Merge branch 'master' into GPencil_Editing_Stage3

Damping factors make the eraser too hard to use in general cases, so leaving as-is.

.arcconfig

@@ -2,6 +2,5 @@
 	"project_id" : "Blender",
 	"conduit_uri" : "https://developer.blender.org/",
 	"git.default-relative-commit" : "origin/master",
-	"arc.land.update.default" : "rebase",
-	"arc.land.onto.default" : "master"
+	"arc.land.update.default" : "rebase"
 }

.clang-format

@@ -1,248 +0,0 @@
-
-# Configuration of clang-format
-# =============================
-#
-# Tested to work with versions: 6 to 8.
-
-# This causes parameters on continuations to align to the opening brace.
-#
-#   like_this_long_name(parameter_one,
-#                       parameter_two,
-#                       parameter_three);
-#
-AlignAfterOpenBracket: 'Align'
-
-# Disallow short functions on one line; break them up.
-AllowShortBlocksOnASingleLine: false
-
-# These two settings trigger stacking of parameters in most cases; this is
-# easier to read and also makes diffs easier to read (since an added or removed
-# parameter is obvious). For example, function calls will look like this:
-#
-#   like_this_long_name(parameter_one,
-#                       parameter_two,
-#                       parameter_three,
-#                       parameter_four,
-#                       parameter_five,
-#                       parameter_six);
-#
-# Instead of:
-#
-#   like_this_long_name(parameter_one, parameter_two, parameter_three, parameter_four,
-#                       parameter_five, parameter_six);
-#
-BinPackArguments: false
-BinPackParameters: false
-
-# Line width (don't exceed 100).
-ColumnLimit: 99
-
-# Cause initializer lists to have one member initialized per line, in the case
-# that all initializers can't fit on a single line.
-ConstructorInitializerAllOnOneLineOrOnePerLine: true
-
-# Indent the : after a constructor. For example:
-#
-#   explicit foo_class ()
-#       : member1_(5)
-#   {
-#   }
-#
-ConstructorInitializerIndentWidth: 4
-
-# Make access modifier slightly more visible.
-AccessModifierOffset: -1
-
-# This will unfortunately use spaces in some cases where it's not desired (like
-# function calls) but the overall result is better since it will allow
-# alignment to work properly with different tab width settings.
-ContinuationIndentWidth: 4
-
-# This tries to match Blender's style as much as possible. One
-BreakBeforeBraces: Custom
-BraceWrapping: {
-    AfterClass: 'false'
-    AfterControlStatement: 'false'
-    AfterEnum : 'false'
-    AfterFunction : 'true'
-    AfterNamespace : 'false'
-    AfterStruct : 'false'
-    AfterUnion : 'false'
-    BeforeCatch : 'true'
-    BeforeElse : 'true'
-    IndentBraces : 'false'
-    AfterObjCDeclaration: 'true'
-}
-
-# For switch statements, indent the cases.
-IndentCaseLabels: true
-
-# Indent after the hash inside preprocessor directives
-IndentPPDirectives: AfterHash
-
-BreakBeforeTernaryOperators: false
-
-SpaceAfterTemplateKeyword: false
-
-# Handy comment at the end of each C++ name space.
-FixNamespaceComments: true
-
-# Use "if (...)" instead of "if(...)", but have function calls like foo().
-SpaceBeforeParens: ControlStatements
-SpaceInEmptyParentheses: false
-
-# Use two spaces before trailing comments, for example
-#
-#   foo = bar;  // comment
-#
-# Note that this doesn't work for C-style comments.
-SpacesBeforeTrailingComments: 2
-
-# Reflow comments, developers must disable formatting as with code to override this.
-ReflowComments: true
-
-# Never use tabs for indentation.
-# Note: TabWidth and IndentWidth must be the same, or strange things happen.
-UseTab: Never
-TabWidth: 2
-IndentWidth: 2
-
-# Add a big penalty on breaking after the return type of functions. For example,
-#
-#   static void foo(...)
-#
-# Instead of:
-#
-#   static void
-#   foo(very long content here that maybe could be stacked)
-#
-PenaltyReturnTypeOnItsOwnLine: 10000
-
-# Avoid having function calls broken onto a new line:
-#
-#   int a = foo(
-#       long, list, of, many, params);
-#
-# Instead of:
-#
-#   int a =
-#       foo(long, list, of, many, params);
-#
-PenaltyBreakAssignment: 100
-
-AllowShortFunctionsOnASingleLine: None
-
-# Disable for now since it complicates initial migration tests,
-# TODO: look into enabling this in the future.
-SortIncludes: false
-
-# Don't right align escaped newlines to the right because we have a wide default
-AlignEscapedNewlines: DontAlign
-
-# Always break:
-#
-#   const char *foo =
-#       "multi"
-#       "line";
-#
-# Instead of:
-#
-#   const char *foo = "multi"
-#                     "line";
-#
-AlwaysBreakBeforeMultilineStrings: true
-
-# We don't want literal strings to break,
-# however clang-format seems to ignore this (sigh).
-PenaltyBreakString: 1000000
-
-# There are macros in Blender for custom for loops; tell Clang to treat them
-# like loops rather than an expression, and so put the { on the same line.
-#
-# To find these use multi-line regex search:
-# "^\s+[A-Z][A-Z0-9_]+\s*\([^\n]*\)\n\s*\{"
-ForEachMacros:
-  - BEGIN_ANIMFILTER_SUBCHANNELS
-  - BLI_FOREACH_SPARSE_RANGE
-  - BLI_SMALLSTACK_ITER_BEGIN
-  - BMO_ITER
-  - BMO_ITER_INDEX
-  - BMW_ITER
-  - BM_FACES_OF_VERT_ITER_BEGIN
-  - BM_ITER_BPY_BM_SEQ
-  - BM_ITER_ELEM
-  - BM_ITER_ELEM_INDEX
-  - BM_ITER_MESH
-  - BM_ITER_MESH_INDEX
-  - BM_ITER_MESH_MUTABLE
-  - BM_LOOPS_OF_VERT_ITER_BEGIN
-  - BOOST_FOREACH
-  - CTX_DATA_BEGIN
-  - CTX_DATA_BEGIN_WITH_ID
-  - DEG_OBJECT_ITER_BEGIN
-  - DEG_OBJECT_ITER_FOR_RENDER_ENGINE_BEGIN
-  - DRIVER_TARGETS_LOOPER_BEGIN
-  - DRIVER_TARGETS_USED_LOOPER_BEGIN
-  - FOREACH_BASE_IN_EDIT_MODE_BEGIN
-  - FOREACH_BASE_IN_MODE_BEGIN
-  - FOREACH_BEGIN
-  - FOREACH_COLLECTION_BEGIN
-  - FOREACH_COLLECTION_OBJECT_RECURSIVE_BEGIN
-  - FOREACH_COLLECTION_VISIBLE_OBJECT_RECURSIVE_BEGIN
-  - FOREACH_EDIT_OBJECT_BEGIN
-  - FOREACH_MAIN_ID_BEGIN
-  - FOREACH_MAIN_LISTBASE_BEGIN
-  - FOREACH_MAIN_LISTBASE_ID_BEGIN
-  - FOREACH_NODETREE_BEGIN
-  - FOREACH_OBJECT_BEGIN
-  - FOREACH_OBJECT_FLAG_BEGIN
-  - FOREACH_OBJECT_IN_EDIT_MODE_BEGIN
-  - FOREACH_OBJECT_IN_MODE_BEGIN
-  - FOREACH_OBJECT_RENDERABLE_BEGIN
-  - FOREACH_PCHAN_SELECTED_IN_OBJECT_BEGIN
-  - FOREACH_PCHAN_VISIBLE_IN_OBJECT_BEGIN
-  - FOREACH_SCENE_COLLECTION_BEGIN
-  - FOREACH_SCENE_OBJECT_BEGIN
-  - FOREACH_SELECTED_BASE_BEGIN
-  - FOREACH_SELECTED_EDITABLE_OBJECT_BEGIN
-  - FOREACH_SELECTED_OBJECT_BEGIN
-  - FOREACH_TRANS_DATA_CONTAINER
-  - FOREACH_VIEW_LAYER_TO_RENDER_BEGIN
-  - FOREACH_VISIBLE_BASE_BEGIN
-  - FOREACH_VISIBLE_OBJECT_BEGIN
-  - GHASH_FOREACH_BEGIN
-  - GHASH_ITER
-  - GHASH_ITER_INDEX
-  - GPU_SELECT_LOAD_IF_PICKSEL_LIST
-  - GP_EDITABLE_STROKES_BEGIN
-  - GSET_FOREACH_BEGIN
-  - GSET_ITER
-  - GSET_ITER_INDEX
-  - ITER_BEGIN
-  - ITER_PIXELS
-  - ITER_SLOTS
-  - LISTBASE_CIRCULAR_BACKWARD_BEGIN
-  - LISTBASE_CIRCULAR_FORWARD_BEGIN
-  - LISTBASE_FOREACH
-  - LISTBASE_FOREACH_MUTABLE
-  - MAN2D_ITER_AXES_BEGIN
-  - MAN_ITER_AXES_BEGIN
-  - NODE_INSTANCE_HASH_ITER
-  - NODE_SOCKET_TYPES_BEGIN
-  - NODE_TREE_TYPES_BEGIN
-  - NODE_TYPES_BEGIN
-  - PIXEL_LOOPER_BEGIN
-  - PIXEL_LOOPER_BEGIN_CHANNELS
-  - RNA_BEGIN
-  - RNA_PROP_BEGIN
-  - RNA_STRUCT_BEGIN
-  - RNA_STRUCT_BEGIN_SKIP_RNA_TYPE
-  - SEQP_BEGIN
-  - SEQ_BEGIN
-  - foreach
-
-# Use once we bump the minimum verison to version 8.
-# # Without this string literals that in-line 'STRINGIFY' behave strangely (a bug?).
-# StatementMacros:
-#   - PyObject_VAR_HEAD
-#   - STRINGIFY

.editorconfig

@@ -1,44 +0,0 @@
-# C/C++
-[*.{c,cc,h,hh,inl,glsl}]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 2
-max_line_length = 99
-
-# CMake & Text
-[*.{cmake,txt}]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 2
-max_line_length = 99
-
-# Python
-[*.py]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 4
-max_line_length = 120
-
-# Shell
-[*.sh]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 2
-max_line_length = 99
-
-# reStructuredText
-[*.rst]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 3
-max_line_length = 120

.gitignore

@@ -11,10 +11,6 @@ __pycache__/
 *.swo
 *#
 
-# Indexes for emacs, vi & others
-TAGS
-tags
-
 # QtCreator
 CMakeLists.txt.user
 
@@ -25,6 +21,7 @@ Desktop.ini
 
 # commonly used paths in blender
 /blender.bin
+/user-config.py
 /BUILD_NOTES.txt
 
 # local patches
@@ -36,7 +33,3 @@ Desktop.ini
 /doc/python_api/sphinx-in-tmp/
 /doc/python_api/sphinx-in/
 /doc/python_api/sphinx-out/
-/doc/python_api/rst/bmesh.ops.rst
-
-# in-source lib downloads
-/build_files/build_environment/downloads

.gitmodules

@@ -1,20 +1,16 @@
 [submodule "release/scripts/addons"]
 	path = release/scripts/addons
 	url = ../blender-addons.git
-	branch = master
 	ignore = all
 [submodule "release/scripts/addons_contrib"]
 	path = release/scripts/addons_contrib
 	url = ../blender-addons-contrib.git
-	branch = master
 	ignore = all
 [submodule "release/datafiles/locale"]
 	path = release/datafiles/locale
 	url = ../blender-translations.git
-	branch = master
 	ignore = all
-[submodule "source/tools"]
-	path = source/tools
-	url = ../blender-dev-tools.git
-	branch = master
+[submodule "scons"]
+	path = scons
+	url = ../scons.git
 	ignore = all

GNUmakefile

@@ -1,4 +1,4 @@
-# -*- mode: gnumakefile; tab-width: 4; indent-tabs-mode: t; -*-
+# -*- mode: gnumakefile; tab-width: 8; indent-tabs-mode: t; -*-
 # vim: tabstop=4
 #
 # ##### BEGIN GPL LICENSE BLOCK #####
@@ -24,138 +24,11 @@
 #   ../build_linux_i386
 # This is for users who like to configure & build blender with a single command.
 
-define HELP_TEXT
-
-Convenience Targets
-   Provided for building Blender, (multiple at once can be used).
-
-   * debug:         Build a debug binary.
-   * full:          Enable all supported dependencies & options.
-   * lite:          Disable non essential features for a smaller binary and faster build.
-   * headless:      Build without an interface (renderfarm or server automation).
-   * cycles:        Build Cycles standalone only, without Blender.
-   * bpy:           Build as a python module which can be loaded from python directly.
-   * deps:          Build library dependencies (intended only for platform maintainers).
-
-   * config:        Run cmake configuration tool to set build options.
-
-   Note: passing the argument 'BUILD_DIR=path' when calling make will override the default build dir.
-   Note: passing the argument 'BUILD_CMAKE_ARGS=args' lets you add cmake arguments.
-
-
-Project Files
-   Generate poject files for development environments.
-
-   * project_qtcreator:     QtCreator Project Files.
-   * project_netbeans:      NetBeans Project Files.
-   * project_eclipse:       Eclipse CDT4 Project Files.
-
-Package Targets
-
-   * package_debian:    Build a debian package.
-   * package_pacman:    Build an arch linux pacman package.
-   * package_archive:	Build an archive package.
-
-Testing Targets
-   Not associated with building Blender.
-
-   * test:
-     Run ctest, currently tests import/export,
-     operator execution and that python modules load
-   * test_cmake:
-     Runs our own cmake file checker
-     which detects errors in the cmake file list definitions
-   * test_pep8:
-     Checks all python script are pep8
-     which are tagged to use the stricter formatting
-   * test_deprecated:
-     Checks for deprecation tags in our code which may need to be removed
-   * test_style_c:
-     Checks C/C++ conforms with blenders style guide:
-     https://wiki.blender.org/wiki/Source/Code_Style
-   * test_style_c_qtc:
-     Same as test_style but outputs QtCreator tasks format
-   * test_style_osl:
-     Checks OpenShadingLanguage conforms with blenders style guide:
-     https://wiki.blender.org/wiki/Source/Code_Style
-   * test_style_osl_qtc:
-     Checks OpenShadingLanguage conforms with blenders style guide:
-     https://wiki.blender.org/wiki/Source/Code_Style
-
-Static Source Code Checking
-   Not associated with building Blender.
-
-   * check_cppcheck:        Run blender source through cppcheck (C & C++).
-   * check_clang_array:     Run blender source through clang array checking script (C & C++).
-   * check_splint:          Run blenders source through splint (C only).
-   * check_sparse:          Run blenders source through sparse (C only).
-   * check_smatch:          Run blenders source through smatch (C only).
-   * check_spelling_c:      Check for spelling errors (C/C++ only).
-   * check_spelling_c_qtc:  Same as check_spelling_c but outputs QtCreator tasks format.
-   * check_spelling_osl:    Check for spelling errors (OSL only).
-   * check_spelling_py:     Check for spelling errors (Python only).
-   * check_descriptions:    Check for duplicate/invalid descriptions.
-
-Utilities
-   Not associated with building Blender.
-
-   * icons:
-     Updates PNG icons from SVG files.
-
-     Optionally pass in variables: 'BLENDER_BIN', 'INKSCAPE_BIN'
-     otherwise default paths are used.
-
-     Example
-        make icons INKSCAPE_BIN=/path/to/inkscape
-
-   * icons_geom:
-     Updates Geometry icons from BLEND file.
-
-     Optionally pass in variable: 'BLENDER_BIN'
-     otherwise default paths are used.
-
-     Example
-        make icons_geom BLENDER_BIN=/path/to/blender
-
-   * tgz:
-     Create a compressed archive of the source code.
-
-   * update:
-     updates git and all submodules
-
-   * format
-     Format source code using clang (uses PATHS if passed in). For example::
-
-        make format PATHS="source/blender/blenlib source/blender/blenkernel"
-
-Environment Variables
-
-   * BUILD_CMAKE_ARGS:      Arguments passed to CMake.
-   * BUILD_DIR:             Override default build path.
-   * PYTHON:                Use this for the Python command (used for checking tools).
-   * NPROCS:                Number of processes to use building (auto-detect when omitted).
-
-Documentation Targets
-   Not associated with building Blender.
-
-   * doc_py:        Generate sphinx python api docs.
-   * doc_doxy:      Generate doxygen C/C++ docs.
-   * doc_dna:       Generate blender file format reference.
-   * doc_man:       Generate manpage.
-
-Information
-
-   * help:              This help message.
-   * help_features:     Show a list of optional features when building.
-
-endef
-# HELP_TEXT (end)
-
 
 # System Vars
 OS:=$(shell uname -s)
 OS_NCASE:=$(shell uname -s | tr '[A-Z]' '[a-z]')
-CPU:=$(shell uname -m)
+# CPU:=$(shell uname -m)  # UNUSED
 
 
 # Source and Build DIR's
@@ -170,22 +43,6 @@ ifndef BUILD_DIR
 	BUILD_DIR:=$(shell dirname "$(BLENDER_DIR)")/build_$(OS_NCASE)
 endif
 
-# Dependencies DIR's
-DEPS_SOURCE_DIR:=$(BLENDER_DIR)/build_files/build_environment
-
-ifndef DEPS_BUILD_DIR
-	DEPS_BUILD_DIR:=$(BUILD_DIR)/deps
-endif
-
-ifndef DEPS_INSTALL_DIR
-	DEPS_INSTALL_DIR:=$(shell dirname "$(BLENDER_DIR)")/lib/$(OS_NCASE)
-
-	ifneq ($(OS_NCASE),darwin)
-		# Add processor type to directory name
-		DEPS_INSTALL_DIR:=$(DEPS_INSTALL_DIR)_$(CPU)
-	endif
-endif
-
 # Allow to use alternative binary (pypy3, etc)
 ifndef PYTHON
 	PYTHON:=python3
@@ -222,18 +79,6 @@ ifneq "$(findstring bpy, $(MAKECMDGOALS))" ""
 endif
 
 
-# -----------------------------------------------------------------------------
-# Blender binary path
-
-# Allow passing in own BLENDER_BIN so developers who don't
-# use the default build path can still use utility helpers.
-ifeq ($(OS), Darwin)
-	BLENDER_BIN?="$(BUILD_DIR)/bin/Blender.app/Contents/MacOS/Blender"
-else
-	BLENDER_BIN?="$(BUILD_DIR)/bin/blender"
-endif
-
-
 # -----------------------------------------------------------------------------
 # Get the number of cores for threaded build
 ifndef NPROCS
@@ -241,8 +86,14 @@ ifndef NPROCS
 	ifeq ($(OS), Linux)
 		NPROCS:=$(shell nproc)
 	endif
-	ifneq (,$(filter $(OS),Darwin FreeBSD NetBSD))
-		NPROCS:=$(shell sysctl -n hw.ncpu)
+	ifeq ($(OS), Darwin)
+		NPROCS:=$(shell sysctl -a | grep "hw.ncpu" | cut -d" " -f3)
+	endif
+	ifeq ($(OS), FreeBSD)
+		NPROCS:=$(shell sysctl -a | grep "hw.ncpu" | cut -d" " -f2 )
+	endif
+	ifeq ($(OS), NetBSD)
+		NPROCS:=$(shell sysctl -a | grep "hw.ncpu" | cut -d" " -f2 )
 	endif
 endif
 
@@ -253,7 +104,7 @@ endif
 CMAKE_CONFIG = cmake $(BUILD_CMAKE_ARGS) \
                      -H"$(BLENDER_DIR)" \
                      -B"$(BUILD_DIR)" \
-                     -DCMAKE_BUILD_TYPE_INIT:STRING=$(BUILD_TYPE)
+                     -DCMAKE_BUILD_TYPE:STRING=$(BUILD_TYPE)
 
 
 # -----------------------------------------------------------------------------
@@ -262,21 +113,21 @@ CMAKE_CONFIG = cmake $(BUILD_CMAKE_ARGS) \
 # X11 spesific
 ifdef DISPLAY
 	CMAKE_CONFIG_TOOL = cmake-gui
-else
+else 
 	CMAKE_CONFIG_TOOL = ccmake
 endif
 
 
 # -----------------------------------------------------------------------------
 # Build Blender
-all: .FORCE
+all: FORCE
 	@echo
 	@echo Configuring Blender in \"$(BUILD_DIR)\" ...
 
 #	# if test ! -f $(BUILD_DIR)/CMakeCache.txt ; then \
 #	# 	$(CMAKE_CONFIG); \
 #	# fi
-
+	
 #	# do this always incase of failed initial build, could be smarter here...
 	@$(CMAKE_CONFIG)
 
@@ -285,7 +136,7 @@ all: .FORCE
 	$(MAKE) -C "$(BUILD_DIR)" -s -j $(NPROCS) install
 	@echo
 	@echo edit build configuration with: "$(BUILD_DIR)/CMakeCache.txt" run make again to rebuild.
-	@echo Blender successfully built, run from: $(BLENDER_BIN)
+	@echo blender installed, run from: "$(BUILD_DIR)/bin/blender"
 	@echo
 
 debug: all
@@ -295,50 +146,95 @@ cycles: all
 headless: all
 bpy: all
 
-# -----------------------------------------------------------------------------
-# Build dependencies
-DEPS_TARGET = install
-ifneq "$(findstring clean, $(MAKECMDGOALS))" ""
-	DEPS_TARGET = clean
-endif
-
-deps: .FORCE
-	@echo
-	@echo Configuring dependencies in \"$(DEPS_BUILD_DIR)\"
-
-	@cmake -H"$(DEPS_SOURCE_DIR)" \
-	       -B"$(DEPS_BUILD_DIR)" \
-		   -DHARVEST_TARGET=$(DEPS_INSTALL_DIR)
-
-	@echo
-	@echo Building dependencies ...
-	$(MAKE) -C "$(DEPS_BUILD_DIR)" -s -j $(NPROCS) $(DEPS_TARGET)
-	@echo
-	@echo Dependencies successfully built and installed to $(DEPS_INSTALL_DIR).
-	@echo
 
 # -----------------------------------------------------------------------------
 # Configuration (save some cd'ing around)
-config: .FORCE
+config: FORCE
 	$(CMAKE_CONFIG_TOOL) "$(BUILD_DIR)"
 
 
 # -----------------------------------------------------------------------------
 # Help for build targets
-export HELP_TEXT
-help: .FORCE
-	@echo "$$HELP_TEXT"
+help: FORCE
+	@echo ""
+	@echo "Convenience targets provided for building blender, (multiple at once can be used)"
+	@echo "  * debug     - build a debug binary"
+	@echo "  * full      - enable all supported dependencies & options"
+	@echo "  * lite      - disable non essential features for a smaller binary and faster build"
+	@echo "  * headless  - build without an interface (renderfarm or server automation)"
+	@echo "  * cycles    - build Cycles standalone only, without Blender"
+	@echo "  * bpy       - build as a python module which can be loaded from python directly"
+	@echo ""
+	@echo "  * config    - run cmake configuration tool to set build options"
+	@echo ""
+	@echo "  Note, passing the argument 'BUILD_DIR=path' when calling make will override the default build dir."
+	@echo "  Note, passing the argument 'BUILD_CMAKE_ARGS=args' lets you add cmake arguments."
+	@echo ""
+	@echo ""
+	@echo "Project Files for IDE's"
+	@echo "  * project_qtcreator - QtCreator Project Files"
+	@echo "  * project_netbeans  - NetBeans Project Files"
+	@echo "  * project_eclipse   - Eclipse CDT4 Project Files"
+	@echo ""
+	@echo "Package Targets"
+	@echo "  * package_debian  - build a debian package"
+	@echo "  * package_pacman  - build an arch linux pacman package"
+	@echo "  * package_archive - build an archive package"
+	@echo ""
+	@echo "Testing Targets (not associated with building blender)"
+	@echo "  * test               - run ctest, currently tests import/export, operator execution and that python modules load"
+	@echo "  * test_cmake         - runs our own cmake file checker which detects errors in the cmake file list definitions"
+	@echo "  * test_pep8          - checks all python script are pep8 which are tagged to use the stricter formatting"
+	@echo "  * test_deprecated    - checks for deprecation tags in our code which may need to be removed"
+	@echo "  * test_style_c       - checks C/C++ conforms with blenders style guide: http://wiki.blender.org/index.php/Dev:Doc/CodeStyle"
+	@echo "  * test_style_c_qtc   - same as test_style but outputs QtCreator tasks format"
+	@echo "  * test_style_osl     - checks OpenShadingLanguage conforms with blenders style guide: http://wiki.blender.org/index.php/Dev:Doc/CodeStyle"
+	@echo "  * test_style_osl_qtc - checks OpenShadingLanguage conforms with blenders style guide: http://wiki.blender.org/index.php/Dev:Doc/CodeStyle"
+	@echo ""
+	@echo "Static Source Code Checking (not associated with building blender)"
+	@echo "  * check_cppcheck       - run blender source through cppcheck (C & C++)"
+	@echo "  * check_clang_array    - run blender source through clang array checking script (C & C++)"
+	@echo "  * check_splint         - run blenders source through splint (C only)"
+	@echo "  * check_sparse         - run blenders source through sparse (C only)"
+	@echo "  * check_smatch         - run blenders source through smatch (C only)"
+	@echo "  * check_spelling_c     - check for spelling errors (C/C++ only)"
+	@echo "  * check_spelling_c_qtc - same as check_spelling_c but outputs QtCreator tasks format"
+	@echo "  * check_spelling_osl   - check for spelling errors (OSL only)"
+	@echo "  * check_spelling_py    - check for spelling errors (Python only)"
+	@echo "  * check_descriptions   - check for duplicate/invalid descriptions"
+	@echo ""
+	@echo "Utilities (not associated with building blender)"
+	@echo "  * icons    - updates PNG icons from SVG files."
+	@echo "  * tgz      - create a compressed archive of the source code."
+	@echo "  * update   - updates git and all submodules"
+	@echo ""
+	@echo "Environment Variables"
+	@echo "  * BUILD_CMAKE_ARGS    - arguments passed to CMake."
+	@echo "  * BUILD_DIR           - override default build path."
+	@echo "  * PYTHON              - use this for the Python command (used for checking tools)."
+	@echo "  * NPROCS              - number of processes to use building (auto-detect when omitted)."
+	@echo ""
+	@echo "Documentation Targets (not associated with building blender)"
+	@echo "  * doc_py   - generate sphinx python api docs"
+	@echo "  * doc_doxy - generate doxygen C/C++ docs"
+	@echo "  * doc_dna  - generate blender file format reference"
+	@echo "  * doc_man  - generate manpage"
+	@echo ""
+	@echo "Information"
+	@echo "  * help          - this help message"
+	@echo "  * help_features - show a list of optional features when building"
+	@echo ""
 
 # -----------------------------------------------------------------------------
 # Packages
 #
-package_debian: .FORCE
+package_debian: FORCE
 	cd build_files/package_spec ; DEB_BUILD_OPTIONS="parallel=$(NPROCS)" sh ./build_debian.sh
 
-package_pacman: .FORCE
+package_pacman: FORCE
 	cd build_files/package_spec/pacman ; MAKEFLAGS="-j$(NPROCS)" makepkg
 
-package_archive: .FORCE
+package_archive: FORCE
 	make -C "$(BUILD_DIR)" -s package_archive
 	@echo archive in "$(BUILD_DIR)/release"
 
@@ -346,24 +242,24 @@ package_archive: .FORCE
 # -----------------------------------------------------------------------------
 # Tests
 #
-test: .FORCE
+test: FORCE
 	cd $(BUILD_DIR) ; ctest . --output-on-failure
 
 # run pep8 check check on scripts we distribute.
-test_pep8: .FORCE
+test_pep8: FORCE
 	$(PYTHON) tests/python/pep8.py > test_pep8.log 2>&1
 	@echo "written: test_pep8.log"
 
 # run some checks on our cmakefiles.
-test_cmake: .FORCE
+test_cmake: FORCE
 	$(PYTHON) build_files/cmake/cmake_consistency_check.py > test_cmake_consistency.log 2>&1
 	@echo "written: test_cmake_consistency.log"
 
 # run deprecation tests, see if we have anything to remove.
-test_deprecated: .FORCE
+test_deprecated: FORCE
 	$(PYTHON) tests/check_deprecated.py
 
-test_style_c: .FORCE
+test_style_c: FORCE
 	# run our own checks on C/C++ style
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
@@ -371,7 +267,7 @@ test_style_c: .FORCE
 	    "$(BLENDER_DIR)/source/creator" \
 	    --no-length-check
 
-test_style_c_qtc: .FORCE
+test_style_c_qtc: FORCE
 	# run our own checks on C/C++ style
 	USE_QTC_TASK=1 \
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
@@ -384,7 +280,7 @@ test_style_c_qtc: .FORCE
 	@echo "written: test_style.tasks"
 
 
-test_style_osl: .FORCE
+test_style_osl: FORCE
 	# run our own checks on C/C++ style
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
@@ -392,7 +288,7 @@ test_style_osl: .FORCE
 	    "$(BLENDER_DIR)/release/scripts/templates_osl"
 
 
-test_style_osl_qtc: .FORCE
+test_style_osl_qtc: FORCE
 	# run our own checks on C/C++ style
 	USE_QTC_TASK=1 \
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
@@ -407,13 +303,13 @@ test_style_osl_qtc: .FORCE
 # Project Files
 #
 
-project_qtcreator: .FORCE
-	$(PYTHON) build_files/cmake/cmake_qtcreator_project.py --build-dir "$(BUILD_DIR)"
+project_qtcreator: FORCE
+	$(PYTHON) build_files/cmake/cmake_qtcreator_project.py "$(BUILD_DIR)"
 
-project_netbeans: .FORCE
+project_netbeans: FORCE
 	$(PYTHON) build_files/cmake/cmake_netbeans_project.py "$(BUILD_DIR)"
 
-project_eclipse: .FORCE
+project_eclipse: FORCE
 	cmake -G"Eclipse CDT4 - Unix Makefiles" -H"$(BLENDER_DIR)" -B"$(BUILD_DIR)"
 
 
@@ -421,40 +317,40 @@ project_eclipse: .FORCE
 # Static Checking
 #
 
-check_cppcheck: .FORCE
+check_cppcheck: FORCE
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_cppcheck.py" 2> \
 	    "$(BLENDER_DIR)/check_cppcheck.txt"
 	@echo "written: check_cppcheck.txt"
 
-check_clang_array: .FORCE
+check_clang_array: FORCE
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_clang_array.py"
 
-check_splint: .FORCE
+check_splint: FORCE
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_splint.py"
 
-check_sparse: .FORCE
+check_sparse: FORCE
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_sparse.py"
 
-check_smatch: .FORCE
+check_smatch: FORCE
 	$(CMAKE_CONFIG)
 	cd "$(BUILD_DIR)" ; \
 	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_smatch.py"
 
-check_spelling_py: .FORCE
+check_spelling_py: FORCE
 	cd "$(BUILD_DIR)" ; \
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
 	    "$(BLENDER_DIR)/release/scripts"
 
-check_spelling_c: .FORCE
+check_spelling_c: FORCE
 	cd "$(BUILD_DIR)" ; \
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
@@ -463,7 +359,7 @@ check_spelling_c: .FORCE
 	    "$(BLENDER_DIR)/intern/guardedalloc" \
 	    "$(BLENDER_DIR)/intern/ghost" \
 
-check_spelling_c_qtc: .FORCE
+check_spelling_c_qtc: FORCE
 	cd "$(BUILD_DIR)" ; USE_QTC_TASK=1 \
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
@@ -474,82 +370,70 @@ check_spelling_c_qtc: .FORCE
 	    > \
 	    "$(BLENDER_DIR)/check_spelling_c.tasks"
 
-check_spelling_osl: .FORCE
+check_spelling_osl: FORCE
 	cd "$(BUILD_DIR)" ;\
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
 	    "$(BLENDER_DIR)/intern/cycles/kernel/shaders"
 
-check_descriptions: .FORCE
-	$(BLENDER_BIN) --background -noaudio --factory-startup --python \
+check_descriptions: FORCE
+	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup --python \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_descriptions.py"
 
 # -----------------------------------------------------------------------------
 # Utilities
 #
 
-tgz: .FORCE
+tgz: FORCE
 	./build_files/utils/build_tgz.sh
 
-INKSCAPE_BIN?="inkscape"
-icons: .FORCE
-	BLENDER_BIN=$(BLENDER_BIN) INKSCAPE_BIN=$(INKSCAPE_BIN) \
-		"$(BLENDER_DIR)/release/datafiles/blender_icons_update.py"
-	BLENDER_BIN=$(BLENDER_BIN) INKSCAPE_BIN=$(INKSCAPE_BIN) \
-		"$(BLENDER_DIR)/release/datafiles/prvicons_update.py"
+icons: FORCE
+	"$(BLENDER_DIR)/release/datafiles/blender_icons_update.py"
+	"$(BLENDER_DIR)/release/datafiles/prvicons_update.py"
 
-icons_geom: .FORCE
-	BLENDER_BIN=$(BLENDER_BIN) \
-	    "$(BLENDER_DIR)/release/datafiles/blender_icons_geom_update.py"
-
-update: .FORCE
-	if [ "$(OS_NCASE)" = "darwin" ] && [ ! -d "../lib/$(OS_NCASE)" ]; then \
-		svn checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/$(OS_NCASE) ../lib/$(OS_NCASE) ; \
-	fi
+update: FORCE
 	if [ -d "../lib" ]; then \
-		svn cleanup ../lib/* ; \
 		svn update ../lib/* ; \
 	fi
 	git pull --rebase
-	git submodule update --init --recursive
-	git submodule foreach git checkout master
 	git submodule foreach git pull --rebase origin master
 
-format: .FORCE
-	PATH="../lib/${OS_NCASE}/llvm/bin/:$(PATH)" \
-		python3 source/tools/utils_maintenance/clang_format_paths.py $(PATHS)
-
 
 # -----------------------------------------------------------------------------
 # Documentation
 #
 
 # Simple version of ./doc/python_api/sphinx_doc_gen.sh with no PDF generation.
-doc_py: .FORCE
-	ASAN_OPTIONS=halt_on_error=0 \
-	$(BLENDER_BIN) --background -noaudio --factory-startup \
-		--python doc/python_api/sphinx_doc_gen.py
+doc_py: FORCE
+	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup --python doc/python_api/sphinx_doc_gen.py
 	cd doc/python_api ; sphinx-build -b html sphinx-in sphinx-out
-	@echo "docs written into: '$(BLENDER_DIR)/doc/python_api/sphinx-out/index.html'"
+	@echo "docs written into: '$(BLENDER_DIR)/doc/python_api/sphinx-out/contents.html'"
 
