Disabled data access in particle RNA.

Only the general attribute descriptions and state instance can be
accessed from plain bpy now. For detailed data read/write the bparticles
module has to be used.

This was forced by a change to collection iterators, which essentially
makes them unsuitable for anything other than ListBase and arrays
(state attributes and particle data in this case). It may be possible
to reeanble this later, but generally bparticles is the better approach.

.gitignore

@@ -26,9 +26,3 @@ Desktop.ini
 # local patches
 /*.patch
 /*.diff
-
-# in-source doc-gen
-/doc/doxygen/html/
-/doc/python_api/sphinx-in-tmp/
-/doc/python_api/sphinx-in/
-/doc/python_api/sphinx-out/

GNUmakefile

@@ -52,10 +52,6 @@ ifneq "$(findstring debug, $(MAKECMDGOALS))" ""
 	BUILD_DIR:=$(BUILD_DIR)_debug
 	BUILD_TYPE:=Debug
 endif
-ifneq "$(findstring full, $(MAKECMDGOALS))" ""
-	BUILD_DIR:=$(BUILD_DIR)_full
-	BUILD_CMAKE_ARGS:=$(BUILD_CMAKE_ARGS) -C"$(BLENDER_DIR)/build_files/cmake/config/blender_full.cmake"
-endif
 ifneq "$(findstring lite, $(MAKECMDGOALS))" ""
 	BUILD_DIR:=$(BUILD_DIR)_lite
 	BUILD_CMAKE_ARGS:=$(BUILD_CMAKE_ARGS) -C"$(BLENDER_DIR)/build_files/cmake/config/blender_lite.cmake"
@@ -65,7 +61,7 @@ ifneq "$(findstring cycles, $(MAKECMDGOALS))" ""
 	BUILD_CMAKE_ARGS:=$(BUILD_CMAKE_ARGS) -C"$(BLENDER_DIR)/build_files/cmake/config/cycles_standalone.cmake"
 endif
 ifneq "$(findstring headless, $(MAKECMDGOALS))" ""
-	BUILD_DIR:=$(BUILD_DIR)_headless
+	BUILD_DIR:=$(BUILD_DIR)_bpy
 	BUILD_CMAKE_ARGS:=$(BUILD_CMAKE_ARGS) -C"$(BLENDER_DIR)/build_files/cmake/config/blender_headless.cmake"
 endif
 ifneq "$(findstring bpy, $(MAKECMDGOALS))" ""
@@ -113,7 +109,7 @@ endif
 
 # -----------------------------------------------------------------------------
 # Build Blender
-all: FORCE
+all:
 	@echo
 	@echo Configuring Blender ...
 
@@ -133,7 +129,6 @@ all: FORCE
 	@echo
 
 debug: all
-full: all
 lite: all
 cycles: all
 headless: all
@@ -142,17 +137,16 @@ bpy: all
 
 # -----------------------------------------------------------------------------
 # Configuration (save some cd'ing around)
-config: FORCE
+config:
 	$(CMAKE_CONFIG_TOOL) "$(BUILD_DIR)"
 
 
 # -----------------------------------------------------------------------------
 # Help for build targets
-help: FORCE
+help:
 	@echo ""
 	@echo "Convenience targets provided for building blender, (multiple at once can be used)"
 	@echo "  * debug     - build a debug binary"
-	@echo "  * full      - enable all supported dependencies & options"
 	@echo "  * lite      - disable non essential features for a smaller binary and faster build"
 	@echo "  * headless  - build without an interface (renderfarm or server automation)"
 	@echo "  * cycles    - build Cycles standalone only, without Blender"
@@ -171,7 +165,7 @@ help: FORCE
 	@echo ""
 	@echo "Package Targets"
 	@echo "  * package_debian  - build a debian package"
-	@echo "  * package_pacman  - build an arch linux pacman package"
+	@echo "  * package_pacman  - build an arch linux pacmanpackage"
 	@echo "  * package_archive - build an archive package"
 	@echo ""
 	@echo "Testing Targets (not associated with building blender)"
@@ -198,8 +192,7 @@ help: FORCE
 	@echo ""
 	@echo "Utilities (not associated with building blender)"
 	@echo "  * icons    - updates PNG icons from SVG files."
-	@echo "  * tgz      - create a compressed archive of the source code."
-	@echo "  * update   - updates git and all submodules"
+	@echo "  * tbz      - create a compressed svn export 'blender_archive.tar.bz2'"
 	@echo ""
 	@echo "Documentation Targets (not associated with building blender)"
 	@echo "  * doc_py   - generate sphinx python api docs"
@@ -207,20 +200,17 @@ help: FORCE
 	@echo "  * doc_dna  - generate blender file format reference"
 	@echo "  * doc_man  - generate manpage"
 	@echo ""
-	@echo "Information"
-	@echo "  * help          - this help message"
-	@echo "  * help_features - show a list of optional features when building"
 
 # -----------------------------------------------------------------------------
 # Packages
 #
-package_debian: FORCE
+package_debian:
 	cd build_files/package_spec ; DEB_BUILD_OPTIONS="parallel=$(NPROCS)" sh ./build_debian.sh
 
-package_pacman: FORCE
-	cd build_files/package_spec/pacman ; MAKEFLAGS="-j$(NPROCS)" makepkg
+package_pacman:
+	cd build_files/package_spec/pacman ; MAKEFLAGS="-j$(NPROCS)" makepkg --asroot
 
-package_archive: FORCE
+package_archive:
 	make -C "$(BUILD_DIR)" -s package_archive
 	@echo archive in "$(BUILD_DIR)/release"
 
@@ -228,74 +218,58 @@ package_archive: FORCE
 # -----------------------------------------------------------------------------
 # Tests
 #
-test: FORCE
+test:
 	cd $(BUILD_DIR) ; ctest . --output-on-failure
 
 # run pep8 check check on scripts we distribute.
-test_pep8: FORCE
+test_pep8:
 	python3 tests/python/pep8.py > test_pep8.log 2>&1
 	@echo "written: test_pep8.log"
 
 # run some checks on our cmakefiles.
-test_cmake: FORCE
+test_cmake:
 	python3 build_files/cmake/cmake_consistency_check.py > test_cmake_consistency.log 2>&1
 	@echo "written: test_cmake_consistency.log"
 
 # run deprecation tests, see if we have anything to remove.
-test_deprecated: FORCE
+test_deprecated:
 	python3 tests/check_deprecated.py
 
-test_style_c: FORCE
+test_style_c:
 	# run our own checks on C/C++ style
-	PYTHONIOENCODING=utf_8 python3 \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
-	    "$(BLENDER_DIR)/source/blender" \
-	    "$(BLENDER_DIR)/source/creator" \
-	    --no-length-check
+	PYTHONIOENCODING=utf_8 python3 "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" "$(BLENDER_DIR)/source/blender" "$(BLENDER_DIR)/source/creator" --no-length-check
 
-test_style_c_qtc: FORCE
+test_style_c_qtc:
 	# run our own checks on C/C++ style
 	USE_QTC_TASK=1 \
-	PYTHONIOENCODING=utf_8 python3 \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
-	    "$(BLENDER_DIR)/source/blender" \
-	    "$(BLENDER_DIR)/source/creator" \
-	    --no-length-check \
-	    > \
-	    "$(BLENDER_DIR)/test_style.tasks"
+	PYTHONIOENCODING=utf_8 python3 "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" "$(BLENDER_DIR)/source/blender" "$(BLENDER_DIR)/source/creator" --no-length-check > \
+	test_style.tasks
 	@echo "written: test_style.tasks"
 
 
-test_style_osl: FORCE
+test_style_osl:
 	# run our own checks on C/C++ style
-	PYTHONIOENCODING=utf_8 python3 \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
-	    "$(BLENDER_DIR)/intern/cycles/kernel/shaders" \
-	    "$(BLENDER_DIR)/release/scripts/templates_osl"
+	PYTHONIOENCODING=utf_8 python3 "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" "$(BLENDER_DIR)/intern/cycles/kernel/shaders" "$(BLENDER_DIR)/release/scripts/templates_osl"
 
 
-test_style_osl_qtc: FORCE
+test_style_osl_qtc:
 	# run our own checks on C/C++ style
 	USE_QTC_TASK=1 \
-	PYTHONIOENCODING=utf_8 python3 \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
-	    "$(BLENDER_DIR)/intern/cycles/kernel/shaders" \
-	    "$(BLENDER_DIR)/release/scripts/templates_osl" \
-	    > \
-	    "$(BLENDER_DIR)/test_style.tasks"
+	PYTHONIOENCODING=utf_8 python3 "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" "$(BLENDER_DIR)/intern/cycles/kernel/shaders" "$(BLENDER_DIR)/release/scripts/templates_osl" > \
+	test_style.tasks
 	@echo "written: test_style.tasks"
 
 # -----------------------------------------------------------------------------
 # Project Files
 #
 
-project_qtcreator: FORCE
+project_qtcreator:
 	python3 build_files/cmake/cmake_qtcreator_project.py "$(BUILD_DIR)"
 
-project_netbeans: FORCE
+project_netbeans:
 	python3 build_files/cmake/cmake_netbeans_project.py "$(BUILD_DIR)"
 
-project_eclipse: FORCE
+project_eclipse:
 	cmake -G"Eclipse CDT4 - Unix Makefiles" -H"$(BLENDER_DIR)" -B"$(BUILD_DIR)"
 
 
@@ -303,123 +277,90 @@ project_eclipse: FORCE
 # Static Checking
 #
 
-check_cppcheck: FORCE
+check_cppcheck:
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	python3 "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_cppcheck.py" 2> \
-	    "$(BLENDER_DIR)/check_cppcheck.txt"
+	"$(BLENDER_DIR)/check_cppcheck.txt"
 	@echo "written: check_cppcheck.txt"
 
-check_clang_array: FORCE
+check_clang_array:
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	python3 "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_clang_array.py"
 
-check_splint: FORCE
+check_splint:
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	python3 "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_splint.py"
 
-check_sparse: FORCE
+check_sparse:
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	python3 "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_sparse.py"
 
-check_smatch: FORCE
+check_smatch:
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	python3 "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_smatch.py"
 
-check_spelling_py: FORCE
+check_spelling_py:
 	cd "$(BUILD_DIR)" ; \
-	PYTHONIOENCODING=utf_8 python3 \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
-	    "$(BLENDER_DIR)/release/scripts"
+	PYTHONIOENCODING=utf_8 python3 "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" "$(BLENDER_DIR)/release/scripts"
 
-check_spelling_c: FORCE
+check_spelling_c:
 	cd "$(BUILD_DIR)" ; \
-	PYTHONIOENCODING=utf_8 python3 \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
-	    "$(BLENDER_DIR)/source" \
-	    "$(BLENDER_DIR)/intern/cycles" \
-	    "$(BLENDER_DIR)/intern/guardedalloc" \
-	    "$(BLENDER_DIR)/intern/ghost" \
+	PYTHONIOENCODING=utf_8 python3 "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" "$(BLENDER_DIR)/source"
 
-check_spelling_c_qtc: FORCE
+check_spelling_c_qtc:
 	cd "$(BUILD_DIR)" ; USE_QTC_TASK=1 \
-	PYTHONIOENCODING=utf_8 python3 \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
-	    "$(BLENDER_DIR)/source" \
-	    "$(BLENDER_DIR)/intern/cycles" \
-	    "$(BLENDER_DIR)/intern/guardedalloc" \
-	    "$(BLENDER_DIR)/intern/ghost" \
-	    > \
-	    "$(BLENDER_DIR)/check_spelling_c.tasks"
+	PYTHONIOENCODING=utf_8 python3 "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" "$(BLENDER_DIR)/source" > \
+	"$(BLENDER_DIR)/check_spelling_c.tasks"
 
-check_spelling_osl: FORCE
-	cd "$(BUILD_DIR)" ;\
-	PYTHONIOENCODING=utf_8 python3 \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
-	    "$(BLENDER_DIR)/intern/cycles/kernel/shaders"
+check_spelling_osl:
+	cd "$(BUILD_DIR)" ; PYTHONIOENCODING=utf_8 python3 "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" "$(BLENDER_DIR)/intern/cycles/kernel/shaders"
 
-check_descriptions: FORCE
-	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup --python \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_descriptions.py"
+check_descriptions:
+	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup --python "$(BLENDER_DIR)/source/tools/check_source/check_descriptions.py"
 
 # -----------------------------------------------------------------------------
 # Utilities
 #
 
-tgz: FORCE
-	./build_files/utils/build_tgz.sh
+tbz:
+	svn export . blender_archive
+	tar cjf blender_archive.tar.bz2 blender_archive/
+	rm -rf blender_archive/
+	@echo "blender_archive.tar.bz2 written"
 
-icons: FORCE
+icons:
 	"$(BLENDER_DIR)/release/datafiles/blender_icons_update.py"
 	"$(BLENDER_DIR)/release/datafiles/prvicons_update.py"
 
-update: FORCE
-	if [ -d "../lib" ]; then \
-		svn update ../lib/* ; \
-	fi
-	git pull --rebase
-	git submodule foreach git pull --rebase origin master
-
 
 # -----------------------------------------------------------------------------
 # Documentation
 #
 
 # Simple version of ./doc/python_api/sphinx_doc_gen.sh with no PDF generation.
-doc_py: FORCE
+doc_py:
 	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup --python doc/python_api/sphinx_doc_gen.py
 	cd doc/python_api ; sphinx-build -b html sphinx-in sphinx-out
 	@echo "docs written into: '$(BLENDER_DIR)/doc/python_api/sphinx-out/contents.html'"
 
-doc_doxy: FORCE
+doc_doxy:
 	cd doc/doxygen; doxygen Doxyfile
 	@echo "docs written into: '$(BLENDER_DIR)/doc/doxygen/html/index.html'"
 
-doc_dna: FORCE
+doc_dna:
 	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup --python doc/blender_file_format/BlendFileDnaExporter_25.py
 	@echo "docs written into: '$(BLENDER_DIR)/doc/blender_file_format/dna.html'"
 
-doc_man: FORCE
+doc_man:
 	python3 doc/manpage/blender.1.py "$(BUILD_DIR)/bin/blender"
 
-help_features: FORCE
-	@python3 -c \
-		"import re; \
-		print('\n'.join([ \
-		w for l in open('"$(BLENDER_DIR)"/CMakeLists.txt', 'r').readlines() \
-		if not l.lstrip().startswith('#') \
-		for w in (re.sub(\
-		    r'.*\boption\s*\(\s*(WITH_[a-zA-Z0-9_]+)\s+(\".*\")\s*.*', r'\g<1> - \g<2>', l).strip('() \n'),) \
-		if w.startswith('WITH_')]))" | uniq
 
-
-clean: FORCE
+clean:
 	$(MAKE) -C "$(BUILD_DIR)" clean
 
 .PHONY: all
-
-FORCE:

SConstruct

@@ -70,7 +70,7 @@ quickdebug = None
 
 ##### BEGIN SETUP #####
 
-B.possible_types = ['core', 'player', 'player2', 'intern', 'extern', 'system']
+B.possible_types = ['core', 'player', 'player2', 'intern', 'extern']
 
 B.binarykind = ['blender' , 'blenderplayer']
 ##################################
@@ -125,7 +125,7 @@ else:
     B.quickie=[]
 
 toolset = B.arguments.get('BF_TOOLSET', None)
-vcver = B.arguments.get('MSVS_VERSION', '12.0')
+vcver = B.arguments.get('MSVS_VERSION', '9.0')
 
 if toolset:
     print "Using " + toolset
@@ -210,16 +210,9 @@ if sys.platform=='win32':
     if B.bitness==64:
         env.Append(CPPFLAGS=['-DWIN64']) # -DWIN32 needed too, as it's used all over to target Windows generally
 
-if env['BF_DEBUG']:
-    env.Append(CPPDEFINES=['_DEBUG', 'DEBUG'])
-else:
-    env.Append(CPPDEFINES=['NDEBUG'])
-
 if not env['BF_FANCY']:
     B.bc.disable()
 
-if env['WITH_BF_SDL_DYNLOAD']:
-    env['BF_SDL_INC'] = '#extern/sdlew/include/SDL2'
 
 # remove install dir so old and new files are not mixed.
 # NOTE: only do the scripts directory for now, otherwise is too disruptive for developers
@@ -266,7 +259,6 @@ if 'blenderlite' in B.targets:
     target_env_defs['WITH_BF_BOOLEAN'] = False
     target_env_defs['WITH_BF_REMESH'] = False
     target_env_defs['WITH_BF_PYTHON'] = False
-    target_env_defs['WITH_BF_IME'] = False
     target_env_defs['WITH_BF_3DMOUSE'] = False
     target_env_defs['WITH_BF_LIBMV'] = False
     target_env_defs['WITH_BF_FREESTYLE'] = False
@@ -331,10 +323,7 @@ if env['OURPLATFORM']=='darwin':
     print B.bc.OKGREEN + "Available SDK's: \n" + B.bc.ENDC + MACOSX_SDK_CHECK.replace('\t', '')
 
     if env['MACOSX_SDK'] == '': # no set sdk, choosing best one found
-        if 'OS X 10.10' in MACOSX_SDK_CHECK:
-            env['MACOSX_DEPLOYMENT_TARGET'] = '10.6'
-            env['MACOSX_SDK']='/Developer/SDKs/MacOSX10.10.sdk'
-        elif 'OS X 10.9' in MACOSX_SDK_CHECK:
+        if 'OS X 10.9' in MACOSX_SDK_CHECK:
             env['MACOSX_DEPLOYMENT_TARGET'] = '10.6'
             env['MACOSX_SDK']='/Developer/SDKs/MacOSX10.9.sdk'
         elif 'OS X 10.8' in MACOSX_SDK_CHECK:
@@ -423,9 +412,6 @@ if env['OURPLATFORM']=='darwin':
             env.Append(LINKFLAGS=['-F/Library/Frameworks','-Xlinker','-weak_framework','-Xlinker','Jackmp'])
             print B.bc.OKGREEN + "Using Jack"
 
-    if env['WITH_BF_SDL']:
-        env.Append(LINKFLAGS=['-lazy_framework','ForceFeedback'])
-
     if env['WITH_BF_QUICKTIME'] == 1:
         env['PLATFORM_LINKFLAGS'] = env['PLATFORM_LINKFLAGS']+['-framework','QTKit']
 
@@ -444,7 +430,6 @@ if env['OURPLATFORM']=='darwin':
             print B.bc.OKGREEN + "Disabled OpenMP, not supported by compiler"
 
     if env['WITH_BF_CYCLES_OSL'] == 1:
-        env['WITH_BF_LLVM'] = 1
         OSX_OSL_LIBPATH = Dir(env.subst(env['BF_OSL_LIBPATH'])).abspath
         # we need 2 variants of passing the oslexec with the force_load option, string and list type atm
         if env['C_COMPILER_ID'] == 'gcc' and env['CCVERSION'] >= '4.8' or env['C_COMPILER_ID'] == 'clang' and env['CCVERSION'] >= '3.4':
@@ -452,12 +437,6 @@ if env['OURPLATFORM']=='darwin':
         else:
             env.Append(LINKFLAGS=['-L'+OSX_OSL_LIBPATH,'-loslcomp','-force_load '+ OSX_OSL_LIBPATH +'/liboslexec.a','-loslquery'])
         env.Append(BF_PROGRAM_LINKFLAGS=['-Xlinker','-force_load','-Xlinker',OSX_OSL_LIBPATH +'/liboslexec.a'])
-    else:
-        env['WITH_BF_LLVM'] = 0
-
-    if env['WITH_BF_LLVM'] == 0:
-        # Due duplicated generic UTF functions, we pull them either from LLVMSupport or COLLADA
-        env.Append(BF_OPENCOLLADA_LIB=' UTF')
 
     # Trying to get rid of eventually clashes, we export some symbols explicite as local
     env.Append(LINKFLAGS=['-Xlinker','-unexported_symbols_list','-Xlinker','./source/creator/osx_locals.map'])
@@ -470,14 +449,6 @@ if env['OURPLATFORM']=='darwin':
 ###################  End Automatic configuration for OSX   ##################
 #############################################################################
 
-if env['OURPLATFORM'] == 'linux' and not env['C_COMPILER_ID']:
-    command = ["%s"%env['CC'], "--version"]
-    line = btools.get_command_output(command)
-    if line.startswith('gcc'):
-        env['C_COMPILER_ID'] = 'gcc'
-    elif 'clang' in line[0]:
-        env['C_COMPILER_ID'] = 'clang'
-
 if env['WITH_BF_OPENMP'] == 1:
         if env['OURPLATFORM'] in ('win32-vc', 'win64-vc'):
                 env['CCFLAGS'].append('/openmp')
@@ -488,13 +459,6 @@ if env['WITH_BF_OPENMP'] == 1:
             else:
                 env.Append(CCFLAGS=['-fopenmp'])
 
-if env['WITH_BF_CPP11']:
-    if env['OURPLATFORM'] in ('win32-vc', 'win64-vc'):
-        # Nothing special is needed, C++11 features are available by default.
-        pass
-    else:
-        env['CXXFLAGS'].append('-std=c++11')
-
 #check for additional debug libnames
 
 if env.has_key('BF_DEBUG_LIBS'):
@@ -547,49 +511,6 @@ env['CPPFLAGS'].append('-DWITH_OPENNL')
 if env['OURPLATFORM'] not in ('win32-vc', 'win64-vc'):
     env['CPPFLAGS'].append('-DHAVE_STDBOOL_H')
 
-# OpenGL
-
-if env['WITH_BF_GL_PROFILE_COMPAT']:
-    env['BF_GL_DEFINITIONS'].append('WITH_GL_PROFILE_COMPAT')
-
-if env['WITH_BF_GL_PROFILE_CORE']:
-    env['BF_GL_DEFINITIONS'].append('WITH_GL_PROFILE_CORE')
-
-if env['WITH_BF_GL_PROFILE_ES20']:
-    env['BF_GL_DEFINITIONS'].append('WITH_GL_PROFILE_ES20')
-
-if env['WITH_BF_GL_EGL']:
-    env['BF_GL_DEFINITIONS'].append('WITH_EGL')
-
-# GLEW
-
-if env['WITH_BF_GLEW_MX']:
-    env['BF_GL_DEFINITIONS'].append('WITH_GLEW_MX')
-
-if env['WITH_BF_GLEW_ES']:
-    env['BF_GLEW_INC'] = '#extern/glew-es/include'
-
-    env['BF_GL_DEFINITIONS'] += ['GLEW_STATIC', 'WITH_GLEW_ES']
-
-    if not env['WITH_BF_GL_PROFILE_ES20']:
-        # No ES functions are needed
-        env['BF_GL_DEFINITIONS'].append('GLEW_NO_ES')
-    elif not (env['WITH_BF_GL_PROFILE_CORE'] or env['WITH_BF_GL_PROFILE_COMPAT']):
-        # ES is enabled, but the other functions are all disabled
-        env['BF_GL_DEFINITIONS'].append('GLEW_ES_ONLY')
-
-    if env['WITH_BF_GL_PROFILE_ES20']:
-        if env['WITH_BF_GL_EGL']:
-            env['BF_GL_DEFINITIONS'].append('GLEW_USE_LIB_ES20')
-
-    if env['WITH_BF_GL_EGL']:
-        env['BF_GL_DEFINITIONS'].append('GLEW_INC_EGL')
-
-else:
-    env['BF_GLEW_INC'] = '#extern/glew/include'
-
-    env['BF_GL_DEFINITIONS'].append('GLEW_STATIC')
-
 # lastly we check for root_build_dir ( we should not do before, otherwise we might do wrong builddir
 B.root_build_dir = env['BF_BUILDDIR']
 B.doc_build_dir = os.path.join(env['BF_INSTALLDIR'], 'doc')
@@ -691,36 +612,31 @@ def data_to_c(FILE_FROM, FILE_TO, VAR_NAME):
         FILE_FROM = FILE_FROM.replace("/", "\\")
         FILE_TO   = FILE_TO.replace("/", "\\")
 
-    try:
-        # first check if we need to bother.
-        if os.path.exists(FILE_TO):
-            if os.path.getmtime(FILE_FROM) < os.path.getmtime(FILE_TO):
-                return
+    # first check if we need to bother.
+    if os.path.exists(FILE_TO):
+        if os.path.getmtime(FILE_FROM) < os.path.getmtime(FILE_TO):
+            return
 
-        print(B.bc.HEADER + "Generating: " + B.bc.ENDC + "%r" % os.path.basename(FILE_TO))
-        fpin = open(FILE_FROM, "rb")
-        fpin.seek(0, os.SEEK_END)
-        size = fpin.tell()
-        fpin.seek(0)
+    print(B.bc.HEADER + "Generating: " + B.bc.ENDC + "%r" % os.path.basename(FILE_TO))
+    fpin = open(FILE_FROM, "rb")
+    fpin.seek(0, os.SEEK_END)
+    size = fpin.tell()
+    fpin.seek(0)
 
-        fpout = open(FILE_TO, "w")
-        fpout.write("int  %s_size = %d;\n" % (VAR_NAME, size))
-        fpout.write("char %s[] = {\n" % VAR_NAME)
+    fpout = open(FILE_TO, "w")
+    fpout.write("int  %s_size = %d;\n" % (VAR_NAME, size))
+    fpout.write("char %s[] = {\n" % VAR_NAME)
 
-        while size > 0:
-            size -= 1
-            if size % 32 == 31:
-                fpout.write("\n")
+    while size > 0:
+        size -= 1
+        if size % 32 == 31:
+            fpout.write("\n")
 
-            fpout.write("%3d," % ord(fpin.read(1)))
-        fpout.write("\n  0};\n\n")
+        fpout.write("%3d," % ord(fpin.read(1)))
+    fpout.write("\n  0};\n\n")
 
-        fpin.close()
-        fpout.close()
-    except KeyboardInterrupt:
-        if os.path.exists(FILE_TO):
-            os.remove(FILE_TO)
-        raise KeyboardInterrupt
+    fpin.close()
+    fpout.close()
 
 def data_to_c_simple(FILE_FROM):
 	filename_only = os.path.basename(FILE_FROM)
@@ -745,12 +661,7 @@ def data_to_c_simple_icon(PATH_FROM):
     FILE_TO_PNG = os.path.join(env['DATA_SOURCES'], filename_only + ".png")
     FILE_TO = FILE_TO_PNG + ".c"
     argv = [PATH_FROM, FILE_TO_PNG]
-    try:
-        datatoc_icon.main_ex(argv)
-    except KeyboardInterrupt:
-        if os.path.exists(FILE_TO_PNG):
-            os.remove(FILE_TO_PNG)
-        raise KeyboardInterrupt
+    datatoc_icon.main_ex(argv)
 
     # then the png to a c file
     data_to_c_simple(FILE_TO_PNG)
@@ -766,9 +677,6 @@ if B.targets != ['cudakernels']:
     data_to_c_simple("release/datafiles/preview_cycles.blend")
 
     # --- glsl ---
-    data_to_c_simple("source/blender/gpu/shaders/gpu_program_smoke_frag.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_program_smoke_color_frag.glsl")
-
     data_to_c_simple("source/blender/gpu/shaders/gpu_shader_simple_frag.glsl")
     data_to_c_simple("source/blender/gpu/shaders/gpu_shader_simple_vert.glsl")
     data_to_c_simple("source/blender/gpu/shaders/gpu_shader_material.glsl")
@@ -776,18 +684,8 @@ if B.targets != ['cudakernels']:
     data_to_c_simple("source/blender/gpu/shaders/gpu_shader_sep_gaussian_blur_frag.glsl")
     data_to_c_simple("source/blender/gpu/shaders/gpu_shader_sep_gaussian_blur_vert.glsl")
     data_to_c_simple("source/blender/gpu/shaders/gpu_shader_vertex.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_vertex_world.glsl")
     data_to_c_simple("source/blender/gpu/shaders/gpu_shader_vsm_store_frag.glsl")
     data_to_c_simple("source/blender/gpu/shaders/gpu_shader_vsm_store_vert.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_fx_ssao_frag.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_fx_dof_frag.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_fx_dof_vert.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_fx_dof_hq_frag.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_fx_dof_hq_vert.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_fx_dof_hq_geo.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_fx_lib.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_fx_depth_resolve.glsl")
-    data_to_c_simple("source/blender/gpu/shaders/gpu_shader_fx_vert.glsl")
     data_to_c_simple("intern/opencolorio/gpu_shader_display_transform.glsl")
 
     # --- blender ---
@@ -817,13 +715,6 @@ if B.targets != ['cudakernels']:
     data_to_c_simple("release/datafiles/brushicons/fill.png")
     data_to_c_simple("release/datafiles/brushicons/flatten.png")
     data_to_c_simple("release/datafiles/brushicons/grab.png")
-    data_to_c_simple("release/datafiles/brushicons/hairadd.png")
-    data_to_c_simple("release/datafiles/brushicons/haircomb.png")
-    data_to_c_simple("release/datafiles/brushicons/haircut.png")
-    data_to_c_simple("release/datafiles/brushicons/hairlength.png")
-    data_to_c_simple("release/datafiles/brushicons/hairpuff.png")
-    data_to_c_simple("release/datafiles/brushicons/hairsmooth.png")
-    data_to_c_simple("release/datafiles/brushicons/hairweight.png")
     data_to_c_simple("release/datafiles/brushicons/inflate.png")
     data_to_c_simple("release/datafiles/brushicons/layer.png")
     data_to_c_simple("release/datafiles/brushicons/lighten.png")
@@ -839,8 +730,6 @@ if B.targets != ['cudakernels']:
     data_to_c_simple("release/datafiles/brushicons/soften.png")
     data_to_c_simple("release/datafiles/brushicons/subtract.png")
     data_to_c_simple("release/datafiles/brushicons/texdraw.png")
-    data_to_c_simple("release/datafiles/brushicons/texfill.png")
-    data_to_c_simple("release/datafiles/brushicons/texmask.png")
     data_to_c_simple("release/datafiles/brushicons/thumb.png")
     data_to_c_simple("release/datafiles/brushicons/twist.png")
     data_to_c_simple("release/datafiles/brushicons/vertexdraw.png")
@@ -889,21 +778,17 @@ B.init_lib_dict()
 
 ##### END SETUP ##########
 
-## Auto-configuration run-time tests
+if B.targets != ['cudakernels']:
+    # Put all auto configuration run-time tests here
 
-from FindSharedPtr import FindSharedPtr
-from FindUnorderedMap import FindUnorderedMap
+    from FindSharedPtr import FindSharedPtr
+    from FindUnorderedMap import FindUnorderedMap
 
-conf = Configure(env)
-old_linkflags = conf.env['LINKFLAGS']
-conf.env.Append(LINKFLAGS=env['PLATFORM_LINKFLAGS'])
-
-# Put all tests here
-FindSharedPtr(conf)
-FindUnorderedMap(conf)
-
-conf.env['LINKFLAGS'] = old_linkflags
-env = conf.Finish()
+    conf = Configure(env)
+    conf.env.Append(LINKFLAGS=env['PLATFORM_LINKFLAGS'])
+    FindSharedPtr(conf)
+    FindUnorderedMap(conf)
+    env = conf.Finish()
 
 # End of auto configuration
 
@@ -921,7 +806,7 @@ SConscript(B.root_build_dir+'/extern/SConscript')
 # libraries to give as objects to linking phase
 mainlist = []
 for tp in B.possible_types:
-    if (not tp == 'player') and (not tp == 'player2') and (not tp == 'system'):
+    if (not tp == 'player') and (not tp == 'player2'):
         mainlist += B.create_blender_liblist(env, tp)
 
 if B.arguments.get('BF_PRIORITYLIST', '0')=='1':
@@ -933,17 +818,7 @@ thestatlibs, thelibincs = B.setup_staticlibs(env)
 thesyslibs = B.setup_syslibs(env)
 
 if 'blender' in B.targets or not env['WITH_BF_NOBLENDER']:
-    blender_progname = "blender"
-    if env['OURPLATFORM'] in ('win32-vc', 'win32-mingw', 'win64-vc', 'linuxcross'):
-        blender_progname = "blender-app"
-
-        lenv = env.Clone()
-        lenv.Append(LINKFLAGS = env['PLATFORM_LINKFLAGS'])
-        targetpath = B.root_build_dir + '/blender'
-        launcher_obj = [env.Object(B.root_build_dir + 'source/creator/creator/creator_launch_win', ['#source/creator/creator_launch_win.c'])]
-        env.BlenderProg(B.root_build_dir, 'blender', [launcher_obj] + B.resources, ['bf_utfconv'] + thesyslibs, [B.root_build_dir+'/lib'] + thelibincs, 'blender')
-
-    env.BlenderProg(B.root_build_dir, blender_progname, creob + mainlist + thestatlibs + dobj, thesyslibs, [B.root_build_dir+'/lib'] + thelibincs, 'blender')
+    env.BlenderProg(B.root_build_dir, "blender", creob + mainlist + thestatlibs + dobj, thesyslibs, [B.root_build_dir+'/lib'] + thelibincs, 'blender')
 if env['WITH_BF_PLAYER']:
     playerlist = B.create_blender_liblist(env, 'player')
     playerlist += B.create_blender_liblist(env, 'player2')
@@ -993,10 +868,6 @@ if env['OURPLATFORM']!='darwin':
         td, tf = os.path.split(targetdir)
         dotblenderinstall.append(env.Install(dir=td, source=srcfile))
 
-    if env['OURPLATFORM'] in ('win32-vc', 'win32-mingw', 'win64-vc', 'linuxcross'):
-        scriptinstall.append(env.InstallAs(env['BF_INSTALLDIR'] + '/blender-app.exe.manifest',
-                                           'source/icons/blender.exe.manifest'))
-
     if env['WITH_BF_PYTHON']:
         #-- local/VERSION/scripts
         scriptpaths=['release/scripts']
@@ -1035,20 +906,17 @@ if env['OURPLATFORM']!='darwin':
             dir=os.path.join(env['BF_INSTALLDIR'], VERSION, 'scripts', 'addons','cycles', 'kernel')
             source=os.listdir('intern/cycles/kernel')
             if '__pycache__' in source: source.remove('__pycache__')
+            source.remove('kernel.cpp')
             source.remove('CMakeLists.txt')
-            source.remove('SConscript')
             source.remove('svm')
             source.remove('closure')
             source.remove('geom')
             source.remove('shaders')
             source.remove('osl')
-            source.remove('split')
             source=['intern/cycles/kernel/'+s for s in source]
-            source.append('intern/cycles/util/util_atomic.h')
             source.append('intern/cycles/util/util_color.h')
             source.append('intern/cycles/util/util_half.h')
             source.append('intern/cycles/util/util_math.h')
-            source.append('intern/cycles/util/util_math_fast.h')
             source.append('intern/cycles/util/util_transform.h')
             source.append('intern/cycles/util/util_types.h')
             scriptinstall.append(env.Install(dir=dir,source=source))
@@ -1070,12 +938,6 @@ if env['OURPLATFORM']!='darwin':
             if '__pycache__' in source: source.remove('__pycache__')
             source=['intern/cycles/kernel/geom/'+s for s in source]
             scriptinstall.append(env.Install(dir=dir,source=source))
-            # split
-            dir=os.path.join(env['BF_INSTALLDIR'], VERSION, 'scripts', 'addons','cycles', 'kernel', 'split')
-            source=os.listdir('intern/cycles/kernel/split')
-            if '__pycache__' in source: source.remove('__pycache__')
-            source=['intern/cycles/kernel/split/'+s for s in source]
-            scriptinstall.append(env.Install(dir=dir,source=source))
 
             # licenses
             dir=os.path.join(env['BF_INSTALLDIR'], VERSION, 'scripts', 'addons','cycles', 'license')
@@ -1091,9 +953,8 @@ if env['OURPLATFORM']!='darwin':
             dir=os.path.join(env['BF_INSTALLDIR'], VERSION, 'scripts', 'addons','cycles', 'lib')
             for arch in env['BF_CYCLES_CUDA_BINARIES_ARCH']:
                 kernel_build_dir = os.path.join(B.root_build_dir, 'intern/cycles/kernel')
-                for suffix in ('', '_experimental'):
-                    cubin_file = os.path.join(kernel_build_dir, "kernel%s_%s.cubin" % (suffix, arch))
-                    cubininstall.append(env.Install(dir=dir,source=cubin_file))
+                cubin_file = os.path.join(kernel_build_dir, "kernel_%s.cubin" % arch)
+                cubininstall.append(env.Install(dir=dir,source=cubin_file))
 
         # osl shaders
         if env['WITH_BF_CYCLES_OSL']:
@@ -1205,37 +1066,9 @@ if env['OURPLATFORM']=='linuxcross':
 textlist = []
 texttargetlist = []
 for tp, tn, tf in os.walk('release/text'):
-    tf.remove("readme.html")
     for f in tf:
         textlist.append(tp+os.sep+f)
 
-def readme_version_patch():
-    readme_src = "release/text/readme.html"
-    readme_dst = os.path.abspath(os.path.normpath(os.path.join(env['BF_BUILDDIR'], "readme.html")))
-
-    if not os.path.exists(readme_dst) or (os.path.getmtime(readme_dst) < os.path.getmtime(readme_src)):
-        f = open(readme_src, "r")
-        data = f.read()
-        f.close()
-
-        data = data.replace("BLENDER_VERSION", VERSION)
-        f = open(readme_dst, "w")
-        f.write(data)
-        f.close()
-
-    textlist.append(readme_dst)
-
-readme_version_patch()
-del readme_version_patch
-
-
-'''Command(
-    "release/text/readme.html"
-
-    )
-Command("file.out", "file.in", Copy(env['BF_INSTALLDIR'], "release/text/readme.html"))
-'''
-
 # Font licenses
 textlist.append('release/datafiles/LICENSE-bfont.ttf.txt')
 if env['WITH_BF_INTERNATIONAL']:
@@ -1262,15 +1095,16 @@ if env['OURPLATFORM'] in ('win32-vc', 'win32-mingw', 'win64-vc', 'linuxcross'):
         dllsources += ['${BF_PTHREADS_LIBPATH}/${BF_PTHREADS_LIB}.dll']
 
     if env['WITH_BF_SDL']:
-        dllsources.append('${BF_SDL_LIBPATH}/SDL2.dll')
+        if env['OURPLATFORM'] == 'win64-vc':
+            pass # we link statically already to SDL on win64
+        else:
+            dllsources.append('${BF_SDL_LIBPATH}/SDL.dll')
 
     if env['WITH_BF_PYTHON']:
         if env['BF_DEBUG']:
             dllsources.append('${BF_PYTHON_LIBPATH}/${BF_PYTHON_DLL}_d.dll')
-            dllsources.append('${BF_PYTHON_LIBPATH}/sqlite3_d.dll')
         else:
             dllsources.append('${BF_PYTHON_LIBPATH}/${BF_PYTHON_DLL}.dll')
-            dllsources.append('${BF_PYTHON_LIBPATH}/sqlite3.dll')
 
     if env['WITH_BF_ICONV']:
         if env['OURPLATFORM'] == 'win64-vc':
@@ -1281,6 +1115,7 @@ if env['OURPLATFORM'] in ('win32-vc', 'win32-mingw', 'win64-vc', 'linuxcross'):
 
     if env['WITH_BF_OPENAL']:
         dllsources.append('${LCGDIR}/openal/lib/OpenAL32.dll')
+        dllsources.append('${LCGDIR}/openal/lib/wrap_oal.dll')
 
     if env['WITH_BF_SNDFILE']:
         dllsources.append('${LCGDIR}/sndfile/lib/libsndfile-1.dll')

build_files/build_environment/install_deps.sh

@@ -25,12 +25,10 @@
 ARGS=$( \
 getopt \
 -o s:i:t:h \
---long source:,install:,tmp:,info:,threads:,help,no-sudo,with-all,with-opencollada,\
-ver-ocio:,ver-oiio:,ver-llvm:,ver-osl:,\
+--long source:,install:,tmp:,threads:,help,no-sudo,with-all,with-opencollada,ver-ocio:,ver-oiio:,ver-llvm:,ver-osl:,\
 force-all,force-python,force-numpy,force-boost,force-ocio,force-oiio,force-llvm,force-osl,force-opencollada,\
-force-ffmpeg,force-alembic,\
-skip-python,skip-numpy,skip-boost,skip-ocio,skip-openexr,skip-oiio,skip-llvm,skip-osl,skip-ffmpeg,skip-opencollada,skip-alembic,\
-required-numpy: \
+force-ffmpeg,skip-python,skip-numpy,skip-boost,skip-ocio,skip-oiio,skip-llvm,skip-osl,skip-ffmpeg,\
+skip-opencollada,required-numpy,libyaml-cpp-ver: \
 -- "$@" \
 )
 
@@ -40,7 +38,6 @@ SRC="$HOME/src/blender-deps"
 INST="/opt/lib"
 TMP="/tmp"
 CWD=$PWD
-INFO_PATH=$CWD
 
 # Do not install some optional, potentially conflicting libs by default...
 WITH_ALL=false
@@ -77,13 +74,10 @@ ARGUMENTS_INFO="\"COMMAND LINE ARGUMENTS:
     --tmp=<path>
         Use a specific temp path (defaults to '\$TMP').
 
-    --info=<path>
-        Use a specific info path (to store BUILD_NOTES.txt, defaults to '\$INFO_PATH').
-
     -t n, --threads=n
         Use a specific number of threads when building the libraries (auto-detected as '\$THREADS').
 
-    --no-sudo
+    --no_sudo
         Disable use of sudo (this script won't be able to do much though, will just print needed packages...).
 
     --with-all
@@ -95,9 +89,6 @@ ARGUMENTS_INFO="\"COMMAND LINE ARGUMENTS:
     --with-opencollada
         Build and install the OpenCOLLADA libraries.
 
-    --with-alembic
-        Build and install the Alembic library.
-
     --ver-ocio=<ver>
         Force version of OCIO library.
 
@@ -147,9 +138,6 @@ ARGUMENTS_INFO="\"COMMAND LINE ARGUMENTS:
     --force-ffmpeg
         Force the rebuild of FFMpeg.
 
-    --force-alembic
-        Force the rebuild of Alembic.
-
     Note about the --force-foo options:
         * They obviously only have an effect if those libraries are built by this script
           (i.e. if there is no available and satisfactory package)!
@@ -186,12 +174,13 @@ ARGUMENTS_INFO="\"COMMAND LINE ARGUMENTS:
     --skip-ffmpeg
         Unconditionally skip FFMpeg installation/building.
 
