Compare commits

..

153 Commits

Author SHA1 Message Date
f0731bd5ac Merge branch 'master' into temp-ui-tweaks 2021-10-04 16:21:26 +02:00
2c5661682b Merge branch 'master' into temp-ui-tweaks
# Conflicts:
#	source/blender/editors/animation/time_scrub_ui.c
2021-10-04 12:59:53 +02:00
4e50c5f4fb Merge branch 'master' into temp-ui-tweaks
# Conflicts:
#	source/blender/editors/animation/time_scrub_ui.c
2021-10-04 12:58:42 +02:00
20c27a5151 Merge branch 'master' into temp-ui-tweaks 2021-09-27 16:11:27 +02:00
150b879969 Merge branch 'master' into temp-ui-tweaks 2021-09-22 16:40:14 +02:00
76c49d5884 GPencil: Fix error in previous commit
By error I commited the previous version.
2021-09-22 15:54:11 +02:00
71072a904f GPencil: Change Rotation tooltip
The tooltip was not clear about in what shading modes  works.

Related to T91467
2021-09-22 15:54:11 +02:00
cb0ab7bccc Cleanup: spelling (correct c5c8c68eec)
"iff" was intended as "if and only if". while exact use of abbreviations
isn't clear cut, I assumed this was a typo & it's not used anywhere
else in source/, expand to "only if" (suggested by Sybren).
2021-09-22 15:54:11 +02:00
7ae6f9dede Build: change make update to not print errors regarding submodule branches
Instead of trying to checkout non-existent branches and getting confusing fatal
error prints, check if the branch exists first.

Ref D12560
2021-09-22 15:54:11 +02:00
52fb64024b Geometry Nodes: support Noise Texture node
This makes the Noise Texture node available in geometry nodes.
It should behave the same as in shader node, with the exception
that it does not have an implicit position input yet. That will
be added separately.

Differential Revision: https://developer.blender.org/D12467
2021-09-22 15:54:11 +02:00
c2ab184162 Geometry Nodes: support Set Position node on instances
Previously, the node would always realize instances implicitly.
Now it can change the position of entire instances.
The Realize Instances node can be used before if the old
behavior is required.

Differential Revision: https://developer.blender.org/D12555
2021-09-22 15:54:11 +02:00
3107db97e2 make_update: Fix case where a sub-module would not have required branch.
Issue revealed by rB546314fc9669 change, also error itself exited before
that commit.

Now we do accept git command to fail when trying to checkout the
specified branch from sub-modules, and only actually error in case the
fall-back branch (aka master) cannot be properly checked out.

Thanks fot Ray molenkamp (@LazyDodo) for report and initial patch
(D12560).
2021-09-22 15:54:11 +02:00
3ea201bfa6 Geometry Nodes: new Realize Instances node
This node has a simple geometry input and output.
If the input geometry contains instances, they will be realized
into actual geometry. When there are many instances, this can
be very slow and memory intensive. Generally, instances should
only be made real when necessary, e.g. when every instance
should be deformed independently.

Differential Revision: https://developer.blender.org/D12556
2021-09-22 15:54:11 +02:00
f1f3552b9b UUID: add nil value for UUIDs
Add `BLI_uuid_nil()` that returns the nil UUID (used to indicate "not
set") and `BLI_uuid_is_nil(uuid)` to do an equality test with the nil
value.
2021-09-22 15:54:11 +02:00
03a10c31d6 UUID: fix seeding the RNG clock on macOS
On Apple machines, call `clock_gettime()` instead of `timespec_get()`.

macOS only introduced `timespec_get()` in version 10.15 (introduced
approx two years ago, so in 2019), even though the function is from C11.
2021-09-22 15:54:11 +02:00
3486a23b1e Cleanup: UUID, prevent "missing braces" warning on macOS
Add braces around initialization of sub-objects, as per the warning
suggestion on macOS.

No functional changes.
2021-09-22 15:54:11 +02:00
03fa0ef033 UUID: include 'seconds' field of current time in RNG seed
XOR the 'seconds' and 'nanoseconds' fields of the current time to seed the
RNG used for generating random UUIDs. This ensures a better seed just in
case the clock as no sub-second resolution.
2021-09-22 15:54:11 +02:00
9f576b7db8 Fix T91511: GPencil weight_get and Vertex Groups not working at expected
The API was checking the number of total weights with the first point of the stroke and this was not valid because each point can have different number of weight elemnts,
2021-09-22 15:54:11 +02:00
451d734f80 UI: rename "Save Screenshot (Area => Editor)"
The term "area" isn't normally exposed in the UI.
2021-09-22 15:54:11 +02:00
3dc53b1a29 Cleanup: spelling 2021-09-22 15:54:11 +02:00
db70f583a2 Fix: Incorrect default values for the curve trim node
The default end factor should be 1. The proper value for the default end
length is somewhat arbitrary, but it shouldn't be zero.
2021-09-22 15:54:10 +02:00
5d4ca28f8c Fix: Spline length calculation fails with no evaluated points
The case that checked whether there were evaluated edges was incorrect,
since two points are needed for an edge. Then also avoid running the
accumulation for an empty span.
2021-09-22 15:54:10 +02:00
de5b91205a Fix build error after previous commit
Incorrect renaming and use of enum after search and replace.
2021-09-22 15:54:10 +02:00
bd67caa872 Cleanup: Fix/improve variable names and comments 2021-09-22 15:54:10 +02:00
a7e75b855e Compositor: Add OIDN prefiltering option to Denoise node
It's equivalent to the OpenImageDenoise prefiltering option in Cycles.
See D12043.

Prefilter modes:
- None: No prefiltering, use when guiding passes are noise-free.
- Fast: Denoise image and guiding passes together. Improves quality when
guiding passes are noisy using least amount of extra processing time.
- Accurate: Prefilter noisy guiding passes before denoising image.
Improves quality when guiding passes are noisy using extra
processing time.

Reviewed By: #compositing, jbakker, sergey

Differential Revision: https://developer.blender.org/D12342
2021-09-22 15:54:10 +02:00
f60420116c Compositor: Fix crash exporting buffers on debug
ImBuf allocates 4 channels, use copying to support buffers
with 1 and 3 channels.
2021-09-22 15:54:10 +02:00
0d206598f7 Compositor: Fix Alpha Over node ignoring emissive colors
It was an issue on Full Frame mode only.
2021-09-22 15:54:10 +02:00
b44b39d581 Cleanup: Rename curve node enums
The enum called "interpolate" was really a choice of methods for mapping
inputs to positions on the curve, whereas the "sample" enum was used to
define a way to create a whole set of new points from the curve, without
any input parameters. The "re-sample" vs. "sample" naming makes that
distinction better.
2021-09-22 15:54:10 +02:00
638f972453 Revert "GPencil: Curvature support for length modifier."
Reason for revert: accidental push of a intermediate change locally.

This reverts commit 25e548c96b.
2021-09-22 15:54:10 +02:00
24902401ba GPencil: Curvature support for length modifier. 2021-09-22 15:54:10 +02:00
fc406830f7 Audaspace: added audio file streams functionality.
On the blender side this commit fixes importing video files with audio
and video streams that do not share the same start time and duration.

Differential Revision: https://developer.blender.org/D12353
2021-09-22 15:54:10 +02:00
c9259808a1 Py API Docs: Fix audio docs example
After new AUD API changes from 2.8x what "buffer" function used to do
has now become "cache" function (it caches a sound into RAM). Therefore,
the basic aud example should call this new "cache" function instead of
"buffer" function.

Thanks to Michael-Z-Freeman for pointing out.
2021-09-22 15:54:10 +02:00
c3045118b3 Cleanup: add missing includes 2021-09-22 15:54:10 +02:00
68e229feea Cleanup: typo 2021-09-22 15:54:10 +02:00
ea6838ec6d Fix T91461: Pose Library name filter not working
since `AssetHandle` does not have a `name_property`
(`RNA_def_struct_name_property`), and the UIList is just using the
default `uilist_filter_items_default` it simply cannot filter on names
(`RNA_struct_name_get_alloc` wont succeed).

Adding a name_property also wont work since `AssetHandle` inherits
`PropertyGroup` (which already sets name_property).

So this adds a (temporary) hack exception for RNA_AssetHandle in
uilist_filter_items_default until the design of `AssetHandle` progresses
further.

thx @Severin for additional feedback

Maniphest Tasks: T91461

Differential Revision: https://developer.blender.org/D12541
2021-09-22 15:54:10 +02:00
d612181827 UI: Always Create Asset Previews
This patch allows Asset Browser previews to be made regardless
of the setting of the (unrelated) "File Preview Type" Preference.

See D12484 for more details.

Differential Revision: https://developer.blender.org/D12484

Reviewed by Julian Eisel
2021-09-22 15:54:10 +02:00
7b1a1bc8eb Geometry Nodes: hide Attribute Remove node when fields are enabled 2021-09-22 15:54:10 +02:00
6092fa3702 Fix (harmless) mistake in recent new Append code.
This code path is not yet used so no harm, but that was a fairly nasty
potential crash-generator.
2021-09-22 15:54:10 +02:00
a17e895d7d Cleanup: clang-tidy warnings in UUID code
Use C++ version of C headers, and avoid static function call on instance.

No functional changes.
2021-09-22 15:54:10 +02:00
5e5a98e51a Cleanup: fix memory leak 2021-09-22 15:54:10 +02:00
Henrik Dick
8129dd3189 Fix T91481: Grease Pencil Layer Double Transformations
Use the inverse of the grease pencil object. This patch fixes the issue for bones and objects.

Maniphest Tasks: T91481

Differential Revision: https://developer.blender.org/D12539
2021-09-22 15:54:10 +02:00
e831f41d0b Blenlib: introduce a UUID type
Add `BLI_uuid` and `DNA_uuid_types.h` with a UUID implementation
following RFC4122 (https://datatracker.ietf.org/doc/html/rfc4122.html).

The following features are implemented:
- A struct of 128 bits that can be used in DNA definitions.
- Generation of version 4 UUIDs, that is, purely random ones.
- UUID equality function.
- String to UUID and UUID to string conversion functions that are
  compatible with RFC4122.
- C++ stream operator that outputs the UUID as string.

This UUID will be used by the asset system, to uniquely identify asset
catalogs.

Reviewed By: Severin, jacqueslucke

Differential Revision: https://developer.blender.org/D12475
2021-09-22 15:54:10 +02:00
fe2efb6866 Fix T91448: GPencil Fill simplify not working in render
The simplify was hardcode to be disabled in render.
2021-09-22 15:54:10 +02:00
2f06f35513 Fix T85564: FCurve modifier zero influence on restrict range borders
When using FModifier `Restrict Frame Range`, the resulting influence was
zero being exactly on `Start` / `End` range borders (so borders were
**exclusive**).
This made it impossible to chain FModifers together (forcing the user to
specify values slightly below the desired border in following
FModifiers).
This is now corrected to be **inclusive** on Start / End range borders.

Before
{F10234864}
After
{F10234865}
Testfile
{F10234866}

In the case of touching open borders (so [frame A frame B] followed by
[frame B frame C]) both modifiers are evaluated (in stack order).
If the later modifier has full influence (and is not additive) this simply
means the result is the same as the later modifier's value.
If influences below 1 are used (or modifiers are additive) both modifier's
values are interpolated/added accordingly.

technical notes:
- this was caused by the introduction of FModifier Influence/BlendIn-Out
in rB185663b52b61.
- for comparison, see other occurrences of
`FMODIFIER_FLAG_RANGERESTRICT`.
- the following conditions in `eval_fmodifier_influence` for blend in/
out have been changed accordingly.

Maniphest Tasks: T85564

Differential Revision: https://developer.blender.org/D10401
2021-09-22 15:54:10 +02:00
f91718bdd9 WM: expose the "any" state of KeyMapItem modifiers
Change KeyMapItem.alt/ctrl/shift/oskey to integer types,
where -1 is used to ignore the modifier when matching key-map items.

It was only possible to set all modifiers to -1 at once from RNA
using the 'any' property.
Afterwards individual modifiers could be set back to true/false.
Although these key-map items could not be exported/imported.

Exposing the values directly avoids the need for cumbersome workarounds.
2021-09-22 15:54:10 +02:00
c0fb68a93d Cleanup: remove KM_MOD_SECOND & KM_SHIFT2, KM_CTRL2.. etc
These were added in a1c8543f2a (2007)
but never used.
Nor did they have any meaning in practice.

Note that versioning keymap items isn't needed as these values were
never set. The code-paths that set these values also set KM_MOD_FIRST
causing `keymap_event_set` to only ever assign values of 0 or 1.

These flags complicate further exposing KM_ANY (-1)
which is also a valid value for modifiers.
2021-09-22 15:54:10 +02:00
13a0a0d592 UI: expose "Lasso Select" & "Extrude to Cursor" in menus
- Show "Lasso Select" in menus (along with Box & Circle select)
- Show "Extrude to Cursor" (along with other extrude actions).
- Rename operators that add/extrude on Ctrl-Click
  since their names were inconsistent.

This is mainly for discoverability.
2021-09-22 15:54:10 +02:00
ff3345a554 UI: enable the depend-on-cursor flag for some operators
- Bend (Transform).
- Extrude to Cursor.
- Lasso Select (related operators such as node-cut links, mask.. etc).
- Rip Mesh / UV's.
- Vertex/Edge Slide.
2021-09-22 15:54:10 +02:00
9ec46174a0 UI: split screenshot area into a separate operator
While the screenshot operator showed an "Area" option,
it wasn't usable from the main menu (unless accessed via menu search).

Split screenshot area into an operator that depends on cursor.
2021-09-22 15:54:10 +02:00
500d0e1fda UI: wait for input for operators that depend on cursor location
Support waiting for input so operators that depend on the
cursor location are usable from menus / buttons.

Use an operator type flag which the user interface code checks for,
waiting for input when run from a menu item.

This patch only supports this feature, there are no functional changes.

The motivation for this change is discoverability since some actions
were either hidden or broken when accessed from menus
(where the behavior of the operator depended on the menu location).

In general, waiting for input is *not* an efficient way to access tools,
however there are over 50 operators with a "wait_for_input" property
so this isn't introducing a new kind of interaction,
rather exposing this in a way that does not need to be hard-coded into
each operator, or having modal callbacks added for the sole purpose
of waiting for input.

Besides requiring boiler plate code using a "wait_for_input" property
has the added down-side of preventing key shortcuts from showing.
Only the menu items will enable the property,
causing them not to match key-map items.

Reviewed By: Severin

Ref D12255
2021-09-22 15:54:10 +02:00
711673caff Fix: Nodes modifier ignores input value with new property missing
An issue with the previous commit-- the default value of the type was
used instead of the property value when the "use_attribute" property
was missing.
2021-09-22 15:54:10 +02:00
2e309eb86a Geometry Nodes: Add a toggle to use attributes as input values
This adds a toggle to node group inputs exposed in the modifier to use
an attribute instead of a single value. When the toggle is pressed, the
button switches to a text button to choose an attribute name. Attribute
search isn't implemented here yet.

One confusing thing is that some values can't be driven by attributes
at all, like the size of a primitive node. In that case, we should have
a node warning, but that will be separate since it's more general.
We can also have an option to turn off this toggle in node group
input settings.

The two new properties for each input are stored with the same name
as the value, but with `"_use_attribute"` and `"_attribute_name"``
suffixes. The properties are not added for socket types that don't
support attribute input, like object sockets.

Differential Revision: https://developer.blender.org/D12504
2021-09-22 15:54:10 +02:00
f4ee2de310 UI: Automatic Blend Thumbnail Selection
Adds an "Auto" option to blend thumbnail types that will automatically
use Screenshot if there is no camera and 3dview, or workbench render
with shading settings from the largest 3dview.

See D12407 for more details.

Differential Revision: https://developer.blender.org/D12407

Reviewed by Campbell Barton
2021-09-22 15:54:10 +02:00
a241b69982 Cleanup: Pass const mesh argument
Also remove unnecessary parantheses.
2021-09-22 15:54:10 +02:00
b4a6d70789 Cleanup: Move mesh_convert.c to C++
This should allow easier changes when it's helpful to use C++ types.
The diff is for a test on the buildbot.

Differential Revision: https://developer.blender.org/D12528
2021-09-22 15:54:10 +02:00
89fe4220bc UI: Remove Menus & Show Wait Cursor When Saving
When saving blend files close any menus that might be open, show
"waiting" mouse cursor right away, before creating preview.

See D12507 for more details.

Differential Revision: https://developer.blender.org/D12507

Reviewed by Campbell Barton
2021-09-22 15:54:10 +02:00
2ea4b17c95 Cleanup: Remove unnecessary manual of move constructor
Turns out this isn't actually necessary.
2021-09-22 15:54:10 +02:00
f25c1f29b0 Geometry Nodes: Transfer attributes in the curve to mesh node
This patch allows point and spline attributes to be transferred to the
mesh generated by the curve to mesh node. All dynamic named and
anonymous attributes are transferred. So a user-created attribute will
be transferred, but "radius", "tilt" or the handle position attributes
won't be transferred by default and will need to be copied first.
This trade-off is made for performance, since most of the time, users
won't need these attributes copied.

Generally, attributes are transferred to the point/vertex domain.
However, if they have the same name as a built-in mesh attribute that
only exists on a different domain, like "shade_smooth", then they can
be transferred directly to that domain as well. Conversion directly to
the face corner domain is not necessary because there are no builtin
face corner attributes. I see this conversion directly to other domains
as an optimization we could use behind the scenes in the future as well,
when named attributes are less common.

For performance, I haven't tested which of the following is better:
```
for each spline combination:
    for each attribute:

for each attribute:
    for each spline combination:
```
For now I used the existing loop to avoid more threading overhead.

Differential Revision: https://developer.blender.org/D12363
2021-09-22 15:54:10 +02:00
084719ff1b Geometry Nodes: Simplify using OutputAttribute in a vector
Store the optional temporary span storage as a unique_ptr and move
it in the move constructor, to avoid the need to add a special move
constructor that clears the "show_warning" fields from it. Maybe this
is very slightly slower, but we'll need this class less often in the future
anyway.
2021-09-22 15:54:10 +02:00
23feb6770a Cleanup: Add built-in check for an attribute ID 2021-09-22 15:54:10 +02:00
7f8ba9dbb4 Rename App Menu to Blender Menu
"App" is a name reserved for the application templates at the moment.
It may become its own term in the near future if Templates are separated
from "Apps".

So since this is a name not exposed to the users we should renamed it
sooner than later.

Note that this will require scripts to update since the name of the
class is renamed here.

This also requires an update in the User Manual.

Differential Revision: https://developer.blender.org/D12523
2021-09-22 15:54:10 +02:00
fa165fc19e Assets: Recursive reading of asset libraries
With this, asset libraries can be directory structures and all assets in
sub-directories will show up in an Asset Browser.

With complex directory structures and many .blend files inside, asset
library reading will be quite slow for now. There's initial work being
done to introduce indexing for this (T82979), other optimizations are
being discussed as well.

Addresses T91406.

Differential Revision: https://developer.blender.org/D12139
2021-09-22 15:54:10 +02:00
1cf11da339 Hide empty keymap warnings when running a template 2021-09-22 15:54:10 +02:00
301c0c247c App Settings: Edge Resize
This prevents both editor resize as well as regions (e.g., the toolbar).

Note: This option is not visible in the UI.

Differential Revision: D12516
2021-09-22 15:54:10 +02:00
66e0182b80 App Settings: Regions Visbility Toggle
The toggle that allow users to "show" the region (header, toolbar, ...)
when it is collapsed can now be configured for the apps.

Note: This option is not visibile in the UI.

Differential Revision: D12516
2021-09-22 15:54:10 +02:00
4a538f0add Rename show_layout_ui > show_corner_split and remove from UI
This breaks API compatibility. However we are now grouping this setting
in the proper section (preferences.apps), so scripts had to update anyways.

So they may as well do it for the final name.

The reason to remove from the UI is that this is intended for app setup,
and as such it should not be exposed to final users until we have apps
better presented (for 3.1 hopefully).

Differential Revision: D12516
2021-09-22 15:54:10 +02:00
15acdf04d9 Cleanup: Rename USER_APP_LOCK_UI_LAYOUT
There will be other settings that lock other aspects of the
UI layout (e.g., resizing of editors). So better to name
this setting what it actually handles (the corners).

New name: USER_APP_LOCK_CORNER_SPLIT

Differential Revision: D12516
2021-09-22 15:54:10 +02:00
b4100bfa59 Cleanup: WM append code: de-duplicate post-make-local process a bit. 2021-09-22 15:54:10 +02:00
d82a73c67a Fix: properly implement the 'only append' execption case for WorkSpaces.
Add needed extra flag and utils to IDType to mark and check an ID type
as only appendable.

Note that this is only a loose user-level enforcement currently, in any
case you need to be able to link an ID to append it currently, so for
low-level code this does not really matter.