-doc_doxy: .FORCE
+doc_doxy: FORCE
 	cd doc/doxygen; doxygen Doxyfile
 	@echo "docs written into: '$(BLENDER_DIR)/doc/doxygen/html/index.html'"
 
-doc_dna: .FORCE
-	$(BLENDER_BIN) --background -noaudio --factory-startup \
-		--python doc/blender_file_format/BlendFileDnaExporter_25.py
+doc_dna: FORCE
+	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup --python doc/blender_file_format/BlendFileDnaExporter_25.py
 	@echo "docs written into: '$(BLENDER_DIR)/doc/blender_file_format/dna.html'"
 
-doc_man: .FORCE
-	$(PYTHON) doc/manpage/blender.1.py $(BLENDER_BIN) blender.1
+doc_man: FORCE
+	$(PYTHON) doc/manpage/blender.1.py "$(BUILD_DIR)/bin/blender"
 
-help_features: .FORCE
-	@$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_print_build_options.py" $(BLENDER_DIR)"/CMakeLists.txt"
+help_features: FORCE
+	@$(PYTHON) -c \
+		"import re; \
+		print('\n'.join([ \
+		w for l in open('"$(BLENDER_DIR)"/CMakeLists.txt', 'r').readlines() \
+		if not l.lstrip().startswith('#') \
+		for w in (re.sub(\
+		    r'.*\boption\s*\(\s*(WITH_[a-zA-Z0-9_]+)\s+(\".*\")\s*.*', r'\g<1> - \g<2>', l).strip('() \n'),) \
+		if w.startswith('WITH_')]))" | uniq
 
-clean: .FORCE
+
+clean: FORCE
 	$(MAKE) -C "$(BUILD_DIR)" clean
 
 .PHONY: all
 
-.FORCE:
+FORCE:

build_files/build_environment/CMakeLists.txt

@@ -1,158 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-####################################################################################################
-#
-# This is a build system used by platform maintainers to build library dependencies on
-# Windows, macOS and Linux.
-#
-# For users building Blender, we recommend using the precompiled libraries from lib/ on
-# Windows and macOS, and install_deps.sh on Linux.
-#
-# WINDOWS USAGE:
-#   Don't call this cmake file yourself, use build_deps.cmd
-#   build_deps 2013 x64 / build_deps 2013 x86
-#   build_deps 2015 x64 / build_deps 2015 x86
-#
-# MAC OS X USAGE:
-#   Install with homebrew: brew install cmake autoconf automake libtool yasm nasm
-#   Run "make deps" from main Blender directory
-#
-# LINUX USAGE:
-#   Install compiler cmake autoconf automake libtool yasm nasm tcl
-#   Run "make deps" from main Blender directory
-#
-####################################################################################################
-
-project("BlenderDependencies")
-cmake_minimum_required(VERSION 3.5)
-
-include(ExternalProject)
-include(cmake/options.cmake)
-include(cmake/versions.cmake)
-
-if(ENABLE_MINGW64)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    include(cmake/setup_mingw64.cmake)
-  else()
-    include(cmake/setup_mingw32.cmake)
-  endif()
-else()
-  set(mingw_LIBDIR ${LIBDIR})
-endif()
-
-include(cmake/zlib.cmake)
-include(cmake/blendthumb.cmake)
-include(cmake/openal.cmake)
-include(cmake/png.cmake)
-include(cmake/jpeg.cmake)
-include(cmake/boost.cmake)
-include(cmake/blosc.cmake)
-include(cmake/pthreads.cmake)
-include(cmake/ilmbase.cmake)
-include(cmake/openexr.cmake)
-include(cmake/freetype.cmake)
-include(cmake/freeglut.cmake)
-include(cmake/glew.cmake)
-include(cmake/alembic.cmake)
-include(cmake/glfw.cmake)
-include(cmake/clew.cmake)
-include(cmake/cuew.cmake)
-include(cmake/opensubdiv.cmake)
-include(cmake/sdl.cmake)
-include(cmake/opencollada.cmake)
-include(cmake/opencolorio.cmake)
-include(cmake/llvm.cmake)
-include(cmake/clang.cmake)
-if(APPLE)
-  include(cmake/openmp.cmake)
-endif()
-include(cmake/openimageio.cmake)
-include(cmake/tiff.cmake)
-include(cmake/flexbison.cmake)
-include(cmake/osl.cmake)
-include(cmake/tbb.cmake)
-include(cmake/openvdb.cmake)
-include(cmake/python.cmake)
-include(cmake/python_site_packages.cmake)
-include(cmake/numpy.cmake)
-if(UNIX AND NOT APPLE)
-  # Rely on PugiXML compiled with OpenImageIO
-else()
-  include(cmake/pugixml.cmake)
-endif()
-
-if(WITH_WEBP)
-  include(cmake/webp.cmake)
-endif()
-
-if(WITH_EMBREE)
-  include(cmake/embree.cmake)
-endif()
-
-if(WIN32)
-  # HMD branch deps
-  include(cmake/hidapi.cmake)
-  # OCIO deps
-  include(cmake/tinyxml.cmake)
-  include(cmake/yamlcpp.cmake)
-  # LCMS is an OCIO dep, but only if you build the apps, leaving it here for convenience
-  #include(cmake/lcms.cmake)
-
-endif()
-
-if(NOT WIN32 OR ENABLE_MINGW64)
-  include(cmake/openjpeg.cmake)
-  if(NOT WIN32 OR BUILD_MODE STREQUAL Release)
-    if(WIN32)
-      include(cmake/zlib_mingw.cmake)
-    endif()
-    include(cmake/lame.cmake)
-    include(cmake/ogg.cmake)
-    include(cmake/vorbis.cmake)
-    include(cmake/theora.cmake)
-    include(cmake/vpx.cmake)
-    include(cmake/x264.cmake)
-    include(cmake/xvidcore.cmake)
-    include(cmake/faad.cmake)
-    include(cmake/ffmpeg.cmake)
-    include(cmake/fftw.cmake)
-    include(cmake/sndfile.cmake)
-    if(WIN32)
-      include(cmake/iconv.cmake)
-    endif()
-    if(UNIX)
-      include(cmake/flac.cmake)
-      include(cmake/xml2.cmake)
-      if(NOT APPLE)
-        include(cmake/spnav.cmake)
-        include(cmake/jemalloc.cmake)
-      endif()
-    endif()
-  endif()
-endif()
-
-if(UNIX)
-  include(cmake/bzip2.cmake)
-  include(cmake/ffi.cmake)
-  include(cmake/lzma.cmake)
-  include(cmake/ssl.cmake)
-  include(cmake/sqlite.cmake)
-endif()
-
-include(cmake/harvest.cmake)

build_files/build_environment/cmake/alembic.cmake

@@ -1,105 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(ALEMBIC_HDF5)
-  set(ALEMBIC_HDF5_HL)
-  # in debug mode we do not build HDF5_hdf5_hl_LIBRARY which makes cmake really
-  # unhappy, stub it with the debug mode lib. it's not linking it in at this
-  # point in time anyhow
-  if(BUILD_MODE STREQUAL Debug)
-    set(ALEMBIC_HDF5_HL -DHDF5_hdf5_hl_LIBRARY=${LIBDIR}/hdf5/lib/libhdf5_hl_D.${LIBEXT})
-  endif()
-endif()
-
-if(WIN32)
-  set(ALEMBIC_ILMBASE ${LIBDIR}/openexr)
-else()
-  set(ALEMBIC_ILMBASE ${LIBDIR}/ilmbase)
-endif()
-
-set(ALEMBIC_EXTRA_ARGS
-  -DBUILDSTATIC=ON
-  -DLINKSTATIC=ON
-  -DALEMBIC_LIB_USES_BOOST=ON
-  -DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-  -DBoost_USE_MULTITHREADED=ON
-  -DUSE_STATIC_BOOST=On
-  -DBoost_USE_STATIC_LIBS=ON
-  -DBoost_USE_STATIC_RUNTIME=ON
-  -DBoost_DEBUG=ON
-  -DBOOST_ROOT=${LIBDIR}/boost
-  -DBoost_NO_SYSTEM_PATHS=ON
-  -DILMBASE_ROOT=${ALEMBIC_ILMBASE}
-  -DALEMBIC_ILMBASE_INCLUDE_DIRECTORY=${ALEMBIC_ILMBASE}/include/OpenEXR
-  -DALEMBIC_ILMBASE_HALF_LIB=${ALEMBIC_ILMBASE}/lib/${LIBPREFIX}Half${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DALEMBIC_ILMBASE_IMATH_LIB=${ALEMBIC_ILMBASE}/lib/${LIBPREFIX}Imath${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DALEMBIC_ILMBASE_ILMTHREAD_LIB=${ALEMBIC_ILMBASE}/lib/${LIBPREFIX}IlmThread${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DALEMBIC_ILMBASE_IEX_LIB=${ALEMBIC_ILMBASE}/lib/${LIBPREFIX}Iex${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DALEMBIC_ILMBASE_IEXMATH_LIB=${ALEMBIC_ILMBASE}/lib/${LIBPREFIX}IexMath${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DUSE_PYILMBASE=0
-  -DUSE_PYALEMBIC=0
-  -DUSE_ARNOLD=0
-  -DUSE_MAYA=0
-  -DUSE_PRMAN=0
-  -DUSE_HDF5=Off
-  -DUSE_STATIC_HDF5=Off
-  -DHDF5_ROOT=${LIBDIR}/hdf5
-  -DUSE_TESTS=Off
-  -DALEMBIC_NO_OPENGL=1
-  -DUSE_BINARIES=ON
-  -DALEMBIC_ILMBASE_LINK_STATIC=On
-  -DALEMBIC_SHARED_LIBS=OFF
-  -DGLUT_INCLUDE_DIR=""
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  ${ALEMBIC_HDF5_HL}
-)
-
-ExternalProject_Add(external_alembic
-  URL ${ALEMBIC_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${ALEMBIC_MD5}
-  PREFIX ${BUILD_DIR}/alembic
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/alembic -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${ALEMBIC_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/alembic
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_alembic after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/alembic ${HARVEST_TARGET}/alembic
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_alembic after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/alembic/lib/alembic.lib ${HARVEST_TARGET}/alembic/lib/alembic_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()
-
-
-
-add_dependencies(
-  external_alembic
-  external_boost
-  external_zlib
-  external_ilmbase
-  external_openexr
-)

build_files/build_environment/cmake/blendthumb.cmake

@@ -1,67 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(BUILD_MODE STREQUAL Release)
-  if(WIN32)
-    set(THUMB_DIR ${CMAKE_CURRENT_SOURCE_DIR}/../../release/windows/blendthumb)
-
-    ExternalProject_Add(external_zlib_32
-      URL ${ZLIB_URI}
-      CMAKE_GENERATOR ${GENERATOR_32}
-      URL_HASH MD5=${ZLIB_HASH}
-      DOWNLOAD_DIR ${DOWNLOAD_DIR}
-      PREFIX ${BUILD_DIR}/zlib32
-      CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/zlib32 ${DEFAULT_CMAKE_FLAGS}
-      INSTALL_DIR ${LIBDIR}/zlib32
-    )
-
-    ExternalProject_Add(external_zlib_64
-      URL ${ZLIB_URI}
-      CMAKE_GENERATOR ${GENERATOR_64}
-      URL_HASH MD5=${ZLIB_HASH}
-      DOWNLOAD_DIR ${DOWNLOAD_DIR}
-      PREFIX ${BUILD_DIR}/zlib64
-      CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/zlib64 ${DEFAULT_CMAKE_FLAGS}
-      INSTALL_DIR ${LIBDIR}/zlib64
-    )
-
-    ExternalProject_Add(external_blendthumb_32
-      CMAKE_GENERATOR ${GENERATOR_32}
-      SOURCE_DIR ${THUMB_DIR}
-      PREFIX ${BUILD_DIR}/blendthumb32
-      CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/blendThumb32 ${DEFAULT_CMAKE_FLAGS} -DZLIB_INCLUDE=${LIBDIR}/zlib32/include -DZLIB_LIBS=${LIBDIR}/zlib32/lib/zlibstatic.lib
-      INSTALL_DIR ${LIBDIR}/blendthumb32
-    )
-    add_dependencies(
-      external_blendthumb_32
-      external_zlib_32
-    )
-
-    ExternalProject_Add(external_blendthumb_64
-      CMAKE_GENERATOR ${GENERATOR_64}
-      SOURCE_DIR ${THUMB_DIR}
-      PREFIX ${BUILD_DIR}/blendthumb64
-      CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/blendThumb64 ${DEFAULT_CMAKE_FLAGS} -DZLIB_INCLUDE=${LIBDIR}/zlib64/include -DZLIB_LIBS=${LIBDIR}/zlib64/lib/zlibstatic.lib
-      INSTALL_DIR ${LIBDIR}/blendthumb64
-    )
-    add_dependencies(
-      external_blendthumb_64
-      external_zlib_64
-    )
-  endif()
-endif()

build_files/build_environment/cmake/blosc.cmake

@@ -1,75 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(BLOSC_EXTRA_ARGS
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DBUILD_TESTS=OFF
-  -DBUILD_BENCHMARKS=OFF
-  -DCMAKE_DEBUG_POSTFIX=_d
-  -DThreads_FOUND=1
-  -DPTHREAD_LIBS=${LIBDIR}/pthreads/lib/pthreadVC3.lib
-  -DPTHREAD_INCLUDE_DIR=${LIBDIR}/pthreads/inc
-  -DDEACTIVATE_SNAPPY=ON
-  -DCMAKE_POSITION_INDEPENDENT_CODE=ON
-)
-
-if(WIN32)
-  #prevent blosc from including it's own local copy of zlib in the object file
-  #and cause linker errors with everybody else
-  set(BLOSC_EXTRA_ARGS ${BLOSC_EXTRA_ARGS}
-    -DPREFER_EXTERNAL_ZLIB=ON
-  )
-endif()
-
-ExternalProject_Add(external_blosc
-  URL ${BLOSC_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${BLOSC_HASH}
-  PREFIX ${BUILD_DIR}/blosc
-  PATCH_COMMAND ${PATCH_CMD} --verbose -p 1 -N -d ${BUILD_DIR}/blosc/src/external_blosc < ${PATCH_DIR}/blosc.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/blosc ${DEFAULT_CMAKE_FLAGS} ${BLOSC_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/blosc
-)
-
-add_dependencies(
-  external_blosc
-  external_zlib
-)
-if(WIN32)
-  add_dependencies(
-    external_blosc
-    external_pthreads
-  )
-endif()
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_blosc after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/blosc/lib/libblosc.lib ${HARVEST_TARGET}/blosc/lib/libblosc.lib
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/blosc/include/ ${HARVEST_TARGET}/blosc/include/
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_blosc after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/blosc/lib/libblosc_d.lib ${HARVEST_TARGET}/blosc/lib/libblosc_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/boost.cmake

@@ -1,109 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(BOOST_ADDRESS_MODEL 64)
-
-if(WIN32)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(PYTHON_ARCH x64)
-    set(PYTHON_ARCH2 win-AMD64)
-    set(PYTHON_OUTPUTDIR ${BUILD_DIR}/python/src/external_python/pcbuild/amd64/)
-  else()
-    set(PYTHON_ARCH x86)
-    set(PYTHON_ARCH2 win32)
-    set(PYTHON_OUTPUTDIR ${BUILD_DIR}/python/src/external_python/pcbuild/win32/)
-    set(BOOST_ADDRESS_MODEL 32)
-  endif()
-  if(MSVC14)
-    set(BOOST_TOOLSET toolset=msvc-14.0)
-    set(BOOST_COMPILER_STRING -vc140)
-  endif()
-  set(JAM_FILE ${BUILD_DIR}/boost/src/external_boost/user-config.jam)
-  set(semi_path "${PATCH_DIR}/semi.txt")
-  FILE(TO_NATIVE_PATH ${semi_path} semi_path)
-  set(BOOST_CONFIGURE_COMMAND bootstrap.bat &&
-                echo using python : ${PYTHON_OUTPUTDIR}\\python.exe > "${JAM_FILE}" &&
-                echo.   : ${BUILD_DIR}/python/src/external_python/include ${BUILD_DIR}/python/src/external_python/pc >> "${JAM_FILE}" &&
-                echo.   : ${BUILD_DIR}/python/src/external_python/pcbuild >> "${JAM_FILE}" &&
-                type ${semi_path} >> "${JAM_FILE}"
-  )
-  set(BOOST_BUILD_COMMAND bjam)
-  #--user-config=user-config.jam
-  set(BOOST_BUILD_OPTIONS runtime-link=static )
-  #set(BOOST_WITH_PYTHON --with-python)
-  set(BOOST_HARVEST_CMD   ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/boost/lib/ ${HARVEST_TARGET}/boost/lib/ )
-  if(BUILD_MODE STREQUAL Release)
-    set(BOOST_HARVEST_CMD ${BOOST_HARVEST_CMD} && ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/boost/include/boost-1_68/ ${HARVEST_TARGET}/boost/include/)
-  endif()
-
-elseif(APPLE)
-  set(BOOST_CONFIGURE_COMMAND ./bootstrap.sh)
-  set(BOOST_BUILD_COMMAND ./b2)
-  set(BOOST_BUILD_OPTIONS toolset=darwin cxxflags=${PLATFORM_CXXFLAGS} linkflags=${PLATFORM_LDFLAGS} --disable-icu boost.locale.icu=off)
-  set(BOOST_HARVEST_CMD echo .)
-  set(BOOST_PATCH_COMMAND echo .)
-else()
-  set(BOOST_HARVEST_CMD echo .)
-  set(BOOST_CONFIGURE_COMMAND ./bootstrap.sh)
-  set(BOOST_BUILD_COMMAND ./b2)
-  set(BOOST_BUILD_OPTIONS cxxflags=${PLATFORM_CXXFLAGS} --disable-icu boost.locale.icu=off)
-  set(BOOST_PATCH_COMMAND echo .)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(BOOST_ADDRESS_MODEL 64)
-  else()
-    set(BOOST_ADDRESS_MODEL 32)
-  endif()
-endif()
-
-set(BOOST_OPTIONS
-  --with-filesystem
-  --with-locale
-  --with-thread
-  --with-regex
-  --with-system
-  --with-date_time
-  --with-wave
-  --with-atomic
-  --with-serialization
-  --with-program_options
-  --with-iostreams
-  ${BOOST_WITH_PYTHON}
-  ${BOOST_TOOLSET}
-)
-
-string(TOLOWER ${BUILD_MODE} BOOST_BUILD_TYPE)
-
-ExternalProject_Add(external_boost
-  URL ${BOOST_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${BOOST_HASH}
-  PREFIX ${BUILD_DIR}/boost
-  UPDATE_COMMAND  ""
-  PATCH_COMMAND ${BOOST_PATCH_COMMAND}
-  CONFIGURE_COMMAND ${BOOST_CONFIGURE_COMMAND}
-  BUILD_COMMAND ${BOOST_BUILD_COMMAND} ${BOOST_BUILD_OPTIONS} -j${MAKE_THREADS} architecture=x86 address-model=${BOOST_ADDRESS_MODEL} link=static threading=multi ${BOOST_OPTIONS}    --prefix=${LIBDIR}/boost install
-  BUILD_IN_SOURCE 1
-  INSTALL_COMMAND "${BOOST_HARVEST_CMD}"
-)
-
-if(WIN32)
-  add_dependencies(
-    external_boost
-    Make_Python_Environment
-  )
-endif()

build_files/build_environment/cmake/bzip2.cmake

@@ -1,39 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(BZIP2_PREFIX "${LIBDIR}/bzip2")
-set(BZIP2_CONFIGURE_ENV echo .)
-set(BZIP2_CONFIGURATION_ARGS)
-
-if(UNIX AND NOT APPLE)
-  set(BZIP2_LDFLAGS "-Wl,--as-needed")
-  set(BZIP2_CFLAGS "-fPIC -Wall -Winline -O2 -g -D_FILE_OFFSET_BITS=64")
-  set(BZIP2_CONFIGURE_ENV ${BZIP2_CONFIGURE_ENV} && export LDFLAGS=${BZIP2_LDFLAGS} && export CFLAGS=${BZIP2_CFLAGS}
-    && export PREFIX=${BZIP2_PREFIX})
-endif()
-
-ExternalProject_Add(external_bzip2
-  URL ${BZIP2_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${BZIP2_HASH}
-  PREFIX ${BUILD_DIR}/bzip2
-  CONFIGURE_COMMAND echo .
-  BUILD_COMMAND ${BZIP2_CONFIGURE_ENV} && cd ${BUILD_DIR}/bzip2/src/external_bzip2/ && make CFLAGS=${BZIP2_CFLAGS} LDFLAGS=${BZIP2_LDFLAGS} -j${MAKE_THREADS}
-  INSTALL_COMMAND ${BZIP2_CONFIGURE_ENV} && cd ${BUILD_DIR}/bzip2/src/external_bzip2/ && make CFLAGS=${BZIP2_CFLAGS} LDFLAGS=${BZIP2_LDFLAGS} PREFIX=${BZIP2_PREFIX} install
-  INSTALL_DIR ${LIBDIR}/bzip2
-)

build_files/build_environment/cmake/clang.cmake

@@ -1,63 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(CLANG_EXTRA_ARGS
-  -DCLANG_PATH_TO_LLVM_SOURCE=${BUILD_DIR}/ll/src/ll
-  -DCLANG_PATH_TO_LLVM_BUILD=${LIBDIR}/llvm
-  -DLLVM_USE_CRT_RELEASE=MT
-  -DLLVM_USE_CRT_DEBUG=MTd
-  -DLLVM_CONFIG=${LIBDIR}/llvm/bin/llvm-config
-)
-
-if(WIN32)
-  set(CLANG_GENERATOR "Ninja")
-else()
-  set(CLANG_GENERATOR "Unix Makefiles")
-endif()
-
-
-ExternalProject_Add(external_clang
-  URL ${CLANG_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${CLANG_HASH}
-  PREFIX ${BUILD_DIR}/clang
-  CMAKE_GENERATOR ${CLANG_GENERATOR}
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/clang ${DEFAULT_CMAKE_FLAGS} ${CLANG_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/clang
-)
-
-if(MSVC)
-  if(BUILD_MODE STREQUAL Release)
-    set(CLANG_HARVEST_COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/clang/ ${HARVEST_TARGET}/llvm/)
-  else()
-    set(CLANG_HARVEST_COMMAND
-      ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/clang/lib/ ${HARVEST_TARGET}/llvm/debug/lib/ &&
-      ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/clang/bin/ ${HARVEST_TARGET}/llvm/debug/bin/ &&
-      ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/clang/include/ ${HARVEST_TARGET}/llvm/debug/include/
-    )
-  endif()
-  ExternalProject_Add_Step(external_clang after_install
-    COMMAND ${CLANG_HARVEST_COMMAND}
-    DEPENDEES mkdir update patch download configure build install
-  )
-endif()
-
-add_dependencies(
-  external_clang
-  ll
-)

build_files/build_environment/cmake/clew.cmake

@@ -1,28 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(CLEW_EXTRA_ARGS)
-
-ExternalProject_Add(external_clew
-  URL ${CLEW_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${CLEW_HASH}
-  PREFIX ${BUILD_DIR}/clew
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/clew -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${CLEW_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/clew
-)

build_files/build_environment/cmake/cuew.cmake

@@ -1,29 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(CUEW_EXTRA_ARGS)
-
-ExternalProject_Add(external_cuew
-  URL ${CUEW_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${CUEW_HASH}
-  PREFIX ${BUILD_DIR}/cuew
-  PATCH_COMMAND ${PATCH_CMD} --verbose -p 0 -N -d ${BUILD_DIR}/cuew/src/external_cuew < ${PATCH_DIR}/cuew.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/cuew -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${CUEW_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/cuew
-)

build_files/build_environment/cmake/embree.cmake

@@ -1,69 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-# Note the utility apps may use png/tiff/gif system libraries, but the
-# library itself does not depend on them, so should give no problems.
-
-set(EMBREE_EXTRA_ARGS
-  -DEMBREE_ISPC_SUPPORT=OFF
-  -DEMBREE_TUTORIALS=OFF
-  -DEMBREE_STATIC_LIB=ON
-  -DEMBREE_RAY_MASK=ON
-  -DEMBREE_FILTER_FUNCTION=ON
-  -DEMBREE_BACKFACE_CULLING=OFF
-  -DEMBREE_TASKING_SYSTEM=INTERNAL
-  -DEMBREE_MAX_ISA=AVX2
-)
-
-if(WIN32)
-  set(EMBREE_BUILD_DIR ${BUILD_MODE}/)
-else()
-  set(EMBREE_BUILD_DIR)
-endif()
-
-ExternalProject_Add(external_embree
-  URL ${EMBREE_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${EMBREE_HASH}
-  PREFIX ${BUILD_DIR}/embree
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/embree ${DEFAULT_CMAKE_FLAGS} ${EMBREE_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/embree
-)
-if(WIN32)
-
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_embree after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/embree ${HARVEST_TARGET}/embree
-      DEPENDEES install
-    )
-  else()
-  ExternalProject_Add_Step(external_embree after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/embree3.lib ${HARVEST_TARGET}/embree/lib/embree3_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/embree_avx.lib ${HARVEST_TARGET}/embree/lib/embree_avx_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/embree_avx2.lib ${HARVEST_TARGET}/embree/lib/embree_avx2_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/embree_sse42.lib ${HARVEST_TARGET}/embree/lib/embree_sse42_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/lexers.lib ${HARVEST_TARGET}/embree/lib/lexers_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/math.lib ${HARVEST_TARGET}/embree/lib/math_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/simd.lib ${HARVEST_TARGET}/embree/lib/simd_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/sys.lib ${HARVEST_TARGET}/embree/lib/sys_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/tasking.lib ${HARVEST_TARGET}/embree/lib/tasking_d.lib
-      DEPENDEES install
-    )
-  endif()
-
-endif()

build_files/build_environment/cmake/faad.cmake

@@ -1,40 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(FAAD_EXTRA_ARGS)
-
-if(WIN32)
-  set(FAAD_EXTRA_CONFIGURE "utils\\win32\\ac2ver.exe" "faad2" "configure.ac" > libfaad\\win32_ver.h)
-else()
-  set(FAAD_EXTRA_CONFIGURE echo .)
-endif()
-
-ExternalProject_Add(external_faad
-  URL ${FAAD_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${FAAD_HASH}
-  PREFIX ${BUILD_DIR}/faad
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/faad/src/external_faad/ && ${FAAD_EXTRA_CONFIGURE} && ${CONFIGURE_COMMAND} --disable-shared --enable-static --prefix=${LIBDIR}/faad
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/faad/src/external_faad/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/faad/src/external_faad/ && make install
-  INSTALL_DIR ${LIBDIR}/faad
-)
-
-if(MSVC)
-  set_target_properties(external_faad PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/ffi.cmake

@@ -1,40 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_ffi
-  URL ${FFI_URI}
-  URL_HASH SHA256=${FFI_HASH}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  PREFIX ${BUILD_DIR}/ffi
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ffi/src/external_ffi/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/ffi
-    --enable-shared=no
-    --enable-static=yes
-    --with-pic
-    --libdir=${LIBDIR}/ffi/lib/
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ffi/src/external_ffi/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ffi/src/external_ffi/ && make install
-  PATCH_COMMAND ${PATCH_CMD} -p 0 -d ${BUILD_DIR}/ffi/src/external_ffi < ${PATCH_DIR}/ffi.diff
-  INSTALL_DIR ${LIBDIR}/ffi
-)
-
-if(UNIX AND NOT APPLE)
-  ExternalProject_Add_Step(external_ffi after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/ffi/lib/libffi.a ${LIBDIR}/ffi/lib/libffi_pic.a
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/ffmpeg.cmake

@@ -1,152 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(FFMPEG_CFLAGS "-I${mingw_LIBDIR}/lame/include -I${mingw_LIBDIR}/openjpeg/include/ -I${mingw_LIBDIR}/ogg/include -I${mingw_LIBDIR}/vorbis/include -I${mingw_LIBDIR}/theora/include -I${mingw_LIBDIR}/vpx/include -I${mingw_LIBDIR}/x264/include -I${mingw_LIBDIR}/xvidcore/include -I${mingw_LIBDIR}/zlib/include")
-set(FFMPEG_LDFLAGS "-L${mingw_LIBDIR}/lame/lib -L${mingw_LIBDIR}/openjpeg/lib -L${mingw_LIBDIR}/ogg/lib -L${mingw_LIBDIR}/vorbis/lib -L${mingw_LIBDIR}/theora/lib -L${mingw_LIBDIR}/vpx/lib -L${mingw_LIBDIR}/x264/lib -L${mingw_LIBDIR}/xvidcore/lib -L${mingw_LIBDIR}/zlib/lib")
-set(FFMPEG_EXTRA_FLAGS --pkg-config-flags=--static --extra-cflags=${FFMPEG_CFLAGS} --extra-ldflags=${FFMPEG_LDFLAGS})
-set(FFMPEG_ENV PKG_CONFIG_PATH=${mingw_LIBDIR}/openjpeg/lib/pkgconfig:${mingw_LIBDIR}/x264/lib/pkgconfig:${mingw_LIBDIR}/vorbis/lib/pkgconfig:${mingw_LIBDIR}/ogg/lib/pkgconfig:${mingw_LIBDIR})
-
-if(WIN32)
-  set(FFMPEG_ENV set ${FFMPEG_ENV} &&)
-  set(FFMPEG_EXTRA_FLAGS
-    ${FFMPEG_EXTRA_FLAGS}
-    --disable-static
-    --enable-shared
-    --enable-w32threads
-    --disable-pthreads
-    --enable-libopenjpeg
-  )
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "4")
-    set(FFMPEG_EXTRA_FLAGS
-      ${FFMPEG_EXTRA_FLAGS}
-      --x86asmexe=yasm
-    )
-  endif()
-else()
-  set(FFMPEG_EXTRA_FLAGS
-    ${FFMPEG_EXTRA_FLAGS}
-    --enable-static
-    --disable-shared
-    --enable-libopenjpeg
-  )
-endif()
-
-if(APPLE)
-  set(FFMPEG_EXTRA_FLAGS
-    ${FFMPEG_EXTRA_FLAGS}
-    --target-os=darwin
-    )
-endif()
-
-ExternalProject_Add(external_ffmpeg
-  URL ${FFMPEG_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${FFMPEG_HASH}
-  # OpenJpeg is compiled with pthread support on Linux, which is all fine and is what we
-  # want for maximum runtime performance, but due to static nature of that library we
-  # need to force ffmpeg to link against pthread, otherwise test program used by autoconf
-  # will fail. This patch does that in a way that is compatible with multiple distributions.
-  PATCH_COMMAND ${PATCH_CMD} --verbose -p 1 -N -d ${BUILD_DIR}/ffmpeg/src/external_ffmpeg < ${PATCH_DIR}/ffmpeg.diff
-  PREFIX ${BUILD_DIR}/ffmpeg
-  CONFIGURE_COMMAND ${CONFIGURE_ENV_NO_PERL} &&
-    cd ${BUILD_DIR}/ffmpeg/src/external_ffmpeg/ &&
-    ${FFMPEG_ENV} ${CONFIGURE_COMMAND_NO_TARGET} ${FFMPEG_EXTRA_FLAGS}
-    --disable-lzma
-    --disable-avfilter
-    --disable-vdpau
-    --disable-bzlib
-    --disable-libgsm
-    --disable-libspeex
-    --enable-libvpx
-    --prefix=${LIBDIR}/ffmpeg
-    --enable-libtheora
-    --enable-libvorbis
-    --enable-zlib
-    --enable-stripping
-    --enable-runtime-cpudetect
-    --disable-vaapi
-    --disable-nonfree
-    --enable-gpl
-    --disable-postproc
-    --enable-libmp3lame
-    --disable-librtmp
-    --enable-libx264
-    --enable-libxvid
-    --disable-libopencore-amrnb
-    --disable-libopencore-amrwb
-    --disable-libdc1394
-    --disable-version3
-    --disable-debug
-    --enable-optimizations
-    --disable-sse
-    --disable-ssse3
-    --enable-ffplay
-    --disable-openssl
-    --disable-securetransport
-    --disable-indev=avfoundation
-    --disable-indev=qtkit
-    --disable-sdl2
-    --disable-gnutls
-    --disable-videotoolbox
-    --disable-libxcb
-    --disable-xlib
-    --disable-audiotoolbox
-    --disable-cuvid
-    --disable-nvenc
-    --disable-indev=jack
-    --disable-indev=alsa
-    --disable-outdev=alsa
-    --disable-crystalhd
-    --disable-sndio
-  BUILD_COMMAND ${CONFIGURE_ENV_NO_PERL} && cd ${BUILD_DIR}/ffmpeg/src/external_ffmpeg/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV_NO_PERL} && cd ${BUILD_DIR}/ffmpeg/src/external_ffmpeg/ && make install
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/ffmpeg ${DEFAULT_CMAKE_FLAGS}
-  INSTALL_DIR ${LIBDIR}/ffmpeg
-)
-
-if(MSVC)
-  set_target_properties(external_ffmpeg PROPERTIES FOLDER Mingw)
-endif()
-
-add_dependencies(
-  external_ffmpeg
-  external_zlib
-  external_faad
-  external_openjpeg
-  external_xvidcore
-  external_x264
-  external_vpx
-  external_theora
-  external_vorbis
-  external_ogg
-  external_lame
-)
-if(WIN32)
-  add_dependencies(
-    external_ffmpeg
-    external_zlib_mingw
-  )
-endif()
-
-if(BUILD_MODE STREQUAL Release AND WIN32)
-  ExternalProject_Add_Step(external_ffmpeg after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/ffmpeg/include ${HARVEST_TARGET}/ffmpeg/include
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/ffmpeg/bin ${HARVEST_TARGET}/ffmpeg/lib
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/fftw.cmake

@@ -1,47 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(FFTW_EXTRA_ARGS)
-
-if(WIN32)
-  set(FFTW3_ENV set CFLAGS=-fno-stack-check -fno-stack-protector -mno-stack-arg-probe -fno-lto &&)
-  set(FFTW3_PATCH_COMMAND ${PATCH_CMD} --verbose -p 0 -N -d ${BUILD_DIR}/fftw3/src/external_fftw3 < ${PATCH_DIR}/fftw3.diff)
-endif()
-
-ExternalProject_Add(external_fftw3
-  URL ${FFTW_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${FFTW_HASH}
-  PREFIX ${BUILD_DIR}/fftw3
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && ${FFTW3_ENV} cd ${BUILD_DIR}/fftw3/src/external_fftw3/ && ${CONFIGURE_COMMAND} --enable-static --prefix=${mingw_LIBDIR}/fftw3
-  PATCH_COMMAND ${FFTW3_PATCH_COMMAND}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/fftw3/src/external_fftw3/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/fftw3/src/external_fftw3/ && make install
-  INSTALL_DIR ${LIBDIR}/fftw3
-)
-
-if(MSVC)
-  set_target_properties(external_fftw3 PROPERTIES FOLDER Mingw)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_fftw3 after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/fftw3/lib/libfftw3.a ${HARVEST_TARGET}/fftw3/lib/libfftw.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/fftw3/include/fftw3.h ${HARVEST_TARGET}/fftw3/include/fftw3.h
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/flac.cmake