-    --skip-alembic
-        Unconditionally skip Alembic installation/building.
-
     --required-numpy
         Use this in case your distro features a valid python package, but no matching Numpy one.
-        It will force compilation of both python and numpy\""
+        It will force compilation of both python and numpy
+
+    --libyaml-cpp-ver=<ver>
+        Ubuntu hack: you may have to force installation of a non-defaut version of libyaml-cpp
+        (e.g. ocio in trusty uses 0.3, while default version is 0.5... *sigh*)\""
 
 ##### Main Vars #####
 
@@ -213,31 +202,33 @@ BOOST_VERSION_MIN="1.49"
 BOOST_FORCE_REBUILD=false
 BOOST_SKIP=false
 
-OCIO_VERSION="1.0.9"
+OCIO_VERSION="1.0.7"
 OCIO_VERSION_MIN="1.0"
 OCIO_FORCE_REBUILD=false
 OCIO_SKIP=false
+LIBYAML_CPP_VER_DEFINED=false
+LIBYAML_CPP_VER="0.0"
 
-OPENEXR_VERSION="2.2.0"
+OPENEXR_VERSION="2.1.0"
 OPENEXR_VERSION_MIN="2.0.1"
-ILMBASE_VERSION="2.2.0"
+ILMBASE_VERSION="2.1.0"
 OPENEXR_FORCE_REBUILD=false
 OPENEXR_SKIP=false
 _with_built_openexr=false
 
-OIIO_VERSION="1.4.16"
+OIIO_VERSION="1.4.0"
 OIIO_VERSION_MIN="1.4.0"
 OIIO_FORCE_REBUILD=false
 OIIO_SKIP=false
 
-LLVM_VERSION="3.4"
-LLVM_VERSION_MIN="3.4"
+LLVM_VERSION="3.3"
+LLVM_VERSION_MIN="3.3"
 LLVM_VERSION_FOUND=""
 LLVM_FORCE_REBUILD=false
 LLVM_SKIP=false
 
 # OSL needs to be compiled for now!
-OSL_VERSION="1.5.11"
+OSL_VERSION="1.4.0"
 OSL_VERSION_MIN=$OSL_VERSION
 OSL_FORCE_REBUILD=false
 OSL_SKIP=false
@@ -247,8 +238,8 @@ OPENCOLLADA_VERSION="1.3"
 OPENCOLLADA_FORCE_REBUILD=false
 OPENCOLLADA_SKIP=false
 
-FFMPEG_VERSION="2.1.5"
-FFMPEG_VERSION_MIN="2.1.5"
+FFMPEG_VERSION="2.1.4"
+FFMPEG_VERSION_MIN="0.7.6"
 FFMPEG_FORCE_REBUILD=false
 FFMPEG_SKIP=false
 _ffmpeg_list_sep=";"
@@ -273,11 +264,6 @@ MP3LAME_DEV=""
 OPENJPEG_USE=false
 OPENJPEG_DEV=""
 
-ALEMBIC_VERSION="1.5.5"
-ALEMBIC_VERSION_MIN="1.5.5"
-ALEMBIC_FORCE_REBUILD=false
-ALEMBIC_SKIP=false
-
 # Switch to english language, else some things (like check_package_DEB()) won't work!
 LANG_BACK=$LANG
 LANG=""
@@ -340,9 +326,6 @@ while true; do
     --tmp)
       TMP="$2"; shift; shift; continue
     ;;
-    --info)
-      INFO_PATH="$2"; shift; shift; continue
-    ;;
     -t|--threads)
       THREADS="$2"; shift; shift; continue
     ;;
@@ -437,9 +420,6 @@ while true; do
     --force-ffmpeg)
       FFMPEG_FORCE_REBUILD=true; shift; continue
     ;;
-    --force-alembic)
-      ALEMBIC_FORCE_REBUILD=true; shift; continue
-    ;;
     --skip-python)
       PYTHON_SKIP=true; shift; continue
     ;;
@@ -470,12 +450,12 @@ while true; do
     --skip-ffmpeg)
       FFMPEG_SKIP=true; shift; continue
     ;;
-    --skip-alembic)
-      ALEMBIC_SKIP=true; shift; continue
-    ;;
     --required-numpy)
       NUMPY_REQUIRED=true; shift; continue
     ;;
+    --libyaml-cpp-ver)
+      LIBYAML_CPP_VER_DEFINED=true; LIBYAML_CPP_VER="$2"; shift; shift; continue
+    ;;
     --)
       # no more arguments to parse
       break
@@ -491,12 +471,11 @@ while true; do
   esac
 done
 
-if [ $WITH_ALL == true -a $OPENCOLLADA_SKIP == false ]; then
+if $WITH_ALL; then
   WITH_OPENCOLLADA=true
 fi
 
 
-
 # This has to be done here, because user might force some versions...
 PYTHON_SOURCE=( "http://python.org/ftp/python/$PYTHON_VERSION/Python-$PYTHON_VERSION.tgz" )
 NUMPY_SOURCE=( "http://sourceforge.net/projects/numpy/files/NumPy/$NUMPY_VERSION/numpy-$NUMPY_VERSION.tar.gz" )
@@ -504,38 +483,26 @@ _boost_version_nodots=`echo "$BOOST_VERSION" | sed -r 's/\./_/g'`
 BOOST_SOURCE=( "http://sourceforge.net/projects/boost/files/boost/$BOOST_VERSION/boost_$_boost_version_nodots.tar.bz2/download" )
 
 OCIO_SOURCE=( "https://github.com/imageworks/OpenColorIO/tarball/v$OCIO_VERSION" )
-
-OPENEXR_USE_REPO=false
-OPENEXR_SOURCE=( "http://download.savannah.nongnu.org/releases/openexr/openexr-$OPENEXR_VERSION.tar.gz" )
-OPENEXR_SOURCE_REPO=( "https://github.com/mont29/openexr.git" )
-OPENEXR_SOURCE_REPO_UID="2787aa1cf652d244ed45ae124eb1553f6cff11ee"
+#OPENEXR_SOURCE=( "http://download.savannah.nongnu.org/releases/openexr/openexr-$OPENEXR_VERSION.tar.gz" )
+OPENEXR_SOURCE=( "https://github.com/mont29/openexr.git" )
+OPENEXR_REPO_UID="2787aa1cf652d244ed45ae124eb1553f6cff11ee"
 ILMBASE_SOURCE=( "http://download.savannah.nongnu.org/releases/openexr/ilmbase-$ILMBASE_VERSION.tar.gz" )
 
-OIIO_USE_REPO=false
-OIIO_SOURCE=( "https://github.com/OpenImageIO/oiio/archive/Release-$OIIO_VERSION.tar.gz" )
-OIIO_SOURCE_REPO=( "https://github.com/OpenImageIO/oiio.git" )
-OIIO_SOURCE_REPO_UID="c9e67275a0b248ead96152f6d2221cc0c0f278a4"
+#OIIO_SOURCE=( "https://github.com/OpenImageIO/oiio/archive/Release-$OIIO_VERSION.tar.gz" )
+OIIO_SOURCE=( "https://github.com/mont29/oiio.git" )
+OIIO_REPO_UID="99113d12619c90cf44721195a759674ea61f02b1"
 
 LLVM_SOURCE=( "http://llvm.org/releases/$LLVM_VERSION/llvm-$LLVM_VERSION.src.tar.gz" )
 LLVM_CLANG_SOURCE=( "http://llvm.org/releases/$LLVM_VERSION/clang-$LLVM_VERSION.src.tar.gz" "http://llvm.org/releases/$LLVM_VERSION/cfe-$LLVM_VERSION.src.tar.gz" )
-OSL_USE_REPO=true
-#~ OSL_SOURCE=( "https://github.com/imageworks/OpenShadingLanguage/archive/Release-$OSL_VERSION.tar.gz" )
-OSL_SOURCE=( "https://github.com/Nazg-Gul/OpenShadingLanguage/archive/Release-1.5.11.tar.gz" )
-#~ OSL_SOURCE_REPO=( "https://github.com/imageworks/OpenShadingLanguage.git" )
-#~ OSL_SOURCE_REPO=( "https://github.com/mont29/OpenShadingLanguage.git" )
-#~ OSL_SOURCE_REPO_UID="85179714e1bc69cd25ecb6bb711c1a156685d395"
-#~ OSL_SOURCE_REPO_BRANCH="master"
-OSL_SOURCE_REPO=( "https://github.com/Nazg-Gul/OpenShadingLanguage.git" )
-OSL_SOURCE_REPO_UID="22ee5ea298fd215430dfbd160b5aefd507f06db0"
-OSL_SOURCE_REPO_BRANCH="blender-fixes"
+#OSL_SOURCE=( "https://github.com/imageworks/OpenShadingLanguage/archive/Release-$OSL_VERSION.tar.gz" )
+#OSL_SOURCE=( "https://github.com/mont29/OpenShadingLanguage.git" )
+OSL_SOURCE=( "https://github.com/imageworks/OpenShadingLanguage.git" )
+OSL_REPO_UID="4abd672ed3979e5e965323201a5ba5ab802a76a9"
 
 OPENCOLLADA_SOURCE=( "https://github.com/KhronosGroup/OpenCOLLADA.git" )
-OPENCOLLADA_REPO_UID="3335ac164e68b2512a40914b14c74db260e6ff7d"
+OPENCOLLADA_REPO_UID="18da7f4109a8eafaa290a33f5550501cc4c8bae8"
 FFMPEG_SOURCE=( "http://ffmpeg.org/releases/ffmpeg-$FFMPEG_VERSION.tar.bz2" )
 
-ALEMBIC_SOURCE=( "https://code.google.com/p/alembic/" )
-ALEMBIC_REPO_UID=( "1_05_05" )
-
 
 ##### Generic Helpers #####
 
@@ -862,7 +829,6 @@ compile_Boost() {
     # Rebuild dependecies as well!
     OIIO_FORCE_REBUILD=true
     OSL_FORCE_REBUILD=true
-    ALEMBIC_FORCE_REBUILD=true
 
     prepare_opt
 
@@ -1007,11 +973,12 @@ clean_ILMBASE() {
 
 compile_ILMBASE() {
   # To be changed each time we make edits that would modify the compiled result!
-  ilmbase_magic=10
+  ilmbase_magic=8
   _init_ilmbase
 
   # Clean install if needed!
   magic_compile_check ilmbase-$ILMBASE_VERSION $ilmbase_magic
+
   if [ $? -eq 1 -o $OPENEXR_FORCE_REBUILD == true ]; then
     clean_ILMBASE
     rm -rf $_openexr_inst
@@ -1031,7 +998,8 @@ compile_ILMBASE() {
       download ILMBASE_SOURCE[@] $_src.tar.gz
 
       INFO "Unpacking ILMBase-$ILMBASE_VERSION"
-      tar -C $SRC --transform "s,(.*/?)ilmbase-[^/]*(.*),\1ILMBase-$ILMBASE_VERSION\2,x" -xf $_src.tar.gz
+      tar -C $SRC --transform "s,(.*/?)ilmbase-[^/]*(.*),\1ILMBase-$ILMBASE_VERSION\2,x" \
+          -xf $_src.tar.gz
 
     fi
 
@@ -1047,7 +1015,6 @@ compile_ILMBASE() {
     cmake_d="$cmake_d -D CMAKE_PREFIX_PATH=$_inst"
     cmake_d="$cmake_d -D CMAKE_INSTALL_PREFIX=$_inst"
     cmake_d="$cmake_d -D BUILD_SHARED_LIBS=ON"
-    cmake_d="$cmake_d -D NAMESPACE_VERSIONING=OFF"  # VERY IMPORTANT!!!
 
     if file /bin/cp | grep -q '32-bit'; then
       cflags="-fPIC -m32 -march=i686"
@@ -1093,7 +1060,7 @@ clean_OPENEXR() {
 
 compile_OPENEXR() {
   # To be changed each time we make edits that would modify the compiled result!
-  openexr_magic=13
+  openexr_magic=12
 
   # Clean install if needed!
   magic_compile_check openexr-$OPENEXR_VERSION $openexr_magic
@@ -1120,28 +1087,24 @@ compile_OPENEXR() {
       INFO "Downloading OpenEXR-$OPENEXR_VERSION"
       mkdir -p $SRC
 
-      if [ $OPENEXR_USE_REPO == true ]; then
-        git clone ${OPENEXR_SOURCE_REPO[0]} $_src
-      else
-        download OPENEXR_SOURCE[@] $_src.tar.gz
-        INFO "Unpacking OpenEXR-$OPENEXR_VERSION"
-        tar -C $SRC --transform "s,(.*/?)openexr[^/]*(.*),\1OpenEXR-$OPENEXR_VERSION\2,x" -xf $_src.tar.gz
-      fi
+#      download OPENEXR_SOURCE[@] $_src.tar.gz
+
+#      INFO "Unpacking OpenEXR-$OPENEXR_VERSION"
+#      tar -C $SRC --transform "s,(.*/?)openexr[^/]*(.*),\1OpenEXR-$OPENEXR_VERSION\2,x" \
+#          -xf $_src.tar.gz
+
+      git clone ${OPENEXR_SOURCE[0]} $_src
 
     fi
 
     cd $_src
 
-    if [ $OPENEXR_USE_REPO == true ]; then
-      # XXX For now, always update from latest repo...
-      git pull origin master
-      # Stick to same rev as windows' libs...
-      git checkout $OPENEXR_SOURCE_REPO_UID
-      git reset --hard
-      oiio_src_path="../OpenEXR"
-    else
-      oiio_src_path=".."
-    fi
+    # XXX For now, always update from latest repo...
+    git pull origin master
+
+    # Stick to same rev as windows' libs...
+    git checkout $OPENEXR_REPO_UID
+    git reset --hard
 
     # Always refresh the whole build!
     if [ -d build ]; then
@@ -1155,7 +1118,6 @@ compile_OPENEXR() {
     cmake_d="$cmake_d -D CMAKE_INSTALL_PREFIX=$_inst"
     cmake_d="$cmake_d -D ILMBASE_PACKAGE_PREFIX=$_ilmbase_inst"
     cmake_d="$cmake_d -D BUILD_SHARED_LIBS=ON"
-    cmake_d="$cmake_d -D NAMESPACE_VERSIONING=OFF"  # VERY IMPORTANT!!!
 
     if file /bin/cp | grep -q '32-bit'; then
       cflags="-fPIC -m32 -march=i686"
@@ -1163,7 +1125,7 @@ compile_OPENEXR() {
       cflags="-fPIC"
     fi
 
-    cmake $cmake_d -D CMAKE_CXX_FLAGS="$cflags" -D CMAKE_EXE_LINKER_FLAGS="-lgcc_s -lgcc" $oiio_src_path
+    cmake $cmake_d -D CMAKE_CXX_FLAGS="$cflags" -D CMAKE_EXE_LINKER_FLAGS="-lgcc_s -lgcc" ../OpenEXR
 
     make -j$THREADS && make install
 
@@ -1227,25 +1189,24 @@ compile_OIIO() {
 
     if [ ! -d $_src ]; then
       mkdir -p $SRC
+#      download OIIO_SOURCE[@] "$_src.tar.gz"
+
+#      INFO "Unpacking OpenImageIO-$OIIO_VERSION"
+#      tar -C $SRC --transform "s,(.*/?)oiio-Release-[^/]*(.*),\1OpenImageIO-$OIIO_VERSION\2,x" \
+#          -xf $_src.tar.gz
+
+      git clone ${OIIO_SOURCE[0]} $_src
 
-      if [ $OIIO_USE_REPO == true ]; then
-        git clone ${OIIO_SOURCE_REPO[0]} $_src
-      else
-        download OIIO_SOURCE[@] "$_src.tar.gz"
-        INFO "Unpacking OpenImageIO-$OIIO_VERSION"
-        tar -C $SRC --transform "s,(.*/?)oiio-Release-[^/]*(.*),\1OpenImageIO-$OIIO_VERSION\2,x" -xf $_src.tar.gz
-      fi
     fi
 
     cd $_src
 
-    if [ $OIIO_USE_REPO == true ]; then
-      # XXX For now, always update from latest repo...
-      git pull origin master
-      # Stick to same rev as windows' libs...
-      git checkout $OIIO_SOURCE_REPO_UID
-      git reset --hard
-    fi
+    # XXX For now, always update from latest repo...
+    git pull origin master
+
+    # Stick to same rev as windows' libs...
+    git checkout $OIIO_REPO_UID
+    git reset --hard
 
     # Always refresh the whole build!
     if [ -d build ]; then
@@ -1267,7 +1228,6 @@ compile_OIIO() {
     if [ $_with_built_openexr == true ]; then
       cmake_d="$cmake_d -D ILMBASE_HOME=$INST/openexr"
       cmake_d="$cmake_d -D OPENEXR_HOME=$INST/openexr"
-      INFO "ILMBASE_HOME=$INST/openexr"
     fi
 
     # Optional tests and cmd tools
@@ -1398,7 +1358,7 @@ EOF
     cmake_d="$cmake_d -D CMAKE_INSTALL_PREFIX=$_inst"
     cmake_d="$cmake_d -D LLVM_ENABLE_FFI=ON"
     cmake_d="$cmake_d -D LLVM_TARGETS_TO_BUILD=X86"
-    cmake_d="$cmake_d -D LLVM_ENABLE_TERMINFO=OFF"
+    cmake_d="$cmake_d -D -DLLVM_ENABLE_TERMINFO=OFF"
 
     if [ -d $_FFI_INCLUDE_DIR ]; then
       cmake_d="$cmake_d -D FFI_INCLUDE_DIR=$_FFI_INCLUDE_DIR"
@@ -1444,15 +1404,14 @@ clean_OSL() {
 
 compile_OSL() {
   # To be changed each time we make edits that would modify the compiled result!
-  osl_magic=17
+  osl_magic=15
   _init_osl
 
   # Clean install if needed!
   magic_compile_check osl-$OSL_VERSION $osl_magic
-  #~ if [ $? -eq 1 -o $OSL_FORCE_REBUILD == true ]; then
-    #~ rm -Rf $_src  # XXX Radical, but not easy to change remote repo fully automatically
-    #~ clean_OSL
-  #~ fi
+  if [ $? -eq 1 -o $OSL_FORCE_REBUILD == true ]; then
+    clean_OSL
+  fi
 
   if [ ! -d $_inst ]; then
     INFO "Building OpenShadingLanguage-$OSL_VERSION"
@@ -1462,26 +1421,26 @@ compile_OSL() {
     if [ ! -d $_src ]; then
       mkdir -p $SRC
 
-      if [ $OSL_USE_REPO == true ]; then
-        git clone ${OSL_SOURCE_REPO[0]} $_src
-      else
-        download OSL_SOURCE[@] "$_src.tar.gz"
-        INFO "Unpacking OpenShadingLanguage-$OSL_VERSION"
-        tar -C $SRC --transform "s,(.*/?)OpenShadingLanguage-[^/]*(.*),\1OpenShadingLanguage-$OSL_VERSION\2,x" \
-            -xf $_src.tar.gz
-      fi
+#      download OSL_SOURCE[@] "$_src.tar.gz"
+
+#      INFO "Unpacking OpenShadingLanguage-$OSL_VERSION"
+#      tar -C $SRC --transform "s,(.*/?)OpenShadingLanguage-[^/]*(.*),\1OpenShadingLanguage-$OSL_VERSION\2,x" \
+#          -xf $_src.tar.gz
+
+      git clone ${OSL_SOURCE[0]} $_src
+
     fi
 
     cd $_src
 
-    if [ $OSL_USE_REPO == true ]; then
-      git remote set-url origin ${OSL_SOURCE_REPO[0]}
-      # XXX For now, always update from latest repo...
-      git pull --no-edit -X theirs origin $OSL_SOURCE_REPO_BRANCH
-      # Stick to same rev as windows' libs...
-      git checkout $OSL_SOURCE_REPO_UID
-      git reset --hard
-    fi
+    git remote set-url origin $OSL_SOURCE
+
+    # XXX For now, always update from latest repo...
+    git pull -X theirs origin master
+
+    # Stick to same rev as windows' libs...
+    git checkout $OSL_REPO_UID
+    git reset --hard
 
     # Always refresh the whole build!
     if [ -d build ]; then
@@ -1496,14 +1455,10 @@ compile_OSL() {
     cmake_d="$cmake_d -D STOP_ON_WARNING=OFF"
     cmake_d="$cmake_d -D BUILDSTATIC=OFF"
 
-    #~ cmake_d="$cmake_d -D ILMBASE_VERSION=$ILMBASE_VERSION"
+    cmake_d="$cmake_d -D ILMBASE_VERSION=$ILMBASE_VERSION"
 
     if [ $_with_built_openexr == true ]; then
-      INFO "ILMBASE_HOME=$INST/openexr"
       cmake_d="$cmake_d -D ILMBASE_HOME=$INST/openexr"
-      # XXX Temp workaround... sigh, ILMBase really messed the things up by defining their custom names ON by default :(
-      cmake_d="$cmake_d -D ILMBASE_CUSTOM=ON"
-      cmake_d="$cmake_d -D ILMBASE_CUSTOM_LIBRARIES='Half;Iex;Imath;IlmThread'"
     fi
 
     if [ -d $INST/boost ]; then
@@ -1517,7 +1472,7 @@ compile_OSL() {
     if [ ! -z $LLVM_VERSION_FOUND ]; then
       cmake_d="$cmake_d -D LLVM_VERSION=$LLVM_VERSION_FOUND"
       if [ -d $INST/llvm ]; then
-        cmake_d="$cmake_d -D LLVM_ROOT_DIR=$INST/llvm"
+        cmake_d="$cmake_d -D LLVM_DIRECTORY=$INST/llvm"
         cmake_d="$cmake_d -D LLVM_STATIC=ON"
       fi
     fi
@@ -1561,7 +1516,7 @@ clean_OpenCOLLADA() {
 
 compile_OpenCOLLADA() {
   # To be changed each time we make edits that would modify the compiled results!
-  opencollada_magic=9
+  opencollada_magic=8
   _init_opencollada
 
   # Clean install if needed!
@@ -1730,165 +1685,6 @@ compile_FFmpeg() {
   fi
 }
 
-#### Build ALEMBIC ####
-_init_alembic() {
-  _src=$SRC/Alembic-$ALEMBIC_VERSION
-  _hg=false
-  _inst=$INST/alembic-$ALEMBIC_VERSION
-  _inst_shortcut=$INST/alembic
-}
-
-clean_alembic() {
-  _init_alembic
-  _clean
-}
-
-compile_alembic() {
-  # To be changed each time we make edits that would modify the compiled result!
-  alembic_magic=1
-  _init_alembic
-
-  # Clean install if needed!
-  magic_compile_check alembic-$ALEMBIC_VERSION $alembic_magic
-  if [ $? -eq 1 -o $ALEMBIC_FORCE_REBUILD == true ]; then
-    clean_alembic
-  fi
-
-  if [ ! -d $_inst ]; then
-    INFO "Building Alembic-$ALEMBIC_VERSION"
-
-    prepare_opt
-
-    if [ ! -d $_src ]; then
-      mkdir -p $SRC
-      hg clone -u $ALEMBIC_REPO_UID $ALEMBIC_SOURCE $_src
-    fi
-
-    cd $_src
-
-    # XXX Ugly patching hack!
-    # Alembice cmake files are erratic, to say the least
-    # have to manually disable a bunch of crap here
-    cat << EOF | patch -p1
---- a/CMakeLists.txt	Mon Jul 28 10:09:21 2014 -0700
-+++ b/CMakeLists.txt	Thu Oct 16 15:03:27 2014 +0200
-@@ -57,9 +57,9 @@
-      ${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH} )
- SET( VERSION ${PROJECT_VERSION} )
- 
--SET( ALEMBIC_NO_TESTS FALSE )
--SET( ALEMBIC_NO_BOOTSTRAP FALSE )
--SET( ALEMBIC_NO_OPENGL FALSE )
-+SET( ALEMBIC_NO_TESTS TRUE )
-+SET( ALEMBIC_NO_BOOTSTRAP TRUE )
-+SET( ALEMBIC_NO_OPENGL TRUE )
- 
- MESSAGE(STATUS "CMAKE SYSTEM NAME = ${CMAKE_SYSTEM_NAME}" )
- 
-@@ -306,15 +306,15 @@
- ENDIF()
- 
- # Include PyAlembic stuff
--IF(DEFINED USE_PYALEMBIC AND NOT USE_PYALEMBIC)
--    MESSAGE(STATUS "Skipping Alembic Python bindings")
--ELSE()
--    MESSAGE(STATUS "About to include Python cmake files")
--    ADD_SUBDIRECTORY( python )
--ENDIF()
-+#IF(DEFINED USE_PYALEMBIC AND NOT USE_PYALEMBIC)
-+#    MESSAGE(STATUS "Skipping Alembic Python bindings")
-+#ELSE()
-+#    MESSAGE(STATUS "About to include Python cmake files")
-+#    ADD_SUBDIRECTORY( python )
-+#ENDIF()
- 
- # Example code not supported
--ADD_SUBDIRECTORY( examples )
-+#ADD_SUBDIRECTORY( examples )
- 
- # Uncomment to build python docs Makefile (requires Sphinx)
- # Run `make docs` from build root
-
-EOF
-
-    cat << EOF | patch -p1
---- a/lib/Alembic/Util/CMakeLists.txt	Mon Jul 28 10:09:21 2014 -0700
-+++ b/lib/Alembic/Util/CMakeLists.txt	Thu Oct 16 15:03:27 2014 +0200
-@@ -65,7 +65,7 @@
-          DESTINATION include/Alembic/Util
-          PERMISSIONS OWNER_READ GROUP_READ WORLD_READ )
- 
--IF( NOT ALEMBIC_NO_TESTS )
--	ADD_SUBDIRECTORY( Tests )
--ENDIF()
-+#IF( NOT ALEMBIC_NO_TESTS )
-+#	ADD_SUBDIRECTORY( Tests )
-+#ENDIF()
-
-EOF 
-
-    cat << EOF | patch -p1
---- a/python/CMakeLists.txt	Mon Jul 28 10:09:21 2014 -0700
-+++ b/python/CMakeLists.txt	Thu Oct 16 14:20:25 2014 +0200
-@@ -35,4 +35,4 @@
- 
- ADD_SUBDIRECTORY( PyAlembic )
- ADD_SUBDIRECTORY( PyAbcOpenGL )
--ADD_SUBDIRECTORY( examples )
-+#ADD_SUBDIRECTORY( examples )
-
-EOF
-
-    # Always refresh the whole build!
-    # XXX 'build' directory is included in Alembic sources, don't touch that
-    if [ -d blender_build ]; then
-      rm -rf blender_build
-    fi
-    mkdir blender_build
-    cd blender_build
-
-    # XXX Alembic cmake doesn't take these as options
-    # XXX Alembic creates a subfolder itself ... rather than fix their
-    # stupid build files, just expect this here by using $INST as prefix
-    export ALEMBIC_INSTALL_PREFIX=$INST
-
-    cmake_d="-D CMAKE_BUILD_TYPE=Release"
-    cmake_d="$cmake_d -D CMAKE_INSTALL_PREFIX=$INST"
-    cmake_d="$cmake_d -D BUILD_SHARED_LIBS=ON"
-    cmake_d="$cmake_d -D BUILD_STATIC_LIBS=ON"
-    cmake_d="$cmake_d -D USE_PYTHON=OFF"
-    cmake_d="$cmake_d -D USE_PYALEMBIC=OFF"
-    cmake_d="$cmakd_d -D ALEMBIC_PYTHON_INCLUDE_DIR=/use/include/python2.7" # XXX BAD
-    cmake_d="$cmakd_d -D ALEMBIC_PYTHON_LIBRARY=/use/lib/python2.7" # XXX BAD
-    cmake_d="$cmake_d -D USE_PYILMBASE=OFF"
-    cmake_d="$cmake_d -D ILMBASE_ROOT=$INST/openexr"
-    cmake_d="$cmake_d -D ALEMBIC_ILMBASE_HALF_LIB=$INST/openexr/lib/libHalf.la"
-    cmake_d="$cmake_d -D ALEMBIC_ILMBASE_IEX_LIB=$INST/openexr/lib/libIex-2_1.la"
-    cmake_d="$cmake_d -D ALEMBIC_ILMBASE_ILMTHREAD_LIB=$INST/openexr/lib/libIlmThread-2_1.la"
-    cmake_d="$cmake_d -D ALEMBIC_ILMBASE_IMATH_LIB=$INST/openexr/lib/libImath-2_1.la"
-
-    cmake $cmake_d ../
-
-    make -j$THREADS && make install
-    make clean
-
-    if [ -d $_inst ]; then
-      _create_inst_shortcut
-    else
-      ERROR "Alembic-$ALEMBIC_VERSION failed to compile, exiting"
-      exit 1
-    fi
-
-    magic_compile_set alembic-$ALEMBIC_VERSION $alembic_magic
-
-    cd $CWD
-    INFO "Done compiling Alembic-$ALEMBIC_VERSION!"
-  else
-    INFO "Own Alembic-$ALEMBIC_VERSION is up to date, nothing to do!"
-    INFO "If you want to force rebuild of this lib, use the --force-alembic option."
-  fi
-}
-
 
 #### Install on DEB-like ####
 get_package_version_DEB() {
@@ -1906,7 +1702,7 @@ check_package_DEB() {
 }
 
 check_package_installed_DEB() {
-  r=`dpkg-query -W -f='${Status}' $1 | grep -c "install ok"`
+  r=`dpkg -s $1 | grep -c '$1'`
 
   if [ $r -ge 1 ]; then
     return 0
@@ -1953,6 +1749,11 @@ install_DEB() {
   PRINT ""
   INFO "Installing dependencies for DEB-based distribution"
   PRINT ""
+  WARNING "Beware of recent Ubuntu/Debian!!!"
+  PRINT "Ubuntu 14.4 and Debian Jessie come with a default libyaml-cpp in 0.5 version, while their ocio package still"
+  PRINT "uses the 0.3 version. You have to use '--libyaml-cpp-ver=0.3' option (else Blender will builds with 0.5,"
+  PRINT "and break when using packaged ocio)..."
+  PRINT ""
   PRINT "`eval _echo "$COMMON_INFO"`"
   PRINT ""
 
@@ -1995,10 +1796,10 @@ install_DEB() {
   OGG_DEV="libogg-dev"
   THEORA_DEV="libtheora-dev"
 
-  _packages="gawk cmake cmake-curses-gui scons mercurial build-essential libjpeg-dev libpng-dev \
+  _packages="gawk cmake cmake-curses-gui scons build-essential libjpeg-dev libpng-dev \
              libfreetype6-dev libx11-dev libxi-dev wget libsqlite3-dev libbz2-dev \
              libncurses5-dev libssl-dev liblzma-dev libreadline-dev $OPENJPEG_DEV \
-             libopenal-dev libglew-dev libglewmx-dev yasm $THEORA_DEV $VORBIS_DEV $OGG_DEV \
+             libopenal-dev libglew-dev yasm $THEORA_DEV $VORBIS_DEV $OGG_DEV \
              libsdl1.2-dev libfftw3-dev patch bzip2 libxml2-dev libtinyxml-dev"
 
   OPENJPEG_USE=true
@@ -2066,7 +1867,7 @@ install_DEB() {
     # Only install jack if jack2 is not already installed!
     JACK="libjack-dev"
     JACK2="libjack-jackd2-dev"
-    check_package_installed_DEB $JACK2
+    check_package_installed_DEB JACK2
     if [ $? -eq 0 ]; then
       _packages="$_packages $JACK2"
     else
@@ -2175,8 +1976,7 @@ install_DEB() {
       if [ $? -eq 0 ]; then
         install_packages_DEB libboost-locale$boost_version-dev libboost-filesystem$boost_version-dev \
                              libboost-regex$boost_version-dev libboost-system$boost_version-dev \
-                             libboost-thread$boost_version-dev libboost-python$boost_version-dev \
-                             libboost-program-options$boost_version-dev libboost-wave$boost_version-dev
+                             libboost-thread$boost_version-dev
         clean_Boost
       else
         compile_Boost
@@ -2190,14 +1990,13 @@ install_DEB() {
   if $OCIO_SKIP; then
     WARNING "Skipping OpenColorIO installation, as requested..."
   else
-    # XXX Always force build of own OCIO, until linux distro guys update their package to default libyaml-cpp ver (0.5)!
-    #check_package_version_ge_DEB libopencolorio-dev $OCIO_VERSION_MIN
-    #if [ $? -eq 0 ]; then
-      #install_packages_DEB libopencolorio-dev
-      #clean_OCIO
-    #else
+    check_package_version_ge_DEB libopencolorio-dev $OCIO_VERSION_MIN
+    if [ $? -eq 0 ]; then
+      install_packages_DEB libopencolorio-dev
+      clean_OCIO
+    else
       compile_OCIO
-    #fi
+    fi
   fi
 
   PRINT ""
@@ -2309,14 +2108,6 @@ install_DEB() {
 #    fi
     compile_FFmpeg
   fi
-
-  if $ALEMBIC_SKIP; then
-    WARNING "Skipping Alembic installation, as requested..."
-  else
-    install_packages_DEB libhdf5-dev
-    install_packages_DEB libpython2.7-dev # XXX nasty hack, should be done better ...
-    compile_alembic
-  fi
 }
 
 
@@ -2479,7 +2270,7 @@ install_RPM() {
   OGG_DEV="libogg-devel"
   THEORA_DEV="libtheora-devel"
 
-  _packages="gcc gcc-c++ make scons libtiff-devel libjpeg-devel\
+  _packages="gcc gcc-c++ make scons libtiff-devel freetype-devel libjpeg-devel\
              libpng-devel libX11-devel libXi-devel wget ncurses-devel \
              readline-devel $OPENJPEG_DEV openal-soft-devel \
              glew-devel yasm $THEORA_DEV $VORBIS_DEV $OGG_DEV patch \
@@ -2493,7 +2284,7 @@ install_RPM() {
   if [ $RPM = "FEDORA" -o $RPM = "RHEL" ]; then
     OPENEXR_DEV="openexr-devel"
 
-    _packages="$_packages freetype-devel libsqlite3x-devel fftw-devel SDL-devel"
+    _packages="$_packages libsqlite3x-devel fftw-devel SDL-devel"
 
     if $WITH_ALL; then
       _packages="$_packages jack-audio-connection-kit-devel"
@@ -2531,7 +2322,7 @@ install_RPM() {
   elif [ $RPM = "SUSE" ]; then
     OPENEXR_DEV="libopenexr-devel"
 
-    _packages="$_packages cmake freetype2-devel sqlite3-devel fftw3-devel libSDL-devel"
+    _packages="$_packages cmake sqlite3-devel fftw3-devel libSDL-devel"
 
     PRINT ""
     install_packages_RPM $_packages
@@ -2633,14 +2424,13 @@ install_RPM() {
   if $OCIO_SKIP; then
     WARNING "Skipping OpenColorIO installation, as requested..."
   else
-    # XXX Always force build of own OCIO, until linux distro guys update their package to default libyaml-cpp ver (0.5)!
-    #check_package_version_ge_RPM OpenColorIO-devel $OCIO_VERSION_MIN
-    #if [ $? -eq 0 ]; then
-      #install_packages_RPM OpenColorIO-devel
-      #clean_OCIO
-    #else
+    check_package_version_ge_RPM OpenColorIO-devel $OCIO_VERSION_MIN
+    if [ $? -eq 0 ]; then
+      install_packages_RPM OpenColorIO-devel
+      clean_OCIO
+    else
       compile_OCIO
-    #fi
+    fi
   fi
 
   PRINT ""
@@ -2943,15 +2733,14 @@ install_ARCH() {
   if $OCIO_SKIP; then
     WARNING "Skipping OpenColorIO installation, as requested..."
   else
-    # XXX Always force build of own OCIO, until linux distro guys update their package to default libyaml-cpp ver (0.5)!
-    #check_package_version_ge_ARCH opencolorio $OCIO_VERSION_MIN
-    #if [ $? -eq 0 ]; then
-      #install_packages_ARCH opencolorio yaml-cpp tinyxml
-      #clean_OCIO
-    #else
+    check_package_version_ge_ARCH opencolorio $OCIO_VERSION_MIN
+    if [ $? -eq 0 ]; then
+      install_packages_ARCH opencolorio yaml-cpp tinyxml
+      clean_OCIO
+    else
       install_packages_ARCH yaml-cpp tinyxml
       compile_OCIO
-    #fi
+    fi
   fi
 
   PRINT ""
@@ -3189,7 +2978,7 @@ print_info() {
       _buildargs="$_buildargs $_1"
     fi
     if [ -d $INST/llvm ]; then
-      _1="-D LLVM_ROOT_DIR=$INST/llvm"
+      _1="-D LLVM_DIRECTORY=$INST/llvm"
       _2="-D LLVM_STATIC=ON"
       PRINT "  $_1"
       PRINT "  $_2"
@@ -3222,12 +3011,6 @@ print_info() {
     fi
   fi
 
-  if [ -d $INST/alembic ]; then
-    _1="-D ALEMBIC_ROOT_DIR=$INST/alembic"
-    PRINT "  $_1"
-    _buildargs="$_buildargs $_1"
-  fi
-
   PRINT ""
   PRINT "Or even simpler, just run (in your blender-source dir):"
   PRINT "  make -j$THREADS BUILD_CMAKE_ARGS=\"$_buildargs\""
@@ -3251,10 +3034,10 @@ print_info() {
     PRINT "BF_OPENEXR = '$INST/openexr'"
 
     _ilm_libs_ext=""
-    #~ version_ge $OPENEXR_VERSION "2.1.0"
-    #~ if [ $? -eq 0 ]; then
-      #~ _ilm_libs_ext=`echo $OPENEXR_VERSION | sed -r 's/([0-9]+)\.([0-9]+).*/-\1_\2/'`
-    #~ fi
+    version_ge $OPENEXR_VERSION "2.1.0"
+    if [ $? -eq 0 ]; then
+      _ilm_libs_ext=`echo $OPENEXR_VERSION | sed -r 's/([0-9]+)\.([0-9]+).*/-\1_\2/'`
+    fi
     PRINT "BF_OPENEXR_LIB = 'Half IlmImf$_ilm_libs_ext Iex$_ilm_libs_ext Imath$_ilm_libs_ext '"
     # BF_OPENEXR_LIB does not work, things like '-lIlmImf-2_1' do not suit ld.
     # For now, hack around!!!
@@ -3297,13 +3080,6 @@ print_info() {
     PRINT "BF_FFMPEG_LIB = 'avformat avcodec swscale avutil avdevice `print_info_ffmpeglink`'"
   fi
 
-  if [ "$ALEMBIC_SKIP" = false ]; then
-    PRINT "WITH_BF_ALEMBIC = True"
-    if [ -d $INST/alembic ]; then
-      PRINT "BF_ALEMBIC = '$INST/alembic'"
-    fi
-  fi
-
   if [ "$WITH_ALL" = false ]; then
     PRINT "WITH_BF_3DMOUSE = False"
   # No libspacenav in official arch repos...
@@ -3332,9 +3108,9 @@ else
   exit 1
 fi
 
-print_info | tee $INFO_PATH/BUILD_NOTES.txt
+print_info | tee BUILD_NOTES.txt
 PRINT ""
-PRINT "This information has been written to $INFO_PATH/BUILD_NOTES.txt"
+PRINT "This information has been written to BUILD_NOTES.txt"
 PRINT ""
 
 # Switch back to user language.

build_files/buildbot/config/user-config-cuda-glibc211-i686.py

@@ -2,4 +2,4 @@ BF_BUILDDIR = '../blender-build/linux-glibc211-i686'
 BF_INSTALLDIR = '../blender-install/linux-glibc211-i686'
 BF_NUMJOBS = 1
 
-BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50', 'sm_52']
+BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50']

build_files/buildbot/config/user-config-cuda-glibc211-x86_64.py

@@ -2,4 +2,4 @@ BF_BUILDDIR = '../blender-build/linux-glibc211-x86_64'
 BF_INSTALLDIR = '../blender-install/linux-glibc211-x86_64'
 BF_NUMJOBS = 1
 
-BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50', 'sm_52']
+BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50']

build_files/buildbot/config/user-config-glibc211-i686.py

@@ -22,7 +22,7 @@ BF_OPENCOLLADA_LIB_STATIC = '${BF_OPENCOLLADA}/lib/libOpenCOLLADAStreamWriter.a
     '${BF_OPENCOLLADA}/lib/libOpenCOLLADAFramework.a ' + \
     '${BF_OPENCOLLADA}/lib/libOpenCOLLADABaseUtils.a ' + \
     '${BF_OPENCOLLADA}/lib/libGeneratedSaxParser.a '  + \
-    '${BF_OPENCOLLADA}/lib/libMathMLSolver.a ' + \
+    '${BF_OPENCOLLADA}/lib/libUTF.a ${BF_OPENCOLLADA}/lib/libMathMLSolver.a ' + \
     '${BF_OPENCOLLADA}/lib/libbuffer.a ${BF_OPENCOLLADA}/lib/libftoa.a ' + \
     '/usr/lib/libxml2.a /usr/lib/libexpat.a /usr/lib/libpcre.a'
 BF_OPENCOLLADA_LIBPATH = '${BF_OPENCOLLADA}/lib /home/sources/staticlibs/lib64'
@@ -49,7 +49,7 @@ BF_CXX_LIB_STATIC = '/usr/lib/gcc/i486-linux-gnu/4.7.1/libstdc++.a'
 WITH_BF_OPENAL = True
 WITH_BF_STATICOPENAL = True
 BF_OPENAL = '/opt/lib/openal'
-BF_OPENAL_LIB_STATIC = '/opt/lib/openal/lib/libopenal.a /opt/lib/openal/lib/libcommon.a'
+BF_OPENAL_LIB_STATIC = '/opt/lib/openal/lib/libopenal.a'
 
 WITH_BF_GETTEXT_STATIC = True
 
@@ -79,8 +79,6 @@ WITH_BF_STATICZLIB = True
 BF_ZLIB_LIB_STATIC = '${BF_ZLIB}/lib/libz.a'
 
 WITH_BF_SDL = True
-WITH_BF_SDL_DYNLOAD = True
-
 WITH_BF_OGG = True
 
 WITH_BF_OPENMP = True
@@ -124,22 +122,20 @@ BF_OIIO_INC = '${BF_OIIO}/include'
 BF_OIIO_LIB_STATIC = '${BF_OIIO_LIBPATH}/libOpenImageIO.a ${BF_OPENEXR}/lib/libIlmImf.a ${BF_JPEG}/lib/libjpeg.a'
 BF_OIIO_LIBPATH = '${BF_OIIO}/lib'
 
-BF_IS_NEW_OSL = False
 WITH_BF_CYCLES_OSL = True
-WITH_BF_STATICOSL = BF_IS_NEW_OSL
+WITH_BF_STATICOSL = False
 BF_OSL = '/opt/lib/osl'
 BF_OSL_INC = '${BF_OSL}/include'
 # note oslexec would passed via program linkflags, which is needed to
 # make llvm happy with osl_allocate_closure_component
 BF_OSL_LIB = 'oslcomp oslexec oslquery'
-BF_OSL_LIB_STATIC = '${BF_OSL}/lib/liboslcomp.a ${BF_OSL}/lib/liboslexec.a ${BF_OSL}/lib/liboslquery.a'
 BF_OSL_LIBPATH = '${BF_OSL}/lib'
 BF_OSL_COMPILER = '${BF_OSL}/bin/oslc'
 
 WITH_BF_LLVM = True
 WITH_BF_STATICLLVM = False
-BF_LLVM = '/opt/lib/llvm-3.4.2'
-BF_LLVM_LIB = 'LLVMBitReader LLVMJIT LLVMipo LLVMVectorize LLVMBitWriter LLVMX86CodeGen LLVMX86Desc LLVMObject LLVMX86Info LLVMX86AsmPrinter ' + \
+BF_LLVM = '/opt/lib/llvm-3.1'
+BF_LLVM_LIB = 'LLVMBitReader LLVMJIT LLVMipo LLVMVectorize LLVMBitWriter LLVMX86CodeGen LLVMX86Desc LLVMX86Info LLVMX86AsmPrinter ' + \
     'LLVMX86Utils LLVMSelectionDAG LLVMCodeGen LLVMScalarOpts LLVMInstCombine LLVMTransformUtils LLVMipa LLVMAnalysis LLVMExecutionEngine ' + \
     'LLVMTarget LLVMMC LLVMCore LLVMSupport'
 BF_LLVM_LIBPATH = '${BF_LLVM}/lib'
@@ -159,31 +155,13 @@ BF_BOOST_INC = '${BF_BOOST}/include'
 BF_BOOST_LIB_STATIC = '${BF_BOOST_LIBPATH}/libboost_filesystem.a ${BF_BOOST_LIBPATH}/libboost_date_time.a ' + \
     '${BF_BOOST_LIBPATH}/libboost_regex.a ${BF_BOOST_LIBPATH}/libboost_locale.a ${BF_BOOST_LIBPATH}/libboost_system.a \
     ${BF_BOOST_LIBPATH}/libboost_thread.a'
-if BF_IS_NEW_OSL:
-    BF_BOOST_LIB_STATIC += ' ${BF_BOOST_LIBPATH}/libboost_wave.a'
 BF_BOOST_LIBPATH = '${BF_BOOST}/lib'
 
 # Ocean Simulation
 WITH_BF_OCEANSIM = True
 
-# Alembic
-WITH_BF_HDF5 = False
-WITH_BF_ALEMBIC = True
-WITH_BF_STATICALEMBIC = True
-BF_ALEMBIC = '/opt/lib/alembic'
-BF_ALEMBIC_INC = '${BF_ALEMBIC}/include'
-BF_ALEMBIC_LIBPATH = '${BF_ALEMBIC}/lib/static'
-BF_ALEMBIC_LIB_STATIC = '${BF_ALEMBIC_LIBPATH}/libAlembicAbcGeom.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbc.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicAbcCollection.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreFactory.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreOgawa.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcMaterial.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicOgawa.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreAbstract.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicUtil.a'
-
 # Compilation and optimization
 BF_DEBUG = False
 REL_CCFLAGS = ['-DNDEBUG', '-O2', '-msse', '-msse2']  # C & C++
 PLATFORM_LINKFLAGS = ['-lrt']
-if BF_IS_NEW_OSL:
-    BF_PROGRAM_LINKFLAGS = ['-Wl,--version-script=source/creator/blender.map']
-else:
-  BF_PROGRAM_LINKFLAGS = ['-Wl,--whole-archive', '-loslexec', '-Wl,--no-whole-archive', '-Wl,--version-script=source/creator/blender.map']
+BF_PROGRAM_LINKFLAGS = ['-Wl,--whole-archive', '-loslexec', '-Wl,--no-whole-archive', '-Wl,--version-script=source/creator/blender.map']

build_files/buildbot/config/user-config-glibc211-x86_64.py

@@ -22,7 +22,7 @@ BF_OPENCOLLADA_LIB_STATIC = '${BF_OPENCOLLADA}/lib/libOpenCOLLADAStreamWriter.a
     '${BF_OPENCOLLADA}/lib/libOpenCOLLADAFramework.a ' + \
     '${BF_OPENCOLLADA}/lib/libOpenCOLLADABaseUtils.a ' + \
     '${BF_OPENCOLLADA}/lib/libGeneratedSaxParser.a '  + \
-    '${BF_OPENCOLLADA}/lib/libMathMLSolver.a ' + \
+    '${BF_OPENCOLLADA}/lib/libUTF.a ${BF_OPENCOLLADA}/lib/libMathMLSolver.a ' + \
     '${BF_OPENCOLLADA}/lib/libbuffer.a ${BF_OPENCOLLADA}/lib/libftoa.a ' + \
     '/usr/lib/libxml2.a /usr/lib/libexpat.a /usr/lib/libpcre.a'
 BF_OPENCOLLADA_LIBPATH = '${BF_OPENCOLLADA}/lib /home/sources/staticlibs/lib64'
@@ -49,7 +49,7 @@ BF_CXX_LIB_STATIC = '/usr/lib/gcc/x86_64-linux-gnu/4.7.1/libstdc++.a'
 WITH_BF_OPENAL = True
 WITH_BF_STATICOPENAL = True
 BF_OPENAL = '/opt/lib/openal'
-BF_OPENAL_LIB_STATIC = '/opt/lib/openal/lib/libopenal.a /opt/lib/openal/lib/libcommon.a'
+BF_OPENAL_LIB_STATIC = '/opt/lib/openal/lib/libopenal.a'
 
 WITH_BF_GETTEXT_STATIC = True
 
@@ -79,8 +79,6 @@ WITH_BF_STATICZLIB = True
 BF_ZLIB_LIB_STATIC = '${BF_ZLIB}/lib/libz.a'
 
 WITH_BF_SDL = True
-WITH_BF_SDL_DYNLOAD = True
-
 WITH_BF_OGG = True
 
 WITH_BF_OPENMP = True
@@ -124,22 +122,20 @@ BF_OIIO_INC = '${BF_OIIO}/include'
 BF_OIIO_LIB_STATIC = '${BF_OIIO_LIBPATH}/libOpenImageIO.a ${BF_OPENEXR}/lib/libIlmImf.a ${BF_JPEG}/lib/libjpeg.a'
 BF_OIIO_LIBPATH = '${BF_OIIO}/lib'
 
-BF_IS_NEW_OSL = False
 WITH_BF_CYCLES_OSL = True
-WITH_BF_STATICOSL = BF_IS_NEW_OSL
+WITH_BF_STATICOSL = False
 BF_OSL = '/opt/lib/osl'
 BF_OSL_INC = '${BF_OSL}/include'
 # note oslexec would passed via program linkflags, which is needed to
 # make llvm happy with osl_allocate_closure_component
 BF_OSL_LIB = 'oslcomp oslexec oslquery'
-BF_OSL_LIB_STATIC = '${BF_OSL}/lib/liboslcomp.a ${BF_OSL}/lib/liboslexec.a ${BF_OSL}/lib/liboslquery.a'
 BF_OSL_LIBPATH = '${BF_OSL}/lib'
 BF_OSL_COMPILER = '${BF_OSL}/bin/oslc'
 
 WITH_BF_LLVM = True
 WITH_BF_STATICLLVM = False
-BF_LLVM = '/opt/lib/llvm-3.4.2'
-BF_LLVM_LIB = 'LLVMBitReader LLVMJIT LLVMipo LLVMVectorize LLVMBitWriter LLVMX86CodeGen LLVMX86Desc LLVMObject LLVMX86Info LLVMX86AsmPrinter ' + \
+BF_LLVM = '/opt/lib/llvm-3.1'
+BF_LLVM_LIB = 'LLVMBitReader LLVMJIT LLVMipo LLVMVectorize LLVMBitWriter LLVMX86CodeGen LLVMX86Desc LLVMX86Info LLVMX86AsmPrinter ' + \
     'LLVMX86Utils LLVMSelectionDAG LLVMCodeGen LLVMScalarOpts LLVMInstCombine LLVMTransformUtils LLVMipa LLVMAnalysis LLVMExecutionEngine ' + \
     'LLVMTarget LLVMMC LLVMCore LLVMSupport'
 BF_LLVM_LIBPATH = '${BF_LLVM}/lib'
@@ -159,31 +155,13 @@ BF_BOOST_INC = '${BF_BOOST}/include'
 BF_BOOST_LIB_STATIC = '${BF_BOOST_LIBPATH}/libboost_filesystem.a ${BF_BOOST_LIBPATH}/libboost_date_time.a ' + \
     '${BF_BOOST_LIBPATH}/libboost_regex.a ${BF_BOOST_LIBPATH}/libboost_locale.a ${BF_BOOST_LIBPATH}/libboost_system.a \
     ${BF_BOOST_LIBPATH}/libboost_thread.a'
-if BF_IS_NEW_OSL:
-    BF_BOOST_LIB_STATIC += ' ${BF_BOOST_LIBPATH}/libboost_wave.a'
 BF_BOOST_LIBPATH = '${BF_BOOST}/lib'
 
 # Ocean Simulation
 WITH_BF_OCEANSIM = True
 
-# Alembic
-WITH_BF_HDF5 = False
-WITH_BF_ALEMBIC = True
-WITH_BF_STATICALEMBIC = True
-BF_ALEMBIC = '/opt/lib/alembic'
-BF_ALEMBIC_INC = '${BF_ALEMBIC}/include'
-BF_ALEMBIC_LIBPATH = '${BF_ALEMBIC}/lib/static'
-BF_ALEMBIC_LIB_STATIC = '${BF_ALEMBIC_LIBPATH}/libAlembicAbcGeom.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbc.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicAbcCollection.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreFactory.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreOgawa.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcMaterial.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicOgawa.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreAbstract.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicUtil.a'
-
 # Compilation and optimization
 BF_DEBUG = False
 REL_CCFLAGS = ['-DNDEBUG', '-O2', '-msse', '-msse2']  # C & C++
 PLATFORM_LINKFLAGS = ['-lrt']
-if BF_IS_NEW_OSL:
-    BF_PROGRAM_LINKFLAGS = ['-Wl,--version-script=source/creator/blender.map']
-else:
-    BF_PROGRAM_LINKFLAGS = ['-Wl,--whole-archive', '-loslexec', '-Wl,--no-whole-archive', '-Wl,--version-script=source/creator/blender.map']
+BF_PROGRAM_LINKFLAGS = ['-Wl,--whole-archive', '-loslexec', '-Wl,--no-whole-archive', '-Wl,--version-script=source/creator/blender.map']

build_files/buildbot/config/user-config-mac-i386.py

@@ -3,7 +3,3 @@ MACOSX_ARCHITECTURE = 'i386' # valid archs: ppc, i386, ppc64, x86_64
 
 WITH_BF_CYCLES_CUDA_BINARIES = True
 
-WITH_BF_CYCLES_OSL = False # OSL never worked on OSX 32bit !
-
-WITH_BF_COLLADA = False # we drop 32bit, newest collada is only x86_64 !
-

build_files/buildbot/config/user-config-mac-x86_64.py

@@ -1,6 +1,5 @@
-CC = "../lib/darwin-9.x.universal/clang-omp-3.5/bin/clang"
-CXX = "../lib/darwin-9.x.universal/clang-omp-3.5/bin/clang++"
 
 MACOSX_ARCHITECTURE = 'x86_64' # valid archs: ppc, i386, ppc64, x86_64
 
 WITH_BF_CYCLES_CUDA_BINARIES = True
+

build_files/buildbot/config/user-config-player-glibc211-i686.py

@@ -34,7 +34,7 @@ BF_CXX_LIB_STATIC = '/usr/lib/gcc/i486-linux-gnu/4.7.1/libstdc++.a'
 WITH_BF_OPENAL = True
 WITH_BF_STATICOPENAL = True
 BF_OPENAL = '/opt/lib/openal'
-BF_OPENAL_LIB_STATIC = '/opt/lib/openal/lib/libopenal.a /opt/lib/openal/lib/libcommon.a'
+BF_OPENAL_LIB_STATIC = '/opt/lib/openal/lib/libopenal.a'
 
 WITH_BF_GETTEXT_STATIC = True
 
@@ -64,8 +64,6 @@ WITH_BF_STATICZLIB = True
 BF_ZLIB_LIB_STATIC = '${BF_ZLIB}/lib/libz.a'
 
 WITH_BF_SDL = True
-WITH_BF_SDL_DYNLOAD = True
-
 WITH_BF_OGG = False
 
 WITH_BF_OPENMP = True
@@ -120,19 +118,6 @@ WITH_BF_FFTW3 = True
 WITH_BF_STATICFFTW3 = True
 WITH_BF_OCEANSIM = True
 
-# Alembic
-WITH_BF_HDF5 = False
-WITH_BF_ALEMBIC = True
-WITH_BF_STATICALEMBIC = True
-BF_ALEMBIC = '/opt/lib/alembic'
-BF_ALEMBIC_INC = '${BF_ALEMBIC}/include'
-BF_ALEMBIC_LIBPATH = '${BF_ALEMBIC}/lib/static'
-BF_ALEMBIC_LIB_STATIC = '${BF_ALEMBIC_LIBPATH}/libAlembicAbcGeom.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbc.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicAbcCollection.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreFactory.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreOgawa.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcMaterial.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicOgawa.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreAbstract.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicUtil.a'
-
 # Compilation and optimization
 BF_DEBUG = False
 REL_CCFLAGS = ['-DNDEBUG', '-O2', '-msse', '-msse2']  # C & C++

build_files/buildbot/config/user-config-player-glibc211-x86_64.py

@@ -34,7 +34,7 @@ BF_CXX_LIB_STATIC = '/usr/lib/gcc/x86_64-linux-gnu/4.7.1/libstdc++.a'
 WITH_BF_OPENAL = True
 WITH_BF_STATICOPENAL = True
 BF_OPENAL = '/opt/lib/openal'
-BF_OPENAL_LIB_STATIC = '/opt/lib/openal/lib/libopenal.a /opt/lib/openal/lib/libcommon.a'
+BF_OPENAL_LIB_STATIC = '/opt/lib/openal/lib/libopenal.a'
 
 WITH_BF_GETTEXT_STATIC = True
 
@@ -64,8 +64,6 @@ WITH_BF_STATICZLIB = True
 BF_ZLIB_LIB_STATIC = '${BF_ZLIB}/lib/libz.a'
 
 WITH_BF_SDL = True
-WITH_BF_SDL_DYNLOAD = True
-
 WITH_BF_OGG = False
 
 WITH_BF_OPENMP = True
@@ -120,19 +118,6 @@ WITH_BF_FFTW3 = True
 WITH_BF_STATICFFTW3 = True
 WITH_BF_OCEANSIM = True
 
-# Alembic
-WITH_BF_HDF5 = False
-WITH_BF_ALEMBIC = True
-WITH_BF_STATICALEMBIC = True
-BF_ALEMBIC = '/opt/lib/alembic'
-BF_ALEMBIC_INC = '${BF_ALEMBIC}/include'
-BF_ALEMBIC_LIBPATH = '${BF_ALEMBIC}/lib/static'
-BF_ALEMBIC_LIB_STATIC = '${BF_ALEMBIC_LIBPATH}/libAlembicAbcGeom.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbc.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicAbcCollection.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreFactory.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreOgawa.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcMaterial.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicOgawa.a ${BF_ALEMBIC_LIBPATH}/libAlembicAbcCoreAbstract.a ' + \
-    '${BF_ALEMBIC_LIBPATH}/libAlembicUtil.a'
-
 # Compilation and optimization
 BF_DEBUG = False
 REL_CCFLAGS = ['-DNDEBUG', '-O2', '-msse', '-msse2']  # C & C++

build_files/buildbot/master.cfg

@@ -3,58 +3,6 @@
 
 # <pep8 compliant>
 
-# List of the branches being built automatically overnight
-NIGHT_SCHEDULE_BRANCHES = [None, "gooseberry"]
-
-# List of the branches available for force build
-FORCE_SCHEDULE_BRANCHES = ["master", "gooseberry", "experimental-build"]
-
-"""
-Stock Twisted directory lister doesn't provide any information about last file
-modification time, we hack the class a bit in order to have such functionaliity
-:)
-"""
-
-from buildbot.status.web.base import DirectoryLister
-
-
-def get_files_and_directories(self, directory):
-    from twisted.web.static import (getTypeAndEncoding,
-                                    formatFileSize)
-    import urllib
-    import cgi
-    import time
-    import os
-    files = []
-    dirs = []
-    for path in directory:
-        url = urllib.quote(path, "/")
-        escapedPath = cgi.escape(path)
-        lastmodified = time.ctime(os.path.getmtime(
-            os.path.join(self.path, path)))
-        if os.path.isdir(os.path.join(self.path, path)):
-            url = url + '/'
-            dirs.append({'text': escapedPath + "/", 'href': url,
-                         'size': '', 'type': '[Directory]',
-                         'encoding': '',
-                         'lastmodified': lastmodified})
-        else:
-            mimetype, encoding = getTypeAndEncoding(path, self.contentTypes,
-                                                    self.contentEncodings,
-                                                    self.defaultType)
-            try:
-                size = os.stat(os.path.join(self.path, path)).st_size
-            except OSError:
-                continue
-            files.append({
-                'text': escapedPath, "href": url,
-                'type': '[%s]' % mimetype,
-                'encoding': (encoding and '[%s]' % encoding or ''),
-                'size': formatFileSize(size),
-                'lastmodified': lastmodified})
-    return dirs, files
-DirectoryLister._getFilesAndDirectories = get_files_and_directories
-
 # Dictionary that the buildmaster pays attention to.
 c = BuildmasterConfig = {}
 
@@ -84,89 +32,51 @@ c['change_source'] = GitPoller(
        'git://git.blender.org/blender.git',
        pollinterval=1200)
 
-
-# CODEBASES
-#
-# Allow to controll separately things like branches for each repo and submodules.
-
-all_repositories = {
-    r'git://git.blender.org/blender.git': 'blender',
-    r'git://git.blender.org/blender-translations.git': 'blender-translations',
-    r'git://git.blender.org/blender-addons.git': 'blender-addons',
-    r'git://git.blender.org/blender-addons-contrib.git': 'blender-addons-contrib',
-    r'git://git.blender.org/scons.git': 'scons',
-    r'https://svn.blender.org/svnroot/bf-blender/': 'lib svn',
-}
-
-
-def codebaseGenerator(chdict):
-    return all_repositories[chdict['repository']]
-
-c['codebaseGenerator'] = codebaseGenerator
-
-
 # SCHEDULERS
 #
 # Decide how to react to incoming changes.
 