Currently only WorkSpace and Screen ID types are marked with the new
`IDTYPE_FLAGS_ONLY_APPEND` flag.
2021-09-22 15:54:09 +02:00
05b2ed822d Cleanup/Fix outliner 'make local' code.
While likely harmless, this code was doing extremely bad thing,
by-passing the whole lower-level `BKE_lib_id_make_local` call in case it
would fail and deciding by itself to forcefully make the given ID local.
Bad. Very, very, very bad.
2021-09-22 15:54:09 +02:00
71e29bf0b0 Cleanup: no need to clear new flags and pointers from whole Main when making a single ID local. 2021-09-22 15:54:09 +02:00
83449ab7d0 Cleanup: Comment about shpaekey being treated as embedded IDs in BKE_id_newptr_and_tag_clear. 2021-09-22 15:54:09 +02:00
9cee00621e Cleanup: Add comment about 'make_local' callback of Brush doing bad thing.
Callbacks in IDTypeInfo should never affect other IDs if they are not
embedded.

We break this rule in some cases, at least each of those should be
clearly commented about and get some security checks to try to avoid
unexpected issues as much as possible.
2021-09-22 15:54:09 +02:00
7df30bb5f6 Cleanup: Rename BKE_id_clear_newpoin to BKE_id_newptr_and_tag_clear. 2021-09-22 15:54:09 +02:00
abd31665dd Fix/refactor BKE_id_clear_newpoin and BKE_main_id_newptr_and_tag_clear.
Those were not clearing embdeed IDs flags and `newid` pointers at all...
2021-09-22 15:54:09 +02:00
68b306156c IDManagement: refactor: Remove 'test' part from BKE_lib_id_make_local.
Mixing testing and actual action in a single function is just not a good
way to do things, and the 'testing' feature is not used anywhere
anymore, time to get rid of it.
2021-09-22 15:54:09 +02:00
05cdd5f177 IDType: Add BKE_idtype_idcode_is_localizable.
This is the same as `BKE_idtype_idcode_is_linkable` currently, used only
in one place in UI code of IDtemplate.
2021-09-22 15:54:09 +02:00
a0949f0c30 IDType: Cleanup: Remove useless IDTYPE_FLAGS_NO_MAKELOCAL.
This flag became a full duplicate of `IDTYPE_FLAGS_NO_LIBLINKING`, which
is a good thing (don't think we ever want to be able to link some data,
without being able to make it local...).

So we can now remove it and use `IDTYPE_FLAGS_NO_LIBLINKING` instead.
2021-09-22 15:54:09 +02:00
a81e121d8d Fix ID-property UI versioning skipping nested meta-strips 2021-09-22 15:54:09 +02:00
5d3d2d839d Fix security popup re-displaying after undo
Don't reset these flags when loading a file (or undoing)
rely on BPY_python_reset to reset the flags.
2021-09-22 15:54:09 +02:00
5be80aea08 Fix memory leak if an error occurred assigning id-property sequence 2021-09-22 15:54:09 +02:00
081dc2cc92 Fix bisect gizmo offset while dragging 2021-09-22 15:54:09 +02:00
2923409795 GPencil: Fix dash modifier reading error.
The reference for parent modifier in segment data is not assigned. Now fixed.
2021-09-22 15:54:09 +02:00
14a9a3687b Cleanup: Use function to mark mesh normals dirty 2021-09-22 15:54:09 +02:00
0e1270ea9f Cleanup: Remove duplicate warning from subdivision surface node 2021-09-22 15:54:09 +02:00
5839e55295 Geometry Nodes: Hide values for selection inputs
Toggling the selection off in the node is the same as muting it,
so exposing it there doesn't help, and makes it less clear that it's
meant to be used as a field.
2021-09-22 15:54:09 +02:00
3f0d9a89d3 Fix: Division by zero in curve spiral primitive node 2021-09-22 15:54:09 +02:00
Johnny Matthews
0706f7a08a Splines: Add a method for reversing a Spline
This moved the spline reversing logic out of the Curve Reverse geometry
node and into the spline class. This allows a spline to reverse itself
with a call to `my_spline.reverse()`

The base class will reverse position, radii & tilt, while specialized
versions are created for Bezier and Nurbs splines to reverse the
additional data that these classes encapsulate.

Differential Revision: https://developer.blender.org/D12501
2021-09-22 15:54:09 +02:00
a969417f37 Tests: Updated test message for Directory Not Found 2021-09-22 15:54:09 +02:00
52bbd01895 Fix broken WorkSpace use after recent refactor of append code.
Essentially, Workspace (and Screen) types were defined as not
localizable.

In previous code it happended to work by mere chance (code path taken in
`BKE_library_make_local` was conviniently skipping the call to
`BKE_lib_id_make_local` in that case, hence not checking for
`IDTYPE_FLAGS_NO_MAKELOCAL` flag of the localized ID type).

This is a total abuse of this IDType flag, for now removing it.

That specific case (IDtype appendable but nor linkable) requires its own
proper flag, this will be tackled in a later commit.

Issue introduced in rB3be5ce4aad5e.
2021-09-22 15:54:09 +02:00
7e87a6963c Fix missing passes result when rendering multiple views
Caused by the lazily pass pixels allocation which didn't reset
allocation state of the render result.

Demo file: XXX
2021-09-22 15:54:09 +02:00
ba5859a5d7 Fix crash in 'drag asset' case in new append code from yesterday.
Scene and related pointer parameter can be NULL in link/append code, in
which case there is no instantiation of new objects/collections/obdata.

Link code in blendloader was already checking that, new instantiation
code in WM area from yesterday did not.

Issue introduced by rB3be5ce4aad5e.
2021-09-22 15:54:09 +02:00
Johnny Matthews
149501c774 BLI: Add a reverse method to MutableSpan
Add a method that allows a MutableSpan to reverse itself. This reverses
the data in the original span object. This is a first step in extracting
some functionality from nodes and making it more general.

Differential Revision: https://developer.blender.org/D12485
2021-09-22 15:54:09 +02:00
8ec6b1fc4c Geometry Nodes: Add fields version of material nodes
This commit moves the old material nodes to a "legacy" folder and adds
versions of the nodes that work with fields.

The "Select by Material" node is a field node now, so it doesn't have
a geometry output. This is an improvement because there are fewer links
to connect, and it's more easily usable in different situations.
It's also called "Material Selection", since it's more of an input
than an action now.

It's sometimes necessary to use the attribute capture node to get a
more predictable interpolation to mesh faces. This is because the
selection field input is always evaluated on the face domain, so
attribute inputs are interpolated before they are booleans, so they
cannot use the new interpolations from rB5841f8656d9580d7b9.

Differential Revision: https://developer.blender.org/D12456
2021-09-22 15:54:09 +02:00
f3241b8e34 Geometry Nodes: Add special domain interpolation for selections
The generic domain interpolation algorithms didn't quite work for
selections. The interpolation would do unexpected things that
were different than the results in edit mode. The new behavior
is supposed to be the same as edit mode, although we also have
to handle face corner selections here.

Currently the code assumes that all boolean attributes should be
handled that way. I'm not sure of why that wouldn't be the case,
but if we ever need non-selection boolean attributes, that could
be supported too.

Differential Revision: https://developer.blender.org/D12488
2021-09-22 15:54:09 +02:00
83bdfba499 Cleanup: avoid passing redundant parameter 2021-09-22 15:54:09 +02:00
e31d6560a2 Nodes: refactor socket declarations
This commits adds a few common flags to `SocketDeclaration`
so that they are available for all socket types (hide label, hide
value, is multi input). This allows porting over the remaining
geometry nodes to the new declaration system.

Furthermore, this commit separates the concepts of the socket
declaration and corresponding builders. The builders are used
by nodes to declare which sockets they have (e.g. `FloatBuilder`).
The ready build socket declarations can then be consumed by
other systems such as the versioning code. Both use cases
need different APIs and those will change for independent reasons,
so it makes sense to separate the classes.
2021-09-22 15:54:09 +02:00
aeeb7c82c6 Gizmo: add flag to hide the gizmo group during interaction
This allows a hack to be removed that temporarily overwrote
the 3D views gizmo display flag.

Also reverse change from fb27a9bb98
that runs poll on modal gizmo groups as there is some risk
that the poll function unlinks the gizmo.
2021-09-22 15:54:09 +02:00
bb310ff14e Cleanup: unused variable 2021-09-22 15:54:09 +02:00
9d63273bf8 Fix T91421: Length modifier bake influence check.
Reviewed By: Antonio Vazquez (antoniov)

Differential Revision: https://developer.blender.org/D12496
2021-09-22 15:54:09 +02:00
1a677512b7 Fix Asset Browser cannot open containing file anymore
In {rB9cff9f9f5df0} asset_library was renamed → asset_library_ref.

Missed to update this in assets.py.

Differential Revision: https://developer.blender.org/D12497
2021-09-22 15:54:09 +02:00
6312f82324 Geometry Nodes: multi threaded field evaluation
This adds a new `ParallelMultiFunction` which wraps another multi-function
and evaluates it with multiple threads. The speeds up field evaluation
quite a bit (the effect is most noticeable when the number of evaluations
and the field is large).

There are still other single-threaded performance bottlenecks in field
evaluation that will need to be solved separately. Most notably here
is the process of copying the computed data into the position attribute
in the Set Position node.

Differential Revision: https://developer.blender.org/D12457
2021-09-22 15:54:09 +02:00
1f8eab534d Gizmo: show groups flagged with SHOW_MODAL_ALL during interaction
Follow up to fix for T73684,
which allowed some modal gizmos to hide all others.

Also resolve an issue from 917a972b56
where shear the shear gizmo would be visible during interaction.

Internally there are some changes to gizmo behavior

- The gizmo with modal interaction wont draw if it's poll function fails.
- The WM_GIZMOGROUPTYPE_DRAW_MODAL_ALL flag now causes these gizmo
  groups to draw when another group is being interacted with.
2021-09-22 15:54:09 +02:00
dea0dbc5ef Cleanup: replace defines with functions 2021-09-22 15:54:09 +02:00
0b8524c578 Cleanup: correct tracker ID in comment 2021-09-22 15:54:09 +02:00
8c61473869 GPencil: Dot dash modifier.
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.

The values in each segment can all be key-framed to make animations.

Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)

Differential Revision: http://developer.blender.org/D11876
2021-09-22 15:54:09 +02:00
4f65ad890b LineArt: Automatic crease with flat/smooth faces.
This allows crease lines to be automatically hidden on smooth surfaces, also provided options for:

- Showing crease on marked sharp edges.
- Force crease detection on smooth surfaces.

Reviewed By: Antonio Vazquez (antoniov)

Differential Revision: http://developer.blender.org/D12051
2021-09-22 15:54:09 +02:00
584b8a0def PyDocs: Update theme to latest version 2021-09-22 15:54:09 +02:00
47a7f02339 UI: Addition Changes to Freestyle Properties
- Material Properties: Use split column layout
- Remove the redundent term 'Options'
- Remove the redundent term 'Freesttle'
2021-09-22 15:54:09 +02:00
c0aa938931 Fix T89241: Scale to fit overflows into a second line 2021-09-22 15:54:09 +02:00
2aca22d60f Cleanup: spelling 2021-09-22 15:54:09 +02:00
926e839f80 Cleanup: doxy sections, parameter syntax 2021-09-22 15:54:09 +02:00
4ddce5f1c4 Fix: Use after free in spreadsheet attribute column ID
A temporary string was created in the attribute_foreach callback
and used in a map at a higher scope. When the callback finished,
the string went out of scope, was freed, then the elements in the
set pointed to freed memory.
2021-09-22 15:54:09 +02:00
Christoph Lendenfeld
7a373ecbf5 Fix T89027: "factor" field in pose breakdowner not updated
After applying the pose breakdowner,
the "factor" slider in the redo panel wasn't set to the correct value
This would cause the pose to jump around
once you start dragging the slider

Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12187
Ref: D12187
2021-09-22 15:54:09 +02:00
5a8766180d LibLink: Enable unittest that was previously failing in append case.
Previous commit fixed it.
2021-09-22 15:54:09 +02:00
cef3d4225c LibLink: New Append code.
This commit fully refactors the way linked IDs are made local when
appended.

Previously, `BKE_library_make_local` was (ab)used for this task, but it
was missing some contextual data and doing complex processing to try to
work around this, with limited sucess. Further more, it was nearly
impossibe to extend (e.g. to get new append behaviors necessary for the
asset project).

The new code is a dedicated append step in WM linking process.

NOTE: BPY API (`libray.load()` context manager) uses its own code here,
which still relies on `BKE_library_make_local` for appending.
Unfortunately, merging those two different code paths is not trivial so
for now this API will remain unchanged.

Fix T55629: Append already linked Data is impossible.
2021-09-22 15:54:09 +02:00
abe1665569 ID management: Add new version of relink_to_newid using proper new remapping code.
Current `BKE_libblock_relink_to_newid` is using its own simplistic,
limited and not really correct version of ID remapping.

While doing a full replacement would have been ideal, this is
risky/time-constrained for Blender 3.0 release, so for now we'll have
both versions co-existing.
2021-09-22 15:54:09 +02:00
86761e4950 Cleanup: fix inconsistent parameter name
Found by clang-tidy.
2021-09-22 15:54:09 +02:00
494469897c Nodes: cache node declaration on node
Previously, it was necessary to rebuild the node declaration
every time it was used. Now it is cached per node for easy
and fast access.

For more details on what this is, look at the comment in
`DNA_node_types.h`.

Differential Revision: https://developer.blender.org/D12471
2021-09-22 15:54:09 +02:00
205ccb8bbe Cleanup: simplify resource scope methods
Previously, a debug name had to be passed to all methods
that added a resource to the `ResourceScope`. The idea was
that this would make it easier to find certain bugs. In reality
I never found this to be useful, and it was mostly annoying.
The thing is, something that is in a resource scope never leaks
(unless the resource scope is not destructed of course).

Removing the name parameter makes the structure easier to use.
2021-09-22 15:54:09 +02:00
cbd43cedc3 Fix: use type name instead of variable name
That was a typo in rBfd60f6713a9d9e6f7d706b53bf1311f2f1cd9031.
2021-09-22 15:54:09 +02:00
975d21a1a2 Functions: support optional outputs in multi-function
Sometimes not all outputs of a multi-function are required by the
caller. In those cases it would be a waste of compute resources
to calculate the unused values anyway. Now, the caller of a
multi-function can specify when a specific output is not used.
The called function can check if an output is unused and may
ignore it. Multi-functions can still computed unused outputs as
before if they don't want to check if a specific output is unused.

The multi-function procedure system has been updated to support
ignored outputs in call instructions. An ignored output just has no
variable assigned to it.

The field system has been updated to generate a multi-function
procedure where unused outputs are ignored.
2021-09-22 15:54:08 +02:00
14af051591 Geometry Nodes: fix memory leak for multi input sockets 2021-09-22 15:54:08 +02:00
52ee98859d Fix T90862: Texts in Outliner can have wrong icon
In contrast to the Filebrowser, the Outliner (Blender File view) did not
distinguish icons for text-based formats (if they have a filepath this
can be done though).

Maniphest Tasks: T90862

Differential Revision: https://developer.blender.org/D12347
2021-09-22 15:54:08 +02:00
c1e21847b9 Doc: expand on comment for why bound-box access could cause issues 2021-09-22 15:54:08 +02:00
296814ab92 UI: keep navigation gizmos visible during modal operators
Hiding viewport navigation gizmos caused the UI to "flicker"
unnecessarily, the axis could also be useful as a reference.

Resolves T73684
2021-09-22 15:54:08 +02:00
0da8a60a37 Update RNA to User Manual Mappings 2021-09-22 15:54:08 +02:00
667e24d8a0 Asset Template: Extra UI options
This allow users to show/hide:
* Library name / refresh.
* Assets names.
* Filter.

To set them in Python use:
display_options={'NO_NAMES', 'NO_FILTER', 'NO_LIBRARY'}

With contributions by Julian Eisel.

Differential Revision: https://developer.blender.org/D12476
2021-09-22 15:54:08 +02:00
84d5be6993 Cleanup: Remove duplicate code
Class SEQUENCER_PT_overlay as defined twice.
2021-09-22 15:54:08 +02:00
Germano Cavalcante
42aaff79db Fix T90736: Problem applying scale to curves
Curve Points of handle of type `Auto` on curves not uniformly scaled
cause the shape of the curve to be modified after applying the scale.

So change these handles to `Aligned` in these cases.

Reviewed By: campbellbarton

Maniphest Tasks: T90736

Differential Revision: https://developer.blender.org/D12281
2021-09-22 15:54:08 +02:00
0647f4f511 Cleanup: Remove unused variable 2021-09-15 01:50:42 +02:00
a4b39da6c7 UI: Use right-arrow icon for sub menus 2021-09-15 01:47:47 +02:00
ae42e4be1d UI: Match subpanels look with regular panels
By having coloured headers and offset the background.

TODO: Add margin to the bottom on the last subpanel.
2021-09-15 01:47:35 +02:00
8085f1e320 Merge branch 'master' into temp-ui-tweaks 2021-09-13 16:54:18 +02:00
cb23adf94b Merge branch 'master' into temp-ui-tweaks 2021-09-06 14:06:25 +02:00
ba7f03c1bb UI: Align panel titles
WIP: Experiment with shifting the panel titles slightly to the right
matching panels with checkboxes/icons in the header.
2021-09-03 20:06:43 +02:00
e262b00918 UI: Make panel titles text size same as labels
With panels now being more defined boxes, having a different size for the
panel title adds considerable noise.
2021-09-03 20:04:57 +02:00
48c2c7b1b4 UI: Dim collapse/expand icon on panels 2021-09-03 20:03:29 +02:00
83b342fd91 UI: Less prominent drag widget on panels
* Use 2 rows of 3 boxes per row, instead of 4.
* Slightly smaller
* Dimmer
2021-09-03 20:02:50 +02:00
18a3b9b238 Merge branch 'master' into temp-ui-tweaks 2021-09-03 16:39:01 +02:00
870404455b UI: Add margin to panels
Add some breathing space between the panel boundaries and properties/regions.

Make use of the style->panelouter property that hasn't been used in a while.
Also slight tweaks to boxspace and templatespace style properties so they
are multiples of 2 and operations on them round better.
2021-08-28 02:21:07 +02:00
323997ace3 UI: Disable emboss on box widgets
These are meant to be contour for an area flush with the background,
having emboss hardcoded on the widget prevents this.
2021-08-28 01:48:55 +02:00
72003be8fb Fix stack buffer overflow asan warning 2021-08-27 14:59:55 -05:00
82323cafb9 UI: Fix dark and light themes
Mainly so it doesn't look broken to people testing out the branch, namely
the background of radio buttons was pure white, and separator in menus pure black.

Also minor tweaks to the default theme.
2021-08-27 20:57:26 +02:00
7e4af18960 UI: Use rounded corners for panels and subpanels 2021-08-24 19:27:25 +02:00
f3b2cbcb81 UI: Separate each choice inside radio buttons
Add some room between the choices. This way we can give the background and
non-active options the same color and make it look more like only one choice
can be active at a time.