@@ -1,32 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_flac
-  URL ${FLAC_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${FLAC_HASH}
-  PREFIX ${BUILD_DIR}/flac
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/flac/src/external_flac/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/flac --disable-shared --enable-static
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/flac/src/external_flac/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/flac/src/external_flac/ && make install
-  INSTALL_DIR ${LIBDIR}/flac
-)
-
-if(MSVC)
-  set_target_properties(external_flac PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/flexbison.cmake

@@ -1,31 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(FLEXBISON_EXTRA_ARGS)
-
-ExternalProject_Add(external_flexbison
-  URL ${FLEXBISON_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${FLEXBISON_HASH}
-  PREFIX ${BUILD_DIR}/flexbison
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/flexbison ${DEFAULT_CMAKE_FLAGS} ${FLEXBISON_EXTRA_ARGS}
-  CONFIGURE_COMMAND echo .
-  BUILD_COMMAND echo .
-  INSTALL_COMMAND COMMAND ${CMAKE_COMMAND} -E copy_directory ${BUILD_DIR}/flexbison/src/external_flexbison/ ${LIBDIR}/flexbison/
-  INSTALL_DIR ${LIBDIR}/flexbison
-)

build_files/build_environment/cmake/freeglut.cmake

@@ -1,35 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    set(FREEGLUT_EXTRA_ARGS
-      -DFREEGLUT_BUILD_SHARED_LIBS=Off
-      -DFREEGLUT_BUILD_STATIC_LIBS=On
-    )
-
-    ExternalProject_Add(external_freeglut
-      URL ${FREEGLUT_URI}
-      DOWNLOAD_DIR ${DOWNLOAD_DIR}
-      URL_HASH MD5=${FREEGLUT_HASH}
-      PREFIX ${BUILD_DIR}/freeglut
-      CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/freeglut ${DEFAULT_C_FLAGS} ${DEFAULT_CXX_FLAGS} ${FREEGLUT_EXTRA_ARGS}
-      INSTALL_DIR ${LIBDIR}/freeglut
-    )
-  endif()
-endif()

build_files/build_environment/cmake/freetype.cmake

@@ -1,44 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(FREETYPE_EXTRA_ARGS
-  -DCMAKE_RELEASE_POSTFIX:STRING=2ST
-  -DCMAKE_DEBUG_POSTFIX:STRING=2ST_d
-  -DWITH_BZip2=OFF
-  -DWITH_HarfBuzz=OFF
-  -DFT_WITH_HARFBUZZ=OFF
-  -DFT_WITH_BZIP2=OFF
-  -DCMAKE_DISABLE_FIND_PACKAGE_HarfBuzz=TRUE
-  -DCMAKE_DISABLE_FIND_PACKAGE_BZip2=TRUE)
-
-ExternalProject_Add(external_freetype
-  URL ${FREETYPE_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${FREETYPE_HASH}
-  PREFIX ${BUILD_DIR}/freetype
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/freetype ${DEFAULT_CMAKE_FLAGS} ${FREETYPE_EXTRA_ARGS}
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/freetype/src/external_freetype < ${PATCH_DIR}/freetype.diff
-  INSTALL_DIR ${LIBDIR}/freetype
-)
-
-if(BUILD_MODE STREQUAL Release AND WIN32)
-  ExternalProject_Add_Step(external_freetype after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/freetype ${HARVEST_TARGET}/freetype
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/glew.cmake

@@ -1,32 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(GLEW_EXTRA_ARGS
-  -DBUILD_UTILS=Off
-  -DBUILD_SHARED_LIBS=Off
-)
-
-ExternalProject_Add(external_glew
-  URL ${GLEW_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${GLEW_HASH}
-  PATCH_COMMAND COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/cmakelists_glew.txt ${BUILD_DIR}/glew/src/external_glew/CMakeLists.txt
-  PREFIX ${BUILD_DIR}/glew
-  CMAKE_ARGS -DCMAKE_POSITION_INDEPENDENT_CODE=ON -DCMAKE_INSTALL_PREFIX=${LIBDIR}/glew ${DEFAULT_CMAKE_FLAGS} ${GLEW_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/glew
-)

build_files/build_environment/cmake/glfw.cmake

@@ -1,28 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(GLFW_EXTRA_ARGS)
-
-ExternalProject_Add(external_glfw
-  URL ${GLFW_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${GLFW_HASH}
-  PREFIX ${BUILD_DIR}/glfw
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/glfw -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${GLFW_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/glfw
-)

build_files/build_environment/cmake/harvest.cmake

@@ -1,203 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-########################################################################
-# Copy all generated files to the proper strucure as blender prefers
-########################################################################
-
-if(NOT DEFINED HARVEST_TARGET)
-  set(HARVEST_TARGET ${CMAKE_CURRENT_SOURCE_DIR}/Harvest)
-endif()
-message("HARVEST_TARGET = ${HARVEST_TARGET}")
-
-if(WIN32)
-if(BUILD_MODE STREQUAL Release)
-  add_custom_target(Harvest_Release_Results
-    COMMAND # jpeg rename libfile + copy include
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/jpg/lib/jpeg-static.lib ${HARVEST_TARGET}/jpeg/lib/libjpeg.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/jpg/include/ ${HARVEST_TARGET}/jpeg/include/ &&
-        # OpenImageIO
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/OpenImageIO/include ${HARVEST_TARGET}/OpenImageIO/include &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/OpenImageIO/lib ${HARVEST_TARGET}/OpenImageIO/lib &&
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/OpenImageIO/bin/idiff.exe ${HARVEST_TARGET}/OpenImageIO/bin/idiff.exe &&
-        # png
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/png/lib/libpng16_static.lib ${HARVEST_TARGET}/png/lib/libpng.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/png/include/ ${HARVEST_TARGET}/png/include/ &&
-        # freeglut-> opengl
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/freeglut/lib/freeglut_static.lib ${HARVEST_TARGET}/opengl/lib/freeglut_static.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/freeglut/include/ ${HARVEST_TARGET}/opengl/include/ &&
-        # glew-> opengl
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/glew/lib/libglew32.lib ${HARVEST_TARGET}/opengl/lib/glew.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/glew/include/ ${HARVEST_TARGET}/opengl/include/ &&
-        # sndfile
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/sndfile/lib/libsndfile.dll.a ${HARVEST_TARGET}/sndfile/lib/libsndfile-1.lib &&
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/sndfile/bin/libsndfile-1.dll ${HARVEST_TARGET}/sndfile/lib/libsndfile-1.dll &&
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/sndfile/include/sndfile.h ${HARVEST_TARGET}/sndfile/include/sndfile.h &&
-        # tiff
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/tiff/lib/tiff.lib ${HARVEST_TARGET}/tiff/lib/libtiff.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/tiff/include/ ${HARVEST_TARGET}/tiff/include/ &&
-        # BlendThumb
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/BlendThumb64/bin/blendthumb.dll ${HARVEST_TARGET}/ThumbHandler/lib/BlendThumb64.dll &&
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/BlendThumb32/bin/blendthumb.dll ${HARVEST_TARGET}/ThumbHandler/lib/BlendThumb.dll &&
-        # hidapi
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/hidapi/ ${HARVEST_TARGET}/hidapi/ &&
-        # webp, straight up copy
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/webp ${HARVEST_TARGET}/webp &&
-    DEPENDS
-  )
-endif()
-
-if(BUILD_MODE STREQUAL Debug)
-  add_custom_target(Harvest_Debug_Results
-        # OpenImageIO
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimageio/lib/OpenImageIO.lib ${HARVEST_TARGET}/openimageio/lib/OpenImageIO_d.lib &&
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimageio/lib/OpenImageIO_Util.lib ${HARVEST_TARGET}/openimageio/lib/OpenImageIO_Util_d.lib &&
-        # python
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/python/ ${HARVEST_TARGET}/python/ &&
-        # hdf5
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/hdf5/lib ${HARVEST_TARGET}/hdf5/lib &&
-        # numpy
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}_numpy_${NUMPY_SHORT_VERSION}d.tar.gz ${HARVEST_TARGET}/Release/python${PYTHON_SHORT_VERSION_NO_DOTS}_numpy_${NUMPY_SHORT_VERSION}d.tar.gz &&
-        # python
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}_d.tar.gz ${HARVEST_TARGET}/Release/python${PYTHON_SHORT_VERSION_NO_DOTS}_d.tar.gz
-    DEPENDS Package_Python
-  )
-endif()
-
-else(WIN32)
-
-function(harvest from to)
-  set(pattern "")
-  foreach(f ${ARGN})
-    set(pattern ${f})
-  endforeach()
-
-  if(pattern STREQUAL "")
-    get_filename_component(dirpath ${to} DIRECTORY)
-    get_filename_component(filename ${to} NAME)
-    install(
-      FILES ${LIBDIR}/${from}
-      DESTINATION ${HARVEST_TARGET}/${dirpath}
-      RENAME ${filename})
-  else()
-    install(
-      DIRECTORY ${LIBDIR}/${from}/
-      DESTINATION ${HARVEST_TARGET}/${to}
-      USE_SOURCE_PERMISSIONS
-      FILES_MATCHING PATTERN ${pattern}
-      PATTERN "pkgconfig" EXCLUDE
-      PATTERN "cmake" EXCLUDE
-      PATTERN "__pycache__" EXCLUDE
-      PATTERN "tests" EXCLUDE)
-  endif()
-endfunction()
-
-harvest(alembic/include alembic/include "*.h")
-harvest(alembic/lib/libAlembic.a alembic/lib/libAlembic.a)
-harvest(alembic/bin alembic/bin "*")
-harvest(boost/include boost/include "*")
-harvest(boost/lib boost/lib "*.a")
-harvest(ffmpeg/include ffmpeg/include "*.h")
-harvest(ffmpeg/lib ffmpeg/lib "*.a")
-harvest(fftw3/include fftw3/include "*.h")
-harvest(fftw3/lib fftw3/lib "*.a")
-harvest(flac/lib sndfile/lib "libFLAC.a")
-harvest(freetype/include freetype/include "*.h")
-harvest(freetype/lib/libfreetype2ST.a freetype/lib/libfreetype.a)
-harvest(glew/include glew/include "*.h")
-harvest(glew/lib glew/lib "*.a")
-harvest(ilmbase openexr "*")
-harvest(ilmbase/include openexr/include "*.h")
-harvest(jemalloc/include jemalloc/include "*.h")
-harvest(jemalloc/lib jemalloc/lib "*.a")
-harvest(jpg/include jpeg/include "*.h")
-harvest(jpg/lib jpeg/lib "libjpeg.a")
-harvest(lame/lib ffmpeg/lib "*.a")
-harvest(clang/bin llvm/bin "clang-format")
-harvest(clang/include llvm/include "*")
-harvest(llvm/include llvm/include "*")
-harvest(llvm/bin llvm/bin "llvm-config")
-harvest(llvm/lib llvm/lib "libLLVM*.a")
-if(APPLE)
-  harvest(openmp/lib openmp/lib "*")
-  harvest(openmp/include openmp/include "*.h")
-endif()
-harvest(ogg/lib ffmpeg/lib "*.a")
-harvest(openal/include openal/include "*.h")
-if(UNIX AND NOT APPLE)
-  harvest(openal/lib openal/lib "*.a")
-
-  harvest(blosc/include blosc/include "*.h")
-  harvest(blosc/lib blosc/lib "*.a")
-
-  harvest(zlib/include zlib/include "*.h")
-  harvest(zlib/lib zlib/lib "*.a")
-
-  harvest(xml2/include xml2/include "*.h")
-  harvest(xml2/lib xml2/lib "*.a")
-else()
-  harvest(blosc/lib openvdb/lib "*.a")
-  harvest(xml2/lib opencollada/lib "*.a")
-endif()
-harvest(opencollada/include/opencollada opencollada/include "*.h")
-harvest(opencollada/lib/opencollada opencollada/lib "*.a")
-harvest(opencolorio/include opencolorio/include "*.h")
-harvest(opencolorio/lib opencolorio/lib "*.a")
-harvest(opencolorio/lib/static opencolorio/lib "*.a")
-harvest(openexr/include openexr/include "*.h")
-harvest(openexr/lib openexr/lib "*.a")
-harvest(openimageio/bin openimageio/bin "idiff")
-harvest(openimageio/bin openimageio/bin "maketx")
-harvest(openimageio/bin openimageio/bin "oiiotool")
-harvest(openimageio/include openimageio/include "*")
-harvest(openimageio/lib openimageio/lib "*.a")
-harvest(openjpeg/include/openjpeg-2.3 openjpeg/include "*.h")
-harvest(openjpeg/lib openjpeg/lib "*.a")
-harvest(opensubdiv/include opensubdiv/include "*.h")
-harvest(opensubdiv/lib opensubdiv/lib "*.a")
-harvest(openvdb/include/openvdb openvdb/include/openvdb "*.h")
-harvest(openvdb/lib openvdb/lib "*.a")
-harvest(osl/bin osl/bin "oslc")
-harvest(osl/include osl/include "*.h")
-harvest(osl/lib osl/lib "*.a")
-harvest(osl/shaders osl/shaders "*.h")
-harvest(png/include png/include "*.h")
-harvest(png/lib png/lib "*.a")
-harvest(python/bin python/bin "python${PYTHON_SHORT_VERSION}m")
-harvest(python/include python/include "*h")
-harvest(python/lib python/lib "*")
-harvest(sdl/include/SDL2 sdl/include "*.h")
-harvest(sdl/lib sdl/lib "libSDL2.a")
-harvest(sndfile/include sndfile/include "*.h")
-harvest(sndfile/lib sndfile/lib "*.a")
-harvest(spnav/include spnav/include "*.h")
-harvest(spnav/lib spnav/lib "*.a")
-harvest(tbb/include tbb/include "*.h")
-harvest(tbb/lib/libtbb_static.a tbb/lib/libtbb.a)
-harvest(theora/lib ffmpeg/lib "*.a")
-harvest(tiff/include tiff/include "*.h")
-harvest(tiff/lib tiff/lib "*.a")
-harvest(vorbis/lib ffmpeg/lib "*.a")
-harvest(vpx/lib ffmpeg/lib "*.a")
-harvest(webp/lib ffmpeg/lib "*.a")
-harvest(x264/lib ffmpeg/lib "*.a")
-harvest(xvidcore/lib ffmpeg/lib "*.a")
-harvest(embree/include embree/include "*.h")
-harvest(embree/lib embree/lib "*.a")
-
-endif()

build_files/build_environment/cmake/hdf5.cmake

@@ -1,42 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(HDF5_EXTRA_ARGS
-  -DHDF5_ENABLE_THREADSAFE=Off
-  -DHDF5_BUILD_CPP_LIB=Off
-  -DBUILD_TESTING=Off
-  -DHDF5_BUILD_TOOLS=Off
-  -DHDF5_BUILD_EXAMPLES=Off
-  -DHDF5_BUILD_HL_LIB=On
-  -DBUILD_STATIC_CRT_LIBS=On
-  -DBUILD_SHARED_LIBS=On
-)
-
-if(WIN32)
-  set(HDF5_PATCH ${PATCH_CMD} --verbose -p 0 -d ${BUILD_DIR}/hdf5/src/external_hdf5 < ${PATCH_DIR}/hdf5.diff)
-endif()
-
-ExternalProject_Add(external_hdf5
-  URL ${HDF5_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${HDF5_HASH}
-  PREFIX ${BUILD_DIR}/hdf5
-  PATCH_COMMAND ${HDF5_PATCH}
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/hdf5 ${HDF5_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/hdf5
-)

build_files/build_environment/cmake/hidapi.cmake

@@ -1,29 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(HIDAPI_EXTRA_ARGS)
-
-ExternalProject_Add(external_hidapi
-  URL ${HIDAPI_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${HIDAPI_HASH}
-  PREFIX ${BUILD_DIR}/hidapi
-  PATCH_COMMAND COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/cmakelists_hidapi.txt   ${BUILD_DIR}/hidapi/src/external_hidapi/cmakelists.txt && ${PATCH_CMD} -p 0 -d ${BUILD_DIR}/hidapi/src/external_hidapi < ${PATCH_DIR}/hidapi.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/hidapi -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${HIDAPI_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/hidapi
-)

build_files/build_environment/cmake/iconv.cmake

@@ -1,41 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(ICONV_EXTRA_ARGS)
-
-ExternalProject_Add(external_iconv
-  URL ${ICONV_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${ICONV_HASH}
-  PREFIX ${BUILD_DIR}/iconv
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/iconv/src/external_iconv/ && ${CONFIGURE_COMMAND} --enable-static --prefix=${mingw_LIBDIR}/iconv
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/iconv/src/external_iconv/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/iconv/src/external_iconv/ && make install
-  INSTALL_DIR ${LIBDIR}/iconv
-)
-
-if(MSVC)
-  set_target_properties(external_iconv PROPERTIES FOLDER Mingw)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_iconv after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/iconv/lib/libiconv.a ${HARVEST_TARGET}/iconv/lib/iconv.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/iconv/include/iconv.h ${HARVEST_TARGET}/iconv/include/iconv.h
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/ilmbase.cmake

@@ -1,58 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  set(ILMBASE_CMAKE_CXX_STANDARD_LIBRARIES "kernel32${LIBEXT} user32${LIBEXT} gdi32${LIBEXT} winspool${LIBEXT} shell32${LIBEXT} ole32${LIBEXT} oleaut32${LIBEXT} uuid${LIBEXT} comdlg32${LIBEXT} advapi32${LIBEXT} psapi${LIBEXT}")
-  set(ILMBASE_EXTRA_ARGS
-    -DBUILD_SHARED_LIBS=OFF
-    -DCMAKE_CXX_STANDARD_LIBRARIES=${ILMBASE_CMAKE_CXX_STANDARD_LIBRARIES}
-  )
-
-  ExternalProject_Add(external_ilmbase
-    URL ${ILMBASE_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH MD5=${ILMBASE_HASH}
-    PREFIX ${BUILD_DIR}/ilmbase
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/ilmbase ${DEFAULT_CMAKE_FLAGS} ${ILMBASE_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/openexr
-  )
-
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_ilmbase after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/ilmbase ${HARVEST_TARGET}/openexr
-      DEPENDEES install
-    )
-  endif()
-
-else()
-  set(ILMBASE_EXTRA_ARGS
-    --enable-static
-    --disable-shared
-    --enable-cxxstd=11
-  )
-  ExternalProject_Add(external_ilmbase
-    URL ${ILMBASE_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH MD5=${ILMBASE_HASH}
-    PREFIX ${BUILD_DIR}/ilmbase
-    CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ilmbase/src/external_ilmbase/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/ilmbase ${ILMBASE_EXTRA_ARGS}
-    BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ilmbase/src/external_ilmbase/ && make -j${MAKE_THREADS}
-    INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ilmbase/src/external_ilmbase/ && make install
-    INSTALL_DIR ${LIBDIR}/openexr
-  )
-endif()

build_files/build_environment/cmake/jemalloc.cmake

@@ -1,28 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_jemalloc
-  URL ${JEMALLOC_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${JEMALLOC_HASH}
-  PREFIX ${BUILD_DIR}/jemalloc
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/jemalloc/src/external_jemalloc/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/jemalloc --disable-shared --enable-static --with-pic
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/jemalloc/src/external_jemalloc/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/jemalloc/src/external_jemalloc/ && make install
-  INSTALL_DIR ${LIBDIR}/jemalloc
-)

build_files/build_environment/cmake/jpeg.cmake

@@ -1,65 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  # cmake for windows
-  set(JPEG_EXTRA_ARGS -DNASM=${NASM_PATH} -DWITH_JPEG8=ON  -DCMAKE_DEBUG_POSTFIX=d)
-
-  ExternalProject_Add(external_jpeg
-    URL ${JPEG_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH MD5=${JPEG_HASH}
-    PREFIX ${BUILD_DIR}/jpg
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/jpg ${DEFAULT_CMAKE_FLAGS} ${JPEG_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/jpg
-  )
-
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_jpeg after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/jpg/lib/jpegd${LIBEXT}  ${LIBDIR}/jpg/lib/jpeg${LIBEXT}
-      DEPENDEES install
-    )
-  endif()
-
-  if(BUILD_MODE STREQUAL Release)
-    set(JPEG_LIBRARY jpeg-static${LIBEXT})
-  else()
-    set(JPEG_LIBRARY jpeg-staticd${LIBEXT})
-  endif()
-else(WIN32)
-  # autoconf for unix
-  if(APPLE)
-    set(JPEG_EXTRA_ARGS --host x86_64-apple-darwin --with-jpeg8)
-  else()
-    set(JPEG_EXTRA_ARGS --with-jpeg8)
-  endif()
-
-  ExternalProject_Add(external_jpeg
-    URL ${JPEG_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH MD5=${JPEG_HASH}
-    CONFIGURE_COMMAND ${CONFIGURE_ENV} && autoreconf -fiv && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/jpg NASM=yasm ${JPEG_EXTRA_ARGS}
-    BUILD_IN_SOURCE 1
-    BUILD_COMMAND ${CONFIGURE_ENV} && make install
-    PREFIX ${BUILD_DIR}/jpg
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/jpg ${DEFAULT_CMAKE_FLAGS} ${JPEG_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/jpg
-  )
-
-  set(JPEG_LIBRARY libjpeg${LIBEXT})
-endif(WIN32)

build_files/build_environment/cmake/lame.cmake

@@ -1,47 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(LAME_EXTRA_ARGS)
-if(MSVC)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "4")
-  set(LAME_EXTRA_ARGS CFLAGS=-msse)
-  endif()
-endif()
-
-ExternalProject_Add(external_lame
-  URL ${LAME_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${LAME_HASH}
-  PREFIX ${BUILD_DIR}/lame
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lame/src/external_lame/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/lame --disable-shared --enable-static ${LAME_EXTRA_ARGS}
-    --enable-export=full
-    --with-fileio=sndfile
-    --without-vorbis
-    --with-pic
-    --disable-mp3x
-    --disable-mp3rtp
-    --disable-gtktest
-    --disable-frontend
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lame/src/external_lame/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lame/src/external_lame/ && make install
-  INSTALL_DIR ${LIBDIR}/lame
-)
-
-if(MSVC)
-  set_target_properties(external_lame PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/lcms.cmake

@@ -1,31 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(LCMS_EXTRA_ARGS
-)
-
-ExternalProject_Add(external_lcms
-  URL ${LCMS_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${LCMS_HASH}
-  PREFIX ${BUILD_DIR}/lcms
-  #patch taken from ocio
-  PATCH_COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/cmakelists_lcms.txt ${BUILD_DIR}/lcms/src/external_lcms/CMakeLists.txt
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/lcms ${DEFAULT_CMAKE_FLAGS} ${LCMS_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/lcms
-)

build_files/build_environment/cmake/llvm.cmake

@@ -1,58 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(LLVM_EXTRA_ARGS
-  -DLLVM_USE_CRT_RELEASE=MT
-  -DLLVM_USE_CRT_DEBUG=MTd
-  -DLLVM_INCLUDE_TESTS=OFF
-  -DLLVM_TARGETS_TO_BUILD=X86
-  -DLLVM_INCLUDE_EXAMPLES=OFF
-  -DLLVM_ENABLE_TERMINFO=OFF
-)
-
-if(WIN32)
-  set(LLVM_GENERATOR "Ninja")
-else()
-  set(LLVM_GENERATOR "Unix Makefiles")
-endif()
-
-# short project name due to long filename issues on windows
-ExternalProject_Add(ll
-  URL ${LLVM_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${LLVM_HASH}
-  CMAKE_GENERATOR ${LLVM_GENERATOR}
-  PREFIX ${BUILD_DIR}/ll
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/llvm ${DEFAULT_CMAKE_FLAGS} ${LLVM_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/llvm
-)
-
-if(MSVC)
-  if(BUILD_MODE STREQUAL Release)
-    set(LLVM_HARVEST_COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/llvm/ ${HARVEST_TARGET}/llvm/ )
-  else()
-    set(LLVM_HARVEST_COMMAND
-      ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/llvm/lib/ ${HARVEST_TARGET}/llvm/debug/lib/ &&
-      ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/llvm/include/ ${HARVEST_TARGET}/llvm/debug/include/
-    )
-  endif()
-  ExternalProject_Add_Step(ll after_install
-    COMMAND ${LLVM_HARVEST_COMMAND}
-    DEPENDEES mkdir update patch download configure build install
-  )
-endif()

build_files/build_environment/cmake/lzma.cmake

@@ -1,32 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(LZMA_PATCH_CMD echo .)
-
-ExternalProject_Add(external_lzma
-  URL ${LZMA_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${LZMA_HASH}
-  PREFIX ${BUILD_DIR}/lzma
-  PATCH_COMMAND ${LZMA_PATCH_CMD}
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lzma/src/external_lzma/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/lzma
-    --disable-shared
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lzma/src/external_lzma/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lzma/src/external_lzma/ && make install
-  INSTALL_DIR ${LIBDIR}/lzma
-)

build_files/build_environment/cmake/numpy.cmake

@@ -1,66 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(MSVC)
-  if(BUILD_MODE STREQUAL Debug)
-    set(NUMPY_DIR_POSTFIX -pydebug)
-    set(NUMPY_ARCHIVE_POSTFIX d)
-    set(NUMPY_BUILD_OPTION --debug)
-  else()
-    set(NUMPY_DIR_POSTFIX)
-    set(NUMPY_ARCHIVE_POSTFIX)
-    set(NUMPY_BUILD_OPTION)
-  endif()
-endif()
-
-set(NUMPY_POSTFIX)
-
-if(WIN32)
-  set(NUMPY_INSTALL
-    ${CMAKE_COMMAND} -E copy_directory "${BUILD_DIR}/python/src/external_python/run/lib/site-packages/numpy/core/include/numpy" "${LIBDIR}/python/include/python${PYTHON_SHORT_VERSION}/numpy" &&
-    ${CMAKE_COMMAND} -E chdir "${BUILD_DIR}/numpy/src/external_numpy/build/lib.${PYTHON_ARCH2}-${PYTHON_SHORT_VERSION}${NUMPY_DIR_POSTFIX}"
-    ${CMAKE_COMMAND} -E tar "cfvz" "${LIBDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}_numpy_${NUMPY_SHORT_VERSION}${NUMPY_ARCHIVE_POSTFIX}.tar.gz" "."
-  )
-else()
-  set(NUMPY_INSTALL echo .)
-  set(NUMPY_PATCH echo .)
-endif()
-
-ExternalProject_Add(external_numpy
-  URL ${NUMPY_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${NUMPY_HASH}
-  PREFIX ${BUILD_DIR}/numpy
-  PATCH_COMMAND ${NUMPY_PATCH}
-  CONFIGURE_COMMAND ""
-  LOG_BUILD 1
-  BUILD_COMMAND ${PYTHON_BINARY} ${BUILD_DIR}/numpy/src/external_numpy/setup.py build ${NUMPY_BUILD_OPTION} install --old-and-unmanageable
-  INSTALL_COMMAND ${NUMPY_INSTALL}
-)
-
-if(WIN32)
-  ExternalProject_Add_Step(external_numpy after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}_numpy_${NUMPY_SHORT_VERSION}${NUMPY_ARCHIVE_POSTFIX}.tar.gz ${HARVEST_TARGET}/Release/python${PYTHON_SHORT_VERSION_NO_DOTS}_numpy_${NUMPY_SHORT_VERSION}${NUMPY_ARCHIVE_POSTFIX}.tar.gz
-      DEPENDEES install
-    )
-endif()
-
-add_dependencies(
-  external_numpy
-  Make_Python_Environment
-)

build_files/build_environment/cmake/ogg.cmake

@@ -1,32 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_ogg
-  URL ${OGG_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${OGG_HASH}
-  PREFIX ${BUILD_DIR}/ogg
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ogg/src/external_ogg/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/ogg --disable-shared --enable-static
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ogg/src/external_ogg/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ogg/src/external_ogg/ && make install
-  INSTALL_DIR ${LIBDIR}/ogg
-)
-
-if(MSVC)
-  set_target_properties(external_ogg PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/openal.cmake

@@ -1,67 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(BUILD_MODE STREQUAL Release)
-  set(OPENAL_EXTRA_ARGS
-    -DALSOFT_UTILS=OFF
-    -DALSOFT_NO_CONFIG_UTIL=ON
-    -DALSOFT_EXAMPLES=OFF
-    -DALSOFT_TESTS=OFF
-    -DALSOFT_CONFIG=OFF
-    -DALSOFT_HRTF_DEFS=OFF
-    -DALSOFT_INSTALL=ON
-    -DALSOFT_BACKEND_SNDIO=OFF
-  )
-
-  if(UNIX)
-    set(OPENAL_EXTRA_ARGS
-      ${OPENAL_EXTRA_ARGS}
-      -DLIBTYPE=STATIC
-    )
-  endif()
-
-  if(UNIX AND NOT APPLE)
-    # Ensure we have backends for playback.
-    set(OPENAL_EXTRA_ARGS
-      ${OPENAL_EXTRA_ARGS}
-      -DALSOFT_REQUIRE_ALSA=ON
-      -DALSOFT_REQUIRE_OSS=ON
-      -DALSOFT_REQUIRE_PULSEAUDIO=ON
-    )
-  endif()
-
-  ExternalProject_Add(external_openal
-    URL ${OPENAL_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH MD5=${OPENAL_HASH}
-    PREFIX ${BUILD_DIR}/openal
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openal ${DEFAULT_CMAKE_FLAGS} ${OPENAL_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/openal
-    PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/openal/src/external_openal < ${PATCH_DIR}/openal.diff
-  )
-
-  if(WIN32)
-    ExternalProject_Add_Step(external_openal after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openal/lib/openal32.lib ${HARVEST_TARGET}/openal/lib/openal32.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openal/bin/openal32.dll ${HARVEST_TARGET}/openal/lib/openal32.dll
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openal/include/ ${HARVEST_TARGET}/openal/include/
-      DEPENDEES install
-    )
-  endif()
-
-endif()

build_files/build_environment/cmake/opencollada.cmake

@@ -1,65 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(UNIX)
-  set(OPENCOLLADA_EXTRA_ARGS
-    -DLIBXML2_INCLUDE_DIR=${LIBDIR}/xml2/include/libxml2
-    -DLIBXML2_LIBRARIES=${LIBDIR}/xml2/lib/libxml2.a)
-endif()
-
-ExternalProject_Add(external_opencollada
-  URL ${OPENCOLLADA_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${OPENCOLLADA_HASH}
-  PREFIX ${BUILD_DIR}/opencollada
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -N -d ${BUILD_DIR}/opencollada/src/external_opencollada < ${PATCH_DIR}/opencollada.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/opencollada ${DEFAULT_CMAKE_FLAGS} ${OPENCOLLADA_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/opencollada
-)
-
-if(UNIX)
-  add_dependencies(
-    external_opencollada
-    external_xml2
-  )
-endif()
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_opencollada after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opencollada/ ${HARVEST_TARGET}/opencollada/
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_opencollada after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/buffer.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/buffer_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/ftoa.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/ftoa_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/GeneratedSaxParser.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/GeneratedSaxParser_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/MathMLSolver.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/MathMLSolver_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/OpenCOLLADABaseUtils.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/OpenCOLLADABaseUtils_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/OpenCOLLADAFramework.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/OpenCOLLADAFramework_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/OpenCOLLADASaxFrameworkLoader.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/OpenCOLLADASaxFrameworkLoader_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/OpenCOLLADAStreamWriter.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/OpenCOLLADAStreamWriter_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/pcre.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/pcre_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/UTF.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/UTF_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/xml.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/xml_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/opencolorio.cmake