 # from buildbot.scheduler import Scheduler
-from buildbot.schedulers import timed, forcesched
+from buildbot.schedulers import timed
 
 c['schedulers'] = []
 
-
-def schedule_force_build(name):
-    c['schedulers'].append(forcesched.ForceScheduler(name='force ' + name,
-        builderNames=[name],
-        codebases=[forcesched.CodebaseParameter(
-                codebase="blender",
-                branch=forcesched.ChoiceStringParameter(
-                    name="branch", choices=FORCE_SCHEDULE_BRANCHES, default="master"),
-                # Do not hide revision, can be handy!
-                repository=forcesched.FixedParameter(name="repository", default="", hide=True),
-                project=forcesched.FixedParameter(name="project", default="", hide=True)),
-            # For now, hide other codebases.
-            forcesched.CodebaseParameter(hide=True, codebase="blender-translations"),
-            forcesched.CodebaseParameter(hide=True, codebase="blender-addons"),
-            forcesched.CodebaseParameter(hide=True, codebase="blender-addons-contrib"),
-            forcesched.CodebaseParameter(hide=True, codebase="scons"),
-            forcesched.CodebaseParameter(hide=True, codebase="lib svn")],
-        properties=[]))
-
-
 def schedule_build(name, hour, minute=0):
-    for current_branch in NIGHT_SCHEDULE_BRANCHES:
-        scheduler_name = "nightly " + name
-        if current_branch:
-            scheduler_name += ' ' + current_branch
-        c['schedulers'].append(timed.Nightly(name=scheduler_name,
-            codebases={
-                "blender": {"repository": ""},
-                "blender-translations": {"repository": "", "branch": "master"},
-                "blender-addons": {"repository": "", "branch": "master"},
-                "blender-addons-contrib": {"repository": "", "branch": "master"},
-                "scons": {"repository": "", "branch": "master"},
-                "lib svn": {"repository": "", "branch": "trunk"}},
-            branch=current_branch,
-            builderNames=[name],
-            hour=hour,
-            minute=minute))
+    c['schedulers'].append(timed.Nightly(name='nightly ' + name,
+        builderNames=[name],
+        hour=hour,
+        minute=minute))
 
+"""
+schedule_cycle = 4
+
+for i in range(0, schedule_cycle):
+    names = []
+    for j in range(0, len(buildernames)):
+        if j % schedule_cycle == i:
+            names += [buildernames[j]]
+
+    print(names)
+    c['schedulers'].append(timed.Nightly(name='nightly' + str(i),
+        builderNames=names,
+        hour=3+i,
+        minute=0))
+"""
 
 # BUILDERS
 #
-# The 'builders' list defines the Builders, which tell Buildbot how to
-# perform a build: what steps, and which slaves can execute them.
-# Note that any particular build will only take place on one slave.
+# The 'builders' list defines the Builders, which tell Buildbot how to perform a build:
+# what steps, and which slaves can execute them.  Note that any particular build will
+# only take place on one slave.
 
 from buildbot.process.factory import BuildFactory
-from buildbot.process.properties import Interpolate
 from buildbot.steps.source import SVN
 from buildbot.steps.source import Git
 from buildbot.steps.shell import ShellCommand
 from buildbot.steps.shell import Compile
 from buildbot.steps.shell import Test
 from buildbot.steps.transfer import FileUpload
+# from buildbot.steps.transfer import FileDownload
 from buildbot.steps.master import MasterShellCommand
 from buildbot.config import BuilderConfig
 
@@ -176,8 +86,7 @@ c['builders'] = []
 buildernames = []
 
 
-def add_builder(c, name, libdir, factory, branch='',
-                rsync=False, hour=3, minute=0):
+def add_builder(c, name, libdir, factory, branch='', rsync=False, hour=3, minute=0):
     slavenames = []
 
     for slave in master_private.slaves:
@@ -186,69 +95,31 @@ def add_builder(c, name, libdir, factory, branch='',
 
     if len(slavenames) > 0:
         f = factory(name, libdir, branch, rsync)
-        c['builders'].append(BuilderConfig(name=name,
-                                           slavenames=slavenames,
-                                           factory=f,
-                                           category='blender'))
+        c['builders'].append(BuilderConfig(name=name, slavenames=slavenames, factory=f, category='blender'))
         buildernames.append(name)
 
         schedule_build(name, hour, minute)
-        schedule_force_build(name)
 
 # common steps
 
-
 def git_submodule_step(submodule):
-    return Git(name=submodule + '.git',
-               repourl='git://git.blender.org/' + submodule + '.git',
-               mode='update',
-               codebase=submodule,
-               workdir=submodule + '.git')
-
+    return Git(name=submodule+'.git', repourl='git://git.blender.org/' + submodule + '.git', mode='update', workdir=submodule + '.git')
 
 def git_step(branch=''):
     if branch:
-        return Git(name='blender.git',
-                   repourl='git://git.blender.org/blender.git',
-                   mode='update',
-                   branch=branch,
-                   codebase='blender',
-                   workdir='blender.git',
-                   submodules=True)
+        return Git(name='blender.git', repourl='git://git.blender.org/blender.git', mode='update', branch=branch, workdir='blender.git', submodules=True)
     else:
-        return Git(name='blender.git',
-                   repourl='git://git.blender.org/blender.git',
-                   mode='update',
-                   codebase='blender',
-                   workdir='blender.git',
-                   submodules=True)
-
+        return Git(name='blender.git', repourl='git://git.blender.org/blender.git', mode='update', workdir='blender.git', submodules=True)
 
 def git_submodules_update():
-    command = ['git', 'submodule', 'foreach', '--recursive',
-               'git', 'pull', 'origin', 'master']
-    return ShellCommand(name='Submodules Update',
-                        command=command,
-                        description='updating',
-                        descriptionDone='up to date',
-                        workdir='blender.git')
-
+    command = ['git', 'submodule', 'foreach', '--recursive', 'git', 'pull', 'origin', 'master']
+    return ShellCommand(name='Submodules Update', command=command, description='updating', descriptionDone='up to date', workdir='blender.git')
 
 def lib_svn_step(dir):
-    return SVN(name='lib svn',
-               baseURL='https://svn.blender.org/svnroot/bf-blender/%%BRANCH%%/lib/' + dir,
-               codebase='lib svn',
-               mode='update',
-               defaultBranch='trunk',
-               workdir='lib/' + dir)
-
+    return SVN(name='lib svn', baseURL='https://svn.blender.org/svnroot/bf-blender/%%BRANCH%%/lib/' + dir, mode='update', defaultBranch='trunk', workdir='lib/' + dir)
 
 def rsync_step(id, branch, rsync_script):
-    return ShellCommand(name='rsync',
-                        command=['python', rsync_script, id, branch],
-                        description='uploading',
-                        descriptionDone='uploaded',
-                        workdir='install')
+    return ShellCommand(name='rsync', command=['python', rsync_script, id, branch], description='uploading', descriptionDone='uploaded', workdir='install')
 
 # generic builder
 
@@ -265,38 +136,21 @@ def generic_builder(id, libdir='', branch='', rsync=False):
     if libdir != '':
         f.addStep(lib_svn_step(libdir))
 
-    for submodule in ('blender-translations',
-                      'blender-addons',
-                      'blender-addons-contrib',
-                      'scons'):
+    for submodule in ('blender-translations', 'blender-addons', 'blender-addons-contrib', 'scons'):
         f.addStep(git_submodule_step(submodule))
-
     f.addStep(git_step(branch))
     f.addStep(git_submodules_update())
 
     f.addStep(Compile(command=['python', compile_script, id], timeout=3600))
     f.addStep(Test(command=['python', test_script, id]))
-    f.addStep(ShellCommand(name='package',
-                           command=['python', pack_script, id, branch or Interpolate('%(src:blender:branch)s')],
-                           description='packaging',
-                           descriptionDone='packaged'))
+    f.addStep(ShellCommand(name='package', command=['python', pack_script, id, branch], description='packaging', descriptionDone='packaged'))
     if rsync:
         f.addStep(rsync_step(id, branch, rsync_script))
     elif id.find('cmake') != -1:
-        f.addStep(FileUpload(name='upload',
-                             slavesrc='buildbot_upload.zip',
-                             masterdest=filename,
-                             maxsize=150 * 1024 * 1024))
+        f.addStep(FileUpload(name='upload', slavesrc='buildbot_upload.zip', masterdest=filename, maxsize=150 * 1024 * 1024))
     else:
-        f.addStep(FileUpload(name='upload',
-                             slavesrc='buildbot_upload.zip',
-                             masterdest=filename,
-                             maxsize=150 * 1024 * 1024,
-                             workdir='install'))
-    f.addStep(MasterShellCommand(name='unpack',
-                                 command=['python', unpack_script, filename],
-                                 description='unpacking',
-                                 descriptionDone='unpacked'))
+        f.addStep(FileUpload(name='upload', slavesrc='buildbot_upload.zip', masterdest=filename, maxsize=150 * 1024 * 1024, workdir='install'))
+    f.addStep(MasterShellCommand(name='unpack', command=['python', unpack_script, filename], description='unpacking', descriptionDone='unpacked'))
     return f
 
 # builders
@@ -305,10 +159,12 @@ add_builder(c, 'mac_x86_64_10_6_scons', 'darwin-9.x.universal', generic_builder,
 add_builder(c, 'mac_i386_10_6_scons', 'darwin-9.x.universal', generic_builder, hour=11)
 add_builder(c, 'linux_glibc211_i386_scons', '', generic_builder, hour=1)
 add_builder(c, 'linux_glibc211_x86_64_scons', '', generic_builder, hour=2)
+add_builder(c, 'win32_scons', 'windows', generic_builder, hour=1)
+add_builder(c, 'win64_scons', 'win64', generic_builder, hour=2)
+#add_builder(c, 'win32_scons_vc2012', 'windows_vc11', generic_builder, hour=1)
+#add_builder(c, 'win64_scons_vc2012', 'win64_vc11', generic_builder, hour=2)
 add_builder(c, 'win32_scons_vc2013', 'windows_vc12', generic_builder, hour=1)
 add_builder(c, 'win64_scons_vc2013', 'win64_vc12', generic_builder, hour=2)
-add_builder(c, 'win32_cmake_vc2013', 'windows_vc12', generic_builder, hour=3)
-add_builder(c, 'win64_cmake_vc2013', 'win64_vc12', generic_builder, hour=4)
 #add_builder(c, 'mingw_win32_scons', 'mingw32', generic_builder, hour=4)
 add_builder(c, 'mingw_win64_scons', 'mingw64', generic_builder, hour=3)
 #add_builder(c, 'freebsd_i386_cmake', '', generic_builder, hour=1)
@@ -339,16 +195,15 @@ authz_cfg = authz.Authz(
     # change any of these to True to enable; see the manual for more
     # options
     gracefulShutdown=False,
-    forceBuild=True,  # use this to test your slave once it is set up
+    forceBuild='auth',  # use this to test your slave once it is set up
     forceAllBuilds=False,
     pingBuilder=False,
-    stopBuild=True,
+    stopBuild='auth',
     stopAllBuilds=False,
-    cancelPendingBuild=True,
+    cancelPendingBuild='auth',
 )
 
 c['status'].append(html.WebStatus(http_port=8010, authz=authz_cfg))
-#c['status'].append(html.WebStatus(http_port=8010))
 
 # PROJECT IDENTITY
 

build_files/buildbot/master_unpack.py

@@ -30,12 +30,11 @@ import zipfile
 # extension stripping
 def strip_extension(filename):
     extensions = '.zip', '.tar', '.bz2', '.gz', '.tgz', '.tbz', '.exe'
-
-    for ext in extensions:
-        if filename.endswith(ext):
-            filename = filename[:-len(ext)]
-
-    return filename
+    filename_noext, ext = os.path.splitext(filename)
+    if ext in extensions:
+        return strip_extension(filename_noext)  # may have .tar.bz2
+    else:
+        return filename
 
 
 # extract platform from package name
@@ -49,11 +48,12 @@ def get_platform(filename):
     tokens = filename.split("-")
     platforms = ('osx', 'mac', 'bsd',
                  'win', 'linux', 'source',
-                 'irix', 'solaris', 'mingw')
+                 'solaris',
+                 'mingw')
     platform_tokens = []
     found = False
 
-    for i, token in enumerate(tokens):
+    for token in tokens:
         if not found:
             for platform in platforms:
                 if platform in token.lower():
@@ -71,14 +71,14 @@ def get_branch(filename):
     branch = ""
 
     for token in tokens:
-        if token == "blender":
-            return branch
-
         if branch == "":
             branch = token
         else:
             branch = branch + "-" + token
 
+        if token == "blender":
+            return branch
+
     return ""
 
 # get filename
@@ -95,7 +95,7 @@ if not os.path.exists(filename):
 
 try:
     z = zipfile.ZipFile(filename, "r")
-except Exception as ex:
+except Exception, ex:
     sys.stderr.write('Failed to open zip file: %s\n' % str(ex))
     sys.exit(1)
 
@@ -112,28 +112,23 @@ branch = get_branch(packagename)
 
 if platform == '':
     sys.stderr.write('Failed to detect platform ' +
-        'from package: %r\n' % packagename)
+                     'from package: %r\n' % packagename)
     sys.exit(1)
 
 # extract
-if not branch or branch == 'master':
-    directory = 'public_html/download'
-elif branch == 'experimental-build':
-    directory = 'public_html/download/experimental'
-else:
-    directory = 'public_html/download'
+directory = 'public_html/download'
 
 try:
-    filename = os.path.join(directory, packagename)
     zf = z.open(package)
-    f = file(filename, "wb")
+    f = file(os.path.join(directory, packagename), "wb")
 
     shutil.copyfileobj(zf, f)
-    os.chmod(filename, 0644)
 
     zf.close()
     z.close()
-except Exception as ex:
+
+    os.remove(filename)
+except Exception, ex:
     sys.stderr.write('Failed to unzip package: %s\n' % str(ex))
     sys.exit(1)
 
@@ -143,6 +138,6 @@ try:
         if get_platform(f) == platform and get_branch(f) == branch:
             if f != packagename:
                 os.remove(os.path.join(directory, f))
-except Exception as ex:
+except Exception, ex:
     sys.stderr.write('Failed to remove old packages: %s\n' % str(ex))
     sys.exit(1)

build_files/buildbot/slave_compile.py

@@ -33,7 +33,7 @@ builder = sys.argv[1]
 # we run from build/ directory
 blender_dir = '../blender.git'
 
-if 'cmake' in builder:
+if builder.find('cmake') != -1:
     # cmake
 
     # set build options
@@ -46,30 +46,16 @@ if 'cmake' in builder:
     elif builder.endswith('mac_ppc_cmake'):
         cmake_options.append('-DCMAKE_OSX_ARCHITECTURES:STRING=ppc')
 
-    if 'win64' in builder:
-        cmake_options.append(['-G', '"Visual Studio 12 2013 Win64"'])
-    elif 'win32' in builder:
-        cmake_options.append(['-G', '"Visual Studio 12 2013"'])
-
-    cmake_options.append("-C../blender.git/build_files/cmake/config/blender_full.cmake")
-    cmake_options.append("-DWITH_CYCLES_CUDA_BINARIES=1")
     # configure and make
     retcode = subprocess.call(['cmake', blender_dir] + cmake_options)
     if retcode != 0:
         sys.exit(retcode)
-    if 'win' in builder:
-        retcode = subprocess.call(['msbuild', 'INSTALL.vcxproj', '/p:Configuration=Release'])
-    else:
-        retcode = subprocess.call(['make', '-s', '-j4', 'install'])
+    retcode = subprocess.call(['make', '-s', '-j4', 'install'])
     sys.exit(retcode)
 else:
-    python_bin = 'python'
-    if builder.find('linux') != -1:
-        python_bin = '/opt/lib/python-2.7/bin/python2.7'
-
     # scons
     os.chdir(blender_dir)
-    scons_cmd = [python_bin, 'scons/scons.py']
+    scons_cmd = ['python', 'scons/scons.py']
     scons_options = ['BF_FANCY=False']
 
     # We're using the same rules as release builder, so tweak
@@ -116,8 +102,6 @@ else:
 
             if config.find('player') != -1:
                 scons_options.append('BF_BUILDDIR=%s_player' % (build_dir))
-            elif config.find('cuda') != -1:
-                scons_options.append('BF_BUILDDIR=%s_cuda' % (build_dir))
             else:
                 scons_options.append('BF_BUILDDIR=%s' % (build_dir))
 
@@ -142,7 +126,7 @@ else:
 
             retcode = subprocess.call(cur_scons_cmd + scons_options)
             if retcode != 0:
-                print('Error building rules with config ' + config)
+                print('Error building rules wuth config ' + config)
                 sys.exit(retcode)
 
         sys.exit(0)
@@ -164,7 +148,7 @@ else:
                 scons_options.append('MSVS_VERSION=12.0')
                 scons_options.append('MSVC_VERSION=12.0')
                 scons_options.append('WITH_BF_CYCLES_CUDA_BINARIES=1')
-                scons_options.append('BF_CYCLES_CUDA_NVCC=nvcc.exe')
+                scons_options.append('BF_CYCLES_CUDA_NVCC=nvcc')
             scons_options.append('BF_NUMJOBS=1')
 
         elif builder.find('mac') != -1:
@@ -180,6 +164,8 @@ else:
                 os.makedirs(install_dir)
             if builder.endswith('vc2013'):
                 dlls = ('msvcp120.dll', 'msvcr120.dll', 'vcomp120.dll')
+            else:
+                dlls = ('msvcm90.dll', 'msvcp90.dll', 'msvcr90.dll', 'vcomp90.dll', 'Microsoft.VC90.CRT.manifest', 'Microsoft.VC90.OpenMP.manifest')
             if builder.find('win64') == -1:
                 dlls_path = '..\\..\\..\\redist\\x86'
             else:
@@ -187,6 +173,6 @@ else:
             for dll in dlls:
                 shutil.copyfile(os.path.join(dlls_path, dll), os.path.join(install_dir, dll))
 
-        retcode = subprocess.call([python_bin, 'scons/scons.py'] + scons_options)
+        retcode = subprocess.call(['python', 'scons/scons.py'] + scons_options)
 
         sys.exit(retcode)

build_files/buildbot/slave_pack.py

@@ -33,15 +33,13 @@ if len(sys.argv) < 2:
     sys.exit(1)
 
 builder = sys.argv[1]
-# Never write branch if it is master.
-branch = sys.argv[2] if (len(sys.argv) >= 3 and sys.argv[2] != 'master') else ''
+branch = ''
+
+if len(sys.argv) >= 3:
+    branch = sys.argv[2]
 
 # scons does own packaging
 if builder.find('scons') != -1:
-    python_bin = 'python'
-    if builder.find('linux') != -1:
-        python_bin = '/opt/lib/python-2.7/bin/python2.7'
-
     os.chdir('../blender.git')
     scons_options = ['BF_QUICK=slnt', 'BUILDBOT_BRANCH=' + branch, 'buildslave', 'BF_FANCY=False']
 
@@ -84,7 +82,7 @@ if builder.find('scons') != -1:
         os.system('cp %s %s' % (software_gl, install_dir))
         os.system('chmod 755 %s' % (os.path.join(install_dir, 'blender-softwaregl')))
 
-        retcode = subprocess.call(['schroot', '-c', chroot_name, '--', python_bin, 'scons/scons.py'] + scons_options)
+        retcode = subprocess.call(['schroot', '-c', chroot_name, '--', 'python', 'scons/scons.py'] + scons_options)
 
         sys.exit(retcode)
     else:
@@ -113,30 +111,8 @@ if builder.find('scons') != -1:
 
             scons_options.append('BF_CONFIG=' + os.path.join(config_dir, config))
 
-        retcode = subprocess.call([python_bin, 'scons/scons.py'] + scons_options)
+        retcode = subprocess.call(['python', 'scons/scons.py'] + scons_options)
         sys.exit(retcode)
-else:
-    # CMake
-    if 'win' in builder:
-        files = [f for f in os.listdir('.') if os.path.isfile(f) and f.endswith('.zip')]
-        for f in files:
-            os.remove(f)
-        retcode = subprocess.call(['cpack', '-G', 'ZIP'])
-        result_file = [f for f in os.listdir('.') if os.path.isfile(f) and f.endswith('.zip')][0]
-        os.rename(result_file, "{}.zip".format(builder))
-        # create zip file
-        try:
-            upload_zip = "buildbot_upload.zip"
-            if os.path.exists(upload_zip):
-                os.remove(upload_zip)
-            z = zipfile.ZipFile(upload_zip, "w", compression=zipfile.ZIP_STORED)
-            z.write("{}.zip".format(builder))
-            z.close()
-            sys.exit(retcode)
-        except Exception as ex:
-            sys.stderr.write('Create buildbot_upload.zip failed' + str(ex) + '\n')
-            sys.exit(1)
-
 
 # clean release directory if it already exists
 release_dir = 'release'
@@ -149,7 +125,7 @@ if os.path.exists(release_dir):
 # create release package
 try:
     subprocess.call(['make', 'package_archive'])
-except Exception as ex:
+except Exception, ex:
     sys.stderr.write('Make package release failed' + str(ex) + '\n')
     sys.exit(1)
 
@@ -180,6 +156,6 @@ try:
     z = zipfile.ZipFile(upload_zip, "w", compression=zipfile.ZIP_STORED)
     z.write(filepath, arcname=file)
     z.close()
-except Exception as ex:
+except Exception, ex:
     sys.stderr.write('Create buildbot_upload.zip failed' + str(ex) + '\n')
     sys.exit(1)

build_files/cmake/Modules/FindAlembic.cmake

@@ -1,103 +0,0 @@
-# - Find Alembic library
-# Find the native Alembic includes and library
-# This module defines
-#  ALEMBIC_INCLUDE_DIRS, where to find Alembic headers.
-#  ALEMBIC_LIBRARIES, libraries to link against to use Alembic.
-#  ALEMBIC_ROOT_DIR, The base directory to search for Alembic.
-#                    This can also be an environment variable.
-#  ALEMBIC_FOUND, If false, do not try to use Alembic.
-#  ALEMBIC_HDF5_FOUND,  indicates whether Alembic supports HDF5
-
-#=============================================================================
-# Copyright 2013 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If ALEMBIC_ROOT_DIR was defined in the environment, use it.
-IF(NOT ALEMBIC_ROOT_DIR AND NOT $ENV{ALEMBIC_ROOT_DIR} STREQUAL "")
-  SET(ALEMBIC_ROOT_DIR $ENV{ALEMBIC_ROOT_DIR})
-ENDIF()
-
-SET(_alembic_SEARCH_DIRS
-  ${ALEMBIC_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/csw # Blastwave
-  /opt/lib/alembic
-)
-
-SET(_alembic_FIND_COMPONENTS
-  AlembicAbc
-  AlembicAbcCoreAbstract
-  AlembicAbcGeom
-  AlembicAbcCoreOgawa
-  AlembicOgawa
-  AlembicUtil
-)
-
-FIND_PATH(ALEMBIC_INCLUDE_DIR
-  NAMES
-    Alembic/Abc/All.h
-  HINTS
-    ${_alembic_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-SET(_alembic_LIBRARIES)
-FOREACH(COMPONENT ${_alembic_FIND_COMPONENTS})
-  STRING(TOUPPER ${COMPONENT} UPPERCOMPONENT)
-
-  FIND_LIBRARY(ALEMBIC_${UPPERCOMPONENT}_LIBRARY
-    NAMES
-      ${COMPONENT}
-    HINTS
-      ${_alembic_SEARCH_DIRS}
-    PATH_SUFFIXES
-      lib
-      lib/static
-    )
-  MARK_AS_ADVANCED(ALEMBIC_${UPPERCOMPONENT}_LIBRARY)
-  LIST(APPEND _alembic_LIBRARIES "${ALEMBIC_${UPPERCOMPONENT}_LIBRARY}")
-ENDFOREACH()
-
-# Sepcial handling of optional libraries
-FIND_LIBRARY(ALEMBIC_ALEMBICABCCOREHDF5_LIBRARY
-  NAMES
-    AlembicAbcCoreHDF5
-  HINTS
-    ${_alembic_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib
-    lib/static
-  )
-MARK_AS_ADVANCED(ALEMBIC_ALEMBICABCCOREHDF5_LIBRARY)
-IF(ALEMBIC_ALEMBICABCCOREHDF5_LIBRARY)
-  LIST(APPEND _alembic_LIBRARIES "${ALEMBIC_ALEMBICABCCOREHDF5_LIBRARY}")
-  SET(ALEMBIC_HDF5_FOUND TRUE)
-ELSE()
-  SET(ALEMBIC_HDF5_FOUND FALSE)
-ENDIF()
-
-# handle the QUIETLY and REQUIRED arguments and set ALEMBIC_FOUND to TRUE if 
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(Alembic DEFAULT_MSG
-    _alembic_LIBRARIES ALEMBIC_INCLUDE_DIR)
-
-IF(ALEMBIC_FOUND)
-  SET(ALEMBIC_LIBRARIES ${_alembic_LIBRARIES})
-  SET(ALEMBIC_INCLUDE_DIRS ${ALEMBIC_INCLUDE_DIR})
-ENDIF(ALEMBIC_FOUND)
-
-MARK_AS_ADVANCED(
-  ALEMBIC_INCLUDE_DIR
-  ALEMBIC_LIBRARIES
-)

build_files/cmake/Modules/FindEigen3.cmake

@@ -1,56 +0,0 @@
-# - Find Eigen3 library
-# Find the native Eigen3 includes and library
-# This module defines
-#  EIGEN3_INCLUDE_DIRS, where to find spnav.h, Set when
-#                        EIGEN3_INCLUDE_DIR is found.
-#  EIGEN3_ROOT_DIR, The base directory to search for Eigen3.
-#                    This can also be an environment variable.
-#  EIGEN3_FOUND, If false, do not try to use Eigen3.
-#
-#=============================================================================
-# Copyright 2015 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If EIGEN3_ROOT_DIR was defined in the environment, use it.
-IF(NOT EIGEN3_ROOT_DIR AND NOT $ENV{EIGEN3_ROOT_DIR} STREQUAL "")
-  SET(EIGEN3_ROOT_DIR $ENV{EIGEN3_ROOT_DIR})
-ENDIF()
-
-SET(_eigen3_SEARCH_DIRS
-  ${EIGEN3_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/csw # Blastwave
-)
-
-FIND_PATH(EIGEN3_INCLUDE_DIR
-  NAMES
-    # header has no '.h' suffix
-    Eigen/Eigen
-  HINTS
-    ${_eigen3_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include/eigen3
-)
-
-# handle the QUIETLY and REQUIRED arguments and set EIGEN3_FOUND to TRUE if 
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(Eigen3 DEFAULT_MSG
-    EIGEN3_INCLUDE_DIR)
-
-IF(EIGEN3_FOUND)
-  SET(EIGEN3_INCLUDE_DIRS ${EIGEN3_INCLUDE_DIR})
-ENDIF(EIGEN3_FOUND)
-
-MARK_AS_ADVANCED(
-  EIGEN3_INCLUDE_DIR
-)

build_files/cmake/Modules/FindGLEW.cmake

@@ -1,79 +1,59 @@
-# - Find GLEW library
-# Find the native Glew includes and library
-# This module defines
-#  GLEW_INCLUDE_DIRS, where to find glew.h, Set when
-#                        GLEW_INCLUDE_DIR is found.
-#  GLEW_ROOT_DIR, The base directory to search for Glew.
-#                    This can also be an environment variable.
-#  GLEW_FOUND, If false, do not try to use Glew.
 #
-# also defined,
-#  GLEW_LIBRARY, where to find the Glew library.
-#  GLEW_MX_LIBRARY, where to find the GlewMX library.
-
-#=============================================================================
-# Copyright 2014 Blender Foundation.
+# Try to find GLEW library and include path.
+# Once done this will define
 #
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
+# GLEW_FOUND
+# GLEW_INCLUDE_PATH
+# GLEW_LIBRARY
+# 
 
-# If GLEW_ROOT_DIR was defined in the environment, use it.
-IF(NOT GLEW_ROOT_DIR AND NOT $ENV{GLEW_ROOT_DIR} STREQUAL "")
-	SET(GLEW_ROOT_DIR $ENV{GLEW_ROOT_DIR})
-ENDIF()
+IF (WIN32)
+	FIND_PATH( GLEW_INCLUDE_PATH GL/glew.h
+		$ENV{PROGRAMFILES}/GLEW/include
+		${PROJECT_SOURCE_DIR}/src/nvgl/glew/include
+		DOC "The directory where GL/glew.h resides")
+	IF (NV_SYSTEM_PROCESSOR STREQUAL "AMD64")
+		FIND_LIBRARY( GLEW_LIBRARY
+			NAMES glew64 glew64s
+			PATHS
+			$ENV{PROGRAMFILES}/GLEW/lib
+			${PROJECT_SOURCE_DIR}/src/nvgl/glew/bin
+			${PROJECT_SOURCE_DIR}/src/nvgl/glew/lib
+			DOC "The GLEW library (64-bit)"
+		)
+	ELSE(NV_SYSTEM_PROCESSOR STREQUAL "AMD64")
+		FIND_LIBRARY( GLEW_LIBRARY
+			NAMES glew GLEW glew32 glew32s
+			PATHS
+			$ENV{PROGRAMFILES}/GLEW/lib
+			${PROJECT_SOURCE_DIR}/src/nvgl/glew/bin
+			${PROJECT_SOURCE_DIR}/src/nvgl/glew/lib
+			DOC "The GLEW library"
+		)
+	ENDIF(NV_SYSTEM_PROCESSOR STREQUAL "AMD64")
+ELSE (WIN32)
+	FIND_PATH( GLEW_INCLUDE_PATH GL/glew.h
+		/usr/include
+		/usr/local/include
+		/sw/include
+		/opt/local/include
+		DOC "The directory where GL/glew.h resides")
+	FIND_LIBRARY( GLEW_LIBRARY
+		NAMES GLEW glew
+		PATHS
+		/usr/lib64
+		/usr/lib
+		/usr/local/lib64
+		/usr/local/lib
+		/sw/lib
+		/opt/local/lib
+		DOC "The GLEW library")
+ENDIF (WIN32)
 
-SET(_glew_SEARCH_DIRS
-  ${GLEW_ROOT_DIR}
-  /usr/local
-)
+IF (GLEW_INCLUDE_PATH)
+	SET(GLEW_FOUND TRUE)
+ELSE (GLEW_INCLUDE_PATH)
+	SET(GLEW_FOUND FALSE)
+ENDIF (GLEW_INCLUDE_PATH)
 
-FIND_PATH(GLEW_INCLUDE_DIR
-  NAMES
-    GL/glew.h
-  HINTS
-    ${_glew_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-FIND_LIBRARY(GLEW_LIBRARY
-  NAMES
-    GLEW
-  HINTS
-    ${_glew_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-  )
-
-
-FIND_LIBRARY(GLEW_MX_LIBRARY
-  NAMES
-    GLEWmx
-  HINTS
-    ${_glew_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-  )
-
-# handle the QUIETLY and REQUIRED arguments and set GLEW_FOUND to TRUE if 
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(Glew DEFAULT_MSG
-    GLEW_LIBRARY GLEW_INCLUDE_DIR)
-
-IF(GLEW_FOUND)
-  SET(GLEW_INCLUDE_DIRS ${GLEW_INCLUDE_DIR})
-ENDIF(GLEW_FOUND)
-
-MARK_AS_ADVANCED(
-  GLEW_INCLUDE_DIR
-  GLEW_LIBRARY
-  GLEW_MX_LIBRARY
-)
-
-UNSET(_glew_SEARCH_DIRS)
+MARK_AS_ADVANCED( GLEW_FOUND )

build_files/cmake/Modules/FindHDF5.cmake

@@ -1,75 +0,0 @@
-# - Find HDF5 library
-# Find the native hdf5 includes and library
-# This module defines
-#  HDF5_INCLUDE_DIRS, where to find hdf5 headers.
-#  HDF5_LIBRARIES, libraries to link against to use hdf5.
-#  HDF5_ROOT_DIR, The base directory to search for hdf5.
-#                 This can also be an environment variable.
-#  HDF5_FOUND, If false, do not try to use hdf5.
-
-#=============================================================================
-# Copyright 2013 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If HDF5_ROOT_DIR was defined in the environment, use it.
-IF(NOT HDF5_ROOT_DIR AND NOT $ENV{HDF5_ROOT_DIR} STREQUAL "")
-  SET(HDF5_ROOT_DIR $ENV{HDF5_ROOT_DIR})
-ENDIF()
-
-SET(_hdf5_SEARCH_DIRS
-  ${HDF5_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/csw # Blastwave
-  /opt/lib/hdf5
-)
-
-SET(_hdf5_FIND_COMPONENTS
-  hdf5
-  hdf5_hl
-)
-
-FIND_PATH(_hdf5_INCLUDE_DIRS
-  NAMES
-    hdf5.h
-  HINTS
-    ${_hdf5_SEARCH_DIRS}
-)
-
-SET(_hdf5_LIBRARIES)
-FOREACH(COMPONENT ${_hdf5_FIND_COMPONENTS})
-  STRING(TOUPPER ${COMPONENT} UPPERCOMPONENT)
-
-  FIND_LIBRARY(HDF5_${UPPERCOMPONENT}_LIBRARY
-    NAMES
-      ${COMPONENT}
-    HINTS
-      ${_hdf5_SEARCH_DIRS}
-    )
-  MARK_AS_ADVANCED(HDF5_${UPPERCOMPONENT}_LIBRARY)
-  LIST(APPEND _hdf5_LIBRARIES "${HDF5_${UPPERCOMPONENT}_LIBRARY}")
-ENDFOREACH()
-
-# handle the QUIETLY and REQUIRED arguments and set HDF5_FOUND to TRUE if 
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(hdf5 DEFAULT_MSG
-    _hdf5_LIBRARIES _hdf5_INCLUDE_DIRS)
-
-IF(HDF5_FOUND)
-  SET(HDF5_LIBRARIES ${_hdf5_LIBRARIES})
-  SET(HDF5_INCLUDE_DIRS ${_hdf5_INCLUDE_DIRS})
-ENDIF(HDF5_FOUND)
-
-MARK_AS_ADVANCED(
-  HDF5_INCLUDE_DIRS
-  HDF5_LIBRARIES
-)

build_files/cmake/Modules/FindJeMalloc.cmake

@@ -33,7 +33,6 @@ SET(_jemalloc_SEARCH_DIRS
   /sw # Fink
   /opt/local # DarwinPorts
   /opt/csw # Blastwave
-  /opt/lib/jemalloc
 )
 
 FIND_PATH(JEMALLOC_INCLUDE_DIR

build_files/cmake/Modules/FindLLVM.cmake

@@ -1,94 +0,0 @@
-# - Find LLVM library
-# Find the native LLVM includes and library
-# This module defines
-#  LLVM_INCLUDE_DIRS, where to find LLVM.h, Set when LLVM_INCLUDE_DIR is found.
-#  LLVM_LIBRARIES, libraries to link against to use LLVM.
-#  LLVM_ROOT_DIR, The base directory to search for LLVM.
-#                This can also be an environment variable.
-#  LLVM_FOUND, If false, do not try to use LLVM.
-#
-# also defined, but not for general use are
-#  LLVM_LIBRARY, where to find the LLVM library.
-
-#=============================================================================
-# Copyright 2015 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-if(LLVM_ROOT_DIR)
-	if(DEFINED LLVM_VERSION)
-		find_program(LLVM_CONFIG llvm-config-${LLVM_VERSION} HINTS ${LLVM_ROOT_DIR}/bin NO_CMAKE_PATH)
-	endif()
-	if(NOT LLVM_CONFIG)
-		find_program(LLVM_CONFIG llvm-config HINTS ${LLVM_ROOT_DIR}/bin NO_CMAKE_PATH)
-	endif()
-else()
-	if(DEFINED LLVM_VERSION)
-        message(running llvm-config-${LLVM_VERSION})
-		find_program(LLVM_CONFIG llvm-config-${LLVM_VERSION})
-	endif()
-	if(NOT LLVM_CONFIG)
-		find_program(LLVM_CONFIG llvm-config)
-	endif()
-endif()
-
-if(NOT DEFINED LLVM_VERSION)
-	execute_process(COMMAND ${LLVM_CONFIG} --version
-					OUTPUT_VARIABLE LLVM_VERSION
-					OUTPUT_STRIP_TRAILING_WHITESPACE)
-	set(LLVM_VERSION ${LLVM_VERSION} CACHE STRING "Version of LLVM to use")
-endif()
-if(NOT LLVM_ROOT_DIR)
-	execute_process(COMMAND ${LLVM_CONFIG} --prefix
-					OUTPUT_VARIABLE LLVM_ROOT_DIR
-					OUTPUT_STRIP_TRAILING_WHITESPACE)
-	set(LLVM_ROOT_DIR ${LLVM_ROOT_DIR} CACHE PATH "Path to the LLVM installation")
-endif()
-if(NOT LLVM_LIBPATH)
-	execute_process(COMMAND ${LLVM_CONFIG} --libdir
-					OUTPUT_VARIABLE LLVM_LIBPATH
-					OUTPUT_STRIP_TRAILING_WHITESPACE)
-	set(LLVM_LIBPATH ${LLVM_LIBPATH} CACHE PATH "Path to the LLVM library path")
-	mark_as_advanced(LLVM_LIBPATH)
-endif()
-
-if(LLVM_STATIC)
-	find_library(LLVM_LIBRARY
-	             NAMES LLVMAnalysis # first of a whole bunch of libs to get
-	             PATHS ${LLVM_LIBPATH})
-else()
-	find_library(LLVM_LIBRARY
-	             NAMES LLVM-${LLVM_VERSION}
-	             PATHS ${LLVM_LIBPATH})
-endif()
-
-
-if(LLVM_LIBRARY AND LLVM_ROOT_DIR AND LLVM_LIBPATH)
-	if(LLVM_STATIC)
-		# if static LLVM libraries were requested, use llvm-config to generate
-		# the list of what libraries we need, and substitute that in the right
-		# way for LLVM_LIBRARY.
-		execute_process(COMMAND ${LLVM_CONFIG} --libfiles
-		                OUTPUT_VARIABLE LLVM_LIBRARY
-		                OUTPUT_STRIP_TRAILING_WHITESPACE)
-		string(REPLACE " " ";" LLVM_LIBRARY "${LLVM_LIBRARY}")
-	endif()
-endif()
-
-
-# handle the QUIETLY and REQUIRED arguments and set SDL2_FOUND to TRUE if
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(LLVM DEFAULT_MSG
-    LLVM_LIBRARY)
-
-MARK_AS_ADVANCED(
-  LLVM_LIBRARY
-)
-

build_files/cmake/Modules/FindLZO.cmake

@@ -1,68 +0,0 @@
-# - Find LZO library
-# Find the native LZO includes and library
-# This module defines
-#  LZO_INCLUDE_DIRS, where to find lzo1x.h, Set when
-#                        LZO_INCLUDE_DIR is found.
-#  LZO_LIBRARIES, libraries to link against to use LZO.
-#  LZO_ROOT_DIR, The base directory to search for LZO.
-#                    This can also be an environment variable.
-#  LZO_FOUND, If false, do not try to use LZO.
-#
-# also defined, but not for general use are
-#  LZO_LIBRARY, where to find the LZO library.
-
-#=============================================================================
-# Copyright 2015 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If LZO_ROOT_DIR was defined in the environment, use it.
-IF(NOT LZO_ROOT_DIR AND NOT $ENV{LZO_ROOT_DIR} STREQUAL "")
-  SET(LZO_ROOT_DIR $ENV{LZO_ROOT_DIR})
-ENDIF()
-
-SET(_lzo_SEARCH_DIRS
-  ${LZO_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/csw # Blastwave
-)
-
-FIND_PATH(LZO_INCLUDE_DIR lzo/lzo1x.h
-  HINTS
-    ${_lzo_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-FIND_LIBRARY(LZO_LIBRARY
-  NAMES
-    lzo2
-  HINTS
-    ${_lzo_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-  )
-
-# handle the QUIETLY and REQUIRED arguments and set LZO_FOUND to TRUE if 
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(LZO DEFAULT_MSG
-  LZO_LIBRARY LZO_INCLUDE_DIR)
-
-IF(LZO_FOUND)
-  SET(LZO_LIBRARIES ${LZO_LIBRARY})
-  SET(LZO_INCLUDE_DIRS ${LZO_INCLUDE_DIR})
-ENDIF(LZO_FOUND)
-
-MARK_AS_ADVANCED(
-  LZO_INCLUDE_DIR
-  LZO_LIBRARY
-)

build_files/cmake/Modules/FindOpenCOLLADA.cmake

@@ -140,8 +140,3 @@ IF(OPENCOLLADA_FOUND)
   SET(OPENCOLLADA_LIBRARIES ${_opencollada_LIBRARIES})
   SET(OPENCOLLADA_INCLUDE_DIRS ${_opencollada_INCLUDES})
 ENDIF(OPENCOLLADA_FOUND)
-
-UNSET(COMPONENT)
-UNSET(UPPERCOMPONENT)
-UNSET(_opencollada_LIBRARIES)
-UNSET(_opencollada_INCLUDES)

build_files/cmake/Modules/FindOpenColorIO.cmake

@@ -63,12 +63,11 @@ FOREACH(COMPONENT ${_opencolorio_FIND_COMPONENTS})
     PATH_SUFFIXES
       lib64 lib
     )
-  IF(OPENCOLORIO_${UPPERCOMPONENT}_LIBRARY)
+  if(OPENCOLORIO_${UPPERCOMPONENT}_LIBRARY)
     LIST(APPEND _opencolorio_LIBRARIES "${OPENCOLORIO_${UPPERCOMPONENT}_LIBRARY}")
-  ENDIF()
+  endif()
 ENDFOREACH()
 
-
 # handle the QUIETLY and REQUIRED arguments and set OPENCOLORIO_FOUND to TRUE if 
 # all listed variables are TRUE
 INCLUDE(FindPackageHandleStandardArgs)
@@ -83,13 +82,5 @@ ENDIF(OPENCOLORIO_FOUND)
 MARK_AS_ADVANCED(
   OPENCOLORIO_INCLUDE_DIR
   OPENCOLORIO_LIBRARY
-  OPENCOLORIO_OPENCOLORIO_LIBRARY
-  OPENCOLORIO_TINYXML_LIBRARY
-  OPENCOLORIO_YAML-CPP_LIBRARY
 )
 
-UNSET(COMPONENT)
-UNSET(UPPERCOMPONENT)
-UNSET(_opencolorio_FIND_COMPONENTS)
-UNSET(_opencolorio_LIBRARIES)
-UNSET(_opencolorio_SEARCH_DIRS)

build_files/cmake/Modules/FindOpenEXR.cmake

@@ -34,9 +34,6 @@ IF(NOT OPENEXR_ROOT_DIR AND NOT $ENV{OPENEXR_ROOT_DIR} STREQUAL "")
   SET(OPENEXR_ROOT_DIR $ENV{OPENEXR_ROOT_DIR})
 ENDIF()
 