This is in an effort to make the radio buttons and toggle buttons look different.
Currently in Blender they looked the same even though radio buttons only allow
one active option at a time, while toggles can be have multiple.
2021-08-24 18:54:20 +02:00
811dc12e34 UI: Make use of menu item theme roundness
Use theme preference instead of hardcoded square corners.
2021-08-24 02:48:43 +02:00
1cba89572f UI: Use Outline color of menu item for separator
Instead of forcing a transparent shadeof the text color.
2021-08-24 02:46:43 +02:00
ad12ff5376 UI: Adjust outline color of active default buttons
Simply darken slightly the already used outline color. On light themes it prevents too bright outlines on hover.
2021-08-24 02:31:27 +02:00
49777cb729 UI: Support alpha in Value Slider widget
The alpha value was being ignored even though the item property could be set.
2021-08-24 02:13:32 +02:00
a64d281528 UI: Do not rotate vertical scale indicators
In animation editors with vertical scale indicators, such as Graph Editor
or Drivers, display the values aligned to the view.
2021-08-24 02:03:07 +02:00
b9fa39c8e9 UI: Improve contrast on playhead
Add a dark (background coloured) outline around it.
2021-08-20 03:13:24 +02:00
a62ca11d7f UI: Use arrow icon to collapse/expand panels 2021-08-20 00:48:26 +02:00
8115 changed files with 530815 additions and 587506 deletions

View File

@@ -180,7 +180,6 @@ ForEachMacros:
- CTX_DATA_BEGIN_WITH_ID
- DEG_OBJECT_ITER_BEGIN
- DEG_OBJECT_ITER_FOR_RENDER_ENGINE_BEGIN
- DRW_ENABLED_ENGINE_ITER
- DRIVER_TARGETS_LOOPER_BEGIN
- DRIVER_TARGETS_USED_LOOPER_BEGIN
- FOREACH_BASE_IN_EDIT_MODE_BEGIN
@@ -205,7 +204,6 @@ ForEachMacros:
- FOREACH_SCENE_COLLECTION_BEGIN
- FOREACH_SCENE_OBJECT_BEGIN
- FOREACH_SELECTED_BASE_BEGIN
- FOREACH_SELECTED_BEZT_BEGIN
- FOREACH_SELECTED_EDITABLE_OBJECT_BEGIN
- FOREACH_SELECTED_OBJECT_BEGIN
- FOREACH_TRANS_DATA_CONTAINER
@@ -269,7 +267,3 @@ ForEachMacros:
StatementMacros:
- PyObject_HEAD
- PyObject_VAR_HEAD
- ccl_gpu_kernel_postfix
MacroBlockBegin: "^BSDF_CLOSURE_CLASS_BEGIN$"
MacroBlockEnd: "^BSDF_CLOSURE_CLASS_END$"

View File

@@ -12,8 +12,6 @@ Checks: >
-readability-avoid-const-params-in-decls,
-readability-simplify-boolean-expr,
-readability-make-member-function-const,
-readability-suspicious-call-argument,
-readability-redundant-member-init,
-readability-misleading-indentation,
@@ -27,8 +25,6 @@ Checks: >
-bugprone-branch-clone,
-bugprone-macro-parentheses,
-bugprone-reserved-identifier,
-bugprone-easily-swappable-parameters,
-bugprone-implicit-widening-of-multiplication-result,
-bugprone-sizeof-expression,
-bugprone-integer-division,
@@ -44,8 +40,7 @@ Checks: >
-modernize-pass-by-value,
# Cannot be enabled yet, because using raw string literals in tests breaks
# the windows compiler currently.
-modernize-raw-string-literal,
-modernize-return-braced-init-list
-modernize-raw-string-literal
CheckOptions:
- key: modernize-use-default-member-init.UseAssignment

View File

@@ -42,12 +42,3 @@ insert_final_newline = true
indent_style = space
indent_size = 3
max_line_length = 120
# Makefile
[{Makefile,GNUmakefile}]
charset = utf-8
trim_trailing_whitespace = true
insert_final_newline = true
indent_style = tab
indent_size = 4
max_line_length = 120

View File

@@ -1,5 +0,0 @@
This repository is only used as a mirror of git.blender.org. Blender development happens on
https://developer.blender.org.
To get started with contributing code, please see:
https://wiki.blender.org/wiki/Process/Contributing_Code

View File

@@ -1,5 +1,23 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Copyright 2006 Blender Foundation. All rights reserved.
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# The Original Code is Copyright (C) 2006, Blender Foundation
# All rights reserved.
#
# ***** END GPL LICENSE BLOCK *****
#-----------------------------------------------------------------------------
# We don't allow in-source builds. This causes no end of troubles because
@@ -12,7 +30,7 @@ if(${CMAKE_SOURCE_DIR} STREQUAL ${CMAKE_BINARY_DIR})
"CMake generation for blender is not allowed within the source directory!"
"\n Remove \"${CMAKE_SOURCE_DIR}/CMakeCache.txt\" and try again from another folder, e.g.:"
"\n "
"\n rm -rf CMakeCache.txt CMakeFiles"
"\n rm CMakeCache.txt"
"\n cd .."
"\n mkdir cmake-make"
"\n cd cmake-make"
@@ -138,16 +156,6 @@ get_blender_version()
option(WITH_BLENDER "Build blender (disable to build only the blender player)" ON)
mark_as_advanced(WITH_BLENDER)
if(APPLE)
# In future, can be used with `quicklookthumbnailing/qlthumbnailreply` to create file
# thumbnails for say Finder. Turn it off for now.
option(WITH_BLENDER_THUMBNAILER "Build \"blender-thumbnailer\" thumbnail extraction utility" OFF)
elseif(WIN32)
option(WITH_BLENDER_THUMBNAILER "Build \"BlendThumb.dll\" helper for Windows explorer integration" ON)
else()
option(WITH_BLENDER_THUMBNAILER "Build \"blender-thumbnailer\" thumbnail extraction utility" ON)
endif()
option(WITH_INTERNATIONAL "Enable I18N (International fonts and text)" ON)
option(WITH_PYTHON "Enable Embedded Python API (only disable for development)" ON)
@@ -170,13 +178,6 @@ mark_as_advanced(CPACK_OVERRIDE_PACKAGENAME)
mark_as_advanced(BUILDINFO_OVERRIDE_DATE)
mark_as_advanced(BUILDINFO_OVERRIDE_TIME)
if(${CMAKE_VERSION} VERSION_GREATER_EQUAL "3.16")
option(WITH_UNITY_BUILD "Enable unity build for modules that support it to improve compile times" ON)
mark_as_advanced(WITH_UNITY_BUILD)
else()
set(WITH_UNITY_BUILD OFF)
endif()
option(WITH_IK_ITASC "Enable ITASC IK solver (only disable for development & for incompatible C++ compilers)" ON)
option(WITH_IK_SOLVER "Enable Legacy IK solver (only disable for development)" ON)
option(WITH_FFTW3 "Enable FFTW3 support (Used for smoke, ocean sim, and audio effects)" ON)
@@ -257,12 +258,10 @@ endif()
if(UNIX AND NOT APPLE)
option(WITH_SYSTEM_GLEW "Use GLEW OpenGL wrapper library provided by the operating system" OFF)
option(WITH_SYSTEM_GLES "Use OpenGL ES library provided by the operating system" ON)
option(WITH_SYSTEM_FREETYPE "Use the freetype library provided by the operating system" OFF)
else()
# not an option for other OS's
set(WITH_SYSTEM_GLEW OFF)
set(WITH_SYSTEM_GLES OFF)
set(WITH_SYSTEM_FREETYPE OFF)
endif()
@@ -284,7 +283,6 @@ option(WITH_IMAGE_TIFF "Enable LibTIFF Support" ON)
option(WITH_IMAGE_DDS "Enable DDS Image Support" ON)
option(WITH_IMAGE_CINEON "Enable CINEON and DPX Image Support" ON)
option(WITH_IMAGE_HDR "Enable HDR Image Support" ON)
option(WITH_IMAGE_WEBP "Enable WebP Image Support" ON)
# Audio/Video format support
option(WITH_CODEC_AVI "Enable Blenders own AVI file support (raw/jpeg)" ON)
@@ -302,7 +300,7 @@ option(WITH_USD "Enable Universal Scene Description (USD) Suppor
option(WITH_OPENCOLLADA "Enable OpenCollada Support (http://www.opencollada.org)" ON)
# Sound output
option(WITH_SDL "Enable SDL for sound" ON)
option(WITH_SDL "Enable SDL for sound and joystick support" ON)
option(WITH_OPENAL "Enable OpenAL Support (http://www.openal.org)" ON)
if(APPLE)
option(WITH_COREAUDIO "Enable CoreAudio for audio support on macOS" ON)
@@ -390,71 +388,43 @@ if(WITH_PYTHON_INSTALL)
set(PYTHON_REQUESTS_PATH "" CACHE PATH "Path to python site-packages or dist-packages containing 'requests' module")
mark_as_advanced(PYTHON_REQUESTS_PATH)
endif()
option(WITH_PYTHON_INSTALL_ZSTANDARD "Copy zstandard into the blender install folder" ON)
set(PYTHON_ZSTANDARD_PATH "" CACHE PATH "Path to python site-packages or dist-packages containing 'zstandard' module")
mark_as_advanced(PYTHON_ZSTANDARD_PATH)
endif()
option(WITH_CPU_SIMD "Enable SIMD instruction if they're detected on the host machine" ON)
mark_as_advanced(WITH_CPU_SIMD)
# Cycles
option(WITH_CYCLES "Enable Cycles Render Engine" ON)
option(WITH_CYCLES_OSL "Build Cycles with OpenShadingLanguage support" ON)
option(WITH_CYCLES_EMBREE "Build Cycles with Embree support" ON)
option(WITH_CYCLES_LOGGING "Build Cycles with logging support" ON)
option(WITH_CYCLES_DEBUG "Build Cycles with options useful for debugging (e.g., MIS)" OFF)
option(WITH_CYCLES_STANDALONE "Build Cycles standalone application" OFF)
option(WITH_CYCLES_STANDALONE_GUI "Build Cycles standalone with GUI" OFF)
option(WITH_CYCLES_HYDRA_RENDER_DELEGATE "Build Cycles Hydra render delegate" OFF)
option(WITH_CYCLES_DEBUG_NAN "Build Cycles with additional asserts for detecting NaNs and invalid values" OFF)
option(WITH_CYCLES_NATIVE_ONLY "Build Cycles with native kernel only (which fits current CPU, use for development only)" OFF)
option(WITH_CYCLES_KERNEL_ASAN "Build Cycles kernels with address sanitizer when WITH_COMPILER_ASAN is on, even if it's very slow" OFF)
set(CYCLES_TEST_DEVICES CPU CACHE STRING "Run regression tests on the specified device types (CPU CUDA OPTIX HIP)" )
option(WITH_CYCLES "Enable Cycles Render Engine" ON)
option(WITH_CYCLES_STANDALONE "Build Cycles standalone application" OFF)
option(WITH_CYCLES_STANDALONE_GUI "Build Cycles standalone with GUI" OFF)
option(WITH_CYCLES_OSL "Build Cycles with OSL support" ON)
option(WITH_CYCLES_EMBREE "Build Cycles with Embree support" ON)
option(WITH_CYCLES_CUDA_BINARIES "Build Cycles CUDA binaries" OFF)
option(WITH_CYCLES_CUBIN_COMPILER "Build cubins with nvrtc based compiler instead of nvcc" OFF)
option(WITH_CYCLES_CUDA_BUILD_SERIAL "Build cubins one after another (useful on machines with limited RAM)" OFF)
mark_as_advanced(WITH_CYCLES_CUDA_BUILD_SERIAL)
set(CYCLES_TEST_DEVICES CPU CACHE STRING "Run regression tests on the specified device types (CPU CUDA OPTIX)" )
set(CYCLES_CUDA_BINARIES_ARCH sm_30 sm_35 sm_37 sm_50 sm_52 sm_60 sm_61 sm_70 sm_75 sm_86 compute_75 CACHE STRING "CUDA architectures to build binaries for")
mark_as_advanced(CYCLES_CUDA_BINARIES_ARCH)
unset(PLATFORM_DEFAULT)
option(WITH_CYCLES_LOGGING "Build Cycles with logging support" ON)
option(WITH_CYCLES_DEBUG_NAN "Build Cycles with additional asserts for detecting NaNs and invalid values" OFF)
option(WITH_CYCLES_NATIVE_ONLY "Build Cycles with native kernel only (which fits current CPU, use for development only)" OFF)
option(WITH_CYCLES_KERNEL_ASAN "Build Cycles kernels with address sanitizer when WITH_COMPILER_ASAN is on, even if it's very slow" OFF)
mark_as_advanced(WITH_CYCLES_KERNEL_ASAN)
mark_as_advanced(WITH_CYCLES_CUBIN_COMPILER)
mark_as_advanced(WITH_CYCLES_LOGGING)
mark_as_advanced(WITH_CYCLES_DEBUG_NAN)
mark_as_advanced(WITH_CYCLES_NATIVE_ONLY)
# NVIDIA CUDA & OptiX
if(NOT APPLE)
option(WITH_CYCLES_DEVICE_CUDA "Enable Cycles NVIDIA CUDA compute support" ON)
option(WITH_CYCLES_DEVICE_OPTIX "Enable Cycles NVIDIA OptiX support" ON)
mark_as_advanced(WITH_CYCLES_DEVICE_CUDA)
option(WITH_CYCLES_DEVICE_CUDA "Enable Cycles CUDA compute support" ON)
option(WITH_CYCLES_DEVICE_OPTIX "Enable Cycles OptiX support" ON)
option(WITH_CYCLES_DEVICE_HIP "Enable Cycles HIP support" OFF)
mark_as_advanced(WITH_CYCLES_DEVICE_HIP)
mark_as_advanced(WITH_CYCLES_DEVICE_CUDA)
option(WITH_CYCLES_CUDA_BINARIES "Build Cycles NVIDIA CUDA binaries" OFF)
set(CYCLES_CUDA_BINARIES_ARCH sm_30 sm_35 sm_37 sm_50 sm_52 sm_60 sm_61 sm_70 sm_75 sm_86 compute_75 CACHE STRING "CUDA architectures to build binaries for")
option(WITH_CYCLES_CUBIN_COMPILER "Build cubins with nvrtc based compiler instead of nvcc" OFF)
option(WITH_CYCLES_CUDA_BUILD_SERIAL "Build cubins one after another (useful on machines with limited RAM)" OFF)
option(WITH_CUDA_DYNLOAD "Dynamically load CUDA libraries at runtime (for developers, makes cuda-gdb work)" ON)
mark_as_advanced(CYCLES_CUDA_BINARIES_ARCH)
mark_as_advanced(WITH_CYCLES_CUBIN_COMPILER)
mark_as_advanced(WITH_CYCLES_CUDA_BUILD_SERIAL)
mark_as_advanced(WITH_CUDA_DYNLOAD)
endif()
# AMD HIP
if(NOT APPLE)
if(WIN32)
option(WITH_CYCLES_DEVICE_HIP "Enable Cycles AMD HIP support" ON)
else()
option(WITH_CYCLES_DEVICE_HIP "Enable Cycles AMD HIP support" OFF)
endif()
option(WITH_CYCLES_HIP_BINARIES "Build Cycles AMD HIP binaries" OFF)
set(CYCLES_HIP_BINARIES_ARCH gfx1010 gfx1011 gfx1012 gfx1030 gfx1031 gfx1032 gfx1034 CACHE STRING "AMD HIP architectures to build binaries for")
mark_as_advanced(WITH_CYCLES_DEVICE_HIP)
mark_as_advanced(CYCLES_HIP_BINARIES_ARCH)
endif()
# Apple Metal
if(APPLE)
option(WITH_CYCLES_DEVICE_METAL "Enable Cycles Apple Metal compute support" ON)
endif()
option(WITH_CUDA_DYNLOAD "Dynamically load CUDA libraries at runtime" ON)
mark_as_advanced(WITH_CUDA_DYNLOAD)
# Draw Manager
option(WITH_DRAW_DEBUG "Add extra debug capabilities to Draw Manager" OFF)
@@ -499,13 +469,14 @@ if(WIN32)
endif()
# This should be turned off when Blender enter beta/rc/release
if("${BLENDER_VERSION_CYCLE}" STREQUAL "alpha")
set(WITH_EXPERIMENTAL_FEATURES ON)
else()
if("${BLENDER_VERSION_CYCLE}" STREQUAL "release" OR
"${BLENDER_VERSION_CYCLE}" STREQUAL "rc")
set(WITH_EXPERIMENTAL_FEATURES OFF)
else()
set(WITH_EXPERIMENTAL_FEATURES ON)
endif()
# Unit testing
# Unit testsing
option(WITH_GTESTS "Enable GTest unit testing" OFF)
option(WITH_OPENGL_RENDER_TESTS "Enable OpenGL render related unit testing (Experimental)" OFF)
option(WITH_OPENGL_DRAW_TESTS "Enable OpenGL UI drawing related unit testing (Experimental)" OFF)
@@ -524,29 +495,14 @@ option(WITH_OPENGL "When off limits visibility of the opengl header
option(WITH_GLEW_ES "Switches to experimental copy of GLEW that has support for OpenGL ES. (temporary option for development purposes)" OFF)
option(WITH_GL_EGL "Use the EGL OpenGL system library instead of the platform specific OpenGL system library (CGL, glX, or WGL)" OFF)
option(WITH_GL_PROFILE_ES20 "Support using OpenGL ES 2.0. (through either EGL or the AGL/WGL/XGL 'es20' profile)" OFF)
option(WITH_GPU_SHADER_BUILDER "Shader builder is a developer option enabling linting on GLSL during compilation" OFF)
mark_as_advanced(
WITH_OPENGL
WITH_GLEW_ES
WITH_GL_EGL
WITH_GL_PROFILE_ES20
WITH_GPU_SHADER_BUILDER
)
# Metal
if (APPLE)
option(WITH_METAL_BACKEND "Use Metal for graphics instead of (or as well as) OpenGL on macOS." OFF)
mark_as_advanced(WITH_METAL_BACKEND)
else()
set(WITH_METAL_BACKEND OFF)
endif()
if (WITH_METAL_BACKEND)
set(CMAKE_OSX_DEPLOYMENT_TARGET "10.15" CACHE STRING "Minimum OS X deployment version" FORCE)
endif()
if(WIN32)
option(WITH_GL_ANGLE "Link with the ANGLE library, an OpenGL ES 2.0 implementation based on Direct3D, instead of the system OpenGL library." OFF)
mark_as_advanced(WITH_GL_ANGLE)
@@ -562,18 +518,12 @@ if(WIN32)
set(CPACK_INSTALL_PREFIX ${CMAKE_GENERIC_PROGRAM_FILES}/${})
endif()
# Compiler tool-chain.
if(UNIX AND NOT APPLE)
if(CMAKE_COMPILER_IS_GNUCC)
option(WITH_LINKER_GOLD "Use ld.gold linker which is usually faster than ld.bfd" ON)
mark_as_advanced(WITH_LINKER_GOLD)
option(WITH_LINKER_LLD "Use ld.lld linker which is usually faster than ld.gold" OFF)
mark_as_advanced(WITH_LINKER_LLD)
endif()
if(CMAKE_COMPILER_IS_GNUCC OR CMAKE_C_COMPILER_ID MATCHES "Clang")
option(WITH_LINKER_MOLD "Use ld.mold linker which is usually faster than ld.gold & ld.lld." OFF)
mark_as_advanced(WITH_LINKER_MOLD)
endif()
# Compiler toolchain
if(CMAKE_COMPILER_IS_GNUCC)
option(WITH_LINKER_GOLD "Use ld.gold linker which is usually faster than ld.bfd" ON)
mark_as_advanced(WITH_LINKER_GOLD)
option(WITH_LINKER_LLD "Use ld.lld linker which is usually faster than ld.gold" OFF)
mark_as_advanced(WITH_LINKER_LLD)
endif()
option(WITH_COMPILER_ASAN "Build and link against address sanitizer (only for Debug & RelWithDebInfo targets)." OFF)
@@ -672,7 +622,7 @@ if(WIN32)
option(WITH_WINDOWS_PDB "Generate a pdb file for client side stacktraces" ON)
mark_as_advanced(WITH_WINDOWS_PDB)
option(WITH_WINDOWS_STRIPPED_PDB "Use a stripped PDB file" ON)
option(WITH_WINDOWS_STRIPPED_PDB "Use a stripped PDB file" On)
mark_as_advanced(WITH_WINDOWS_STRIPPED_PDB)
endif()
@@ -684,7 +634,7 @@ if(WIN32 OR XCODE)
option(IDE_GROUP_PROJECTS_IN_FOLDERS "Organize the projects according to source folder structure." ON)
mark_as_advanced(IDE_GROUP_PROJECTS_IN_FOLDERS)
if(IDE_GROUP_PROJECTS_IN_FOLDERS)
if (IDE_GROUP_PROJECTS_IN_FOLDERS)
set_property(GLOBAL PROPERTY USE_FOLDERS ON)
endif()
endif()
@@ -709,12 +659,9 @@ if(UNIX AND NOT APPLE)
endif()
# Installation process.
set(POSTINSTALL_SCRIPT "" CACHE FILEPATH "Run given CMake script after installation process")
option(POSTINSTALL_SCRIPT "Run given CMake script after installation process" OFF)
mark_as_advanced(POSTINSTALL_SCRIPT)
set(POSTCONFIGURE_SCRIPT "" CACHE FILEPATH "Run given CMake script as the last step of CMake configuration")
mark_as_advanced(POSTCONFIGURE_SCRIPT)
# end option(...)
@@ -745,10 +692,9 @@ endif()
#-----------------------------------------------------------------------------
# Check for conflicting/unsupported configurations
if(NOT WITH_BLENDER AND NOT WITH_CYCLES_STANDALONE AND NOT WITH_CYCLES_HYDRA_RENDER_DELEGATE)
if(NOT WITH_BLENDER AND NOT WITH_CYCLES_STANDALONE)
message(FATAL_ERROR
"At least one of WITH_BLENDER or WITH_CYCLES_STANDALONE "
"or WITH_CYCLES_HYDRA_RENDER_DELEGATE "
"must be enabled, nothing to do!"
)
endif()
@@ -869,7 +815,7 @@ if(WITH_AUDASPACE)
endif()
# Auto-enable CUDA dynload if toolkit is not found.
if(WITH_CYCLES AND WITH_CYCLES_DEVICE_CUDA AND NOT WITH_CUDA_DYNLOAD)
if(NOT WITH_CUDA_DYNLOAD)
find_package(CUDA)
if(NOT CUDA_FOUND)
message(STATUS "CUDA toolkit not found, using dynamic runtime loading of libraries (WITH_CUDA_DYNLOAD) instead")
@@ -883,7 +829,7 @@ if(WITH_CYCLES_DEVICE_HIP)
endif()
#-----------------------------------------------------------------------------
# Check if submodules are cloned.
# Check check if submodules are cloned
if(WITH_INTERNATIONAL)
file(GLOB RESULT "${CMAKE_SOURCE_DIR}/release/datafiles/locale")
@@ -906,8 +852,8 @@ if(WITH_PYTHON)
# Do this before main 'platform_*' checks,
# because UNIX will search for the old Python paths which may not exist.
# giving errors about missing paths before this case is met.
if(DEFINED PYTHON_VERSION AND "${PYTHON_VERSION}" VERSION_LESS "3.10")
message(FATAL_ERROR "At least Python 3.10 is required to build, but found Python ${PYTHON_VERSION}")
if(DEFINED PYTHON_VERSION AND "${PYTHON_VERSION}" VERSION_LESS "3.9")
message(FATAL_ERROR "At least Python 3.9 is required to build, but found Python ${PYTHON_VERSION}")
endif()
file(GLOB RESULT "${CMAKE_SOURCE_DIR}/release/scripts/addons")
@@ -1099,7 +1045,7 @@ if(MSVC)
add_definitions(-D__LITTLE_ENDIAN__)
# OSX-Note: as we do cross-compiling with specific set architecture,
# endianness-detection and auto-setting is counterproductive
# endianess-detection and auto-setting is counterproductive
# so we just set endianness according CMAKE_OSX_ARCHITECTURES
elseif(CMAKE_OSX_ARCHITECTURES MATCHES i386 OR CMAKE_OSX_ARCHITECTURES MATCHES x86_64 OR CMAKE_OSX_ARCHITECTURES MATCHES arm64)
@@ -1291,16 +1237,6 @@ else()
list(APPEND GL_DEFINITIONS -DWITH_GL_PROFILE_CORE)
endif()
#-----------------------------------------------------------------------------
# Configure Metal.
if (WITH_METAL_BACKEND)
add_definitions(-DWITH_METAL_BACKEND)
# No need to add frameworks here, all the ones we need for Metal and
# Metal-OpenGL Interop are already being added by
# build_files/cmake/platform/platform_apple.cmake
endif()
#-----------------------------------------------------------------------------
# Configure OpenMP.
if(WITH_OPENMP)
@@ -1695,8 +1631,6 @@ elseif(CMAKE_C_COMPILER_ID MATCHES "Clang")
ADD_CHECK_C_COMPILER_FLAG(C_REMOVE_STRICT_FLAGS C_WARN_NO_DUPLICATE_ENUM -Wno-duplicate-enum)
ADD_CHECK_C_COMPILER_FLAG(C_REMOVE_STRICT_FLAGS C_WARN_NO_UNDEF -Wno-undef)
ADD_CHECK_C_COMPILER_FLAG(C_REMOVE_STRICT_FLAGS C_WARN_NO_MISSING_NORETURN -Wno-missing-noreturn)
ADD_CHECK_C_COMPILER_FLAG(C_REMOVE_STRICT_FLAGS C_WARN_NO_UNUSED_BUT_SET_VARIABLE -Wno-unused-but-set-variable)
ADD_CHECK_C_COMPILER_FLAG(C_REMOVE_STRICT_FLAGS C_WARN_NO_DEPRECATED_DECLARATIONS -Wno-deprecated-declarations)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_REMOVE_STRICT_FLAGS CXX_WARN_NO_UNUSED_PARAMETER -Wno-unused-parameter)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_REMOVE_STRICT_FLAGS CXX_WARN_NO_UNUSED_PRIVATE_FIELD -Wno-unused-private-field)
@@ -1789,19 +1723,13 @@ if(WITH_PYTHON)
elseif(WITH_PYTHON_INSTALL_REQUESTS)
find_python_package(requests "")
endif()
if(WIN32 OR APPLE)
# pass, we have this in lib/python/site-packages
elseif(WITH_PYTHON_INSTALL_ZSTANDARD)
find_python_package(zstandard "")
endif()
endif()
# Select C++17 as the standard for C++ projects.
set(CMAKE_CXX_STANDARD 17)
# If C++17 is not available, downgrading to an earlier standard is NOT OK.
set(CMAKE_CXX_STANDARD_REQUIRED ON)
# Do not enable compiler specific language extensions.
# Do not enable compiler specific language extentions.
set(CMAKE_CXX_EXTENSIONS OFF)
# Make MSVC properly report the value of the __cplusplus preprocessor macro
@@ -1911,13 +1839,15 @@ if(WITH_BLENDER)
# source after intern and extern to gather all
# internal and external library information first, for test linking
add_subdirectory(source)
elseif(WITH_CYCLES_STANDALONE OR WITH_CYCLES_HYDRA_RENDER_DELEGATE)
elseif(WITH_CYCLES_STANDALONE)
add_subdirectory(intern/glew-mx)
add_subdirectory(intern/guardedalloc)
add_subdirectory(intern/libc_compat)
add_subdirectory(intern/numaapi)
add_subdirectory(intern/sky)
add_subdirectory(intern/cycles)
add_subdirectory(extern/clew)
if(WITH_CYCLES_LOGGING)
if(NOT WITH_SYSTEM_GFLAGS)
add_subdirectory(extern/gflags)
@@ -1974,7 +1904,7 @@ if(FIRST_RUN)
set(_msg " - ${_setting}")
string(LENGTH "${_msg}" _len)
while("36" GREATER "${_len}")
while("32" GREATER "${_len}")
string(APPEND _msg " ")
math(EXPR _len "${_len} + 1")
endwhile()
@@ -2064,7 +1994,6 @@ if(FIRST_RUN)
endif()
info_cfg_option(WITH_PYTHON_INSTALL)
info_cfg_option(WITH_PYTHON_INSTALL_NUMPY)
info_cfg_option(WITH_PYTHON_INSTALL_ZSTANDARD)
info_cfg_option(WITH_PYTHON_MODULE)
info_cfg_option(WITH_PYTHON_SAFETY)
@@ -2089,8 +2018,3 @@ endif()
if(0)
print_all_vars()
endif()
# Should be the last step of configuration.
if(POSTCONFIGURE_SCRIPT)
include(${POSTCONFIGURE_SCRIPT})
endif()