@@ -1,112 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(OPENCOLORIO_EXTRA_ARGS
-  -DOCIO_BUILD_APPS=OFF
-  -DOCIO_BUILD_PYGLUE=OFF
-  -DOCIO_BUILD_NUKE=OFF
-  -DOCIO_USE_BOOST_PTR=OFF
-  -DOCIO_BUILD_STATIC=ON
-  -DOCIO_BUILD_SHARED=OFF
-  -DOCIO_BUILD_TRUELIGHT=OFF
-  -DOCIO_BUILD_DOCS=OFF
-  -DOCIO_BUILD_PYGLUE=OFF
-  -DOCIO_BUILD_JNIGLUE=OFF
-  -DOCIO_STATIC_JNIGLUE=OFF
-)
-
-if(WIN32)
-  set(OCIO_PATCH opencolorio_win.diff)
-  set(OPENCOLORIO_EXTRA_ARGS
-    ${OPENCOLORIO_EXTRA_ARGS}
-    -DOCIO_BUILD_TESTS=OFF
-    -DOCIO_USE_SSE=ON
-    -DOCIO_INLINES_HIDDEN=OFF
-    -DOCIO_PYGLUE_LINK=OFF
-    -DOCIO_PYGLUE_RESPECT_ABI=OFF
-    -DOCIO_PYGLUE_SONAME=OFF
-    -DOCIO_PYGLUE_LIB_PREFIX=OFF
-    -DUSE_EXTERNAL_TINYXML=ON
-    -DTINYXML_INCLUDE_DIR=${LIBDIR}/tinyxml/include
-    -DTINYXML_LIBRARY=${LIBDIR}/tinyxml/lib/tinyxml${libext}
-    -DUSE_EXTERNAL_YAML=ON
-    -DYAML_CPP_FOUND=ON
-    -DYAML_CPP_VERSION=${YAMLCPP_VERSION}
-    -DUSE_EXTERNAL_LCMS=ON
-    -DINC_1=${LIBDIR}/tinyxml/include
-    -DINC_2=${LIBDIR}/yamlcpp/include
-    #lie because ocio cmake is demanding boost even though it is not needed
-    -DYAML_CPP_VERSION=0.5.0
-  )
-else()
-  set(OCIO_PATCH opencolorio.diff)
-  set(OPENCOLORIO_EXTRA_ARGS
-    ${OPENCOLORIO_EXTRA_ARGS}
-  )
-endif()
-
-ExternalProject_Add(external_opencolorio
-  URL ${OPENCOLORIO_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${OPENCOLORIO_HASH}
-  PREFIX ${BUILD_DIR}/opencolorio
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -N -d ${BUILD_DIR}/opencolorio/src/external_opencolorio < ${PATCH_DIR}/${OCIO_PATCH}
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/opencolorio ${DEFAULT_CMAKE_FLAGS} ${OPENCOLORIO_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/opencolorio
-)
-
-if(NOT WIN32)
-  add_custom_command(
-    OUTPUT ${LIBDIR}/opencolorio/lib/libtinyxml.a
-    COMMAND cp ${BUILD_DIR}/opencolorio/src/external_opencolorio-build/ext/dist/lib/libtinyxml.a ${LIBDIR}/opencolorio/lib/libtinyxml.a
-    COMMAND cp ${BUILD_DIR}/opencolorio/src/external_opencolorio-build/ext/dist/lib/libyaml-cpp.a ${LIBDIR}/opencolorio/lib/libyaml-cpp.a
-  )
-  add_custom_target(external_opencolorio_extra ALL DEPENDS external_opencolorio ${LIBDIR}/opencolorio/lib/libtinyxml.a)
-endif()
-
-add_dependencies(
-  external_opencolorio
-  external_boost
-)
-
-if(WIN32)
-  add_dependencies(
-    external_opencolorio
-    external_tinyxml
-    external_yamlcpp
-
-  )
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_opencolorio after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opencolorio/include ${HARVEST_TARGET}/opencolorio/include
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opencolorio/lib/static ${HARVEST_TARGET}/opencolorio/lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/yamlcpp/lib/libyaml-cppmt.lib ${HARVEST_TARGET}/opencolorio/lib/libyaml-cpp.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tinyxml/lib/tinyxml.lib ${HARVEST_TARGET}/opencolorio/lib/tinyxml.lib
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_opencolorio after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencolorio/lib/static/Opencolorio.lib ${HARVEST_TARGET}/opencolorio/lib/OpencolorIO_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/yamlcpp/lib/libyaml-cppmtd.lib ${HARVEST_TARGET}/opencolorio/lib/libyaml-cpp_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tinyxml/lib/tinyxml.lib ${HARVEST_TARGET}/opencolorio/lib/tinyxml_d.lib
-      DEPENDEES install
-    )
-  endif()
-
-endif()

build_files/build_environment/cmake/openexr.cmake

@@ -1,78 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  set(OPENEXR_CMAKE_CXX_STANDARD_LIBRARIES "kernel32${LIBEXT} user32${LIBEXT} gdi32${LIBEXT} winspool${LIBEXT} shell32${LIBEXT} ole32${LIBEXT} oleaut32${LIBEXT} uuid${LIBEXT} comdlg32${LIBEXT} advapi32${LIBEXT} psapi${LIBEXT}")
-  set(OPENEXR_EXTRA_ARGS
-    -DCMAKE_CXX_STANDARD_LIBRARIES=${OPENEXR_CMAKE_CXX_STANDARD_LIBRARIES}
-    -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-    -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-    -DILMBASE_PACKAGE_PREFIX=${LIBDIR}/ilmbase
-    -DOPENEXR_BUILD_ILMBASE=On
-    -DOPENEXR_BUILD_OPENEXR=On
-    -DOPENEXR_BUILD_PYTHON_LIBS=Off
-    -DOPENEXR_BUILD_STATIC=On
-    -DOPENEXR_BUILD_SHARED=Off
-    -DOPENEXR_BUILD_TESTS=Off
-    -DOPENEXR_BUILD_VIEWERS=Off
-    -DOPENEXR_BUILD_UTILS=Off
-    -DOPENEXR_NAMESPACE_VERSIONING=Off
-  )
-  ExternalProject_Add(external_openexr
-    URL ${OPENEXR_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH MD5=${OPENEXR_HASH}
-    PREFIX ${BUILD_DIR}/openexr
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openexr ${DEFAULT_CMAKE_FLAGS} ${OPENEXR_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/openexr
-  )
-
-  ExternalProject_Add_Step(external_openexr after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openexr/lib ${HARVEST_TARGET}/openexr/lib
-    #libs have moved between versions, just duplicate it for now.
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openexr/lib ${LIBDIR}/ilmbase/lib
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openexr/include ${HARVEST_TARGET}/openexr/include
-    DEPENDEES install
-  )
-
-else()
-  set(OPENEXR_PKG_CONFIG_PATH ${LIBDIR}/zlib/share/pkgconfig)
-  set(OPENEXR_EXTRA_ARGS
-    --enable-static
-    --disable-shared
-    --enable-cxxstd=11
-    --with-ilmbase-prefix=${LIBDIR}/ilmbase
-    )
-
-  ExternalProject_Add(external_openexr
-    URL ${OPENEXR_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH MD5=${OPENEXR_HASH}
-    PREFIX ${BUILD_DIR}/openexr
-    CONFIGURE_COMMAND ${CONFIGURE_ENV} && export PKG_CONFIG_PATH=${OPENEXR_PKG_CONFIG_PATH} && cd ${BUILD_DIR}/openexr/src/external_openexr/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/openexr ${OPENEXR_EXTRA_ARGS}
-    BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openexr/src/external_openexr/ && make -j${MAKE_THREADS}
-    INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openexr/src/external_openexr/ && make install
-    INSTALL_DIR ${LIBDIR}/openexr
-  )
-endif()
-
-add_dependencies(
-  external_openexr
-  external_zlib
-  external_ilmbase
-)

build_files/build_environment/cmake/openimageio.cmake

@@ -1,152 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(BUILD_MODE STREQUAL Release)
-  set(OIIO_TOOLS ON)
-else()
-  set(OIIO_TOOLS OFF)
-endif()
-
-if(UNIX AND NOT APPLE)
-  # This causes linking to static pthread libraries which gives link errors.
-  # Since we manually specify library paths it should static link other libs.
-  set(OPENIMAGEIO_LINKSTATIC -DLINKSTATIC=OFF)
-else()
-  set(OPENIMAGEIO_LINKSTATIC -DLINKSTATIC=ON)
-endif()
-
-if(WIN32)
-  set(PNG_LIBNAME libpng16_static${LIBEXT})
-  set(OIIO_SIMD_FLAGS -DUSE_SIMD=sse2 -DOPJ_STATIC=1)
-  set(OPENJPEG_POSTFIX _msvc)
-else()
-  set(PNG_LIBNAME libpng${LIBEXT})
-  set(OIIO_SIMD_FLAGS)
-endif()
-
-if(WITH_WEBP)
-  set(WEBP_ARGS
-    -DWEBP_INCLUDE_DIR=${LIBDIR}/webp/include
-    -DWEBP_LIBRARY=${LIBDIR}/webp/lib/${LIBPREFIX}webp${LIBEXT}
-  )
-  set(WEBP_DEP external_webp)
-endif()
-
-if(MSVC)
-  set(OPENJPEG_FLAGS
-    -DOPENJPEG_HOME=${LIBDIR}/openjpeg_msvc
-    -DOPENJPEG_INCLUDE_DIR=${LIBDIR}/openjpeg_msvc/include/openjpeg-${OPENJPEG_SHORT_VERSION}
-    -DOPENJPEG_LIBRARY=${LIBDIR}/openjpeg_msvc/lib/openjp2${LIBEXT}
-    -DOPENJPEG_LIBRARY_DEBUG=${LIBDIR}/openjpeg_msvc/lib/openjp2${LIBEXT}
-  )
-else()
-  set(OPENJPEG_FLAGS
-    -DOPENJPEG_INCLUDE_DIR=${LIBDIR}/openjpeg/include/openjpeg-${OPENJPEG_SHORT_VERSION}
-    -DOPENJPEG_LIBRARY=${LIBDIR}/openjpeg/lib/${OPENJPEG_LIBRARY}
-  )
-endif()
-
-set(OPENIMAGEIO_EXTRA_ARGS
-  -DBUILDSTATIC=ON
-  ${OPENIMAGEIO_LINKSTATIC}
-  -DOPENEXR_INCLUDE_DIR=${LIBDIR}/openexr/include/openexr/
-  -DOPENEXR_ILMIMF_LIBRARIES=${LIBDIR}/openexr/lib/IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-  -DBoost_USE_MULTITHREADED=ON
-  -DBoost_USE_STATIC_LIBS=ON
-  -DBoost_USE_STATIC_RUNTIME=ON
-  -DBOOST_ROOT=${LIBDIR}/boost
-  -DBOOST_LIBRARYDIR=${LIBDIR}/boost/lib/
-  -DBoost_NO_SYSTEM_PATHS=ON
-  -OIIO_BUILD_CPP11=ON
-  -DUSE_OPENGL=OFF
-  -DUSE_TBB=OFF
-  -DUSE_FIELD3D=OFF
-  -DUSE_QT=OFF
-  -DUSE_PYTHON=OFF
-  -DUSE_GIF=OFF
-  -DUSE_OPENCV=OFF
-  -DUSE_OPENSSL=OFF
-  -DUSE_OPENJPEG=ON
-  -DUSE_FFMPEG=OFF
-  -DUSE_PTEX=OFF
-  -DUSE_FREETYPE=OFF
-  -DUSE_LIBRAW=OFF
-  -DUSE_PYTHON=OFF
-  -DUSE_PYTHON3=OFF
-  -DUSE_OCIO=OFF
-  -DUSE_WEBP=${WITH_WEBP}
-  -DOIIO_BUILD_TOOLS=${OIIO_TOOLS}
-  -DOIIO_BUILD_TESTS=OFF
-  -DBUILD_TESTING=OFF
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include
-  -DPNG_LIBRARY=${LIBDIR}/png/lib/${PNG_LIBNAME}
-  -DPNG_PNG_INCLUDE_DIR=${LIBDIR}/png/include
-  -DTIFF_LIBRARY=${LIBDIR}/tiff/lib/${LIBPREFIX}tiff${LIBEXT}
-  -DTIFF_INCLUDE_DIR=${LIBDIR}/tiff/include
-  -DJPEG_LIBRARY=${LIBDIR}/jpg/lib/${JPEG_LIBRARY}
-  -DJPEG_INCLUDE_DIR=${LIBDIR}/jpg/include
-  ${OPENJPEG_FLAGS}
-  -DOCIO_PATH=${LIBDIR}/opencolorio/
-  -DOpenEXR_USE_STATIC_LIBS=On
-  -DOPENEXR_HOME=${LIBDIR}/openexr/
-  -DILMBASE_INCLUDE_PATH=${LIBDIR}/ilmbase/
-  -DILMBASE_PACKAGE_PREFIX=${LIBDIR}/ilmbase/
-  -DILMBASE_INCLUDE_DIR=${LIBDIR}/ilmbase/include/
-  -DOPENEXR_HALF_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}Half${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_IMATH_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}Imath${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_ILMTHREAD_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}IlmThread${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_IEX_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}Iex${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_INCLUDE_DIR=${LIBDIR}/openexr/include/
-  -DOPENEXR_ILMIMF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DSTOP_ON_WARNING=OFF
-  ${WEBP_FLAGS}
-  ${OIIO_SIMD_FLAGS}
-)
-
-ExternalProject_Add(external_openimageio
-  URL ${OPENIMAGEIO_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${OPENIMAGEIO_HASH}
-  PREFIX ${BUILD_DIR}/openimageio
-  PATCH_COMMAND
-    ${PATCH_CMD} -p 0 -N -d ${BUILD_DIR}/openimageio/src/external_openimageio/src/include < ${PATCH_DIR}/openimageio_gdi.diff &&
-    ${PATCH_CMD} -p 1 -N -d ${BUILD_DIR}/openimageio/src/external_openimageio/ < ${PATCH_DIR}/openimageio_static_libs.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openimageio ${DEFAULT_CMAKE_FLAGS} ${OPENIMAGEIO_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/openimageio
-)
-
-add_dependencies(
-  external_openimageio
-  external_png external_zlib
-  external_ilmbase
-  external_openexr
-  external_jpeg
-  external_boost
-  external_tiff
-  external_opencolorio
-  external_openjpeg${OPENJPEG_POSTFIX}
-  ${WEBP_DEP}
-)
-if(NOT WIN32)
-  add_dependencies(
-    external_openimageio
-    external_opencolorio_extra
-  )
-endif()

build_files/build_environment/cmake/openjpeg.cmake

@@ -1,64 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-# Note the encoder/decoder may use png/tiff/lcms system libraries, but the
-# library itself does not depend on them, so should give no problems.
-
-set(OPENJPEG_EXTRA_ARGS -DBUILD_SHARED_LIBS=OFF)
-
-if(WIN32)
-  set(OPENJPEG_EXTRA_ARGS -G "MSYS Makefiles" -DBUILD_PKGCONFIG_FILES=On)
-else()
-  set(OPENJPEG_EXTRA_ARGS ${DEFAULT_CMAKE_FLAGS})
-endif()
-
-ExternalProject_Add(external_openjpeg
-  URL ${OPENJPEG_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${OPENJPEG_HASH}
-  PREFIX ${BUILD_DIR}/openjpeg
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build && ${CMAKE_COMMAND} ${OPENJPEG_EXTRA_ARGS} -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openjpeg -DBUILD_SHARED_LIBS=Off -DBUILD_THIRDPARTY=OFF ${BUILD_DIR}/openjpeg/src/external_openjpeg
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build/ && make install
-  INSTALL_DIR ${LIBDIR}/openjpeg
-)
-
-#on windows ffmpeg wants a mingw build, while oiio needs a msvc build
-if(MSVC)
-  set(OPENJPEG_EXTRA_ARGS ${DEFAULT_CMAKE_FLAGS})
-  ExternalProject_Add(external_openjpeg_msvc
-    URL ${OPENJPEG_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH SHA256=${OPENJPEG_HASH}
-    PREFIX ${BUILD_DIR}/openjpeg_msvc
-    CMAKE_ARGS ${OPENJPEG_EXTRA_ARGS} -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openjpeg_msvc -DBUILD_SHARED_LIBS=Off -DBUILD_THIRDPARTY=OFF
-    INSTALL_DIR ${LIBDIR}/openjpeg_msvc
-  )
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_openjpeg_msvc after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openjpeg_msvc/lib ${HARVEST_TARGET}/openjpeg/lib &&
-          ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openjpeg_msvc/include ${HARVEST_TARGET}/openjpeg/include
-      DEPENDEES install
-    )
-  endif()
-endif()
-
-set(OPENJPEG_LIBRARY libopenjp2${LIBEXT})
-if(MSVC)
-  set_target_properties(external_openjpeg PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/openmp.cmake

@@ -1,33 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-
-ExternalProject_Add(external_openmp
-  URL ${OPENMP_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${OPENMP_HASH}
-  PREFIX ${BUILD_DIR}/openmp
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openmp ${DEFAULT_CMAKE_FLAGS}
-  INSTALL_COMMAND cd ${BUILD_DIR}/openmp/src/external_openmp-build && install_name_tool -id @executable_path/../Resources/lib/libomp.dylib runtime/src/libomp.dylib && make install
-  INSTALL_DIR ${LIBDIR}/openmp
-)
-
-add_dependencies(
-  external_openmp
-  external_clang
-)

build_files/build_environment/cmake/opensubdiv.cmake

@@ -1,101 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(OPENSUBDIV_EXTRA_ARGS
-  -DNO_EXAMPLES=ON
-  -DNO_REGRESSION=ON
-  -DNO_PYTHON=ON
-  -DNO_MAYA=ON
-  -DNO_PTEX=ON
-  -DNO_DOC=ON
-  -DNO_CLEW=OFF
-  -DNO_OPENCL=OFF
-  -DNO_TUTORIALS=ON
-  -DGLEW_INCLUDE_DIR=${LIBDIR}/glew/include
-  -DGLEW_LIBRARY=${LIBDIR}/glew/lib/libGLEW${LIBEXT}
-  -DGLFW_INCLUDE_DIR=${LIBDIR}/glfw/include
-  -DGLFW_LIBRARIES=${LIBDIR}/glfw/lib/glfw3${LIBEXT}
-)
-
-if(WIN32)
-  set(OPENSUBDIV_EXTRA_ARGS
-    ${OPENSUBDIV_EXTRA_ARGS}
-    -DTBB_INCLUDE_DIR=${LIBDIR}/tbb/include
-    -DTBB_LIBRARIES=${LIBDIR}/tbb/lib/tbb_static.lib
-    -DCLEW_INCLUDE_DIR=${LIBDIR}/clew/include/CL
-    -DCLEW_LIBRARY=${LIBDIR}/clew/lib/clew${LIBEXT}
-    -DCUEW_INCLUDE_DIR=${LIBDIR}/cuew/include
-    -DCUEW_LIBRARY=${LIBDIR}/cuew/lib/cuew${LIBEXT}
-    -DCMAKE_EXE_LINKER_FLAGS_RELEASE=libcmt.lib
-  )
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(OPENSUBDIV_EXTRA_ARGS
-      ${OPENSUBDIV_EXTRA_ARGS}
-      -DNO_CUDA=OFF
-    )
-  else()
-    set(OPENSUBDIV_EXTRA_ARGS
-      ${OPENSUBDIV_EXTRA_ARGS}
-      -DNO_CUDA=ON
-    )
-  endif()
-
-else()
-  set(OPENSUBDIV_EXTRA_ARGS
-    ${OPENSUBDIV_EXTRA_ARGS}
-    -DNO_CUDA=ON
-    -DCUEW_INCLUDE_DIR=${LIBDIR}/cuew/include
-    -DCLEW_INCLUDE_DIR=${LIBDIR}/clew/include/CL
-    -DCLEW_LIBRARY=${LIBDIR}/clew/lib/static/${LIBPREFIX}clew${LIBEXT}
-  )
-endif()
-
-ExternalProject_Add(external_opensubdiv
-  URL ${OPENSUBDIV_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${OPENSUBDIV_Hash}
-  PREFIX ${BUILD_DIR}/opensubdiv
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/opensubdiv -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${OPENSUBDIV_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/opensubdiv
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_opensubdiv after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opensubdiv/lib ${HARVEST_TARGET}/opensubdiv/lib
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opensubdiv/include ${HARVEST_TARGET}/opensubdiv/include
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_opensubdiv after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opensubdiv/lib/osdCPU.lib ${HARVEST_TARGET}/opensubdiv/lib/osdCPU_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opensubdiv/lib/osdGPU.lib ${HARVEST_TARGET}/opensubdiv/lib/osdGPU_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()
-
-add_dependencies(
-  external_opensubdiv
-  external_glew
-  external_glfw
-  external_clew
-  external_cuew
-  external_tbb
-)

build_files/build_environment/cmake/openvdb.cmake

@@ -1,102 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(BUILD_MODE STREQUAL Debug)
-  set(BLOSC_POST _d)
-endif()
-
-set(OPENVDB_EXTRA_ARGS
-  -DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-  -DBoost_USE_MULTITHREADED=ON
-  -DBoost_USE_STATIC_LIBS=ON
-  -DBoost_USE_STATIC_RUNTIME=ON
-  -DBOOST_ROOT=${LIBDIR}/boost
-  -DBoost_NO_SYSTEM_PATHS=ON
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  -DBLOSC_INCLUDE_DIR=${LIBDIR}/blosc/include/
-  -DBLOSC_blosc_LIBRARY=${LIBDIR}/blosc/lib/libblosc${BLOSC_POST}${LIBEXT}
-  -DOPENVDB_ENABLE_3_ABI_COMPATIBLE=OFF
-  -DOPENVDB_BUILD_UNITTESTS=Off
-  -DOPENVDB_BUILD_PYTHON_MODULE=Off
-  -DGLEW_LOCATION=${LIBDIR}/glew/
-  -DBLOSC_LOCATION=${LIBDIR}/blosc/
-  -DTBB_LOCATION=${LIBDIR}/tbb/
-  -DTBB_ROOT=${LIBDIR}/tbb/
-  -DOPENEXR_LOCATION=${LIBDIR}/openexr
-  -DILMBASE_LOCATION=${LIBDIR}/ilmbase
-  -DIlmbase_HALF_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}Half${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DIlmbase_IEX_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}Iex${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DIlmbase_ILMTHREAD_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}IlmThread${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DOpenexr_ILMIMF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DTBB_LIBRARYDIR=${LIBDIR}/tbb/lib
-  -DTbb_TBB_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}tbb_static${LIBEXT}
-  -DTBB_LIBRARY_PATH=${LIBDIR}/tbb/lib
-)
-
-if(WIN32)
-  # Namespaces seem to be buggy and cause linker errors due to things not
-  # being in the correct namespace
-  # needs to link pthreads due to it being a blosc dependency
-  set(OPENVDB_EXTRA_ARGS ${OPENVDB_EXTRA_ARGS}
-    -DOPENEXR_NAMESPACE_VERSIONING=OFF
-    -DEXTRA_LIBS:FILEPATH=${LIBDIR}/pthreads/lib/pthreadVC3.lib
-  )
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "4")
-    set(OPENVDB_EXTRA_ARGS ${OPENVDB_EXTRA_ARGS}
-      -DCMAKE_SHARED_LINKER_FLAGS="/safeseh:no"
-      -DCMAKE_EXE_LINKER_FLAGS="/safeseh:no"
-    )
-  endif()
-endif()
-
-ExternalProject_Add(openvdb
-  URL ${OPENVDB_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${OPENVDB_HASH}
-  PREFIX ${BUILD_DIR}/openvdb
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/openvdb/src/openvdb < ${PATCH_DIR}/openvdb.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openvdb ${DEFAULT_CMAKE_FLAGS} ${OPENVDB_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/openvdb
-)
-
-add_dependencies(
-  openvdb
-  external_tbb
-  external_boost
-  external_ilmbase
-  external_openexr
-  external_zlib
-  external_blosc
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(openvdb after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openvdb/include ${HARVEST_TARGET}/openvdb/include
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openvdb/lib/libopenvdb.lib ${HARVEST_TARGET}/openvdb/lib/openvdb.lib
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(openvdb after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openvdb/lib/libopenvdb.lib ${HARVEST_TARGET}/openvdb/lib/openvdb_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/options.cmake

@@ -1,218 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  option(ENABLE_MINGW64 "Enable building of ffmpeg/iconv/libsndfile/lapack/fftw3 by installing mingw64" ON)
-endif()
-option(WITH_WEBP "Enable building of oiio with webp support" OFF)
-option(WITH_EMBREE "Enable building of Embree" OFF)
-set(MAKE_THREADS 1 CACHE STRING "Number of threads to run make with")
-
-if(NOT BUILD_MODE)
-  set(BUILD_MODE "Release")
-  message(STATUS "Build type not specified: defaulting to a release build.")
-endif()
-message("BuildMode = ${BUILD_MODE}")
-
-if(BUILD_MODE STREQUAL "Debug")
-  set(LIBDIR ${CMAKE_CURRENT_BINARY_DIR}/Debug)
-else(BUILD_MODE STREQUAL "Debug")
-  set(LIBDIR ${CMAKE_CURRENT_BINARY_DIR}/Release)
-endif()
-
-option(DOWNLOAD_DIR "Path for downloaded files" ${CMAKE_CURRENT_SOURCE_DIR}/downloads)
-file(TO_CMAKE_PATH ${DOWNLOAD_DIR} DOWNLOAD_DIR)
-set(PATCH_DIR ${CMAKE_CURRENT_SOURCE_DIR}/patches)
-set(BUILD_DIR ${CMAKE_CURRENT_BINARY_DIR}/build)
-
-message("LIBDIR = ${LIBDIR}")
-message("DOWNLOAD_DIR = ${DOWNLOAD_DIR}")
-message("PATCH_DIR = ${PATCH_DIR}")
-message("BUILD_DIR = ${BUILD_DIR}")
-
-if(WIN32)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(PATCH_CMD ${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/patch.exe)
-  else()
-    set(PATCH_CMD ${DOWNLOAD_DIR}/mingw/mingw32/msys/1.0/bin/patch.exe)
-  endif()
-  set(LIBEXT ".lib")
-  set(LIBPREFIX "")
-
-  # For OIIO and OSL
-  set(COMMON_DEFINES /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS)
-
-  if(MSVC_VERSION GREATER 1909)
-    set(COMMON_MSVC_FLAGS "/Wv:18") #some deps with warnings as error aren't quite ready for dealing with the new 2017 warnings.
-  endif()
-  set(COMMON_MSVC_FLAGS "${COMMON_MSVC_FLAGS} /bigobj")
-  if(WITH_OPTIMIZED_DEBUG)
-    set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MTd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  else()
-    set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MTd ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /D_DEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  endif()
-  set(BLENDER_CMAKE_C_FLAGS_MINSIZEREL "/MT ${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  set(BLENDER_CMAKE_C_FLAGS_RELEASE "/MT ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  set(BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO "/MT ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-
-  if(WITH_OPTIMIZED_DEBUG)
-    set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/MTd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  else()
-    set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/D_DEBUG /D PLATFORM_WINDOWS /MTd  ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  endif()
-  set(BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL "/MT /${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG  /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  set(BLENDER_CMAKE_CXX_FLAGS_RELEASE "/MT ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  set(BLENDER_CMAKE_CXX_FLAGS_RELWITHDEBINFO "/MT ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-
-  set(PLATFORM_FLAGS)
-  set(PLATFORM_CXX_FLAGS)
-  set(PLATFORM_CMAKE_FLAGS)
-
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(MINGW_PATH ${DOWNLOAD_DIR}/mingw/mingw64)
-    set(MINGW_SHELL ming64sh.cmd)
-    set(PERL_SHELL ${DOWNLOAD_DIR}/perl/portableshell.bat)
-    set(MINGW_HOST x86_64-w64-mingw32)
-  else()
-    set(MINGW_PATH ${DOWNLOAD_DIR}/mingw/mingw32)
-    set(MINGW_SHELL ming32sh.cmd)
-    set(PERL_SHELL ${DOWNLOAD_DIR}/perl32/portableshell.bat)
-    set(MINGW_HOST i686-w64-mingw32)
-  endif()
-
-  set(CONFIGURE_ENV
-    cd ${MINGW_PATH} &&
-    call ${MINGW_SHELL} &&
-    call ${PERL_SHELL} &&
-    set path &&
-    set CFLAGS=-g &&
-    set LDFLAGS=-Wl,--as-needed -static-libgcc
-  )
-
-  set(CONFIGURE_ENV_NO_PERL
-    cd ${MINGW_PATH} &&
-    call ${MINGW_SHELL} &&
-    set path &&
-    set CFLAGS=-g &&
-    set LDFLAGS=-Wl,--as-needed -static-libgcc
-  )
-
-  set(CONFIGURE_COMMAND sh ./configure)
-  set(CONFIGURE_COMMAND_NO_TARGET ${CONFIGURE_COMMAND})
-else()
-  set(PATCH_CMD patch)
-  set(LIBEXT ".a")
-  set(LIBPREFIX "lib")
-
-  if(APPLE)
-    # Let's get the current Xcode dir, to support xcode-select
-    execute_process(
-      COMMAND xcode-select --print-path
-      OUTPUT_VARIABLE XCODE_DEV_PATH OUTPUT_STRIP_TRAILING_WHITESPACE
-    )
-    set(OSX_ARCHITECTURES x86_64)
-    set(OSX_DEPLOYMENT_TARGET 10.11)
-    set(OSX_SYSROOT ${XCODE_DEV_PATH}/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk)
-
-    set(PLATFORM_CFLAGS "-isysroot ${OSX_SYSROOT} -mmacosx-version-min=${OSX_DEPLOYMENT_TARGET}")
-    set(PLATFORM_CXXFLAGS "-isysroot ${OSX_SYSROOT} -mmacosx-version-min=${OSX_DEPLOYMENT_TARGET} -std=c++11 -stdlib=libc++")
-    set(PLATFORM_LDFLAGS "-isysroot ${OSX_SYSROOT} -mmacosx-version-min=${OSX_DEPLOYMENT_TARGET}")
-    set(PLATFORM_BUILD_TARGET --build=x86_64-apple-darwin15.0.0) # OS X 10.11
-    set(PLATFORM_CMAKE_FLAGS
-      -DCMAKE_OSX_ARCHITECTURES:STRING=${OSX_ARCHITECTURES}
-      -DCMAKE_OSX_DEPLOYMENT_TARGET:STRING=${OSX_DEPLOYMENT_TARGET}
-      -DCMAKE_OSX_SYSROOT:PATH=${OSX_SYSROOT}
-    )
-  else()
-    set(PLATFORM_CFLAGS "-fPIC")
-    set(PLATFORM_CXXFLAGS "-std=c++11 -fPIC")
-    set(PLATFORM_LDFLAGS)
-    set(PLATFORM_BUILD_TARGET)
-    set(PLATFORM_CMAKE_FLAGS -DCMAKE_INSTALL_LIBDIR=lib)
-  endif()
-
-  if(WITH_OPTIMIZED_DEBUG)
-    set(BLENDER_CMAKE_C_FLAGS_DEBUG "-O2 -DNDEBUG ${PLATFORM_CFLAGS}")
-  else()
-    set(BLENDER_CMAKE_C_FLAGS_DEBUG "-g ${PLATFORM_CFLAGS}")
-  endif()
-  set(BLENDER_CMAKE_C_FLAGS_MINSIZEREL "-Os -DNDEBUG ${PLATFORM_CFLAGS}")
-  set(BLENDER_CMAKE_C_FLAGS_RELEASE "-O2 -DNDEBUG ${PLATFORM_CFLAGS}")
-  set(BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO "-O2 -g -DNDEBUG ${PLATFORM_CFLAGS}")
-
-  if(WITH_OPTIMIZED_DEBUG)
-    set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "-O2 -DNDEBUG ${PLATFORM_CXXFLAGS}")
-  else()
-    set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "-g ${PLATFORM_CXXFLAGS}")
-  endif()
-
-  set(BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL "-Os -DNDEBUG ${PLATFORM_CXXFLAGS}")
-  set(BLENDER_CMAKE_CXX_FLAGS_RELEASE "-O2 -DNDEBUG ${PLATFORM_CXXFLAGS}")
-  set(BLENDER_CMAKE_CXX_FLAGS_RELWITHDEBINFO "-O2 -g -DNDEBUG ${PLATFORM_CXXFLAGS}")
-
-  set(CONFIGURE_ENV
-    export MACOSX_DEPLOYMENT_TARGET=${OSX_DEPLOYMENT_TARGET} &&
-    export CFLAGS=${PLATFORM_CFLAGS} &&
-    export CXXFLAGS=${PLATFORM_CXXFLAGS} &&
-    export LDFLAGS=${PLATFORM_LDFLAGS}
-  )
-  set(CONFIGURE_ENV_NO_PERL ${CONFIGURE_ENV})
-  set(CONFIGURE_COMMAND ./configure ${PLATFORM_BUILD_TARGET})
-  set(CONFIGURE_COMMAND_NO_TARGET ./configure)
-endif()
-
-set(DEFAULT_CMAKE_FLAGS
-  -DCMAKE_BUILD_TYPE=${BUILD_MODE}
-  -DCMAKE_C_FLAGS_DEBUG=${BLENDER_CMAKE_C_FLAGS_DEBUG}
-  -DCMAKE_C_FLAGS_MINSIZEREL=${BLENDER_CMAKE_C_FLAGS_MINSIZEREL}
-  -DCMAKE_C_FLAGS_RELEASE=${BLENDER_CMAKE_C_FLAGS_RELEASE}
-  -DCMAKE_C_FLAGS_RELWITHDEBINFO=${BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO}
-  -DCMAKE_CXX_FLAGS_DEBUG=${BLENDER_CMAKE_CXX_FLAGS_DEBUG}
-  -DCMAKE_CXX_FLAGS_MINSIZEREL=${BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL}
-  -DCMAKE_CXX_FLAGS_RELEASE=${BLENDER_CMAKE_CXX_FLAGS_RELEASE}
-  -DCMAKE_CXX_FLAGS_RELWITHDEBINFO=${CMAKE_CXX_FLAGS_RELWITHDEBINFO}
-  ${PLATFORM_CMAKE_FLAGS}
-)
-
-if(WIN32)
-  #we need both flavors to build the thumbnail dlls
-  if(MSVC12)
-    set(GENERATOR_32 "Visual Studio 12 2013")
-    set(GENERATOR_64 "Visual Studio 12 2013 Win64")
-  elseif(MSVC14)
-    set(GENERATOR_32 "Visual Studio 14 2015")
-    set(GENERATOR_64 "Visual Studio 14 2015 Win64")
-  endif()
-endif()
-
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Debug)
-    set(ZLIB_LIBRARY zlibstaticd${LIBEXT})
-  else()
-    set(ZLIB_LIBRARY zlibstatic${LIBEXT})
-  endif()
-else()
-  set(ZLIB_LIBRARY libz${LIBEXT})
-endif()
-
-if(MSVC)
-  set_property(GLOBAL PROPERTY USE_FOLDERS ON)
-endif()
-
-set(CMAKE_INSTALL_MESSAGE LAZY)

build_files/build_environment/cmake/osl.cmake

@@ -1,140 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  set(OSL_CMAKE_CXX_STANDARD_LIBRARIES "kernel32${LIBEXT} user32${LIBEXT} gdi32${LIBEXT} winspool${LIBEXT} shell32${LIBEXT} ole32${LIBEXT} oleaut32${LIBEXT} uuid${LIBEXT} comdlg32${LIBEXT} advapi32${LIBEXT} psapi${LIBEXT}")
-  set(OSL_FLEX_BISON -DFLEX_EXECUTABLE=${LIBDIR}/flexbison/win_flex.exe -DFLEX_EXTRA_OPTIONS="--wincompat" -DBISON_EXECUTABLE=${LIBDIR}/flexbison/win_bison.exe)
-  set(OSL_OPENIMAGEIO_LIBRARY "${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO${LIBEXT};${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO_Util${LIBEXT};${LIBDIR}/png/lib/libpng16${LIBEXT};${LIBDIR}/jpg/lib/${LIBPREFIX}jpeg${LIBEXT};${LIBDIR}/tiff/lib/${LIBPREFIX}tiff${LIBEXT};${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}")
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "4")
-    set(OSL_SIMD_FLAGS -DOIIO_NOSIMD=1 -DOIIO_SIMD=0)
-  else()
-    set(OSL_SIMD_FLAGS -DOIIO_NOSIMD=1 -DOIIO_SIMD=sse2)
-  endif()
-  SET(OSL_PLATFORM_FLAGS -DLINKSTATIC=ON)
-else()
-  set(OSL_CMAKE_CXX_STANDARD_LIBRARIES)
-  set(OSL_FLEX_BISON)
-  set(OSL_OPENIMAGEIO_LIBRARY "${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO${LIBEXT};${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO_Util${LIBEXT};${LIBDIR}/png/lib/${LIBPREFIX}png16${LIBEXT};${LIBDIR}/jpg/lib/${LIBPREFIX}jpeg${LIBEXT};${LIBDIR}/tiff/lib/${LIBPREFIX}tiff${LIBEXT};${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}")
-  SET(OSL_PLATFORM_FLAGS)
-endif()
-
-set(OSL_ILMBASE_CUSTOM_LIBRARIES "${LIBDIR}/ilmbase/lib/Imath${ILMBASE_VERSION_POSTFIX}.lib^^${LIBDIR}/ilmbase/lib/Half{ILMBASE_VERSION_POSTFIX}.lib^^${LIBDIR}/ilmbase/lib/IlmThread${ILMBASE_VERSION_POSTFIX}.lib^^${LIBDIR}/ilmbase/lib/Iex${ILMBASE_VERSION_POSTFIX}.lib")
-set(OSL_LLVM_LIBRARY "${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMAnalysis${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMAsmParser${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMAsmPrinter${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMBitReader${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMBitWriter${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMCodeGen${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMCore${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMDebugInfo${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMExecutionEngine${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMInstCombine${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMInstrumentation${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMInterpreter${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMJIT${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMLinker${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMMC${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMMCDisassembler${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMMCJIT${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMMCParser${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMObject${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMRuntimeDyld${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMScalarOpts${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMSelectionDAG${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMSupport${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMTableGen${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMTarget${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMTransformUtils${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMVectorize${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMX86AsmParser${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMX86AsmPrinter${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMX86CodeGen${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMX86Desc${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMX86Disassembler${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMX86Info${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMX86Utils${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMipa${LIBEXT};${LIBDIR}/llvm/lib/${LIBPREFIX}LLVMipo${LIBEXT}")
-
-set(OSL_EXTRA_ARGS
-  -DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-  -DBoost_USE_MULTITHREADED=ON
-  -DBoost_USE_STATIC_LIBS=ON
-  -DBoost_USE_STATIC_RUNTIME=ON
-  -DBOOST_ROOT=${LIBDIR}/boost
-  -DBOOST_LIBRARYDIR=${LIBDIR}/boost/lib/
-  -DBoost_NO_SYSTEM_PATHS=ON
-  -DLLVM_DIRECTORY=${LIBDIR}/llvm
-  -DLLVM_INCLUDES=${LIBDIR}/llvm/include
-  -DLLVM_LIB_DIR=${LIBDIR}/llvm/lib
-  -DLLVM_VERSION=3.4
-  -DLLVM_LIBRARY=${OSL_LLVM_LIBRARY}
-  -DOPENEXR_HOME=${LIBDIR}/openexr/
-  -DILMBASE_HOME=${LIBDIR}/ilmbase/
-  -DILMBASE_INCLUDE_DIR=${LIBDIR}/ilmbase/include/
-  -DOPENEXR_HALF_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}Half${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_IMATH_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}Imath${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_ILMTHREAD_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}IlmThread${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_IEX_LIBRARY=${LIBDIR}/ilmbase/lib/${LIBPREFIX}Iex${ILMBASE_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_INCLUDE_DIR=${LIBDIR}/openexr/include/
-  -DOPENEXR_ILMIMF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOSL_BUILD_TESTS=OFF
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  -DOPENIMAGEIOHOME=${LIBDIR}/openimageio/
-  -DOPENIMAGEIO_LIBRARY=${OSL_OPENIMAGEIO_LIBRARY}
-  -DOPENIMAGEIO_INCLUDES=${LIBDIR}/openimageio/include
-  ${OSL_FLEX_BISON}
-  -DCMAKE_CXX_STANDARD_LIBRARIES=${OSL_CMAKE_CXX_STANDARD_LIBRARIES}
-  -DBUILDSTATIC=ON
-  ${OSL_PLATFORM_FLAGS}
-  -DOSL_BUILD_PLUGINS=Off
-  -DSTOP_ON_WARNING=OFF
-  -DUSE_LLVM_BITCODE=OFF
-  -DUSE_PARTIO=OFF
-  ${OSL_SIMD_FLAGS}
-  -DPARTIO_LIBRARIES=
-)
-
-if(WIN32)
-  set(OSL_EXTRA_ARGS
-    ${OSL_EXTRA_ARGS}
-    -DPUGIXML_HOME=${LIBDIR}/pugixml
-  )
-elseif(APPLE)
-  # Make symbol hiding consistent with OIIO which defaults to OFF,
-  # avoids linker warnings on macOS
-  set(OSL_EXTRA_ARGS
-    ${OSL_EXTRA_ARGS}
-    -DHIDE_SYMBOLS=OFF
-  )
-endif()
-
-ExternalProject_Add(external_osl
-  URL ${OSL_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  LIST_SEPARATOR ^^
-  URL_HASH MD5=${OSL_HASH}
-  PREFIX ${BUILD_DIR}/osl
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/osl/src/external_osl < ${PATCH_DIR}/osl.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/osl -DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE} ${DEFAULT_CMAKE_FLAGS} ${OSL_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/osl
-)
-
-add_dependencies(
-  external_osl
-  external_boost
-  ll
-  external_clang
-  external_ilmbase
-  external_openexr
-  external_zlib
-  external_flexbison
-  external_openimageio
-)
-
-if(UNIX AND NOT APPLE)
-  # Rely on PugiXML compiled with OpenImageIO
-else()
-  add_dependencies(
-    external_osl
-    external_pugixml
-  )
-endif()
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_osl after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/osl/ ${HARVEST_TARGET}/osl
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_osl after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/osl/lib/oslcomp.lib ${HARVEST_TARGET}/osl/lib/oslcomp_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/osl/lib/oslexec.lib ${HARVEST_TARGET}/osl/lib/oslexec_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/osl/lib/oslquery.lib ${HARVEST_TARGET}/osl/lib/oslquery_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/png.cmake