-# Old versions (before 2.0?) do not have any version string, just assuming this should be fine though.
-SET(_openexr_libs_ver_init "2.0")
-
 SET(_openexr_FIND_COMPONENTS
   Half
   Iex
@@ -51,7 +48,6 @@ SET(_openexr_SEARCH_DIRS
   /sw # Fink
   /opt/local # DarwinPorts
   /opt/csw # Blastwave
-  /opt/lib/openexr
 )
 
 FIND_PATH(OPENEXR_INCLUDE_DIR
@@ -86,9 +82,12 @@ IF(OPENEXR_INCLUDE_DIR)
     IF(OPENEXR_BUILD_SPECIFICATION)
       MESSAGE(STATUS "${OPENEXR_BUILD_SPECIFICATION}")
       STRING(REGEX REPLACE ".*#define[ \t]+OPENEXR_VERSION_STRING[ \t]+\"([.0-9]+)\".*"
-             "\\1" _openexr_libs_ver_init ${OPENEXR_BUILD_SPECIFICATION})
+             "\\1" XYZ ${OPENEXR_BUILD_SPECIFICATION})
+      SET("OPENEXR_VERSION" ${XYZ} CACHE STRING "Version of OpenEXR lib")
     ELSE()
-      MESSAGE(WARNING "Could not determine ILMBase library version, assuming ${_openexr_libs_ver_init}.")
+      # Old versions (before 2.0?) do not have any version string, just assuming 2.0 should be fine though. 
+      MESSAGE(WARNING "Could not determine ILMBase library version, assuming 2.0.")
+      SET("OPENEXR_VERSION" "2.0" CACHE STRING "Version of OpenEXR lib")
     ENDIF()
 
     UNSET(_openexr_CONFIG CACHE)
@@ -96,9 +95,6 @@ IF(OPENEXR_INCLUDE_DIR)
   ENDIF()
 ENDIF()
 
-SET("OPENEXR_VERSION" ${_openexr_libs_ver_init} CACHE STRING "Version of OpenEXR lib")
-UNSET(_openexr_libs_ver_init)
-
 STRING(REGEX REPLACE "([0-9]+)[.]([0-9]+).*" "\\1_\\2" _openexr_libs_ver ${OPENEXR_VERSION})
 
 SET(_openexr_LIBRARIES)
@@ -138,9 +134,3 @@ FOREACH(COMPONENT ${_openexr_FIND_COMPONENTS})
   STRING(TOUPPER ${COMPONENT} UPPERCOMPONENT)
   MARK_AS_ADVANCED(OPENEXR_${UPPERCOMPONENT}_LIBRARY)
 ENDFOREACH()
-
-UNSET(COMPONENT)
-UNSET(UPPERCOMPONENT)
-UNSET(_openexr_FIND_COMPONENTS)
-UNSET(_openexr_LIBRARIES)
-UNSET(_openexr_SEARCH_DIRS)

build_files/cmake/Modules/FindOpenGLES.cmake

@@ -1,78 +0,0 @@
-# - Try to find OpenGLES
-# Once done this will define
-#
-#  OPENGLES_FOUND           - system has OpenGLES and EGL
-#  OPENGL_EGL_FOUND         - system has EGL
-#  OPENGLES_INCLUDE_DIR     - the GLES include directory
-#  OPENGLES_LIBRARY         - the GLES library
-#  OPENGLES_EGL_INCLUDE_DIR - the EGL include directory
-#  OPENGLES_EGL_LIBRARY     - the EGL library
-#  OPENGLES_LIBRARIES       - all libraries needed for OpenGLES
-#  OPENGLES_INCLUDES        - all includes needed for OpenGLES
-
-# If OPENGLES_ROOT_DIR was defined in the environment, use it.
-IF(NOT OPENGLES_ROOT_DIR AND NOT $ENV{OPENGLES_ROOT_DIR} STREQUAL "")
-  SET(OPENGLES_ROOT_DIR $ENV{OPENGLES_ROOT_DIR})
-ENDIF()
-
-SET(_opengles_SEARCH_DIRS
-  ${OPENGLES_ROOT_DIR}
-  /usr/local
-)
-
-FIND_PATH(OPENGLES_INCLUDE_DIR
-  NAMES
-    GLES2/gl2.h
-  HINTS
-    ${_opengles_SEARCH_DIRS}
-)
-
-FIND_LIBRARY(OPENGLES_LIBRARY
-  NAMES
-    GLESv2
-  PATHS
-    ${_opengles_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-)
-
-FIND_PATH(OPENGLES_EGL_INCLUDE_DIR
-  NAMES
-    EGL/egl.h
-  HINTS
-    ${_opengles_SEARCH_DIRS}
-)
-
-FIND_LIBRARY(OPENGLES_EGL_LIBRARY
-  NAMES
-    EGL
-  HINTS
-    ${_opengles_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-)
-
-IF(OPENGLES_EGL_LIBRARY AND OPENGLES_EGL_INCLUDE_DIR)
-  SET(OPENGL_EGL_FOUND "YES")
-ELSE()
-  SET(OPENGL_EGL_FOUND "NO")
-ENDIF()
-
-IF(OPENGLES_LIBRARY AND OPENGLES_INCLUDE_DIR AND
-   OPENGLES_EGL_LIBRARY AND OPENGLES_EGL_INCLUDE_DIR)
-  SET(OPENGLES_LIBRARIES ${OPENGLES_LIBRARY} ${OPENGLES_LIBRARIES}
-                           ${OPENGLES_EGL_LIBRARY})
-  SET(OPENGLES_INCLUDES ${OPENGLES_INCLUDE_DIR} ${OPENGLES_EGL_INCLUDE_DIR})
-  SET(OPENGLES_FOUND "YES")
-ELSE()
-  SET(OPENGLES_FOUND "NO")
-ENDIF()
-
-MARK_AS_ADVANCED(
-  OPENGLES_EGL_INCLUDE_DIR
-  OPENGLES_EGL_LIBRARY
-  OPENGLES_LIBRARY
-  OPENGLES_INCLUDE_DIR
-)
-
-UNSET(_opengles_SEARCH_DIRS)

build_files/cmake/Modules/FindOpenImageIO.cmake

@@ -7,8 +7,6 @@
 #  OPENIMAGEIO_ROOT_DIR, The base directory to search for OpenImageIO.
 #                        This can also be an environment variable.
 #  OPENIMAGEIO_FOUND, If false, do not try to use OpenImageIO.
-#  OPENIMAGEIO_PUGIXML_FOUND, Indicates whether OIIO has biltin PuguXML parser.
-#  OPENIMAGEIO_IDIFF, full path to idiff application if found.
 #
 # also defined, but not for general use are
 #  OPENIMAGEIO_LIBRARY, where to find the OpenImageIO library.
@@ -56,14 +54,6 @@ FIND_LIBRARY(OPENIMAGEIO_LIBRARY
     lib64 lib
   )
 
-FIND_FILE(OPENIMAGEIO_IDIFF
-  NAMES
-    idiff
-  ${OPENIMAGEIO_ROOT_DIR}
-  PATH_SUFFIXES
-    bin
-)
-
 # handle the QUIETLY and REQUIRED arguments and set OPENIMAGEIO_FOUND to TRUE if 
 # all listed variables are TRUE
 INCLUDE(FindPackageHandleStandardArgs)
@@ -73,17 +63,9 @@ FIND_PACKAGE_HANDLE_STANDARD_ARGS(OpenImageIO DEFAULT_MSG
 IF(OPENIMAGEIO_FOUND)
   SET(OPENIMAGEIO_LIBRARIES ${OPENIMAGEIO_LIBRARY})
   SET(OPENIMAGEIO_INCLUDE_DIRS ${OPENIMAGEIO_INCLUDE_DIR})
-  IF(EXISTS ${OPENIMAGEIO_INCLUDE_DIR}/OpenImageIO/pugixml.hpp)
-    SET(OPENIMAGEIO_PUGIXML_FOUND TRUE)
-  ENDIF()
-ELSE()
-  SET(OPENIMAGEIO_PUGIXML_FOUND FALSE)
-ENDIF()
+ENDIF(OPENIMAGEIO_FOUND)
 
 MARK_AS_ADVANCED(
   OPENIMAGEIO_INCLUDE_DIR
   OPENIMAGEIO_LIBRARY
-  OPENIMAGEIO_IDIFF
 )
-
-UNSET(_openimageio_SEARCH_DIRS)

build_files/cmake/Modules/FindOpenJPEG.cmake

@@ -69,5 +69,3 @@ MARK_AS_ADVANCED(
   OPENJPEG_INCLUDE_DIR
   OPENJPEG_LIBRARY
 )
-
-UNSET(_openjpeg_SEARCH_DIRS)

build_files/cmake/Modules/FindOpenShadingLanguage.cmake

@@ -1,98 +0,0 @@
-# - Find OpenShadingLanguage library
-# Find the native OpenShadingLanguage includes and library
-# This module defines
-#  OSL_INCLUDE_DIRS, where to find OSL headers, Set when
-#                    OSL_INCLUDE_DIR is found.
-#  OSL_LIBRARIES, libraries to link against to use OSL.
-#  OSL_ROOT_DIR, the base directory to search for OSL.
-#                This can also be an environment variable.
-#  OSL_COMPILER, full path to OSL script compiler.
-#  OSL_FOUND, if false, do not try to use OSL.
-#  OSL_LIBRARY_VERSION_MAJOR, OSL_LIBRARY_VERSION_MINOR,  the major
-#                and minor versions of OSL library if found.
-#
-#=============================================================================
-# Copyright 2014 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If OSL_ROOT_DIR was defined in the environment, use it.
-IF(NOT OSL_ROOT_DIR AND NOT $ENV{OSL_ROOT_DIR} STREQUAL "")
-  SET(OSL_ROOT_DIR $ENV{OSL_ROOT_DIR})
-ENDIF()
-
-SET(_osl_FIND_COMPONENTS
-  oslcomp
-  oslexec
-  oslquery
-)
-
-SET(_osl_SEARCH_DIRS
-  ${OSL_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/csw # Blastwave
-  /opt/lib/osl
-)
-
-FIND_PATH(OSL_INCLUDE_DIR
-  NAMES
-    OSL/oslversion.h
-  HINTS
-    ${_osl_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-SET(_osl_LIBRARIES)
-FOREACH(COMPONENT ${_osl_FIND_COMPONENTS})
-  STRING(TOUPPER ${COMPONENT} UPPERCOMPONENT)
-
-  FIND_LIBRARY(OSL_${UPPERCOMPONENT}_LIBRARY
-    NAMES
-      ${COMPONENT}
-    HINTS
-      ${_osl_SEARCH_DIRS}
-    PATH_SUFFIXES
-      lib64 lib
-    )
-  LIST(APPEND _osl_LIBRARIES "${OSL_${UPPERCOMPONENT}_LIBRARY}")
-ENDFOREACH()
-
-FIND_PROGRAM(OSL_COMPILER oslc
-             HINTS ${_osl_SEARCH_DIRS}
-             PATH_SUFFIXES bin)
-
-# handle the QUIETLY and REQUIRED arguments and set OSL_FOUND to TRUE if
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(OSL DEFAULT_MSG _osl_LIBRARIES OSL_INCLUDE_DIR OSL_COMPILER)
-
-IF(OSL_FOUND)
-  SET(OSL_LIBRARIES ${_osl_LIBRARIES})
-  SET(OSL_INCLUDE_DIRS ${OSL_INCLUDE_DIR})
-
-  FILE(STRINGS "${OSL_INCLUDE_DIR}/OSL/oslversion.h" OSL_LIBRARY_VERSION_MAJOR
-       REGEX "^[ \t]*#define[ \t]+OSL_LIBRARY_VERSION_MAJOR[ \t]+[0-9]+.*$")
-  FILE(STRINGS "${OSL_INCLUDE_DIR}/OSL/oslversion.h" OSL_LIBRARY_VERSION_MINOR
-       REGEX "^[ \t]*#define[ \t]+OSL_LIBRARY_VERSION_MINOR[ \t]+[0-9]+.*$")
-  STRING(REGEX REPLACE ".*#define[ \t]+OSL_LIBRARY_VERSION_MAJOR[ \t]+([.0-9]+).*"
-         "\\1" OSL_LIBRARY_VERSION_MAJOR ${OSL_LIBRARY_VERSION_MAJOR})
-  STRING(REGEX REPLACE ".*#define[ \t]+OSL_LIBRARY_VERSION_MINOR[ \t]+([.0-9]+).*"
-         "\\1" OSL_LIBRARY_VERSION_MINOR ${OSL_LIBRARY_VERSION_MINOR})
-ENDIF(OSL_FOUND)
-
-MARK_AS_ADVANCED(
-  OSL_INCLUDE_DIR
-)
-FOREACH(COMPONENT ${_osl_FIND_COMPONENTS})
-  STRING(TOUPPER ${COMPONENT} UPPERCOMPONENT)
-  MARK_AS_ADVANCED(OSL_${UPPERCOMPONENT}_LIBRARY)
-ENDFOREACH()

build_files/cmake/Modules/FindPCRE.cmake

@@ -40,6 +40,7 @@ FIND_PATH(PCRE_INCLUDE_DIR pcre.h
     ${_pcre_SEARCH_DIRS}
   PATH_SUFFIXES
     include
+    include
 )
 
 FIND_LIBRARY(PCRE_LIBRARY

build_files/cmake/Modules/FindPugiXML.cmake

@@ -1,73 +0,0 @@
-# - Find PugiXML library
-# Find the native PugiXML includes and library
-# This module defines
-#  PUGIXML_INCLUDE_DIRS, where to find pugixml.hpp, Set when
-#                        PugiXML is found.
-#  PUGIXML_LIBRARIES, libraries to link against to use PugiiXML.
-#  PUGIXML_ROOT_DIR, The base directory to search for PugiXML.
-#                    This can also be an environment variable.
-#  PUGIXML_FOUND, If false, do not try to use PugiXML.
-#
-# also defined, but not for general use are
-#  PUGIXML_LIBRARY, where to find the PugiXML library.
-
-#=============================================================================
-# Copyright 2014 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If PUGIXML_ROOT_DIR was defined in the environment, use it.
-IF(NOT PUGIXML_ROOT_DIR AND NOT $ENV{PUGIXML_ROOT_DIR} STREQUAL "")
-  SET(PUGIXML_ROOT_DIR $ENV{PUGIXML_ROOT_DIR})
-ENDIF()
-
-SET(_pugixml_SEARCH_DIRS
-  ${PUGIXML_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/csw # Blastwave
-  /opt/lib/oiio
-)
-
-FIND_PATH(PUGIXML_INCLUDE_DIR
-  NAMES
-    pugixml.hpp
-  HINTS
-    ${_pugixml_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-FIND_LIBRARY(PUGIXML_LIBRARY
-  NAMES
-    pugixml
-  HINTS
-    ${_pugixml_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-  )
-
-# handle the QUIETLY and REQUIRED arguments and set PUGIXML_FOUND to TRUE if 
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(PUGIXML DEFAULT_MSG
-    PUGIXML_LIBRARY PUGIXML_INCLUDE_DIR)
-
-IF(PUGIXML_FOUND)
-  SET(PUGIXML_LIBRARIES ${PUGIXML_LIBRARY})
-  SET(PUGIXML_INCLUDE_DIRS ${PUGIXML_INCLUDE_DIR})
-ELSE()
-  SET(PUGIXML_PUGIXML_FOUND FALSE)
-ENDIF()
-
-MARK_AS_ADVANCED(
-  PUGIXML_INCLUDE_DIR
-  PUGIXML_LIBRARY
-)

build_files/cmake/Modules/FindPythonLibsUnix.cmake

@@ -14,7 +14,6 @@
 #  PYTHON_INCLUDE_CONFIG_DIRS
 #  PYTHON_LIBRARIES
 #  PYTHON_LIBPATH, Used for installation
-#  PYTHON_SITE_PACKAGES, Used for installation (as a Python module)
 #  PYTHON_LINKFLAGS
 #  PYTHON_ROOT_DIR, The base directory to search for Python.
 #                   This can also be an environment variable.
@@ -66,14 +65,6 @@ IF(DEFINED PYTHON_LIBPATH)
   SET(_IS_LIB_PATH_DEF ON)
 ENDIF()
 
-STRING(REPLACE "." "" _PYTHON_VERSION_NO_DOTS ${PYTHON_VERSION})
-
-SET(_python_SEARCH_DIRS
-  ${PYTHON_ROOT_DIR}
-  "$ENV{HOME}/py${_PYTHON_VERSION_NO_DOTS}"
-  "/opt/py${_PYTHON_VERSION_NO_DOTS}"
-  "/opt/lib/python-${PYTHON_VERSION}"
-)
 
 # only search for the dirs if we havn't already
 IF((NOT _IS_INC_DEF) OR (NOT _IS_INC_CONF_DEF) OR (NOT _IS_LIB_DEF) OR (NOT _IS_LIB_PATH_DEF))
@@ -83,7 +74,14 @@ IF((NOT _IS_INC_DEF) OR (NOT _IS_INC_CONF_DEF) OR (NOT _IS_LIB_DEF) OR (NOT _IS_
     "dm;dmu;du;d" # debug
   )
 
+  STRING(REPLACE "." "" _PYTHON_VERSION_NO_DOTS ${PYTHON_VERSION})
 
+  SET(_python_SEARCH_DIRS
+    ${PYTHON_ROOT_DIR}
+    "$ENV{HOME}/py${_PYTHON_VERSION_NO_DOTS}"
+    "/opt/py${_PYTHON_VERSION_NO_DOTS}"
+    "/opt/lib/python-${PYTHON_VERSION}"
+  )
 
   FOREACH(_CURRENT_ABI_FLAGS ${_python_ABI_FLAGS})
     #IF(CMAKE_BUILD_TYPE STREQUAL Debug)
@@ -148,7 +146,6 @@ IF((NOT _IS_INC_DEF) OR (NOT _IS_INC_CONF_DEF) OR (NOT _IS_LIB_DEF) OR (NOT _IS_
     ENDIF()
 
     IF(PYTHON_LIBRARY AND PYTHON_LIBPATH AND PYTHON_INCLUDE_DIR AND PYTHON_INCLUDE_CONFIG_DIR)
-      SET(_PYTHON_ABI_FLAGS "${_CURRENT_ABI_FLAGS}")
       break()
     ELSE()
       # ensure we dont find values from 2 different ABI versions
@@ -171,6 +168,7 @@ IF((NOT _IS_INC_DEF) OR (NOT _IS_INC_CONF_DEF) OR (NOT _IS_LIB_DEF) OR (NOT _IS_
   UNSET(_CURRENT_PATH)
 
   UNSET(_python_ABI_FLAGS)
+  UNSET(_python_SEARCH_DIRS)
 ENDIF()
 
 UNSET(_IS_INC_DEF)
@@ -189,41 +187,17 @@ IF(PYTHONLIBSUNIX_FOUND)
   SET(PYTHON_INCLUDE_DIRS ${PYTHON_INCLUDE_DIR} ${PYTHON_INCLUDE_CONFIG_DIR})
   SET(PYTHON_LIBRARIES ${PYTHON_LIBRARY})
 
-  FIND_FILE(PYTHON_SITE_PACKAGES
-    NAMES
-      # debian specific
-      dist-packages
-      site-packages
-    HINTS
-      ${PYTHON_LIBPATH}/python${PYTHON_VERSION}
-  )
-
   # we need this for installation
   # XXX No more valid with debian-like py3.4 packages...
 #  GET_FILENAME_COMPONENT(PYTHON_LIBPATH ${PYTHON_LIBRARY} PATH)
 
-  # not required for build, just used when bundling Python.
-  FIND_PROGRAM(
-    PYTHON_EXECUTABLE
-    NAMES
-      "python${PYTHON_VERSION}${_PYTHON_ABI_FLAGS}"
-      "python${PYTHON_VERSION}"
-      "python"
-    HINTS
-      ${_python_SEARCH_DIRS}
-    PATH_SUFFIXES bin
-  )
+  # not used
+  # SET(PYTHON_BINARY ${PYTHON_EXECUTABLE} CACHE STRING "")
 ENDIF()
 
-UNSET(_PYTHON_VERSION_NO_DOTS)
-UNSET(_PYTHON_ABI_FLAGS)
-UNSET(_python_SEARCH_DIRS)
-
 MARK_AS_ADVANCED(
   PYTHON_INCLUDE_DIR
   PYTHON_INCLUDE_CONFIG_DIR
   PYTHON_LIBRARY
   PYTHON_LIBPATH
-  PYTHON_SITE_PACKAGES
-  PYTHON_EXECUTABLE
 )

build_files/cmake/Modules/FindSDL2.cmake

@@ -1,72 +0,0 @@
-# - Find SDL library
-# Find the native SDL includes and library
-# This module defines
-#  SDL2_INCLUDE_DIRS, where to find SDL.h, Set when SDL2_INCLUDE_DIR is found.
-#  SDL2_LIBRARIES, libraries to link against to use SDL.
-#  SDL2_ROOT_DIR, The base directory to search for SDL.
-#                This can also be an environment variable.
-#  SDL2_FOUND, If false, do not try to use SDL.
-#
-# also defined, but not for general use are
-#  SDL2_LIBRARY, where to find the SDL library.
-
-#=============================================================================
-# Copyright 2015 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If SDL2_ROOT_DIR was defined in the environment, use it.
-IF(NOT SDL2_ROOT_DIR AND NOT $ENV{SDL2_ROOT_DIR} STREQUAL "")
-  SET(SDL2_ROOT_DIR $ENV{SDL2_ROOT_DIR})
-ENDIF()
-
-SET(_sdl2_SEARCH_DIRS
-  ${SDL2_ROOT_DIR}
-  ~/Library/Frameworks
-  /Library/Frameworks
-  /usr/local
-  /usr
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/csw # Blastwave
-)
-
-FIND_PATH(SDL2_INCLUDE_DIR
-  NAMES
-  SDL.h
-  HINTS
-    ${_sdl2_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include/SDL2 include
-)
-
-FIND_LIBRARY(SDL2_LIBRARY
-  NAMES
-  SDL2
-  HINTS
-    ${_sdl2_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-  )
-
-# handle the QUIETLY and REQUIRED arguments and set SDL2_FOUND to TRUE if
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL2 DEFAULT_MSG
-    SDL2_LIBRARY SDL2_INCLUDE_DIR)
-
-IF(SDL2_FOUND)
-  SET(SDL2_LIBRARIES ${SDL2_LIBRARY})
-  SET(SDL2_INCLUDE_DIRS ${SDL2_INCLUDE_DIR})
-ENDIF(SDL2_FOUND)
-
-MARK_AS_ADVANCED(
-  SDL2_INCLUDE_DIR
-  SDL2_LIBRARY
-)

build_files/cmake/Modules/GTestTesting.cmake

@@ -32,8 +32,6 @@ macro(BLENDER_SRC_GTEST NAME SRC EXTRA_LIBS)
 		                      bf_testing_main
 		                      bf_intern_guardedalloc
 		                      extern_gtest
-		                      # needed for glog
-		                      ${PTHREADS_LIBRARIES}
 		                      extern_glog)
 		set_target_properties(${NAME}_test PROPERTIES
 		                      RUNTIME_OUTPUT_DIRECTORY         "${TESTS_OUTPUT_DIR}"

build_files/cmake/buildinfo.cmake

@@ -2,12 +2,12 @@
 # ./source/creator/CMakeLists.txt to write ./source/creator/buildinfo.h
 
 # Extract working copy information for SOURCE_DIR into MY_XXX variables
-# with a default in case anything fails, for example when using git-svn
+# with a default in case anything fails, for examble when using git-svn
 set(MY_WC_HASH "unknown")
 set(MY_WC_BRANCH "unknown")
 set(MY_WC_COMMIT_TIMESTAMP 0)
 
-# Guess if this is a git working copy and then look up the revision
+# Guess if this is a SVN working copy and then look up the revision
 if(EXISTS ${SOURCE_DIR}/.git)
 	# The FindGit.cmake module is part of the standard distribution
 	include(FindGit)
@@ -60,8 +60,7 @@ if(EXISTS ${SOURCE_DIR}/.git)
 			execute_process(COMMAND git log HEAD..@{u}
 			                WORKING_DIRECTORY ${SOURCE_DIR}
 			                OUTPUT_VARIABLE _git_below_check
-			                OUTPUT_STRIP_TRAILING_WHITESPACE
-			                ERROR_QUIET)
+			                OUTPUT_STRIP_TRAILING_WHITESPACE)
 			if(NOT _git_below_check STREQUAL "")
 				# If there're commits between HEAD and upstream this means
 				# that we're reset-ed to older revision. Use it's hash then.
@@ -111,7 +110,7 @@ if(EXISTS ${SOURCE_DIR}/.git)
 		if(NOT _git_changed_files STREQUAL "")
 			set(MY_WC_BRANCH "${MY_WC_BRANCH} (modified)")
 		else()
-			# Unpushed commits are also considered local modifications
+			# Unpushed commits are also considered local odifications
 			execute_process(COMMAND git log @{u}..
 			                WORKING_DIRECTORY ${SOURCE_DIR}
 			                OUTPUT_VARIABLE _git_unpushed_log
@@ -128,7 +127,7 @@ if(EXISTS ${SOURCE_DIR}/.git)
 endif()
 
 # BUILD_PLATFORM and BUILD_PLATFORM are taken from CMake
-# but BUILD_DATE and BUILD_TIME are platform dependent
+# but BUILD_DATE and BUILD_TIME are plataform dependant
 if(UNIX)
 	execute_process(COMMAND date "+%Y-%m-%d" OUTPUT_VARIABLE BUILD_DATE OUTPUT_STRIP_TRAILING_WHITESPACE)
 	execute_process(COMMAND date "+%H:%M:%S" OUTPUT_VARIABLE BUILD_TIME OUTPUT_STRIP_TRAILING_WHITESPACE)
@@ -138,7 +137,7 @@ if(WIN32)
 	execute_process(COMMAND cmd /c time /t OUTPUT_VARIABLE BUILD_TIME OUTPUT_STRIP_TRAILING_WHITESPACE)
 endif()
 
-# Write a file with the BUILD_HASH define
+# Write a file with the SVNVERSION define
 file(WRITE buildinfo.h.txt
 	"#define BUILD_HASH \"${MY_WC_HASH}\"\n"
 	"#define BUILD_COMMIT_TIMESTAMP ${MY_WC_COMMIT_TIMESTAMP}\n"
@@ -147,14 +146,6 @@ file(WRITE buildinfo.h.txt
 	"#define BUILD_TIME \"${BUILD_TIME}\"\n"
 )
 
-# cleanup
-unset(MY_WC_HASH)
-unset(MY_WC_COMMIT_TIMESTAMP)
-unset(MY_WC_BRANCH)
-unset(BUILD_DATE)
-unset(BUILD_TIME)
-
-
 # Copy the file to the final header only if the version changes
 # and avoid needless rebuilds
 # TODO: verify this comment is true, as BUILD_TIME probably changes

build_files/cmake/cmake_consistency_check.py

@@ -28,17 +28,13 @@ if not sys.version.startswith("3"):
           sys.version.partition(" ")[0])
     sys.exit(1)
 
-from cmake_consistency_check_config import (
-        IGNORE,
-        UTF8_CHECK,
-        SOURCE_DIR,
-        BUILD_DIR,
-        )
-
+from cmake_consistency_check_config import IGNORE, UTF8_CHECK, SOURCE_DIR
 
 import os
 from os.path import join, dirname, normpath, splitext
 
+print("Scanning:", SOURCE_DIR)
+
 global_h = set()
 global_c = set()
 global_refs = {}
@@ -138,7 +134,6 @@ def cmake_get_src(f):
 
         if found:
             cmake_base = dirname(f)
-            cmake_base_bin = os.path.join(BUILD_DIR, os.path.relpath(cmake_base, SOURCE_DIR))
 
             while it is not None:
                 i += 1
@@ -159,8 +154,6 @@ def cmake_get_src(f):
 
                     # replace dirs
                     l = l.replace("${CMAKE_CURRENT_SOURCE_DIR}", cmake_base)
-                    l = l.replace("${CMAKE_CURRENT_BINARY_DIR}", cmake_base_bin)
-                    l = l.strip('"')
 
                     if not l:
                         pass
@@ -181,7 +174,7 @@ def cmake_get_src(f):
                             elif is_c(new_file):
                                 sources_c.append(new_file)
                                 global_refs.setdefault(new_file, []).append((f, i))
-                            elif l in {"PARENT_SCOPE", }:
+                            elif l in ("PARENT_SCOPE", ):
                                 # cmake var, ignore
                                 pass
                             elif new_file.endswith(".list"):
@@ -194,26 +187,21 @@ def cmake_get_src(f):
                                 pass
                             elif new_file.endswith(".osl"):  # open shading language
                                 pass
-                            elif new_file.endswith(".glsl"):
-                                pass
                             else:
                                 raise Exception("unknown file type - not c or h %s -> %s" % (f, new_file))
 
                         elif context_name == "INC":
-                            if new_file.startswith(BUILD_DIR):
-                                # assume generated path
-                                pass
-                            elif os.path.isdir(new_file):
+                            if os.path.isdir(new_file):
                                 new_path_rel = os.path.relpath(new_file, cmake_base)
 
                                 if new_path_rel != l:
                                     print("overly relative path:\n  %s:%d\n  %s\n  %s" % (f, i, l, new_path_rel))
 
-                                    # # Save time. just replace the line
+                                    ## Save time. just replace the line
                                     # replace_line(f, i - 1, new_path_rel)
 
                             else:
-                                raise Exception("non existent include %s:%d -> %s" % (f, i, new_file))
+                                raise Exception("non existant include %s:%d -> %s" % (f, i, new_file))
 
                         # print(new_file)
 
@@ -240,6 +228,10 @@ def cmake_get_src(f):
     filen.close()
 
 
+for cmake in source_list(SOURCE_DIR, is_cmake):
+    cmake_get_src(cmake)
+
+
 def is_ignore(f):
     for ig in IGNORE:
         if ig in f:
@@ -247,83 +239,73 @@ def is_ignore(f):
     return False
 
 
-def main():
+# First do stupid check, do these files exist?
+print("\nChecking for missing references:")
+is_err = False
+errs = []
+for f in (global_h | global_c):
+    if f.endswith("dna.c"):
+        continue
 
-    print("Scanning:", SOURCE_DIR)
+    if not os.path.exists(f):
+        refs = global_refs[f]
+        if refs:
+            for cf, i in refs:
+                errs.append((cf, i))
+        else:
+            raise Exception("CMake referenecs missing, internal error, aborting!")
+        is_err = True
 
-    for cmake in source_list(SOURCE_DIR, is_cmake):
-        cmake_get_src(cmake)
-
-    # First do stupid check, do these files exist?
-    print("\nChecking for missing references:")
-    is_err = False
-    errs = []
-    for f in (global_h | global_c):
-        if f.startswith(BUILD_DIR):
-            continue
-
-        if not os.path.exists(f):
-            refs = global_refs[f]
-            if refs:
-                for cf, i in refs:
-                    errs.append((cf, i))
-            else:
-                raise Exception("CMake referenecs missing, internal error, aborting!")
-            is_err = True
-
-    errs.sort()
-    errs.reverse()
-    for cf, i in errs:
-        print("%s:%d" % (cf, i))
-        # Write a 'sed' script, useful if we get a lot of these
-        # print("sed '%dd' '%s' > '%s.tmp' ; mv '%s.tmp' '%s'" % (i, cf, cf, cf, cf))
+errs.sort()
+errs.reverse()
+for cf, i in errs:
+    print("%s:%d" % (cf, i))
+    # Write a 'sed' script, useful if we get a lot of these
+    # print("sed '%dd' '%s' > '%s.tmp' ; mv '%s.tmp' '%s'" % (i, cf, cf, cf, cf))
 
 
-    if is_err:
-        raise Exception("CMake referenecs missing files, aborting!")
-    del is_err
-    del errs
+if is_err:
+    raise Exception("CMake referenecs missing files, aborting!")
+del is_err
+del errs
 
-    # now check on files not accounted for.
-    print("\nC/C++ Files CMake doesnt know about...")
-    for cf in sorted(source_list(SOURCE_DIR, is_c)):
-        if not is_ignore(cf):
-            if cf not in global_c:
-                print("missing_c: ", cf)
+# now check on files not accounted for.
+print("\nC/C++ Files CMake doesnt know about...")
+for cf in sorted(source_list(SOURCE_DIR, is_c)):
+    if not is_ignore(cf):
+        if cf not in global_c:
+            print("missing_c: ", cf)
 
-            # check if automake builds a corrasponding .o file.
-            '''
-            if cf in global_c:
-                out1 = os.path.splitext(cf)[0] + ".o"
-                out2 = os.path.splitext(cf)[0] + ".Po"
-                out2_dir, out2_file = out2 = os.path.split(out2)
-                out2 = os.path.join(out2_dir, ".deps", out2_file)
-                if not os.path.exists(out1) and not os.path.exists(out2):
-                    print("bad_c: ", cf)
-            '''
+        # check if automake builds a corrasponding .o file.
+        '''
+        if cf in global_c:
+            out1 = os.path.splitext(cf)[0] + ".o"
+            out2 = os.path.splitext(cf)[0] + ".Po"
+            out2_dir, out2_file = out2 = os.path.split(out2)
+            out2 = os.path.join(out2_dir, ".deps", out2_file)
+            if not os.path.exists(out1) and not os.path.exists(out2):
+                print("bad_c: ", cf)
+        '''
 
-    print("\nC/C++ Headers CMake doesnt know about...")
-    for hf in sorted(source_list(SOURCE_DIR, is_c_header)):
-        if not is_ignore(hf):
-            if hf not in global_h:
-                print("missing_h: ", hf)
+print("\nC/C++ Headers CMake doesnt know about...")
+for hf in sorted(source_list(SOURCE_DIR, is_c_header)):
+    if not is_ignore(hf):
+        if hf not in global_h:
+            print("missing_h: ", hf)
 
-    if UTF8_CHECK:
-        # test encoding
-        import traceback
-        for files in (global_c, global_h):
-            for f in sorted(files):
-                if os.path.exists(f):
-                    # ignore outside of our source tree
-                    if "extern" not in f:
-                        i = 1
-                        try:
-                            for l in open(f, "r", encoding="utf8"):
-                                i += 1
-                        except UnicodeDecodeError:
-                            print("Non utf8: %s:%d" % (f, i))
-                            if i > 1:
-                                traceback.print_exc()
-
-if __name__ == "__main__":
-    main()
+if UTF8_CHECK:
+    # test encoding
+    import traceback
+    for files in (global_c, global_h):
+        for f in sorted(files):
+            if os.path.exists(f):
+                # ignore outside of our source tree
+                if "extern" not in f:
+                    i = 1
+                    try:
+                        for l in open(f, "r", encoding="utf8"):
+                            i += 1
+                    except:
+                        print("Non utf8: %s:%d" % (f, i))
+                        if i > 1:
+                            traceback.print_exc()

build_files/cmake/cmake_consistency_check_config.py

@@ -2,7 +2,6 @@ import os
 
 IGNORE = (
     "/test/",
-    "/tests/gtests/",
     "/BSP_GhostTest/",
     "/release/",
     "/xembed/",
@@ -74,6 +73,3 @@ IGNORE = (
 UTF8_CHECK = True
 
 SOURCE_DIR = os.path.normpath(os.path.abspath(os.path.normpath(os.path.join(os.path.dirname(__file__), "..", ".."))))
-
-# doesn't have to exist, just use as reference
-BUILD_DIR = os.path.normpath(os.path.abspath(os.path.normpath(os.path.join(SOURCE_DIR, "..", "build"))))

build_files/cmake/cmake_netbeans_project.py

@@ -24,24 +24,23 @@
 
 """
 Example linux usage
- python3 ~/blender-git/blender/build_files/cmake/cmake_netbeans_project.py ~/blender-git/cmake
+ python3 ~/blenderSVN/blender/build_files/cmake/cmake_netbeans_project.py ~/blenderSVN/cmake
 
 Windows not supported so far
 """
 
-from project_info import (
-        SIMPLE_PROJECTFILE,
-        SOURCE_DIR,
-        CMAKE_DIR,
-        PROJECT_DIR,
-        source_list,
-        is_project_file,
-        is_c_header,
-        # is_py,
-        cmake_advanced_info,
-        cmake_compiler_defines,
-        project_name_get,
-        )
+from project_info import (SIMPLE_PROJECTFILE,
+                          SOURCE_DIR,
+                          CMAKE_DIR,
+                          PROJECT_DIR,
+                          source_list,
+                          is_project_file,
+                          is_c_header,
+                          # is_py,
+                          cmake_advanced_info,
+                          cmake_compiler_defines,
+                          project_name_get,
+                          )
 
 
 import os
@@ -68,7 +67,7 @@ def create_nb_project_main():
         if 0:
             PROJECT_NAME = "Blender"
         else:
-            # be tricky, get the project name from git if we can!
+            # be tricky, get the project name from SVN if we can!
             PROJECT_NAME = project_name_get()
 
         # --------------- NB spesific
@@ -126,8 +125,6 @@ def create_nb_project_main():
         f.write('    </configuration>\n')
         f.write('</project>\n')
 
-        f.close()
-
         f = open(join(PROJECT_DIR_NB, "configurations.xml"), 'w')
 
         f.write('<?xml version="1.0" encoding="UTF-8"?>\n')
@@ -246,8 +243,6 @@ def create_nb_project_main():
 
         f.write('</configurationDescriptor>\n')
 
-        f.close()
-
 
 def main():
     create_nb_project_main()

build_files/cmake/cmake_qtcreator_project.py

@@ -22,27 +22,26 @@
 
 # <pep8 compliant>
 
-r"""
-Example Linux usage:
- python ~/blender-git/blender/build_files/cmake/cmake_qtcreator_project.py ~/blender-git/cmake
-
+"""
 Example Win32 usage:
  c:\Python32\python.exe c:\blender_dev\blender\build_files\cmake\cmake_qtcreator_project.py c:\blender_dev\cmake_build
+
+example linux usage
+ python .~/blenderSVN/blender/build_files/cmake/cmake_qtcreator_project.py ~/blenderSVN/cmake
 """
 
-from project_info import (
-        SIMPLE_PROJECTFILE,
-        SOURCE_DIR,
-        # CMAKE_DIR,
-        PROJECT_DIR,
-        source_list,
-        is_project_file,
-        is_c_header,
-        is_py,
-        cmake_advanced_info,
-        cmake_compiler_defines,
-        project_name_get,
-        )
+from project_info import (SIMPLE_PROJECTFILE,
+                          SOURCE_DIR,
+                          # CMAKE_DIR,
+                          PROJECT_DIR,
+                          source_list,
+                          is_project_file,
+                          is_c_header,
+                          is_py,
+                          cmake_advanced_info,
+                          cmake_compiler_defines,
+                          project_name_get,
+                          )
 
 import os
 import sys
@@ -64,22 +63,21 @@ def create_qtc_project_main():
     if SIMPLE_PROJECTFILE:
         # --- qtcreator specific, simple format
         PROJECT_NAME = "Blender"
-        FILE_NAME = PROJECT_NAME.lower()
-        with open(os.path.join(PROJECT_DIR, "%s.files" % FILE_NAME), 'w') as f:
-            f.write("\n".join(files_rel))
+        f = open(os.path.join(PROJECT_DIR, "%s.files" % PROJECT_NAME), 'w')
+        f.write("\n".join(files_rel))
 
-        with open(os.path.join(PROJECT_DIR, "%s.includes" % FILE_NAME), 'w') as f:
-            f.write("\n".join(sorted(list(set(os.path.dirname(f)
-                              for f in files_rel if is_c_header(f))))))
+        f = open(os.path.join(PROJECT_DIR, "%s.includes" % PROJECT_NAME), 'w')
+        f.write("\n".join(sorted(list(set(os.path.dirname(f)
+                          for f in files_rel if is_c_header(f))))))
 
-        qtc_prj = os.path.join(PROJECT_DIR, "%s.creator" % FILE_NAME)
-        with open(qtc_prj, 'w') as f:
-            f.write("[General]\n")
+        qtc_prj = os.path.join(PROJECT_DIR, "%s.creator" % PROJECT_NAME)
+        f = open(qtc_prj, 'w')
+        f.write("[General]\n")
 
-        qtc_cfg = os.path.join(PROJECT_DIR, "%s.config" % FILE_NAME)
+        qtc_cfg = os.path.join(PROJECT_DIR, "%s.config" % PROJECT_NAME)
         if not os.path.exists(qtc_cfg):
-            with open(qtc_cfg, 'w') as f:
-                f.write("// ADD PREDEFINED MACROS HERE!\n")
+            f = open(qtc_cfg, 'w')
+            f.write("// ADD PREDEFINED MACROS HERE!\n")
     else:
         includes, defines = cmake_advanced_info()
 
@@ -98,30 +96,29 @@ def create_qtc_project_main():
             PROJECT_NAME = project_name_get()
 
         FILE_NAME = PROJECT_NAME.lower()
-        with open(os.path.join(PROJECT_DIR, "%s.files" % FILE_NAME), 'w') as f:
-            f.write("\n".join(files_rel))
+        f = open(os.path.join(PROJECT_DIR, "%s.files" % FILE_NAME), 'w')
+        f.write("\n".join(files_rel))
 
-        with open(os.path.join(PROJECT_DIR, "%s.includes" % FILE_NAME), 'w', encoding='utf-8') as f:
-            f.write("\n".join(sorted(includes)))
+        f = open(os.path.join(PROJECT_DIR, "%s.includes" % FILE_NAME), 'w', encoding='utf-8')
+        f.write("\n".join(sorted(includes)))
 
         qtc_prj = os.path.join(PROJECT_DIR, "%s.creator" % FILE_NAME)
-        with open(qtc_prj, 'w') as f:
-            f.write("[General]\n")
+        f = open(qtc_prj, 'w')
+        f.write("[General]\n")
 
         qtc_cfg = os.path.join(PROJECT_DIR, "%s.config" % FILE_NAME)
-        with open(qtc_cfg, 'w') as f:
-            f.write("// ADD PREDEFINED MACROS TO %s_custom.config!\n" % FILE_NAME)
-
-            qtc_custom_cfg = os.path.join(PROJECT_DIR, "%s_custom.config" % FILE_NAME)
-            if os.path.exists(qtc_custom_cfg):
-                with open(qtc_custom_cfg, 'r') as fc:
-                    f.write(fc.read())
-                    f.write("\n")
-
-            defines_final = [("#define %s %s" % (item[0], quote_define(item[1]))) for item in defines]
-            if sys.platform != "win32":
-                defines_final += cmake_compiler_defines()
-            f.write("\n".join(defines_final))
+        f = open(qtc_cfg, 'w')
+        f.write("// ADD PREDEFINED MACROS TO %s_custom.config!\n" % FILE_NAME)
+        qtc_custom_cfg = os.path.join(PROJECT_DIR, "%s_custom.config" % FILE_NAME)
+        if os.path.exists(qtc_custom_cfg):
+            fc = open(qtc_custom_cfg, 'r')
+            f.write(fc.read())
+            fc.close()
+            f.write("\n")
+        defines_final = [("#define %s %s" % (item[0], quote_define(item[1]))) for item in defines]
+        if sys.platform != "win32":
+            defines_final += cmake_compiler_defines()
+        f.write("\n".join(defines_final))
 
     print("Blender project file written to: %r" % qtc_prj)
     # --- end
@@ -136,21 +133,21 @@ def create_qtc_project_python():
     if 0:
         PROJECT_NAME = "Blender_Python"
     else:
-        # be tricky, get the project name from git if we can!
+        # be tricky, get the project name from SVN if we can!
         PROJECT_NAME = project_name_get() + "_Python"
 
     FILE_NAME = PROJECT_NAME.lower()
-    with open(os.path.join(PROJECT_DIR, "%s.files" % FILE_NAME), 'w') as f:
-        f.write("\n".join(files_rel))
+    f = open(os.path.join(PROJECT_DIR, "%s.files" % FILE_NAME), 'w')
+    f.write("\n".join(files_rel))
 
     qtc_prj = os.path.join(PROJECT_DIR, "%s.creator" % FILE_NAME)
-    with open(qtc_prj, 'w') as f:
-        f.write("[General]\n")
+    f = open(qtc_prj, 'w')
+    f.write("[General]\n")
 
     qtc_cfg = os.path.join(PROJECT_DIR, "%s.config" % FILE_NAME)
     if not os.path.exists(qtc_cfg):
-        with open(qtc_cfg, 'w') as f:
-            f.write("// ADD PREDEFINED MACROS HERE!\n")
+        f = open(qtc_cfg, 'w')
+        f.write("// ADD PREDEFINED MACROS HERE!\n")
 
     print("Python project file written to:  %r" % qtc_prj)
 

build_files/cmake/config/blender_full.cmake

@@ -1,62 +0,0 @@
-# turn everything OFF except for python which defaults to ON
-# and is needed for the UI
-#
-# Example usage:
-#   cmake -C../blender/build_files/cmake/config/blender_full.cmake  ../blender
-#
-
-set(WITH_BUILDINFO           ON  CACHE BOOL "" FORCE)
-set(WITH_BULLET              ON  CACHE BOOL "" FORCE)
-set(WITH_CODEC_AVI           ON  CACHE BOOL "" FORCE)
-set(WITH_CODEC_FFMPEG        ON  CACHE BOOL "" FORCE)
-set(WITH_CODEC_SNDFILE       ON  CACHE BOOL "" FORCE)
-set(WITH_CYCLES              ON  CACHE BOOL "" FORCE)
-set(WITH_FFTW3               ON  CACHE BOOL "" FORCE)
-set(WITH_LIBMV               ON  CACHE BOOL "" FORCE)
-set(WITH_GAMEENGINE          ON  CACHE BOOL "" FORCE)
-set(WITH_COMPOSITOR          ON  CACHE BOOL "" FORCE)
-set(WITH_FREESTYLE           ON  CACHE BOOL "" FORCE)
-set(WITH_GHOST_XDND          ON  CACHE BOOL "" FORCE)
-set(WITH_IK_SOLVER           ON  CACHE BOOL "" FORCE)
-set(WITH_IK_ITASC            ON  CACHE BOOL "" FORCE)
-set(WITH_IMAGE_CINEON        ON  CACHE BOOL "" FORCE)
-set(WITH_IMAGE_DDS           ON  CACHE BOOL "" FORCE)
-set(WITH_IMAGE_FRAMESERVER   ON  CACHE BOOL "" FORCE)
-set(WITH_IMAGE_HDR           ON  CACHE BOOL "" FORCE)
-set(WITH_IMAGE_OPENEXR       ON  CACHE BOOL "" FORCE)
-set(WITH_IMAGE_OPENJPEG      ON  CACHE BOOL "" FORCE)
-set(WITH_IMAGE_REDCODE       ON  CACHE BOOL "" FORCE)
-set(WITH_IMAGE_TIFF          ON  CACHE BOOL "" FORCE)
-set(WITH_INPUT_NDOF          ON  CACHE BOOL "" FORCE)
-set(WITH_INTERNATIONAL       ON  CACHE BOOL "" FORCE)
-set(WITH_JACK                ON  CACHE BOOL "" FORCE)
-set(WITH_LZMA                ON  CACHE BOOL "" FORCE)
-set(WITH_LZO                 ON  CACHE BOOL "" FORCE)
-set(WITH_MOD_BOOLEAN         ON  CACHE BOOL "" FORCE)
-set(WITH_MOD_FLUID           ON  CACHE BOOL "" FORCE)
-set(WITH_MOD_REMESH          ON  CACHE BOOL "" FORCE)
-set(WITH_MOD_SMOKE           ON  CACHE BOOL "" FORCE)
-set(WITH_MOD_OCEANSIM        ON  CACHE BOOL "" FORCE)
-set(WITH_AUDASPACE           ON  CACHE BOOL "" FORCE)
-set(WITH_OPENAL              ON  CACHE BOOL "" FORCE)
-set(WITH_OPENCOLLADA         ON  CACHE BOOL "" FORCE)
-set(WITH_OPENCOLORIO         ON  CACHE BOOL "" FORCE)
-set(WITH_OPENMP              ON  CACHE BOOL "" FORCE)
-set(WITH_OPENNL              ON  CACHE BOOL "" FORCE)
-set(WITH_PYTHON_INSTALL      ON  CACHE BOOL "" FORCE)
-set(WITH_RAYOPTIMIZATION     ON  CACHE BOOL "" FORCE)
-set(WITH_SDL                 ON  CACHE BOOL "" FORCE)
-set(WITH_X11_XINPUT          ON  CACHE BOOL "" FORCE)
-set(WITH_X11_XF86VMODE       ON  CACHE BOOL "" FORCE)
-
-set(WITH_PLAYER              ON  CACHE BOOL "" FORCE)
-set(WITH_MEM_JEMALLOC        ON  CACHE BOOL "" FORCE)
-
-if(UNIX AND NOT APPLE)
-	set(WITH_DOC_MANPAGE         ON  CACHE BOOL "" FORCE)
-endif()
-
-if(APPLE)
-	set(WITH_CODEC_QUICKTIME     ON  CACHE BOOL "" FORCE)
-endif()
-

build_files/cmake/config/blender_lite.cmake

@@ -44,7 +44,6 @@ set(WITH_AUDASPACE           OFF CACHE BOOL "" FORCE)
 set(WITH_OPENAL              OFF CACHE BOOL "" FORCE)
 set(WITH_OPENCOLLADA         OFF CACHE BOOL "" FORCE)
 set(WITH_OPENCOLORIO         OFF CACHE BOOL "" FORCE)
-set(WITH_OPENIMAGEIO         OFF CACHE BOOL "" FORCE)
 set(WITH_OPENMP              OFF CACHE BOOL "" FORCE)
 set(WITH_OPENNL              OFF CACHE BOOL "" FORCE)
 set(WITH_PYTHON_INSTALL      OFF CACHE BOOL "" FORCE)

build_files/cmake/macros.cmake

@@ -118,19 +118,6 @@ macro(target_link_libraries_debug TARGET LIBS)
 	unset(_LIB)
 endmacro()
 