View File

@@ -1,4 +1,23 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# -*- mode: gnumakefile; tab-width: 4; indent-tabs-mode: t; -*-
# vim: tabstop=4
#
# ##### BEGIN GPL LICENSE BLOCK #####
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ##### END GPL LICENSE BLOCK #####
# This Makefile does an out-of-source CMake build in ../build_`OS`_`CPU`
# eg:
@@ -8,7 +27,7 @@
define HELP_TEXT
Blender Convenience Targets
Provided for building Blender (multiple targets can be used at once).
Provided for building Blender, (multiple at once can be used).
* debug: Build a debug binary.
* full: Enable all supported dependencies & options.
@@ -21,8 +40,6 @@ Blender Convenience Targets
* ninja: Use ninja build tool for faster builds.
* ccache: Use ccache for faster rebuilds.
Note: when passing in multiple targets their order is not important.
So for a fast build you can for e.g. run 'make lite ccache ninja'.
Note: passing the argument 'BUILD_DIR=path' when calling make will override the default build dir.
Note: passing the argument 'BUILD_CMAKE_ARGS=args' lets you add cmake arguments.
@@ -32,7 +49,7 @@ Other Convenience Targets
* config: Run cmake configuration tool to set build options.
* deps: Build library dependencies (intended only for platform maintainers).
The existence of locally build dependencies overrides the pre-built dependencies from subversion.
The existance of locally build dependancies overrides the pre-built dependencies from subversion.
These must be manually removed from '../lib/' to go back to using the pre-compiled libraries.
Project Files
@@ -44,6 +61,8 @@ Project Files
Package Targets
* package_debian: Build a debian package.
* package_pacman: Build an arch linux pacman package.
* package_archive: Build an archive package.
Testing Targets
@@ -51,25 +70,24 @@ Testing Targets
* test:
Run automated tests with ctest.
* test_cmake:
Runs our own cmake file checker
which detects errors in the cmake file list definitions
* test_pep8:
Checks all python script are pep8
which are tagged to use the stricter formatting
* test_deprecated:
Checks for deprecation tags in our code which may need to be removed
Static Source Code Checking
Not associated with building Blender.
* check_cppcheck: Run blender source through cppcheck (C & C++).
* check_clang_array: Run blender source through clang array checking script (C & C++).
* check_deprecated: Check if there is any deprecated code to remove.
* check_splint: Run blenders source through splint (C only).
* check_sparse: Run blenders source through sparse (C only).
* check_smatch: Run blenders source through smatch (C only).
* check_descriptions: Check for duplicate/invalid descriptions.
* check_licenses: Check license headers follow the SPDX license specification,
using one of the accepted licenses in 'doc/license/SPDX-license-identifiers.txt'
Append with 'SHOW_HEADERS=1' to show all unique headers
which can be useful for spotting license irregularities.
* check_cmake: Runs our own cmake file checker which detects errors in the cmake file list definitions.
* check_pep8: Checks all Python script are pep8 which are tagged to use the stricter formatting.
* check_mypy: Checks all Python scripts using mypy,
see: source/tools/check_source/check_mypy_config.py scripts which are included.
Spell Checkers
This runs the spell checker from the developer tools repositor.
@@ -199,7 +217,7 @@ endif
# in libraries, or python 2 for running make update to get it.
ifeq ($(OS_NCASE),darwin)
ifeq (, $(shell command -v $(PYTHON)))
PYTHON:=$(DEPS_INSTALL_DIR)/python/bin/python3.10
PYTHON:=$(DEPS_INSTALL_DIR)/python/bin/python3.7m
ifeq (, $(shell command -v $(PYTHON)))
PYTHON:=python
endif
@@ -308,7 +326,7 @@ CMAKE_CONFIG = cmake $(CMAKE_CONFIG_ARGS) \
# -----------------------------------------------------------------------------
# Tool for 'make config'
# X11 specific.
# X11 spesific
ifdef DISPLAY
CMAKE_CONFIG_TOOL = cmake-gui
else
@@ -385,6 +403,11 @@ help: .FORCE
# -----------------------------------------------------------------------------
# Packages
#
package_debian: .FORCE
cd build_files/package_spec ; DEB_BUILD_OPTIONS="parallel=$(NPROCS)" sh ./build_debian.sh
package_pacman: .FORCE
cd build_files/package_spec/pacman ; MAKEFLAGS="-j$(NPROCS)" makepkg
package_archive: .FORCE
make -C "$(BUILD_DIR)" -s package_archive
@@ -395,7 +418,21 @@ package_archive: .FORCE
# Tests
#
test: .FORCE
@$(PYTHON) ./build_files/utils/make_test.py "$(BUILD_DIR)"
$(PYTHON) ./build_files/utils/make_test.py "$(BUILD_DIR)"
# run pep8 check check on scripts we distribute.
test_pep8: .FORCE
$(PYTHON) tests/python/pep8.py > test_pep8.log 2>&1
@echo "written: test_pep8.log"
# run some checks on our cmakefiles.
test_cmake: .FORCE
$(PYTHON) build_files/cmake/cmake_consistency_check.py > test_cmake_consistency.log 2>&1
@echo "written: test_cmake_consistency.log"
# run deprecation tests, see if we have anything to remove.
test_deprecated: .FORCE
$(PYTHON) tests/check_deprecated.py
# -----------------------------------------------------------------------------
@@ -417,44 +454,44 @@ project_eclipse: .FORCE
#
check_cppcheck: .FORCE
@$(CMAKE_CONFIG)
@cd "$(BUILD_DIR)" ; \
$(CMAKE_CONFIG)
cd "$(BUILD_DIR)" ; \
$(PYTHON) \
"$(BLENDER_DIR)/build_files/cmake/cmake_static_check_cppcheck.py" 2> \
"$(BLENDER_DIR)/check_cppcheck.txt"
@echo "written: check_cppcheck.txt"
check_clang_array: .FORCE
@$(CMAKE_CONFIG)
@cd "$(BUILD_DIR)" ; \
$(CMAKE_CONFIG)
cd "$(BUILD_DIR)" ; \
$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_clang_array.py"
check_splint: .FORCE
@$(CMAKE_CONFIG)
@cd "$(BUILD_DIR)" ; \
$(CMAKE_CONFIG)
cd "$(BUILD_DIR)" ; \
$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_splint.py"
check_sparse: .FORCE
@$(CMAKE_CONFIG)
@cd "$(BUILD_DIR)" ; \
$(CMAKE_CONFIG)
cd "$(BUILD_DIR)" ; \
$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_sparse.py"
check_smatch: .FORCE
@$(CMAKE_CONFIG)
@cd "$(BUILD_DIR)" ; \
$(CMAKE_CONFIG)
cd "$(BUILD_DIR)" ; \
$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_smatch.py"
check_mypy: .FORCE
@$(PYTHON) "$(BLENDER_DIR)/source/tools/check_source/check_mypy.py"
$(PYTHON) "$(BLENDER_DIR)/source/tools/check_source/check_mypy.py"
check_spelling_py: .FORCE
@cd "$(BUILD_DIR)" ; \
cd "$(BUILD_DIR)" ; \
PYTHONIOENCODING=utf_8 $(PYTHON) \
"$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
"$(BLENDER_DIR)/release/scripts"
check_spelling_c: .FORCE
@cd "$(BUILD_DIR)" ; \
cd "$(BUILD_DIR)" ; \
PYTHONIOENCODING=utf_8 $(PYTHON) \
"$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
--cache-file=$(CHECK_SPELLING_CACHE) \
@@ -464,70 +501,52 @@ check_spelling_c: .FORCE
"$(BLENDER_DIR)/intern/ghost" \
check_spelling_osl: .FORCE
@cd "$(BUILD_DIR)" ; \
cd "$(BUILD_DIR)" ;\
PYTHONIOENCODING=utf_8 $(PYTHON) \
"$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
--cache-file=$(CHECK_SPELLING_CACHE) \
"$(BLENDER_DIR)/intern/cycles/kernel/shaders"
check_descriptions: .FORCE
@$(BLENDER_BIN) --background -noaudio --factory-startup --python \
$(BLENDER_BIN) --background -noaudio --factory-startup --python \
"$(BLENDER_DIR)/source/tools/check_source/check_descriptions.py"
check_deprecated: .FORCE
@PYTHONIOENCODING=utf_8 $(PYTHON) \
source/tools/check_source/check_deprecated.py
check_licenses: .FORCE
@PYTHONIOENCODING=utf_8 $(PYTHON) \
"$(BLENDER_DIR)/source/tools/check_source/check_licenses.py" \
"--show-headers=$(SHOW_HEADERS)"
check_pep8: .FORCE
@PYTHONIOENCODING=utf_8 $(PYTHON) \
tests/python/pep8.py
check_cmake: .FORCE
@PYTHONIOENCODING=utf_8 $(PYTHON) \
source/tools/check_source/check_cmake_consistency.py
# -----------------------------------------------------------------------------
# Utilities
#
source_archive: .FORCE
@$(PYTHON) ./build_files/utils/make_source_archive.py
python3 ./build_files/utils/make_source_archive.py
source_archive_complete: .FORCE
@cmake \
cmake \
-S "$(BLENDER_DIR)/build_files/build_environment" -B"$(BUILD_DIR)/source_archive" \
-DCMAKE_BUILD_TYPE_INIT:STRING=$(BUILD_TYPE) -DPACKAGE_USE_UPSTREAM_SOURCES=OFF
# This assumes CMake is still using a default `PACKAGE_DIR` variable:
@$(PYTHON) ./build_files/utils/make_source_archive.py --include-packages "$(BUILD_DIR)/source_archive/packages"
python3 ./build_files/utils/make_source_archive.py --include-packages "$(BUILD_DIR)/source_archive/packages"
INKSCAPE_BIN?="inkscape"
icons: .FORCE
@BLENDER_BIN=$(BLENDER_BIN) INKSCAPE_BIN=$(INKSCAPE_BIN) \
BLENDER_BIN=$(BLENDER_BIN) INKSCAPE_BIN=$(INKSCAPE_BIN) \
"$(BLENDER_DIR)/release/datafiles/blender_icons_update.py"
@INKSCAPE_BIN=$(INKSCAPE_BIN) \
INKSCAPE_BIN=$(INKSCAPE_BIN) \
"$(BLENDER_DIR)/release/datafiles/prvicons_update.py"
@INKSCAPE_BIN=$(INKSCAPE_BIN) \
INKSCAPE_BIN=$(INKSCAPE_BIN) \
"$(BLENDER_DIR)/release/datafiles/alert_icons_update.py"
icons_geom: .FORCE
@BLENDER_BIN=$(BLENDER_BIN) \
BLENDER_BIN=$(BLENDER_BIN) \
"$(BLENDER_DIR)/release/datafiles/blender_icons_geom_update.py"
update: .FORCE
@$(PYTHON) ./build_files/utils/make_update.py
$(PYTHON) ./build_files/utils/make_update.py
update_code: .FORCE
@$(PYTHON) ./build_files/utils/make_update.py --no-libraries
$(PYTHON) ./build_files/utils/make_update.py --no-libraries
format: .FORCE
@PATH="../lib/${OS_NCASE}_${CPU}/llvm/bin/:../lib/${OS_NCASE}_centos7_${CPU}/llvm/bin/:../lib/${OS_NCASE}/llvm/bin/:$(PATH)" \
PATH="../lib/${OS_NCASE}_${CPU}/llvm/bin/:../lib/${OS_NCASE}_centos7_${CPU}/llvm/bin/:../lib/${OS_NCASE}/llvm/bin/:$(PATH)" \
$(PYTHON) source/tools/utils_maintenance/clang_format_paths.py $(PATHS)
@@ -537,25 +556,25 @@ format: .FORCE
# Simple version of ./doc/python_api/sphinx_doc_gen.sh with no PDF generation.
doc_py: .FORCE
@ASAN_OPTIONS=halt_on_error=0:${ASAN_OPTIONS} \
ASAN_OPTIONS=halt_on_error=0:${ASAN_OPTIONS} \
$(BLENDER_BIN) \
--background -noaudio --factory-startup \
--python doc/python_api/sphinx_doc_gen.py
@sphinx-build -b html -j $(NPROCS) doc/python_api/sphinx-in doc/python_api/sphinx-out
sphinx-build -b html -j $(NPROCS) doc/python_api/sphinx-in doc/python_api/sphinx-out
@echo "docs written into: '$(BLENDER_DIR)/doc/python_api/sphinx-out/index.html'"
doc_doxy: .FORCE
@cd doc/doxygen; doxygen Doxyfile
cd doc/doxygen; doxygen Doxyfile
@echo "docs written into: '$(BLENDER_DIR)/doc/doxygen/html/index.html'"
doc_dna: .FORCE
@$(BLENDER_BIN) \
$(BLENDER_BIN) \
--background -noaudio --factory-startup \
--python doc/blender_file_format/BlendFileDnaExporter_25.py
@echo "docs written into: '$(BLENDER_DIR)/doc/blender_file_format/dna.html'"
doc_man: .FORCE
@$(PYTHON) doc/manpage/blender.1.py --blender="$(BLENDER_BIN)" --output=blender.1 --verbose
$(PYTHON) doc/manpage/blender.1.py $(BLENDER_BIN) blender.1
help_features: .FORCE
@$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_print_build_options.py" $(BLENDER_DIR)"/CMakeLists.txt"

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
####################################################################################################
#
@@ -29,9 +45,8 @@ cmake_minimum_required(VERSION 3.5)
include(ExternalProject)
include(cmake/check_software.cmake)
include(cmake/versions.cmake)
include(cmake/options.cmake)
include(cmake/boost_build_options.cmake)
include(cmake/versions.cmake)
include(cmake/download.cmake)
if(ENABLE_MINGW64)
@@ -47,9 +62,7 @@ include(cmake/png.cmake)
include(cmake/jpeg.cmake)
include(cmake/blosc.cmake)
include(cmake/pthreads.cmake)
include(cmake/imath.cmake)
include(cmake/openexr.cmake)
include(cmake/brotli.cmake)
include(cmake/freetype.cmake)
include(cmake/freeglut.cmake)
include(cmake/glew.cmake)
@@ -77,6 +90,7 @@ endif()
include(cmake/osl.cmake)
include(cmake/tbb.cmake)
include(cmake/openvdb.cmake)
include(cmake/nanovdb.cmake)
include(cmake/python.cmake)
option(USE_PIP_NUMPY "Install NumPy using pip wheel instead of building from source" OFF)
if(APPLE AND ("${CMAKE_OSX_ARCHITECTURES}" STREQUAL "x86_64"))
@@ -95,15 +109,12 @@ include(cmake/pugixml.cmake)
include(cmake/ispc.cmake)
include(cmake/openimagedenoise.cmake)
include(cmake/embree.cmake)
include(cmake/fmt.cmake)
include(cmake/robinmap.cmake)
if(NOT APPLE)
include(cmake/xr_openxr.cmake)
endif()
# OpenColorIO and dependencies.
include(cmake/expat.cmake)
include(cmake/pystring.cmake)
include(cmake/yamlcpp.cmake)
include(cmake/opencolorio.cmake)
@@ -111,9 +122,8 @@ if(BLENDER_PLATFORM_ARM)
include(cmake/sse2neon.cmake)
endif()
include(cmake/webp.cmake)
if(NOT APPLE)
include(cmake/level-zero.cmake)
if(WITH_WEBP)
include(cmake/webp.cmake)
endif()
if(NOT WIN32 OR ENABLE_MINGW64)