@@ -1,44 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(PNG_EXTRA_ARGS
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  -DPNG_STATIC=ON
-)
-
-ExternalProject_Add(external_png
-  URL ${PNG_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${PNG_HASH}
-  PREFIX ${BUILD_DIR}/png
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/png ${DEFAULT_CMAKE_FLAGS} ${PNG_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/png
-)
-
-add_dependencies(
-  external_png
-  external_zlib
-)
-
-if(WIN32 AND BUILD_MODE STREQUAL Debug)
-  ExternalProject_Add_Step(external_png after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/png/lib/libpng16_staticd${LIBEXT} ${LIBDIR}/png/lib/libpng16${LIBEXT}
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/pthreads.cmake

@@ -1,53 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-
-    if(MSVC14) # vs2015 has timespec
-      set(PTHREAD_CPPFLAGS "/I. /DHAVE_CONFIG_H /D_TIMESPEC_DEFINED ")
-    else() # everything before doesn't
-      set(PTHREAD_CPPFLAGS "/I. /DHAVE_CONFIG_H ")
-    endif()
-
-    set(PTHREADS_BUILD cd ${BUILD_DIR}/pthreads/src/external_pthreads/ && cd && nmake VC-static /e CPPFLAGS=${PTHREAD_CPPFLAGS} /e XLIBS=/NODEFAULTLIB:msvcr)
-
-    ExternalProject_Add(external_pthreads
-      URL ${PTHREADS_URI}
-      DOWNLOAD_DIR ${DOWNLOAD_DIR}
-      URL_HASH MD5=${PTHREADS_HASH}
-      PREFIX ${BUILD_DIR}/pthreads
-      CONFIGURE_COMMAND echo .
-      BUILD_COMMAND ${PTHREADS_BUILD}
-      INSTALL_COMMAND COMMAND
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/libpthreadVC3${LIBEXT} ${LIBDIR}/pthreads/lib/pthreadVC3${LIBEXT} &&
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/pthread.h ${LIBDIR}/pthreads/inc/pthread.h &&
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/sched.h ${LIBDIR}/pthreads/inc/sched.h &&
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/semaphore.h ${LIBDIR}/pthreads/inc/semaphore.h &&
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/_ptw32.h ${LIBDIR}/pthreads/inc/_ptw32.h
-      INSTALL_DIR ${LIBDIR}/pthreads
-    )
-
-    if(BUILD_MODE STREQUAL Release)
-      ExternalProject_Add_Step(external_pthreads after_install
-        COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/pthreads/inc/ ${HARVEST_TARGET}/pthreads/include/
-        COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/pthreads/lib/ ${HARVEST_TARGET}/pthreads/lib
-        DEPENDEES install
-      )
-    endif()
-
-endif()

build_files/build_environment/cmake/pugixml.cmake

@@ -1,43 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(PUGIXML_EXTRA_ARGS
-)
-
-ExternalProject_Add(external_pugixml
-  URL ${PUGIXML_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${PUGIXML_HASH}
-  PREFIX ${BUILD_DIR}/pugixml
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/pugixml ${DEFAULT_CMAKE_FLAGS} ${PUGIXML_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/pugixml
-)
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_pugixml after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/pugixml/lib/pugixml.lib ${HARVEST_TARGET}/osl/lib/pugixml.lib
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_pugixml after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/pugixml/lib/pugixml.lib ${HARVEST_TARGET}/osl/lib/pugixml_d.lib
-      DEPENDEES install
-    )
-  endif() 
-endif()

build_files/build_environment/cmake/python.cmake

@@ -1,181 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(PYTHON_POSTFIX)
-if(BUILD_MODE STREQUAL Debug)
-  set(PYTHON_POSTFIX _d)
-endif()
-
-if(WIN32)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(SSL_POSTFIX -x64)
-  else()
-    set(SSL_POSTFIX)
-  endif()
-
-  set(PYTHON_BINARY ${BUILD_DIR}/python/src/external_python/run/python${PYTHON_POSTFIX}.exe)
-
-  macro(cmake_to_dos_path MsysPath ResultingPath)
-    string(REPLACE "/" "\\" ${ResultingPath} "${MsysPath}")
-  endmacro()
-
-  set(PYTHON_EXTERNALS_FOLDER ${BUILD_DIR}/python/src/external_python/externals)
-  set(DOWNLOADS_EXTERNALS_FOLDER ${DOWNLOAD_DIR}/externals)
-
-  cmake_to_dos_path(${PYTHON_EXTERNALS_FOLDER} PYTHON_EXTERNALS_FOLDER_DOS)
-  cmake_to_dos_path(${DOWNLOADS_EXTERNALS_FOLDER} DOWNLOADS_EXTERNALS_FOLDER_DOS)
-
-  message("Python externals = ${PYTHON_EXTERNALS_FOLDER}")
-  message("Python externals_dos = ${PYTHON_EXTERNALS_FOLDER_DOS}")
-  message("Python DOWNLOADS_EXTERNALS_FOLDER = ${DOWNLOADS_EXTERNALS_FOLDER}")
-  message("Python DOWNLOADS_EXTERNALS_FOLDER_DOS = ${DOWNLOADS_EXTERNALS_FOLDER_DOS}")
-
-  ExternalProject_Add(external_python
-    URL ${PYTHON_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH MD5=${PYTHON_HASH}
-    PREFIX ${BUILD_DIR}/python
-    PATCH_COMMAND
-      echo mklink /D "${PYTHON_EXTERNALS_FOLDER_DOS}" "${DOWNLOADS_EXTERNALS_FOLDER_DOS}" &&
-      mklink /D "${PYTHON_EXTERNALS_FOLDER_DOS}" "${DOWNLOADS_EXTERNALS_FOLDER_DOS}"
-    CONFIGURE_COMMAND ""
-    BUILD_COMMAND cd ${BUILD_DIR}/python/src/external_python/pcbuild/ && set IncludeTkinter=false && call build.bat -e -p ${PYTHON_ARCH} -c ${BUILD_MODE}
-    INSTALL_COMMAND COMMAND
-      ${CMAKE_COMMAND} -E copy ${PYTHON_OUTPUTDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.dll ${LIBDIR}/python/lib/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.dll &&
-      ${CMAKE_COMMAND} -E copy ${PYTHON_OUTPUTDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.pdb ${LIBDIR}/python/lib/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.pdb &&
-      ${CMAKE_COMMAND} -E copy ${PYTHON_OUTPUTDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib ${LIBDIR}/python/lib/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib &&
-      ${CMAKE_COMMAND} -E copy ${PYTHON_OUTPUTDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.exp ${LIBDIR}/python/lib/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.exp &&
-      ${CMAKE_COMMAND} -E copy_directory ${BUILD_DIR}/python/src/external_python/include ${LIBDIR}/python/include/Python${PYTHON_SHORT_VERSION} &&
-      ${CMAKE_COMMAND} -E copy "${BUILD_DIR}/python/src/external_python/PC/pyconfig.h" ${LIBDIR}/python/include/Python${PYTHON_SHORT_VERSION}/pyconfig.h
-  )
-  message("PythinRedist = ${BUILD_DIR}/python/src/external_python/redist")
-  message("POutput = ${PYTHON_OUTPUTDIR}")
-else()
-  if(APPLE)
-    # disable functions that can be in 10.13 sdk but aren't available on 10.9 target
-    set(PYTHON_FUNC_CONFIGS
-      export ac_cv_func_futimens=no &&
-      export ac_cv_func_utimensat=no &&
-      export ac_cv_func_basename_r=no &&
-      export ac_cv_func_clock_getres=no &&
-      export ac_cv_func_clock_gettime=no &&
-      export ac_cv_func_clock_settime=no &&
-      export ac_cv_func_dirname_r=no &&
-      export ac_cv_func_getentropy=no &&
-      export ac_cv_func_mkostemp=no &&
-      export ac_cv_func_mkostemps=no &&
-      export ac_cv_func_timingsafe_bcmp=no)
-    set(PYTHON_CONFIGURE_ENV ${CONFIGURE_ENV} && ${PYTHON_FUNC_CONFIGS})
-    set(PYTHON_BINARY ${BUILD_DIR}/python/src/external_python/python.exe)
-  else()
-    set(PYTHON_CONFIGURE_ENV ${CONFIGURE_ENV})
-    set(PYTHON_BINARY ${BUILD_DIR}/python/src/external_python/python)
-  endif()
-
-  set(PYTHON_CONFIGURE_EXTRA_ARGS "--with-openssl=${LIBDIR}/ssl")
-  set(PYTHON_CFLAGS "-I${LIBDIR}/sqlite/include -I${LIBDIR}/bzip2/include -I${LIBDIR}/lzma/include -I${LIBDIR}/zlib/include")
-  set(PYTHON_LDFLAGS "-L${LIBDIR}/ffi/lib -L${LIBDIR}/sqlite/lib -L${LIBDIR}/bzip2/lib -L${LIBDIR}/lzma/lib -L${LIBDIR}/zlib/lib")
-  set(PYTHON_CONFIGURE_EXTRA_ENV
-    export CFLAGS=${PYTHON_CFLAGS} &&
-    export CPPFLAGS=${PYTHON_CFLAGS} &&
-    export LDFLAGS=${PYTHON_LDFLAGS} &&
-    export PKG_CONFIG_PATH=${LIBDIR}/ffi/lib/pkgconfig)
-  set(PYTHON_PATCH ${PATCH_CMD} --verbose -p1 -d ${BUILD_DIR}/python/src/external_python < ${PATCH_DIR}/python_linux.diff)
-
-  ExternalProject_Add(external_python
-    URL ${PYTHON_URI}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH MD5=${PYTHON_HASH}
-    PREFIX ${BUILD_DIR}/python
-    PATCH_COMMAND ${PYTHON_PATCH}
-    CONFIGURE_COMMAND ${PYTHON_CONFIGURE_ENV} && ${PYTHON_CONFIGURE_EXTRA_ENV} && cd ${BUILD_DIR}/python/src/external_python/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/python ${PYTHON_CONFIGURE_EXTRA_ARGS}
-    BUILD_COMMAND ${PYTHON_CONFIGURE_ENV} && cd ${BUILD_DIR}/python/src/external_python/ && make -j${MAKE_THREADS}
-    INSTALL_COMMAND ${PYTHON_CONFIGURE_ENV} && cd ${BUILD_DIR}/python/src/external_python/ && make install
-    INSTALL_DIR ${LIBDIR}/python)
-
-  add_custom_target(Make_Python_Environment ALL DEPENDS external_python)
-endif()
-
-if(MSVC)
-  add_custom_command(
-    OUTPUT ${LIBDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.tar.gz
-    OUTPUT ${BUILD_DIR}/python/src/external_python/redist/bin/python${PYTHON_POSTFIX}.exe
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${BUILD_DIR}/python/src/external_python/lib ${BUILD_DIR}/python/src/external_python/redist/lib
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_asyncio${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_asyncio${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_bz2${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_bz2${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_contextvars${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_contextvars${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_ctypes${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_ctypes${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_ctypes_test${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_ctypes_test${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_decimal${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_decimal${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_distutils_findvs${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_distutils_findvs${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_elementtree${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_elementtree${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_hashlib${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_hashlib${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_lzma${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_lzma${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_msi${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_msi${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_multiprocessing${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_multiprocessing${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_overlapped${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_overlapped${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_queue${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_queue${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_socket${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_socket${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_sqlite3${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_sqlite3${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_ssl${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_ssl${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_testbuffer${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_testbuffer${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_testcapi${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_testcapi${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_testimportmultiple${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_testimportmultiple${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/_testmultiphase${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/_testmultiphase${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/pyexpat${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/pyexpat${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/python${PYTHON_POSTFIX}.exe" ${BUILD_DIR}/python/src/external_python/redist/bin/python${PYTHON_POSTFIX}.exe
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/select${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/select${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/unicodedata${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/unicodedata${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/winsound${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/winsound${PYTHON_POSTFIX}.pyd
-    #xxlimited is an example extension module, we don't need to ship it and debug doesn't build it
-    #leaving it commented out, so I won't get confused again with the next update.
-    #COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/xxlimited${PYTHON_POSTFIX}.pyd" ${BUILD_DIR}/python/src/external_python/redist/lib/xxlimited${PYTHON_POSTFIX}.pyd
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/libssl-1_1${SSL_POSTFIX}.dll" ${BUILD_DIR}/python/src/external_python/redist/lib/libssl-1_1${SSL_POSTFIX}.dll
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/libcrypto-1_1${SSL_POSTFIX}.dll" ${BUILD_DIR}/python/src/external_python/redist/lib/libcrypto-1_1${SSL_POSTFIX}.dll
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/sqlite3${PYTHON_POSTFIX}.dll" ${BUILD_DIR}/python/src/external_python/redist/lib/sqlite3${PYTHON_POSTFIX}.dll
-    COMMAND ${CMAKE_COMMAND} -E chdir "${BUILD_DIR}/python/src/external_python/redist" ${CMAKE_COMMAND} -E tar "cfvz" "${LIBDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.tar.gz" "."
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/python/ ${HARVEST_TARGET}/python/
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.tar.gz ${HARVEST_TARGET}/Release/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.tar.gz
-  )
-
-  add_custom_target(Package_Python ALL DEPENDS external_python ${LIBDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.tar.gz ${BUILD_DIR}/python/src/external_python/redist/bin/python${PYTHON_POSTFIX}.exe)
-
-  add_custom_command(OUTPUT ${BUILD_DIR}/python/src/external_python/run/python${PYTHON_POSTFIX}.exe
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${BUILD_DIR}/python/src/external_python/redist ${BUILD_DIR}/python/src/external_python/run
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${BUILD_DIR}/python/src/external_python/include ${BUILD_DIR}/python/src/external_python/run/include
-    COMMAND ${CMAKE_COMMAND} -E copy "${BUILD_DIR}/python/src/external_python/PC/pyconfig.h" ${BUILD_DIR}/python/src/external_python/run/include/pyconfig.h
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.dll" ${BUILD_DIR}/python/src/external_python/run/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.dll
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib" ${BUILD_DIR}/python/src/external_python/run/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}.lib  #missing postfix on purpose, distutils is not expecting it
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib" ${BUILD_DIR}/python/src/external_python/run/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib  #other things like numpy still want it though.
-    COMMAND ${CMAKE_COMMAND} -E copy "${PYTHON_OUTPUTDIR}/python${PYTHON_POSTFIX}.exe" ${BUILD_DIR}/python/src/external_python/run/python${PYTHON_POSTFIX}.exe
-    COMMAND ${BUILD_DIR}/python/src/external_python/run/python${PYTHON_POSTFIX}.exe -m ensurepip --upgrade
-  )
-  add_custom_target(Make_Python_Environment ALL DEPENDS ${BUILD_DIR}/python/src/external_python/run/python${PYTHON_POSTFIX}.exe Package_Python)
-endif()
-
-if(UNIX)
-  add_dependencies(
-    external_python
-    external_bzip2
-    external_ffi
-    external_lzma
-    external_ssl
-    external_sqlite
-    external_zlib
-  )
-endif()

build_files/build_environment/cmake/python.map

@@ -1,9 +0,0 @@
-{
-global:
-    Py*;
-    _Py*;
-    _py*;
-local:
-    *;
-};
-

build_files/build_environment/cmake/python_site_packages.cmake

@@ -1,41 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-if(WIN32)
-  set(HARVEST_CMD cmd /C FOR /d /r ${BUILD_DIR}/python/src/external_python/run/lib/site-packages %d IN (__pycache__) DO @IF EXIST "%d" rd /s /q "%d" &&
-    ${CMAKE_COMMAND} -E copy_directory  ${BUILD_DIR}/python/src/external_python/run/lib/site-packages/idna ${HARVEST_TARGET}/Release/site-packages/idna &&
-    ${CMAKE_COMMAND} -E copy_directory  ${BUILD_DIR}/python/src/external_python/run/lib/site-packages/chardet ${HARVEST_TARGET}/Release/site-packages/chardet &&
-    ${CMAKE_COMMAND} -E copy_directory  ${BUILD_DIR}/python/src/external_python/run/lib/site-packages/urllib3 ${HARVEST_TARGET}/Release/site-packages/urllib3 &&
-    ${CMAKE_COMMAND} -E copy_directory  ${BUILD_DIR}/python/src/external_python/run/lib/site-packages/certifi ${HARVEST_TARGET}/Release/site-packages/certifi &&
-    ${CMAKE_COMMAND} -E copy_directory  ${BUILD_DIR}/python/src/external_python/run/lib/site-packages/requests ${HARVEST_TARGET}/Release/site-packages/requests
-  )
-else()
-  set(HARVEST_CMD echo .)
-endif()
-
-ExternalProject_Add(external_python_site_packages
-  DOWNLOAD_COMMAND ""
-  CONFIGURE_COMMAND ""
-  BUILD_COMMAND ""
-  PREFIX ${BUILD_DIR}/site_packages
-  INSTALL_COMMAND ${PYTHON_BINARY} -m pip install idna==${IDNA_VERSION} chardet==${CHARDET_VERSION} urllib3==${URLLIB3_VERSION} certifi==${CERTIFI_VERSION} requests==${REQUESTS_VERSION} --no-binary :all: && ${HARVEST_CMD}
-)
-
-add_dependencies(
-  external_python_site_packages
-  Make_Python_Environment
-)

build_files/build_environment/cmake/sdl.cmake

@@ -1,49 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  set(SDL_EXTRA_ARGS
-    -DSDL_STATIC=Off
-  )
-else()
-  set(SDL_EXTRA_ARGS
-    -DSDL_STATIC=ON
-    -DSDL_SHARED=OFF
-    -DSDL_VIDEO=OFF
-    -DSNDIO=OFF
-  )
-endif()
-
-ExternalProject_Add(external_sdl
-  URL ${SDL_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${SDL_HASH}
-  PREFIX ${BUILD_DIR}/sdl
-  PATCH_COMMAND ${PATCH_CMD} -p 0 -N -d ${BUILD_DIR}/sdl/src/external_sdl < ${PATCH_DIR}/sdl.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/sdl ${DEFAULT_CMAKE_FLAGS} ${SDL_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/sdl
-)
-
-if(BUILD_MODE STREQUAL Release AND WIN32)
-  ExternalProject_Add_Step(external_sdl after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/sdl/include/sdl2 ${HARVEST_TARGET}/sdl/include
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/sdl/lib ${HARVEST_TARGET}/sdl/lib
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/sdl/bin ${HARVEST_TARGET}/sdl/lib
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/setup_mingw32.cmake

@@ -1,227 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-####################################################################################################################
-# Mingw32 Builds
-####################################################################################################################
-# This installs mingw32+msys to compile ffmpeg/iconv/libsndfile/lapack/fftw3
-####################################################################################################################
-
-message("LIBDIR = ${LIBDIR}")
-macro(cmake_to_msys_path MsysPath ResultingPath)
-  string(REPLACE ":" "" TmpPath "${MsysPath}")
-  string(SUBSTRING ${TmpPath} 0 1 Drive)
-  string(SUBSTRING ${TmpPath} 1 255 PathPart)
-  string(TOLOWER ${Drive} LowerDrive)
-  string(CONCAT ${ResultingPath} "/" ${LowerDrive} ${PathPart})
-endmacro()
-cmake_to_msys_path(${LIBDIR} mingw_LIBDIR)
-message("mingw_LIBDIR = ${mingw_LIBDIR}")
-
-message("Checking for mingw32")
-# download mingw32
-if(NOT EXISTS "${DOWNLOAD_DIR}/i686-4.9.4-release-win32-sjlj-rt_v5-rev0.7z")
-  message("Downloading mingw32")
-  file(DOWNLOAD "https://astuteinternet.dl.sourceforge.net/project/mingw-w64/Toolchains%20targetting%20Win32/Personal%20Builds/mingw-builds/4.9.4/threads-win32/sjlj/i686-4.9.4-release-win32-sjlj-rt_v5-rev0.7z" "${DOWNLOAD_DIR}/i686-4.9.4-release-win32-sjlj-rt_v5-rev0.7z")
-endif()
-
-# make mingw root directory
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${DOWNLOAD_DIR}/mingw
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}
-  )
-endif()
-
-# extract mingw32
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/ming32sh.cmd") AND (EXISTS "${DOWNLOAD_DIR}/i686-4.9.4-release-win32-sjlj-rt_v5-rev0.7z"))
-  message("Extracting mingw32")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf ${DOWNLOAD_DIR}/i686-4.9.4-release-win32-sjlj-rt_v5-rev0.7z
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/mingw
-  )
-endif()
-
-message("Checking for pkg-config")
-if(NOT EXISTS "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip")
-  message("Downloading pkg-config")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/pkgconfiglite/0.28-1/pkg-config-lite-0.28-1_bin-win32.zip" "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip")
-endif()
-
-# extract pkgconfig
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/pkg-config.exe") AND (EXISTS "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip"))
-  message("Extracting pkg-config")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/
-  )
-
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1/bin/pkg-config.exe" "${DOWNLOAD_DIR}/mingw/mingw32/bin/pkg-config.exe"
-  )
-
-endif()
-
-message("Checking for nasm")
-if(NOT EXISTS "${DOWNLOAD_DIR}/nasm-2.13.02-win32.zip")
-  message("Downloading nasm")
-  file(DOWNLOAD "http://www.nasm.us/pub/nasm/releasebuilds/2.13.02/win32/nasm-2.13.02-win32.zip" "${DOWNLOAD_DIR}/nasm-2.13.02-win32.zip")
-endif()
-
-# extract nasm
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/nasm.exe") AND (EXISTS "${DOWNLOAD_DIR}/nasm-2.13.02-win32.zip"))
-  message("Extracting nasm")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf "${DOWNLOAD_DIR}/nasm-2.13.02-win32.zip"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/
-  )
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/nasm-2.13.02/nasm.exe" "${DOWNLOAD_DIR}/mingw/mingw32/bin/nasm.exe"
-  )
-
-endif()
-SET(NASM_PATH ${DOWNLOAD_DIR}/mingw/mingw32/bin/nasm.exe)
-message("Checking for mingwGet")
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip")
-  message("Downloading mingw-get")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/mingw/Installer/mingw-get/mingw-get-0.6.2-beta-20131004-1/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip" "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip")
-endif()
-
-# extract mingw_get
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/mingw-get.exe") AND (EXISTS "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip"))
-  message("Extracting mingw-get")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/mingw/mingw32/
-  )
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/mingw-get.exe") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/msys/1.0/bin/make.exe"))
-  message("Installing MSYS")
-  execute_process(
-    COMMAND ${DOWNLOAD_DIR}/mingw/mingw32/bin/mingw-get install msys msys-patch
-    WORKING_DIRECTORY  ${DOWNLOAD_DIR}/mingw/mingw32/bin/
-  )
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/mingw-get.exe") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/msys/1.0/bin/mktemp.exe"))
-  message("Installing mktemp")
-  execute_process(
-    COMMAND ${DOWNLOAD_DIR}/mingw/mingw32/bin/mingw-get install msys msys-mktemp
-    WORKING_DIRECTORY  ${DOWNLOAD_DIR}/mingw/mingw32/bin/
-  )
-endif()
-
-
-message("Checking for CoreUtils")
-# download old core_utils for pr.exe (ffmpeg needs it to build)
-if(NOT EXISTS "${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2")
-  message("Downloading CoreUtils 5.97")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/mingw/MSYS/Base/msys-core/_obsolete/coreutils-5.97-MSYS-1.0.11-2/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2" "${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2")
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/msys/1.0/bin/pr.exe"))
-  message("Installing pr from CoreUtils 5.97")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${DOWNLOAD_DIR}/tmp_coreutils
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}
-  )
-
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf ${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/tmp_coreutils/
-  )
-
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy ${DOWNLOAD_DIR}/tmp_coreutils/coreutils-5.97/bin/pr.exe "${DOWNLOAD_DIR}/mingw/mingw32/msys/1.0/bin/pr.exe"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/tmp_coreutils/
-  )
-endif()
-
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/ming32sh.cmd")
-  message("Installing ming32sh.cmd")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/ming32sh.cmd  ${DOWNLOAD_DIR}/mingw/mingw32/ming32sh.cmd
-  )
-endif()
-
-message("Checking for perl")
-# download perl for libvpx
-if(NOT EXISTS "${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-32bit-portable.zip")
-  message("Downloading perl")
-  file(DOWNLOAD "http://strawberryperl.com/download/5.22.1.3/strawberry-perl-5.22.1.3-32bit-portable.zip" "${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-32bit-portable.zip")
-endif()
-
-# make perl root directory
-if(NOT EXISTS "${DOWNLOAD_DIR}/perl32")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${DOWNLOAD_DIR}/perl32
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}
-  )
-endif()
-
-# extract perl
-if((NOT EXISTS "${DOWNLOAD_DIR}/perl32/portable.perl") AND (EXISTS "${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-32bit-portable.zip"))
-  message("Extracting perl")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf ${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-32bit-portable.zip
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/perl32
-  )
-endif()
-
-# get yasm for vpx
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/yasm.exe")
-  message("Downloading yasm")
-  file(DOWNLOAD "http://www.tortall.net/projects/yasm/releases/yasm-1.3.0-win32.exe" "${DOWNLOAD_DIR}/mingw/mingw32/bin/yasm.exe")
-endif()
-
-message("checking i686-w64-mingw32-strings")
-# copy strings.exe to i686-w64-mingw32-strings for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/i686-w64-mingw32-strings.exe")
-  message("fixing i686-w64-mingw32-strings.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw32/bin/strings.exe" "${DOWNLOAD_DIR}/mingw/mingw32/bin/i686-w64-mingw32-strings.exe"
-  )
-endif()
-
-message("checking i686-w64-mingw32-ar.exe")
-# copy ar.exe to i686-w64-mingw32-ar.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/i686-w64-mingw32-ar.exe")
-  message("fixing i686-w64-mingw32-ar.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw32/bin/ar.exe" "${DOWNLOAD_DIR}/mingw/mingw32/bin/i686-w64-mingw32-ar.exe"
-  )
-endif()
-
-message("checking i686-w64-mingw32-strip.exe")
-# copy strip.exe to i686-w64-mingw32-strip.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/i686-w64-mingw32-strip.exe")
-  message("fixing i686-w64-mingw32-strip.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw32/bin/strip.exe" "${DOWNLOAD_DIR}/mingw/mingw32/bin/i686-w64-mingw32-strip.exe"
-  )
-endif()
-
-message("checking i686-w64-mingw32-ranlib.exe")
-# copy ranlib.exe to i686-w64-mingw32-ranlib.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw32/bin/i686-w64-mingw32-ranlib.exe")
-  message("fixing i686-w64-mingw32-ranlib.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw32/bin/ranlib.exe" "${DOWNLOAD_DIR}/mingw/mingw32/bin/i686-w64-mingw32-ranlib.exe"
-  )
-endif()