-macro(target_link_libraries_decoupled target libraries_var)
-	if(NOT MSVC)
-		target_link_libraries(${target} ${${libraries_var}})
-	else()
-		# For MSVC we link to different libraries depending whether
-		# release or debug target is being built.
-		file_list_suffix(_libraries_debug "${${libraries_var}}" "_d")
-		target_link_libraries_debug(${target} "${_libraries_debug}")
-		target_link_libraries_optimized(${target} "${${libraries_var}}")
-		unset(_libraries_debug)
-	endif()
-endmacro()
-
 # Nicer makefiles with -I/1/foo/ instead of -I/1/2/3/../../foo/
 # use it instead of include_directories()
 macro(blender_include_dirs
@@ -234,7 +221,7 @@ macro(SETUP_LIBDIRS)
 	if(WITH_PYTHON)  #  AND NOT WITH_PYTHON_MODULE  # WIN32 needs
 		link_directories(${PYTHON_LIBPATH})
 	endif()
-	if(WITH_SDL AND NOT WITH_SDL_DYNLOAD)
+	if(WITH_SDL)
 		link_directories(${SDL_LIBPATH})
 	endif()
 	if(WITH_CODEC_FFMPEG)
@@ -296,13 +283,9 @@ macro(setup_liblinks
 	set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${PLATFORM_LINKFLAGS}")
 	set(CMAKE_EXE_LINKER_FLAGS_DEBUG "${CMAKE_EXE_LINKER_FLAGS_DEBUG} ${PLATFORM_LINKFLAGS_DEBUG}")
 
-	set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} ${PLATFORM_LINKFLAGS}")
-	set(CMAKE_SHARED_LINKER_FLAGS_DEBUG "${CMAKE_SHARED_LINKER_FLAGS_DEBUG} ${PLATFORM_LINKFLAGS_DEBUG}")
-
-	set(CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} ${PLATFORM_LINKFLAGS}")
-	set(CMAKE_MODULE_LINKER_FLAGS_DEBUG "${CMAKE_MODULE_LINKER_FLAGS_DEBUG} ${PLATFORM_LINKFLAGS_DEBUG}")
-
 	target_link_libraries(${target}
+			${OPENGL_gl_LIBRARY}
+			${OPENGL_glu_LIBRARY}
 			${PNG_LIBRARIES}
 			${ZLIB_LIBRARIES}
 			${FREETYPE_LIBRARY})
@@ -321,11 +304,8 @@ macro(setup_liblinks
 		endif()
 	endif()
 
-	if(WITH_LZO AND WITH_SYSTEM_LZO)
-		target_link_libraries(${target} ${LZO_LIBRARIES})
-	endif()
 	if(WITH_SYSTEM_GLEW)
-		target_link_libraries(${target} ${BLENDER_GLEW_LIBRARIES})
+		target_link_libraries(${target} ${GLEW_LIBRARY})
 	endif()
 	if(WITH_BULLET AND WITH_SYSTEM_BULLET)
 		target_link_libraries(${target} ${BULLET_LIBRARIES})
@@ -342,7 +322,7 @@ macro(setup_liblinks
 	if(WITH_CODEC_SNDFILE)
 		target_link_libraries(${target} ${SNDFILE_LIBRARIES})
 	endif()
-	if(WITH_SDL AND NOT WITH_SDL_DYNLOAD)
+	if(WITH_SDL)
 		target_link_libraries(${target} ${SDL_LIBRARY})
 	endif()
 	if(WITH_CODEC_QUICKTIME)
@@ -357,9 +337,6 @@ macro(setup_liblinks
 	if(WITH_OPENCOLORIO)
 		target_link_libraries(${target} ${OPENCOLORIO_LIBRARIES})
 	endif()
-	if(WITH_CYCLES_OSL)
-		target_link_libraries(${target} ${OSL_LIBRARIES})
-	endif()
 	if(WITH_BOOST)
 		target_link_libraries(${target} ${BOOST_LIBRARIES})
 		if(Boost_USE_STATIC_LIBS AND Boost_USE_ICU)
@@ -381,6 +358,11 @@ macro(setup_liblinks
 		target_link_libraries(${target} ${OPENJPEG_LIBRARIES})
 	endif()
 	if(WITH_CODEC_FFMPEG)
+
+		# Strange!, without this ffmpeg gives linking errors (on linux)
+		# even though its linked above
+		target_link_libraries(${target} ${OPENGL_glu_LIBRARY})
+
 		target_link_libraries(${target} ${FFMPEG_LIBRARIES})
 	endif()
 	if(WITH_OPENCOLLADA)
@@ -418,29 +400,16 @@ macro(setup_liblinks
 	if(WITH_MOD_CLOTH_ELTOPO)
 		target_link_libraries(${target} ${LAPACK_LIBRARIES})
 	endif()
+	if(WITH_CYCLES_OSL)
+		target_link_libraries(${target} ${OSL_LIBRARIES})
+	endif()
 	if(WITH_LLVM)
 		target_link_libraries(${target} ${LLVM_LIBRARY})
 	endif()
-	if(WITH_ALEMBIC)
-		target_link_libraries(${target} ${ALEMBIC_LIBRARIES})
-	endif()
-	if(WITH_HDF5)
-		target_link_libraries(${target} ${HDF5_LIBRARIES})
-	endif()
 	if(WIN32 AND NOT UNIX)
 		target_link_libraries(${target} ${PTHREADS_LIBRARIES})
 	endif()
 
-	# We put CLEW and CUEW here because OPENSUBDIV_LIBRARIES dpeends on them..
-	if(WITH_CYCLES OR WITH_COMPOSITOR OR WITH_OPENSUBDIV)
-		target_link_libraries(${target} "extern_clew")
-		target_link_libraries(${target} "extern_cuew")
-	endif()
-
-	#system libraries with no dependencies such as platform link libs or opengl should go last
-	target_link_libraries(${target}
-			${BLENDER_GL_LIBRARIES})
-
 	target_link_libraries(${target} ${PLATFORM_LINKLIBS} ${CMAKE_DL_LIBS})
 endmacro()
 
@@ -504,7 +473,6 @@ macro(SETUP_BLENDER_SORTED_LIBS)
 		bf_editor_object
 		bf_editor_armature
 		bf_editor_physics
-		bf_editor_hair
 		bf_editor_render
 		bf_editor_screen
 		bf_editor_sculpt_paint
@@ -519,19 +487,17 @@ macro(SETUP_BLENDER_SORTED_LIBS)
 		bf_python_ext
 		bf_python_mathutils
 		bf_python_bmesh
+		bf_python_bparticles
 		bf_freestyle
 		bf_ikplugin
 		bf_modifiers
 		bf_bmesh
-		bf_gpu
 		bf_blenkernel
-		bf_physics
 		bf_nodes
-		bf_rna
+		bf_gpu
 		bf_blenloader
 		bf_imbuf
 		bf_blenlib
-		bf_depsgraph
 		bf_intern_ghost
 		bf_intern_string
 		bf_avi
@@ -550,6 +516,7 @@ macro(SETUP_BLENDER_SORTED_LIBS)
 		ge_phys_dummy
 		ge_phys_bullet
 		bf_intern_smoke
+		extern_minilzo
 		extern_lzma
 		extern_colamd
 		ge_logic_ketsji
@@ -566,10 +533,9 @@ macro(SETUP_BLENDER_SORTED_LIBS)
 		extern_openjpeg
 		extern_redcode
 		ge_videotex
+		bf_rna
 		bf_dna
 		bf_blenfont
-		bf_pointcache_alembic
-		bf_pointcache
 		bf_intern_audaspace
 		bf_intern_mikktspace
 		bf_intern_dualcon
@@ -586,9 +552,6 @@ macro(SETUP_BLENDER_SORTED_LIBS)
 		extern_wcwidth
 		extern_libmv
 		extern_glog
-		extern_sdlew
-
-		bf_intern_glew_mx
 	)
 
 	if(WITH_COMPOSITOR)
@@ -605,12 +568,8 @@ macro(SETUP_BLENDER_SORTED_LIBS)
 		list(APPEND BLENDER_SORTED_LIBS extern_eltopo)
 	endif()
 
-	if(NOT WITH_SYSTEM_LZO)
-		list(APPEND BLENDER_SORTED_LIBS extern_minilzo)
-	endif()
-
 	if(NOT WITH_SYSTEM_GLEW)
-		list(APPEND BLENDER_SORTED_LIBS ${BLENDER_GLEW_LIBRARIES})
+		list(APPEND BLENDER_SORTED_LIBS extern_glew)
 	endif()
 
 	if(WITH_BINRELOC)
@@ -754,8 +713,6 @@ macro(TEST_SSE_SUPPORT
 endmacro()
 
 macro(TEST_STDBOOL_SUPPORT)
-	include(CheckCSourceRuns)
-
 	# This program will compile correctly if and only if
 	# this C compiler supports C99 stdbool.
 	check_c_source_runs("
@@ -941,7 +898,6 @@ macro(remove_strict_flags)
 		remove_cc_flag("-Wstrict-prototypes")
 		remove_cc_flag("-Wmissing-prototypes")
 		remove_cc_flag("-Wunused-parameter")
-		remove_cc_flag("-Wunused-macros")
 		remove_cc_flag("-Wwrite-strings")
 		remove_cc_flag("-Wredundant-decls")
 		remove_cc_flag("-Wundef")
@@ -971,20 +927,6 @@ macro(remove_strict_flags)
 
 endmacro()
 
-macro(remove_extra_strict_flags)
-	if(CMAKE_COMPILER_IS_GNUCC)
-		remove_cc_flag("-Wunused-parameter")
-	endif()
-
-	if(CMAKE_C_COMPILER_ID MATCHES "Clang")
-		remove_cc_flag("-Wunused-parameter")
-	endif()
-
-	if(MSVC)
-		# TODO
-	endif()
-endmacro()
-
 # note, we can only append flags on a single file so we need to negate the options.
 # at the moment we cant shut up ffmpeg deprecations, so use this, but will
 # probably add more removals here.
@@ -1045,16 +987,7 @@ macro(ADD_CHECK_CXX_COMPILER_FLAG
 	endif()
 endmacro()
 
-function(get_blender_version)
-	# extracts header vars and defines them in the parent scope:
-	#
-	# - BLENDER_VERSION (major.minor)
-	# - BLENDER_VERSION_MAJOR
-	# - BLENDER_VERSION_MINOR
-	# - BLENDER_SUBVERSION (used for internal versioning mainly)
-	# - BLENDER_VERSION_CHAR (a, b, c, ...or empty string)
-	# - BLENDER_VERSION_CYCLE (alpha, beta, rc, release)
-
+macro(get_blender_version)
 	# So cmake depends on BKE_blender.h, beware of inf-loops!
 	CONFIGURE_FILE(${CMAKE_SOURCE_DIR}/source/blender/blenkernel/BKE_blender.h
 	               ${CMAKE_BINARY_DIR}/source/blender/blenkernel/BKE_blender.h.done)
@@ -1087,29 +1020,33 @@ function(get_blender_version)
 		message(FATAL_ERROR "Version parsing failed for BLENDER_VERSION_CYCLE")
 	endif()
 
-	math(EXPR _out_version_major "${_out_version} / 100")
-	math(EXPR _out_version_minor "${_out_version} % 100")
+	math(EXPR BLENDER_VERSION_MAJOR "${_out_version} / 100")
+	math(EXPR BLENDER_VERSION_MINOR "${_out_version} % 100")
+	set(BLENDER_VERSION "${BLENDER_VERSION_MAJOR}.${BLENDER_VERSION_MINOR}")
+
+	set(BLENDER_SUBVERSION ${_out_subversion})
+	set(BLENDER_VERSION_CHAR ${_out_version_char})
+	set(BLENDER_VERSION_CYCLE ${_out_version_cycle})
 
 	# for packaging, alpha to numbers
-	string(COMPARE EQUAL "${_out_version_char}" "" _out_version_char_empty)
+	string(COMPARE EQUAL "${BLENDER_VERSION_CHAR}" "" _out_version_char_empty)
 	if(${_out_version_char_empty})
-		set(_out_version_char_index "0")
+		set(BLENDER_VERSION_CHAR_INDEX "0")
 	else()
 		set(_char_ls a b c d e f g h i j k l m n o p q r s t u v w x y z)
-		list(FIND _char_ls ${_out_version_char} _out_version_char_index)
-		math(EXPR _out_version_char_index "${_out_version_char_index} + 1")
+		list(FIND _char_ls ${BLENDER_VERSION_CHAR} _out_version_char_index)
+		math(EXPR BLENDER_VERSION_CHAR_INDEX "${_out_version_char_index} + 1")
+		unset(_char_ls)
+		unset(_out_version_char_index)
 	endif()
 
-	# output vars
-	set(BLENDER_VERSION "${_out_version_major}.${_out_version_minor}" PARENT_SCOPE)
-	set(BLENDER_VERSION_MAJOR "${_out_version_major}" PARENT_SCOPE)
-	set(BLENDER_VERSION_MINOR "${_out_version_minor}" PARENT_SCOPE)
-	set(BLENDER_SUBVERSION "${_out_subversion}" PARENT_SCOPE)
-	set(BLENDER_VERSION_CHAR "${_out_version_char}" PARENT_SCOPE)
-	set(BLENDER_VERSION_CHAR_INDEX "${_out_version_char_index}" PARENT_SCOPE)
-	set(BLENDER_VERSION_CYCLE "${_out_version_cycle}" PARENT_SCOPE)
+	unset(_out_subversion)
+	unset(_out_version_char)
+	unset(_out_version_char_empty)
+	unset(_out_version_cycle)
 
-endfunction()
+	# message(STATUS "Version (Internal): ${BLENDER_VERSION}.${BLENDER_SUBVERSION}, Version (external): ${BLENDER_VERSION}${BLENDER_VERSION_CHAR}-${BLENDER_VERSION_CYCLE}")
+endmacro()
 
 
 # hacks to override initial project settings
@@ -1146,7 +1083,7 @@ endmacro()
 macro(blender_project_hack_post)
 	# --------------
 	# MINGW HACK END
-	if(_reset_standard_libraries)
+	if (_reset_standard_libraries)
 		# Must come after projecINCt(...)
 		#
 		# MINGW workaround for -ladvapi32 being included which surprisingly causes
@@ -1206,7 +1143,6 @@ macro(delayed_install
 		endif()
 		set_property(GLOBAL APPEND PROPERTY DELAYED_INSTALL_DESTINATIONS ${destination})
 	endforeach()
-	unset(f)
 endmacro()
 
 # note this is a function instead of a macro so that ${BUILD_TYPE} in targetdir
@@ -1226,7 +1162,6 @@ function(delayed_do_install
 			list(GET destinations ${i} d)
 			install(FILES ${f} DESTINATION ${targetdir}/${d})
 		endforeach()
-		unset(f)
 	endif()
 endfunction()
 
@@ -1390,65 +1325,3 @@ macro(msgfmt_simple
 	unset(_file_to)
 	unset(_file_to_path)
 endmacro()
-
-macro(find_python_package
-      package)
-
-	string(TOUPPER ${package} _upper_package)
-
-	# set but invalid
-	if((NOT ${PYTHON_${_upper_package}_PATH} STREQUAL "") AND
-	   (NOT ${PYTHON_${_upper_package}_PATH} MATCHES NOTFOUND))
-#		if(NOT EXISTS "${PYTHON_${_upper_package}_PATH}/${package}")
-#			message(WARNING "PYTHON_${_upper_package}_PATH is invalid, ${package} not found in '${PYTHON_${_upper_package}_PATH}' "
-#			                "WITH_PYTHON_INSTALL_${_upper_package} option will be ignored when installing python")
-#			set(WITH_PYTHON_INSTALL${_upper_package} OFF)
-#		endif()
-	# not set, so initialize
-	else()
-		string(REPLACE "." ";" _PY_VER_SPLIT "${PYTHON_VERSION}")
-		list(GET _PY_VER_SPLIT 0 _PY_VER_MAJOR)
-
-		# re-cache
-		unset(PYTHON_${_upper_package}_PATH CACHE)
-		find_path(PYTHON_${_upper_package}_PATH
-		  NAMES
-		    ${package}
-		  HINTS
-		    "${PYTHON_LIBPATH}/python${PYTHON_VERSION}/"
-		    "${PYTHON_LIBPATH}/python${_PY_VER_MAJOR}/"
-		  PATH_SUFFIXES
-		    site-packages
-		    dist-packages
-		   NO_DEFAULT_PATH
-		)
-
-		 if(NOT EXISTS "${PYTHON_${_upper_package}_PATH}")
-			message(WARNING "'${package}' path could not be found in:\n"
-			                "'${PYTHON_LIBPATH}/python${PYTHON_VERSION}/site-packages/${package}', "
-			                "'${PYTHON_LIBPATH}/python${_PY_VER_MAJOR}/site-packages/${package}', "
-			                "'${PYTHON_LIBPATH}/python${PYTHON_VERSION}/dist-packages/${package}', "
-			                "'${PYTHON_LIBPATH}/python${_PY_VER_MAJOR}/dist-packages/${package}', "
-			                "WITH_PYTHON_INSTALL_${_upper_package} option will be ignored when installing python")
-			set(WITH_PYTHON_INSTALL_${_upper_package} OFF)
-		else()
-			message(STATUS "${package} found at '${PYTHON_${_upper_package}_PATH}'")
-		endif()
-
-		unset(_PY_VER_SPLIT)
-		unset(_PY_VER_MAJOR)
-	  endif()
-
-	  unset(_upper_package)
-endmacro()
-
-# like Python's 'print(dir())'
-macro(print_all_vars)
-	get_cmake_property(_vars VARIABLES)
-	foreach(_var ${_vars})
-		message("${_var}=${${_var}}")
-	endforeach()
-	unset(_vars)
-	unset(_var)
-endmacro()
-

build_files/cmake/packaging.cmake

@@ -2,6 +2,7 @@ set(PROJECT_DESCRIPTION  "Blender is a very fast and versatile 3D modeller/rende
 set(PROJECT_COPYRIGHT    "Copyright (C) 2001-2012 Blender Foundation")
 set(PROJECT_CONTACT      "foundation@blender.org")
 set(PROJECT_VENDOR       "Blender Foundation")
+set(ORG_WEBSITE          "www.blender.org")
 
 set(MAJOR_VERSION ${BLENDER_VERSION_MAJOR})
 set(MINOR_VERSION ${BLENDER_VERSION_MINOR})
@@ -27,12 +28,10 @@ if(EXISTS ${CMAKE_SOURCE_DIR}/.git/)
 		execute_process(COMMAND git rev-parse --short @{u}
 		                WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
 		                OUTPUT_VARIABLE MY_WC_HASH
-		                OUTPUT_STRIP_TRAILING_WHITESPACE
-		                ERROR_QUIET)
+		                OUTPUT_STRIP_TRAILING_WHITESPACE)
 	endif()
 endif()
 set(BUILD_REV ${MY_WC_HASH})
-unset(MY_WC_HASH)
 
 
 # Force Package Name
@@ -42,7 +41,7 @@ set(CPACK_PACKAGE_FILE_NAME ${PROJECT_NAME}-${MAJOR_VERSION}.${MINOR_VERSION}.${
 if(CMAKE_SYSTEM_NAME MATCHES "Linux")
 	# RPM packages
 	include(build_files/cmake/RpmBuild.cmake)
-	if(RPMBUILD_FOUND)
+	if(RPMBUILD_FOUND AND NOT WIN32)
 		set(CPACK_GENERATOR "RPM")
 		set(CPACK_RPM_PACKAGE_RELEASE "git${CPACK_DATE}.${BUILD_REV}")
 		set(CPACK_SET_DESTDIR "true")
@@ -62,25 +61,7 @@ if(APPLE)
 	set(CPACK_COMPONENT_LIBRARIES_HIDDEN TRUE)
 endif()
 
-if(WIN32)
-	set(CPACK_PACKAGE_INSTALL_DIRECTORY "Blender Foundation/Blender")
-	set(CPACK_PACKAGE_INSTALL_REGISTRY_KEY "Blender Foundation/Blender")
-
-	set(CPACK_NSIS_MUI_ICON ${CMAKE_SOURCE_DIR}/source/icons/winblender.ico)
-	set(CPACK_NSIS_COMPRESSOR "/SOLID lzma")
-
-	set(CPACK_RESOURCE_FILE_LICENSE ${CMAKE_SOURCE_DIR}/release/text/GPL-license.txt)
-	set(CPACK_WIX_PRODUCT_ICON ${CMAKE_SOURCE_DIR}/source/icons/winblender.ico)
-	set(CPACK_WIX_UPGRADE_GUID "B767E4FD-7DE7-4094-B051-3AE62E13A17A")
-
-	set(CPACK_WIX_UI_BANNER ${LIBDIR}/package/installer_wix/WIX_UI_BANNER.bmp)
-	set(CPACK_WIX_UI_DIALOG ${LIBDIR}/package/installer_wix/WIX_UI_DIALOG.bmp)
-
-	#force lzma instead of deflate
-	set(CPACK_WIX_LIGHT_EXTRA_FLAGS -dcl:high)
-endif()
-
-set(CPACK_PACKAGE_EXECUTABLES "blender" "blender")
+set(CPACK_PACKAGE_EXECUTABLES "blender")
 include(CPack)
 
 # Target for build_archive.py script, to automatically pass along
@@ -95,8 +76,6 @@ macro(add_package_archive packagename extension)
 		OUTPUT ${package_output}
 		COMMAND ${build_archive} ${packagename} ${extension} bin release
 		WORKING_DIRECTORY ${CMAKE_BINARY_DIR})
-	unset(build_archive)
-	unset(package_output)
 endmacro()
 
 if(APPLE)
@@ -112,9 +91,3 @@ elseif(UNIX)
 		"tar.bz2")
 endif()
 
-unset(MAJOR_VERSION)
-unset(MINOR_VERSION)
-unset(PATCH_VERSION)
-
-unset(BUILD_REV)
-

build_files/package_spec/build_archive.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/python
 
 # <pep8 compliant>
 

build_files/package_spec/pacman/PKGBUILD

@@ -12,12 +12,12 @@ blender_version_char=$(sed -ne 's/.*BLENDER_VERSION_CHAR.*\([a-z]\)$/\1/p' $blen
 # map the version a -> 1
 # not to be confused with blender's internal subversions
 if [ "$blender_version_char" ]; then
-  blender_version_full=${blender_version}.$(expr index abcdefghijklmnopqrstuvwxyz $blender_version_char)
+    blender_version_full=${blender_version}.$(expr index abcdefghijklmnopqrstuvwxyz $blender_version_char)
 else
-  blender_version_full=${blender_version}
+	blender_version_full=${blender_version}
 fi
 
-blender_ver_string=$blender_version+git$blender_version_full
+blender_ver_string=$blender_version+svn$blender_version_full
 
 pkgname=blender-snapshot
 pkgver=$blender_ver_string
@@ -27,8 +27,8 @@ arch=('i686' 'x86_64')
 url="www.blender.org"
 license=('GPL')
 groups=()
-depends=('libjpeg' 'libpng' 'openjpeg' 'libtiff' 'openexr'  'python>=3.4' 'gettext' 'libxi' 'libxmu' 'mesa' 'freetype2' 'openal' 'sdl' 'libsndfile' 'ffmpeg')
-makedepends=('cmake' 'git')
+depends=('libjpeg' 'libpng' 'openjpeg' 'libtiff' 'openexr'  'python>=3.2' 'gettext' 'libxi' 'libxmu' 'mesa' 'freetype2' 'openal' 'sdl' 'libsndfile' 'ffmpeg')
+makedepends=('cmake' 'svn')
 optdepends=()
 provides=()
 conflicts=('blender')
@@ -36,7 +36,7 @@ replaces=('blender')
 backup=()
 options=()
 install=blender.install
-# use current git to make the package.
+# use current svn to make the package.
 # source=(http://download.blender.org/source/$pkgname-$pkgver.tar.gz)
 # md5sums=('27edb80c82c25252d43d6a01980d953a') #generate with 'makepkg -g'
 source=()
@@ -51,7 +51,11 @@ build() {
     -DCMAKE_BUILD_TYPE:STRING=Release \
     -DWITH_INSTALL_PORTABLE:BOOL=OFF \
     -DWITH_PYTHON_INSTALL:BOOL=OFF \
-    -DWITH_OPENCOLLADA:BOOL=OFF
+    -DWITH_OPENCOLLADA:BOOL=OFF \
+	-DPYTHON_VERSION:STRING=3.2 \
+	-DPYTHON_LIBPATH:STRING=/usr/lib \
+	-DPYTHON_LIBRARY:STRING=python3.2mu \
+	-DPYTHON_INCLUDE_DIRS:STRING=/usr/include/python3.2mu
 
   make $MAKEFLAGS
 }
@@ -60,7 +64,7 @@ package() {
   cd $srcdir/build
   make DESTDIR="$pkgdir" install
   python -m compileall \
-  $pkgdir/usr/share/blender/$blender_version/scripts/startup \
-  $pkgdir/usr/share/blender/$blender_version/scripts/modules \
-  $pkgdir/usr/share/blender/$blender_version/scripts/addons
+	$pkgdir/usr/share/blender/$blender_version/scripts/startup \
+	$pkgdir/usr/share/blender/$blender_version/scripts/modules \
+	$pkgdir/usr/share/blender/$blender_version/scripts/addons
 }

build_files/scons/config/darwin-config.py

@@ -68,7 +68,7 @@ BF_SNDFILE_LIBPATH = '${BF_SNDFILE}/lib ${BF_FFMPEG}/lib' #ogg libs are stored i
 WITH_BF_SDL = True
 BF_SDL = LIBDIR + '/sdl' #$(shell sdl-config --prefix)
 BF_SDL_INC = '${BF_SDL}/include' #$(shell $(BF_SDL)/bin/sdl-config --cflags)
-BF_SDL_LIB = 'SDL2' #BF_SDL #$(shell $(BF_SDL)/bin/sdl-config --libs) -lSDL_mixer
+BF_SDL_LIB = 'SDL' #BF_SDL #$(shell $(BF_SDL)/bin/sdl-config --libs) -lSDL_mixer
 BF_SDL_LIBPATH = '${BF_SDL}/lib'
 
 WITH_BF_OPENEXR = True
@@ -154,7 +154,7 @@ BF_COLLADA_INC = '${BF_COLLADA}'
 BF_COLLADA_LIB = 'bf_collada'
 BF_OPENCOLLADA = LIBDIR + '/opencollada'
 BF_OPENCOLLADA_INC = '${BF_OPENCOLLADA}/include'
-BF_OPENCOLLADA_LIB = 'OpenCOLLADASaxFrameworkLoader OpenCOLLADAFramework OpenCOLLADABaseUtils OpenCOLLADAStreamWriter MathMLSolver GeneratedSaxParser xml2 buffer ftoa'
+BF_OPENCOLLADA_LIB = 'OpenCOLLADASaxFrameworkLoader OpenCOLLADAFramework OpenCOLLADABaseUtils OpenCOLLADAStreamWriter MathMLSolver GeneratedSaxParser UTF xml2 buffer ftoa'
 BF_OPENCOLLADA_LIBPATH = LIBDIR + '/opencollada'
 BF_PCRE = LIBDIR + '/opencollada'
 BF_PCRE_LIB = 'pcre'
@@ -181,7 +181,7 @@ WITH_BF_LLVM = True
 BF_LLVM = LIBDIR + '/llvm'
 BF_LLVM_LIB = 'LLVMBitReader LLVMJIT LLVMipo LLVMVectorize LLVMBitWriter LLVMX86CodeGen LLVMX86Desc LLVMX86Info LLVMX86AsmPrinter ' + \
     'LLVMX86Utils LLVMSelectionDAG LLVMCodeGen LLVMScalarOpts LLVMInstCombine LLVMTransformUtils LLVMipa LLVMAnalysis LLVMExecutionEngine ' + \
-    'LLVMTarget LLVMMC LLVMCore LLVMSupport LLVMObject'
+    'LLVMTarget LLVMMC LLVMCore LLVMSupport'
 BF_LLVM_LIBPATH = '${BF_LLVM}/lib'
 
 WITH_BF_OIIO = True
@@ -205,7 +205,7 @@ BF_BOOST_LIBPATH = '${BF_BOOST}/lib'
 
 WITH_BF_CYCLES_CUDA_BINARIES = False
 BF_CYCLES_CUDA_NVCC = '/usr/local/cuda/bin/nvcc'
-BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50', 'sm_52']
+BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50']
 
 #Freestyle
 WITH_BF_FREESTYLE = True
@@ -237,7 +237,7 @@ LLIBS = ['stdc++']
 
 REL_CFLAGS = []
 REL_CXXFLAGS = []
-REL_CCFLAGS = ['-O2']
+REL_CCFLAGS = ['-DNDEBUG', '-O2']
 
 CC_WARN = ['-Wall']
 C_WARN = ['-Wno-char-subscripts', '-Wpointer-arith', '-Wcast-align', '-Wdeclaration-after-statement', '-Wno-unknown-pragmas', '-Wstrict-prototypes']
@@ -253,7 +253,7 @@ BF_PROFILE_LINKFLAGS = ['-pg']
 BF_PROFILE = False
 
 BF_DEBUG = False
-BF_DEBUG_CCFLAGS = ['-g']
+BF_DEBUG_CCFLAGS = ['-g', '-D_DEBUG']
 
 #############################################################################
 ###################           Output directories           ##################

build_files/scons/config/linux-config.py

@@ -52,9 +52,9 @@ BF_OPENEXR = '/usr'
 # BF_OPENEXR_INC = '${BF_OPENEXR}/include/OpenEXR ${BF_OPENEXR}/include'
 
 BF_OPENEXR_INC = '${BF_OPENEXR}/include/OpenEXR'
-BF_OPENEXR_LIB = 'Half IlmImf-2_1 Iex-2_1 Imath-2_1 '
+BF_OPENEXR_LIB = 'Half IlmImf Iex Imath '
 BF_OPENEXR_LIB_STATIC = '${BF_OPENEXR}/lib/libHalf.a ${BF_OPENEXR}/lib/libIlmImf.a ${BF_OPENEXR}/lib/libIex.a ${BF_OPENEXR}/lib/libImath.a ${BF_OPENEXR}/lib/libIlmThread.a'
-BF_OPENEXR_LIBPATH = '${BF_OPENEXR}/lib'
+# BF_OPENEXR_LIBPATH = '${BF_OPENEXR}/lib'
 
 
 WITH_BF_DDS = True
@@ -144,7 +144,7 @@ BF_REDCODE_LIB = ''
 BF_REDCODE_INC = '${BF_REDCODE}/../' #C files request "libredcode/format.h" which is in "#extern/libredcode/format.h", stupid but compiles for now.
 BF_REDCODE_LIBPATH='${BF_REDCODE}/lib'
 
-# Mesa Libs should go here if you're using them as well....
+# Mesa Libs should go here if your using them as well....
 WITH_BF_STATICOPENGL = False
 BF_OPENGL = '/usr'
 BF_OPENGL_INC = '${BF_OPENGL}/include'
@@ -197,7 +197,7 @@ BF_BOOST = '/usr'
 BF_BOOST_INC = '${BF_BOOST}/include'
 BF_BOOST_LIB = 'boost_filesystem boost_regex boost_system boost_thread boost_date_time'
 BF_BOOST_LIB_STATIC = '${BF_BOOST_LIBPATH}/libboost_filesystem.a ${BF_BOOST_LIBPATH}/libboost_date_time.a ' + \
-    '${BF_BOOST_LIBPATH}/libboost_regex.a ${BF_BOOST_LIBPATH}/libboost_locale.a ${BF_BOOST_LIBPATH}/libboost_system.a ' + \
+    '${BF_BOOST_LIBPATH}/libboost_regex.a ${BF_BOOST_LIBPATH}/libboost_locale.a ${BF_BOOST_LIBPATH}/libboost_system.a' + \
     '${BF_BOOST_LIBPATH}/libboost_thread.a'
 BF_BOOST_LIB_INTERNATIONAL = 'boost_locale'
 BF_BOOST_LIBPATH = '${BF_BOOST}/lib'
@@ -226,25 +226,11 @@ BF_3DMOUSE_LIB_STATIC = '${BF_3DMOUSE_LIBPATH}/libspnav.a'
 #Freestyle
 WITH_BF_FREESTYLE = True
 
-# HDF5
-WITH_BF_HDF5 = True
-BF_HDF5 = '/usr'
-BF_HDF5_LIB = 'hdf5 hdf5_hl'
-BF_HDF5_LIBPATH='${BF_HDF5}/lib'
-
-# Alembic
-WITH_BF_ALEMBIC = True
-BF_ALEMBIC = '/opt/lib/alembic'
-BF_ALEMBIC_LIB = 'AlembicAbcGeom AlembicAbc AlembicAbcCollection AlembicAbcCoreFactory AlembicAbcCoreHDF5 AlembicAbcCoreAbstract AlembicAbcCoreOgawa AlembicAbcMaterial AlembicOgawa AlembicUtil'
-BF_ALEMBIC_INC = '${BF_ALEMBIC}/include'
-BF_ALEMBIC_LIBPATH='${BF_ALEMBIC}/lib/static'
-
 ##
 CC = 'gcc'
 CXX = 'g++'
 
-CCFLAGS = ['-pipe','-fPIC','-funsigned-char','-fno-strict-aliasing', '-D_LARGEFILE_SOURCE', '-D_FILE_OFFSET_BITS=64','-D_LARGEFILE64_SOURCE']
-CFLAGS = ['-std=gnu89']
+CCFLAGS = ['-pipe','-fPIC','-funsigned-char','-fno-strict-aliasing','-D_LARGEFILE_SOURCE', '-D_FILE_OFFSET_BITS=64','-D_LARGEFILE64_SOURCE']
 CXXFLAGS = []
 
 CPPFLAGS = []
@@ -255,7 +241,7 @@ if WITH_BF_FFMPEG:
     CXXFLAGS += ['-D__STDC_CONSTANT_MACROS', ]
 REL_CFLAGS = []
 REL_CXXFLAGS = []
-REL_CCFLAGS = ['-O2']
+REL_CCFLAGS = ['-DNDEBUG', '-O2']
 
 C_WARN = ['-Wno-char-subscripts', '-Wdeclaration-after-statement', '-Wunused-parameter', '-Wstrict-prototypes', '-Werror=declaration-after-statement', '-Werror=implicit-function-declaration', '-Werror=return-type']
 CC_WARN = ['-Wall']
@@ -268,7 +254,7 @@ BF_PROFILE_CCFLAGS = ['-pg','-g']
 BF_PROFILE_LINKFLAGS = ['-pg']
 
 BF_DEBUG = False
-BF_DEBUG_CCFLAGS = ['-g']
+BF_DEBUG_CCFLAGS = ['-g', '-D_DEBUG']
 
 BF_BUILDDIR = '../build/linux'
 BF_INSTALLDIR='../install/linux'
@@ -276,6 +262,6 @@ BF_INSTALLDIR='../install/linux'
 #Link against pthread
 PLATFORM_LINKFLAGS = ['-pthread']
 
-#Fix for LLVM conflict with Mesa llvmpipe, SDL dynload also requires symbols to be hidden.
-# TODO(sergey): Move this to SConstruct, so we can have this line depended on user config.
-PLATFORM_LINKFLAGS += ['-Wl,--version-script=source/creator/blender.map']
+#Fix for LLVM conflict with Mesa llvmpipe
+if WITH_BF_LLVM:
+    PLATFORM_LINKFLAGS += ['-Wl,--version-script=source/creator/blender.map']

build_files/scons/config/win32-mingw-config.py

@@ -170,8 +170,6 @@ BF_BOOST_LIBPATH = '${BF_BOOST}/lib'
 WITH_BF_RAYOPTIMIZATION = True
 BF_RAYOPTIMIZATION_SSE_FLAGS = ['-msse']
 
-WITH_BF_IME = True
-
 WITH_BF_OPENMP = True
 
 #CUDA
@@ -192,16 +190,13 @@ CXXFLAGS = []
 CPPFLAGS = ['-DWIN32', '-DFREE_WINDOWS', '-D_LARGEFILE_SOURCE', '-D_FILE_OFFSET_BITS=64', '-D_LARGEFILE64_SOURCE', '-DBOOST_ALL_NO_LIB', '-DBOOST_THREAD_USE_LIB', '-DGLEW_STATIC', '-DOPJ_STATIC']
 REL_CFLAGS = []
 REL_CXXFLAGS = []
-REL_CCFLAGS = ['-O2']
+REL_CCFLAGS = ['-DNDEBUG',  '-O2']
 
 C_WARN = ['-Wno-char-subscripts', '-Wdeclaration-after-statement', '-Wstrict-prototypes']
 
 CC_WARN = [ '-Wall' ]
 
-LLIBS = ['-lshell32', '-lshfolder', '-lgdi32', '-lmsvcrt', '-lwinmm', '-lmingw32', '-lm', '-lws2_32', '-lz', '-lstdc++','-lole32','-luuid', '-lwsock32', '-lpsapi', '-ldbghelp']
-
-if WITH_BF_IME:
-    LLIBS.append('-limm32')
+LLIBS = ['-lshell32', '-lshfolder', '-lgdi32', '-lmsvcrt', '-lwinmm', '-lmingw32', '-lm', '-lws2_32', '-lz', '-lstdc++','-lole32','-luuid', '-lwsock32', '-lpsapi']
 
 PLATFORM_LINKFLAGS = ['-Xlinker', '--stack=2097152']
 
@@ -210,7 +205,7 @@ PLATFORM_LINKFLAGS = ['-Xlinker', '--stack=2097152']
 # PLATFORM_LINKFLAGS += ["-static-libgcc", "-static-libstdc++"]
 
 BF_DEBUG = False
-BF_DEBUG_CCFLAGS= ['-g']
+BF_DEBUG_CCFLAGS= ['-g', '-D_DEBUG']
 
 BF_PROFILE_CCFLAGS = ['-pg', '-g']
 BF_PROFILE_LINKFLAGS = ['-pg']

build_files/scons/config/win32-vc-config.py

@@ -6,6 +6,9 @@ CL_STDOUT, CL_STDERR = CL_OUT.communicate()
 if "18.00." in CL_STDERR:
     VC_VERSION = '12.0'
     LCGDIR = '#../lib/windows_vc12'
+elif "15.00." in  CL_STDERR:
+    VC_VERSION = '9.0'
+    LCGDIR = '#../lib/windows'
 else:
     import sys
     print("Visual C version not supported {}\n".format(CL_STDERR))
@@ -33,7 +36,7 @@ WITH_BF_PYTHON_INSTALL_NUMPY = True
 WITH_BF_OPENAL = True
 BF_OPENAL = LIBDIR + '/openal'
 BF_OPENAL_INC = '${BF_OPENAL}/include '
-BF_OPENAL_LIB = 'OpenAL32'
+BF_OPENAL_LIB = 'wrap_oal'
 BF_OPENAL_LIBPATH = '${BF_OPENAL}/lib'
 
 WITH_BF_ICONV = True
@@ -57,7 +60,7 @@ BF_SNDFILE_LIBPATH = '${BF_SNDFILE}/lib'
 WITH_BF_SDL = True
 BF_SDL = LIBDIR + '/sdl'
 BF_SDL_INC = '${BF_SDL}/include'
-BF_SDL_LIB = 'SDL2.lib'
+BF_SDL_LIB = 'SDL.lib'
 BF_SDL_LIBPATH = '${BF_SDL}/lib'
 
 BF_PTHREADS = LIBDIR + '/pthreads'
@@ -69,7 +72,10 @@ WITH_BF_OPENEXR = True
 WITH_BF_STATICOPENEXR = False
 BF_OPENEXR = LIBDIR + '/openexr'
 BF_OPENEXR_INC = '${BF_OPENEXR}/include ${BF_OPENEXR}/include/OpenEXR '
-BF_OPENEXR_LIB = ' Iex-2_2 Half IlmImf-2_2 Imath-2_2 IlmThread-2_2 '
+if VC_VERSION == '12.0':
+    BF_OPENEXR_LIB = ' Iex-2_1 Half IlmImf-2_1 Imath-2_1 IlmThread-2_1 '
+else:
+    BF_OPENEXR_LIB = ' Iex Half IlmImf Imath IlmThread '
 BF_OPENEXR_LIBPATH = '${BF_OPENEXR}/lib'
 BF_OPENEXR_LIB_STATIC = '${BF_OPENEXR}/lib/libHalf.a ${BF_OPENEXR}/lib/libIlmImf.a ${BF_OPENEXR}/lib/libIex.a ${BF_OPENEXR}/lib/libImath.a ${BF_OPENEXR}/lib/libIlmThread.a'
 
@@ -148,11 +154,9 @@ BF_COLLADA_LIB = 'bf_collada'
 
 BF_OPENCOLLADA = LIBDIR + '/opencollada'
 BF_OPENCOLLADA_INC = '${BF_OPENCOLLADA}/include/opencollada'
-BF_OPENCOLLADA_LIB = 'OpenCOLLADAStreamWriter OpenCOLLADASaxFrameworkLoader OpenCOLLADAFramework OpenCOLLADABaseUtils GeneratedSaxParser MathMLSolver xml pcre buffer ftoa'
+BF_OPENCOLLADA_LIB = 'OpenCOLLADAStreamWriter OpenCOLLADASaxFrameworkLoader OpenCOLLADAFramework OpenCOLLADABaseUtils GeneratedSaxParser MathMLSolver xml pcre buffer ftoa UTF'
 BF_OPENCOLLADA_LIBPATH = '${BF_OPENCOLLADA}/lib/opencollada'
 
-WITH_BF_IME = True
-
 WITH_BF_3DMOUSE = True
 
 WITH_BF_OPENMP = True
@@ -192,14 +196,18 @@ WITH_BF_STATICOCIO = True
 WITH_BF_BOOST = True
 BF_BOOST = '${LIBDIR}/boost'
 BF_BOOST_INC = '${BF_BOOST}/include'
-BF_BOOST_LIB = 'libboost_date_time-vc120-mt-s-1_55 libboost_filesystem-vc120-mt-s-1_55 libboost_regex-vc120-mt-s-1_55 libboost_system-vc120-mt-s-1_55 libboost_thread-vc120-mt-s-1_55 libboost_wave-vc120-mt-s-1_55'
-BF_BOOST_LIB_INTERNATIONAL = ' libboost_locale-vc120-mt-s-1_55'
+if VC_VERSION == '12.0':
+    BF_BOOST_LIB = 'libboost_date_time-vc120-mt-s-1_55 libboost_filesystem-vc120-mt-s-1_55 libboost_regex-vc120-mt-s-1_55 libboost_system-vc120-mt-s-1_55 libboost_thread-vc120-mt-s-1_55 libboost_wave-vc120-mt-s-1_55'
+    BF_BOOST_LIB_INTERNATIONAL = ' libboost_locale-vc120-mt-s-1_55'
+else:
+    BF_BOOST_LIB = 'libboost_date_time-vc90-mt-s-1_49 libboost_filesystem-vc90-mt-s-1_49 libboost_regex-vc90-mt-s-1_49 libboost_system-vc90-mt-s-1_49 libboost_thread-vc90-mt-s-1_49 libboost_wave-vc90-mt-s-1_49'
+    BF_BOOST_LIB_INTERNATIONAL = 'libboost_locale-vc90-mt-s-1_49'
 BF_BOOST_LIBPATH = '${BF_BOOST}/lib'
 
 #CUDA
 WITH_BF_CYCLES_CUDA_BINARIES = False
 #BF_CYCLES_CUDA_NVCC = "" # Path to the nvidia compiler
-BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50', 'sm_52']
+BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50']
 
 #Ray trace optimization
 WITH_BF_RAYOPTIMIZATION = True
@@ -223,24 +231,18 @@ CCFLAGS = ['/nologo', '/J', '/W3', '/Gd', '/w34062', '/wd4018', '/wd4065', '/wd4
 CXXFLAGS = ['/EHsc']
 BGE_CXXFLAGS = ['/O2', '/Ob2', '/EHsc', '/GR', '/fp:fast', '/arch:SSE']
 
-if VC_VERSION == '12.0':
-    CCFLAGS.append('/DOIIO_STATIC_BUILD')  # OIIO api changed with 1.4 making this needed 
-
 BF_DEBUG_CCFLAGS = ['/Zi', '/Ob0', '/Od', '/FR${TARGET}.sbr']
 
 CPPFLAGS = ['-DWIN32','-D_CONSOLE', '-D_LIB', '-D_CRT_SECURE_NO_DEPRECATE', '-DOPJ_STATIC']
 REL_CFLAGS = []
 REL_CXXFLAGS = []
-REL_CCFLAGS = ['-O2', '/Ob2']
+REL_CCFLAGS = ['-O2', '/Ob2', '-DNDEBUG']
 
 C_WARN = []
 CC_WARN = []
 CXX_WARN = []
 
-LLIBS = ['ws2_32', 'vfw32', 'winmm', 'kernel32', 'user32', 'gdi32', 'comdlg32', 'advapi32', 'shfolder', 'shell32', 'ole32', 'oleaut32', 'uuid', 'psapi', 'Dbghelp']
-
-if WITH_BF_IME:
-    LLIBS.append('imm32')
+LLIBS = ['ws2_32', 'vfw32', 'winmm', 'kernel32', 'user32', 'gdi32', 'comdlg32', 'advapi32', 'shfolder', 'shell32', 'ole32', 'oleaut32', 'uuid', 'psapi']
 
 PLATFORM_LINKFLAGS = ['/SUBSYSTEM:CONSOLE','/MACHINE:IX86','/STACK:2097152','/INCREMENTAL:NO', '/LARGEADDRESSAWARE', '/NODEFAULTLIB:msvcrt.lib', '/NODEFAULTLIB:msvcmrt.lib', '/NODEFAULTLIB:msvcurt.lib', '/NODEFAULTLIB:msvcrtd.lib']
 
@@ -251,6 +253,10 @@ PLATFORM_LINKFLAGS = ['/SUBSYSTEM:CONSOLE','/MACHINE:IX86','/STACK:2097152','/IN
 
 BF_BSC=False
 
-BF_CYCLES_CUDA_ENV="C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd"
-BF_BUILDDIR = '..\\build\\win32-vc'
-BF_INSTALLDIR='..\\install\\win32-vc'
+if VC_VERSION == '12.0':
+    BF_CYCLES_CUDA_ENV="C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd"
+    BF_BUILDDIR = '..\\build\\win32-vc'
+    BF_INSTALLDIR='..\\install\\win32-vc'
+else:
+    BF_BUILDDIR = '..\\build\\win32-vc9'
+    BF_INSTALLDIR='..\\install\\win32-vc9'

build_files/scons/config/win64-mingw-config.py

@@ -169,8 +169,6 @@ BF_BOOST_LIBPATH = '${BF_BOOST}/lib'
 WITH_BF_RAYOPTIMIZATION = True
 BF_RAYOPTIMIZATION_SSE_FLAGS = ['-mmmx', '-msse', '-msse2']
 
-WITH_BF_IME = True
-
 WITH_BF_OPENMP = True
 
 #Freestyle
@@ -186,17 +184,13 @@ CXXFLAGS = [ '-fpermissive' ]
 CPPFLAGS = ['-DWIN32', '-DMS_WIN64', '-DFREE_WINDOWS', '-DFREE_WINDOWS64', '-D_LARGEFILE_SOURCE', '-D_FILE_OFFSET_BITS=64', '-D_LARGEFILE64_SOURCE', '-DBOOST_ALL_NO_LIB', '-DBOOST_THREAD_USE_LIB', '-DGLEW_STATIC', '-DOPJ_STATIC']
 REL_CFLAGS = []
 REL_CXXFLAGS = []
-REL_CCFLAGS = ['-O2', '-ftree-vectorize']
+REL_CCFLAGS = ['-DNDEBUG', '-O2', '-ftree-vectorize']
 