View File

@@ -1,16 +1,46 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(ALEMBIC_EXTRA_ARGS
-DImath_ROOT=${LIBDIR}/imath
-DUSE_PYALEMBIC=OFF
-DUSE_ARNOLD=OFF
-DUSE_MAYA=OFF
-DUSE_PRMAN=OFF
-DUSE_HDF5=OFF
-DUSE_TESTS=OFF
-DBUILDSTATIC=ON
-DLINKSTATIC=ON
-DILMBASE_ROOT=${LIBDIR}/openexr
-DALEMBIC_ILMBASE_INCLUDE_DIRECTORY=${LIBDIR}/openexr/include/OpenEXR
-DALEMBIC_ILMBASE_HALF_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}Half${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DALEMBIC_ILMBASE_IMATH_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}Imath${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DALEMBIC_ILMBASE_ILMTHREAD_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmThread${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DALEMBIC_ILMBASE_IEX_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}Iex${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DALEMBIC_ILMBASE_IEXMATH_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}IexMath${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DUSE_PYILMBASE=0
-DUSE_PYALEMBIC=0
-DUSE_ARNOLD=0
-DUSE_MAYA=0
-DUSE_PRMAN=0
-DUSE_HDF5=Off
-DUSE_STATIC_HDF5=Off
-DUSE_TESTS=Off
-DALEMBIC_NO_OPENGL=1
-DUSE_BINARIES=ON
-DALEMBIC_ILMBASE_LINK_STATIC=OFF
-DALEMBIC_ILMBASE_LINK_STATIC=On
-DALEMBIC_SHARED_LIBS=OFF
-DGLUT_INCLUDE_DIR=""
-DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
)
ExternalProject_Add(external_alembic
@@ -41,5 +71,6 @@ endif()
add_dependencies(
external_alembic
external_zlib
external_openexr
)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(BLOSC_EXTRA_ARGS
-DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
@@ -24,6 +40,7 @@ ExternalProject_Add(external_blosc
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${BLOSC_HASH_TYPE}=${BLOSC_HASH}
PREFIX ${BUILD_DIR}/blosc
PATCH_COMMAND ${PATCH_CMD} --verbose -p 1 -N -d ${BUILD_DIR}/blosc/src/external_blosc < ${PATCH_DIR}/blosc.diff
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/blosc ${DEFAULT_CMAKE_FLAGS} ${BLOSC_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/blosc
)

View File

@@ -1,6 +1,33 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(BOOST_ADDRESS_MODEL 64)
if(BLENDER_PLATFORM_ARM)
set(BOOST_ARCHITECTURE arm)
else()
set(BOOST_ARCHITECTURE x86)
endif()
if(WIN32)
set(BOOST_TOOLSET toolset=msvc-14.1)
set(BOOST_COMPILER_STRING -vc141)
set(BOOST_CONFIGURE_COMMAND bootstrap.bat)
set(BOOST_BUILD_COMMAND b2)
set(BOOST_BUILD_OPTIONS runtime-link=shared )
@@ -20,6 +47,11 @@ else()
set(BOOST_BUILD_COMMAND ./b2)
set(BOOST_BUILD_OPTIONS cxxflags=${PLATFORM_CXXFLAGS} --disable-icu boost.locale.icu=off)
set(BOOST_PATCH_COMMAND echo .)
if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
set(BOOST_ADDRESS_MODEL 64)
else()
set(BOOST_ADDRESS_MODEL 32)
endif()
endif()
if(WITH_BOOST_PYTHON)

View File

@@ -1,30 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set(BOOST_ADDRESS_MODEL 64)
if(BLENDER_PLATFORM_ARM)
set(BOOST_ARCHITECTURE arm)
else()
set(BOOST_ARCHITECTURE x86)
endif()
if(WIN32)
if(MSVC_VERSION GREATER_EQUAL 1920) # 2019
set(BOOST_TOOLSET toolset=msvc-14.2)
set(BOOST_COMPILER_STRING -vc142)
else() # 2017
set(BOOST_TOOLSET toolset=msvc-14.1)
set(BOOST_COMPILER_STRING -vc141)
endif()
endif()
set(DEFAULT_BOOST_FLAGS
-DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-DBoost_USE_MULTITHREADED=ON
-DBoost_USE_STATIC_LIBS=ON
-DBoost_USE_STATIC_RUNTIME=OFF
-DBOOST_ROOT=${LIBDIR}/boost
-DBoost_NO_SYSTEM_PATHS=ON
-DBoost_NO_BOOST_CMAKE=ON
-DBoost_ADDITIONAL_VERSIONS=${BOOST_VERSION_SHORT}
-DBOOST_LIBRARYDIR=${LIBDIR}/boost/lib/
)

View File

@@ -1,22 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set(BROTLI_EXTRA_ARGS
)
ExternalProject_Add(external_brotli
URL file://${PACKAGE_DIR}/${BROTLI_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${BROTLI_HASH_TYPE}=${BROTLI_HASH}
PREFIX ${BUILD_DIR}/brotli
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/brotli ${DEFAULT_CMAKE_FLAGS} ${BROTLI_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/brotli
)
if(BUILD_MODE STREQUAL Release AND WIN32)
ExternalProject_Add_Step(external_brotli after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/brotli/include ${HARVEST_TARGET}/brotli/include
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/brotli/lib/brotlidec-static${LIBEXT} ${HARVEST_TARGET}/brotli/lib/brotlidec-static${LIBEXT}
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/brotli/lib/brotlicommon-static${LIBEXT} ${HARVEST_TARGET}/brotli/lib/brotlicommon-static${LIBEXT}
DEPENDEES install
)
endif()

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(BZIP2_PREFIX "${LIBDIR}/bzip2")
set(BZIP2_CONFIGURE_ENV echo .)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(UNIX)
if(APPLE)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(CLEW_EXTRA_ARGS)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(CUEW_EXTRA_ARGS)

View File

@@ -1,16 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-or-later
## Update and uncomment this in the release branch
# set(BLENDER_VERSION 3.1)
function(download_source dep)
set(TARGET_FILE ${${dep}_FILE})
set(TARGET_HASH_TYPE ${${dep}_HASH_TYPE})
set(TARGET_HASH ${${dep}_HASH})
if(PACKAGE_USE_UPSTREAM_SOURCES)
set(TARGET_URI ${${dep}_URI})
elseif(BLENDER_VERSION)
set(TARGET_URI https://svn.blender.org/svnroot/bf-blender/tags/blender-${BLENDER_VERSION}-release/lib/packages/${TARGET_FILE})
else()
set(TARGET_URI https://svn.blender.org/svnroot/bf-blender/trunk/lib/packages/${TARGET_FILE})
endif()
@@ -71,7 +64,9 @@ download_source(FFMPEG)
download_source(FFTW)
download_source(ICONV)
download_source(SNDFILE)
download_source(WEBP)
if(WITH_WEBP)
download_source(WEBP)
endif()
download_source(SPNAV)
download_source(JEMALLOC)
download_source(XML2)
@@ -99,9 +94,3 @@ download_source(POTRACE)
download_source(HARU)
download_source(ZSTD)
download_source(FLEX)
download_source(BROTLI)
download_source(FMT)
download_source(ROBINMAP)
download_source(IMATH)
download_source(PYSTRING)
download_source(LEVEL_ZERO)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
# Note the utility apps may use png/tiff/gif system libraries, but the
# library itself does not depend on them, so should give no problems.
@@ -17,16 +33,6 @@ set(EMBREE_EXTRA_ARGS
-DTBB_STATIC_LIB=${TBB_STATIC_LIBRARY}
)
if(BLENDER_PLATFORM_ARM)
set(EMBREE_EXTRA_ARGS
${EMBREE_EXTRA_ARGS}
-DEMBREE_MAX_ISA=NEON)
else()
set(EMBREE_EXTRA_ARGS
${EMBREE_EXTRA_ARGS}
-DEMBREE_MAX_ISA=AVX2)
endif()
if(TBB_STATIC_LIBRARY)
set(EMBREE_EXTRA_ARGS
${EMBREE_EXTRA_ARGS}
@@ -47,15 +53,26 @@ else()
set(EMBREE_BUILD_DIR)
endif()
ExternalProject_Add(external_embree
URL file://${PACKAGE_DIR}/${EMBREE_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${EMBREE_HASH_TYPE}=${EMBREE_HASH}
PREFIX ${BUILD_DIR}/embree
PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/embree/src/external_embree < ${PATCH_DIR}/embree.diff
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/embree ${DEFAULT_CMAKE_FLAGS} ${EMBREE_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/embree
)
if(BLENDER_PLATFORM_ARM)
ExternalProject_Add(external_embree
GIT_REPOSITORY ${EMBREE_ARM_GIT}
GIT_TAG "blender-arm"
DOWNLOAD_DIR ${DOWNLOAD_DIR}
PREFIX ${BUILD_DIR}/embree
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/embree ${DEFAULT_CMAKE_FLAGS} ${EMBREE_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/embree
)
else()
ExternalProject_Add(external_embree
URL file://${PACKAGE_DIR}/${EMBREE_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${EMBREE_HASH_TYPE}=${EMBREE_HASH}
PREFIX ${BUILD_DIR}/embree
PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/embree/src/external_embree < ${PATCH_DIR}/embree.diff
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/embree ${DEFAULT_CMAKE_FLAGS} ${EMBREE_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/embree
)
endif()
add_dependencies(
external_embree

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(EXPAT_EXTRA_ARGS
-DEXPAT_BUILD_DOCS=OFF

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_ffi
URL file://${PACKAGE_DIR}/${FFI_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(FFMPEG_CFLAGS "-I${mingw_LIBDIR}/lame/include -I${mingw_LIBDIR}/openjpeg/include/ -I${mingw_LIBDIR}/ogg/include -I${mingw_LIBDIR}/vorbis/include -I${mingw_LIBDIR}/theora/include -I${mingw_LIBDIR}/opus/include -I${mingw_LIBDIR}/vpx/include -I${mingw_LIBDIR}/x264/include -I${mingw_LIBDIR}/xvidcore/include -I${mingw_LIBDIR}/zlib/include")
set(FFMPEG_LDFLAGS "-L${mingw_LIBDIR}/lame/lib -L${mingw_LIBDIR}/openjpeg/lib -L${mingw_LIBDIR}/ogg/lib -L${mingw_LIBDIR}/vorbis/lib -L${mingw_LIBDIR}/theora/lib -L${mingw_LIBDIR}/opus/lib -L${mingw_LIBDIR}/vpx/lib -L${mingw_LIBDIR}/x264/lib -L${mingw_LIBDIR}/xvidcore/lib -L${mingw_LIBDIR}/zlib/lib")

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(FFTW_EXTRA_ARGS)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_flac
URL file://${PACKAGE_DIR}/${FLAC_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_flex
URL file://${PACKAGE_DIR}/${FLEX_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(FLEXBISON_EXTRA_ARGS)

View File

@@ -1,14 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set(FMT_EXTRA_ARGS
-DFMT_TEST=Off
)
ExternalProject_Add(external_fmt
URL file://${PACKAGE_DIR}/${FMT_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${FMT_HASH_TYPE}=${FMT_HASH}
PREFIX ${BUILD_DIR}/fmt
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/fmt ${DEFAULT_CMAKE_FLAGS} ${FMT_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/fmt
)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
if(BUILD_MODE STREQUAL Release)

View File

@@ -1,15 +1,31 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(FREETYPE_EXTRA_ARGS
-DCMAKE_RELEASE_POSTFIX:STRING=2ST
-DCMAKE_DEBUG_POSTFIX:STRING=2ST_d
-DFT_DISABLE_BZIP2=ON
-DFT_DISABLE_HARFBUZZ=ON
-DFT_DISABLE_PNG=ON
-DFT_REQUIRE_BROTLI=ON
-DPC_BROTLIDEC_INCLUDEDIR=${LIBDIR}/brotli/include
-DPC_BROTLIDEC_LIBDIR=${LIBDIR}/brotli/lib
)
-DWITH_BZip2=OFF
-DWITH_HarfBuzz=OFF
-DFT_WITH_HARFBUZZ=OFF
-DFT_WITH_BZIP2=OFF
-DCMAKE_DISABLE_FIND_PACKAGE_HarfBuzz=TRUE
-DCMAKE_DISABLE_FIND_PACKAGE_BZip2=TRUE
-DCMAKE_DISABLE_FIND_PACKAGE_BrotliDec=TRUE)
ExternalProject_Add(external_freetype
URL file://${PACKAGE_DIR}/${FREETYPE_FILE}
@@ -20,11 +36,6 @@ ExternalProject_Add(external_freetype
INSTALL_DIR ${LIBDIR}/freetype
)
add_dependencies(
external_freetype
external_brotli
)
if(BUILD_MODE STREQUAL Release AND WIN32)
ExternalProject_Add_Step(external_freetype after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/freetype ${HARVEST_TARGET}/freetype

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(GLEW_EXTRA_ARGS
-DBUILD_UTILS=Off

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(GLFW_EXTRA_ARGS)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(GMP_EXTRA_ARGS -enable-cxx)
@@ -22,6 +38,13 @@ elseif(UNIX AND NOT APPLE)
)
endif()
if(BLENDER_PLATFORM_ARM)
set(GMP_OPTIONS
${GMP_OPTIONS}
--disable-assembly
)
endif()
ExternalProject_Add(external_gmp
URL file://${PACKAGE_DIR}/${GMP_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(HARU_EXTRA_ARGS
-DLIBHPDF_SHARED=OFF

View File

@@ -1,7 +1,23 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
########################################################################
# Copy all generated files to the proper structure as blender prefers
# Copy all generated files to the proper strucure as blender prefers
########################################################################
if(NOT DEFINED HARVEST_TARGET)
@@ -14,8 +30,8 @@ if(WIN32)
if(BUILD_MODE STREQUAL Release)
add_custom_target(Harvest_Release_Results
COMMAND # jpeg rename libfile + copy include
${CMAKE_COMMAND} -E copy ${LIBDIR}/jpeg/lib/jpeg-static.lib ${HARVEST_TARGET}/jpeg/lib/libjpeg.lib &&
${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/jpeg/include/ ${HARVEST_TARGET}/jpeg/include/ &&
${CMAKE_COMMAND} -E copy ${LIBDIR}/jpg/lib/jpeg-static.lib ${HARVEST_TARGET}/jpeg/lib/libjpeg.lib &&
${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/jpg/include/ ${HARVEST_TARGET}/jpeg/include/ &&
# png
${CMAKE_COMMAND} -E copy ${LIBDIR}/png/lib/libpng16_static.lib ${HARVEST_TARGET}/png/lib/libpng.lib &&
${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/png/include/ ${HARVEST_TARGET}/png/include/ &&
@@ -63,12 +79,8 @@ endfunction()
harvest(alembic/include alembic/include "*.h")
harvest(alembic/lib/libAlembic.a alembic/lib/libAlembic.a)
harvest(alembic/bin alembic/bin "*")
harvest(brotli/include brotli/include "*.h")
harvest(brotli/lib brotli/lib "*.a")
harvest(boost/include boost/include "*")
harvest(boost/lib boost/lib "*.a")
harvest(imath/include imath/include "*.h")
harvest(imath/lib imath/lib "*.a")
harvest(ffmpeg/include ffmpeg/include "*.h")
harvest(ffmpeg/lib ffmpeg/lib "*.a")
harvest(fftw3/include fftw3/include "*.h")
@@ -82,13 +94,9 @@ harvest(gmp/include gmp/include "*.h")
harvest(gmp/lib gmp/lib "*.a")
harvest(jemalloc/include jemalloc/include "*.h")
harvest(jemalloc/lib jemalloc/lib "*.a")
harvest(jpeg/include jpeg/include "*.h")
harvest(jpeg/lib jpeg/lib "libjpeg.a")
harvest(jpg/include jpeg/include "*.h")
harvest(jpg/lib jpeg/lib "libjpeg.a")
harvest(lame/lib ffmpeg/lib "*.a")
if(NOT APPLE)
harvest(level-zero/include/level_zero level-zero/include/level_zero "*.h")
harvest(level-zero/lib level-zero/lib "*.a")
endif()
harvest(llvm/bin llvm/bin "clang-format")
if(BUILD_CLANG_TOOLS)
harvest(llvm/bin llvm/bin "clang-tidy")
@@ -141,7 +149,7 @@ harvest(openimagedenoise/include openimagedenoise/include "*")
harvest(openimagedenoise/lib openimagedenoise/lib "*.a")
harvest(embree/include embree/include "*.h")
harvest(embree/lib embree/lib "*.a")
harvest(openjpeg/include/openjpeg-${OPENJPEG_SHORT_VERSION} openjpeg/include "*.h")
harvest(openjpeg/include/openjpeg-2.3 openjpeg/include "*.h")
harvest(openjpeg/lib openjpeg/lib "*.a")
harvest(opensubdiv/include opensubdiv/include "*.h")
harvest(opensubdiv/lib opensubdiv/lib "*.a")
@@ -175,10 +183,9 @@ harvest(tiff/lib tiff/lib "*.a")
harvest(vorbis/lib ffmpeg/lib "*.a")
harvest(opus/lib ffmpeg/lib "*.a")
harvest(vpx/lib ffmpeg/lib "*.a")
harvest(webp/lib ffmpeg/lib "*.a")
harvest(x264/lib ffmpeg/lib "*.a")
harvest(xvidcore/lib ffmpeg/lib "*.a")
harvest(webp/lib webp/lib "*.a")
harvest(webp/include webp/include "*.h")
harvest(usd/include usd/include "*.h")
harvest(usd/lib/usd usd/lib/usd "*")
harvest(usd/plugin usd/plugin "*")

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(ICONV_EXTRA_ARGS)

View File

@@ -1,24 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set(IMATH_EXTRA_ARGS
-DBUILD_SHARED_LIBS=OFF
-DBUILD_TESTING=OFF
-DIMATH_LIB_SUFFIX=${OPENEXR_VERSION_BUILD_POSTFIX}
)
ExternalProject_Add(external_imath
URL file://${PACKAGE_DIR}/${IMATH_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${IMATH_HASH_TYPE}=${IMATH_HASH}
PREFIX ${BUILD_DIR}/imath
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/imath ${DEFAULT_CMAKE_FLAGS} ${IMATH_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/imath
)
if(WIN32)
ExternalProject_Add_Step(external_imath after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/imath/lib ${HARVEST_TARGET}/imath/lib
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/imath/include ${HARVEST_TARGET}/imath/include
DEPENDEES install
)
endif()

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
set(ISPC_EXTRA_ARGS_WIN

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_jemalloc
URL file://${PACKAGE_DIR}/${JEMALLOC_FILE}

View File

@@ -1,53 +1,61 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
# cmake for windows
set(JPEG_EXTRA_ARGS
-DNASM=${NASM_PATH}
-DWITH_JPEG8=ON
-DCMAKE_DEBUG_POSTFIX=d
-DWITH_CRT_DLL=On
-DENABLE_SHARED=OFF
-DENABLE_STATIC=ON
)
set(JPEG_EXTRA_ARGS -DNASM=${NASM_PATH} -DWITH_JPEG8=ON -DCMAKE_DEBUG_POSTFIX=d -DWITH_CRT_DLL=On)
ExternalProject_Add(external_jpeg
URL file://${PACKAGE_DIR}/${JPEG_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${JPEG_HASH_TYPE}=${JPEG_HASH}
PREFIX ${BUILD_DIR}/jpeg
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/jpeg ${DEFAULT_CMAKE_FLAGS} ${JPEG_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/jpeg
PREFIX ${BUILD_DIR}/jpg
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/jpg ${DEFAULT_CMAKE_FLAGS} ${JPEG_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/jpg
)
if(BUILD_MODE STREQUAL Debug)
ExternalProject_Add_Step(external_jpeg after_install
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/jpg/lib/jpegd${LIBEXT} ${LIBDIR}/jpg/lib/jpeg${LIBEXT}
DEPENDEES install
)
endif()
if(BUILD_MODE STREQUAL Release)
set(JPEG_LIBRARY jpeg-static${LIBEXT})
else()
set(JPEG_LIBRARY jpeg-staticd${LIBEXT})
endif()
if(BUILD_MODE STREQUAL Release)
ExternalProject_Add_Step(external_jpeg after_install
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/jpeg/lib/${JPEG_LIBRARY} ${LIBDIR}/jpeg/lib/jpeg${LIBEXT}
DEPENDEES install
)
endif()
else(WIN32)
# cmake for unix
set(JPEG_EXTRA_ARGS
-DWITH_JPEG8=ON
-DENABLE_STATIC=ON
-DENABLE_SHARED=OFF
-DCMAKE_INSTALL_LIBDIR=${LIBDIR}/jpeg/lib)
-DCMAKE_INSTALL_LIBDIR=${LIBDIR}/jpg/lib)
ExternalProject_Add(external_jpeg
URL file://${PACKAGE_DIR}/${JPEG_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${JPEG_HASH_TYPE}=${JPEG_HASH}
PREFIX ${BUILD_DIR}/jpeg
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/jpeg ${DEFAULT_CMAKE_FLAGS} ${JPEG_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/jpeg
PREFIX ${BUILD_DIR}/jpg
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/jpg ${DEFAULT_CMAKE_FLAGS} ${JPEG_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/jpg
)
set(JPEG_LIBRARY libjpeg${LIBEXT})