build_files/build_environment/cmake/setup_mingw64.cmake

@@ -1,227 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-####################################################################################################################
-# Mingw64 Builds
-####################################################################################################################
-# This installs mingw64+msys to compile ffmpeg/iconv/libsndfile/lapack/fftw3
-####################################################################################################################
-
-message("LIBDIR = ${LIBDIR}")
-macro(cmake_to_msys_path MsysPath ResultingPath)
-  string(REPLACE ":" "" TmpPath "${MsysPath}")
-  string(SUBSTRING ${TmpPath} 0 1 Drive)
-  string(SUBSTRING ${TmpPath} 1 255 PathPart)
-  string(TOLOWER ${Drive} LowerDrive)
-  string(CONCAT ${ResultingPath} "/" ${LowerDrive} ${PathPart})
-endmacro()
-cmake_to_msys_path(${LIBDIR} mingw_LIBDIR)
-message("mingw_LIBDIR = ${mingw_LIBDIR}")
-
-message("Checking for mingw64")
-# download ming64
-if(NOT EXISTS "${DOWNLOAD_DIR}/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z")
-  message("Downloading mingw64")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/mingw-w64/Toolchains%20targetting%20Win64/Personal%20Builds/mingw-builds/4.9.4/threads-win32/seh/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z" "${DOWNLOAD_DIR}/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z")
-endif()
-
-# make mingw root directory
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${DOWNLOAD_DIR}/mingw
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}
-  )
-endif()
-
-# extract mingw64
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/ming64sh.cmd") AND (EXISTS "${DOWNLOAD_DIR}/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z"))
-  message("Extracting mingw64")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf ${DOWNLOAD_DIR}/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/mingw
-  )
-endif()
-
-message("Checking for pkg-config")
-if(NOT EXISTS "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip")
-  message("Downloading pkg-config")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/pkgconfiglite/0.28-1/pkg-config-lite-0.28-1_bin-win32.zip" "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip")
-endif()
-
-# extract pkgconfig
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/pkg-config.exe") AND (EXISTS "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip"))
-  message("Extracting pkg-config")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/
-  )
-
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1/bin/pkg-config.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/pkg-config.exe"
-  )
-
-endif()
-
-message("Checking for nasm")
-if(NOT EXISTS "${DOWNLOAD_DIR}/nasm-2.13.02-win64.zip")
-  message("Downloading nasm")
-  file(DOWNLOAD "http://www.nasm.us/pub/nasm/releasebuilds/2.13.02/win64/nasm-2.13.02-win64.zip" "${DOWNLOAD_DIR}/nasm-2.13.02-win64.zip")
-endif()
-
-# extract nasm
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/nasm.exe") AND (EXISTS "${DOWNLOAD_DIR}/nasm-2.13.02-win64.zip"))
-  message("Extracting nasm")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf "${DOWNLOAD_DIR}/nasm-2.13.02-win64.zip"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/
-  )
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/nasm-2.13.02/nasm.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/nasm.exe"
-  )
-
-endif()
-SET(NASM_PATH ${DOWNLOAD_DIR}/mingw/mingw64/bin/nasm.exe)
-
-message("Checking for mingwGet")
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip")
-  message("Downloading mingw-get")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/mingw/Installer/mingw-get/mingw-get-0.6.2-beta-20131004-1/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip" "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip")
-endif()
-
-# extract mingw_get
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get.exe") AND (EXISTS "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip"))
-  message("Extracting mingw-get")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/mingw/mingw64/
-  )
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get.exe") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/make.exe"))
-  message("Installing MSYS")
-  execute_process(
-    COMMAND ${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get install msys msys-patch
-    WORKING_DIRECTORY  ${DOWNLOAD_DIR}/mingw/mingw64/bin/
-  )
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get.exe") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/mktemp.exe"))
-  message("Installing mktemp")
-  execute_process(
-    COMMAND ${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get install msys msys-mktemp
-    WORKING_DIRECTORY  ${DOWNLOAD_DIR}/mingw/mingw64/bin/
-  )
-endif()
-
-message("Checking for CoreUtils")
-# download old core_utils for pr.exe (ffmpeg needs it to build)
-if(NOT EXISTS "${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2")
-  message("Downloading CoreUtils 5.97")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/mingw/MSYS/Base/msys-core/_obsolete/coreutils-5.97-MSYS-1.0.11-2/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2" "${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2")
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/pr.exe"))
-  message("Installing pr from CoreUtils 5.97")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${DOWNLOAD_DIR}/tmp_coreutils
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}
-  )
-
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf ${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/tmp_coreutils/
-  )
-
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy ${DOWNLOAD_DIR}/tmp_coreutils/coreutils-5.97/bin/pr.exe "${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/pr.exe"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/tmp_coreutils/
-  )
-endif()
-
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/ming64sh.cmd")
-  message("Installing ming64sh.cmd")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/ming64sh.cmd  ${DOWNLOAD_DIR}/mingw/mingw64/ming64sh.cmd
-  )
-endif()
-
-message("Checking for perl")
-# download perl for libvpx
-if(NOT EXISTS "${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-64bit-portable.zip")
-  message("Downloading perl")
-  file(DOWNLOAD "http://strawberryperl.com/download/5.22.1.3/strawberry-perl-5.22.1.3-64bit-portable.zip" "${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-64bit-portable.zip")
-endif()
-
-# make perl root directory
-if(NOT EXISTS "${DOWNLOAD_DIR}/perl")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${DOWNLOAD_DIR}/perl
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}
-  )
-endif()
-
-# extract perl
-if((NOT EXISTS "${DOWNLOAD_DIR}/perl/portable.perl") AND (EXISTS "${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-64bit-portable.zip"))
-  message("Extracting perl")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf ${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-64bit-portable.zip
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/perl
-  )
-endif()
-
-# get yasm for vpx
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/yasm.exe")
-  message("Downloading yasm")
-  file(DOWNLOAD "http://www.tortall.net/projects/yasm/releases/yasm-1.3.0-win64.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/yasm.exe")
-endif()
-
-message("checking x86_64-w64-mingw32-strings.exe")
-# copy strings.exe to x86_64-w64-mingw32-strings.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-strings.exe")
-  message("fixing x86_64-w64-mingw32-strings.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw64/bin/strings.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-strings.exe"
-  )
-endif()
-
-message("checking x86_64-w64-mingw32-ar.exe")
-# copy ar.exe to x86_64-w64-mingw32-ar.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-ar.exe")
-  message("fixing x86_64-w64-mingw32-ar.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw64/bin/ar.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-ar.exe"
-  )
-endif()
-
-message("checking x86_64-w64-mingw32-strip.exe")
-# copy strip.exe to x86_64-w64-mingw32-strip.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-strip.exe")
-  message("fixing x86_64-w64-mingw32-strip.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw64/bin/strip.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-strip.exe"
-  )
-endif()
-
-message("checking x86_64-w64-mingw32-ranlib.exe")
-# copy ranlib.exe to x86_64-w64-mingw32-ranlib.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-ranlib.exe")
-  message("fixing x86_64-w64-mingw32-ranlib.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw64/bin/ranlib.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-ranlib.exe"
-  )
-endif()

build_files/build_environment/cmake/sndfile.cmake

@@ -1,62 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(SNDFILE_EXTRA_ARGS)
-set(SNDFILE_ENV PKG_CONFIG_PATH=${mingw_LIBDIR}/ogg/lib/pkgconfig:${mingw_LIBDIR}/vorbis/lib/pkgconfig:${mingw_LIBDIR}/flac/lib/pkgconfig:${mingw_LIBDIR})
-
-if(WIN32)
-  set(SNDFILE_ENV set ${SNDFILE_ENV} &&)
-  #shared for windows because static libs will drag in a libgcc dependency.
-  set(SNDFILE_OPTIONS --disable-static --enable-shared )
-else()
-  set(SNDFILE_OPTIONS --enable-static --disable-shared )
-endif()
-
-if(UNIX)
-  set(SNDFILE_PATCH_CMD ${PATCH_CMD} --verbose -p 0 -d ${BUILD_DIR}/sndfile/src/external_sndfile < ${PATCH_DIR}/sndfile.diff)
-else()
-  set(SNDFILE_PATCH_CMD)
-endif()
-
-ExternalProject_Add(external_sndfile
-  URL ${SNDFILE_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${SNDFILE_HASH}
-  PREFIX ${BUILD_DIR}/sndfile
-  PATCH_COMMAND ${SNDFILE_PATCH_CMD}
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sndfile/src/external_sndfile/ && ${SNDFILE_ENV} ${CONFIGURE_COMMAND} ${SNDFILE_OPTIONS} --prefix=${mingw_LIBDIR}/sndfile
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sndfile/src/external_sndfile/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sndfile/src/external_sndfile/ && make install
-  INSTALL_DIR ${LIBDIR}/sndfile
-)
-
-if(MSVC)
-  set_target_properties(external_sndfile PROPERTIES FOLDER Mingw)
-endif()
-
-add_dependencies(
-  external_sndfile
-  external_ogg
-  external_vorbis
-)
-if(UNIX)
-  add_dependencies(
-    external_sndfile
-    external_flac
-  )
-endif()

build_files/build_environment/cmake/spnav.cmake

@@ -1,28 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_spnav
-  URL ${SPNAV_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${SPNAV_HASH}
-  PREFIX ${BUILD_DIR}/spnav
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/spnav/src/external_spnav/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/spnav --disable-shared --enable-static --with-pic
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/spnav/src/external_spnav/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/spnav/src/external_spnav/ && make install
-  INSTALL_DIR ${LIBDIR}/spnav
-)

build_files/build_environment/cmake/sqlite.cmake

@@ -1,57 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(SQLITE_CONFIGURE_ENV echo .)
-set(SQLITE_CONFIGURATION_ARGS)
-
-if(UNIX AND NOT APPLE)
-  set(SQLITE_LDFLAGS -Wl,--as-needed)
-  set(SQLITE_CFLAGS
-    "-DSQLITE_SECURE_DELETE -DSQLITE_ENABLE_COLUMN_METADATA \
-    -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_FTS3_PARENTHESIS \
-    -DSQLITE_ENABLE_RTREE=1 -DSQLITE_SOUNDEX=1 \
-    -DSQLITE_ENABLE_UNLOCK_NOTIFY \
-    -DSQLITE_OMIT_LOOKASIDE=1 -DSQLITE_ENABLE_DBSTAT_VTAB \
-    -DSQLITE_ENABLE_UPDATE_DELETE_LIMIT=1 \
-    -DSQLITE_ENABLE_LOAD_EXTENSION \
-    -DSQLITE_ENABLE_JSON1 \
-    -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
-    -DSQLITE_THREADSAFE=1 \
-    -DSQLITE_ENABLE_FTS3_TOKENIZER=1 \
-    -DSQLITE_MAX_SCHEMA_RETRY=25 \
-    -DSQLITE_ENABLE_PREUPDATE_HOOK \
-    -DSQLITE_ENABLE_SESSION \
-    -DSQLITE_ENABLE_STMTVTAB \
-    -DSQLITE_MAX_VARIABLE_NUMBER=250000 \
-    -fPIC")
-  set(SQLITE_CONFIGURE_ENV ${SQLITE_CONFIGURE_ENV} && export LDFLAGS=${SQLITE_LDFLAGS} && export CFLAGS=${SQLITE_CFLAGS})
-  set(SQLITE_CONFIGURATION_ARGS ${SQLITE_CONFIGURATION_ARGS} --enable-threadsafe --enable-load-extension --enable-json1 --enable-fts4 --enable-fts5
-      --enable-shared=no)
-endif()
-
-ExternalProject_Add(external_sqlite
-  URL ${SQLITE_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA1=${SQLITE_HASH}
-  PREFIX ${BUILD_DIR}/sqlite
-  PATCH_COMMAND ${SQLITE_PATCH_CMD}
-  CONFIGURE_COMMAND ${SQLITE_CONFIGURE_ENV} && cd ${BUILD_DIR}/sqlite/src/external_sqlite/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/sqlite ${SQLITE_CONFIGURATION_ARGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sqlite/src/external_sqlite/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sqlite/src/external_sqlite/ && make install
-  INSTALL_DIR ${LIBDIR}/sqlite
-)

build_files/build_environment/cmake/ssl.cmake

@@ -1,48 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(SSL_CONFIGURE_COMMAND ./Configure)
-set(SSL_PATCH_CMD echo .)
-
-if(APPLE)
-  set(SSL_OS_COMPILER "blender-darwin-x86_64")
-else()
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(SSL_EXTRA_ARGS enable-ec_nistp_64_gcc_128)
-    set(SSL_OS_COMPILER "blender-linux-x86_64")
-  else()
-    set(SSL_OS_COMPILER "blender-linux-x86")
-  endif()
-endif()
-
-ExternalProject_Add(external_ssl
-  URL ${SSL_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${SSL_HASH}
-  PREFIX ${BUILD_DIR}/ssl
-  PATCH_COMMAND ${SSL_PATCH_CMD}
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ssl/src/external_ssl/ && ${SSL_CONFIGURE_COMMAND} --prefix=${LIBDIR}/ssl
-    --openssldir=${LIBDIR}/ssl
-    no-shared
-    no-idea no-mdc2 no-rc5 no-zlib no-ssl3 enable-unit-test no-ssl3-method enable-rfc3779 enable-cms
-    --config=${CMAKE_CURRENT_SOURCE_DIR}/cmake/ssl.conf
-    ${SSL_OS_COMPILER}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ssl/src/external_ssl/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ssl/src/external_ssl/ && make install
-  INSTALL_DIR ${LIBDIR}/ssl
-)

build_files/build_environment/cmake/ssl.conf

@@ -1,15 +0,0 @@
-%targets = (
-
-  "blender-linux-x86" => {
-    inherit_from     => [ "linux-x86" ],
-    cflags => add("-fPIC"),
-  },
-  "blender-linux-x86_64" => {
-    inherit_from     => [ "linux-x86_64" ],
-    cflags => add("-fPIC"),
-  },
-  "blender-darwin-x86_64" => {
-    inherit_from     => [ "darwin64-x86_64-cc" ],
-    cflags => add("-fPIC"),
-  },
-);

build_files/build_environment/cmake/tbb.cmake

@@ -1,52 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(TBB_EXTRA_ARGS
-  -DTBB_BUILD_SHARED=Off
-  -DTBB_BUILD_TBBMALLOC=Off
-  -DTBB_BUILD_TBBMALLOC_PROXY=Off
-  -DTBB_BUILD_STATIC=On
-)
-
-# CMake script for TBB from https://github.com/wjakob/tbb/blob/master/CMakeLists.txt
-ExternalProject_Add(external_tbb
-  URL ${TBB_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${TBB_HASH}
-  PREFIX ${BUILD_DIR}/tbb
-  PATCH_COMMAND COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/cmakelists_tbb.txt ${BUILD_DIR}/tbb/src/external_tbb/CMakeLists.txt &&
-  ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/tbb/src/external_tbb/build/vs2013/version_string.ver ${BUILD_DIR}/tbb/src/external_tbb/src/tbb/version_string.ver
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/tbb ${DEFAULT_CMAKE_FLAGS} ${TBB_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/tbb
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_tbb after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbb_static.lib ${HARVEST_TARGET}/tbb/lib/tbb.lib
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/tbb/include/ ${HARVEST_TARGET}/tbb/include/
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_tbb after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbb_static.lib ${HARVEST_TARGET}/tbb/lib/tbb_debug.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/theora.cmake

@@ -1,44 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_theora
-  URL ${THEORA_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${THEORA_HASH}
-  PREFIX ${BUILD_DIR}/theora
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/theora/src/external_theora/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/theora
-    --disable-shared
-    --enable-static
-    --with-pic
-    --with-ogg=${LIBDIR}/ogg
-    --with-vorbis=${LIBDIR}/vorbis
-    --disable-examples
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/theora/src/external_theora/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/theora/src/external_theora/ && make install
-  INSTALL_DIR ${LIBDIR}/theora
-)
-
-add_dependencies(
-  external_theora
-  external_vorbis
-  external_ogg
-)
-
-if(MSVC)
-  set_target_properties(external_theora PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/tiff.cmake

@@ -1,47 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(TIFF_EXTRA_ARGS
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include
-  -DPNG_STATIC=ON
-  -DBUILD_SHARED_LIBS=OFF
-  -Dlzma=OFF
-  -Djbig=OFF
-)
-
-ExternalProject_Add(external_tiff
-  URL ${TIFF_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${TIFF_HASH}
-  PREFIX ${BUILD_DIR}/tiff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/tiff ${DEFAULT_CMAKE_FLAGS} ${TIFF_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/tiff
-)
-
-add_dependencies(
-  external_tiff
-  external_zlib
-)
-
-if(WIN32 AND BUILD_MODE STREQUAL Debug)
-  ExternalProject_Add_Step(external_tiff after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tiff/lib/tiffd${LIBEXT} ${LIBDIR}/tiff/lib/tiff${LIBEXT}
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/tinyxml.cmake

@@ -1,31 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(TINYXML_EXTRA_ARGS
-)
-
-ExternalProject_Add(external_tinyxml
-  URL ${TINYXML_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${TINYXML_HASH}
-  PREFIX ${BUILD_DIR}/tinyxml
-  #patch taken from ocio
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -N -d ${BUILD_DIR}/tinyxml/src/external_tinyxml < ${PATCH_DIR}/tinyxml.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/tinyxml ${DEFAULT_CMAKE_FLAGS} ${TINYXML_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/tinyxml
-)

build_files/build_environment/cmake/versions.cmake

@@ -1,304 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(ZLIB_VERSION 1.2.11)
-set(ZLIB_URI https://zlib.net/zlib-${ZLIB_VERSION}.tar.gz)
-set(ZLIB_HASH 1c9f62f0778697a09d36121ead88e08e)
-
-set(OPENAL_VERSION 1.18.2)
-set(OPENAL_URI http://openal-soft.org/openal-releases/openal-soft-${OPENAL_VERSION}.tar.bz2)
-set(OPENAL_HASH d4eeb0889812e2fdeaa1843523d76190)
-
-set(PNG_VERSION 1.6.35)
-set(PNG_URI http://prdownloads.sourceforge.net/libpng/libpng-${PNG_VERSION}.tar.xz)
-set(PNG_HASH 678b7e696a62a193ed3503b04bf449d6)
-
-set(JPEG_VERSION 1.5.3)
-set(JPEG_URI https://github.com/libjpeg-turbo/libjpeg-turbo/archive/${JPEG_VERSION}.tar.gz)
-set(JPEG_HASH 5b7549d440b86c98a517355c102d155e)
-
-set(BOOST_VERSION 1.68.0)
-set(BOOST_VERSION_NODOTS 1_68_0)
-set(BOOST_URI https://dl.bintray.com/boostorg/release/${BOOST_VERSION}/source/boost_${BOOST_VERSION_NODOTS}.tar.gz)
-set(BOOST_HASH 5d8b4503582fffa9eefdb9045359c239)
-
-set(BLOSC_VERSION 1.14.4)
-set(BLOSC_URI https://github.com/Blosc/c-blosc/archive/v${BLOSC_VERSION}.tar.gz)
-set(BLOSC_HASH e80dfc71e4cba03b8d01ed0876547ffe)
-
-set(PTHREADS_VERSION 3.0.0)
-set(PTHREADS_URI http://sourceforge.mirrorservice.org/p/pt/pthreads4w/pthreads4w-code-v${PTHREADS_VERSION}.zip)
-set(PTHREADS_HASH f3bf81bb395840b3446197bcf4ecd653)
-
-set(ILMBASE_VERSION 2.3.0)
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    set(ILMBASE_VERSION_POSTFIX _s)
-    set(OPENEXR_VERSION_POSTFIX _s)
-  else()
-    set(ILMBASE_VERSION_POSTFIX _s_d)
-    set(OPENEXR_VERSION_POSTFIX _s_d)
-  endif()
-else()
-  set(ILMBASE_VERSION_POSTFIX)
-endif()
-set(ILMBASE_URI https://github.com/openexr/openexr/releases/download/v${ILMBASE_VERSION}/ilmbase-${ILMBASE_VERSION}.tar.gz)
-set(ILMBASE_HASH 354bf86de3b930ab87ac63619d60c860)
-
-set(OPENEXR_VERSION 2.3.0)
-if(WIN32) #release 2.3.0 tarball has broken cmake support
-  set(OPENEXR_URI https://github.com/openexr/openexr/archive/0ac2ea34c8f3134148a5df4052e40f155b76f6fb.tar.gz)
-  set(OPENEXR_HASH ed159435d508240712fbaaa21d94bafb)
-else()
-  set(OPENEXR_VERSION_POSTFIX)
-  set(OPENEXR_URI https://github.com/openexr/openexr/releases/download/v${OPENEXR_VERSION}/openexr-${OPENEXR_VERSION}.tar.gz)
-  set(OPENEXR_HASH a157e8a46596bc185f2472a5a4682174)
-endif()
-
-set(FREETYPE_VERSION 2.9.1)
-set(FREETYPE_URI http://prdownloads.sourceforge.net/freetype/freetype-${FREETYPE_VERSION}.tar.gz)
-set(FREETYPE_HASH 3adb0e35d3c100c456357345ccfa8056)
-
-set(GLEW_VERSION 1.13.0)
-set(GLEW_URI http://prdownloads.sourceforge.net/glew/glew/${GLEW_VERSION}/glew-${GLEW_VERSION}.tgz)
-set(GLEW_HASH 7cbada3166d2aadfc4169c4283701066)
-
-set(FREEGLUT_VERSION 3.0.0)
-set(FREEGLUT_URI http://pilotfiber.dl.sourceforge.net/project/freeglut/freeglut/${FREEGLUT_VERSION}/freeglut-${FREEGLUT_VERSION}.tar.gz)
-set(FREEGLUT_HASH 90c3ca4dd9d51cf32276bc5344ec9754)
-
-set(HDF5_VERSION 1.8.17)
-set(HDF5_URI https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.8/hdf5-${HDF5_VERSION}/src/hdf5-${HDF5_VERSION}.tar.gz)
-set(HDF5_HASH 7d572f8f3b798a628b8245af0391a0ca)
-
-set(ALEMBIC_VERSION 1.7.8)
-set(ALEMBIC_URI https://github.com/alembic/alembic/archive/${ALEMBIC_VERSION}.tar.gz)
-set(ALEMBIC_MD5 d095c2feb5e183b824904db7b63c1d30)
-
-## hash is for 3.1.2
-set(GLFW_GIT_UID 30306e54705c3adae9fe082c816a3be71963485c)
-set(GLFW_URI https://github.com/glfw/glfw/archive/${GLFW_GIT_UID}.zip)
-set(GLFW_HASH 20cacb1613da7eeb092f3ac4f6b2b3d0)
-
-#latest uid in git as of 2016-04-01
-set(CLEW_GIT_UID 277db43f6cafe8b27c6f1055f69dc67da4aeb299)
-set(CLEW_URI https://github.com/OpenCLWrangler/clew/archive/${CLEW_GIT_UID}.zip)
-set(CLEW_HASH 2c699d10ed78362e71f56fae2a4c5f98)
-
-#latest uid in git as of 2016-04-01
-set(CUEW_GIT_UID 1744972026de9cf27c8a7dc39cf39cd83d5f922f)
-set(CUEW_URI https://github.com/CudaWrangler/cuew/archive/${CUEW_GIT_UID}.zip)
-set(CUEW_HASH 86760d62978ebfd96cd93f5aa1abaf4a)
-
-set(OPENSUBDIV_VERSION v3_4_0_RC2)
-set(OPENSUBDIV_Hash f6a10ba9efaa82fde86fe65aad346319)
-set(OPENSUBDIV_URI https://github.com/PixarAnimationStudios/OpenSubdiv/archive/${OPENSUBDIV_VERSION}.tar.gz)
-
-set(SDL_VERSION 2.0.8)
-set(SDL_URI https://www.libsdl.org/release/SDL2-${SDL_VERSION}.tar.gz)
-set(SDL_HASH 3800d705cef742c6a634f202c37f263f)
-
-set(OPENCOLLADA_VERSION v1.6.68)
-set(OPENCOLLADA_URI https://github.com/KhronosGroup/OpenCOLLADA/archive/${OPENCOLLADA_VERSION}.tar.gz)
-set(OPENCOLLADA_HASH ee7dae874019fea7be11613d07567493)
-
-set(OPENCOLORIO_VERSION 1.1.0)
-set(OPENCOLORIO_URI https://github.com/imageworks/OpenColorIO/archive/v${OPENCOLORIO_VERSION}.tar.gz)
-set(OPENCOLORIO_HASH 802d8f5b1d1fe316ec5f76511aa611b8)
-
-set(LLVM_VERSION 6.0.1)
-set(LLVM_URI http://releases.llvm.org/${LLVM_VERSION}/llvm-${LLVM_VERSION}.src.tar.xz)
-set(LLVM_HASH c88c98709300ce2c285391f387fecce0)
-
-set(CLANG_URI http://releases.llvm.org/${LLVM_VERSION}/cfe-${LLVM_VERSION}.src.tar.xz)
-set(CLANG_HASH 4e419bd4e3b55aa06d872320f754bd85)
-
-set(OPENMP_URI http://releases.llvm.org/${LLVM_VERSION}/openmp-${LLVM_VERSION}.src.tar.xz)
-set(OPENMP_HASH 4826402ae3633c36c51ba4d0e5527d30)
-
-set(OPENIMAGEIO_VERSION 1.8.13)
-set(OPENIMAGEIO_URI https://github.com/OpenImageIO/oiio/archive/Release-${OPENIMAGEIO_VERSION}.tar.gz)
-set(OPENIMAGEIO_HASH f5526c3c9878029ee900d84856683f93)
-
-set(TIFF_VERSION 4.0.9)
-set(TIFF_URI http://download.osgeo.org/libtiff/tiff-${TIFF_VERSION}.tar.gz)
-set(TIFF_HASH 54bad211279cc93eb4fca31ba9bfdc79)
-
-set(OSL_VERSION 1.9.9)
-set(OSL_URI https://github.com/imageworks/OpenShadingLanguage/archive/Release-${OSL_VERSION}.tar.gz)
-set(OSL_HASH 44ad511e424965a10fce051a053b0605)
-
-set(PYTHON_VERSION 3.7.0)
-set(PYTHON_SHORT_VERSION 3.7)
-set(PYTHON_SHORT_VERSION_NO_DOTS 37)
-set(PYTHON_URI https://www.python.org/ftp/python/${PYTHON_VERSION}/Python-${PYTHON_VERSION}.tar.xz)
-set(PYTHON_HASH eb8c2a6b1447d50813c02714af4681f3)
-
-set(TBB_VERSION 2018_U5)
-set(TBB_URI https://github.com/01org/tbb/archive/${TBB_VERSION}.tar.gz)
-set(TBB_HASH ff3ae09f8c23892fbc3008c39f78288f)
-
-set(OPENVDB_VERSION 5.1.0)
-set(OPENVDB_URI https://github.com/dreamworksanimation/openvdb/archive/v${OPENVDB_VERSION}.tar.gz)
-set(OPENVDB_HASH 5310101f874dcfd2165f9cee68c22624)
-
-set(IDNA_VERSION 2.7)
-set(CHARDET_VERSION 3.0.4)
-set(URLLIB3_VERSION 1.23)
-set(CERTIFI_VERSION 2018.8.13)
-set(REQUESTS_VERSION 2.19.1)
-
-set(NUMPY_VERSION v1.15.0)
-set(NUMPY_SHORT_VERSION 1.15)
-set(NUMPY_URI https://files.pythonhosted.org/packages/3a/20/c81632328b1a4e1db65f45c0a1350a9c5341fd4bbb8ea66cdd98da56fe2e/numpy-1.15.0.zip)
-set(NUMPY_HASH 20e13185089011116a98e11c9bf8aa07)
-
-set(LAME_VERSION 3.100)
-set(LAME_URI http://downloads.sourceforge.net/project/lame/lame/3.100/lame-${LAME_VERSION}.tar.gz)
-set(LAME_HASH 83e260acbe4389b54fe08e0bdbf7cddb)
-
-set(OGG_VERSION 1.3.3)
-set(OGG_URI http://downloads.xiph.org/releases/ogg/libogg-${OGG_VERSION}.tar.gz)
-set(OGG_HASH c2e8a485110b97550f453226ec644ebac6cb29d1caef2902c007edab4308d985)
-
-set(VORBIS_VERSION 1.3.6)
-set(VORBIS_URI http://downloads.xiph.org/releases/vorbis/libvorbis-${VORBIS_VERSION}.tar.gz)
-set(VORBIS_HASH 6ed40e0241089a42c48604dc00e362beee00036af2d8b3f46338031c9e0351cb)
-
-set(THEORA_VERSION 1.1.1)
-set(THEORA_URI http://downloads.xiph.org/releases/theora/libtheora-${THEORA_VERSION}.tar.bz2)
-set(THEORA_HASH b6ae1ee2fa3d42ac489287d3ec34c5885730b1296f0801ae577a35193d3affbc)
-
-set(FLAC_VERSION 1.3.2)
-set(FLAC_URI http://downloads.xiph.org/releases/flac/flac-${FLAC_VERSION}.tar.xz)
-set(FLAC_HASH 91cfc3ed61dc40f47f050a109b08610667d73477af6ef36dcad31c31a4a8d53f)
-
-set(VPX_VERSION 1.7.0)
-set(VPX_URI https://github.com/webmproject/libvpx/archive/v${VPX_VERSION}/libvpx-v${VPX_VERSION}.tar.gz)
-set(VPX_HASH 1fec931eb5c94279ad219a5b6e0202358e94a93a90cfb1603578c326abfc1238)
-
-set(X264_URI http://download.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-20180811-2245-stable.tar.bz2)
-set(X264_HASH ae8a868a0e236a348b35d79f3ee80294b169d1195408b689f9851383661ed7aa)
-
-set(XVIDCORE_VERSION 1.3.5)
-set(XVIDCORE_URI http://downloads.xvid.org/downloads/xvidcore-${XVIDCORE_VERSION}.tar.gz)
-set(XVIDCORE_HASH 165ba6a2a447a8375f7b06db5a3c91810181f2898166e7c8137401d7fc894cf0)
-
-#this has to be in sync with the version in blenders /extern folder
-set(OPENJPEG_VERSION 2.3.0)
-set(OPENJPEG_SHORT_VERSION 2.3)
-# Use slightly newer commit after release which includes a cmake fix
-set(OPENJPEG_URI https://github.com/uclouvain/openjpeg/archive/66297f07a43.zip)
-set(OPENJPEG_HASH 8242b18d908c7c42174e4231a741cfa7ce7c26b6ed5c9644feb9df7b3054310b)
-
-set(FAAD_VERSION 2-2.8.8)
-set(FAAD_URI http://downloads.sourceforge.net/faac/faad${FAAD_VERSION}.tar.gz)
-set(FAAD_HASH 28f6116efdbe9378269f8a6221767d1f)
-
-set(FFMPEG_VERSION 4.0.2)
-set(FFMPEG_URI http://ffmpeg.org/releases/ffmpeg-${FFMPEG_VERSION}.tar.bz2)
-set(FFMPEG_HASH 5576e8a22f80b6a336db39808f427cfb)
-
-set(FFTW_VERSION 3.3.8)
-set(FFTW_URI http://www.fftw.org/fftw-${FFTW_VERSION}.tar.gz)
-set(FFTW_HASH 8aac833c943d8e90d51b697b27d4384d)
-
-set(ICONV_VERSION 1.15)
-set(ICONV_URI http://ftp.gnu.org/pub/gnu/libiconv/libiconv-${ICONV_VERSION}.tar.gz)
-set(ICONV_HASH ace8b5f2db42f7b3b3057585e80d9808)
-
-set(LAPACK_VERSION 3.6.0)
-set(LAPACK_URI http://www.netlib.org/lapack/lapack-${LAPACK_VERSION}.tgz)
-set(LAPACK_HASH f2f6c67134e851fe189bb3ca1fbb5101)
-
-set(SNDFILE_VERSION 1.0.28)
-set(SNDFILE_URI http://www.mega-nerd.com/libsndfile/files/libsndfile-${SNDFILE_VERSION}.tar.gz)
-set(SNDFILE_HASH 646b5f98ce89ac60cdb060fcd398247c)
-
-#set(HIDAPI_VERSION 0.8.0-rc1)
-#set(HIDAPI_URI https://github.com/signal11/hidapi/archive/hidapi-${HIDAPI_VERSION}.tar.gz)
-#set(HIDAPI_HASH 069f9dd746edc37b6b6d0e3656f47199)
-
-set(HIDAPI_UID 89a6c75dc6f45ecabd4ddfbd2bf5ba6ad8ba38b5)
-set(HIDAPI_URI https://github.com/TheOnlyJoey/hidapi/archive/${HIDAPI_UID}.zip)
-set(HIDAPI_HASH b6e22f6b514f8bcf594989f20ffc46fb)
-
-set(WEBP_VERSION 0.6.1)
-set(WEBP_URI https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-${WEBP_VERSION}.tar.gz)
-set(WEBP_HASH b49ce9c3e3e9acae4d91bca44bb85a72)
-
-set(SPNAV_VERSION 0.2.3)
-set(SPNAV_URI http://downloads.sourceforge.net/project/spacenav/spacenav%20library%20%28SDK%29/libspnav%20${SPNAV_VERSION}/libspnav-${SPNAV_VERSION}.tar.gz)
-set(SPNAV_HASH 44d840540d53326d4a119c0f1aa7bf0a)
-
-set(JEMALLOC_VERSION 5.0.1)
-set(JEMALLOC_URI https://github.com/jemalloc/jemalloc/releases/download/${JEMALLOC_VERSION}/jemalloc-${JEMALLOC_VERSION}.tar.bz2)
-set(JEMALLOC_HASH 507f7b6b882d868730d644510491d18f)
-
-set(XML2_VERSION 2.9.4)
-set(XML2_URI http://xmlsoft.org/sources/libxml2-${XML2_VERSION}.tar.gz)
-set(XML2_HASH ae249165c173b1ff386ee8ad676815f5)
-
-set(TINYXML_VERSION 2_6_2)
-set(TINYXML_VERSION_DOTS 2.6.2)
-set(TINYXML_URI https://nchc.dl.sourceforge.net/project/tinyxml/tinyxml/${TINYXML_VERSION_DOTS}/tinyxml_${TINYXML_VERSION}.tar.gz)
-set(TINYXML_HASH c1b864c96804a10526540c664ade67f0)
-
-set(YAMLCPP_VERSION 0.6.2)
-set(YAMLCPP_URI https://codeload.github.com/jbeder/yaml-cpp/tar.gz/yaml-cpp-${YAMLCPP_VERSION})
-set(YAMLCPP_HASH 5b943e9af0060d0811148b037449ef82)
-
-set(LCMS_VERSION 2.9)
-set(LCMS_URI https://nchc.dl.sourceforge.net/project/lcms/lcms/${LCMS_VERSION}/lcms2-${LCMS_VERSION}.tar.gz)
-set(LCMS_HASH 8de1b7724f578d2995c8fdfa35c3ad0e)
-
-set(PUGIXML_VERSION 1.9)
-set(PUGIXML_URI https://github.com/zeux/pugixml/archive/v1.9.tar.gz)
-set(PUGIXML_HASH 9346ca1dce2c48f1748c12fdac41a714)
-
-set(FLEXBISON_VERSION 2.5.5)
-set(FLEXBISON_URI http://prdownloads.sourceforge.net/winflexbison//win_flex_bison-2.5.5.zip)
-set(FLEXBISON_HASH d87a3938194520d904013abef3df10ce)
-
-# Libraries to keep Python modules static on Linux.
-
-# NOTE: bzip.org domain does no longer belong to BZip 2 project, so we download
-# sources from Debian packaging.
-set(BZIP2_VERSION 1.0.6)
-set(BZIP2_URI http://http.debian.net/debian/pool/main/b/bzip2/bzip2_${BZIP2_VERSION}.orig.tar.bz2)
-set(BZIP2_HASH d70a9ccd8bdf47e302d96c69fecd54925f45d9c7b966bb4ef5f56b770960afa7)
-
-set(FFI_VERSION 3.2.1)
-set(FFI_URI https://sourceware.org/pub/libffi/libffi-${FFI_VERSION}.tar.gz)
-set(FFI_HASH d06ebb8e1d9a22d19e38d63fdb83954253f39bedc5d46232a05645685722ca37)
-
-set(LZMA_VERSION 5.2.4)
-set(LZMA_URI https://tukaani.org/xz/xz-${LZMA_VERSION}.tar.bz2)
-set(LZMA_HASH 3313fd2a95f43d88e44264e6b015e7d03053e681860b0d5d3f9baca79c57b7bf)
-
-set(SSL_VERSION 1.1.0i)
-set(SSL_URI https://www.openssl.org/source/openssl-${SSL_VERSION}.tar.gz)
-set(SSL_HASH ebbfc844a8c8cc0ea5dc10b86c9ce97f401837f3fa08c17b2cdadc118253cf99)
-
-set(SQLITE_VERSION 3.24.0)
-set(SQLITE_URI https://www.sqlite.org/2018/sqlite-src-3240000.zip)
-set(SQLITE_HASH fb558c49ee21a837713c4f1e7e413309aabdd9c7)
-
-set(EMBREE_VERSION 3.2.4)
-set(EMBREE_URI https://github.com/embree/embree/archive/v${EMBREE_VERSION}.zip)
-set(EMBREE_HASH 3d4a1147002ff43939d45140aa9d6fb8)

build_files/build_environment/cmake/vorbis.cmake

@@ -1,41 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_vorbis
-  URL ${VORBIS_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${VORBIS_HASH}
-  PREFIX ${BUILD_DIR}/vorbis
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vorbis/src/external_vorbis/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/vorbis
-    --disable-shared
-    --enable-static
-    --with-pic
-    --with-ogg=${LIBDIR}/ogg
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vorbis/src/external_vorbis/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vorbis/src/external_vorbis/ && make install
-  INSTALL_DIR ${LIBDIR}/vorbis
-)
-
-add_dependencies(
-  external_vorbis
-  external_ogg
-)
-
-if(MSVC)
-  set_target_properties(external_vorbis PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/vpx.cmake