-# NOTE: C_WARN seems to get ignored - at least -Wno-char-subscripts doesn't work!
 C_WARN = ['-Wno-char-subscripts', '-Wdeclaration-after-statement', '-Wstrict-prototypes']
 
-CC_WARN = [ '-Wall', '-Wno-char-subscripts' ]
+CC_WARN = [ '-Wall' ]
 
-LLIBS = ['-lshell32', '-lshfolder', '-lgdi32', '-lmsvcrt', '-lwinmm', '-lmingw32', '-lm', '-lws2_32', '-lz', '-lstdc++','-lole32','-luuid', '-lwsock32', '-lpsapi', '-lpthread', '-ldbghelp']
-
-if WITH_BF_IME:
-    LLIBS.append('-limm32')
+LLIBS = ['-lshell32', '-lshfolder', '-lgdi32', '-lmsvcrt', '-lwinmm', '-lmingw32', '-lm', '-lws2_32', '-lz', '-lstdc++','-lole32','-luuid', '-lwsock32', '-lpsapi', '-lpthread']
 
 PLATFORM_LINKFLAGS = ['-Xlinker', '--stack=2097152']
 
@@ -205,7 +199,7 @@ PLATFORM_LINKFLAGS = ['-Xlinker', '--stack=2097152']
 # PLATFORM_LINKFLAGS += ["-static-libgcc", "-static-libstdc++"]
 
 BF_DEBUG = False
-BF_DEBUG_CCFLAGS= ['-g']
+BF_DEBUG_CCFLAGS= ['-g', '-D_DEBUG']
 
 BF_PROFILE_CCFLAGS = ['-pg', '-g']
 BF_PROFILE_LINKFLAGS = ['-pg']

build_files/scons/config/win64-vc-config.py

@@ -6,6 +6,9 @@ CL_STDOUT, CL_STDERR = CL_OUT.communicate()
 if "18.00." in CL_STDERR:
     VC_VERSION = '12.0'
     LCGDIR = '#../lib/win64_vc12'
+elif "15.00." in  CL_STDERR:
+    VC_VERSION = '9.0'
+    LCGDIR = '#../lib/win64'
 else:
     import sys
     print("Visual C version not supported {}\n".format(CL_STDERR))
@@ -34,7 +37,7 @@ WITH_BF_PYTHON_INSTALL_NUMPY = True
 WITH_BF_OPENAL = True
 BF_OPENAL = LIBDIR + '/openal'
 BF_OPENAL_INC = '${BF_OPENAL}/include '
-BF_OPENAL_LIB = 'OpenAL32'
+BF_OPENAL_LIB = 'wrap_oal'
 BF_OPENAL_LIBPATH = '${BF_OPENAL}/lib'
 
 WITH_BF_SNDFILE = True
@@ -52,7 +55,7 @@ BF_ICONV_LIBPATH = '${BF_ICONV}/lib'
 WITH_BF_SDL = True
 BF_SDL = LIBDIR + '/sdl'
 BF_SDL_INC = '${BF_SDL}/include'
-BF_SDL_LIB = 'SDL2.lib'
+BF_SDL_LIB = 'SDL.lib'
 BF_SDL_LIBPATH = '${BF_SDL}/lib'
 
 WITH_BF_JACK = False
@@ -66,7 +69,10 @@ WITH_BF_OPENEXR = True
 WITH_BF_STATICOPENEXR = False
 BF_OPENEXR = LIBDIR + '/openexr'
 BF_OPENEXR_INC = '${BF_OPENEXR}/include ${BF_OPENEXR}/include/OpenEXR '
-BF_OPENEXR_LIB = ' Iex-2_2 Half IlmImf-2_2 Imath-2_2 IlmThread-2_2 '
+if VC_VERSION == '12.0':
+    BF_OPENEXR_LIB = ' Iex-2_1 Half IlmImf-2_1 Imath-2_1 IlmThread-2_1 '
+else:
+    BF_OPENEXR_LIB = ' Iex Half IlmImf Imath IlmThread '
 BF_OPENEXR_LIBPATH = '${BF_OPENEXR}/lib'
 BF_OPENEXR_LIB_STATIC = '${BF_OPENEXR}/lib/libHalf.a ${BF_OPENEXR}/lib/libIlmImf.a ${BF_OPENEXR}/lib/libIex.a ${BF_OPENEXR}/lib/libImath.a ${BF_OPENEXR}/lib/libIlmThread.a'
 
@@ -151,11 +157,9 @@ BF_COLLADA_LIB = 'bf_collada'
 
 BF_OPENCOLLADA = LIBDIR + '/opencollada'
 BF_OPENCOLLADA_INC = '${BF_OPENCOLLADA}/include/opencollada'
-BF_OPENCOLLADA_LIB = 'OpenCOLLADAStreamWriter OpenCOLLADASaxFrameworkLoader OpenCOLLADAFramework OpenCOLLADABaseUtils GeneratedSaxParser MathMLSolver xml pcre buffer ftoa'
+BF_OPENCOLLADA_LIB = 'OpenCOLLADAStreamWriter OpenCOLLADASaxFrameworkLoader OpenCOLLADAFramework OpenCOLLADABaseUtils GeneratedSaxParser MathMLSolver xml pcre buffer ftoa UTF'
 BF_OPENCOLLADA_LIBPATH = '${BF_OPENCOLLADA}/lib/opencollada'
 
-WITH_BF_IME = True
-
 WITH_BF_3DMOUSE = True
 
 WITH_BF_OPENMP = True
@@ -182,7 +186,7 @@ WITH_BF_OIIO = True
 BF_OIIO = '${LIBDIR}/openimageio'
 BF_OIIO_INC = '${BF_OIIO}/include'
 BF_OIIO_LIBPATH = '${BF_OIIO}/lib'
-BF_OIIO_LIB_STATIC = '${BF_OIIO_LIBPATH}/OpenImageIO.lib ${BF_OIIO_LIBPATH}/OpenImageIO_Util.lib'
+BF_OIIO_LIB_STATIC = '${BF_OIIO_LIBPATH}/OpenImageIO.lib'
 WITH_BF_STATICOIIO = True
 
 WITH_BF_OCIO = True
@@ -195,14 +199,18 @@ WITH_BF_STATICOCIO = True
 WITH_BF_BOOST = True
 BF_BOOST = '${LIBDIR}/boost'
 BF_BOOST_INC = '${BF_BOOST}/include'
-BF_BOOST_LIB = 'libboost_date_time-vc120-mt-s-1_55 libboost_filesystem-vc120-mt-s-1_55 libboost_regex-vc120-mt-s-1_55 libboost_system-vc120-mt-s-1_55 libboost_thread-vc120-mt-s-1_55 libboost_wave-vc120-mt-s-1_55'
-BF_BOOST_LIB_INTERNATIONAL = ' libboost_locale-vc120-mt-s-1_55'
+if VC_VERSION == '12.0':
+    BF_BOOST_LIB = 'libboost_date_time-vc120-mt-s-1_55 libboost_filesystem-vc120-mt-s-1_55 libboost_regex-vc120-mt-s-1_55 libboost_system-vc120-mt-s-1_55 libboost_thread-vc120-mt-s-1_55 libboost_wave-vc120-mt-s-1_55'
+    BF_BOOST_LIB_INTERNATIONAL = ' libboost_locale-vc120-mt-s-1_55'
+else:
+    BF_BOOST_LIB = 'libboost_date_time-vc90-mt-s-1_49 libboost_filesystem-vc90-mt-s-1_49 libboost_regex-vc90-mt-s-1_49 libboost_system-vc90-mt-s-1_49 libboost_thread-vc90-mt-s-1_49 libboost_wave-vc90-mt-s-1_49'
+    BF_BOOST_LIB_INTERNATIONAL = ' libboost_locale-vc90-mt-s-1_49'
 BF_BOOST_LIBPATH = '${BF_BOOST}/lib'
 
 #CUDA
 WITH_BF_CYCLES_CUDA_BINARIES = False
 #BF_CYCLES_CUDA_NVCC = "" # Path to the nvidia compiler
-BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50', 'sm_52']
+BF_CYCLES_CUDA_BINARIES_ARCH = ['sm_20', 'sm_21', 'sm_30', 'sm_35', 'sm_50']
 
 #Ray trace optimization
 WITH_BF_RAYOPTIMIZATION = True
@@ -228,7 +236,6 @@ CCFLAGS = ['/nologo', '/J', '/W3', '/Gd', '/w34062', '/wd4018', '/wd4065', '/wd4
 # We want to support Vista level ABI for x64
 if VC_VERSION == '12.0':
     CCFLAGS.append('/D_WIN32_WINNT=0x600')
-    CCFLAGS.append('/DOIIO_STATIC_BUILD')  # OIIO api changed with 1.4 making this needed 
 
 CXXFLAGS = ['/EHsc']
 BGE_CXXFLAGS = ['/O2', '/Ob2', '/EHsc', '/GR', '/fp:fast']
@@ -238,19 +245,19 @@ BF_DEBUG_CCFLAGS = ['/Zi', '/FR${TARGET}.sbr', '/Od', '/Ob0']
 CPPFLAGS = ['-DWIN32', '-D_CONSOLE', '-D_LIB', '-D_CRT_SECURE_NO_DEPRECATE', '-DOPJ_STATIC']
 REL_CFLAGS = []
 REL_CXXFLAGS = []
-REL_CCFLAGS = ['-O2', '/Ob2']
+REL_CCFLAGS = ['-O2', '/Ob2', '-DNDEBUG']
 
 C_WARN = []
 CC_WARN = []
 CXX_WARN = []
 
-LLIBS = ['ws2_32', 'vfw32', 'winmm', 'kernel32', 'user32', 'gdi32', 'comdlg32', 'advapi32', 'shfolder', 'shell32', 'ole32', 'oleaut32', 'uuid', 'psapi', 'Dbghelp']
-
-if WITH_BF_IME:
-    LLIBS.append('imm32')
+LLIBS = ['ws2_32', 'vfw32', 'winmm', 'kernel32', 'user32', 'gdi32', 'comdlg32', 'advapi32', 'shfolder', 'shell32', 'ole32', 'oleaut32', 'uuid', 'psapi']
 
 PLATFORM_LINKFLAGS = ['/SUBSYSTEM:CONSOLE','/MACHINE:X64','/STACK:2097152','/OPT:NOREF','/INCREMENTAL:NO', '/NODEFAULTLIB:msvcrt.lib', '/NODEFAULTLIB:msvcmrt.lib', '/NODEFAULTLIB:msvcurt.lib', '/NODEFAULTLIB:msvcrtd.lib']
-
-BF_CYCLES_CUDA_ENV="C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd"
-BF_BUILDDIR = '..\\build\\win64-vc'
-BF_INSTALLDIR='..\\install\\win64-vc'
+if VC_VERSION == '12.0':
+    BF_CYCLES_CUDA_ENV="C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd"
+    BF_BUILDDIR = '..\\build\\win64-vc'
+    BF_INSTALLDIR='..\\install\\win64-vc'
+else:
+    BF_BUILDDIR = '..\\build\\win64-vc9'
+    BF_INSTALLDIR='..\\install\\win64-vc9'

build_files/scons/tools/Blender.py

@@ -143,7 +143,7 @@ def setup_staticlibs(lenv):
     libincs += Split(lenv['BF_FREETYPE_LIBPATH'])
     if lenv['WITH_BF_PYTHON']:
         libincs += Split(lenv['BF_PYTHON_LIBPATH'])
-    if lenv['WITH_BF_SDL'] and not lenv['WITH_BF_SDL_DYNLOAD']:
+    if lenv['WITH_BF_SDL']:
         libincs += Split(lenv['BF_SDL_LIBPATH'])
     if lenv['WITH_BF_JACK'] and not lenv['WITH_BF_JACK_DYNLOAD']:
         libincs += Split(lenv['BF_JACK_LIBPATH'])
@@ -204,20 +204,10 @@ def setup_staticlibs(lenv):
         libincs += Split(lenv['BF_OIIO_LIBPATH'])
         if lenv['WITH_BF_STATICOIIO']:
             statlibs += Split(lenv['BF_OIIO_LIB_STATIC'])
-
-    if lenv['WITH_BF_HDF5']:
-        libincs += Split(lenv['BF_HDF5_LIBPATH'])
-
-    if lenv['WITH_BF_ALEMBIC']:
-        libincs += Split(lenv['BF_ALEMBIC_LIBPATH'])
-        if lenv['WITH_BF_STATICALEMBIC']:
-            statlibs += Split(lenv['BF_ALEMBIC_LIB_STATIC'])
-
     if lenv['WITH_BF_OPENEXR']:
         libincs += Split(lenv['BF_OPENEXR_LIBPATH'])
         if lenv['WITH_BF_STATICOPENEXR']:
             statlibs += Split(lenv['BF_OPENEXR_LIB_STATIC'])
-
     if lenv['WITH_BF_ZLIB'] and lenv['WITH_BF_STATICZLIB']:
         statlibs += Split(lenv['BF_ZLIB_LIB_STATIC'])
 
@@ -226,16 +216,16 @@ def setup_staticlibs(lenv):
         if lenv['WITH_BF_STATICOCIO']:
             statlibs += Split(lenv['BF_OCIO_LIB_STATIC'])
 
-    if lenv['WITH_BF_CYCLES_OSL']:
-        libincs += Split(lenv['BF_OSL_LIBPATH'])
-        if lenv['WITH_BF_STATICOSL']:
-            statlibs += Split(lenv['BF_OSL_LIB_STATIC'])
-
     if lenv['WITH_BF_BOOST']:
         libincs += Split(lenv['BF_BOOST_LIBPATH'])
         if lenv['WITH_BF_STATICBOOST']:
             statlibs += Split(lenv['BF_BOOST_LIB_STATIC'])
 
+    if lenv['WITH_BF_CYCLES_OSL']:
+        libincs += Split(lenv['BF_OSL_LIBPATH'])
+        if lenv['WITH_BF_STATICOSL']:
+            statlibs += Split(lenv['BF_OSL_LIB_STATIC'])
+
     if lenv['WITH_BF_LLVM']:
         libincs += Split(lenv['BF_LLVM_LIBPATH'])
         if lenv['WITH_BF_STATICLLVM']:
@@ -258,11 +248,6 @@ def setup_staticlibs(lenv):
         libincs = [e for e in libincs if SCons.Subst.scons_subst(e, lenv, gvars=lenv.Dictionary()) != "/usr/lib"]
         libincs.append('/usr/lib')
 
-    # Hack to pass OSD libraries to linker before extern_{clew,cuew}
-    # Here we only store library path, actual library name will be added in setup_syslibs()
-    for syslib in create_blender_liblist(lenv, 'system'):
-        libincs.append(os.path.dirname(syslib))
-
     return statlibs, libincs
 
 def setup_syslibs(lenv):
@@ -293,16 +278,8 @@ def setup_syslibs(lenv):
         if not lenv['WITH_BF_STATICOCIO']:
             syslibs += Split(lenv['BF_OCIO_LIB'])
 
-    if lenv['WITH_BF_HDF5']:
-        syslibs += Split(lenv['BF_HDF5_LIB'])
-
-    if lenv['WITH_BF_ALEMBIC']:
-        if not lenv['WITH_BF_STATICALEMBIC']:
-            syslibs += Split(lenv['BF_ALEMBIC_LIB'])
-
     if lenv['WITH_BF_OPENEXR'] and not lenv['WITH_BF_STATICOPENEXR']:
         syslibs += Split(lenv['BF_OPENEXR_LIB'])
-
     if lenv['WITH_BF_ZLIB'] and not lenv['WITH_BF_STATICZLIB']:
         syslibs += Split(lenv['BF_ZLIB_LIB'])
     if lenv['WITH_BF_TIFF'] and not lenv['WITH_BF_STATICTIFF']:
@@ -321,7 +298,7 @@ def setup_syslibs(lenv):
     if lenv['WITH_BF_ELTOPO']:
         syslibs += Split(lenv['BF_LAPACK_LIB'])
     '''
-    if lenv['WITH_BF_SDL'] and not lenv['WITH_BF_SDL_DYNLOAD']:
+    if lenv['WITH_BF_SDL']:
         syslibs += Split(lenv['BF_SDL_LIB'])
     if not lenv['WITH_BF_STATICOPENGL']:
         syslibs += Split(lenv['BF_OPENGL_LIB'])
@@ -343,16 +320,16 @@ def setup_syslibs(lenv):
         if lenv['WITH_BF_3DMOUSE']:
             if not lenv['WITH_BF_STATIC3DMOUSE']:
                 syslibs += Split(lenv['BF_3DMOUSE_LIB'])
+                
+    if lenv['WITH_BF_BOOST'] and not lenv['WITH_BF_STATICBOOST']:
+        syslibs += Split(lenv['BF_BOOST_LIB'])
+        
+        if lenv['WITH_BF_INTERNATIONAL']:
+            syslibs += Split(lenv['BF_BOOST_LIB_INTERNATIONAL'])
 
     if lenv['WITH_BF_CYCLES_OSL'] and not lenv['WITH_BF_STATICOSL']:
         syslibs += Split(lenv['BF_OSL_LIB'])
 
-    if lenv['WITH_BF_BOOST'] and not lenv['WITH_BF_STATICBOOST']:
-        syslibs += Split(lenv['BF_BOOST_LIB'])
-
-        if lenv['WITH_BF_INTERNATIONAL']:
-            syslibs += Split(lenv['BF_BOOST_LIB_INTERNATIONAL'])
-
     if lenv['WITH_BF_LLVM'] and not lenv['WITH_BF_STATICLLVM']:
         syslibs += Split(lenv['BF_LLVM_LIB'])
 
@@ -362,10 +339,6 @@ def setup_syslibs(lenv):
     if not lenv['WITH_BF_STATICPNG']:
         syslibs += Split(lenv['BF_PNG_LIB'])
 
-    # Hack to pass OSD libraries to linker before extern_{clew,cuew}
-    for syslib in create_blender_liblist(lenv, 'system'):
-        syslibs.append(os.path.basename(syslib))
-
     syslibs += lenv['LLIBS']
 
     return syslibs
@@ -390,23 +363,7 @@ def propose_priorities():
 def creator(env):
     sources = ['creator.c']# + Blender.buildinfo(env, "dynamic") + Blender.resources
 
-    incs = ['#/intern/guardedalloc',
-            '#/source/blender/blenlib',
-            '#/source/blender/blenkernel',
-            '#/source/blender/depsgraph',
-            '#/source/blender/editors/include',
-            '#/source/blender/blenloader',
-            '#/source/blender/imbuf',
-            '#/source/blender/renderconverter',
-            '#/source/blender/render/extern/include',
-            '#/source/blender/windowmanager',
-            '#/source/blender/makesdna',
-            '#/source/blender/makesrna',
-            '#/source/blender/pointcache',
-            '#/source/gameengine/BlenderRoutines',
-            '#/extern/glew/include',
-            '#/source/blender/gpu',
-            env['BF_OPENGL_INC']]
+    incs = ['#/intern/guardedalloc', '#/source/blender/blenlib', '#/source/blender/blenkernel', '#/source/blender/editors/include', '#/source/blender/blenloader', '#/source/blender/imbuf', '#/source/blender/renderconverter', '#/source/blender/render/extern/include', '#/source/blender/windowmanager', '#/source/blender/makesdna', '#/source/blender/makesrna', '#/source/gameengine/BlenderRoutines', '#/extern/glew/include', '#/source/blender/gpu', env['BF_OPENGL_INC']]
 
     defs = []
 
@@ -415,19 +372,12 @@ def creator(env):
         defs.append('WITH_BINRELOC')
 
     if env['WITH_BF_SDL']:
-        if env['WITH_BF_SDL_DYNLOAD']:
-            defs.append('WITH_SDL_DYNLOAD')
-            incs.append('#/extern/sdlew/include')
         defs.append('WITH_SDL')
 
     if env['WITH_BF_LIBMV']:
         incs.append('#/extern/libmv')
         defs.append('WITH_LIBMV')
 
-    if env['WITH_BF_CYCLES'] and env['WITH_BF_CYCLES_LOGGING']:
-        incs.append('#/intern/cycles/blender')
-        defs.append('WITH_CYCLES_LOGGING')
-
     if env['WITH_BF_FFMPEG']:
         defs.append('WITH_FFMPEG')
 
@@ -475,7 +425,7 @@ def buildinfo(lenv, build_type):
             no_upstream = False
 
             try :
-                build_hash = btools.get_command_output(['git', 'rev-parse', '--short', '@{u}'], stderr=subprocess.STDOUT).strip()
+                build_hash = btools.get_command_output(['git', 'rev-parse', '--short', '@{u}']).strip()
             except subprocess.CalledProcessError:
                 # assume branch has no upstream configured
                 build_hash = btools.get_command_output(['git', 'rev-parse', '--short', 'HEAD']).strip()
@@ -664,7 +614,7 @@ def WinPyBundle(target=None, source=None, env=None):
         py_tar+= '/release/python' + env['BF_PYTHON_VERSION'].replace('.','') + '.tar.gz'
 
     py_target = env.subst(env['BF_INSTALLDIR']).lstrip("#")
-    py_target = os.path.join(py_target, VERSION, 'python')
+    py_target = os.path.join(py_target, VERSION, 'python', 'lib')
     def printexception(func,path,ex):
         if os.path.exists(path): #do not report if path does not exist. eg on a fresh build.
             print str(func) + ' failed on ' + str(path)
@@ -688,7 +638,7 @@ def WinPyBundle(target=None, source=None, env=None):
     # Extract Numpy
     if env['WITH_BF_PYTHON_INSTALL_NUMPY']:
         py_tar = env.subst(env['LCGDIR']).lstrip("#")
-        py_tar += '/release/python' + env['BF_PYTHON_VERSION'].replace('.','') + '_numpy_1.9.tar.gz'
+        py_tar += '/release/python' + env['BF_PYTHON_VERSION'].replace('.','') + '_numpy_1.8.tar.gz'
 
         py_target = env.subst(env['BF_INSTALLDIR']).lstrip("#")
         py_target = os.path.join(py_target, VERSION, 'python', 'lib', 'site-packages')
@@ -704,8 +654,6 @@ def WinPyBundle(target=None, source=None, env=None):
     py_dir += '/release/site-packages'
     # grr, we have to do one by one because the dir exists
     for f in os.listdir(py_dir):
-        if f == '.svn':
-            continue
         fn_src = os.path.join(py_dir, f)
         fn_dst = os.path.join(py_target, f)
 
@@ -754,37 +702,37 @@ def AppIt(target=None, source=None, env=None):
     commands.getoutput(cmd)
     cmd = 'cp %s/%s %s/%s.app/Contents/MacOS/%s'%(builddir, binary,installdir, binary, binary)
     commands.getoutput(cmd)
-    cmd = 'mkdir %s/%s.app/Contents/Resources/%s/'%(installdir, binary, VERSION)
+    cmd = 'mkdir %s/%s.app/Contents/MacOS/%s/'%(installdir, binary, VERSION)
     commands.getoutput(cmd)
     cmd = installdir + '/%s.app/Contents/MacOS/%s'%(binary,VERSION)
 
     # blenderplayer doesn't need all the files
     if binary == 'blender':
-        cmd = 'mkdir %s/%s.app/Contents/Resources/%s/datafiles'%(installdir, binary, VERSION)
+        cmd = 'mkdir %s/%s.app/Contents/MacOS/%s/datafiles'%(installdir, binary, VERSION)
         commands.getoutput(cmd)
-        cmd = 'cp -R %s/release/datafiles/fonts %s/%s.app/Contents/Resources/%s/datafiles/'%(bldroot,installdir,binary,VERSION)
+        cmd = 'cp -R %s/release/datafiles/fonts %s/%s.app/Contents/MacOS/%s/datafiles/'%(bldroot,installdir,binary,VERSION)
         commands.getoutput(cmd)
         mo_dir = os.path.join(builddir[:-4], "locale")
         for f in os.listdir(mo_dir):
-            cmd = 'ditto %s/%s %s/%s.app/Contents/Resources/%s/datafiles/locale/%s/LC_MESSAGES/blender.mo'%(mo_dir, f, installdir, binary, VERSION, f[:-3])
+            cmd = 'ditto %s/%s %s/%s.app/Contents/MacOS/%s/datafiles/locale/%s/LC_MESSAGES/blender.mo'%(mo_dir, f, installdir, binary, VERSION, f[:-3])
             commands.getoutput(cmd)
-        cmd = 'cp %s/release/datafiles/locale/languages %s/%s.app/Contents/Resources/%s/datafiles/locale/'%(bldroot, installdir, binary, VERSION)
+        cmd = 'cp %s/release/datafiles/locale/languages %s/%s.app/Contents/MacOS/%s/datafiles/locale/'%(bldroot, installdir, binary, VERSION)
         commands.getoutput(cmd)
 
         if env['WITH_BF_OCIO']:
-            cmd = 'cp -R %s/release/datafiles/colormanagement %s/%s.app/Contents/Resources/%s/datafiles/'%(bldroot,installdir,binary,VERSION)
+            cmd = 'cp -R %s/release/datafiles/colormanagement %s/%s.app/Contents/MacOS/%s/datafiles/'%(bldroot,installdir,binary,VERSION)
             commands.getoutput(cmd)
         
-        cmd = 'cp -R %s/release/scripts %s/%s.app/Contents/Resources/%s/'%(bldroot,installdir,binary,VERSION)
+        cmd = 'cp -R %s/release/scripts %s/%s.app/Contents/MacOS/%s/'%(bldroot,installdir,binary,VERSION)
         commands.getoutput(cmd)
 
         if VERSION_RELEASE_CYCLE == "release":
-            cmd = 'rm -rf %s/%s.app/Contents/Resources/%s/scripts/addons_contrib'%(installdir,binary,VERSION)
+            cmd = 'rm -rf %s/%s.app/Contents/MacOS/%s/scripts/addons_contrib'%(installdir,binary,VERSION)
             commands.getoutput(cmd)
 
         if env['WITH_BF_CYCLES']:
             croot = '%s/intern/cycles' % (bldroot)
-            cinstalldir = '%s/%s.app/Contents/Resources/%s/scripts/addons/cycles' % (installdir,binary,VERSION)
+            cinstalldir = '%s/%s.app/Contents/MacOS/%s/scripts/addons/cycles' % (installdir,binary,VERSION)
 
             cmd = 'mkdir %s' % (cinstalldir)
             commands.getoutput(cmd)
@@ -798,7 +746,7 @@ def AppIt(target=None, source=None, env=None):
             commands.getoutput(cmd)
             cmd = 'cp -R %s/kernel/*.h %s/kernel/*.cl %s/kernel/*.cu %s/kernel/' % (croot, croot, croot, cinstalldir)
             commands.getoutput(cmd)
-            cmd = 'cp -R %s/kernel/svm %s/kernel/closure %s/kernel/geom %s/util/util_color.h %s/util/util_half.h %s/util/util_math.h %s/util/util_math_fast.h %s/util/util_transform.h %s/util/util_types.h %s/kernel/' % (croot, croot, croot, croot, croot, croot, croot, croot, croot, cinstalldir)
+            cmd = 'cp -R %s/kernel/svm %s/kernel/closure %s/kernel/geom %s/util/util_color.h %s/util/util_half.h %s/util/util_math.h %s/util/util_transform.h %s/util/util_types.h %s/kernel/' % (croot, croot, croot, croot, croot, croot, croot, croot, cinstalldir)
             commands.getoutput(cmd)
             cmd = 'cp -R %s/../intern/cycles/kernel/*.cubin %s/lib/' % (builddir, cinstalldir)
             commands.getoutput(cmd)
@@ -812,11 +760,11 @@ def AppIt(target=None, source=None, env=None):
                 commands.getoutput(cmd)
 
     if env['WITH_OSX_STATICPYTHON']:
-        cmd = 'mkdir %s/%s.app/Contents/Resources/%s/python/'%(installdir,binary, VERSION)
+        cmd = 'mkdir %s/%s.app/Contents/MacOS/%s/python/'%(installdir,binary, VERSION)
         commands.getoutput(cmd)
-        cmd = 'unzip -q %s/release/%s -d %s/%s.app/Contents/Resources/%s/python/'%(libdir,python_zip,installdir,binary,VERSION)
+        cmd = 'unzip -q %s/release/%s -d %s/%s.app/Contents/MacOS/%s/python/'%(libdir,python_zip,installdir,binary,VERSION)
         commands.getoutput(cmd)
-        cmd = 'cp -R %s/release/site-packages/ %s/%s.app/Contents/Resources/%s/python/lib/python%s/site-packages/'%(libdir,installdir,binary,VERSION,env['BF_PYTHON_VERSION'])
+        cmd = 'cp -R %s/release/site-packages/ %s/%s.app/Contents/MacOS/%s/python/lib/python%s/site-packages/'%(libdir,installdir,binary,VERSION,env['BF_PYTHON_VERSION'])
         commands.getoutput(cmd)
 
     cmd = 'chmod +x  %s/%s.app/Contents/MacOS/%s'%(installdir,binary, binary)
@@ -833,26 +781,28 @@ def AppIt(target=None, source=None, env=None):
         if env['C_COMPILER_ID'] == 'gcc' and env['CCVERSION'] >= '4.6.1': # for correct errorhandling with gcc >= 4.6.1 we need the gcc.dylib and gomp.dylib to link, thus distribute in app-bundle
             print "Bundling libgcc and libgomp"
             instname = env['BF_CXX']
-            cmd = 'ditto --arch %s %s/lib/libgcc_s.1.dylib %s/%s.app/Contents/Resources/lib/'%(osxarch, instname, installdir, binary) # copy libgcc
+            cmd = 'ditto --arch %s %s/lib/libgcc_s.1.dylib %s/%s.app/Contents/MacOS/lib/'%(osxarch, instname, installdir, binary) # copy libgcc
             commands.getoutput(cmd)
-            cmd = 'install_name_tool -id @executable_path/../Resources/lib/libgcc_s.1.dylib %s/%s.app/Contents/Resources/lib/libgcc_s.1.dylib'%(installdir, binary) # change id of libgcc
+            cmd = 'install_name_tool -id @executable_path/lib/libgcc_s.1.dylib %s/%s.app/Contents/MacOS/lib/libgcc_s.1.dylib'%(installdir, binary) # change id of libgcc
             commands.getoutput(cmd)
-            cmd = 'ditto --arch %s %s/lib/libgomp.1.dylib %s/%s.app/Contents/Resources/lib/'%(osxarch, instname, installdir, binary) # copy libgomp
+            cmd = 'ditto --arch %s %s/lib/libgomp.1.dylib %s/%s.app/Contents/MacOS/lib/'%(osxarch, instname, installdir, binary) # copy libgomp
             commands.getoutput(cmd)
-            cmd = 'install_name_tool -id @executable_path/../Resources/lib/libgomp.1.dylib %s/%s.app/Contents/Resources/lib/libgomp.1.dylib'%(installdir, binary) # change id of libgomp
+            cmd = 'install_name_tool -id @executable_path/lib/libgomp.1.dylib %s/%s.app/Contents/MacOS/lib/libgomp.1.dylib'%(installdir, binary) # change id of libgomp
             commands.getoutput(cmd)
-            cmd = 'install_name_tool -change %s/lib/libgcc_s.1.dylib  @executable_path/../Resources/lib/libgcc_s.1.dylib %s/%s.app/Contents/Resources/lib/libgomp.1.dylib'%(instname, installdir, binary) # change ref to libgcc
+            cmd = 'install_name_tool -change %s/lib/libgcc_s.1.dylib  @executable_path/lib/libgcc_s.1.dylib %s/%s.app/Contents/MacOS/lib/libgomp.1.dylib'%(instname, installdir, binary) # change ref to libgcc
             commands.getoutput(cmd)
-            cmd = 'install_name_tool -change %s/lib/libgcc_s.1.dylib  @executable_path/../Resources/lib/libgcc_s.1.dylib %s/%s.app/Contents/MacOS/%s'%(instname, installdir, binary, binary) # change ref to libgcc ( blender )
+            cmd = 'install_name_tool -change %s/lib/libgcc_s.1.dylib  @executable_path/lib/libgcc_s.1.dylib %s/%s.app/Contents/MacOS/%s'%(instname, installdir, binary, binary) # change ref to libgcc ( blender )
             commands.getoutput(cmd)
-            cmd = 'install_name_tool -change %s/lib/libgomp.1.dylib  @executable_path/../Resources/lib/libgomp.1.dylib %s/%s.app/Contents/MacOS/%s'%(instname, installdir, binary, binary) # change ref to libgomp ( blender )
+            cmd = 'install_name_tool -change %s/lib/libgomp.1.dylib  @executable_path/lib/libgomp.1.dylib %s/%s.app/Contents/MacOS/%s'%(instname, installdir, binary, binary) # change ref to libgomp ( blender )
             commands.getoutput(cmd)
         if env['C_COMPILER_ID'] == 'clang' and env['CCVERSION'] >= '3.4':
             print "Bundling libiomp5"
             instname = env['LCGDIR'][1:] # made libiomp5 part of blender libs
-            cmd = 'ditto --arch %s %s/openmp/lib/libiomp5.dylib %s/%s.app/Contents/Resources/lib/'%(osxarch, instname, installdir, binary) # copy libiomp5
+            cmd = 'ditto --arch %s %s/openmp/lib/libiomp5.dylib %s/%s.app/Contents/MacOS/lib/'%(osxarch, instname, installdir, binary) # copy libiomp5
             commands.getoutput(cmd)
-            cmd = 'cp %s/openmp/LICENSE.txt %s/LICENSE-libiomp5.txt'%(instname, installdir) # copy libiomp5 license
+            cmd = 'install_name_tool -id @loader_path/lib/libiomp5.dylib %s/%s.app/Contents/MacOS/lib/libiomp5.dylib'%(installdir, binary) # change id of libiomp5
+            commands.getoutput(cmd)
+            cmd = 'install_name_tool -change @loader_path/libiomp5.dylib  @loader_path/lib/libiomp5.dylib %s/%s.app/Contents/MacOS/%s'%(installdir, binary, binary) # change ref to libiomp5 ( blender )
             commands.getoutput(cmd)
 
 # extract copy system python, be sure to update other build systems
@@ -877,7 +827,6 @@ def UnixPyBundle(target=None, source=None, env=None):
 
     py_src =    env.subst( env['BF_PYTHON_LIBPATH'] + '/python'+env['BF_PYTHON_VERSION'] )
     py_target =    env.subst( dir + '/python/' + target_lib + '/python'+env['BF_PYTHON_VERSION'] )
-    py_target_bin = env.subst(dir + '/python/bin')
     
     # This is a bit weak, but dont install if its been installed before, makes rebuilds quite slow.
     if os.path.exists(py_target):
@@ -897,11 +846,6 @@ def UnixPyBundle(target=None, source=None, env=None):
     except:
         pass
 
-    # install the executable
-    run("rm -rf '%s'" % py_target_bin)
-    os.makedirs(py_target_bin)
-    run("cp '%s' '%s'" % (env.subst(env['BF_PYTHON_BINARY']), py_target_bin))
-
     run("cp -R '%s' '%s'" % (py_src, os.path.dirname(py_target)))
     run("rm -rf '%s/distutils'" % py_target)
     run("rm -rf '%s/lib2to3'" % py_target)

build_files/scons/tools/btools.py

@@ -108,7 +108,7 @@ def validate_arguments(args, bc):
     opts_list = [
             'WITH_BF_FREESTYLE', 'WITH_BF_PYTHON', 'WITH_BF_PYTHON_SAFETY', 'WITH_BF_PYTHON_SECURITY', 'BF_PYTHON', 'BF_PYTHON_VERSION', 'BF_PYTHON_INC', 'BF_PYTHON_BINARY', 'BF_PYTHON_LIB', 'BF_PYTHON_LIBPATH', 'BF_PYTHON_LIBPATH_ARCH', 'WITH_BF_STATICPYTHON', 'WITH_OSX_STATICPYTHON', 'BF_PYTHON_LIB_STATIC', 'BF_PYTHON_DLL', 'BF_PYTHON_ABI_FLAGS',
             'WITH_BF_OPENAL', 'BF_OPENAL', 'BF_OPENAL_INC', 'BF_OPENAL_LIB', 'BF_OPENAL_LIBPATH', 'WITH_BF_STATICOPENAL', 'BF_OPENAL_LIB_STATIC',
-            'WITH_BF_SDL', 'BF_SDL', 'BF_SDL_INC', 'BF_SDL_LIB', 'BF_SDL_LIBPATH', 'WITH_BF_SDL_DYNLOAD',
+            'WITH_BF_SDL', 'BF_SDL', 'BF_SDL_INC', 'BF_SDL_LIB', 'BF_SDL_LIBPATH',
             'WITH_BF_JACK', 'BF_JACK', 'BF_JACK_INC', 'BF_JACK_LIB', 'BF_JACK_LIBPATH', 'WITH_BF_JACK_DYNLOAD',
             'WITH_BF_SNDFILE', 'BF_SNDFILE', 'BF_SNDFILE_INC', 'BF_SNDFILE_LIB', 'BF_SNDFILE_LIBPATH', 'WITH_BF_STATICSNDFILE', 'BF_SNDFILE_LIB_STATIC',
             'BF_PTHREADS', 'BF_PTHREADS_INC', 'BF_PTHREADS_LIB', 'BF_PTHREADS_LIBPATH',
@@ -136,9 +136,6 @@ def validate_arguments(args, bc):
             'WITH_BF_QUICKTIME', 'BF_QUICKTIME', 'BF_QUICKTIME_INC', 'BF_QUICKTIME_LIB', 'BF_QUICKTIME_LIBPATH',
             'WITH_BF_FFTW3', 'BF_FFTW3', 'BF_FFTW3_INC', 'BF_FFTW3_LIB', 'BF_FFTW3_LIBPATH', 'WITH_BF_STATICFFTW3', 'BF_FFTW3_LIB_STATIC',
             'WITH_BF_STATICOPENGL', 'BF_OPENGL', 'BF_OPENGL_INC', 'BF_OPENGL_LIB', 'BF_OPENGL_LIBPATH', 'BF_OPENGL_LIB_STATIC',
-            'WITH_BF_EGL', 'WITH_BF_GLEW_ES', 'BF_GLEW_INC', 'WITH_BF_GL_PROFILE_CORE', 'WITH_BF_GL_PROFILE_COMPAT', 'WITH_BF_GL_PROFILE_ES20',
-            'WITH_BF_GLEW_MX', 'WITH_BF_GL_EGL', 'WITH_BF_GL_ANGLE',
-
             'WITH_BF_COLLADA', 'BF_COLLADA', 'BF_COLLADA_INC', 'BF_COLLADA_LIB', 'BF_OPENCOLLADA', 'BF_OPENCOLLADA_INC', 'BF_OPENCOLLADA_LIB', 'BF_OPENCOLLADA_LIBPATH', 'BF_PCRE', 'BF_PCRE_LIB', 'BF_PCRE_LIBPATH', 'BF_EXPAT', 'BF_EXPAT_LIB', 'BF_EXPAT_LIBPATH',
             'WITH_BF_STATICOPENCOLLADA', 'BF_OPENCOLLADA_LIB_STATIC',
             'WITH_BF_PLAYER',
@@ -174,23 +171,20 @@ def validate_arguments(args, bc):
             'WITH_BF_CXX_GUARDEDALLOC',
             'WITH_BF_JEMALLOC', 'WITH_BF_STATICJEMALLOC', 'BF_JEMALLOC', 'BF_JEMALLOC_INC', 'BF_JEMALLOC_LIBPATH', 'BF_JEMALLOC_LIB', 'BF_JEMALLOC_LIB_STATIC',
             'BUILDBOT_BRANCH',
-            'WITH_BF_IME',
             'WITH_BF_3DMOUSE', 'WITH_BF_STATIC3DMOUSE', 'BF_3DMOUSE', 'BF_3DMOUSE_INC', 'BF_3DMOUSE_LIB', 'BF_3DMOUSE_LIBPATH', 'BF_3DMOUSE_LIB_STATIC',
             'WITH_BF_CYCLES', 'WITH_BF_CYCLES_CUDA_BINARIES', 'BF_CYCLES_CUDA_NVCC', 'BF_CYCLES_CUDA_NVCC', 'WITH_BF_CYCLES_CUDA_THREADED_COMPILE', 'BF_CYCLES_CUDA_ENV',
             'WITH_BF_OIIO', 'WITH_BF_STATICOIIO', 'BF_OIIO', 'BF_OIIO_INC', 'BF_OIIO_LIB', 'BF_OIIO_LIB_STATIC', 'BF_OIIO_LIBPATH',
             'WITH_BF_OCIO', 'WITH_BF_STATICOCIO', 'BF_OCIO', 'BF_OCIO_INC', 'BF_OCIO_LIB', 'BF_OCIO_LIB_STATIC', 'BF_OCIO_LIBPATH',
             'WITH_BF_BOOST', 'WITH_BF_STATICBOOST', 'BF_BOOST', 'BF_BOOST_INC', 'BF_BOOST_LIB', 'BF_BOOST_LIB_INTERNATIONAL', 'BF_BOOST_LIB_STATIC', 'BF_BOOST_LIBPATH',
-            'WITH_BF_LIBMV', 'WITH_BF_LIBMV_SCHUR_SPECIALIZATIONS',
+            'WITH_BF_LIBMV',
             'WITH_BF_CYCLES_OSL', 'WITH_BF_STATICOSL', 'BF_OSL', 'BF_OSL_INC', 'BF_OSL_LIB', 'BF_OSL_LIBPATH', 'BF_OSL_LIB_STATIC', 'BF_OSL_COMPILER',
-            'WITH_BF_LLVM', 'WITH_BF_STATICLLVM', 'BF_LLVM', 'BF_LLVM_LIB', 'BF_LLVM_LIBPATH', 'BF_LLVM_LIB_STATIC', 'BF_PROGRAM_LINKFLAGS',
-            'WITH_BF_ALEMBIC', 'BF_ALEMBIC', 'BF_ALEMBIC_INC', 'BF_ALEMBIC_LIB', 'BF_ALEMBIC_LIBPATH',
+            'WITH_BF_LLVM', 'WITH_BF_STATICLLVM', 'BF_LLVM', 'BF_LLVM_LIB', 'BF_LLVM_LIBPATH', 'BF_LLVM_LIB_STATIC', 'BF_PROGRAM_LINKFLAGS'
             ]
 
     # Have options here that scons expects to be lists
     opts_list_split = [
             'BF_PYTHON_LINKFLAGS',
             'BF_OPENGL_LINKFLAGS',
-            'BF_GL_DEFINITIONS',
             'CFLAGS', 'CCFLAGS', 'CXXFLAGS', 'CPPFLAGS',
             'REL_CFLAGS', 'REL_CCFLAGS', 'REL_CXXFLAGS',
             'BGE_CXXFLAGS',
@@ -198,9 +192,7 @@ def validate_arguments(args, bc):
             'BF_DEBUG_CFLAGS', 'BF_DEBUG_CCFLAGS', 'BF_DEBUG_CXXFLAGS',
             'C_WARN', 'CC_WARN', 'CXX_WARN',
             'LLIBS', 'PLATFORM_LINKFLAGS', 'MACOSX_ARCHITECTURE', 'MACOSX_SDK', 'XCODE_CUR_VER', 'C_COMPILER_ID',
-            'BF_CYCLES_CUDA_BINARIES_ARCH', 'BF_PROGRAM_LINKFLAGS', 'MACOSX_DEPLOYMENT_TARGET',
-            'WITH_BF_CYCLES_DEBUG', 'WITH_BF_CYCLES_LOGGING',
-            'WITH_BF_CPP11', 'WITH_BF_LEGACY_DEPSGRAPH',
+            'BF_CYCLES_CUDA_BINARIES_ARCH', 'BF_PROGRAM_LINKFLAGS', 'MACOSX_DEPLOYMENT_TARGET'
     ]
 
 
@@ -303,7 +295,6 @@ def read_opts(env, cfg, args):
         ('BF_SDL_INC', 'SDL include path', ''),
         ('BF_SDL_LIB', 'SDL library', ''),
         ('BF_SDL_LIBPATH', 'SDL library path', ''),
-        (BoolVariable('WITH_BF_SDL_DYNLOAD', 'Enable runtime dynamic SDL libraries loading (works only on Linux)', False)),
 
         (BoolVariable('WITH_BF_JACK', 'Enable jack support if true', True)),
         ('BF_JACK', 'jack base path', ''),
@@ -470,18 +461,6 @@ def read_opts(env, cfg, args):
         ('BF_OPENGL_LIB_STATIC', 'OpenGL static libraries', ''),
         ('BF_OPENGL_LINKFLAGS', 'OpenGL link flags', ''),
 
-        (BoolVariable('WITH_BF_GLEW_MX', '', False)),
-        (BoolVariable('WITH_BF_GLEW_ES', '', False)),
-        (BoolVariable('WITH_BF_GL_EGL', '', False)),
-        (BoolVariable('WITH_BF_GL_PROFILE_COMPAT', '', True)),
-        (BoolVariable('WITH_BF_GL_PROFILE_CORE', '', False)),
-        (BoolVariable('WITH_BF_GL_PROFILE_ES20', '', False)),
-        (BoolVariable('WITH_BF_GL_ANGLE', '', False)),
-        ('BF_GL_DEFINITIONS', '', []),
-        ('BF_GLEW_INC', '', ''),
-    ) # end of opts.AddVariables()
-
-    localopts.AddVariables(
         (BoolVariable('WITH_BF_COLLADA', 'Build COLLADA import/export module if true', False)),
         (BoolVariable('WITH_BF_STATICOPENCOLLADA', 'Staticly link to OpenCollada', False)),
         ('BF_COLLADA', 'COLLADA base path', ''),
@@ -510,8 +489,6 @@ def read_opts(env, cfg, args):
         (BoolVariable('WITH_BF_PLAYER', 'Build blenderplayer if true', False)),
         (BoolVariable('WITH_BF_NOBLENDER', 'Do not build blender if true', False)),
 
-        (BoolVariable('WITH_BF_IME', 'Enable Input Method Editor (IME) for complex Asian character input', False)),
-
         (BoolVariable('WITH_BF_3DMOUSE', 'Build blender with support of 3D mouses', False)),
         (BoolVariable('WITH_BF_STATIC3DMOUSE', 'Staticly link to 3d mouse library', False)),
         ('BF_3DMOUSE', '3d mouse library base path', ''),
@@ -579,22 +556,8 @@ def read_opts(env, cfg, args):
         (BoolVariable('WITH_BF_LZMA', 'Enable best LZMA pointcache compression', True)),
 
         (BoolVariable('WITH_BF_LIBMV', 'Enable libmv structure from motion library', True)),
-        (BoolVariable('WITH_BF_LIBMV_SCHUR_SPECIALIZATIONS', 'Enable fixed-size schur specializations', True)),
 
         (BoolVariable('WITH_BF_COMPOSITOR', 'Enable the tile based nodal compositor', True)),
-
-        (BoolVariable('WITH_BF_HDF5', 'Use HDF5 if true', False)),
-        ('BF_HDF5', 'HDF5 base path', ''),
-        ('BF_HDF5_LIB', 'HDF5 library', ''),
-        ('BF_HDF5_LIBPATH', 'HDF5 library path', ''),
-
-        (BoolVariable('WITH_BF_ALEMBIC', 'Use Alembic if true', False)),
-        (BoolVariable('WITH_BF_STATICALEMBIC', 'Staticly link to Alembic', False)),
-        ('BF_ALEMBIC', 'Alembic base path', ''),
-        ('BF_ALEMBIC_INC', 'Alembic include path', ''),
-        ('BF_ALEMBIC_LIB', 'Alembic library', ''),
-        ('BF_ALEMBIC_LIB_STATIC', 'Alembic static libraries', ''),
-        ('BF_ALEMBIC_LIBPATH', 'Alembic library path', ''),
     ) # end of opts.AddOptions()
 
     localopts.AddVariables(
@@ -622,8 +585,6 @@ def read_opts(env, cfg, args):
         ('BF_CYCLES_CUDA_NVCC', 'CUDA nvcc compiler path', ''),
         ('BF_CYCLES_CUDA_ENV', 'preset environement nvcc will execute in', ''),
         ('BF_CYCLES_CUDA_BINARIES_ARCH', 'CUDA architectures to compile binaries for', []),
-        (BoolVariable('WITH_BF_CYCLES_DEBUG', 'Build Cycles engine with extra debugging capabilities', False)),
-        (BoolVariable('WITH_BF_CYCLES_LOGGING', 'Build Cycles engine with logging support', True)),
 
         (BoolVariable('WITH_BF_OIIO', 'Build with OpenImageIO', False)),
         (BoolVariable('WITH_BF_STATICOIIO', 'Statically link to OpenImageIO', False)),
@@ -668,11 +629,7 @@ def read_opts(env, cfg, args):
         ('BF_LLVM_LIBPATH', 'LLVM library path', ''),
         ('BF_LLVM_LIB_STATIC', 'LLVM static library', ''),
 
-        ('BF_PROGRAM_LINKFLAGS', 'Link flags applied only to final binaries (blender and blenderplayer, not makesrna/makesdna)', ''),
-
-        (BoolVariable('WITH_BF_CPP11', '"Build with C++11 standard enabled, for development use only!', False)),
-
-        (BoolVariable('WITH_BF_LEGACY_DEPSGRAPH', 'Build Blender with legacy dependency graph', True)),
+        ('BF_PROGRAM_LINKFLAGS', 'Link flags applied only to final binaries (blender and blenderplayer, not makesrna/makesdna)', '')
     ) # end of opts.AddOptions()
 
     return localopts
@@ -729,6 +686,9 @@ def buildslave(target=None, source=None, env=None):
     else:
         platform = env['OURPLATFORM'].split('-')[0]
 
+    if env['OURPLATFORM'] in ('win32-vc', 'win64-vc') and env['MSVC_VERSION'] == '9.0':
+        platform = platform + '-vc9'
+
     if platform == 'linux':
         import platform
 

build_files/utils/build_tgz.sh

@@ -1,72 +0,0 @@
-#!/bin/sh
-
-# This script can run from any location,
-# output is created in the $CWD
-
-BASE_DIR="$PWD"
-
-blender_srcdir=$(dirname -- $0)/../..
-blender_version=$(grep "BLENDER_VERSION\s" "$blender_srcdir/source/blender/blenkernel/BKE_blender.h" | awk '{print $3}')
-blender_version_char=$(grep "BLENDER_VERSION_CHAR\s" "$blender_srcdir/source/blender/blenkernel/BKE_blender.h" | awk '{print $3}')
-blender_version_cycle=$(grep "BLENDER_VERSION_CYCLE\s" "$blender_srcdir/source/blender/blenkernel/BKE_blender.h" | awk '{print $3}')
-blender_subversion=$(grep "BLENDER_SUBVERSION\s" "$blender_srcdir/source/blender/blenkernel/BKE_blender.h" | awk '{print $3}')
-
-if [ "$blender_version_cycle" = "release" ] ; then
-	VERSION=$(expr $blender_version / 100).$(expr $blender_version % 100)$blender_version_char
-	SUBMODULE_EXCLUDE="^\(release/scripts/addons_contrib\)$"
-else
-	VERSION=$(expr $blender_version / 100).$(expr $blender_version % 100)_$blender_subversion
-	SUBMODULE_EXCLUDE="^$"  # dummy regex
-fi
-
-MANIFEST="blender-$VERSION-manifest.txt"
-TARBALL="blender-$VERSION.tar.gz"
-
-cd "$blender_srcdir"
-
-# not so nice, but works
-FILTER_FILES_PY=\
-"import os, sys; "\
-"[print(l[:-1]) for l in sys.stdin.readlines() "\
-"if os.path.isfile(l[:-1]) "\
-"if os.path.basename(l[:-1]) not in {"\
-"'.gitignore', "\
-"'.gitmodules', "\
-"'.arcconfig', "\
-"}"\
-"]"
-
-# Build master list
-echo -n "Building manifest of files:  \"$BASE_DIR/$MANIFEST\" ..."
-git ls-files | python3 -c "$FILTER_FILES_PY" > $BASE_DIR/$MANIFEST
-
-# Enumerate submodules
-for lcv in $(git submodule | awk '{print $2}' | grep -v "$SUBMODULE_EXCLUDE"); do
-	cd "$BASE_DIR"
-	cd "$blender_srcdir/$lcv"
-	git ls-files | python3 -c "$FILTER_FILES_PY" | awk '$0="'"$lcv"/'"$0' >> $BASE_DIR/$MANIFEST
-	cd "$BASE_DIR"
-done
-echo "OK"
-
-
-# Create the tarball
-cd "$blender_srcdir"
-echo -n "Creating archive:            \"$BASE_DIR/$TARBALL\" ..."
-GZIP=-9 tar --transform "s,^,blender-$VERSION/,g" -zcf "$BASE_DIR/$TARBALL" -T "$BASE_DIR/$MANIFEST"
-echo "OK"
-
-
-# Create checksum file
-cd "$BASE_DIR"
-echo -n "Createing checksum:          \"$BASE_DIR/$TARBALL.md5sum\" ..."
-md5sum "$TARBALL" > "$TARBALL.md5sum"
-echo "OK"
-
-
-# Cleanup
-echo -n "Cleaning up ..."
-rm "$BASE_DIR/$MANIFEST"
-echo "OK"
-
-echo "Done!"

doc/blender_file_format/BlendFileDnaExporter_25.py

@@ -112,7 +112,7 @@ class DNACatalogHTML:
         # ${version} and ${revision}
         if bpy:
             version = '.'.join(map(str, bpy.app.version))
-            revision = bpy.app.build_hash
+            revision = bpy.app.build_revision[:-1]
         else:
             version = str(header.Version)
             revision = 'Unknown'
@@ -404,7 +404,7 @@ def main():
         # Files
         if '--dna-versioned' in sys.argv:
             blender_version = '_'.join(map(str, bpy.app.version))
-            filename = 'dna-{0}-{1}_endian-{2}-{3}'.format(sys.arch, sys.byteorder, blender_version, bpy.app.build_hash)
+            filename = 'dna-{0}-{1}_endian-{2}-r{3}'.format(sys.arch, sys.byteorder, blender_version, bpy.app.build_revision[2:-1])
         else:
             filename = 'dna'
         dir = os.path.dirname(__file__)
@@ -451,7 +451,7 @@ def main():
             os.remove(Path_Blend)
         
         # export dna to xhtml
-        log.info("6: export sdna to xhtml file: %r" % Path_HTML)
+        log.info("6: export sdna to xhtml file")
         handleHTML = open(Path_HTML, "w")
         catalog.WriteToHTML(handleHTML)
         handleHTML.close()

doc/build_systems/scons-dev.txt

@@ -35,14 +35,13 @@
     defaults.
 