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(LAME_EXTRA_ARGS)
if(MSVC)

View File

@@ -1,21 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set(LEVEL_ZERO_EXTRA_ARGS
)
ExternalProject_Add(external_level-zero
URL file://${PACKAGE_DIR}/${LEVEL_ZERO_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${LEVEL_ZERO_HASH_TYPE}=${LEVEL_ZERO_HASH}
PREFIX ${BUILD_DIR}/level-zero
PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/level-zero/src/external_level-zero < ${PATCH_DIR}/level-zero.diff
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/level-zero ${DEFAULT_CMAKE_FLAGS} ${LEVEL_ZERO_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/level-zero
)
if(BUILD_MODE STREQUAL Release AND WIN32)
ExternalProject_Add_Step(external_level-zero after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/level-zero ${HARVEST_TARGET}/level-zero
DEPENDEES install
)
endif()

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(LIBGLU_CFLAGS "-static-libgcc")
set(LIBGLU_CXXFLAGS "-static-libgcc -static-libstdc++ -Bstatic -lstdc++ -Bdynamic -l:libstdc++.a")

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(BLENDER_PLATFORM_ARM)
set(LLVM_TARGETS AArch64$<SEMICOLON>ARM)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(LZMA_PATCH_CMD echo .)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(MESA_CFLAGS "-static-libgcc")
set(MESA_CXXFLAGS "-static-libgcc -static-libstdc++ -Bstatic -lstdc++ -Bdynamic -l:libstdc++.a")

View File

@@ -0,0 +1,54 @@
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(NANOVDB_EXTRA_ARGS
# NanoVDB is header-only, so only need the install target
-DNANOVDB_BUILD_UNITTESTS=OFF
-DNANOVDB_BUILD_EXAMPLES=OFF
-DNANOVDB_BUILD_BENCHMARK=OFF
-DNANOVDB_BUILD_DOCS=OFF
-DNANOVDB_BUILD_TOOLS=OFF
-DNANOVDB_CUDA_KEEP_PTX=OFF
# Do not need to include any of the dependencies because of this
-DNANOVDB_USE_OPENVDB=OFF
-DNANOVDB_USE_OPENGL=OFF
-DNANOVDB_USE_OPENCL=OFF
-DNANOVDB_USE_CUDA=OFF
-DNANOVDB_USE_TBB=OFF
-DNANOVDB_USE_BLOSC=OFF
-DNANOVDB_USE_ZLIB=OFF
-DNANOVDB_USE_OPTIX=OFF
-DNANOVDB_ALLOW_FETCHCONTENT=OFF
)
ExternalProject_Add(nanovdb
URL file://${PACKAGE_DIR}/${NANOVDB_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${NANOVDB_HASH_TYPE}=${NANOVDB_HASH}
PREFIX ${BUILD_DIR}/nanovdb
SOURCE_SUBDIR nanovdb
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/nanovdb ${DEFAULT_CMAKE_FLAGS} ${NANOVDB_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/nanovdb
)
if(WIN32)
ExternalProject_Add_Step(nanovdb after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/nanovdb/nanovdb ${HARVEST_TARGET}/nanovdb/include/nanovdb
DEPENDEES install
)
endif()

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_nasm
URL file://${PACKAGE_DIR}/${NASM_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(MSVC)
message("BIN >${PYTHON_BINARY}<")
@@ -22,6 +38,7 @@ ExternalProject_Add(external_numpy
PREFIX ${BUILD_DIR}/numpy
PATCH_COMMAND ${NUMPY_PATCH}
CONFIGURE_COMMAND ""
PATCH_COMMAND COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/numpy/src/external_numpy < ${PATCH_DIR}/numpy.diff
LOG_BUILD 1
BUILD_COMMAND ${PYTHON_BINARY} ${BUILD_DIR}/numpy/src/external_numpy/setup.py build ${NUMPY_BUILD_OPTION} install --old-and-unmanageable
INSTALL_COMMAND ""

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_ogg
URL file://${PACKAGE_DIR}/${OGG_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(BUILD_MODE STREQUAL Release)
set(OPENAL_EXTRA_ARGS

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(UNIX)
set(OPENCOLLADA_EXTRA_ARGS

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(OPENCOLORIO_EXTRA_ARGS
-DOCIO_BUILD_APPS=OFF
@@ -11,12 +27,13 @@ set(OPENCOLORIO_EXTRA_ARGS
-DOCIO_BUILD_GPU_TESTS=OFF
-DOCIO_USE_SSE=ON
-DOCIO_INSTALL_EXT_PACKAGES=NONE
# Manually build ext packages except for pystring, which does not have
# a CMake or autotools build system that we can easily use.
-DOCIO_INSTALL_EXT_PACKAGES=MISSING
-DHalf_ROOT=${LIBDIR}/openexr
-DHalf_STATIC_LIBRARY=ON
-Dexpat_ROOT=${LIBDIR}/expat
-Dyaml-cpp_ROOT=${LIBDIR}/yamlcpp
-Dpystring_ROOT=${LIBDIR}/pystring
-DImath_ROOT=${LIBDIR}/imath
)
if(BLENDER_PLATFORM_ARM)
@@ -29,9 +46,7 @@ endif()
if(WIN32)
set(OPENCOLORIO_EXTRA_ARGS
${OPENCOLORIO_EXTRA_ARGS}
-Dexpat_LIBRARY=${LIBDIR}/expat/lib/libexpatMD
-Dyaml-cpp_LIBRARY=${LIBDIR}/expat/lib/libyaml-cppmd.lib
-DImath_LIBRARY=${LIBDIR}/imath/lib/imath${OPENEXR_VERSION_POSTFIX}
-DOCIO_INLINES_HIDDEN=OFF
)
else()
set(OPENCOLORIO_EXTRA_ARGS
@@ -63,7 +78,7 @@ if(WIN32)
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opencolorio/lib ${HARVEST_TARGET}/opencolorio/lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/yamlcpp/lib/libyaml-cppmd.lib ${HARVEST_TARGET}/opencolorio/lib/libyaml-cpp.lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/expat/lib/libexpatMD.lib ${HARVEST_TARGET}/opencolorio/lib/libexpatMD.lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/pystring/lib/pystring.lib ${HARVEST_TARGET}/opencolorio/lib/pystring.lib
COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/opencolorio/src/external_opencolorio-build/ext/dist/lib/pystring.lib ${HARVEST_TARGET}/opencolorio/lib/pystring.lib
DEPENDEES install
)
endif()
@@ -72,7 +87,7 @@ if(WIN32)
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencolorio/lib/Opencolorio.lib ${HARVEST_TARGET}/opencolorio/lib/OpencolorIO_d.lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/yamlcpp/lib/libyaml-cppmdd.lib ${HARVEST_TARGET}/opencolorio/lib/libyaml-cpp_d.lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/expat/lib/libexpatdMD.lib ${HARVEST_TARGET}/opencolorio/lib/libexpatdMD.lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/pystring/lib/pystring.lib ${HARVEST_TARGET}/opencolorio/lib/pystring_d.lib
COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/opencolorio/src/external_opencolorio-build/ext/dist/lib/pystring.lib ${HARVEST_TARGET}/opencolorio/lib/pystring_d.lib
DEPENDEES install
)
endif()
@@ -80,7 +95,7 @@ else()
ExternalProject_Add_Step(external_opencolorio after_install
COMMAND cp ${LIBDIR}/yamlcpp/lib/libyaml-cpp.a ${LIBDIR}/opencolorio/lib/
COMMAND cp ${LIBDIR}/expat/lib/libexpat.a ${LIBDIR}/opencolorio/lib/
COMMAND cp ${LIBDIR}/pystring/lib/libpystring.a ${LIBDIR}/opencolorio/lib/
COMMAND cp ${BUILD_DIR}/opencolorio/src/external_opencolorio-build/ext/dist/lib/libpystring.a ${LIBDIR}/opencolorio/lib/
DEPENDEES install
)
endif()

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
set(OPENEXR_CMAKE_CXX_STANDARD_LIBRARIES "kernel32${LIBEXT} user32${LIBEXT} gdi32${LIBEXT} winspool${LIBEXT} shell32${LIBEXT} ole32${LIBEXT} oleaut32${LIBEXT} uuid${LIBEXT} comdlg32${LIBEXT} advapi32${LIBEXT} psapi${LIBEXT}")
@@ -16,10 +32,12 @@ set(OPENEXR_EXTRA_ARGS
-DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-DBUILD_TESTING=OFF
-DOPENEXR_BUILD_BOTH_STATIC_SHARED=OFF
-DILMBASE_BUILD_BOTH_STATIC_SHARED=OFF
-DBUILD_SHARED_LIBS=OFF
-DOPENEXR_INSTALL_TOOLS=OFF
-DOPENEXR_INSTALL_EXAMPLES=OFF
-DImath_DIR=${LIBDIR}/imath/lib/cmake/Imath
-DOPENEXR_BUILD_UTILS=OFF
-DPYILMBASE_ENABLE=OFF
-DOPENEXR_VIEWERS_ENABLE=OFF
-DILMBASE_LIB_SUFFIX=${OPENEXR_VERSION_BUILD_POSTFIX}
-DOPENEXR_LIB_SUFFIX=${OPENEXR_VERSION_BUILD_POSTFIX}
)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(OIDN_EXTRA_ARGS
@@ -8,7 +24,6 @@ set(OIDN_EXTRA_ARGS
-DOIDN_STATIC_LIB=ON
-DOIDN_STATIC_RUNTIME=OFF
-DISPC_EXECUTABLE=${LIBDIR}/ispc/bin/ispc
-DOIDN_FILTER_RTLIGHTMAP=OFF
)
if(WIN32)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(BUILD_MODE STREQUAL Release)
set(OIIO_TOOLS ON)
@@ -23,20 +39,35 @@ else()
set(OIIO_SIMD_FLAGS)
endif()
if(WITH_WEBP)
set(WEBP_ARGS
-DWEBP_INCLUDE_DIR=${LIBDIR}/webp/include
-DWEBP_LIBRARY=${LIBDIR}/webp/lib/${LIBPREFIX}webp${LIBEXT}
)
set(WEBP_DEP external_webp)
endif()
if(MSVC)
set(OPENJPEG_FLAGS
-DOpenJPEG_ROOT=${LIBDIR}/openjpeg_msvc
-DOpenJpeg_ROOT=${LIBDIR}/openjpeg_msvc
)
else()
set(OPENJPEG_FLAGS
-DOpenJPEG_ROOT=${LIBDIR}/openjpeg
-DOpenJpeg_ROOT=${LIBDIR}/openjpeg
)
endif()
set(OPENIMAGEIO_EXTRA_ARGS
-DBUILD_SHARED_LIBS=OFF
${OPENIMAGEIO_LINKSTATIC}
${DEFAULT_BOOST_FLAGS}
-DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-DBoost_USE_MULTITHREADED=ON
-DBoost_USE_STATIC_LIBS=ON
-DBoost_USE_STATIC_RUNTIME=OFF
-DBOOST_ROOT=${LIBDIR}/boost
-DBOOST_LIBRARYDIR=${LIBDIR}/boost/lib/
-DBoost_NO_SYSTEM_PATHS=ON
-DBoost_NO_BOOST_CMAKE=ON
-DUSE_LIBSQUISH=OFF
-DUSE_QT5=OFF
-DUSE_NUKE=OFF
@@ -47,6 +78,7 @@ set(OPENIMAGEIO_EXTRA_ARGS
-DUSE_LIBHEIF=OFF
-DUSE_OPENGL=OFF
-DUSE_TBB=OFF
-DUSE_FIELD3D=OFF
-DUSE_QT=OFF
-DUSE_PYTHON=OFF
-DUSE_GIF=OFF
@@ -57,7 +89,7 @@ set(OPENIMAGEIO_EXTRA_ARGS
-DUSE_FREETYPE=OFF
-DUSE_LIBRAW=OFF
-DUSE_OPENCOLORIO=OFF
-DUSE_WEBP=ON
-DUSE_WEBP=${WITH_WEBP}
-DOIIO_BUILD_TOOLS=${OIIO_TOOLS}
-DOIIO_BUILD_TESTS=OFF
-DBUILD_TESTING=OFF
@@ -67,9 +99,14 @@ set(OPENIMAGEIO_EXTRA_ARGS
-DPNG_PNG_INCLUDE_DIR=${LIBDIR}/png/include
-DTIFF_LIBRARY=${LIBDIR}/tiff/lib/${LIBPREFIX}tiff${LIBEXT}
-DTIFF_INCLUDE_DIR=${LIBDIR}/tiff/include
-DJPEG_LIBRARY=${LIBDIR}/jpeg/lib/${JPEG_LIBRARY}
-DJPEG_INCLUDE_DIR=${LIBDIR}/jpeg/include
-DJPEG_LIBRARY=${LIBDIR}/jpg/lib/${JPEG_LIBRARY}
-DJPEG_INCLUDE_DIR=${LIBDIR}/jpg/include
${OPENJPEG_FLAGS}
-DOpenEXR_USE_STATIC_LIBS=On
-DILMBASE_INCLUDE_DIR=${LIBDIR}/openexr/include/
-DOPENEXR_INCLUDE_DIR=${LIBDIR}/openexr/include/
-DOPENEXR_HALF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Half${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOPENEXR_IMATH_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Imath${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOPENEXR_ILMTHREAD_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmThread${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOPENEXR_IEX_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Iex${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOPENEXR_ILMIMF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}
@@ -77,14 +114,8 @@ set(OPENIMAGEIO_EXTRA_ARGS
-DUSE_EXTERNAL_PUGIXML=ON
-DPUGIXML_LIBRARY=${LIBDIR}/pugixml/lib/${LIBPREFIX}pugixml${LIBEXT}
-DPUGIXML_INCLUDE_DIR=${LIBDIR}/pugixml/include/
-DBUILD_MISSING_ROBINMAP=OFF
-DBUILD_MISSING_FMT=OFF
-DFMT_INCLUDE_DIR=${LIBDIR}/fmt/include/
-DRobinmap_ROOT=${LIBDIR}/robinmap
-DWebP_ROOT=${LIBDIR}/webp
${WEBP_FLAGS}
${OIIO_SIMD_FLAGS}
-DOpenEXR_ROOT=${LIBDIR}/openexr
-DImath_ROOT=${LIBDIR}/imath
)
ExternalProject_Add(external_openimageio
@@ -102,15 +133,12 @@ add_dependencies(
external_png
external_zlib
external_openexr
external_imath
external_jpeg
external_boost
external_tiff
external_pugixml
external_fmt
external_robinmap
external_openjpeg${OPENJPEG_POSTFIX}
external_webp
${WEBP_DEP}
)
if(WIN32)
@@ -125,8 +153,8 @@ if(WIN32)
endif()
if(BUILD_MODE STREQUAL Debug)
ExternalProject_Add_Step(external_openimageio after_install
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimageio/lib/OpenImageIO_d.lib ${HARVEST_TARGET}/openimageio/lib/OpenImageIO_d.lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimageio/lib/OpenImageIO_Util_d.lib ${HARVEST_TARGET}/openimageio/lib/OpenImageIO_Util_d.lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimageio/lib/OpenImageIO.lib ${HARVEST_TARGET}/openimageio/lib/OpenImageIO_d.lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimageio/lib/OpenImageIO_Util.lib ${HARVEST_TARGET}/openimageio/lib/OpenImageIO_Util_d.lib
DEPENDEES install
)
endif()

View File

@@ -1,26 +1,38 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
# Note the encoder/decoder may use png/tiff/lcms system libraries, but the
# library itself does not depend on them, so should give no problems.
set(OPENJPEG_EXTRA_ARGS -DBUILD_SHARED_LIBS=OFF)
if(WIN32)
set(OPENJPEG_EXTRA_ARGS -G "MSYS Makefiles" -DBUILD_PKGCONFIG_FILES=On)
else()
set(OPENJPEG_EXTRA_ARGS ${DEFAULT_CMAKE_FLAGS})
endif()
set(OPENJPEG_EXTRA_ARGS
${OPENJPEG_EXTRA_ARGS}
-DBUILD_SHARED_LIBS=OFF
-DBUILD_CODEC=OFF
)
ExternalProject_Add(external_openjpeg
URL file://${PACKAGE_DIR}/${OPENJPEG_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${OPENJPEG_HASH_TYPE}=${OPENJPEG_HASH}
PREFIX ${BUILD_DIR}/openjpeg
CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build && ${CMAKE_COMMAND} ${OPENJPEG_EXTRA_ARGS} -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openjpeg ${BUILD_DIR}/openjpeg/src/external_openjpeg
CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build && ${CMAKE_COMMAND} ${OPENJPEG_EXTRA_ARGS} -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openjpeg -DBUILD_SHARED_LIBS=Off -DBUILD_THIRDPARTY=OFF ${BUILD_DIR}/openjpeg/src/external_openjpeg
BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build/ && make -j${MAKE_THREADS}
INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build/ && make install
INSTALL_DIR ${LIBDIR}/openjpeg

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(APPLE)
set(OPENMP_PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/openmp/src/external_openmp < ${PATCH_DIR}/openmp.diff)

View File

@@ -1,25 +1,31 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(OPENSUBDIV_EXTRA_ARGS
-DNO_LIB=OFF
-DNO_EXAMPLES=ON
-DNO_TUTORIALS=ON
-DNO_REGRESSION=ON
-DNO_PYTHON=ON
-DNO_MAYA=ON
-DNO_PTEX=ON
-DNO_DOC=ON
-DNO_OMP=ON
-DNO_TBB=OFF
-DNO_CUDA=ON
-DNO_OPENCL=OFF
-DNO_CLEW=OFF
-DNO_OPENGL=OFF
-DNO_METAL=OFF
-DNO_DX=ON
-DNO_TESTS=ON
-DNO_GLTESTS=ON
-DNO_GLEW=OFF
-DNO_GLFW=OFF
-DNO_GLFW_X11=ON
-DNO_OPENCL=OFF
-DNO_TUTORIALS=ON
-DGLEW_INCLUDE_DIR=${LIBDIR}/glew/include
-DGLEW_LIBRARY=${LIBDIR}/glew/lib/libGLEW${LIBEXT}
-DGLFW_INCLUDE_DIR=${LIBDIR}/glfw/include
@@ -36,11 +42,22 @@ if(WIN32)
-DCUEW_INCLUDE_DIR=${LIBDIR}/cuew/include
-DCUEW_LIBRARY=${LIBDIR}/cuew/lib/cuew${LIBEXT}
)
if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
set(OPENSUBDIV_EXTRA_ARGS
${OPENSUBDIV_EXTRA_ARGS}
-DNO_CUDA=OFF
)
else()
set(OPENSUBDIV_EXTRA_ARGS
${OPENSUBDIV_EXTRA_ARGS}
-DNO_CUDA=ON
)
endif()
else()
set(OPENSUBDIV_EXTRA_ARGS
${OPENSUBDIV_EXTRA_ARGS}
-DTBB_INCLUDE_DIR=${LIBDIR}/tbb/include
-DTBB_tbb_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}tbb_static${LIBEXT}
-DNO_CUDA=ON
-DCUEW_INCLUDE_DIR=${LIBDIR}/cuew/include
-DCLEW_INCLUDE_DIR=${LIBDIR}/clew/include/CL
-DCLEW_LIBRARY=${LIBDIR}/clew/lib/static/${LIBPREFIX}clew${LIBEXT}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(BUILD_MODE STREQUAL Debug)
set(BLOSC_POST _d)
@@ -13,7 +29,6 @@ else()
endif()
set(OPENVDB_EXTRA_ARGS
${DEFAULT_BOOST_FLAGS}
-DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-DBoost_USE_MULTITHREADED=ON
-DBoost_USE_STATIC_LIBS=ON
@@ -25,20 +40,22 @@ set(OPENVDB_EXTRA_ARGS
-DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-DBlosc_INCLUDE_DIR=${LIBDIR}/blosc/include/
-DBlosc_LIBRARY=${LIBDIR}/blosc/lib/libblosc${BLOSC_POST}${LIBEXT}
-DBlosc_LIBRARY_RELEASE=${LIBDIR}/blosc/lib/libblosc${BLOSC_POST}${LIBEXT}
-DBlosc_LIBRARY_DEBUG=${LIBDIR}/blosc/lib/libblosc${BLOSC_POST}${LIBEXT}
-DOPENVDB_BUILD_UNITTESTS=OFF
-DOPENVDB_BUILD_PYTHON_MODULE=OFF
-DOPENVDB_BUILD_NANOVDB=ON
-DNANOVDB_BUILD_TOOLS=OFF
-DOPENVDB_ENABLE_3_ABI_COMPATIBLE=OFF
-DOPENVDB_BUILD_UNITTESTS=Off
-DOPENVDB_BUILD_PYTHON_MODULE=Off
-DBlosc_ROOT=${LIBDIR}/blosc/
-DTBB_ROOT=${LIBDIR}/tbb/
-DOpenEXR_ROOT=${LIBDIR}/openexr
-DIlmBase_ROOT=${LIBDIR}/openexr
-DOPENEXR_LIBRARYDIR=${LIBDIR}/openexr/lib
# All libs live in openexr, even the ilmbase ones
-DILMBASE_LIBRARYDIR=${LIBDIR}/openexr/lib
-DOPENVDB_CORE_SHARED=${OPENVDB_SHARED}
-DOPENVDB_CORE_STATIC=${OPENVDB_STATIC}
-DOPENVDB_BUILD_BINARIES=OFF
-DOPENVDB_BUILD_BINARIES=Off
-DCMAKE_DEBUG_POSTFIX=_d
-DBLOSC_USE_STATIC_LIBS=ON
-DUSE_NANOVDB=ON
-DILMBASE_USE_STATIC_LIBS=On
-DOPENEXR_USE_STATIC_LIBS=On
)
if(WIN32)
@@ -47,6 +64,15 @@ if(WIN32)
# needs to link pthreads due to it being a blosc dependency
set(OPENVDB_EXTRA_ARGS ${OPENVDB_EXTRA_ARGS}
-DCMAKE_CXX_STANDARD_LIBRARIES="${LIBDIR}/pthreads/lib/pthreadVC3.lib"
-DUSE_EXR=On
)
else()
# OpenVDB can't find the _static libraries automatically.
set(OPENVDB_EXTRA_ARGS ${OPENVDB_EXTRA_ARGS}
-DTbb_LIBRARIES=${LIBDIR}/tbb/lib/${LIBPREFIX}tbb_static${LIBEXT}
-DTbb_tbb_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}tbb_static${LIBEXT}
-DTbb_tbbmalloc_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}tbbmalloc_static${LIBEXT}
-DTbb_tbbmalloc_proxy_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}tbbmalloc_proxy_static${LIBEXT}
)
endif()
@@ -64,6 +90,7 @@ add_dependencies(
openvdb
external_tbb
external_boost
external_openexr
external_zlib
external_blosc
)
@@ -71,7 +98,7 @@ add_dependencies(
if(WIN32)
if(BUILD_MODE STREQUAL Release)
ExternalProject_Add_Step(openvdb after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openvdb/include ${HARVEST_TARGET}/openvdb/include
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openvdb/include/openvdb ${HARVEST_TARGET}/openvdb/include/openvdb
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openvdb/lib/openvdb.lib ${HARVEST_TARGET}/openvdb/lib/openvdb.lib
COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openvdb/bin/openvdb.dll ${HARVEST_TARGET}/openvdb/bin/openvdb.dll
DEPENDEES install