@@ -1,60 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(VPX_EXTRA_FLAGS --target=x86_64-win64-gcc --disable-multithread)
-  else()
-    set(VPX_EXTRA_FLAGS --target=x86-win32-gcc --disable-multithread)
-  endif()
-else()
-  if(APPLE)
-    set(VPX_EXTRA_FLAGS --target=x86_64-darwin13-gcc)
-  else()
-    set(VPX_EXTRA_FLAGS --target=generic-gnu)
-  endif()
-endif()
-
-ExternalProject_Add(external_vpx
-  URL ${VPX_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${VPX_HASH}
-  PREFIX ${BUILD_DIR}/vpx
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} &&
-    cd ${BUILD_DIR}/vpx/src/external_vpx/ &&
-    ${CONFIGURE_COMMAND_NO_TARGET} --prefix=${LIBDIR}/vpx
-      --disable-shared
-      --enable-static
-      --disable-install-bins
-      --disable-install-srcs
-      --disable-sse4_1
-      --disable-sse3
-      --disable-ssse3
-      --disable-avx
-      --disable-avx2
-      --disable-unit-tests
-      --disable-examples
-      ${VPX_EXTRA_FLAGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vpx/src/external_vpx/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vpx/src/external_vpx/ && make install
-  INSTALL_DIR ${LIBDIR}/vpx
-)
-
-if(MSVC)
-  set_target_properties(external_vpx PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/webp.cmake

@@ -1,41 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-# Note the utility apps may use png/tiff/gif system libraries, but the
-# library itself does not depend on them, so should give no problems.
-
-set(WEBP_EXTRA_ARGS
-  -DWEBP_HAVE_SSE2=ON
-  -DWEBP_HAVE_SSE41=OFF
-  -DWEBP_HAVE_AVX2=OFF
-)
-
-if(WIN32)
-  set(WEBP_BUILD_DIR ${BUILD_MODE}/)
-else()
-  set(WEBP_BUILD_DIR)
-endif()
-
-ExternalProject_Add(external_webp
-  URL ${WEBP_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${WEBP_HASH}
-  PREFIX ${BUILD_DIR}/webp
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/webp -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${WEBP_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/webp
-)

build_files/build_environment/cmake/x264.cmake

@@ -1,45 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  set(X264_EXTRA_ARGS --enable-win32thread --cross-prefix=${MINGW_HOST}- --host=${MINGW_HOST})
-  set(X264_PATCH_CMD ${PATCH_CMD} --verbose -p 1 -N -d ${BUILD_DIR}/x264/src/external_x264 < ${PATCH_DIR}/x264.diff)
-else()
-  set(X264_PATCH_CMD echo .)
-endif()
-
-
-ExternalProject_Add(external_x264
-  URL ${X264_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${X264_HASH}
-  PREFIX ${BUILD_DIR}/x264
-  PATCH_COMMAND ${X264_PATCH_CMD}
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/x264/src/external_x264/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/x264
-    --enable-static
-    --enable-pic
-    --disable-lavf
-    ${X264_EXTRA_ARGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/x264/src/external_x264/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/x264/src/external_x264/ && make install
-  INSTALL_DIR ${LIBDIR}/x264
-)
-
-if(MSVC)
-  set_target_properties(external_x264 PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/xml2.cmake

@@ -1,36 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_xml2
-  URL ${XML2_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${XML2_HASH}
-  PREFIX ${BUILD_DIR}/xml2
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xml2/src/external_xml2/ && ${CONFIGURE_COMMAND}
-    --prefix=${LIBDIR}/xml2
-    --disable-shared
-    --enable-static
-    --with-pic
-    --with-python=no
-    --with-lzma=no
-    --with-zlib=no
-    --with-iconv=no
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xml2/src/external_xml2/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xml2/src/external_xml2/ && make install
-  INSTALL_DIR ${LIBDIR}/xml2
-)

build_files/build_environment/cmake/xvidcore.cmake

@@ -1,44 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-if(WIN32)
-  set(XVIDCORE_EXTRA_ARGS --host=${MINGW_HOST})
-endif()
-
-ExternalProject_Add(external_xvidcore
-  URL ${XVIDCORE_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH SHA256=${XVIDCORE_HASH}
-  PREFIX ${BUILD_DIR}/xvidcore
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xvidcore/src/external_xvidcore/build/generic && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/xvidcore ${XVIDCORE_EXTRA_ARGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xvidcore/src/external_xvidcore/build/generic && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} &&
-  ${CMAKE_COMMAND} -E remove ${LIBDIR}/xvidcore/lib/* && # clean because re-installing fails otherwise
-  cd ${BUILD_DIR}/xvidcore/src/external_xvidcore/build/generic && make install
-  INSTALL_DIR ${LIBDIR}/xvidcore
-)
-
-ExternalProject_Add_Step(external_xvidcore after_install
-  COMMAND ${CMAKE_COMMAND} -E rename ${LIBDIR}/xvidcore/lib/xvidcore.a ${LIBDIR}/xvidcore/lib/libxvidcore.a || true
-  COMMAND ${CMAKE_COMMAND} -E remove ${LIBDIR}/xvidcore/lib/xvidcore.dll.a
-  DEPENDEES install
-)
-
-if(MSVC)
-  set_target_properties(external_xvidcore PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/yamlcpp.cmake

@@ -1,34 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-set(YAMLCPP_EXTRA_ARGS
-  -DBUILD_GMOCK=OFF
-  -DYAML_CPP_BUILD_TESTS=OFF
-  -DYAML_CPP_BUILD_TOOLS=OFF
-  -DYAML_CPP_BUILD_CONTRIB=OFF
-  -DMSVC_SHARED_RT=OFF
-)
-
-ExternalProject_Add(external_yamlcpp
-  URL ${YAMLCPP_URI}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH MD5=${YAMLCPP_HASH}
-  PREFIX ${BUILD_DIR}/yamlcpp
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/yamlcpp ${DEFAULT_CMAKE_FLAGS} ${YAMLCPP_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/yamlcpp
-)

build_files/build_environment/cmake/zlib.cmake

@@ -1,47 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_zlib
-  URL ${ZLIB_URI}
-  URL_HASH MD5=${ZLIB_HASH}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  PREFIX ${BUILD_DIR}/zlib
-  CMAKE_ARGS -DCMAKE_POSITION_INDEPENDENT_CODE=ON -DCMAKE_INSTALL_PREFIX=${LIBDIR}/zlib ${DEFAULT_CMAKE_FLAGS}
-  INSTALL_DIR ${LIBDIR}/zlib
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_zlib after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/zlib/lib/zlibstatic${LIBEXT} ${HARVEST_TARGET}/zlib/lib/libz_st${LIBEXT}
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/zlib/include/ ${HARVEST_TARGET}/zlib/include/
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_zlib after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/zlib/lib/zlibstaticd${LIBEXT} ${HARVEST_TARGET}/zlib/lib/libz_st_d${LIBEXT}
-    DEPENDEES install
-    )
-  endif()
-else()
-  ExternalProject_Add_Step(external_zlib after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/zlib/lib/libz.a ${LIBDIR}/zlib/lib/libz_pic.a
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/zlib_mingw.cmake

@@ -1,39 +0,0 @@
-# ***** BEGIN GPL LICENSE BLOCK *****
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# ***** END GPL LICENSE BLOCK *****
-
-ExternalProject_Add(external_zlib_mingw
-  URL ${ZLIB_URI}
-  URL_HASH MD5=${ZLIB_HASH}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  PREFIX ${BUILD_DIR}/zlib_mingw
-  CONFIGURE_COMMAND echo .
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/zlib_mingw/src/external_zlib_mingw/ && make -f win32/makefile.gcc -j${MAKE_THREADS}
-  INSTALL_COMMAND echo .
-  INSTALL_DIR ${LIBDIR}/zlib_mingw
-)
-
-if(BUILD_MODE STREQUAL Release)
-  ExternalProject_Add_Step(external_zlib_mingw after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/zlib_mingw/src/external_zlib_mingw/libz.a ${LIBDIR}/zlib/lib/z.lib
-    DEPENDEES install
-  )
-endif()
-
-if(MSVC)
-  set_target_properties(external_zlib_mingw PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/install_deps_patches/llvm.patch

@@ -0,0 +1,12 @@
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -13,7 +13,7 @@
+ set(LLVM_VERSION_MAJOR 3)
+ set(LLVM_VERSION_MINOR 1)
+ 
+-set(PACKAGE_VERSION "\${LLVM_VERSION_MAJOR}.\${LLVM_VERSION_MINOR}svn")
++set(PACKAGE_VERSION "\${LLVM_VERSION_MAJOR}.\${LLVM_VERSION_MINOR}")
+ 
+ set_property(GLOBAL PROPERTY USE_FOLDERS ON)
+ 
+

build_files/build_environment/install_deps_patches/osl.patch

@@ -0,0 +1,12 @@
+--- a/src/shaders/CMakeLists.txt
++++ b/src/shaders/CMakeLists.txt
+@@ -27,7 +27,7 @@ macro (osl_compile oslsrc objlist headers)
+         message (STATUS "cmd: ${CMAKE_CURRENT_BINARY_DIR}/../oslc/oslc ${oslsrc}")
+     endif ()
+     add_custom_command (OUTPUT ${osofile}
+-        COMMAND "${CMAKE_CURRENT_BINARY_DIR}/../oslc/oslc" ${oslsrc}
++        COMMAND "${CMAKE_CURRENT_BINARY_DIR}/../oslc/oslc" "-o" ${osofile} ${oslsrc}
+         MAIN_DEPENDENCY ${oslsrc}
+         DEPENDS ${${headers}} ${oslsrc} "${CMAKE_CURRENT_BINARY_DIR}/stdosl.h" "${CMAKE_CURRENT_BINARY_DIR}/../oslc/oslc"
+         WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR})
+

build_files/build_environment/patches/blosc.diff

@@ -1,31 +0,0 @@
-diff -Naur src/blosc/CMakeLists.txt external_blosc/blosc/CMakeLists.txt
---- src/blosc/CMakeLists.txt	2016-02-03 10:26:28 -0700
-+++ external_blosc/blosc/CMakeLists.txt	2017-03-03 09:03:31 -0700
-@@ -61,6 +61,8 @@
-         set(SOURCES ${SOURCES} win32/pthread.c)
-     else(NOT Threads_FOUND)
-         set(LIBS ${LIBS} ${CMAKE_THREAD_LIBS_INIT})
-+        set(LIBS ${LIBS} ${PTHREAD_LIBS})
-+        include_directories( ${PTHREAD_INCLUDE_DIR} )
-     endif(NOT Threads_FOUND)
- else(WIN32)
-     find_package(Threads REQUIRED)
-diff -Naur external_blosc.orig/blosc/blosc.c external_blosc/blosc/blosc.c
---- external_blosc.orig/blosc/blosc.c   2018-07-30 04:56:38 -0600
-+++ external_blosc/blosc/blosc.c        2018-08-11 15:27:26 -0600
-@@ -56,14 +56,7 @@
-   #include <inttypes.h>
- #endif  /* _WIN32 */
-
--/* Include the win32/pthread.h library for all the Windows builds. See #224. */
--#if defined(_WIN32)
--  #include "win32/pthread.h"
--  #include "win32/pthread.c"
--#else
--  #include <pthread.h>
--#endif
--
-+#include <pthread.h>
-
- /* Some useful units */
- #define KB 1024

build_files/build_environment/patches/cmake/modules/FindBlosc.cmake

@@ -1,72 +0,0 @@
-# - Find BLOSC library
-# Find the native BLOSC includes and library
-# This module defines
-#  BLOSC_INCLUDE_DIRS, where to find blosc.h, Set when
-#                    BLOSC is found.
-#  BLOSC_LIBRARIES, libraries to link against to use BLOSC.
-#  BLOSC_ROOT_DIR, The base directory to search for BLOSC.
-#                This can also be an environment variable.
-#  BLOSC_FOUND, If false, do not try to use BLOSC.
-#
-# also defined, but not for general use are
-#  BLOSC_LIBRARY, where to find the BLOSC library.
-
-#=============================================================================
-# Copyright 2016 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If BLOSC_ROOT_DIR was defined in the environment, use it.
-IF(NOT BLOSC_ROOT_DIR AND NOT $ENV{BLOSC_ROOT_DIR} STREQUAL "")
-  SET(BLOSC_ROOT_DIR $ENV{BLOSC_ROOT_DIR})
-ENDIF()
-
-SET(_blosc_SEARCH_DIRS
-  ${BLOSC_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/lib/blosc
-)
-
-FIND_PATH(BLOSC_INCLUDE_DIR
-  NAMES
-    blosc.h
-  HINTS
-    ${_blosc_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-FIND_LIBRARY(BLOSC_LIBRARY
-  NAMES
-    blosc
-  HINTS
-    ${_blosc_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-)
-
-# handle the QUIETLY and REQUIRED arguments and set BLOSC_FOUND to TRUE if
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(BLOSC DEFAULT_MSG
-    BLOSC_LIBRARY BLOSC_INCLUDE_DIR)
-
-IF(BLOSC_FOUND)
-  SET(BLOSC_LIBRARIES ${BLOSC_LIBRARY})
-  SET(BLOSC_INCLUDE_DIRS ${BLOSC_INCLUDE_DIR})
-ELSE()
-  SET(BLOSC_FOUND FALSE)
-ENDIF()
-
-MARK_AS_ADVANCED(
-  BLOSC_INCLUDE_DIR
-  BLOSC_LIBRARY
-)

build_files/build_environment/patches/cmake/modules/FindCppUnit.cmake

@@ -1,72 +0,0 @@
-# - Find CPPUNIT library
-# Find the native CPPUNIT includes and library
-# This module defines
-#  CPPUNIT_INCLUDE_DIRS, where to find cppunit.h, Set when
-#                    CPPUNIT is found.
-#  CPPUNIT_LIBRARIES, libraries to link against to use CPPUNIT.
-#  CPPUNIT_ROOT_DIR, The base directory to search for CPPUNIT.
-#                This can also be an environment variable.
-#  CPPUNIT_FOUND, If false, do not try to use CPPUNIT.
-#
-# also defined, but not for general use are
-#  CPPUNIT_LIBRARY, where to find the CPPUNIT library.
-
-#=============================================================================
-# Copyright 2016 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If CPPUNIT_ROOT_DIR was defined in the environment, use it.
-IF(NOT CPPUNIT_ROOT_DIR AND NOT $ENV{CPPUNIT_ROOT_DIR} STREQUAL "")
-  SET(CPPUNIT_ROOT_DIR $ENV{CPPUNIT_ROOT_DIR})
-ENDIF()
-
-SET(_cppunit_SEARCH_DIRS
-  ${CPPUNIT_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/lib/cppunit
-)
-
-FIND_PATH(CPPUNIT_INCLUDE_DIR
-  NAMES
-    cppunit/Test.h
-  HINTS
-    ${_cppunit_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-FIND_LIBRARY(CPPUNIT_LIBRARY
-  NAMES
-    cppunit
-  HINTS
-    ${_cppunit_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-)
-
-# handle the QUIETLY and REQUIRED arguments and set CPPUNIT_FOUND to TRUE if
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(CPPUNIT DEFAULT_MSG
-    CPPUNIT_LIBRARY CPPUNIT_INCLUDE_DIR)
-
-IF(CPPUNIT_FOUND)
-  SET(CPPUNIT_LIBRARIES ${CPPUNIT_LIBRARY})
-  SET(CPPUNIT_INCLUDE_DIRS ${CPPUNIT_INCLUDE_DIR})
-ELSE()
-  SET(CPPUNIT_FOUND FALSE)
-ENDIF()
-
-MARK_AS_ADVANCED(
-  CPPUNIT_INCLUDE_DIR
-  CPPUNIT_LIBRARY
-)

build_files/build_environment/patches/cmake/modules/FindIlmBase.cmake

@@ -1,264 +0,0 @@
-# Module to find IlmBase
-#
-# This module will first look into the directories defined by the variables:
-#   - ILMBASE_HOME, ILMBASE_VERSION, ILMBASE_LIB_AREA
-#
-# It also supports non-standard names for the library components.
-#
-# To use a custom IlmBase:
-#   - Set the variable ILMBASE_CUSTOM to True
-#   - Set the variable ILMBASE_CUSTOM_LIBRARIES to a list of the libraries to
-#     use, e.g. "SpiImath SpiHalf SpiIlmThread SpiIex"
-#   - Optionally set the variable ILMBASE_CUSTOM_INCLUDE_DIR to any
-#     particularly weird place that the OpenEXR/*.h files may be found
-#   - Optionally set the variable ILMBASE_CUSTOM_LIB_DIR to any
-#     particularly weird place that the libraries files may be found
-#
-# This module defines the following variables:
-#
-# ILMBASE_INCLUDE_DIR - where to find half.h, IlmBaseConfig.h, etc.
-# ILMBASE_LIBRARIES   - list of libraries to link against when using IlmBase.
-# ILMBASE_FOUND       - True if IlmBase was found.
-
-# Other standarnd issue macros
-include(FindPackageHandleStandardArgs)
-include(FindPackageMessage)
-include(SelectLibraryConfigurations)
-
-
-if( ILMBASE_USE_STATIC_LIBS )
-  set( _ilmbase_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
-  if(WIN32)
-    set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
-  else()
-    set(CMAKE_FIND_LIBRARY_SUFFIXES .a )
-  endif()
-endif()
-
-# Macro to assemble a helper state variable
-macro(SET_STATE_VAR varname)
-  set(tmp_ilmbaselibs ${ILMBASE_CUSTOM_LIBRARIES})
-  separate_arguments(tmp_ilmbaselibs)
-  set(tmp_lst
-    ${ILMBASE_CUSTOM} | ${tmp_ilmbaselibs} |
-    ${ILMBASE_HOME} | ${ILMBASE_VERSION} | ${ILMBASE_LIB_AREA}
-  )
-  set(${varname} "${tmp_lst}")
-  unset(tmp_ilmbaselibs)
-  unset(tmp_lst)
-endmacro()
-
-# To enforce that find_* functions do not use inadvertently existing versions
-if(ILMBASE_CUSTOM)
-  set(ILMBASE_FIND_OPTIONS "NO_DEFAULT_PATH")
-endif()
-
-# Macro to search for an include directory
-macro(PREFIX_FIND_INCLUDE_DIR prefix includefile libpath_var)
-  string(TOUPPER ${prefix}_INCLUDE_DIR tmp_varname)
-  find_path(${tmp_varname} ${includefile}
-    HINTS ${${libpath_var}}
-    PATH_SUFFIXES include
-    ${ILMBASE_FIND_OPTIONS}
-  )
-  if(${tmp_varname})
-    mark_as_advanced(${tmp_varname})
-  endif()
-  unset(tmp_varname)
-endmacro()
-
-
-# Macro to search for the given library and adds the cached
-# variable names to the specified list
-macro(PREFIX_FIND_LIB prefix libname libpath_var liblist_var cachelist_var)
-  string(TOUPPER ${prefix}_${libname} tmp_prefix)
-  # Handle new library names for OpenEXR 2.1 build via cmake
-  string(REPLACE "." "_" _ILMBASE_VERSION ${ILMBASE_VERSION})
-  string(SUBSTRING ${_ILMBASE_VERSION} 0 3 _ILMBASE_VERSION )
-
-  find_library(${tmp_prefix}_LIBRARY_RELEASE
-    NAMES ${libname} ${libname}-${_ILMBASE_VERSION}
-    HINTS ${${libpath_var}}
-    PATH_SUFFIXES lib
-    ${ILMBASE_FIND_OPTIONS}
-  )
-  find_library(${tmp_prefix}_LIBRARY_DEBUG
-    NAMES ${libname}d ${libname}_d ${libname}debug ${libname}_debug
-    HINTS ${${libpath_var}}
-    PATH_SUFFIXES lib
-    ${ILMBASE_FIND_OPTIONS}
-  )
-  # Properly define ${tmp_prefix}_LIBRARY (cached) and ${tmp_prefix}_LIBRARIES
-  select_library_configurations(${tmp_prefix})
-  list(APPEND ${liblist_var} ${tmp_prefix}_LIBRARIES)
-
-  # Add to the list of variables which should be reset
-  list(APPEND ${cachelist_var}
-    ${tmp_prefix}_LIBRARY
-    ${tmp_prefix}_LIBRARY_RELEASE
-    ${tmp_prefix}_LIBRARY_DEBUG)
-  mark_as_advanced(
-    ${tmp_prefix}_LIBRARY
-    ${tmp_prefix}_LIBRARY_RELEASE
-    ${tmp_prefix}_LIBRARY_DEBUG)
-  unset(tmp_prefix)
-endmacro()
-
-
-# Encode the current state of the external variables into a string
-SET_STATE_VAR(ILMBASE_CURRENT_STATE)
-
-# If the state has changed, clear the cached variables
-if(ILMBASE_CACHED_STATE AND
-    NOT ILMBASE_CACHED_STATE STREQUAL ILMBASE_CURRENT_STATE)
-
-  foreach(libvar ${ILMBASE_CACHED_VARS})
-    unset(${libvar} CACHE)
-  endforeach()
-endif()
-
-
-# Generic search paths
-set(IlmBase_generic_include_paths
-  ${ILMBASE_CUSTOM_INCLUDE_DIR}
-  /usr/include
-  /usr/include/${CMAKE_LIBRARY_ARCHITECTURE}
-  /usr/local/include
-  /sw/include
-  /opt/local/include
-)
-set(IlmBase_generic_library_paths
-  ${ILMBASE_CUSTOM_LIB_DIR}
-  /usr/lib
-  /usr/lib/${CMAKE_LIBRARY_ARCHITECTURE}
-  /usr/local/lib
-  /usr/local/lib/${CMAKE_LIBRARY_ARCHITECTURE}
-  /sw/lib
-  /opt/local/lib
-)
-
-# Search paths for the IlmBase files
-if(ILMBASE_HOME)
-  if(ILMBASE_VERSION)
-    set(IlmBase_include_paths
-      ${ILMBASE_HOME}/ilmbase-${ILMBASE_VERSION}/include
-      ${ILMBASE_HOME}/include/ilmbase-${ILMBASE_VERSION}
-    )
-    set(IlmBase_library_paths
-      ${ILMBASE_HOME}/ilmbase-${ILMBASE_VERSION}/lib
-      ${ILMBASE_HOME}/lib/ilmbase-${ILMBASE_VERSION}
-    )
-  endif()
-  list(APPEND IlmBase_include_paths ${ILMBASE_HOME}/include)
-  set(IlmBase_library_paths
-    ${ILMBASE_HOME}/lib
-    ${ILMBASE_HOME}/lib64
-    ${ILMBASE_LIB_AREA}
-    ${IlmBase_library_paths})
-endif()
-list(APPEND IlmBase_include_paths ${IlmBase_generic_include_paths})
-list(APPEND IlmBase_library_paths ${IlmBase_generic_library_paths})
-
-# Locate the header files
-PREFIX_FIND_INCLUDE_DIR(IlmBase
-  OpenEXR/IlmBaseConfig.h IlmBase_include_paths)
-
-if(ILMBASE_INCLUDE_DIR)
-  # Get the version from config file, if not already set.
-  if(NOT ILMBASE_VERSION)
-    FILE(STRINGS "${ILMBASE_INCLUDE_DIR}/OpenEXR/IlmBaseConfig.h" ILMBASE_BUILD_SPECIFICATION
-         REGEX "^[ \t]*#define[ \t]+ILMBASE_VERSION_STRING[ \t]+\"[.0-9]+\".*$")
-
-    if(ILMBASE_BUILD_SPECIFICATION)
-      if(NOT IlmBase_FIND_QUIETLY)
-        message(STATUS "${ILMBASE_BUILD_SPECIFICATION}")
-      endif()
-      string(REGEX REPLACE ".*#define[ \t]+ILMBASE_VERSION_STRING[ \t]+\"([.0-9]+)\".*"
-             "\\1" XYZ ${ILMBASE_BUILD_SPECIFICATION})
-      set("ILMBASE_VERSION" ${XYZ} CACHE STRING "Version of ILMBase lib")
-    else()
-      # Old versions (before 2.0?) do not have any version string, just assuming 2.0 should be fine though.
-      message(WARNING "Could not determine ILMBase library version, assuming 2.0.")
-      set("ILMBASE_VERSION" "2.0" CACHE STRING "Version of ILMBase lib")
-    endif()
-  endif()
-endif()
-
-
-if(ILMBASE_CUSTOM)
-  if(NOT ILMBASE_CUSTOM_LIBRARIES)
-    message(FATAL_ERROR "Custom IlmBase libraries requested but ILMBASE_CUSTOM_LIBRARIES is not set.")
-  endif()
-  set(IlmBase_Libraries ${ILMBASE_CUSTOM_LIBRARIES})
-  separate_arguments(IlmBase_Libraries)
-else()
-#elseif(${ILMBASE_VERSION} VERSION_LESS "2.1")
-  set(IlmBase_Libraries Half Iex Imath IlmThread)
-#else()
-#  string(REGEX REPLACE "([0-9]+)[.]([0-9]+).*" "\\1_\\2" _ilmbase_libs_ver ${ILMBASE_VERSION})
-#  set(IlmBase_Libraries Half Iex-${_ilmbase_libs_ver} Imath-${_ilmbase_libs_ver} IlmThread-${_ilmbase_libs_ver})
-endif()
-
-
-# Locate the IlmBase libraries
-set(IlmBase_libvars "")
-set(IlmBase_cachevars "")
-foreach(ilmbase_lib ${IlmBase_Libraries})
-  PREFIX_FIND_LIB(IlmBase ${ilmbase_lib}
-    IlmBase_library_paths IlmBase_libvars IlmBase_cachevars)
-endforeach()
-# Create the list of variables that might need to be cleared
-set(ILMBASE_CACHED_VARS
-  ILMBASE_INCLUDE_DIR ${IlmBase_cachevars}
-  CACHE INTERNAL "Variables set by FindIlmBase.cmake" FORCE)
-
-# Store the current state so that variables might be cleared if required
-set(ILMBASE_CACHED_STATE ${ILMBASE_CURRENT_STATE}
-  CACHE INTERNAL "State last seen by FindIlmBase.cmake" FORCE)
-
-# Link with pthreads if required
-if(NOT WIN32 AND EXISTS ${ILMBASE_INCLUDE_DIR}/OpenEXR/IlmBaseConfig.h)
-  file(STRINGS ${ILMBASE_INCLUDE_DIR}/OpenEXR/IlmBaseConfig.h
-    ILMBASE_HAVE_PTHREAD
-    REGEX "^[ \\t]*#define[ \\t]+HAVE_PTHREAD[ \\t]1[ \\t]*\$"
-  )
-  if(ILMBASE_HAVE_PTHREAD)
-    find_package(Threads)
-    if(CMAKE_USE_PTHREADS_INIT)
-      set(ILMBASE_PTHREADS ${CMAKE_THREAD_LIBS_INIT})
-    endif()
-  endif()
-endif()
-
-# Use the standard function to handle ILMBASE_FOUND
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(IlmBase DEFAULT_MSG
-  ILMBASE_INCLUDE_DIR ${IlmBase_libvars})
-
-if(ILMBASE_FOUND)
-  set(ILMBASE_LIBRARIES "")
-  foreach(tmplib ${IlmBase_libvars})
-    list(APPEND ILMBASE_LIBRARIES ${${tmplib}})
-  endforeach()
-  list(APPEND ILMBASE_LIBRARIES ${ILMBASE_PTHREADS})
-  if(NOT IlmBase_FIND_QUIETLY)
-    FIND_PACKAGE_MESSAGE(ILMBASE
-      "Found IlmBase: ${ILMBASE_LIBRARIES}"
-      "[${ILMBASE_INCLUDE_DIR}][${ILMBASE_LIBRARIES}][${ILMBASE_CURRENT_STATE}]"
-      )
-  endif()
-endif()
-
-# Restore the original find library ordering
-if( ILMBASE_USE_STATIC_LIBS )
-  set(CMAKE_FIND_LIBRARY_SUFFIXES ${_ilmbase_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
-endif()
-
-# Unset the helper variables to avoid pollution
-unset(ILMBASE_CURRENT_STATE)
-unset(IlmBase_include_paths)
-unset(IlmBase_library_paths)
-unset(IlmBase_generic_include_paths)
-unset(IlmBase_generic_library_paths)
-unset(IlmBase_libvars)
-unset(IlmBase_cachevars)
-unset(ILMBASE_PTHREADS)

build_files/build_environment/patches/cmake/modules/FindLogC4Plus.cmake

@@ -1,72 +0,0 @@
-# - Find LOGC4PLUS library
-# Find the native LOGC4PLUS includes and library
-# This module defines
-#  LOGC4PLUS_INCLUDE_DIRS, where to find logc4plus.h, Set when
-#                    LOGC4PLUS is found.
-#  LOGC4PLUS_LIBRARIES, libraries to link against to use LOGC4PLUS.
-#  LOGC4PLUS_ROOT_DIR, The base directory to search for LOGC4PLUS.
-#                This can also be an environment variable.
-#  LOGC4PLUS_FOUND, If false, do not try to use LOGC4PLUS.
-#
-# also defined, but not for general use are
-#  LOGC4PLUS_LIBRARY, where to find the LOGC4PLUS library.
-
-#=============================================================================
-# Copyright 2016 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If LOGC4PLUS_ROOT_DIR was defined in the environment, use it.
-IF(NOT LOGC4PLUS_ROOT_DIR AND NOT $ENV{LOGC4PLUS_ROOT_DIR} STREQUAL "")
-  SET(LOGC4PLUS_ROOT_DIR $ENV{LOGC4PLUS_ROOT_DIR})
-ENDIF()
-
-SET(_logc4plus_SEARCH_DIRS
-  ${LOGC4PLUS_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/lib/logc4plus
-)
-
-FIND_PATH(LOGC4PLUS_INCLUDE_DIR
-  NAMES
-    logc4plus.h
-  HINTS
-    ${_logc4plus_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-FIND_LIBRARY(LOGC4PLUS_LIBRARY
-  NAMES
-    logc4plus
-  HINTS
-    ${_logc4plus_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-  )
-
-# handle the QUIETLY and REQUIRED arguments and set LOGC4PLUS_FOUND to TRUE if
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(LOGC4PLUS DEFAULT_MSG
-    LOGC4PLUS_LIBRARY LOGC4PLUS_INCLUDE_DIR)
-
-IF(LOGC4PLUS_FOUND)
-  SET(LOGC4PLUS_LIBRARIES ${LOGC4PLUS_LIBRARY})
-  SET(LOGC4PLUS_INCLUDE_DIRS ${LOGC4PLUS_INCLUDE_DIR})
-ELSE()
-  SET(LOGC4PLUS_LOGC4PLUS_FOUND FALSE)
-ENDIF()
-
-MARK_AS_ADVANCED(
-  LOGC4PLUS_INCLUDE_DIR
-  LOGC4PLUS_LIBRARY
-)