     Much of the actual functionality can be found in the python scripts
-    in the directory $BLENDERHOME/build_files/scons/tools, with
-    Blender.py defining the bulk of the functionality. btools.py has some
-    helper functions, and bcolors.py is for the terminal
-    colors. mstoolkit.py and crossmingw.py are modules which set up SCons
-    for the MS VC++ 2003 toolkit and the cross-compile toolset for
-    compiling Windows binaries on Linux respectively. Note: the
-    cross-compile doesn't work yet for Blender, but is added in
-    preparation for having it work in the distant future.
+    in the directory $BLENDERHOME/tools, with Blender.py defining the
+    bulk of the functionality. btools.py has some helper functions, and
+    bcolors.py is for the terminal colors. mstoolkit.py and crossmingw.py
+    are modules which set up SCons for the MS VC++ 2003 toolkit and
+    the cross-compile toolset for compiling Windows binaries on Linux
+    respectively. Note: the cross-compile doesn't work yet for Blender,
+    but is added in preparation for having it work in the distant future.
 
     BlenderEnvironment
     ------------------

doc/build_systems/scons.txt

@@ -29,9 +29,9 @@
     a scons-local installation, which can be found in the scons/ subdirectory.
     This document uses the scons-local installation for its examples.
 
-    For build instructions, including dependencies, consult the appropriate
-    section for your platform at
-    http://wiki.blender.org/index.php/Dev:Doc/Building_Blender. Note that for
+    Check from the page
+    http://www.blender.org/development/building-blender/getting-dependencies/
+    that you have all dependencies needed for building Blender. Note that for
     windows many of these dependencies already come in the lib/windows module
     from CVS.
 
@@ -53,13 +53,12 @@
     from the command-line is given, then all libraries and binaries to
     build are configured.
 
-    The build uses BF_BUILDDIR to build into and BF_INSTALLDIR to finally copy
-    all needed files to get a proper setup. The BF_DOCDIR is used to generate
-    Blender Python documentation files to. These variables have default values
-    for every platform in
-    $BLENDERHOME/build_files/scons/config/(platform)-config.py. See the next
-    section of this document for how to customize these paths. After the build
-    successfully completes, you can find everything you need in BF_INSTALLDIR.
+    The build uses BF_BUILDDIR to build into and BF_INSTALLDIR to
+    finally copy all needed files to get a proper setup. The BF_DOCDIR is
+    used to generate Blender Python documentation files to. These
+    variables have default values for every platform in
+    $BLENDERHOME/config/(platform)-config.py. After the build successfully
+    completes, you can find everything you need in BF_INSTALLDIR.
 
     If you want to create the installer package of Blender on Windows you'll
     need to install nullsoft scriptable install system from http://nsis.sf.net.
@@ -73,8 +72,8 @@
     ---------------------
 
     The default values for your platform can be found in the directory
-    $BLENDERHOME/build_files/scons/config. Your platform specific defaults are
-    in (platform)-config.py, where platform is one of:
+    $BLENDERHOME/config. Your platform specific defaults are in
+    (platform)-config.py, where platform is one of:
 
         - linux, for machines running Linux
         - win32-vc, for Windows machines, compiling with a Microsoft compiler
@@ -82,13 +81,12 @@
         - darwin, for OS X machines
         (TBD: add cygwin, solaris and freebsd support)
 
-    These files you will normally not change. If you need to override a
-    default value, make a file called $BLENDERHOME/user-config.py, and copy
-    settings from the build_files/scons/config/(platform)-config.py that you
-    want to change. Don't copy the entire file (unless explicitly stated in
-    the configuration file), because you may not get updated options you don't
-    change yourself, which may result in build errors. You should NEVER have
-    to modify $BLENDERHOME/build_files/scons/config/(platform)-config.py.
+    These files you will normally not change. If you need to override
+    a default value, make a file called  $BLENDERHOME/user-config.py, and copy
+    settings from the config/(platform)-config.py that you want to change. Don't
+    copy the entire file (unless explicitely stated in the configuration file),
+    because you may not get updated options you don't change yourself, which may
+    result in build errors.
 
     You can use BF_CONFIG argument to override the default user-config.py
     check. This is just like the user-config.py, but just with another name:
@@ -115,6 +113,11 @@
     (unless you have overridden any of them in your
     $BLENDERHOME/user-config.py).
 
+    NOTE: The best way to avoid confusion is the
+    copy $BLENDERHOME/config/(platform)-config.py to
+    $BLENDERHOME/user-config.py. You should NEVER have to modify
+    $BLENDERHOME/config/(platform)-config.py
+
     Configuring the output
     ----------------------
 

doc/doxygen/doxygen.intern

@@ -10,14 +10,26 @@
  *  \ingroup intern
  */
 
+/** \defgroup boolop boolop
+ *  \ingroup intern
+ */
+
 /** \defgroup ctr container
  *  \ingroup intern
  */
 
+/** \defgroup decimation decimation
+ *  \ingroup intern
+ */
+
 /** \defgroup elbeem elbeem
  *  \ingroup intern
  */
 
+/** \defgroup bsp bsp
+ *  \ingroup intern
+ */
+
 /** \defgroup iksolver iksolver
  *  \ingroup intern
  */

doc/doxygen/doxygen.main

@@ -7,7 +7,7 @@
  * These pages document the source code of blender.
  *
  * \subsection implinks Important Links
- * - <a href="http://developer.blender.org">developer.blender.org</a> with bug tracker
+ * - <a href="http://projects.blender.org">projects.blender.org</a> with <a href="http://projects.blender.org/tracker/index.php?group_id=9&atid=498">bug tracker</a>
  * - <a href="http://wiki.blender.org/index.php/Dev:Contents">Development documents</a> on our wiki.
  *
  * \subsection blother Other

doc/doxygen/doxygen.source

@@ -93,44 +93,36 @@
 
 /* ================================ */
 
-/** \defgroup blender Blender */
+/** \defgroup blender blender */
 
-/** \defgroup blf BlenFont
+/** \defgroup blf blenfont
  *  \ingroup blender
  */
 
-/** \defgroup bke BlenKernel
+/** \defgroup bke blenkernel
  *  \ingroup blender
  */
 
-/** \defgroup bli BlenLib
+/** \defgroup bli blenlib
  *  \ingroup blender
  */
 
-/** \defgroup depsgraph Dependency Graph
+/** \defgroup nodes nodes
  *  \ingroup blender
  */
 
-/** \defgroup bph Physics
- *  \ingroup blender
- */
-
-/** \defgroup nodes Nodes
- *  \ingroup blender
- */
-
-/** \defgroup cmpnodes Nodes (Compositor)
+/** \defgroup cmpnodes cmpnodes
  *  \ingroup nodes
  */
 
-/** \defgroup shdnodes Nodes (Shader)
+/** \defgroup shdnodes shdnodes
  *  \ingroup nodes
  */
 
-/** \defgroup texnodes Nodes (Texture)
+/** \defgroup texnodes texnodes
  *  \ingroup nodes
  */
-/** \defgroup modifiers Object Modifiers
+/** \defgroup modifiers modifiers
  *  \ingroup blender
  */
 
@@ -140,29 +132,29 @@
  *  \ingroup blender
  */
 
-/** \defgroup ikplugin IK Plugin
+/** \defgroup ikplugin ikplugin
  *  \ingroup blender
  */
 
-/** \defgroup DNA Struct DNA (File Format)
+/** \defgroup DNA sDNA
  *  \ingroup blender data
  */
-/** \defgroup RNA RNA (Data API)
+/** \defgroup RNA RNA
  *  \ingroup blender data
  */
 
-/** \defgroup blenloader Blend file IO
+/** \defgroup blenloader .blend read and write functions
  *  \ingroup blender data
  *  \todo check if \ref blo and \ref blenloader groups can be
  *   merged in docs.
  */
 
-/** \defgroup quicktime QuickTime
+/** \defgroup quicktime quicktime
  *  \ingroup blender
 
 /** \defgroup gui GUI */
 
-/** \defgroup wm Window Manager
+/** \defgroup wm windowmanager
  *  \ingroup blender gui
  */
 
@@ -332,7 +324,7 @@
  *  \ingroup externformats
  */
 
-/** \defgroup imbuf Image Buffer (ImBuf)
+/** \defgroup imbuf IMage Buffer
  *  \ingroup blender
  */
 

doc/manpage/blender.1.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/python
 
 # ##### BEGIN GPL LICENSE BLOCK #####
 #
@@ -31,6 +31,7 @@ and <output-filename> is where to write the generated man page.
 # <pep8 compliant>
 
 import subprocess
+import os
 import sys
 
 import time

doc/python_api/examples/bge.constraints.py

@@ -20,15 +20,15 @@ constraint_type = 2
 physics_id_1 = object_1.getPhysicsId()
 physics_id_2 = object_2.getPhysicsId()
 
-# use bottom right edge of Object1 for hinge position
+# Use bottom right edge of Object1 for hinge position
 edge_position_x = 1.0
 edge_position_y = 0.0
 edge_position_z = -1.0
 
-# rotate the pivot z axis about 90 degrees
+# use Object1 y axis for angle to point hinge
 edge_angle_x = 0.0
-edge_angle_y = 0.0
-edge_angle_z = 90.0
+edge_angle_y = 1.0
+edge_angle_z = 0.0
 
 # create an edge constraint
 constraints.createConstraint(physics_id_1, physics_id_2,

doc/python_api/examples/bpy.ops.2.py

@@ -1,19 +1,16 @@
 """
-.. _operator-execution_context:
-
 Execution Context
 -----------------
 
 When calling an operator you may want to pass the execution context.
 
-This determines the context that is given for the operator to run in, and whether
-invoke() is called or only execute().
+This determines the context thats given to the operator to run in, and weather
+invoke() is called or execute().
 
-'EXEC_DEFAULT' is used by default, running only the execute() method, but you may
-want the operator to take user interaction with 'INVOKE_DEFAULT' which will also
-call invoke() if existing.
+'EXEC_DEFAULT' is used by default but you may want the operator to take user
+interaction with 'INVOKE_DEFAULT'.
 
-The execution context is one of:
+The execution context is as a non keyword, string argument in:
 ('INVOKE_DEFAULT', 'INVOKE_REGION_WIN', 'INVOKE_REGION_CHANNELS',
 'INVOKE_REGION_PREVIEW', 'INVOKE_AREA', 'INVOKE_SCREEN', 'EXEC_DEFAULT',
 'EXEC_REGION_WIN', 'EXEC_REGION_CHANNELS', 'EXEC_REGION_PREVIEW', 'EXEC_AREA',

doc/python_api/examples/bpy.props.2.py

@@ -3,7 +3,7 @@ PropertyGroup Example
 +++++++++++++++++++++
 
 PropertyGroups can be used for collecting custom settings into one value
-to avoid many individual settings mixed in together.
+to avoid many indervidual settings mixed in together.
 """
 
 import bpy

doc/python_api/examples/bpy.props.5.py

@@ -75,7 +75,7 @@ print(scene.test_float)
 scene.test_array = (True, False)
 print([x for x in scene.test_array])
 
-# scene.test_date = "blah"   # this would fail, property is read-only
+#scene.test_date = "blah"   # this would fail, property is read-only
 print(scene.test_date)
 
 scene.test_enum = 'BLUE'

doc/python_api/examples/bpy.props.py

@@ -6,7 +6,7 @@ Custom properties can be added to any subclass of an :class:`ID`,
 :class:`Bone` and :class:`PoseBone`.
 
 These properties can be animated, accessed by the user interface and python
-like Blender's existing properties.
+like blenders existing properties.
 """
 
 import bpy

doc/python_api/examples/bpy.types.Menu.2.py

@@ -1,11 +1,12 @@
 """
 Extending Menus
 +++++++++++++++
-When creating menus for addons you can't reference menus in Blender's default
+When creating menus for addons you can't reference menus in blenders default
 scripts.
-Instead, the addon can add menu items to existing menus.
 
-The function menu_draw acts like :class:`Menu.draw`.
+Instead the addon can add menu items to existing menus.
+
+The function menu_draw acts like Menu.draw
 """
 import bpy
 

doc/python_api/examples/bpy.types.Menu.py

@@ -1,20 +1,21 @@
 """
 Basic Menu Example
 ++++++++++++++++++
-Here is an example of a simple menu. Menus differ from panels in that they must
+This script is a simple menu, menus differ from panels in that they must
 reference from a header, panel or another menu.
 
-Notice the 'CATEGORY_MT_name' in  :class:`Menu.bl_idname`, this is a naming
+Notice the 'CATEGORY_MT_name' :class:`Menu.bl_idname`, this is a naming
 convention for menus.
 
 .. note::
+
    Menu subclasses must be registered before referencing them from blender.
 
 .. note::
-   Menus have their :class:`Layout.operator_context` initialized as
-   'EXEC_REGION_WIN' rather than 'INVOKE_DEFAULT' (see :ref:`Execution Context <operator-execution_context>`).
-   If the operator context needs to initialize inputs from the
-   :class:`Operator.invoke` function, then this needs to be explicitly set.
+   Menu's have their :class:`Layout.operator_context` initialized as
+   'EXEC_REGION_WIN' rather then 'INVOKE_DEFAULT', so if the operator context
+   needs to initialize inputs from the :class:`Operator.invoke` function
+   then this needs to be explicitly set.
 """
 import bpy
 

doc/python_api/examples/bpy.types.Operator.5.py

@@ -39,7 +39,7 @@ class ModalOperator(bpy.types.Operator):
             self.execute(context)
         elif event.type == 'LEFTMOUSE':  # Confirm
             return {'FINISHED'}
-        elif event.type in {'RIGHTMOUSE', 'ESC'}:  # Cancel
+        elif event.type in ('RIGHTMOUSE', 'ESC'):  # Cancel
             context.object.location.x = self.init_loc_x
             return {'CANCELLED'}
 

doc/python_api/examples/bpy.types.Panel.2.py

@@ -7,7 +7,7 @@ A mix-in parent class can be used to share common properties and
 import bpy
 
 
-class View3DPanel:
+class View3DPanel():
     bl_space_type = 'VIEW_3D'
     bl_region_type = 'TOOLS'
 

doc/python_api/examples/bpy.types.bpy_prop_collection.foreach_get.py

@@ -8,3 +8,4 @@ collection.foreach_get(attr, some_seq)
 # Python equivalent
 for i in range(len(seq)):
     some_seq[i] = getattr(collection[i], attr)
+

doc/python_api/examples/mathutils.Quaternion.py

@@ -21,12 +21,3 @@ print(quat_out)
 print("%.2f, %.2f, %.2f" % tuple(math.degrees(a) for a in quat_out.to_euler()))
 print("(%.2f, %.2f, %.2f), %.2f" % (quat_out.axis[:] +
                                     (math.degrees(quat_out.angle), )))
-
-# multiple rotations can be interpolated using the exponential map
-quat_c = mathutils.Quaternion((1.0, 0.0, 0.0), math.radians(15.0))
-exp_avg = (quat_a.to_exponential_map() +
-           quat_b.to_exponential_map() +
-           quat_c.to_exponential_map()) / 3.0
-quat_avg = mathutils.Quaternion(exp_avg)
-print("Average rotation:")
-print(quat_avg)

doc/python_api/examples/mathutils.Vector.py

@@ -18,16 +18,16 @@ matrix = mathutils.Matrix()
 
 # Comparison operators can be done on Vector classes:
 
-# (In)equality operators == and != test component values, e.g. 1,2,3 != 3,2,1
-vec_a == vec_b
-vec_a != vec_b
-
-# Ordering operators >, >=, > and <= test vector length.
+# greater and less then test vector length.
 vec_a > vec_b
 vec_a >= vec_b
 vec_a < vec_b
 vec_a <= vec_b
 
+# ==, != test vector values e.g. 1,2,3 != 3,2,1 even if they are the same length
+vec_a == vec_b
+vec_a != vec_b
+
 
 # Math can be performed on Vector classes
 vec_a + vec_b

doc/python_api/rst/bge.constraints.rst

@@ -11,54 +11,50 @@ Physics Constraints (bge.constraints)
 .. literalinclude:: ../examples/bge.constraints.py
    :lines: 6-
 
-.. function:: createConstraint(physicsid_1, physicsid_2, constraint_type, pivot_X, pivot_y, pivot_z, axis_x, axis_y, axis_z, flag)
+.. function:: createConstraint(physicsid, physicsid2, constrainttype, [pivotX, pivotY, pivotZ, [axisX, axisY, axisZ, [flag]]]])
 
    Creates a constraint.
 
-   Constraints types:
-      - :class:`POINTTOPOINT_CONSTRAINT`
-      - :class:`LINEHINGE_CONSTRAINT`
-      - :class:`ANGULAR_CONSTRAINT`
-      - :class:`CONETWIST_CONSTRAINT`
-      - :class:`VEHICLE_CONSTRAINT`
-      - :class:`GENERIC_6DOF_CONSTRAINT` 
+   :arg physicsid: the physics id of the first object in constraint
+   :type physicsid: int
 
-   :arg physicsid_1: the physics id of the first object in constraint.
-   :type physicsid_1: int
+   :arg physicsid2: the physics id of the second object in constraint
+   :type physicsid2: int
 
-   :arg physicsid_2: the physics id of the second object in constraint.
-   :type physicsid_2: int
+   :arg constrainttype: the type of the constraint. The constraint types are:
+
+   - :class:`POINTTOPOINT_CONSTRAINT`
+   - :class:`LINEHINGE_CONSTRAINT`
+   - :class:`ANGULAR_CONSTRAINT`
+   - :class:`CONETWIST_CONSTRAINT`
+   - :class:`VEHICLE_CONSTRAINT`
 
-   :arg constrainttype: the type of the constraint.
    :type constrainttype: int
 
-   :arg pivot_X: pivot X position (optional).
-   :type pivot_X: float
+   :arg pivotX: pivot X position
+   :type pivotX: float
 
-   :arg pivot_Y: pivot Y position (optional).
-   :type pivot_Y: float
+   :arg pivotY: pivot Y position
+   :type pivotY: float
 
-   :arg pivot_Z: pivot Z position (optional).
-   :type pivot_Z: float
+   :arg pivotZ: pivot Z position
+   :type pivotZ: float
 
-   :arg axis_X: X axis angle in degrees (optional).
-   :type axis_X: float
+   :arg axisX: X axis
+   :type axisX: float
 
-   :arg axis_Y: Y axis angle in degrees (optional).
-   :type axis_Y: float
+   :arg axisY: Y axis
+   :type axisY: float
 
-   :arg axis_Z: Z axis angle in degrees (optional).
-   :type axis_Z: float
+   :arg axisZ: Z axis
+   :type axisZ: float
 
-   :arg flag: 128 to disable collision between linked bodies (optional).
+   :arg flag: .. to do
    :type flag: int
 
-   :return: a constraint wrapper.
-   :rtype: :class:`bge.types.KX_ConstraintWrapper`
-
 .. attribute:: error
 
-   Symbolic constant string that indicates error.
+   Simbolic constant string that indicates error.
 
 .. function:: exportBulletFile(filename)
 
@@ -372,10 +368,3 @@ Physics Constraints (bge.constraints)
       Constraint type to be used with function :class:`createConstraint`
 
    .. to do
-
-.. data:: GENERIC_6DOF_CONSTRAINT
-
-   .. note::
-      Constraint type to be used with function :class:`createConstraint`
-
-   .. to do

doc/python_api/rst/bge.logic.rst

@@ -868,23 +868,6 @@ See :class:`bge.types.KX_SteeringActuator.behavior`
 
    :value: 3
 
-.. _logic-trackto-actuator:
-
------------------
-TrackTo Actuator
------------------
-
-See :class:`bge.types.KX_TrackToActuator`
-
-.. data:: KX_TRACK_UPAXIS_POS_X
-.. data:: KX_TRACK_UPAXIS_POS_Y
-.. data:: KX_TRACK_UPAXIS_POS_Z
-.. data:: KX_TRACK_TRAXIS_POS_X
-.. data:: KX_TRACK_TRAXIS_POS_Y
-.. data:: KX_TRACK_TRAXIS_POS_Z
-.. data:: KX_TRACK_TRAXIS_NEG_X
-.. data:: KX_TRACK_TRAXIS_NEG_Y
-.. data:: KX_TRACK_TRAXIS_NEG_Z
 
 =======
 Various

doc/python_api/rst/bge.render.rst

@@ -8,13 +8,9 @@ Intro
 
 .. module:: bge.render
 
-Example of using a :class:`bge.types.SCA_MouseSensor`, and two :class:`bge.types.KX_ObjectActuator` to implement MouseLook:
-
-.. note::
-   This can also be achieved with the :class:`bge.types.KX_MouseActuator`.
-
 .. code-block:: python
 
+   # Example Uses an L{SCA_MouseSensor}, and two L{KX_ObjectActuator}s to implement MouseLook::
    # To use a mouse movement sensor "Mouse" and a
    # motion actuator to mouse look:
    import bge
@@ -66,7 +62,7 @@ Constants
 .. data:: KX_BLENDER_GLSL_MATERIAL
 
    Materials approximating blender materials with GLSL.
-
+   
 .. DATA:: VSYNC_OFF
 
    Disables vsync
@@ -79,15 +75,6 @@ Constants
 
    Enables adaptive vsync if supported. Adaptive vsync enables vsync if the framerate is above the monitors refresh rate. Otherwise, vsync is diabled if the framerate is too low.
 
-.. data:: LEFT_EYE
-
-   Left eye being used during stereoscopic rendering.
-
-.. data:: RIGHT_EYE
-
-   Right eye being used during stereoscopic rendering.
-
-
 *********
 Functions
 *********
@@ -95,55 +82,47 @@ Functions
 .. function:: getWindowWidth()
 
    Gets the width of the window (in pixels)
-
+   
    :rtype: integer
 
 .. function:: getWindowHeight()
 
    Gets the height of the window (in pixels)
-
+   
    :rtype: integer
 
 .. function:: setWindowSize(width, height)
 
    Set the width and height of the window (in pixels). This also works for fullscreen applications.
-
+   
    :type width: integer
    :type height: integer
 
 .. function:: setFullScreen(enable)
 
    Set whether or not the window should be fullscreen.
-
+   
    :type enable: bool
 
 .. function:: getFullScreen()
 
    Returns whether or not the window is fullscreen.
-
-   :rtype: bool
-
-.. function:: getDisplayDimensions()
-
-   Get the actual display dimensions, in pixels, of the physical display (e.g., the monitor).
    
-   :type dimension: list [width,heigh] 
+   :rtype: bool
 
 .. function:: makeScreenshot(filename)
 
-   Writes an image file with the current displayed frame.
-
-   The image is written to *'filename'*. The path may be absolute (eg. "/home/foo/image") or relative when started with
-   "//" (eg. "//image"). Note that absolute paths are not portable between platforms.
-   If the filename contains a "#", it will be replaced by an incremental index so that screenshots can be taken multiple
-   times without overwriting the previous ones (eg. "image-#").
-
-   Settings for the image are taken from the render settings (file format and respective settings, gamma and colospace
-   conversion, etc). The image resolution matches the framebuffer, meaning, the window size and aspect ratio.
-   When running from the standalone player, instead of the embedded player, only PNG files are supported. Additional
-   color conversions are also not supported.
-
-   :arg filename: path and name of the file to write
+   Writes a screenshot to the given filename.
+   
+   If filename starts with // the image will be saved relative to the current directory.
+   If the filename contains # it will be replaced with the frame number.
+   
+   The standalone player saves .png files. It does not support color space conversion 
+   or gamma correction.
+   
+   When run from Blender, makeScreenshot supports all Blender image file formats like PNG, TGA, Jpeg and OpenEXR.
+   Gamma, Colorspace conversion and Jpeg compression are taken from the Render settings panels.
+   
    :type filename: string
 
 
@@ -155,29 +134,65 @@ Functions
 .. function:: showMouse(visible)
 
    Enables or disables the operating system mouse cursor.
-
+   
    :type visible: boolean
 
 
 .. function:: setMousePosition(x, y)
 
    Sets the mouse cursor position.
-
+   
    :type x: integer
    :type y: integer
 
 
 .. function:: setBackgroundColor(rgba)
 
-   Sets the window background color. (Deprecated: use KX_WorldInfo.background_color)
-
+   Sets the window background color.
+   
    :type rgba: list [r, g, b, a]
 
 
+.. function:: setMistColor(rgb)
+
+   Sets the mist color.
+   
+   :type rgb: list [r, g, b]
+
+   
+.. function:: setAmbientColor(rgb)
+
+   Sets the color of ambient light.
+   
+   :type rgb: list [r, g, b]
+
+
+.. function:: setMistStart(start)
+
+   Sets the mist start value.  Objects further away than start will have mist applied to them.
+   
+   :type start: float
+
+
+.. function:: setMistEnd(end)
+
+   Sets the mist end value.  Objects further away from this will be colored solid with
+   the color set by setMistColor().
+   
+   :type end: float
+
+   
+.. function:: disableMist()
+
+   Disables mist.
+   
+   .. note:: Set any of the mist properties to enable mist.
+
+   
 .. function:: setEyeSeparation(eyesep)
 
    Sets the eye separation for stereo mode. Usually Focal Length/30 provides a confortable value.
-
+   
    :arg eyesep: The distance between the left and right eye.
    :type eyesep: float
 
@@ -185,36 +200,27 @@ Functions
 .. function:: getEyeSeparation()
 
    Gets the current eye separation for stereo mode.
-
+   
    :rtype: float
 
-
+   
 .. function:: setFocalLength(focallength)
 
    Sets the focal length for stereo mode. It uses the current camera focal length as initial value.
-
-   :arg focallength: The focal length.
+   
+   :arg focallength: The focal length.  
    :type focallength: float
 
 .. function:: getFocalLength()
 
    Gets the current focal length for stereo mode.
-
+   
    :rtype: float
 
-.. function:: getStereoEye()
-
-   Gets the current stereoscopy eye being rendered.
-   This function is mainly used in a :class:`bge.types.KX_Scene.pre_draw` callback
-   function to customize the camera projection matrices for each
-   stereoscopic eye.
-
-   :rtype: LEFT_EYE, RIGHT_EYE
-
 .. function:: setMaterialMode(mode)
 
    Set the material mode to use for OpenGL rendering.
-
+   
    :type mode: KX_TEXFACE_MATERIAL, KX_BLENDER_MULTITEX_MATERIAL, KX_BLENDER_GLSL_MATERIAL
 
    .. note:: Changes will only affect newly created scenes.
@@ -223,14 +229,14 @@ Functions
 .. function:: getMaterialMode(mode)
 
    Get the material mode to use for OpenGL rendering.
-
+   
    :rtype: KX_TEXFACE_MATERIAL, KX_BLENDER_MULTITEX_MATERIAL, KX_BLENDER_GLSL_MATERIAL
 
 
 .. function:: setGLSLMaterialSetting(setting, enable)
 
    Enables or disables a GLSL material setting.
-
+   
    :type setting: string (lights, shaders, shadows, ramps, nodes, extra_textures)
    :type enable: boolean
 
@@ -238,43 +244,43 @@ Functions
 .. function:: getGLSLMaterialSetting(setting, enable)
 
    Get the state of a GLSL material setting.
-
+   
    :type setting: string (lights, shaders, shadows, ramps, nodes, extra_textures)
    :rtype: boolean
 
 .. function:: setAnisotropicFiltering(level)
 
    Set the anisotropic filtering level for textures.
-
+   
    :arg level: The new anisotropic filtering level to use
    :type level: integer (must be one of 1, 2, 4, 8, 16)
-
+   
    .. note:: Changing this value can cause all textures to be recreated, which can be slow.
-
+   
 .. function:: getAnisotropicFiltering()
 
    Get the anisotropic filtering level used for textures.
-
+   
    :rtype: integer (one of 1, 2, 4, 8, 16)
 
 .. function:: setMipmapping(value)
 
    Change how to use mipmapping.
-
+   
    :type value: RAS_MIPMAP_NONE, RAS_MIPMAP_NEAREST, RAS_MIPMAP_LINEAR
-
+   
    .. note:: Changing this value can cause all textures to be recreated, which can be slow.
 
 .. function:: getMipmapping()
 
    Get the current mipmapping setting.
-
+   
    :rtype: RAS_MIPMAP_NONE, RAS_MIPMAP_NEAREST, RAS_MIPMAP_LINEAR
-
+   
 .. function:: drawLine(fromVec,toVec,color)
 
    Draw a line in the 3D scene.
-
+   
    :arg fromVec: the origin of the line
    :type fromVec: list [x, y, z]
    :arg toVec: the end of the line
@@ -286,7 +292,7 @@ Functions
 .. function:: enableMotionBlur(factor)
 
    Enable the motion blur effect.
-
+   
    :arg factor: the ammount of motion blur to display.
    :type factor: float [0.0 - 1.0]
 

doc/python_api/rst/bge_types/bge.types.KX_CharacterWrapper.rst

@@ -37,7 +37,7 @@ base class --- :class:`PyObjectPlus`
 
       The speed and direction the character is traveling in using world coordinates. This should be used instead of applyMovement() to properly move the character.
 
-      :type: Vector((x, y, z))
+      :type: list [x, y, z]
 
    .. method:: jump()
 

doc/python_api/rst/bge_types/bge.types.KX_ConstraintWrapper.rst

@@ -11,132 +11,8 @@ base class --- :class:`PyObjectPlus`
 
    .. method:: getConstraintId(val)
 
-      Returns the contraint ID
+      Returns the contraint's ID
 
-      :return: the constraint ID
+      :return: the constraint's ID
       :rtype: integer
 
-   .. method:: setParam(axis, value0, value1)
-
-      Set the contraint limits
-
-      :arg axis:
-      :type axis: integer
-
-      .. note::
-         * Lowerlimit == Upperlimit -> axis is locked
-         * Lowerlimit > Upperlimit -> axis is free
-         * Lowerlimit < Upperlimit -> axis it limited in that range
-
-      For PHY_LINEHINGE_CONSTRAINT = 2 or PHY_ANGULAR_CONSTRAINT = 3:
-
-      axis = 3 is a constraint limit, with low/high limit value
-         * 3: X axis angle
-
-      :arg value0 (min): Set the minimum limit of the axis
-      :type value0: float
-      :arg value1 (max): Set the maximum limit of the axis
-      :type value1: float
-
-      For PHY_CONE_TWIST_CONSTRAINT = 4:
-
-      axis = 3..5 are constraint limits, high limit values
-         * 3: X axis angle
-         * 4: Y axis angle
-         * 5: Z axis angle
-
-      :arg value0 (min): Set the minimum limit of the axis
-      :type value0: float
-      :arg value1 (max): Set the maximum limit of the axis
-      :type value1: float
-
-      For PHY_GENERIC_6DOF_CONSTRAINT = 12:
-
-      axis = 0..2 are constraint limits, with low/high limit value
-         * 0: X axis position
-         * 1: Y axis position
-         * 2: Z axis position
-
-      axis = 3..5 are relative constraint (Euler) angles in radians
-         * 3: X axis angle
-         * 4: Y axis angle
-         * 5: Z axis angle
-
-      :arg value0 (min): Set the minimum limit of the axis
-      :type value0: float
-      :arg value1 (max): Set the maximum limit of the axis
-      :type value1: float
-
-      axis = 6..8 are translational motors, with value0=target velocity, value1 = max motor force
-         * 6: X axis position
-         * 7: Y axis position
-         * 8: Z axis position
-
-      axis = 9..11 are rotational motors, with value0=target velocity, value1 = max motor force
-         * 9: X axis angle
-         * 10: Y axis angle
-         * 11: Z axis angle
-
-      :arg value0 (speed): Set the linear velocity of the axis
-      :type value0: float Range: -10,000.00 to 10,000.00
-      :arg value1 (force): Set the maximum force limit of the axis
-      :type value1: float Range: -10,000.00 to 10,000.00
-
-      axis = 12..14 are for linear springs on each of the position of freedom
-         * 12: X axis position
-         * 13: Y axis position
-         * 14: Z axis position
-
-      axis = 15..17 are for angular springs on each of the angle of freedom in radians
-         * 15: X axis angle
-         * 16: Y axis angle
-         * 17: Z axis angle
-
-      :arg value0 (stiffness): Set the stiffness of the spring
-      :type value0: float
-      :arg value1 (damping): Tendency of the spring to return to it's original position
-      :type value1: float
-                    1.0 = springs back to original position (no damping)
-                    0.0 = don't springs back
-
-   .. method:: getParam(axis)
-
-      Get the contraint position or euler angle of a generic 6DOF constraint
-
-      :arg axis:
-      :type axis: integer
-
-      axis = 0..2 are linear constraint values
-         * 0: X axis position
-         * 1: Y axis position
-         * 2: Z axis position
-
-      :return: position
-      :rtype: float
-
-      axis = 3..5 are relative constraint (Euler) angles in radians 
-         * 3: X axis angle
-         * 4: Y axis angle
-         * 5: Z axis angle
-
-      :return: angle
-      :rtype: float
-
-   .. attribute:: constraint_id
-
-      Returns the contraint ID  (read only)
-
-      :type: integer
-
-   .. attribute:: constraint_type
-
-      Returns the contraint type (read only)
-
-      :type: integer
-      - 1 = :class:`~bge.constraints.POINTTOPOINT_CONSTRAINT`
-      - 2 = :class:`~bge.constraints.LINEHINGE_CONSTRAINT`
-      - 3 = :class:`~bge.constraints.ANGULAR_CONSTRAINT`
-      - 4 = :class:`~bge.constraints.CONETWIST_CONSTRAINT`
-      - 11 = :class:`~bge.constraints.VEHICLE_CONSTRAINT`
-      - 12 = :class:`~bge.constraints.GENERIC_6DOF_CONSTRAINT`
-

doc/python_api/rst/bge_types/bge.types.KX_FontObject.rst

@@ -7,26 +7,6 @@ base class --- :class:`KX_GameObject`
 
 .. class:: KX_FontObject(KX_GameObject)
 
-   A Font object.
+   TODO.
 
-   .. code-block:: python
-
-      # Display a message about the exit key using a Font object.
-      import bge
-
-      co = bge.logic.getCurrentController()
-      font = co.owner
-
-      exit_key = bge.events.EventToString(bge.logic.getExitKey())
-
-      if exit_key.endswith("KEY"):
-          exit_key = exit_key[:-3]
-
-      font.text = "Press key '%s' to quit the game." % exit_key
-
-   .. attribute:: text
-
-      The text displayed by this Font object.
-
-      :type: string
 

doc/python_api/rst/bge_types/bge.types.KX_GameObject.rst

@@ -78,35 +78,6 @@ base class --- :class:`SCA_IObject`
 
          The object must have a physics controller for the mass to be applied, otherwise the mass value will be returned as 0.0.
 
-   .. attribute:: isSuspendDynamics
-
-      The object's dynamic state (read-only).
-
-      :type: boolean
-
-      .. seealso:: :py:meth:`suspendDynamics` and :py:meth:`restoreDynamics` allow you to change the state.
-
-   .. attribute:: linearDamping
-
-      The object's linear damping, also known as translational damping. Can be set simultaneously with angular damping using the :py:meth:`setDamping` method.
-
-      :type: float between 0 and 1 inclusive.
-
-      .. note::
-
-         The object must have a physics controller for the linear damping to be applied, otherwise the value will be returned as 0.0.
-
-   .. attribute:: angularDamping
-
-      The object's angular damping, also known as rotationation damping. Can be set simultaneously with linear damping using the :py:meth:`setDamping` method.
-
-      :type: float between 0 and 1 inclusive.
-
-      .. note::
-
-         The object must have a physics controller for the angular damping to be applied, otherwise the value will be returned as 0.0.
-
-
    .. attribute:: linVelocityMin
 
       Enforces the object keeps moving at a minimum velocity.
@@ -143,7 +114,7 @@ base class --- :class:`SCA_IObject`
 
       the object's inertia vector in local coordinates. Read only.
 
-      :type: Vector((ix, iy, iz))
+      :type: list [ix, iy, iz]
 
    .. attribute:: parent
 
@@ -153,70 +124,21 @@ base class --- :class:`SCA_IObject`
 
    .. attribute:: groupMembers
 
-      Returns the list of group members if the object is a group object (dupli group instance), otherwise None is returned.
+      Returns the list of group members if the object is a group object, otherwise None is returned.
 
       :type: :class:`CListValue` of :class:`KX_GameObject` or None
 
    .. attribute:: groupObject
 
-      Returns the group object (dupli group instance) that the object belongs to or None if the object is not part of a group.
+      Returns the group object that the object belongs to or None if the object is not part of a group.
 
       :type: :class:`KX_GameObject` or None
 
-   .. attribute:: collisionGroup
-
-      The object's collision group.
-
-      :type: bitfield
-
-   .. attribute:: collisionMask
-
-      The object's collision mask.
-
-      :type: bitfield
-
    .. attribute:: collisionCallbacks
 
-      A list of functions to be called when a collision occurs.
+      A list of callables to be run when a collision occurs.
 
-      :type: list of functions and/or methods
-
-      Callbacks should either accept one argument `(object)`, or three
-      arguments `(object, point, normal)`. For simplicity, per
-      colliding object only the first collision point is reported.
-
-      .. code-block:: python
-
-        # Function form
-        def callback_three(object, point, normal):
-            print('Hit by %r at %s with normal %s' % (object.name, point, normal))
-
-        def callback_one(object):
-            print('Hit by %r' % object.name)
-
-        def register_callback(controller):
-            controller.owner.collisionCallbacks.append(callback_three)
-            controller.owner.collisionCallbacks.append(callback_one)
-
-
-        # Method form
-        class YourGameEntity(bge.types.KX_GameObject):
-            def __init__(self, old_owner):
-                self.collisionCallbacks.append(self.on_collision_three)
-                self.collisionCallbacks.append(self.on_collision_one)
-
-            def on_collision_three(self, object, point, normal):
-                print('Hit by %r at %s with normal %s' % (object.name, point, normal))
-
-            def on_collision_one(self, object):
-                print('Hit by %r' % object.name)
-
-      .. note::
-        For backward compatibility, a callback with variable number of
-        arguments (using `*args`) will be passed only the `object`
-        argument. Only when there is more than one fixed argument (not
-        counting `self` for methods) will the three-argument form be
-        used.
+      :type: list
 
    .. attribute:: scene
 
@@ -452,12 +374,6 @@ base class --- :class:`SCA_IObject`
       If true, the object's and children's debug properties will be displayed on screen.
 
       :type: boolean
-      
-   .. attribute:: currentLodLevel
-
-      The index of the level of detail (LOD) currently used by this object (read-only).
-
-      :type: int
 
    .. method:: endObject()
 
@@ -580,7 +496,7 @@ base class --- :class:`SCA_IObject`
          * True: you get the "local" velocity ie: relative to object orientation.
       :type local: boolean
       :return: the object's linear velocity.
-      :rtype: Vector((vx, vy, vz))
+      :rtype: list [vx, vy, vz]
 
    .. method:: setLinearVelocity(velocity, local=False)
 
@@ -607,7 +523,7 @@ base class --- :class:`SCA_IObject`
          * True: you get the "local" velocity ie: relative to object orientation.
       :type local: boolean
       :return: the object's angular velocity.
-      :rtype: Vector((vx, vy, vz))
+      :rtype: list [vx, vy, vz]
 
    .. method:: setAngularVelocity(velocity, local=False)
 
@@ -631,7 +547,7 @@ base class --- :class:`SCA_IObject`
       :arg point: optional point to return the velocity for, in local coordinates.
       :type point: 3D Vector
       :return: the velocity at the specified point.
-      :rtype: Vector((vx, vy, vz))
+      :rtype: list [vx, vy, vz]
 
    .. method:: getReactionForce()
 
@@ -641,7 +557,7 @@ base class --- :class:`SCA_IObject`
       This also includes impulses, eg from collisions.
 
       :return: the reaction force of this object.
-      :rtype: Vector((fx, fy, fz))
+      :rtype: list [fx, fy, fz]
 
       .. note::
 
@@ -664,28 +580,13 @@ base class --- :class:`SCA_IObject`
          * True: you get the "local" impulse ie: relative to local coordinates with object orientation.
       :type local: boolean
 
-   .. method:: setDamping(linear_damping, angular_damping)
-
-      Sets both the :py:attr:`linearDamping` and :py:attr:`angularDamping` simultaneously. This is more efficient than setting both properties individually.
-
-      :arg linear_damping: Linear ("translational") damping factor.
-      :type linear_damping: float ∈ [0, 1]
-      :arg angular_damping: Angular ("rotational") damping factor.
-      :type angular_damping: float ∈ [0, 1]
-
-   .. method:: suspendDynamics([ghost])
+   .. method:: suspendDynamics()
 
       Suspends physics for this object.
 
-      :arg ghost: When set to `True`, collisions with the object will be ignored, similar to the "ghost" checkbox in
-          Blender. When `False` (the default), the object becomes static but still collide with other objects.
-      :type ghost: bool
-
-      .. seealso:: :py:attr:`isSuspendDynamics` allows you to inspect whether the object is in a suspended state.
-
    .. method:: restoreDynamics()
 
-      Resumes physics for this object. Also reinstates collisions; the object will no longer be a ghost.
+      Resumes physics for this object.
 
       .. note::
 
@@ -975,4 +876,4 @@ base class --- :class:`SCA_IObject`
       :arg name: name of the property that added to the debug list.
       :type name: string
       :arg debug: the debug state.
-      :type debug: boolean
+      :type debug: boolean

doc/python_api/rst/bge_types/bge.types.KX_MouseFocusSensor.rst

@@ -64,20 +64,3 @@ base class --- :class:`SCA_MouseSensor`
 
       :type: boolean
 
-   .. attribute:: useXRay
-
-      If enabled it allows the sensor to see through game objects that don't have the selected property or material.
-
-     :type: boolean
-
-   .. attribute:: propName
-
-      The property or material the sensor is looking for.
-
-     :type: string
-
-   .. attribute:: useMaterial
-
-      Determines if the sensor is looking for a property or material. KX_True = Find material; KX_False = Find property.
-
-     :type: boolean

doc/python_api/rst/bge_types/bge.types.KX_ObjectActuator.rst

@@ -15,7 +15,7 @@ base class --- :class:`SCA_IActuator`
 
       The force applied by the actuator.
 
-      :type: Vector((x, y, z))
+      :type: list [x, y, z]
 
    .. attribute:: useLocalForce
 
@@ -27,7 +27,7 @@ base class --- :class:`SCA_IActuator`
 
       The torque applied by the actuator.
 
-      :type: Vector((x, y, z))
+      :type: list [x, y, z]
 
    .. attribute:: useLocalTorque
 
@@ -39,7 +39,7 @@ base class --- :class:`SCA_IActuator`
 
       The displacement vector applied by the actuator.
 