View File

@@ -1,8 +1,25 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
option(ENABLE_MINGW64 "Enable building of ffmpeg/iconv/libsndfile/fftw3 by installing mingw64" ON)
endif()
option(WITH_WEBP "Enable building of oiio with webp support" OFF)
option(WITH_BOOST_PYTHON "Enable building of boost with python support" OFF)
cmake_host_system_information(RESULT NUM_CORES QUERY NUMBER_OF_LOGICAL_CORES)
set(MAKE_THREADS ${NUM_CORES} CACHE STRING "Number of threads to run make with")
@@ -22,7 +39,7 @@ endif()
set(DOWNLOAD_DIR "${CMAKE_CURRENT_BINARY_DIR}/downloads" CACHE STRING "Path for downloaded files")
# This path must be hard-coded like this, so that the GNUmakefile knows where it is and can pass it to make_source_archive.py:
set(PACKAGE_DIR "${CMAKE_CURRENT_BINARY_DIR}/packages")
option(PACKAGE_USE_UPSTREAM_SOURCES "Use sources upstream to download the package sources, when OFF the blender mirror will be used" ON)
option(PACKAGE_USE_UPSTREAM_SOURCES "Use soures upstream to download the package sources, when OFF the blender mirror will be used" ON)
file(TO_CMAKE_PATH ${DOWNLOAD_DIR} DOWNLOAD_DIR)
file(TO_CMAKE_PATH ${PACKAGE_DIR} PACKAGE_DIR)
@@ -41,29 +58,29 @@ if(WIN32)
set(LIBPREFIX "")
# For OIIO and OSL
set(COMMON_DEFINES /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS)
set(COMMON_DEFINES /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS)
if(MSVC_VERSION GREATER 1909)
set(COMMON_MSVC_FLAGS "/Wv:18") #some deps with warnings as error aren't quite ready for dealing with the new 2017 warnings.
endif()
string(APPEND COMMON_MSVC_FLAGS " /bigobj")
if(WITH_OPTIMIZED_DEBUG)
set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MDd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MDd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
else()
set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MDd ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /D_DEBUG /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MDd ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /D_DEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
endif()
set(BLENDER_CMAKE_C_FLAGS_MINSIZEREL "/MD ${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_C_FLAGS_RELEASE "/MD ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO "/MD ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_C_FLAGS_MINSIZEREL "/MD ${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_C_FLAGS_RELEASE "/MD ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO "/MD ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
if(WITH_OPTIMIZED_DEBUG)
set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/MDd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/MDd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
else()
set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/D_DEBUG /D PLATFORM_WINDOWS /MTd ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/D_DEBUG /D PLATFORM_WINDOWS /MTd ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
endif()
set(BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL "/MD /${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_CXX_FLAGS_RELEASE "/MD ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_CXX_FLAGS_RELWITHDEBINFO "/MD ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=2 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL "/MD /${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_CXX_FLAGS_RELEASE "/MD ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(BLENDER_CMAKE_CXX_FLAGS_RELWITHDEBINFO "/MD ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
set(PLATFORM_FLAGS)
set(PLATFORM_CXX_FLAGS)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_opus
URL file://${PACKAGE_DIR}/${OPUS_FILE}

View File

@@ -1,17 +1,51 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
set(OSL_CMAKE_CXX_STANDARD_LIBRARIES "kernel32${LIBEXT} user32${LIBEXT} gdi32${LIBEXT} winspool${LIBEXT} shell32${LIBEXT} ole32${LIBEXT} oleaut32${LIBEXT} uuid${LIBEXT} comdlg32${LIBEXT} advapi32${LIBEXT} psapi${LIBEXT}")
set(OSL_FLEX_BISON -DFLEX_EXECUTABLE=${LIBDIR}/flexbison/win_flex.exe -DBISON_EXECUTABLE=${LIBDIR}/flexbison/win_bison.exe)
set(OSL_SIMD_FLAGS -DOIIO_NOSIMD=1 -DOIIO_SIMD=sse2)
else()
set(OSL_CMAKE_CXX_STANDARD_LIBRARIES)
set(OSL_FLEX_BISON)
set(OSL_OPENIMAGEIO_LIBRARY "${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO${LIBEXT};${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO_Util${LIBEXT};${LIBDIR}/png/lib/${LIBPREFIX}png16${LIBEXT};${LIBDIR}/jpeg/lib/${LIBPREFIX}jpeg${LIBEXT};${LIBDIR}/tiff/lib/${LIBPREFIX}tiff${LIBEXT};${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}")
set(OSL_OPENIMAGEIO_LIBRARY "${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO${LIBEXT};${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO_Util${LIBEXT};${LIBDIR}/png/lib/${LIBPREFIX}png16${LIBEXT};${LIBDIR}/jpg/lib/${LIBPREFIX}jpeg${LIBEXT};${LIBDIR}/tiff/lib/${LIBPREFIX}tiff${LIBEXT};${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}")
endif()
set(OSL_ILMBASE_CUSTOM_LIBRARIES "${LIBDIR}/openexr/lib/Imath${OPENEXR_VERSION_POSTFIX}.lib^^${LIBDIR}/openexr/lib/Half{OPENEXR_VERSION_POSTFIX}.lib^^${LIBDIR}/openexr/lib/IlmThread${OPENEXR_VERSION_POSTFIX}.lib^^${LIBDIR}/openexr/lib/Iex${OPENEXR_VERSION_POSTFIX}.lib")
set(OSL_EXTRA_ARGS
${DEFAULT_BOOST_FLAGS}
-DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-DBoost_USE_MULTITHREADED=ON
-DBoost_USE_STATIC_LIBS=ON
-DBoost_USE_STATIC_RUNTIME=OFF
-DBOOST_ROOT=${LIBDIR}/boost
-DBOOST_LIBRARYDIR=${LIBDIR}/boost/lib/
-DBoost_NO_SYSTEM_PATHS=ON
-DBoost_NO_BOOST_CMAKE=ON
-DOpenEXR_ROOT=${LIBDIR}/openexr/
-DIlmBase_ROOT=${LIBDIR}/openexr/
-DILMBASE_INCLUDE_DIR=${LIBDIR}/openexr/include/
-DOPENEXR_HALF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Half${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOPENEXR_IMATH_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Imath${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOPENEXR_ILMTHREAD_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmThread${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOPENEXR_IEX_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Iex${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOPENEXR_INCLUDE_DIR=${LIBDIR}/openexr/include/
-DOPENEXR_ILMIMF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOpenImageIO_ROOT=${LIBDIR}/openimageio/
-DOSL_BUILD_TESTS=OFF
-DOSL_BUILD_MATERIALX=OFF
@@ -31,10 +65,10 @@ set(OSL_EXTRA_ARGS
-DUSE_QT=OFF
-DUSE_Qt5=OFF
-DINSTALL_DOCS=OFF
${OSL_SIMD_FLAGS}
-Dpugixml_ROOT=${LIBDIR}/pugixml
-DUSE_PYTHON=OFF
-DCMAKE_CXX_STANDARD=14
-DImath_ROOT=${LIBDIR}/imath
)
ExternalProject_Add(external_osl

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(MSVC)
set(PYTARGET ${HARVEST_TARGET}/python/${PYTHON_SHORT_VERSION_NO_DOTS})
@@ -8,7 +24,7 @@ if(MSVC)
add_custom_command(
OUTPUT ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
COMMAND echo packaging python
COMMAND echo this should output at ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
COMMAND echo this should ouput at ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
COMMAND ${CMAKE_COMMAND} -E make_directory ${PYTARGET}/libs
COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}.lib ${PYTARGET}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}.lib
COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python.exe ${PYTARGET}/bin/python.exe
@@ -27,7 +43,7 @@ if(MSVC)
add_custom_command(
OUTPUT ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
COMMAND echo packaging python
COMMAND echo this should output at ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
COMMAND echo this should ouput at ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
COMMAND ${CMAKE_COMMAND} -E make_directory ${PYTARGET}/libs
COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib ${PYTARGET}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib
COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python${PYTHON_POSTFIX}.exe ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(PNG_EXTRA_ARGS
-DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(POTRACE_EXTRA_ARGS
)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(PUGIXML_EXTRA_ARGS
)

View File

@@ -1,22 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set(PYSTRING_EXTRA_ARGS
)
ExternalProject_Add(external_pystring
URL file://${PACKAGE_DIR}/${PYSTRING_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${PYSTRING_HASH_TYPE}=${PYSTRING_HASH}
PREFIX ${BUILD_DIR}/pystring
PATCH_COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/cmakelists_pystring.txt ${BUILD_DIR}/pystring/src/external_pystring/CMakeLists.txt
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/pystring ${DEFAULT_CMAKE_FLAGS} ${PYSTRING_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/pystring
)
if(WIN32)
ExternalProject_Add_Step(external_pystring after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/pystring/lib ${HARVEST_TARGET}/pystring/lib
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/pystring/include ${HARVEST_TARGET}/pystring/include
DEPENDEES install
)
endif()

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(PYTHON_POSTFIX)
if(BUILD_MODE STREQUAL Debug)

View File

@@ -1,21 +1,31 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32 AND BUILD_MODE STREQUAL Debug)
set(SITE_PACKAGES_EXTRA --global-option build --global-option --debug)
# zstandard is determined to build and link release mode libs in a debug
# configuration, the only way to make it happy is to bend to its will
# and give it a library to link with.
set(PIP_CONFIGURE_COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/python/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}_d.lib ${LIBDIR}/python/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}.lib)
else()
set(PIP_CONFIGURE_COMMAND echo ".")
endif()
ExternalProject_Add(external_python_site_packages
DOWNLOAD_COMMAND ""
CONFIGURE_COMMAND ${PIP_CONFIGURE_COMMAND}
CONFIGURE_COMMAND ""
BUILD_COMMAND ""
PREFIX ${BUILD_DIR}/site_packages
INSTALL_COMMAND ${PYTHON_BINARY} -m pip install --no-cache-dir ${SITE_PACKAGES_EXTRA} cython==${CYTHON_VERSION} idna==${IDNA_VERSION} charset-normalizer==${CHARSET_NORMALIZER_VERSION} urllib3==${URLLIB3_VERSION} certifi==${CERTIFI_VERSION} requests==${REQUESTS_VERSION} zstandard==${ZSTANDARD_VERSION} --no-binary :all:
INSTALL_COMMAND ${PYTHON_BINARY} -m pip install ${SITE_PACKAGES_EXTRA} cython==${CYTHON_VERSION} idna==${IDNA_VERSION} chardet==${CHARDET_VERSION} urllib3==${URLLIB3_VERSION} certifi==${CERTIFI_VERSION} requests==${REQUESTS_VERSION} --no-binary :all:
)
if(USE_PIP_NUMPY)

View File

@@ -1,22 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set(ROBINMAP_EXTRA_ARGS
)
ExternalProject_Add(external_robinmap
URL file://${PACKAGE_DIR}/${ROBINMAP_FILE}
DOWNLOAD_DIR ${DOWNLOAD_DIR}
URL_HASH ${ROBINMAP_HASH_TYPE}=${ROBINMAP_HASH}
PREFIX ${BUILD_DIR}/robinmap
CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/robinmap ${DEFAULT_CMAKE_FLAGS} ${ROBINMAP_EXTRA_ARGS}
INSTALL_DIR ${LIBDIR}/robinmap
)
if(WIN32)
if(BUILD_MODE STREQUAL Release)
ExternalProject_Add_Step(external_robinmap after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/zstd/include/ ${HARVEST_TARGET}/zstd/include/
DEPENDEES install
)
endif()
endif()

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
set(SDL_EXTRA_ARGS

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
####################################################################################################################
# Mingw64 Builds

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(SNDFILE_EXTRA_ARGS)
set(SNDFILE_ENV PKG_CONFIG_PATH=${mingw_LIBDIR}/ogg/lib/pkgconfig:${mingw_LIBDIR}/vorbis/lib/pkgconfig:${mingw_LIBDIR}/flac/lib/pkgconfig:${mingw_LIBDIR})

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_spnav
URL file://${PACKAGE_DIR}/${SPNAV_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(SQLITE_CONFIGURE_ENV echo .)
set(SQLITE_CONFIGURATION_ARGS)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_sse2neon
GIT_REPOSITORY ${SSE2NEON_GIT}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(SSL_CONFIGURE_COMMAND ./Configure)
set(SSL_PATCH_CMD echo .)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
set(TBB_EXTRA_ARGS
-DTBB_BUILD_SHARED=On

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(UNIX)
set(THEORA_CONFIGURE_ENV ${CONFIGURE_ENV} && export HAVE_PDFLATEX=no)

View File

@@ -1,4 +1,26 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WITH_WEBP)
set(WITH_TIFF_WEBP ON)
else()
set(WITH_TIFF_WEBP OFF)
endif()
set(TIFF_EXTRA_ARGS
-DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
@@ -8,7 +30,7 @@ set(TIFF_EXTRA_ARGS
-Dlzma=OFF
-Djbig=OFF
-Dzstd=OFF
-Dwebp=OFF
-Dwebp=${WITH_TIFF_WEBP}
)
ExternalProject_Add(external_tiff

View File

@@ -1,59 +1,55 @@
# SPDX-License-Identifier: GPL-2.0-or-later
if(WIN32)
# OIIO and OSL are statically linked for us, but USD doesn't know
set(USD_CXX_FLAGS "${CMAKE_CXX_FLAGS} /DOIIO_STATIC_DEFINE /DOSL_STATIC_DEFINE")
if(BUILD_MODE STREQUAL Debug)
# USD does not look for debug libs, nor does it link them
# when building static, so this is just to keep find_package happy
# if we ever link dynamically on windows util will need to be linked as well.
set(USD_OIIO_CMAKE_DEFINES "-DOIIO_LIBRARIES=${LIBDIR}/openimageio/lib/OpenImageIO_d${LIBEXT}")
endif()
set(USD_PLATFORM_FLAGS
${USD_OIIO_CMAKE_DEFINES}
-DCMAKE_CXX_FLAGS=${USD_CXX_FLAGS}
)
endif()
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(USD_EXTRA_ARGS
${DEFAULT_BOOST_FLAGS}
${USD_PLATFORM_FLAGS}
# This is a preventative measure that avoids possible conflicts when add-ons
# try to load another USD library into the same process space.
-DPXR_SET_INTERNAL_NAMESPACE=usdBlender
-DOPENSUBDIV_ROOT_DIR=${LIBDIR}/opensubdiv
-DOpenImageIO_ROOT=${LIBDIR}/openimageio
-DOPENEXR_LIBRARIES=${LIBDIR}/imath/lib/imath${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-DOPENEXR_INCLUDE_DIR=${LIBDIR}/imath/include
-DOSL_ROOT=${LIBDIR}/osl
-DPXR_ENABLE_PYTHON_SUPPORT=OFF
-DPXR_BUILD_IMAGING=ON
-DPXR_BUILD_TESTS=OFF
-DPXR_BUILD_EXAMPLES=OFF
-DPXR_BUILD_TUTORIALS=OFF
-DPXR_ENABLE_HDF5_SUPPORT=OFF
-DPXR_ENABLE_MATERIALX_SUPPORT=OFF
-DPXR_ENABLE_OPENVDB_SUPPORT=OFF
-DPYTHON_EXECUTABLE=${PYTHON_BINARY}
-DPXR_BUILD_MONOLITHIC=ON
-DPXR_ENABLE_OSL_SUPPORT=ON
-DPXR_BUILD_OPENIMAGEIO_PLUGIN=ON
# USD 22.03 does not support OCIO 2.x
# Tracking ticket https://github.com/PixarAnimationStudios/USD/issues/1386
-DPXR_BUILD_OPENCOLORIO_PLUGIN=OFF
-DPXR_ENABLE_PTEX_SUPPORT=OFF
-DPXR_BUILD_USD_TOOLS=OFF
-DCMAKE_DEBUG_POSTFIX=_d
-DBUILD_SHARED_LIBS=Off
# USD is hellbound on making a shared lib, unless you point this variable to a valid cmake file
# doesn't have to make sense, but as long as it points somewhere valid it will skip the shared lib.
-DPXR_MONOLITHIC_IMPORT=${BUILD_DIR}/usd/src/external_usd/cmake/defaults/Version.cmake
-DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-DBoost_USE_MULTITHREADED=ON
-DBoost_USE_STATIC_LIBS=ON
-DBoost_USE_STATIC_RUNTIME=OFF
-DBOOST_ROOT=${LIBDIR}/boost
-DBoost_NO_SYSTEM_PATHS=ON
-DBoost_NO_BOOST_CMAKE=ON
-DTBB_INCLUDE_DIRS=${LIBDIR}/tbb/include
-DTBB_LIBRARIES=${LIBDIR}/tbb/lib/${LIBPREFIX}${TBB_LIBRARY}${LIBEXT}
-DTbb_TBB_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}${TBB_LIBRARY}${LIBEXT}
# USD wants the tbb debug lib set even when you are doing a release build
# Otherwise it will error out during the cmake configure phase.
-DTBB_LIBRARIES_DEBUG=${LIBDIR}/tbb/lib/${LIBPREFIX}${TBB_LIBRARY}${LIBEXT}
# This is a preventative measure that avoids possible conflicts when add-ons
# try to load another USD library into the same process space.
-DPXR_SET_INTERNAL_NAMESPACE=usdBlender
-DPXR_ENABLE_PYTHON_SUPPORT=OFF
-DPXR_BUILD_IMAGING=OFF
-DPXR_BUILD_TESTS=OFF
-DBUILD_SHARED_LIBS=OFF
-DPYTHON_EXECUTABLE=${PYTHON_BINARY}
-DPXR_BUILD_MONOLITHIC=ON
# The PXR_BUILD_USD_TOOLS argument is patched-in by usd.diff. An upstream pull request
# can be found at https://github.com/PixarAnimationStudios/USD/pull/1048.
-DPXR_BUILD_USD_TOOLS=OFF
-DCMAKE_DEBUG_POSTFIX=_d
# USD is hellbound on making a shared lib, unless you point this variable to a valid cmake file
# doesn't have to make sense, but as long as it points somewhere valid it will skip the shared lib.
-DPXR_MONOLITHIC_IMPORT=${BUILD_DIR}/usd/src/external_usd/cmake/defaults/Version.cmake
)
ExternalProject_Add(external_usd
@@ -70,33 +66,29 @@ add_dependencies(
external_usd
external_tbb
external_boost
external_openimageio
external_opensubdiv
external_osl
)
# Since USD 21.11 the libraries are prefixed with "usd_", i.e. "libusd_m.a" became "libusd_usd_m.a".
# See https://github.com/PixarAnimationStudios/USD/blob/release/CHANGELOG.md#2111---2021-11-01
if(NOT WIN32)
if (USD_VERSION VERSION_LESS 21.11)
set(PXR_LIB_PREFIX "")
else()
set(PXR_LIB_PREFIX "usd_")
endif()
endif()
if(WIN32)
# USD currently demands python be available at build time
# and then proceeds not to use it, but still checks that the
# version of the interpreter it is not going to use is atleast 2.7
# so we need this dep currently since there is no system python
# on windows.
add_dependencies(
external_usd
external_python
)
if(BUILD_MODE STREQUAL Release)
ExternalProject_Add_Step(external_usd after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/usd/ ${HARVEST_TARGET}/usd
COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/usd/src/external_usd-build/pxr/Release/usd_usd_m.lib ${HARVEST_TARGET}/usd/lib/usd_usd_m.lib
COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/usd/src/external_usd-build/pxr/Release/usd_m.lib ${HARVEST_TARGET}/usd/lib/libusd_m.lib
DEPENDEES install
)
endif()
if(BUILD_MODE STREQUAL Debug)
ExternalProject_Add_Step(external_usd after_install
COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/usd/lib ${HARVEST_TARGET}/usd/lib
COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/usd/src/external_usd-build/pxr/Debug/usd_usd_m_d.lib ${HARVEST_TARGET}/usd/lib/usd_usd_m_d.lib
COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/usd/src/external_usd-build/pxr/Debug/usd_m_d.lib ${HARVEST_TARGET}/usd/lib/libusd_m_d.lib
DEPENDEES install
)
endif()
@@ -108,7 +100,7 @@ else()
# case (only the shared library). As a result, we need to grab the `libusd_m.a`
# file from the build directory instead of from the install directory.
ExternalProject_Add_Step(external_usd after_install
COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/usd/src/external_usd-build/pxr/lib${PXR_LIB_PREFIX}usd_m.a ${HARVEST_TARGET}/usd/lib/lib${PXR_LIB_PREFIX}usd_m.a
COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/usd/src/external_usd-build/pxr/libusd_m.a ${HARVEST_TARGET}/usd/lib/libusd_m.a
DEPENDEES install
)
endif()