build_files/build_environment/patches/cmake/modules/FindOpenEXR.cmake

@@ -1,246 +0,0 @@
-# Module to find OpenEXR.
-#
-# This module will first look into the directories defined by the variables:
-#   - OPENEXR_HOME, OPENEXR_VERSION, OPENEXR_LIB_AREA
-#
-# It also supports non-standard names for the library components.
-#
-# To use a custom OpenEXR
-#   - Set the variable OPENEXR_CUSTOM to True
-#   - Set the variable OPENEXR_CUSTOM_LIBRARY to the name of the library to
-#     use, e.g. "SpiIlmImf"
-#   - Optionally set the variable OPENEXR_CUSTOM_INCLUDE_DIR to any
-#     particularly weird place that the OpenEXR/*.h files may be found
-#   - Optionally set the variable OPENEXR_CUSTOM_LIB_DIR to any
-#     particularly weird place that the libraries files may be found
-#
-# This module defines the following variables:
-#
-# OPENEXR_INCLUDE_DIR - where to find ImfRgbaFile.h, OpenEXRConfig, etc.
-# OPENEXR_LIBRARIES   - list of libraries to link against when using OpenEXR.
-#                       This list does NOT include the IlmBase libraries.
-#                       These are defined by the FindIlmBase module.
-# OPENEXR_FOUND       - True if OpenEXR was found.
-
-# Other standarnd issue macros
-include(SelectLibraryConfigurations)
-include(FindPackageHandleStandardArgs)
-include(FindPackageMessage)
-
-if(OPENEXR_USE_STATIC_LIBS)
-  set(_openexr_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
-  if(WIN32)
-    set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
-  else()
-    set(CMAKE_FIND_LIBRARY_SUFFIXES .a )
-  endif()
-endif()
-
-# Macro to assemble a helper state variable
-macro(SET_STATE_VAR varname)
-  set(tmp_lst
-    ${OPENEXR_CUSTOM} | ${OPENEXR_CUSTOM_LIBRARY} |
-    ${OPENEXR_HOME} | ${OPENEXR_VERSION} | ${OPENEXR_LIB_AREA}
-  )
-  set(${varname} "${tmp_lst}")
-  unset(tmp_lst)
-endmacro()
-
-# To enforce that find_* functions do not use inadvertently existing versions
-if(OPENEXR_CUSTOM)
-  set(OPENEXR_FIND_OPTIONS "NO_DEFAULT_PATH")
-endif()
-
-# Macro to search for an include directory
-macro(PREFIX_FIND_INCLUDE_DIR prefix includefile libpath_var)
-  string(TOUPPER ${prefix}_INCLUDE_DIR tmp_varname)
-  find_path(${tmp_varname} ${includefile}
-    HINTS ${${libpath_var}}
-    PATH_SUFFIXES include
-    ${OPENEXR_FIND_OPTIONS}
-  )
-  if(${tmp_varname})
-    mark_as_advanced(${tmp_varname})
-  endif()
-  unset(tmp_varname)
-endmacro()
-
-
-# Macro to search for the given library and adds the cached
-# variable names to the specified list
-macro(PREFIX_FIND_LIB prefix libname libpath_var liblist_var cachelist_var)
-  string(TOUPPER ${prefix}_${libname} tmp_prefix)
-  # Handle new library names for OpenEXR 2.1 build via cmake
-  string(REPLACE "." "_" _ILMBASE_VERSION ${ILMBASE_VERSION})
-  string(SUBSTRING ${_ILMBASE_VERSION} 0 3 _ILMBASE_VERSION )
-  find_library(${tmp_prefix}_LIBRARY_RELEASE
-    NAMES ${libname} ${libname}-${_ILMBASE_VERSION}
-    HINTS ${${libpath_var}}
-    PATH_SUFFIXES lib
-    ${OPENEXR_FIND_OPTIONS}
-  )
-  find_library(${tmp_prefix}_LIBRARY_DEBUG
-    NAMES ${libname}d ${libname}_d ${libname}debug ${libname}_debug
-    HINTS ${${libpath_var}}
-    PATH_SUFFIXES lib
-    ${OPENEXR_FIND_OPTIONS}
-  )
-  # Properly define ${tmp_prefix}_LIBRARY (cached) and ${tmp_prefix}_LIBRARIES
-  select_library_configurations(${tmp_prefix})
-  list(APPEND ${liblist_var} ${tmp_prefix}_LIBRARIES)
-
-  # Add to the list of variables which should be reset
-  list(APPEND ${cachelist_var}
-    ${tmp_prefix}_LIBRARY
-    ${tmp_prefix}_LIBRARY_RELEASE
-    ${tmp_prefix}_LIBRARY_DEBUG)
-  mark_as_advanced(
-    ${tmp_prefix}_LIBRARY
-    ${tmp_prefix}_LIBRARY_RELEASE
-    ${tmp_prefix}_LIBRARY_DEBUG)
-  unset(tmp_prefix)
-endmacro()
-
-
-# Encode the current state of the external variables into a string
-SET_STATE_VAR(OPENEXR_CURRENT_STATE)
-
-# If the state has changed, clear the cached variables
-if(OPENEXR_CACHED_STATE AND
-    NOT OPENEXR_CACHED_STATE STREQUAL OPENEXR_CURRENT_STATE)
-  foreach(libvar ${OPENEXR_CACHED_VARS})
-    unset(${libvar} CACHE)
-  endforeach()
-endif()
-
-# Generic search paths
-set(OpenEXR_generic_include_paths
-  ${OPENEXR_CUSTOM_INCLUDE_DIR}
-  /usr/include
-  /usr/include/${CMAKE_LIBRARY_ARCHITECTURE}
-  /usr/local/include
-  /sw/include
-  /opt/local/include
-)
-set(OpenEXR_generic_library_paths
-  ${OPENEXR_CUSTOM_LIB_DIR}
-  /usr/lib
-  /usr/lib/${CMAKE_LIBRARY_ARCHITECTURE}
-  /usr/local/lib
-  /usr/local/lib/${CMAKE_LIBRARY_ARCHITECTURE}
-  /sw/lib
-  /opt/local/lib
-)
-
-# Search paths for the OpenEXR files
-if(OPENEXR_HOME)
-  set(OpenEXR_library_paths
-    ${OPENEXR_HOME}/lib
-    ${OPENEXR_HOME}/lib64)
-  if(OPENEXR_VERSION)
-    set(OpenEXR_include_paths
-      ${OPENEXR_HOME}/openexr-${OPENEXR_VERSION}/include
-      ${OPENEXR_HOME}/include/openexr-${OPENEXR_VERSION})
-    list(APPEND OpenEXR_library_paths
-      ${OPENEXR_HOME}/openexr-${OPENEXR_VERSION}/lib
-      ${OPENEXR_HOME}/lib/openexr-${OPENEXR_VERSION})
-  endif()
-  list(APPEND OpenEXR_include_paths ${OPENEXR_HOME}/include)
-  if(OPENEXR_LIB_AREA)
-    list(INSERT OpenEXR_library_paths 2 ${OPENEXR_LIB_AREA})
-  endif()
-endif()
-if(ILMBASE_HOME AND OPENEXR_VERSION)
-  list(APPEND OpenEXR_include_paths
-    ${ILMBASE_HOME}/include/openexr-${OPENEXR_VERSION})
-endif()
-list(APPEND OpenEXR_include_paths ${OpenEXR_generic_include_paths})
-list(APPEND OpenEXR_library_paths ${OpenEXR_generic_library_paths})
-
-# Locate the header files
-PREFIX_FIND_INCLUDE_DIR(OpenEXR
-  OpenEXR/ImfArray.h OpenEXR_include_paths)
-
-if(OPENEXR_INCLUDE_DIR)
-  # Get the version from config file, if not already set.
-  if(NOT OPENEXR_VERSION)
-    FILE(STRINGS "${OPENEXR_INCLUDE_DIR}/OpenEXR/OpenEXRConfig.h" OPENEXR_BUILD_SPECIFICATION
-         REGEX "^[ \t]*#define[ \t]+OPENEXR_VERSION_STRING[ \t]+\"[.0-9]+\".*$")
-
-    if(OPENEXR_BUILD_SPECIFICATION)
-      if(NOT OpenEXR_FIND_QUIETLY)
-        message(STATUS "${OPENEXR_BUILD_SPECIFICATION}")
-      endif()
-      string(REGEX REPLACE ".*#define[ \t]+OPENEXR_VERSION_STRING[ \t]+\"([.0-9]+)\".*"
-             "\\1" XYZ ${OPENEXR_BUILD_SPECIFICATION})
-      set("OPENEXR_VERSION" ${XYZ} CACHE STRING "Version of OpenEXR lib")
-    else()
-      # Old versions (before 2.0?) do not have any version string, just assuming 2.0 should be fine though.
-      message(WARNING "Could not determine ILMBase library version, assuming 2.0.")
-      set("OPENEXR_VERSION" "2.0" CACHE STRING "Version of OpenEXR lib")
-    endif()
-  endif()
-endif()
-
-if(OPENEXR_CUSTOM)
-  if(NOT OPENEXR_CUSTOM_LIBRARY)
-    message(FATAL_ERROR "Custom OpenEXR library requested but OPENEXR_CUSTOM_LIBRARY is not set.")
-  endif()
-  set(OpenEXR_Library ${OPENEXR_CUSTOM_LIBRARY})
-else()
-#elseif(${OPENEXR_VERSION} VERSION_LESS "2.1")
-  set(OpenEXR_Library IlmImf)
-#else()
-#  string(REGEX REPLACE "([0-9]+)[.]([0-9]+).*" "\\1_\\2" _openexr_libs_ver ${OPENEXR_VERSION})
-#  set(OpenEXR_Library IlmImf-${_openexr_libs_ver})
-endif()
-
-# Locate the OpenEXR library
-set(OpenEXR_libvars "")
-set(OpenEXR_cachevars "")
-PREFIX_FIND_LIB(OpenEXR ${OpenEXR_Library}
-  OpenEXR_library_paths OpenEXR_libvars OpenEXR_cachevars)
-
-# Create the list of variables that might need to be cleared
-set(OPENEXR_CACHED_VARS
-  OPENEXR_INCLUDE_DIR ${OpenEXR_cachevars}
-  CACHE INTERNAL "Variables set by FindOpenEXR.cmake" FORCE)
-
-# Store the current state so that variables might be cleared if required
-set(OPENEXR_CACHED_STATE ${OPENEXR_CURRENT_STATE}
-  CACHE INTERNAL "State last seen by FindOpenEXR.cmake" FORCE)
-
-# Always link explicitly with zlib
-set(OPENEXR_ZLIB ${ZLIB_LIBRARIES})
-
-# Use the standard function to handle OPENEXR_FOUND
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(OpenEXR DEFAULT_MSG
-  OPENEXR_INCLUDE_DIR ${OpenEXR_libvars})
-
-if(OPENEXR_FOUND)
-  set(OPENEXR_LIBRARIES "")
-  foreach(tmplib ${OpenEXR_libvars})
-    list(APPEND OPENEXR_LIBRARIES ${${tmplib}})
-  endforeach()
-  list(APPEND OPENEXR_LIBRARIES ${ZLIB_LIBRARIES})
-  if(NOT OpenEXR_FIND_QUIETLY)
-    FIND_PACKAGE_MESSAGE(OPENEXR
-      "Found OpenEXR: ${OPENEXR_LIBRARIES}"
-      "[${OPENEXR_INCLUDE_DIR}][${OPENEXR_LIBRARIES}][${OPENEXR_CURRENT_STATE}]"
-      )
-  endif()
-endif()
-
-# Restore the original find library ordering
-if( OPENEXR_USE_STATIC_LIBS )
-  set(CMAKE_FIND_LIBRARY_SUFFIXES ${_openexr_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
-endif()
-
-# Unset the helper variables to avoid pollution
-unset(OPENEXR_CURRENT_STATE)
-unset(OpenEXR_include_paths)
-unset(OpenEXR_library_paths)
-unset(OpenEXR_generic_include_paths)
-unset(OpenEXR_generic_library_paths)
-unset(OpenEXR_libvars)
-unset(OpenEXR_cachevars)

build_files/build_environment/patches/cmake/modules/FindTBB.cmake

@@ -1,72 +0,0 @@
-# - Find TBB library
-# Find the native TBB includes and library
-# This module defines
-#  TBB_INCLUDE_DIRS, where to find tbb.h, Set when
-#                    TBB is found.
-#  TBB_LIBRARIES, libraries to link against to use TBB.
-#  TBB_ROOT_DIR, The base directory to search for TBB.
-#                This can also be an environment variable.
-#  TBB_FOUND, If false, do not try to use TBB.
-#
-# also defined, but not for general use are
-#  TBB_LIBRARY, where to find the TBB library.
-
-#=============================================================================
-# Copyright 2016 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If TBB_ROOT_DIR was defined in the environment, use it.
-IF(NOT TBB_ROOT_DIR AND NOT $ENV{TBB_ROOT_DIR} STREQUAL "")
-  SET(TBB_ROOT_DIR $ENV{TBB_ROOT_DIR})
-ENDIF()
-
-SET(_tbb_SEARCH_DIRS
-  ${TBB_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/lib/tbb
-)
-
-FIND_PATH(TBB_INCLUDE_DIR
-  NAMES
-    tbb/tbb.h
-  HINTS
-    ${_tbb_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-FIND_LIBRARY(TBB_LIBRARY
-  NAMES
-    tbb
-  HINTS
-    ${_tbb_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-  )
-
-# handle the QUIETLY and REQUIRED arguments and set TBB_FOUND to TRUE if
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(TBB DEFAULT_MSG
-    TBB_LIBRARY TBB_INCLUDE_DIR)
-
-IF(TBB_FOUND)
-  SET(TBB_LIBRARIES ${TBB_LIBRARY})
-  SET(TBB_INCLUDE_DIRS ${TBB_INCLUDE_DIR})
-ELSE()
-  SET(TBB_TBB_FOUND FALSE)
-ENDIF()
-
-MARK_AS_ADVANCED(
-  TBB_INCLUDE_DIR
-  TBB_LIBRARY
-)

build_files/build_environment/patches/cmake/modules/SelectLibraryConfigurations.cmake

@@ -1,81 +0,0 @@
-# select_library_configurations( basename )
-#
-# This macro takes a library base name as an argument, and will choose good
-# values for basename_LIBRARY, basename_LIBRARIES, basename_LIBRARY_DEBUG, and
-# basename_LIBRARY_RELEASE depending on what has been found and set.  If only
-# basename_LIBRARY_RELEASE is defined, basename_LIBRARY, basename_LIBRARY_DEBUG,
-# and basename_LIBRARY_RELEASE will be set to the release value.  If only
-# basename_LIBRARY_DEBUG is defined, then basename_LIBRARY,
-# basename_LIBRARY_DEBUG and basename_LIBRARY_RELEASE will take the debug value.
-#
-# If the generator supports configuration types, then basename_LIBRARY and
-# basename_LIBRARIES will be set with debug and optimized flags specifying the
-# library to be used for the given configuration.  If no build type has been set
-# or the generator in use does not support configuration types, then
-# basename_LIBRARY and basename_LIBRARIES will take only the release values.
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-# Copyright 2009 Will Dicharry <wdicharry@stellarscience.com>
-# Copyright 2005-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This macro was adapted from the FindQt4 CMake module and is maintained by Will
-# Dicharry <wdicharry@stellarscience.com>.
-
-# Utility macro to check if one variable exists while another doesn't, and set
-# one that doesn't exist to the one that exists.
-macro( _set_library_name basename GOOD BAD )
-    if( ${basename}_LIBRARY_${GOOD} AND NOT ${basename}_LIBRARY_${BAD} )
-        set( ${basename}_LIBRARY_${BAD} ${${basename}_LIBRARY_${GOOD}} )
-        set( ${basename}_LIBRARY ${${basename}_LIBRARY_${GOOD}} )
-        set( ${basename}_LIBRARIES ${${basename}_LIBRARY_${GOOD}} )
-    endif( ${basename}_LIBRARY_${GOOD} AND NOT ${basename}_LIBRARY_${BAD} )
-endmacro( _set_library_name )
-
-macro( select_library_configurations basename )
-    # if only the release version was found, set the debug to be the release
-    # version.
-    _set_library_name( ${basename} RELEASE DEBUG )
-    # if only the debug version was found, set the release value to be the
-    # debug value.
-    _set_library_name( ${basename} DEBUG RELEASE )
-    if( ${basename}_LIBRARY_DEBUG AND ${basename}_LIBRARY_RELEASE )
-        # if the generator supports configuration types or CMAKE_BUILD_TYPE
-        # is set, then set optimized and debug options.
-        if( CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE )
-            set( ${basename}_LIBRARY
-                optimized ${${basename}_LIBRARY_RELEASE}
-                debug ${${basename}_LIBRARY_DEBUG} )
-            set( ${basename}_LIBRARIES
-                optimized ${${basename}_LIBRARY_RELEASE}
-                debug ${${basename}_LIBRARY_DEBUG} )
-        else( CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE )
-            # If there are no configuration types or build type, just use
-            # the release version
-            set( ${basename}_LIBRARY ${${basename}_LIBRARY_RELEASE} )
-            set( ${basename}_LIBRARIES ${${basename}_LIBRARY_RELEASE} )
-        endif( CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE )
-    endif( ${basename}_LIBRARY_DEBUG AND ${basename}_LIBRARY_RELEASE )
-
-    set( ${basename}_LIBRARY ${${basename}_LIBRARY} CACHE FILEPATH
-        "The ${basename} library" )
-
-    if( ${basename}_LIBRARY )
-        set( ${basename}_FOUND TRUE )
-    endif( ${basename}_LIBRARY )
-
-    mark_as_advanced( ${basename}_LIBRARY
-        ${basename}_LIBRARY_RELEASE
-        ${basename}_LIBRARY_DEBUG
-    )
-endmacro( select_library_configurations )

build_files/build_environment/patches/cmakelists_glew.txt

@@ -1,2 +0,0 @@
-cmake_minimum_required (VERSION 2.4)
-add_subdirectory(build/cmake)

build_files/build_environment/patches/cmakelists_hidapi.txt

@@ -1,20 +0,0 @@
-cmake_minimum_required(VERSION 2.8)
-project(hidapi)
-
-set(SRC_FILES
-	windows/hid.c
-)
-
-set(HEADER_FILES
-	hidapi/hidapi.h
-)
-include_directories(hidapi)
-add_definitions(-DHID_API_STATIC)
-add_library(hidapi STATIC ${SRC_FILES} ${HEADER_FILES})
-
-install(TARGETS hidapi DESTINATION lib)
-
-INSTALL(FILES hidapi/hidapi.h
-        DESTINATION "include"
-        )
-

build_files/build_environment/patches/cmakelists_lcms.txt

@@ -1,51 +0,0 @@
-project(lcms2)
-
-cmake_minimum_required(VERSION 2.8)
-
-include_directories(include)
-
-set(HEADERS
-	include/lcms2.h
-	include/lcms2_plugin.h
-)
-set(SOURCES
-    src/cmscam02.c
-    src/cmscgats.c
-    src/cmscnvrt.c
-    src/cmserr.c
-    src/cmsgamma.c
-    src/cmsgmt.c
-    src/cmsintrp.c
-    src/cmsio0.c
-    src/cmsio1.c
-    src/cmslut.c
-    src/cmsmd5.c
-    src/cmsmtrx.c
-    src/cmsnamed.c
-    src/cmsopt.c
-    src/cmspack.c
-    src/cmspcs.c
-    src/cmsplugin.c
-    src/cmsps2.c
-    src/cmssamp.c
-    src/cmssm.c
-    src/cmstypes.c
-    src/cmsvirt.c
-    src/cmswtpnt.c
-    src/cmsxform.c
-    src/lcms2_internal.h
-)
-
-add_library(${PROJECT_NAME} STATIC ${HEADERS} ${SOURCES})
-
-set_target_properties(${PROJECT_NAME} PROPERTIES
-	LIBRARY_OUTPUT_NAME "${PROJECT_NAME}"
-	PUBLIC_HEADER 		"${HEADERS}"
-)
-
-install(TARGETS 		${PROJECT_NAME}
-		RUNTIME         DESTINATION		bin
-        LIBRARY         DESTINATION     lib
-        ARCHIVE         DESTINATION     lib
-        PUBLIC_HEADER	DESTINATION     include
-)

build_files/build_environment/patches/cmakelists_tbb.txt

@@ -1,204 +0,0 @@
-cmake_minimum_required (VERSION 2.8)
-project(tbb CXX)
-
-if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
-  message(STATUS "Setting build type to 'Release' as none was specified.")
-  set(CMAKE_BUILD_TYPE Release CACHE STRING "Choose the type of build." FORCE)
-  set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug" "Release"
-    "MinSizeRel" "RelWithDebInfo")
-endif()
-
-include_directories(include src src/rml/include )
-
-option(TBB_BUILD_SHARED          "Build TBB shared library" ON)
-option(TBB_BUILD_STATIC          "Build TBB static library" ON)
-option(TBB_BUILD_TBBMALLOC       "Build TBB malloc library" ON)
-option(TBB_BUILD_TBBMALLOC_PROXY "Build TBB malloc proxy library" ON)
-
-if(APPLE)
-  set(CMAKE_MACOSX_RPATH ON)
-endif()
-
-file(GLOB tbb_src "${CMAKE_CURRENT_SOURCE_DIR}/src/tbb/*.cpp" "${CMAKE_CURRENT_SOURCE_DIR}/src/old/*.cpp")
-list(APPEND tbb_src ${CMAKE_CURRENT_SOURCE_DIR}/src/rml/client/rml_tbb.cpp)
-file(GLOB to_remove "${CMAKE_CURRENT_SOURCE_DIR}/src/old/test*.cpp")
-list(REMOVE_ITEM tbb_src ${to_remove})
-
-set(tbbmalloc_static_src
-  src/tbbmalloc/backend.cpp
-  src/tbbmalloc/large_objects.cpp
-  src/tbbmalloc/backref.cpp
-  src/tbbmalloc/tbbmalloc.cpp
-  src/tbbmalloc/frontend.cpp
-  src/tbb/itt_notify.cpp)
-
-set(tbbmalloc_src ${tbbmalloc_static_src})
-
-set(tbbmalloc_proxy_src
-  src/tbbmalloc/proxy.cpp
-  src/tbbmalloc/tbb_function_replacement.cpp)
-
-if (NOT APPLE)
-  add_definitions(-DDO_ITT_NOTIFY)
-else()
-  # Disable annoying "has no symbols" warnings
- set(CMAKE_C_ARCHIVE_CREATE   "<CMAKE_AR> Scr <TARGET> <LINK_FLAGS> <OBJECTS>")
- set(CMAKE_CXX_ARCHIVE_CREATE "<CMAKE_AR> Scr <TARGET> <LINK_FLAGS> <OBJECTS>")
- set(CMAKE_C_ARCHIVE_FINISH   "<CMAKE_RANLIB> -no_warning_for_no_symbols -c <TARGET>")
- set(CMAKE_CXX_ARCHIVE_FINISH "<CMAKE_RANLIB> -no_warning_for_no_symbols -c <TARGET>")
-endif()
-
-if (UNIX)
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11 -DUSE_PTHREAD")
-  if(NOT CMAKE_CXX_FLAGS MATCHES "-mno-rtm")
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mrtm")
-  endif()
-  if (APPLE)
-    set(ARCH_PREFIX "mac")
-  else()
-    set(ARCH_PREFIX "lin")
-  endif()
-  if (CMAKE_SIZEOF_VOID_P EQUAL 8)
-    set(ARCH_PREFIX "${ARCH_PREFIX}64")
-  else()
-    set(ARCH_PREFIX "${ARCH_PREFIX}32")
-  endif()
-  set(ENABLE_RTTI "-frtti -fexceptions ")
-  set(DISABLE_RTTI "-fno-rtti -fno-exceptions ")
-elseif(WIN32)
-  cmake_minimum_required (VERSION 3.1)
-  enable_language(ASM_MASM)
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /GS- /Zc:wchar_t /Zc:forScope /DUSE_WINTHREAD")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /D_CRT_SECURE_NO_DEPRECATE /D_WIN32_WINNT=0x0600 /volatile:iso")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /wd4267 /wd4800 /wd4146 /wd4244 /wd4018")
-
-  if (CMAKE_SIZEOF_VOID_P EQUAL 8)
-    list(APPEND tbb_src src/tbb/intel64-masm/atomic_support.asm
-      src/tbb/intel64-masm/itsx.asm src/tbb/intel64-masm/intel64_misc.asm)
-    list(APPEND tbbmalloc_src src/tbb/intel64-masm/atomic_support.asm)
-    set(CMAKE_ASM_MASM_FLAGS "/DEM64T=1")
-    set(ARCH_PREFIX "win64")
-  else()
-    list(APPEND tbb_src src/tbb/ia32-masm/atomic_support.asm
-      src/tbb/ia32-masm/itsx.asm src/tbb/ia32-masm/lock_byte.asm)
-    list(APPEND tbbmalloc_src src/tbb/ia32-masm/atomic_support.asm)
-    set(ARCH_PREFIX "win32")
-  endif()
-  set(ENABLE_RTTI "/EHsc /GR ")
-  set(DISABLE_RTTI "/EHs- /GR- ")
-endif()
-
-if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-  include(CheckCXXCompilerFlag)
-  check_cxx_compiler_flag("-flifetime-dse=1" SUPPORTS_FLIFETIME)
-  if (SUPPORTS_FLIFETIME)
-    add_definitions(-flifetime-dse=1)
-  endif()
-endif()
-
-# Linker export definitions
-if (WIN32)
-  add_custom_command(OUTPUT tbb.def
-    COMMAND ${CMAKE_CXX_COMPILER} /TC /EP ${CMAKE_CURRENT_SOURCE_DIR}/src/tbb/${ARCH_PREFIX}-tbb-export.def  -I ${CMAKE_CURRENT_SOURCE_DIR}/include > tbb.def
-    MAIN_DEPENDENCY ${CMAKE_CURRENT_SOURCE_DIR}/src/tbb/${ARCH_PREFIX}-tbb-export.def
-    COMMENT "Preprocessing tbb.def"
-  )
-
-  add_custom_command(OUTPUT tbbmalloc.def
-    COMMAND ${CMAKE_CXX_COMPILER} /TC /EP ${CMAKE_CURRENT_SOURCE_DIR}/src/tbbmalloc/${ARCH_PREFIX}-tbbmalloc-export.def  -I ${CMAKE_CURRENT_SOURCE_DIR}/include >   tbbmalloc.def
-    MAIN_DEPENDENCY ${CMAKE_CURRENT_SOURCE_DIR}/src/tbbmalloc/${ARCH_PREFIX}-tbbmalloc-export.def
-    COMMENT "Preprocessing tbbmalloc.def"
-  )
-else()
-  add_custom_command(OUTPUT tbb.def
-    COMMAND ${CMAKE_CXX_COMPILER} -xc++ -E ${CMAKE_CURRENT_SOURCE_DIR}/src/tbb/${ARCH_PREFIX}-tbb-export.def  -I ${CMAKE_CURRENT_SOURCE_DIR}/include -o tbb.def
-    MAIN_DEPENDENCY ${CMAKE_CURRENT_SOURCE_DIR}/src/tbb/${ARCH_PREFIX}-tbb-export.def
-    COMMENT "Preprocessing tbb.def"
-  )
-
-  add_custom_command(OUTPUT tbbmalloc.def
-    COMMAND ${CMAKE_CXX_COMPILER} -xc++ -E ${CMAKE_CURRENT_SOURCE_DIR}/src/tbbmalloc/${ARCH_PREFIX}-tbbmalloc-export.def  -I ${CMAKE_CURRENT_SOURCE_DIR}/include -o   tbbmalloc.def
-    MAIN_DEPENDENCY ${CMAKE_CURRENT_SOURCE_DIR}/src/tbbmalloc/${ARCH_PREFIX}-tbbmalloc-export.def
-    COMMENT "Preprocessing tbbmalloc.def"
-  )
-endif()
-
-add_custom_target(tbb_def_files DEPENDS tbb.def tbbmalloc.def)
-
-# TBB library
-if (TBB_BUILD_STATIC)
-  add_library(tbb_static STATIC ${tbb_src})
-  set_property(TARGET tbb_static APPEND PROPERTY COMPILE_DEFINITIONS "__TBB_BUILD=1")
-  set_property(TARGET tbb_static APPEND PROPERTY COMPILE_DEFINITIONS "__TBB_SOURCE_DIRECTLY_INCLUDED=1")
-  set_property(TARGET tbb_static APPEND_STRING PROPERTY COMPILE_FLAGS ${ENABLE_RTTI})
-  install(TARGETS tbb_static ARCHIVE DESTINATION lib)
-endif()
-
-if (TBB_BUILD_SHARED)
-  add_library(tbb SHARED ${tbb_src})
-  set_property(TARGET tbb APPEND PROPERTY COMPILE_DEFINITIONS "__TBB_BUILD=1")
-  set_property(TARGET tbb APPEND_STRING PROPERTY COMPILE_FLAGS ${ENABLE_RTTI})
-  add_dependencies(tbb tbb_def_files)
-  if (APPLE)
-    set_property(TARGET tbb APPEND PROPERTY LINK_FLAGS "-Wl,-exported_symbols_list,${CMAKE_CURRENT_BINARY_DIR}/tbb.def")
-  elseif(UNIX)
-    set_property(TARGET tbb APPEND PROPERTY LINK_FLAGS "-Wl,-version-script,${CMAKE_CURRENT_BINARY_DIR}/tbb.def")
-  elseif(WIN32)
-    set_property(TARGET tbb APPEND PROPERTY LINK_FLAGS "/DEF:${CMAKE_CURRENT_BINARY_DIR}/tbb.def")
-  endif()
-  install(TARGETS tbb DESTINATION lib)
-endif()
-
-if(CMAKE_COMPILER_IS_GNUCC)
-  # Quench a warning on GCC
-  set_source_files_properties(${CMAKE_CURRENT_SOURCE_DIR}/src/tbb/governor.cpp COMPILE_FLAGS "-Wno-missing-field-initializers ")
-elseif(MSVC)
-  # Quench a warning on MSVC
-  set_source_files_properties(${CMAKE_CURRENT_SOURCE_DIR}/src/tbb/scheduler.cpp COMPILE_FLAGS "/wd4458 ")
-endif()
-
-if(TBB_BUILD_TBBMALLOC)
-  # TBB malloc library
-  if (TBB_BUILD_STATIC)
-    add_library(tbbmalloc_static STATIC ${tbbmalloc_static_src})
-    set_property(TARGET tbbmalloc_static APPEND PROPERTY COMPILE_DEFINITIONS "__TBBMALLOC_BUILD=1")
-    set_property(TARGET tbbmalloc_static APPEND_STRING PROPERTY COMPILE_FLAGS ${DISABLE_RTTI})
-    install(TARGETS tbbmalloc_static ARCHIVE DESTINATION lib)
-  endif()
-
-  if (TBB_BUILD_SHARED)
-    add_library(tbbmalloc SHARED ${tbbmalloc_src})
-    set_property(TARGET tbbmalloc APPEND PROPERTY COMPILE_DEFINITIONS "__TBBMALLOC_BUILD=1")
-    set_property(TARGET tbbmalloc APPEND_STRING PROPERTY COMPILE_FLAGS ${DISABLE_RTTI})
-    add_dependencies(tbbmalloc tbb_def_files)
-    if (APPLE)
-      set_property(TARGET tbbmalloc APPEND PROPERTY LINK_FLAGS "-Wl,-exported_symbols_list,${CMAKE_CURRENT_BINARY_DIR}/tbbmalloc.def")
-    elseif(UNIX)
-      set_property(TARGET tbbmalloc APPEND PROPERTY LINK_FLAGS "-Wl,-version-script,${CMAKE_CURRENT_BINARY_DIR}/tbbmalloc.def")
-    elseif(WIN32)
-      set_property(TARGET tbbmalloc APPEND PROPERTY LINK_FLAGS "/DEF:${CMAKE_CURRENT_BINARY_DIR}/tbbmalloc.def")
-    endif()
-    install(TARGETS tbbmalloc DESTINATION lib)
-  endif()
-endif()
-
-if(TBB_BUILD_TBBMALLOC_PROXY)
-  # TBB malloc proxy library
-  if (TBB_BUILD_STATIC)
-    add_library(tbbmalloc_proxy_static STATIC ${tbbmalloc_proxy_src})
-    set_property(TARGET tbbmalloc_proxy_static APPEND PROPERTY COMPILE_DEFINITIONS "__TBBMALLOC_BUILD=1")
-    set_property(TARGET tbbmalloc_proxy_static APPEND_STRING PROPERTY COMPILE_FLAGS ${DISABLE_RTTI})
-    link_libraries(tbbmalloc_proxy_static tbbmalloc)
-    install(TARGETS tbbmalloc_proxy_static ARCHIVE DESTINATION lib)
-  endif()
-
-  if (TBB_BUILD_SHARED)
-    add_library(tbbmalloc_proxy SHARED ${tbbmalloc_proxy_src})
-    set_property(TARGET tbbmalloc_proxy APPEND PROPERTY COMPILE_DEFINITIONS "__TBBMALLOC_BUILD=1")
-    set_property(TARGET tbbmalloc_proxy APPEND_STRING PROPERTY COMPILE_FLAGS ${DISABLE_RTTI})
-    link_libraries(tbbmalloc_proxy tbbmalloc)
-    install(TARGETS tbbmalloc_proxy DESTINATION lib)
-  endif()
-endif()
-
-install(DIRECTORY include/tbb DESTINATION include)

build_files/build_environment/patches/cuew.diff

@@ -1,26 +0,0 @@
---- CmakeLists.txt.orig	2015-12-31 03:46:41 -0700
-+++ CMakeLists.txt	2016-04-01 13:28:33 -0600
-@@ -22,3 +22,10 @@
- 
- add_executable(testcuew cuewTest/cuewTest.c include/cuew.h)
- target_link_libraries(testcuew cuew ${CMAKE_DL_LIBS})
-+
-+install(TARGETS cuew
-+  LIBRARY DESTINATION lib COMPONENT libraries
-+  ARCHIVE DESTINATION lib/static COMPONENT libraries)
-+
-+INSTALL(FILES ${CMAKE_CURRENT_SOURCE_DIR}/include/cuew.h
-+  DESTINATION include/) 
-\ No newline at end of file
---- src/cuew.c	2016-04-01 13:41:43 -0600
-+++ src/cuew.c	2016-04-01 13:41:11 -0600
-@@ -15,7 +15,9 @@
-  */
- 
- #ifdef _MSC_VER
-+#if _MSC_VER < 1900
- #  define snprintf _snprintf
-+#endif 
- #  define popen _popen
- #  define pclose _pclose
- #  define _CRT_SECURE_NO_WARNINGS

build_files/build_environment/patches/ffi.diff

@@ -1,11 +0,0 @@
---- Makefile.in	2014-11-12 06:59:58.000000000 -0500
-+++ Makefile.in	2018-09-17 13:36:10.974086554 -0400
-@@ -600,7 +600,7 @@
- target_os = @target_os@
- target_vendor = @target_vendor@
- toolexecdir = @toolexecdir@
--toolexeclibdir = @toolexeclibdir@
-+toolexeclibdir = $(libdir)
- top_build_prefix = @top_build_prefix@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@

build_files/build_environment/patches/ffmpeg.diff

@@ -1,11 +0,0 @@
---- a/configure	2018-08-27 13:46:41.071106150 +0200
-+++ b/configure	2018-08-27 13:46:28.162765762 +0200
-@@ -6013,7 +6013,7 @@
-                                require_pkg_config libopencv opencv opencv/cxcore.h cvCreateImageHeader; }
- enabled libopenh264       && require_pkg_config libopenh264 openh264 wels/codec_api.h WelsGetCodecVersion
- enabled libopenjpeg       && { check_pkg_config libopenjpeg "libopenjp2 >= 2.1.0" openjpeg.h opj_version ||
--                               { require_pkg_config libopenjpeg "libopenjp2 >= 2.1.0" openjpeg.h opj_version -DOPJ_STATIC && add_cppflags -DOPJ_STATIC; } }
-+                               { require_pkg_config libopenjpeg "libopenjp2 >= 2.1.0" openjpeg.h opj_version "-DOPJ_STATIC $pthreads_extralibs $libm_extralibs" && add_cppflags "-DOPJ_STATIC $pthreads_extralibs $libm_extralibs"; } }
- enabled libopenmpt        && require_pkg_config libopenmpt "libopenmpt >= 0.2.6557" libopenmpt/libopenmpt.h openmpt_module_create -lstdc++ && append libopenmpt_extralibs "-lstdc++"
- enabled libopus           && {
-     enabled libopus_decoder && {

build_files/build_environment/patches/fftw3.diff

@@ -1,25 +0,0 @@
---- config.h.in	2014-03-04 11:44:58 -0700
-+++ config.h.in	2016-03-30 11:42:49 -0600
-@@ -142,9 +142,6 @@
- /* Define to 1 if you have the `gethrtime' function. */
- #undef HAVE_GETHRTIME
- 
--/* Define to 1 if you have the `gettimeofday' function. */
--#undef HAVE_GETTIMEOFDAY
--
- /* Define to 1 if hrtime_t is defined in <sys/time.h> */
- #undef HAVE_HRTIME_T
- 
---- kernel/assert.c	2014-03-04 11:41:03 -0700
-+++ kernel/assert.c	2016-04-01 09:41:05 -0600
-@@ -24,8 +24,10 @@
- 
- void X(assertion_failed)(const char *s, int line, const char *file)
- {
-+#if 0
-      fflush(stdout);
-      fprintf(stderr, "fftw: %s:%d: assertion failed: %s\n", file, line, s);
-+#endif 
- #ifdef HAVE_ABORT
-      abort();
- #else

build_files/build_environment/patches/freetype.diff

@@ -1,18 +0,0 @@
-diff -NaurBb b/CMakeLists.txt a/CMakeLists.txt
---- b/CMakeLists.txt	2018-05-01 12:45:46 -0600
-+++ a/CMakeLists.txt	2018-08-08 13:03:22 -0600
-@@ -229,9 +229,12 @@
-   endif ()
-   string(REPLACE "/undef " "#undef "
-     FTCONFIG_H "${FTCONFIG_H}")
--  file(WRITE "${PROJECT_BINARY_DIR}/include/freetype/config/ftconfig.h"
--    "${FTCONFIG_H}")
-+else()
-+  file(READ "${PROJECT_SOURCE_DIR}/include/freetype/config/ftconfig.h"
-+    FTCONFIG_H)
- endif ()
-+file(WRITE "${PROJECT_BINARY_DIR}/include/freetype/config/ftconfig.h"
-+  "${FTCONFIG_H}")
- 
- 
- # Create the options file