-      :type: Vector((x, y, z))
+      :type: list [x, y, z]
 
    .. attribute:: useLocalDLoc
 
@@ -51,7 +51,7 @@ base class --- :class:`SCA_IActuator`
 
       The angular displacement vector applied by the actuator
 
-      :type: Vector((x, y, z))
+      :type: list [x, y, z]
       
       .. note::
       
@@ -67,7 +67,7 @@ base class --- :class:`SCA_IActuator`
 
       The linear velocity applied by the actuator.
 
-      :type: Vector((x, y, z))
+      :type: list [x, y, z]
 
    .. attribute:: useLocalLinV
 
@@ -83,7 +83,7 @@ base class --- :class:`SCA_IActuator`
 
       The angular velocity applied by the actuator.
 
-      :type: Vector((x, y, z))
+      :type: list [x, y, z]
 
    .. attribute:: useLocalAngV
 

doc/python_api/rst/bge_types/bge.types.KX_Scene.rst

@@ -83,12 +83,6 @@ base class --- :class:`PyObjectPlus`
          
          This can be set directly from python to avoid using the :class:`KX_SceneActuator`.
 
-   .. attribute:: world
-
-      The current active world, (read-only).
-
-      :type: :class:`KX_WorldInfo`
-
    .. attribute:: suspended
 
       True if the scene is suspended, (read-only).
@@ -125,27 +119,21 @@ base class --- :class:`PyObjectPlus`
 
       :type: list
 
-   .. attribute:: pre_draw_setup
-
-      A list of callables to be run before the drawing setup (i.e., before the model view and projection matrices are computed).
-
-      :type: list
-
    .. attribute:: gravity
 
       The scene gravity using the world x, y and z axis.
 
-      :type: Vector((gx, gy, gz))
+      :type: list [fx, fy, fz]
 
-   .. method:: addObject(object, reference, time=0)
+   .. method:: addObject(object, other, time=0)
 
       Adds an object to the scene like the Add Object Actuator would.
 
-      :arg object: The (name of the) object to add.
+      :arg object: The object to add
       :type object: :class:`KX_GameObject` or string
-      :arg reference: The (name of the) object which position, orientation, and scale to copy (optional), if the object to add is a light and there is not reference the light's layer will be the same that the active layer in the blender scene.
-      :type reference: :class:`KX_GameObject` or string
-      :arg time: The lifetime of the added object, in frames. A time of 0 means the object will last forever (optional).
+      :arg other: The object's center to use when adding the object
+      :type other: :class:`KX_GameObject` or string
+      :arg time: The lifetime of the added object, in frames. A time of 0 means the object will last forever.
       :type time: integer
       :return: The newly added object.
       :rtype: :class:`KX_GameObject`
@@ -164,8 +152,6 @@ base class --- :class:`PyObjectPlus`
 
       :arg scene: The name of the scene to replace this scene with.
       :type scene: string
-      :return: True if the scene exists and was scheduled for addition, False otherwise.
-      :rtype: boolean
 
    .. method:: suspend()
 

doc/python_api/rst/bge_types/bge.types.KX_TrackToActuator.rst

@@ -37,25 +37,3 @@ base class --- :class:`SCA_IActuator`
 
       :type: boolean
 
-   .. attribute:: upAxis
-
-      The axis that points upward.
-
-      :type: integer from 0 to 2
-
-      * KX_TRACK_UPAXIS_POS_X
-      * KX_TRACK_UPAXIS_POS_Y
-      * KX_TRACK_UPAXIS_POS_Z
-
-   .. attribute:: trackAxis
-
-      The axis that points to the target object.
-
-      :type: integer from 0 to 5
-
-      * KX_TRACK_TRAXIS_POS_X
-      * KX_TRACK_TRAXIS_POS_Y
-      * KX_TRACK_TRAXIS_POS_Z
-      * KX_TRACK_TRAXIS_NEG_X
-      * KX_TRACK_TRAXIS_NEG_Y
-      * KX_TRACK_TRAXIS_NEG_Z

doc/python_api/rst/bge_types/bge.types.KX_VehicleWrapper.rst

@@ -11,25 +11,22 @@ base class --- :class:`PyObjectPlus`
 
    TODO - description
 
-   .. method:: addWheel(wheel, attachPos, downDir, axleDir, suspensionRestLength, wheelRadius, hasSteering)
+   .. method:: addWheel(wheel, attachPos, attachDir, axleDir, suspensionRestLength, wheelRadius, hasSteering)
 
       Add a wheel to the vehicle
 
       :arg wheel: The object to use as a wheel.
-      :type wheel: :class:`KX_GameObject` or a :class:`KX_GameObject` name
-      :arg attachPos: The position to attach the wheel, relative to the chassis object center.
+      :type wheel: :class:`KX_GameObject` or a KX_GameObject name
+      :arg attachPos: The position that this wheel will attach to.
       :type attachPos: vector of 3 floats
-      :arg downDir: The direction vector pointing down to where the vehicle should collide with the floor.
-      :type downDir: vector of 3 floats
-      :arg axleDir: The axis the wheel rotates around, relative to the chassis.
+      :arg attachDir: The direction this wheel points.
+      :type attachDir: vector of 3 floats
+      :arg axleDir: The direction of this wheels axle.
       :type axleDir: vector of 3 floats
-      :arg suspensionRestLength: The length of the suspension when no forces are being applied.
+      :arg suspensionRestLength: TODO - Description
       :type suspensionRestLength: float
-      :arg wheelRadius: The radius of the wheel (half the diameter).
+      :arg wheelRadius: The size of the wheel.
       :type wheelRadius: float
-      :arg hasSteering: True if the wheel should turn with steering, typically used in front wheels.
-      :type hasSteering: boolean
-
 
    .. method:: applyBraking(force, wheelIndex)
 
@@ -41,7 +38,6 @@ base class --- :class:`PyObjectPlus`
       :arg wheelIndex: index of the wheel where the force needs to be applied
       :type wheelIndex: integer
 
-
    .. method:: applyEngineForce(force, wheelIndex)
 
       Apply an engine force to the specified wheel
@@ -52,7 +48,6 @@ base class --- :class:`PyObjectPlus`
       :arg wheelIndex: index of the wheel where the force needs to be applied
       :type wheelIndex: integer
 
-
    .. method:: getConstraintId()
 
       Get the constraint ID

doc/python_api/rst/bge_types/bge.types.KX_VertexProxy.rst

@@ -17,25 +17,25 @@ base class --- :class:`SCA_IObject`
 
       The position of the vertex.
 
-      :type: Vector((x, y, z))
+      :type: list [x, y, z]
 
    .. attribute:: UV
 
       The texture coordinates of the vertex.
 
-      :type: Vector((u, v))
+      :type: list [u, v]
 
    .. attribute:: normal
 
       The normal of the vertex.
 
-      :type: Vector((nx, ny, nz))
+      :type: list [nx, ny, nz]
 
    .. attribute:: color
 
       The color of the vertex.
 
-      :type: Vector((r, g, b, a))
+      :type: list [r, g, b, a]
 
       Black = [0.0, 0.0, 0.0, 1.0], White = [1.0, 1.0, 1.0, 1.0]
 
@@ -110,13 +110,13 @@ base class --- :class:`SCA_IObject`
       Gets the position of this vertex.
 
       :return: this vertexes position in local coordinates.
-      :rtype: Vector((x, y, z))
+      :rtype: list [x, y, z]
 
    .. method:: setXYZ(pos)
 
       Sets the position of this vertex.
 
-      :type:  Vector((x, y, z))
+      :type:  list [x, y, z]
 
       :arg pos: the new position for this vertex in local coordinates.
 
@@ -125,26 +125,26 @@ base class --- :class:`SCA_IObject`
       Gets the UV (texture) coordinates of this vertex.
 
       :return: this vertexes UV (texture) coordinates.
-      :rtype: Vector((u, v))
+      :rtype: list [u, v]
 
    .. method:: setUV(uv)
 
       Sets the UV (texture) coordinates of this vertex.
 
-      :type:  Vector((u, v))
+      :type:  list [u, v]
 
    .. method:: getUV2()
 
       Gets the 2nd UV (texture) coordinates of this vertex.
 
       :return: this vertexes UV (texture) coordinates.
-      :rtype: Vector((u, v))
+      :rtype: list [u, v]
 
    .. method:: setUV2(uv, unit)
 
       Sets the 2nd UV (texture) coordinates of this vertex.
 
-      :type:  Vector((u, v))
+      :type:  list [u, v]
 
       :arg unit: optional argument, FLAT==1, SECOND_UV==2, defaults to SECOND_UV
       :arg unit:  integer
@@ -197,7 +197,7 @@ base class --- :class:`SCA_IObject`
       Gets the normal vector of this vertex.
 
       :return: normalized normal vector.
-      :rtype: Vector((nx, ny, nz))
+      :rtype: list [nx, ny, nz]
 
    .. method:: setNormal(normal)
 

doc/python_api/rst/bge_types/bge.types.KX_WorldInfo.rst

@@ -1,79 +0,0 @@
-KX_WordlInfo(PyObjectPlus)
-=============================
-
-.. module:: bge.types
-
-base class --- :class:`PyObjectPlus`
-
-.. class:: KX_WorldInfo(PyObjectPlus)
-
-   A wolrd object.
-
-   .. code-block:: python
-
-      # Set the mist color to red.
-      import bge
-
-      sce = bge.logic.getCurrentScene()
-
-      sce.world.mistColor = [1.0, 0.0, 0.0]
-
-   .. data:: KX_MIST_QUADRATIC
-
-      Type of quadratic attenuation used to fade mist.
-
-   .. data:: KX_MIST_LINEAR
-
-      Type of linear attenuation used to fade mist.
-
-   .. data:: KX_MIST_INV_QUADRATIC
-
-      Type of inverse quadratic attenuation used to fade mist.
-
-   .. attribute:: mistEnable
-
-      Return the state of the mist.
-
-      :type: bool
-
-   .. attribute:: mistStart
-
-      The mist start point.
-
-      :type: float
-
-   .. attribute:: mistDistance
-
-      The mist distance fom the start point to reach 100% mist.
-
-      :type: float
-
-   .. attribute:: mistIntensity
-
-      The mist intensity.
-
-      :type: float
-
-   .. attribute:: mistType
-
-      The type of mist - must be KX_MIST_QUADRATIC, KX_MIST_LINEAR or KX_MIST_INV_QUADRATIC
-
-   .. attribute:: mistColor
-
-      The color of the mist. Black = [0.0, 0.0, 0.0], White = [1.0, 1.0, 1.0].
-      Mist and background color sould always set to the same color.
-
-      :type: :class:`mathutils.Vector`
-
-   .. attribute:: backgroundColor
-
-      The color of the background. Black = [0.0, 0.0, 0.0], White = [1.0, 1.0, 1.0].
-      Mist and background color sould always set to the same color.
-
-      :type: :class:`mathutils.Vector`
-
-   .. attribute:: ambientColor
-
-      The color of the ambient light. Black = [0.0, 0.0, 0.0], White = [1.0, 1.0, 1.0].
-
-      :type: :class:`mathutils.Vector`

doc/python_api/rst/bge_types/bge.types.SCA_ISensor.rst

@@ -23,14 +23,8 @@ base class --- :class:`SCA_ILogicBrick`
 
    .. attribute:: frequency
 
-      The frequency for pulse mode sensors. (Deprecated: use SCA_ISensor.skippedTicks)
-
-      :type: integer
-
-   .. attribute:: skippedTicks
-
-      Number of logic ticks skipped between 2 active pulses
-
+      The frequency for pulse mode sensors.
+      
       :type: integer
 
    .. attribute:: level

doc/python_api/rst/bge_types/bge.types.SCA_PythonMouse.rst

@@ -25,7 +25,7 @@ base class --- :class:`PyObjectPlus`
 
       The normalized x and y position of the mouse cursor.
 
-      :type: tuple (x, y)
+      :type: list [x, y]
 
    .. attribute:: visible
 

doc/python_api/rst/bgl.rst

@@ -8,17 +8,19 @@ This module wraps OpenGL constants and functions, making them available from
 within Blender Python.
 
 The complete list can be retrieved from the module itself, by listing its
-contents: dir(bgl).  A simple search on the web can point to more
+contents: dir(bgl).  A simple search on the net can point to more
 than enough material to teach OpenGL programming, from books to many
 collections of tutorials.
 
-Here is a comprehensive `list of books <http://www.opengl.org/documentation/books/>`_ (non free). The `arcsynthesis tutorials  <http://www.arcsynthesis.org/gltut/>`_ is one of the best resources to learn modern OpenGL and `g-truc <http://www.g-truc.net/post-tech-content-sample.html>`_ offers a set of extensive examples, including advanced features.
-    
+The "red book": "I{OpenGL Programming Guide: The Official Guide to Learning
+OpenGL}" and the online NeHe tutorials are two of the best resources.
 
 .. note::
    You can use the :class:`Image` type to load and set textures.
    See :class:`Image.gl_load` and :class:`Image.gl_load`,
    for example.
+   `OpenGL.org <http://www.opengl.org>`_
+   `NeHe GameDev <http://nehe.gamedev.net>`_
 
 
 .. function:: glAccum(op, value):

doc/python_api/rst/info_gotcha.rst

@@ -86,15 +86,9 @@ Consider the calculations that might go into working out the object's final tran
 To avoid expensive recalculations every time a property is modified, Blender defers making the actual calculations until they are needed.
 
 However, while the script runs you may want to access the updated values.
-In this case you need to call :class:`bpy.types.Scene.update` after modifying values, for example:
 
-.. code-block:: python
+This can be done by calling :class:`bpy.types.Scene.update` after modifying values which recalculates all data that is tagged to be updated.
 
-   bpy.context.object.location = 1, 2, 3
-   bpy.context.scene.update()
-
-
-Now all dependent data (child objects, modifiers, drivers... etc) has been recalculated and is available to the script.
 
 Can I redraw during the script?
 -------------------------------
@@ -414,19 +408,17 @@ These returns the absolute path which can be used with native python modules.
 Unicode Problems
 ================
 
-Python supports many different encodings so there is nothing stopping you from
-writing a script in ``latin1`` or ``iso-8859-15``.
+Python supports many different encodings so there is nothing stopping you from writing a script in latin1 or iso-8859-15.
 
 See `pep-0263 <http://www.python.org/dev/peps/pep-0263/>`_
 
-However this complicates matters for Blender's Python API because ``.blend`` files don't have an explicit encoding.
+However this complicates things for the python api because blend files themselves don't have an encoding.
 
-To avoid the problem for Python integration and script authors we have decided all strings in blend files
-**must** be ``UTF-8``, ``ASCII`` compatible.
+To simplify the problem for python integration and script authors we have decided all strings in blend files **must** be UTF-8 or ASCII compatible.
 
 This means assigning strings with different encodings to an object names for instance will raise an error.
 
-Paths are an exception to this rule since we cannot ignore the existence of non ``UTF-8`` paths on users file-system.
+Paths are an exception to this rule since we cannot ignore the existane of non-utf-8 paths on peoples filesystems.
 
 This means seemingly harmless expressions can raise errors, eg.
 

doc/python_api/rst/info_quickstart.rst

@@ -11,22 +11,32 @@ This API is generally stable but some areas are still being added and improved.
 
 The Blender/Python API can do the following:
 
-- Edit any data the user interface can (Scenes, Meshes, Particles etc.)
-- Modify user preferences, keymaps and themes
-- Run tools with own settings
-- Create user interface elements such as menus, headers and panels
-- Create new tools
-- Create interactive tools
-- Create new rendering engines that integrate with Blender
-- Define new settings in existing Blender data
-- Draw in the 3D view using OpenGL commands from Python
+* Edit any data the user interface can (Scenes, Meshes, Particles etc.)
+
+* Modify user preferences, keymaps and themes
+
+* Run tools with own settings
+
+* Create user interface elements such as menus, headers and panels
+
+* Create new tools
+
+* Create interactive tools
+
+* Create new rendering engines that integrate with Blender
+
+* Define new settings in existing Blender data
+
+* Draw in the 3D view using OpenGL commands from Python
 
 
 The Blender/Python API **can't** (yet)...
 
-- Create new space types.
-- Assign custom properties to every type.
-- Define callbacks or listeners to be notified when data is changed.
+* Create new space types.
+
+* Assign custom properties to every type.
+
+* Define callbacks or listeners to be notified when data is changed.
 
 
 Before Starting
@@ -37,21 +47,23 @@ This document isn't intended to fully cover each topic. Rather, its purpose is t
 
 A quick list of helpful things to know before starting:
 
-- Blender uses Python 3.x; some online documentation still assumes 2.x.
-- The interactive console is great for testing one-liners, It also has autocompletion so you can inspect the API quickly.
-- Button tool tips show Python attributes and operator names.
-- Right clicking on buttons and menu items directly links to API documentation.
-- For more examples, the text menu has a templates section where some example operators can be found.
-- To examine further scripts distributed with Blender, see:
+* Blender uses Python 3.x; some 3rd party extensions are not available yet.
 
-  | ``~/.blender/scripts/startup/bl_ui`` for the user interface,
-  | ``~/.blender/scripts/startup/bl_op`` for operators.
+* The interactive console is great for testing one-liners, It also has autocompleation so you can inspect the api quickly.
+
+* Button tool tips show Python attributes and operator names.
+
+* Right clicking on buttons and menu items directly links to API documentation.
+
+* For more examples, the text menu has a templates section where some example operators can be found.
+
+* To examine further scripts distributed with Blender, see ``~/.blender/scripts/startup/bl_ui`` for the user interface and ``~/.blender/scripts/startup/bl_op`` for operators.
 
 
 Running Scripts
 ---------------
 
-The two most common ways to execute Python scripts are using the built-in text editor or entering commands in the Python console.
+The two most common ways to execute python scripts are using the built-in text editor or entering commands in the python console.
 
 Both the **Text Editor** and **Python Console** are space types you can select from the view header.
 
@@ -70,7 +82,7 @@ Key Concepts
 Data Access
 -----------
 
-Accessing DataBlocks
+Accessing datablocks
 ^^^^^^^^^^^^^^^^^^^^
 
 Python accesses Blender's data in the same way as the animation system and user interface; this implies that any setting that can be changed via a button can also be changed from Python.
@@ -104,7 +116,7 @@ Unlike Python's dictionaries, both methods are acceptable; however, the index of
    bpy.data.objects["Cube"]
 
 
-Accessing Attributes
+Accessing attributes
 ^^^^^^^^^^^^^^^^^^^^
 
 Once you have a data block, such as a material, object, groups etc., its attributes can be accessed much like you would change a setting using the graphical interface. In fact, the tooltip for each button also displays the Python attribute which can help in finding what settings to change in a script.
@@ -132,7 +144,7 @@ Example of a data path that can be quickly found via the console:
 Data Creation/Removal
 ^^^^^^^^^^^^^^^^^^^^^
 
-Those of you familiar with other Python API's may be surprised that new datablocks in the bpy API can't be created by calling the class:
+Those of you familiar with other python api's may be surprised that new datablocks in the bpy api can't be created by calling the class:
 
    >>> bpy.types.Mesh()
    Traceback (most recent call last):
@@ -141,9 +153,9 @@ Those of you familiar with other Python API's may be surprised that new databloc
 
 
 This is an intentional part of the API design.
-The Blender/Python API can't create Blender data that exists outside the main Blender database (accessed through :mod:`bpy.data`), because this data is managed by Blender (save/load/undo/append... etc).
+The blender/python api can't create blender data that exists outside the main blender database (accessed through bpy.data), because this data is managed by blender (save/load/undo/append... etc).
 
-Data is added and removed via methods on the collections in :mod:`bpy.data`, eg:
+Data is added and removed via methods on the collections in bpy.data, eg:
 
    >>> mesh = bpy.data.meshes.new(name="MyMesh")
    >>> print(mesh)
@@ -155,8 +167,7 @@ Data is added and removed via methods on the collections in :mod:`bpy.data`, eg:
 Custom Properties
 ^^^^^^^^^^^^^^^^^
 
-Python can access properties on any datablock that has an ID (data that can be linked in and accessed from :mod:`bpy.data`.
-When assigning a property, you can make up your own names, these will be created when needed or overwritten if they exist.
+Python can access properties on any datablock that has an ID (data that can be linked in and accessed from :mod:`bpy.data`. When assigning a property, you can make up your own names, these will be created when needed or overwritten if they exist.
 
 This data is saved with the blend file and copied with objects.
 
@@ -169,7 +180,7 @@ Example:
    if "SomeProp" in bpy.context.object:
        print("Property found")
 
-   # Use the get function like a Python dictionary
+   # Use the get function like a python dictionary
    # which can have a fallback value.
    value = bpy.data.scenes["Scene"].get("test_prop", "fallback value")
 
@@ -182,9 +193,11 @@ Example:
 
 Note that these properties can only be assigned  basic Python types.
 
-- int, float, string
-- array of ints/floats
-- dictionary (only string keys are supported, values must be basic types too)
+* int, float, string
+
+* array of ints/floats
+
+* dictionary (only string keys are supported, values must be basic types too)
 
 These properties are valid outside of Python. They can be animated by curves or used in driver paths.
 
@@ -192,8 +205,7 @@ These properties are valid outside of Python. They can be animated by curves or
 Context
 -------
 
-While it's useful to be able to access data directly by name or as a list, it's more common to operate on the user's selection.
-The context is always available from ``bpy.context`` and can be used to get the active object, scene, tool settings along with many other attributes.
+While it's useful to be able to access data directly by name or as a list, it's more common to operate on the user's selection. The context is always available from '''bpy.context''' and can be used to get the active object, scene, tool settings along with many other attributes.
 
 Common-use cases:
 
@@ -208,10 +220,9 @@ So ``bpy.context.object = obj`` will raise an error.
 But ``bpy.context.scene.objects.active = obj`` will work as expected.
 
 
-The context attributes change depending on where they are accessed.
-The 3D view has different context members than the console, so take care when accessing context attributes that the user state is known.
+The context attributes change depending on where they are accessed. The 3D view has different context members than the console, so take care when accessing context attributes that the user state is known.
 
-See :mod:`bpy.context` API reference.
+See :mod:`bpy.context` API reference
 
 
 Operators (Tools)
@@ -230,17 +241,15 @@ Examples:
 
 .. note::
 
-   The menu item: :menuselection:`Help --> Operator Cheat Sheet` gives a list of all operators and their default values in Python syntax, along with the generated docs.
-   This is a good way to get an overview of all Blender's operators.
+   The menu item: Help -> Operator Cheat Sheet" gives a list of all operators and their default values in Python syntax, along with the generated docs. This is a good way to get an overview of all blender's operators.
 
 
 Operator Poll()
 ^^^^^^^^^^^^^^^
 
-Many operators have a "poll" function which may check that the mouse is in a valid area or that the object is in the correct mode (Edit Mode, Weight Paint etc). 
-When an operator's poll function fails within Python, an exception is raised.
+Many operators have a "poll" function which may check that the mouse is a valid area or that the object is in the correct mode (Edit Mode, Weight Paint etc). When an operator's poll function fails within python, an exception is raised.
 
-For example, calling ``bpy.ops.view3d.render_border()`` from the console raises the following error:
+For example, calling bpy.ops.view3d.render_border() from the console raises the following error:
 
 .. code-block:: python
 
@@ -261,10 +270,13 @@ Integration
 
 Python scripts can integrate with Blender in the following ways:
 
-- By defining a rendering engine.
-- By defining operators.
-- By defining menus, headers and panels.
-- By inserting new buttons into existing menus, headers and panels
+* By defining a rendering engine.
+
+* By defining operators.
+
+* By defining menus, headers and panels.
+
+* By inserting new buttons into existing menus, headers and panels
 
 
 In Python, this is done by defining a class, which is a subclass of an existing type.
@@ -279,17 +291,24 @@ Once this script runs, ``SimpleOperator`` is registered with Blender and can be
 
 To run the script:
 
-#. Highlight the above code then press :kbd:`Ctrl-C` to copy it.
+#. Highlight the above code then press Ctrl+C to copy it.
+
 #. Start Blender
-#. Press :kbd:`Ctrl-Right` twice to change to the Scripting layout.
+
+#. Press Ctrl+Right twice to change to the Scripting layout.
+
 #. Click the button labeled ``New`` and the confirmation pop up in order to create a new text block.
-#. Press :kbd:`Ctrl-V` to paste the code into the text panel (the upper left frame).
+
+#. Press Ctrl+V to paste the code into the text panel (the upper left frame).
+
 #. Click on the button **Run Script**.
+
 #. Move your mouse into the 3D view, press spacebar for the operator search menu, and type "Simple".
+
 #. Click on the "Simple Operator" item found in search.
 
 
-.. seealso:: The class members with the ``bl_`` prefix are documented in the API
+.. seealso:: The class members with the **bl_** prefix are documented in the API
    reference :class:`bpy.types.Operator`
 
 .. note:: The output from the ``main`` function is sent to the terminal; in order to see this, be sure to :ref:`use the terminal <use_the_terminal>`.
@@ -297,25 +316,33 @@ To run the script:
 Example Panel
 -------------
 
-Panels register themselves as a class, like an operator. Notice the extra ``bl_`` variables used to set the context they display in.
+Panels register themselves as a class, like an operator. Notice the extra **bl_** variables used to set the context they display in.
 
 .. literalinclude:: ../../../release/scripts/templates_py/ui_panel_simple.py
 
 To run the script:
 
-#. Highlight the above code then press :kbd:`Ctrl-C` to copy it
+#. Highlight the above code then press Ctrl+C to copy it
+
 #. Start Blender
-#. Press :kbd:`Ctrl-Right` twice to change to the Scripting layout
+
+#. Press Ctrl+Right twice to change to the Scripting layout
+
 #. Click the button labeled ``New`` and the confirmation pop up in order to create a new text block.
-#. Press :kbd:`Ctrl-V` to paste the code into the text panel (the upper left frame)
+
+#. Press Ctrl+V to paste the code into the text panel (the upper left frame)
+
 #. Click on the button **Run Script**.
 
 
 To view the results:
 
 #. Select the the default cube.
+
 #. Click on the Object properties icon in the buttons panel (far right; appears as a tiny cube).
+
 #. Scroll down to see a panel named **Hello World Panel**.
+
 #. Changing the object name also updates **Hello World Panel's** Name: field.
 
 Note the row distribution and the label and properties that are available through the code.
@@ -334,14 +361,16 @@ Blender's Python API can be split up into 3 categories.
 Native Types
 ------------
 
-In simple cases returning a number or a string as a custom type would be cumbersome, so these are accessed as normal Python types.
+In simple cases returning a number or a string as a custom type would be cumbersome, so these are accessed as normal python types.
 
-- Blender float/int/boolean -> float/int/boolean
-- Blender enumerator -> string
+* blender float/int/boolean -> float/int/boolean
+
+* blender enumerator -> string
 
      >>> C.object.rotation_mode = 'AXIS_ANGLE'
 
-- Blender enumerator (multiple) -> set of strings
+
+* blender enumerator (multiple) -> set of strings
 
   .. code-block:: python
 
@@ -359,7 +388,7 @@ Used for Blender datablocks and collections: :class:`bpy.types.bpy_struct`
 
 For data that contains its own attributes groups/meshes/bones/scenes... etc.
 
-There are 2 main types that wrap Blenders data, one for datablocks (known internally as ``bpy_struct``), another for properties.
+There are 2 main types that wrap Blenders data, one for datablocks (known internally as bpy_struct), another for properties.
 
    >>> bpy.context.object
    bpy.data.objects['Cube']

doc/python_api/rst/info_tutorial_addon.rst

@@ -19,17 +19,21 @@ Prerequisites
 
 Before going through the tutorial you should...
 
-- Familiarity with the basics of working in Blender.
-- Know how to run a script in Blender's text editor (as documented in the quick-start)
-- Have an understanding of Python primitive types (int, boolean, string, list, tuple, dictionary, and set).
-- Be familiar with the concept of Python modules.
-- Basic understanding of classes (object orientation) in Python.
+* Familiarity with the basics of working in Blender.
+
+* Know how to run a script in Blender's text editor (as documented in the quick-start)
+
+* Have an understanding of Python primitive types (int, boolean, string, list, tuple, dictionary, and set).
+
+* Be familiar with the concept of Python modules.
+
+* Basic understanding of classes (object orientation) in Python.
 
 
 Suggested reading before starting this tutorial.
 
-- `Dive Into Python <http://getpython3.com/diveintopython3/index.html>`_ sections (1, 2, 3, 4, and 7).
-- :ref:`Blender API Quickstart <info_quickstart>`
+* `Dive Into Python <http://getpython3.com/diveintopython3/index.html>`_ sections (1, 2, 3, 4, and 7).
+* :ref:`Blender API Quickstart <info_quickstart>`
   to help become familiar with Blender/Python basics.
 
 
@@ -41,11 +45,13 @@ Documentation Links
 
 While going through the tutorial you may want to look into our reference documentation.
 
-- :ref:`Blender API Overview <info_overview>`. -
+* :ref:`Blender API Overview <info_overview>`. -
   *This document is rather detailed but helpful if you want to know more on a topic.*
-- :mod:`bpy.context` api reference. -
+
+* :mod:`bpy.context` api reference. -
   *Handy to have a list of available items your script may operate on.*
-- :class:`bpy.types.Operator`. -
+
+* :class:`bpy.types.Operator`. -
   *The following addons define operators, these docs give details and more examples of operators.*
 
 
@@ -72,11 +78,11 @@ To give an example, here is the simplest possible addon.
        print("Goodbye World")
 
 
-- ``bl_info`` is a dictionary containing addon meta-data such as the title, version and author to be displayed in the
+* ``bl_info`` is a dictionary containing addon meta-data such as the title, version and author to be displayed in the
   user preferences addon list.
-- ``register`` is a function which only runs when enabling the addon, this means the module can be loaded without
+* ``register`` is a function which only runs when enabling the addon, this means the module can be loaded without
   activating the addon.
-- ``unregister`` is a function to unload anything setup by ``register``, this is called when the addon is disabled.
+* ``unregister`` is a function to unload anything setup by ``register``, this is called when the addon is disabled.
 
 
 
@@ -178,15 +184,12 @@ This addon takes the body of the script above, and adds them to an operator's ``
        register()
 
 
-.. note::
+.. note:: ``bl_info`` is split across multiple lines, this is just a style convention used to more easily add items.
 
-   ``bl_info`` is split across multiple lines, this is just a style convention used to more easily add items.
-
-.. note::
-
-   Rather than using ``bpy.context.scene``, we use the ``context.scene`` argument passed to ``execute()``.
-   In most cases these will be the same however in some cases operators will be passed a custom context
-   so script authors should prefer the ``context`` argument passed to operators.
+.. note:: Rather than using ``bpy.context.scene``, we use the ``context.scene`` argument passed to ``execute()``.
+          In most cases these will be the same however in some cases operators will be passed a custom context
+          so script authors should prefer the ``context`` argument passed to operators.
+   
 
 To test the script you can copy and paste this into Blender text editor and run it, this will execute the script
 directly and call register immediately.
@@ -199,8 +202,8 @@ However running the script wont move any objects, for this you need to execute t
    :height: 574px
    :alt: Spacebar
 
-Do this by pressing :kbd:`Spacebar` to bring up the operator search dialog and type in
-"Move X by One" (the ``bl_label``), then :kbd:`Enter`.
+Do this by pressing ``SpaceBar`` to bring up the operator search dialog and type in "Move X by One" (the ``bl_label``),
+then press ``Enter``.
 
 
 
@@ -211,8 +214,8 @@ The objects should move as before.
 Install The Addon
 -----------------
 
-Once you have your addon within in Blender's text editor,
-you will want to be able to install it so it can be enabled in the user preferences to load on startup.
+Once you have your addon within in Blender's text editor, you will want to be able to install it so it can be enabled in
+the user preferences to load on startup.
 
 Even though the addon above is a test, lets go through the steps anyway so you know how to do it for later.
 
@@ -560,26 +563,20 @@ Bringing it all together
 
        # handle the keymap
        wm = bpy.context.window_manager
-       # Note that in background mode (no GUI available), keyconfigs are not available either, so we have to check this
-       # to avoid nasty errors in background case.
-       kc = wm.keyconfigs.addon
-       if kc:
-           km = wm.keyconfigs.addon.keymaps.new(name='Object Mode', space_type='EMPTY')
-           kmi = km.keymap_items.new(ObjectCursorArray.bl_idname, 'SPACE', 'PRESS', ctrl=True, shift=True)
-           kmi.properties.total = 4
-           addon_keymaps.append((km, kmi))
+       km = wm.keyconfigs.addon.keymaps.new(name='Object Mode', space_type='EMPTY')
+       kmi = km.keymap_items.new(ObjectCursorArray.bl_idname, 'SPACE', 'PRESS', ctrl=True, shift=True)
+       kmi.properties.total = 4
+       addon_keymaps.append((km, kmi))
 
    def unregister():
-       # Note: when unregistering, it's usually good practice to do it in reverse order you registered.
-       # Can avoid strange issues like keymap still referring to operators already unregistered...
+       bpy.utils.unregister_class(ObjectCursorArray)
+       bpy.types.VIEW3D_MT_object.remove(menu_func)
+
        # handle the keymap
        for km, kmi in addon_keymaps:
            km.keymap_items.remove(kmi)
        addon_keymaps.clear()
 
-       bpy.utils.unregister_class(ObjectCursorArray)
-       bpy.types.VIEW3D_MT_object.remove(menu_func)
-
 
    if __name__ == "__main__":
        register()
@@ -630,12 +627,15 @@ you want to see example code for, this is a good place to start.
 
 Here are some sites you might like to check on after completing this tutorial.
 
-- :ref:`Blender/Python API Overview <info_overview>` -
+* :ref:`Blender/Python API Overview <info_overview>` -
   *For more background details on Blender/Python integration.*
-- `How to Think Like a Computer Scientist <http://interactivepython.org/courselib/static/thinkcspy/index.html>`_ -
+
+* `How to Think Like a Computer Scientist <http://interactivepython.org/courselib/static/thinkcspy/index.html>`_ -
   *Great info for those who are still learning Python.*
-- `Blender Development (Wiki) <http://wiki.blender.org/index.php/Dev:Contents>`_ -
+
+* `Blender Development (Wiki) <http://wiki.blender.org/index.php/Dev:Contents>`_ -
   *Blender Development, general information and helpful links.*
-- `Blender Artists (Coding Section) <http://blenderartists.org/forum/forumdisplay.php?47-Coding>`_ -
+
+* `Blender Artists (Coding Section) <http://blenderartists.org/forum/forumdisplay.php?47-Coding>`_ -
   *forum where people ask Python development questions*
 

doc/python_api/rst_from_bmesh_opdefines.py

@@ -145,7 +145,6 @@ def main():
         "BMO_OPTYPE_FLAG_NORMALS_CALC",
         "BMO_OPTYPE_FLAG_UNTAN_MULTIRES",
         "BMO_OPTYPE_FLAG_SELECT_FLUSH",
-        "BMO_OPTYPE_FLAG_SELECT_VALIDATE",
         "BMO_OPTYPE_FLAG_NOP",
     )
     vars_dict = {}

doc/python_api/sphinx_changelog_gen.py

@@ -316,7 +316,7 @@ def main():
 
     try:
         import argparse
-    except ImportError:
+    except:
         print("Old Blender, just dumping")
         api_dump()
         return

doc/python_api/sphinx_doc_gen.py

@@ -1,22 +1,22 @@
-# ##### BEGIN GPL LICENSE BLOCK #####
-#
-#  This program is free software; you can redistribute it and/or
-#  modify it under the terms of the GNU General Public License
-#  as published by the Free Software Foundation; either version 2
-#  of the License, or (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software Foundation,
-#  Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributor(s): Campbell Barton
-#
-# ##### END GPL LICENSE BLOCK #####
+ # ***** BEGIN GPL LICENSE BLOCK *****
+ #
+ # This program is free software; you can redistribute it and/or
+ # modify it under the terms of the GNU General Public License
+ # as published by the Free Software Foundation; either version 2
+ # of the License, or (at your option) any later version.
+ #
+ # This program is distributed in the hope that it will be useful,
+ # but WITHOUT ANY WARRANTY; without even the implied warranty of
+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ # GNU General Public License for more details.
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software Foundation,
+ # Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ #
+ # Contributor(s): Campbell Barton, Luca Bonavita
+ #
+ # #**** END GPL LICENSE BLOCK #****
 
 # <pep8 compliant>
 
@@ -138,9 +138,19 @@ def handle_args():
     parser.add_argument("-T", "--sphinx-theme",
                         dest="sphinx_theme",
                         type=str,
-                        default="classic",
-                        help="Sphinx theme (default='classic'), "
-                        "see: http://sphinx-doc.org/theming.html",
+                        default='default',
+                        help=
+                        # see SPHINX_THEMES below
+                        "Sphinx theme (default='default')\n"
+                        "Available themes\n"
+                        "----------------\n"
+                        "(Blender Foundation) blender-org\n"    # naiad
+                        "(Sphinx) agogo, basic, epub, haiku, nature, "
+                        "scrolls, sphinxdoc, traditional\n",
+#                        choices=['naiad', 'blender-org'] +      # bf
+#                                ['agogo', 'basic', 'epub',
+#                                 'haiku', 'nature', 'scrolls',
+#                                 'sphinxdoc', 'traditional'],   # sphinx
                         required=False)
 
     parser.add_argument("-N", "--sphinx-named-output",
@@ -257,7 +267,6 @@ else:
         "bpy.props",
         "bpy.types",  # supports filtering
         "bpy.utils",
-        "bpy.utils.previews",
         "bpy_extras",
         "gpu",
         "mathutils",
@@ -265,12 +274,6 @@ else:
         "mathutils.kdtree",
         "mathutils.noise",
         "freestyle",
-        "freestyle.chainingiterators",
-        "freestyle.functions",
-        "freestyle.predicates",
-        "freestyle.shaders",
-        "freestyle.types",
-        "freestyle.utils",
         ]
 
     # ------
@@ -313,13 +316,7 @@ try:
     __import__("freestyle")
 except ImportError:
     BPY_LOGGER.debug("Warning: Built without 'freestyle' module, docs incomplete...")
-    EXCLUDE_MODULES = list(EXCLUDE_MODULES) + ["freestyle",
-                                               "freestyle.chainingiterators",
-                                               "freestyle.functions",
-                                               "freestyle.predicates",
-                                               "freestyle.shaders",
-                                               "freestyle.types",
-                                               "freestyle.utils"]
+    EXCLUDE_MODULES = list(EXCLUDE_MODULES) + ["freestyle"]
 
 # examples
 EXAMPLES_DIR = os.path.abspath(os.path.join(SCRIPT_DIR, "examples"))
@@ -410,7 +407,23 @@ BLENDER_ZIP_FILENAME = "%s.zip" % REFERENCE_NAME
 
 # -------------------------------SPHINX-----------------------------------------
 
-if ARGS.sphinx_theme == "blender-org":
+SPHINX_THEMES = {'bf': ['blender-org'],  # , 'naiad',
+                 'sphinx': ['agogo',
+                            'basic',
+                            'default',
+                            'epub',
+                            'haiku',
+                            'nature',
+                            'scrolls',
+                            'sphinxdoc',
+                            'traditional']}
+
+available_themes = SPHINX_THEMES['bf'] + SPHINX_THEMES['sphinx']
+if ARGS.sphinx_theme not in available_themes:
+    print("Please choose a theme among: %s" % ', '.join(available_themes))
+    sys.exit()
+
+if ARGS.sphinx_theme in SPHINX_THEMES['bf']:
     SPHINX_THEME_DIR = os.path.join(ARGS.output_dir, ARGS.sphinx_theme)
     SPHINX_THEME_SVN_DIR = os.path.join(SCRIPT_DIR, ARGS.sphinx_theme)
 
@@ -455,11 +468,9 @@ ClassMethodDescriptorType = type(dict.__dict__['fromkeys'])
 MethodDescriptorType = type(dict.get)
 GetSetDescriptorType = type(int.real)
 StaticMethodType = type(staticmethod(lambda: None))
-from types import (
-        MemberDescriptorType,
-        MethodType,
-        FunctionType,
-        )
+from types import (MemberDescriptorType,
+                   MethodType,
+                   )
 
 _BPY_STRUCT_FAKE = "bpy_struct"
 _BPY_PROP_COLLECTION_FAKE = "bpy_prop_collection"
@@ -636,26 +647,19 @@ def pyfunc2sphinx(ident, fw, module_name, type_name, identifier, py_func, is_cla
         func_type = "function"
 
         # ther rest are class methods
-    elif arg_str.startswith("(self, ") or arg_str == "(self)":
-        arg_str = "()" if (arg_str == "(self)") else ("(" + arg_str[7:])
+    elif arg_str.startswith("(self, "):
+        arg_str = "(" + arg_str[7:]
         func_type = "method"
     elif arg_str.startswith("(cls, "):
-        arg_str = "()" if (arg_str == "(cls)") else ("(" + arg_str[6:])
+        arg_str = "(" + arg_str[6:]
         func_type = "classmethod"
     else:
         func_type = "staticmethod"
 
-    doc = py_func.__doc__
-    if (not doc) or (not doc.startswith(".. %s:: " % func_type)):
-        fw(ident + ".. %s:: %s%s\n\n" % (func_type, identifier, arg_str))
-        ident_temp = ident + "   "
-    else:
-        ident_temp = ident
-
-    if doc:
-        write_indented_lines(ident_temp, fw, doc)
+    fw(ident + ".. %s:: %s%s\n\n" % (func_type, identifier, arg_str))
+    if py_func.__doc__:
+        write_indented_lines(ident + "   ", fw, py_func.__doc__)
         fw("\n")
-    del doc, ident_temp
 
     if is_class:
         write_example_ref(ident + "   ", fw, module_name + "." + type_name + "." + identifier)
@@ -679,7 +683,7 @@ def py_descr2sphinx(ident, fw, descr, module_name, type_name, identifier):
         fw(ident + ".. data:: %s\n\n" % identifier)
         write_indented_lines(ident + "   ", fw, doc, False)
         fw("\n")
-    elif type(descr) in {MethodDescriptorType, ClassMethodDescriptorType}:
+    elif type(descr) in (MethodDescriptorType, ClassMethodDescriptorType):
         write_indented_lines(ident, fw, doc, False)
         fw("\n")
     else:
@@ -871,9 +875,9 @@ def pymodule2sphinx(basepath, module_name, module, title):
     module_dir_value_type.sort(key=lambda triple: str(triple[2]))
 
     for attribute, value, value_type in module_dir_value_type:
-        if value_type == FunctionType:
+        if value_type == types.FunctionType:
             pyfunc2sphinx("", fw, module_name, None, attribute, value, is_class=False)
-        elif value_type in {types.BuiltinMethodType, types.BuiltinFunctionType}:  # both the same at the moment but to be future proof
+        elif value_type in (types.BuiltinMethodType, types.BuiltinFunctionType):  # both the same at the moment but to be future proof
             # note: can't get args from these, so dump the string as is
             # this means any module used like this must have fully formatted docstrings.
             py_c_func2sphinx("", fw, module_name, None, attribute, value, is_class=False)
@@ -921,29 +925,18 @@ def pymodule2sphinx(basepath, module_name, module, title):
                 fw(title_string(heading, heading_char))
 
         # May need to be its own function
+        fw(".. class:: %s\n\n" % type_name)
         if value.__doc__:
-            if value.__doc__.startswith(".. class::"):
-                fw(value.__doc__)
-            else:
-                fw(".. class:: %s\n\n" % type_name)
-                write_indented_lines("   ", fw, value.__doc__, True)
-        else:
-            fw(".. class:: %s\n\n" % type_name)
-        fw("\n")
-
+            write_indented_lines("   ", fw, value.__doc__, False)
+            fw("\n")
         write_example_ref("   ", fw, module_name + "." + type_name)
 
-        descr_items = [(key, descr) for key, descr in sorted(value.__dict__.items()) if not key.startswith("_")]
+        descr_items = [(key, descr) for key, descr in sorted(value.__dict__.items()) if not key.startswith("__")]
 
         for key, descr in descr_items:
             if type(descr) == ClassMethodDescriptorType:
                 py_descr2sphinx("   ", fw, descr, module_name, type_name, key)
 
-        # needed for pure python classes
-        for key, descr in descr_items:
-            if type(descr) == FunctionType:
-                pyfunc2sphinx("   ", fw, module_name, type_name, key, descr, is_class=True)
-
         for key, descr in descr_items:
             if type(descr) == MethodDescriptorType:
                 py_descr2sphinx("   ", fw, descr, module_name, type_name, key)
@@ -966,12 +959,10 @@ def pymodule2sphinx(basepath, module_name, module, title):
 context_type_map = {
     "active_base": ("ObjectBase", False),
     "active_bone": ("EditBone", False),
-    "active_gpencil_frame": ("GreasePencilLayer", True),
-    "active_gpencil_layer": ("GPencilLayer", True),
-    "active_node": ("Node", False),
     "active_object": ("Object", False),
     "active_operator": ("Operator", False),
     "active_pose_bone": ("PoseBone", False),
+    "active_node": ("Node", False),
     "armature": ("Armature", False),
     "bone": ("Bone", False),
     "brush": ("Brush", False),
@@ -987,11 +978,7 @@ context_type_map = {
     "edit_object": ("Object", False),
     "edit_text": ("Text", False),
     "editable_bones": ("EditBone", True),
-    "editable_gpencil_layers": ("GPencilLayer", True),
-    "editable_gpencil_strokes": ("GPencilStroke", True),
     "fluid": ("FluidSimulationModifier", False),
-    "gpencil_data": ("GreasePencel", False),
-    "gpencil_data_owner": ("ID", False),
     "image_paint_object": ("Object", False),
     "lamp": ("Lamp", False),
     "lattice": ("Lattice", False),
@@ -1031,7 +1018,6 @@ context_type_map = {
     "vertex_paint_object": ("Object", False),
     "visible_bases": ("ObjectBase", True),
     "visible_bones": ("EditBone", True),
-    "visible_gpencil_layers": ("GPencilLayer", True),
     "visible_objects": ("Object", True),
     "visible_pose_bones": ("PoseBone", True),
     "weight_paint_object": ("Object", False),
@@ -1254,7 +1240,6 @@ def pyrna2sphinx(basepath):
             fw("\n\n")
 
         subclass_ids = [s.identifier for s in structs.values() if s.base is struct if not rna_info.rna_id_ignore(s.identifier)]
-        subclass_ids.sort()
         if subclass_ids:
             fw("subclasses --- \n" + ", ".join((":class:`%s`" % s) for s in subclass_ids) + "\n\n")
 
@@ -1562,7 +1547,7 @@ def write_sphinx_conf_py(basepath):
     if ARGS.sphinx_theme != 'default':
         fw("html_theme = '%s'\n" % ARGS.sphinx_theme)
 
-    if ARGS.sphinx_theme == "blender-org":
+    if ARGS.sphinx_theme in SPHINX_THEMES['bf']:
         fw("html_theme_path = ['../']\n")
         # copied with the theme, exclude else we get an error [#28873]
         fw("html_favicon = 'favicon.ico'\n")    # in <theme>/static/
@@ -1623,7 +1608,6 @@ def write_rst_contents(basepath):
 
         # py modules
         "bpy.utils",
-        "bpy.utils.previews",
         "bpy.path",
         "bpy.app",
         "bpy.app.handlers",
@@ -1796,14 +1780,8 @@ def write_rst_importable_modules(basepath):
         "mathutils.geometry"   : "Geometry Utilities",
         "mathutils.kdtree"     : "KDTree Utilities",
         "mathutils.noise"      : "Noise Utilities",
-        "freestyle"            : "Freestyle Module",
-        "freestyle.types"      : "Freestyle Types",
-        "freestyle.predicates" : "Freestyle Predicates",
-        "freestyle.functions"  : "Freestyle Functions",
-        "freestyle.chainingiterators" : "Freestyle Chaining Iterators",
-        "freestyle.shaders"    : "Freestyle Shaders",
-        "freestyle.utils"      : "Freestyle Utilities",
-        }
+        "freestyle"            : "Freestyle Data Types & Operators",
+    }
     for mod_name, mod_descr in importable_modules.items():
         if mod_name not in EXCLUDE_MODULES:
             module = __import__(mod_name,
@@ -1874,8 +1852,8 @@ def rna2sphinx(basepath):
     # context
     if "bpy.context" not in EXCLUDE_MODULES:
         # one of a kind, context doc (uses ctypes to extract info!)
-        # doesn't work on mac and windows
-        if PLATFORM not in {"darwin", "windows"}:
+        # doesn't work on mac
+        if PLATFORM != "darwin":
             pycontext2sphinx(basepath)
 
     # internal modules
@@ -1978,7 +1956,7 @@ def main():
                         copy_function=shutil.copy)
 
         # eventually, copy the theme dir
-        if ARGS.sphinx_theme == "blender-org":
+        if ARGS.sphinx_theme in SPHINX_THEMES['bf']:
             if os.path.exists(SPHINX_THEME_DIR):
                 shutil.rmtree(SPHINX_THEME_DIR, True)
             shutil.copytree(SPHINX_THEME_SVN_DIR,