new ID's names have higher number, hence ends up towards the end of
the list.
This new sorting function can be between a few percents and 50% quicker than
original code, depending on various factors (like length of common parts of
ID names, whether new IDs should be added towards the end or not, how high
in numbering we are, etc.).
Note: another, full bisecting approach was also tried, which gives a massive
reduction of comparisons (from n items to log2(n)), but it only gave minor
improvements of speed from original fully linear code, while adding a fair
amount of complexity to the logic. Only case it was shining was the unlikely
'very long, almost similar ID names' case (since `strcasecmp()` is rather
costly then).
Since rB6bc6d016c5e7, outliner was not opening back up from the found
active element (but only its ID instead -- all occurances of this ID in
any collection).
Now expand from the active element as well (but only do this for the
first occurance of the corresponding ID)
Maniphest Tasks: T71844
Differential Revision: https://developer.blender.org/D6329
updates in particle editmode
Particles themselves were cleared correctly but this was not tagging
batch cache dirty.
Might move this to a utility function later [since it is used in more
places], but that is for after going over some more reports...
Reviewers: sergey
Differential Revision: https://developer.blender.org/D5925
are visible
Not freeing PTCacheEdit and tagging batch cache dirty on undo will have
a couple of consequences. This patch fixes:
- crash deleting a particle, then undo
- basically any edit (combing, ...), then undo will leave child hairs
untouched
- adding hairs (through mirror, add tool, ...), then undo will leave
'orphaned' child hairs
See also D5755 for a related discussion
Fixes the crasher mentioned in T69000
Might move this to a utility function later [since it is used in more
places], but that is for after going over some more reports...
Reviewers: sergey
Differential Revision: https://developer.blender.org/D5912
This feature makes it possible to do a viewport render (a.k.a.
playblast) by only rendering those frames on which the selected objects
have a keyframe.
The frames to render are stored in a `BLI_bitmap`, which has a bit for
each frame set to 0 (skip) or 1 (render). An alternative approach would
be to construct a set of all keyframes to render, but that would make
both constructing the list and looking up frames in the list more
complex.
The only thing this feature does is skip OpenGL rendering of a frame. As
a result, 'skipped' frames are still included in the output, but just
use the render result of the last-rendered frame. This is exactly what's
described in T72229.
Differential Revision: https://developer.blender.org/D6443
Reviewed By: zeddb
Design task: T72229
Make indices accommodate into the measures of edgelength and edgeangle
so this results in a nice stack of up to three rows.
Maniphest Tasks: T72128
Differential Revision: https://developer.blender.org/D6357
Since BM_uv_vert_map_create would return NULL for an empty mesh, code
would then return from uv_select_linked_multi [where it should just skip
and continue instead...]
Maniphest Tasks: T63407
Differential Revision: https://developer.blender.org/D6441
The ratio for area stretching was packed into an unsigned int, but could
contain negative numbers. This flipped the negative numbers to high
positive numbers and rendered the wrong color in the stretching overlay.
I can remember during {T63755} I had to flip the sign to get the
correct result, but couldn't find out why that was needed. Now I know.
Reviewed By: fclem, mano-wii
Differential Revision: https://developer.blender.org/D6440