View File

@@ -1,14 +1,30 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(ZLIB_VERSION 1.2.12)
set(ZLIB_VERSION 1.2.11)
set(ZLIB_URI https://zlib.net/zlib-${ZLIB_VERSION}.tar.gz)
set(ZLIB_HASH 5fc414a9726be31427b440b434d05f78)
set(ZLIB_HASH 1c9f62f0778697a09d36121ead88e08e)
set(ZLIB_HASH_TYPE MD5)
set(ZLIB_FILE zlib-${ZLIB_VERSION}.tar.gz)
set(OPENAL_VERSION 1.21.1)
set(OPENAL_VERSION 1.20.1)
set(OPENAL_URI http://openal-soft.org/openal-releases/openal-soft-${OPENAL_VERSION}.tar.bz2)
set(OPENAL_HASH a936806ebd8de417b0ffd8cf3f48f456)
set(OPENAL_HASH 556695068ce8375b89986083d810fd35)
set(OPENAL_HASH_TYPE MD5)
set(OPENAL_FILE openal-soft-${OPENAL_VERSION}.tar.bz2)
@@ -18,24 +34,24 @@ set(PNG_HASH 505e70834d35383537b6491e7ae8641f1a4bed1876dbfe361201fc80868d88ca)
set(PNG_HASH_TYPE SHA256)
set(PNG_FILE libpng-${PNG_VERSION}.tar.xz)
set(JPEG_VERSION 2.1.3)
set(JPEG_VERSION 2.0.4)
set(JPEG_URI https://github.com/libjpeg-turbo/libjpeg-turbo/archive/${JPEG_VERSION}.tar.gz)
set(JPEG_HASH 627b980fad0573e08e4c3b80b290fc91)
set(JPEG_HASH 44c43e4a9fb352f47090804529317c88)
set(JPEG_HASH_TYPE MD5)
set(JPEG_FILE libjpeg-turbo-${JPEG_VERSION}.tar.gz)
set(BOOST_VERSION 1.78.0)
set(BOOST_VERSION_SHORT 1.78)
set(BOOST_VERSION_NODOTS 1_78_0)
set(BOOST_VERSION_NODOTS_SHORT 1_78)
set(BOOST_VERSION 1.73.0)
set(BOOST_VERSION_NODOTS 1_73_0)
set(BOOST_VERSION_NODOTS_SHORT 1_73)
set(BOOST_URI https://boostorg.jfrog.io/artifactory/main/release/${BOOST_VERSION}/source/boost_${BOOST_VERSION_NODOTS}.tar.gz)
set(BOOST_HASH c2f6428ac52b0e5a3c9b2e1d8cc832b5)
set(BOOST_HASH 4036cd27ef7548b8d29c30ea10956196)
set(BOOST_HASH_TYPE MD5)
set(BOOST_FILE boost_${BOOST_VERSION_NODOTS}.tar.gz)
set(BLOSC_VERSION 1.21.1)
# Using old version as recommended by OpenVDB build documentation.
set(BLOSC_VERSION 1.5.0)
set(BLOSC_URI https://github.com/Blosc/c-blosc/archive/v${BLOSC_VERSION}.tar.gz)
set(BLOSC_HASH 134b55813b1dca57019d2a2dc1f7a923)
set(BLOSC_HASH 6e4a49c8c06f05aa543f3312cfce3d55)
set(BLOSC_HASH_TYPE MD5)
set(BLOSC_FILE blosc-${BLOSC_VERSION}.tar.gz)
@@ -45,19 +61,12 @@ set(PTHREADS_HASH f3bf81bb395840b3446197bcf4ecd653)
set(PTHREADS_HASH_TYPE MD5)
set(PTHREADS_FILE pthreads4w-code-${PTHREADS_VERSION}.zip)
set(OPENEXR_VERSION 3.1.4)
set(OPENEXR_VERSION 2.5.5)
set(OPENEXR_URI https://github.com/AcademySoftwareFoundation/openexr/archive/v${OPENEXR_VERSION}.tar.gz)
set(OPENEXR_HASH e990be1ff765797bc2d93a8060e1c1f2)
set(OPENEXR_HASH 85e8a979092c9055d10ed103062d31a0)
set(OPENEXR_HASH_TYPE MD5)
set(OPENEXR_FILE openexr-${OPENEXR_VERSION}.tar.gz)
set(IMATH_VERSION 3.1.4)
set(IMATH_URI https://github.com/AcademySoftwareFoundation/Imath/archive/v${OPENEXR_VERSION}.tar.gz)
set(IMATH_HASH fddf14ec73e12c34e74c3c175e311a3f)
set(IMATH_HASH_TYPE MD5)
set(IMATH_FILE imath-${IMATH_VERSION}.tar.gz)
if(WIN32)
# Openexr started appending _d on its own so now
# we need to tell the build the postfix is _s while
@@ -74,9 +83,9 @@ else()
set(OPENEXR_VERSION_POSTFIX)
endif()
set(FREETYPE_VERSION 2.11.1)
set(FREETYPE_VERSION 2.10.2)
set(FREETYPE_URI http://prdownloads.sourceforge.net/freetype/freetype-${FREETYPE_VERSION}.tar.gz)
set(FREETYPE_HASH bd4e3b007474319909a6b79d50908e85)
set(FREETYPE_HASH b1cb620e4c875cd4d1bfa04945400945)
set(FREETYPE_HASH_TYPE MD5)
set(FREETYPE_FILE freetype-${FREETYPE_VERSION}.tar.gz)
@@ -92,9 +101,9 @@ set(FREEGLUT_HASH 90c3ca4dd9d51cf32276bc5344ec9754)
set(FREEGLUT_HASH_TYPE MD5)
set(FREEGLUT_FILE freeglut-${FREEGLUT_VERSION}.tar.gz)
set(ALEMBIC_VERSION 1.8.3)
set(ALEMBIC_VERSION 1.7.16)
set(ALEMBIC_URI https://github.com/alembic/alembic/archive/${ALEMBIC_VERSION}.tar.gz)
set(ALEMBIC_HASH 2cd8d6e5a3ac4a014e24a4b04f4fadf9)
set(ALEMBIC_HASH effcc86e42fe6605588e3de57bde6677)
set(ALEMBIC_HASH_TYPE MD5)
set(ALEMBIC_FILE alembic-${ALEMBIC_VERSION}.tar.gz)
@@ -119,15 +128,15 @@ set(CUEW_HASH 86760d62978ebfd96cd93f5aa1abaf4a)
set(CUEW_HASH_TYPE MD5)
set(CUEW_FILE cuew-${CUEW_GIT_UID}.zip)
set(OPENSUBDIV_VERSION v3_4_4)
set(OPENSUBDIV_VERSION v3_4_3)
set(OPENSUBDIV_URI https://github.com/PixarAnimationStudios/OpenSubdiv/archive/${OPENSUBDIV_VERSION}.tar.gz)
set(OPENSUBDIV_HASH 39ecc5caf0abebc943d1ce131855e76e)
set(OPENSUBDIV_HASH 7bbfa275d021fb829e521df749160edb)
set(OPENSUBDIV_HASH_TYPE MD5)
set(OPENSUBDIV_FILE opensubdiv-${OPENSUBDIV_VERSION}.tar.gz)
set(SDL_VERSION 2.0.20)
set(SDL_VERSION 2.0.12)
set(SDL_URI https://www.libsdl.org/release/SDL2-${SDL_VERSION}.tar.gz)
set(SDL_HASH a53acc02e1cca98c4123229069b67c9e)
set(SDL_HASH 783b6f2df8ff02b19bb5ce492b99c8ff)
set(SDL_HASH_TYPE MD5)
set(SDL_FILE SDL2-${SDL_VERSION}.tar.gz)
@@ -137,9 +146,9 @@ set(OPENCOLLADA_HASH ee7dae874019fea7be11613d07567493)
set(OPENCOLLADA_HASH_TYPE MD5)
set(OPENCOLLADA_FILE opencollada-${OPENCOLLADA_VERSION}.tar.gz)
set(OPENCOLORIO_VERSION 2.1.1)
set(OPENCOLORIO_VERSION 2.0.0)
set(OPENCOLORIO_URI https://github.com/AcademySoftwareFoundation/OpenColorIO/archive/v${OPENCOLORIO_VERSION}.tar.gz)
set(OPENCOLORIO_HASH 604f562e073f23d88ce89ed4f7f709ba)
set(OPENCOLORIO_HASH 1a2e3478b6cd9a1549f24e1b2205e3f0)
set(OPENCOLORIO_HASH_TYPE MD5)
set(OPENCOLORIO_FILE OpenColorIO-${OPENCOLORIO_VERSION}.tar.gz)
@@ -162,74 +171,61 @@ set(OPENMP_URI https://github.com/llvm/llvm-project/releases/download/llvmorg-${
set(OPENMP_HASH_TYPE MD5)
set(OPENMP_FILE openmp-${OPENMP_VERSION}.src.tar.xz)
set(OPENIMAGEIO_VERSION v2.3.13.0)
set(OPENIMAGEIO_URI https://github.com/OpenImageIO/oiio/archive/refs/tags/${OPENIMAGEIO_VERSION}.tar.gz)
set(OPENIMAGEIO_HASH de45fb38501c4581062b522b53b6141c)
set(OPENIMAGEIO_VERSION 2.2.15.1)
set(OPENIMAGEIO_URI https://github.com/OpenImageIO/oiio/archive/Release-${OPENIMAGEIO_VERSION}.tar.gz)
set(OPENIMAGEIO_HASH 3db5c5f0b3dc91597c75e5df09eb9072)
set(OPENIMAGEIO_HASH_TYPE MD5)
set(OPENIMAGEIO_FILE OpenImageIO-${OPENIMAGEIO_VERSION}.tar.gz)
# 8.0.0 is currently oiio's preferred vesion although never versions may be available.
# the preferred version can be found in oiio's externalpackages.cmake
set(FMT_VERSION 8.0.0)
set(FMT_URI https://github.com/fmtlib/fmt/archive/refs/tags/${FMT_VERSION}.tar.gz)
set(FMT_HASH 7bce0e9e022e586b178b150002e7c2339994e3c2bbe44027e9abb0d60f9cce83)
set(FMT_HASH_TYPE SHA256)
set(FMT_FILE fmt-${FMT_VERSION}.tar.gz)
# 0.6.2 is currently oiio's preferred vesion although never versions may be available.
# the preferred version can be found in oiio's externalpackages.cmake
set(ROBINMAP_VERSION v0.6.2)
set(ROBINMAP_URI https://github.com/Tessil/robin-map/archive/refs/tags/${ROBINMAP_VERSION}.tar.gz)
set(ROBINMAP_HASH c08ec4b1bf1c85eb0d6432244a6a89862229da1cb834f3f90fba8dc35d8c8ef1)
set(ROBINMAP_HASH_TYPE SHA256)
set(ROBINMAP_FILE robinmap-${ROBINMAP_VERSION}.tar.gz)
set(TIFF_VERSION 4.3.0)
set(TIFF_VERSION 4.1.0)
set(TIFF_URI http://download.osgeo.org/libtiff/tiff-${TIFF_VERSION}.tar.gz)
set(TIFF_HASH 0a2e4744d1426a8fc8211c0cdbc3a1b3)
set(TIFF_HASH 2165e7aba557463acc0664e71a3ed424)
set(TIFF_HASH_TYPE MD5)
set(TIFF_FILE tiff-${TIFF_VERSION}.tar.gz)
set(OSL_VERSION 1.11.17.0)
set(OSL_VERSION 1.11.14.1)
set(OSL_URI https://github.com/imageworks/OpenShadingLanguage/archive/Release-${OSL_VERSION}.tar.gz)
set(OSL_HASH 63265472ce14548839ace2e21e401544)
set(OSL_HASH 1abd7ce40481771a9fa937f19595d2f2)
set(OSL_HASH_TYPE MD5)
set(OSL_FILE OpenShadingLanguage-${OSL_VERSION}.tar.gz)
set(PYTHON_VERSION 3.10.2)
set(PYTHON_SHORT_VERSION 3.10)
set(PYTHON_SHORT_VERSION_NO_DOTS 310)
set(PYTHON_VERSION 3.9.2)
set(PYTHON_SHORT_VERSION 3.9)
set(PYTHON_SHORT_VERSION_NO_DOTS 39)
set(PYTHON_URI https://www.python.org/ftp/python/${PYTHON_VERSION}/Python-${PYTHON_VERSION}.tar.xz)
set(PYTHON_HASH 14e8c22458ed7779a1957b26cde01db9)
set(PYTHON_HASH f0dc9000312abeb16de4eccce9a870ab)
set(PYTHON_HASH_TYPE MD5)
set(PYTHON_FILE Python-${PYTHON_VERSION}.tar.xz)
set(TBB_VERSION 2020_U3)
set(TBB_VERSION 2020_U2)
set(TBB_URI https://github.com/oneapi-src/oneTBB/archive/${TBB_VERSION}.tar.gz)
set(TBB_HASH 55ec8df6eae5ed6364a47f0e671e460c)
set(TBB_HASH 1b711ae956524855088df3bbf5ec65dc)
set(TBB_HASH_TYPE MD5)
set(TBB_FILE oneTBB-${TBB_VERSION}.tar.gz)
set(OPENVDB_VERSION 9.0.0)
set(OPENVDB_VERSION 8.0.1)
set(OPENVDB_URI https://github.com/AcademySoftwareFoundation/openvdb/archive/v${OPENVDB_VERSION}.tar.gz)
set(OPENVDB_HASH 684ce40c2f74f3a0c9cac530e1c7b07e)
set(OPENVDB_HASH 01b490be16cc0e15c690f9a153c21461)
set(OPENVDB_HASH_TYPE MD5)
set(OPENVDB_FILE openvdb-${OPENVDB_VERSION}.tar.gz)
set(IDNA_VERSION 3.3)
set(CHARSET_NORMALIZER_VERSION 2.0.10)
set(URLLIB3_VERSION 1.26.8)
set(CERTIFI_VERSION 2021.10.8)
set(REQUESTS_VERSION 2.27.1)
set(CYTHON_VERSION 0.29.26)
# The version of the zstd library used to build the Python package should match ZSTD_VERSION defined below.
# At this time of writing, 0.17.0 was already released, but built against zstd 1.5.1, while we use 1.5.0.
set(ZSTANDARD_VERSION 0.16.0)
set(NANOVDB_GIT_UID dc37d8a631922e7bef46712947dc19b755f3e841)
set(NANOVDB_URI https://github.com/AcademySoftwareFoundation/openvdb/archive/${NANOVDB_GIT_UID}.tar.gz)
set(NANOVDB_HASH e7b9e863ec2f3b04ead171dec2322807)
set(NANOVDB_HASH_TYPE MD5)
set(NANOVDB_FILE nano-vdb-${NANOVDB_GIT_UID}.tar.gz)
set(NUMPY_VERSION 1.22.0)
set(NUMPY_SHORT_VERSION 1.22)
set(IDNA_VERSION 2.10)
set(CHARDET_VERSION 4.0.0)
set(URLLIB3_VERSION 1.26.3)
set(CERTIFI_VERSION 2020.12.5)
set(REQUESTS_VERSION 2.25.1)
set(CYTHON_VERSION 0.29.21)
set(NUMPY_VERSION 1.19.5)
set(NUMPY_SHORT_VERSION 1.19)
set(NUMPY_URI https://github.com/numpy/numpy/releases/download/v${NUMPY_VERSION}/numpy-${NUMPY_VERSION}.zip)
set(NUMPY_HASH 252de134862a27bd66705d29622edbfe)
set(NUMPY_HASH f6a1b48717c552bbc18f1adc3cc1fe0e)
set(NUMPY_HASH_TYPE MD5)
set(NUMPY_FILE numpy-${NUMPY_VERSION}.zip)
@@ -239,15 +235,15 @@ set(LAME_HASH 83e260acbe4389b54fe08e0bdbf7cddb)
set(LAME_HASH_TYPE MD5)
set(LAME_FILE lame-${LAME_VERSION}.tar.gz)
set(OGG_VERSION 1.3.5)
set(OGG_VERSION 1.3.4)
set(OGG_URI http://downloads.xiph.org/releases/ogg/libogg-${OGG_VERSION}.tar.gz)
set(OGG_HASH 0eb4b4b9420a0f51db142ba3f9c64b333f826532dc0f48c6410ae51f4799b664)
set(OGG_HASH fe5670640bd49e828d64d2879c31cb4dde9758681bb664f9bdbf159a01b0c76e)
set(OGG_HASH_TYPE SHA256)
set(OGG_FILE libogg-${OGG_VERSION}.tar.gz)
set(VORBIS_VERSION 1.3.7)
set(VORBIS_VERSION 1.3.6)
set(VORBIS_URI http://downloads.xiph.org/releases/vorbis/libvorbis-${VORBIS_VERSION}.tar.gz)
set(VORBIS_HASH 0e982409a9c3fc82ee06e08205b1355e5c6aa4c36bca58146ef399621b0ce5ab)
set(VORBIS_HASH 6ed40e0241089a42c48604dc00e362beee00036af2d8b3f46338031c9e0351cb)
set(VORBIS_HASH_TYPE SHA256)
set(VORBIS_FILE libvorbis-${VORBIS_VERSION}.tar.gz)
@@ -257,15 +253,15 @@ set(THEORA_HASH b6ae1ee2fa3d42ac489287d3ec34c5885730b1296f0801ae577a35193d3affbc
set(THEORA_HASH_TYPE SHA256)
set(THEORA_FILE libtheora-${THEORA_VERSION}.tar.bz2)
set(FLAC_VERSION 1.3.4)
set(FLAC_VERSION 1.3.3)
set(FLAC_URI http://downloads.xiph.org/releases/flac/flac-${FLAC_VERSION}.tar.xz)
set(FLAC_HASH 8ff0607e75a322dd7cd6ec48f4f225471404ae2730d0ea945127b1355155e737 )
set(FLAC_HASH 213e82bd716c9de6db2f98bcadbc4c24c7e2efe8c75939a1a84e28539c4e1748)
set(FLAC_HASH_TYPE SHA256)
set(FLAC_FILE flac-${FLAC_VERSION}.tar.xz)
set(VPX_VERSION 1.11.0)
set(VPX_VERSION 1.8.2)
set(VPX_URI https://github.com/webmproject/libvpx/archive/v${VPX_VERSION}/libvpx-v${VPX_VERSION}.tar.gz)
set(VPX_HASH 965e51c91ad9851e2337aebcc0f517440c637c506f3a03948062e3d5ea129a83)
set(VPX_HASH 8735d9fcd1a781ae6917f28f239a8aa358ce4864ba113ea18af4bb2dc8b474ac)
set(VPX_HASH_TYPE SHA256)
set(VPX_FILE libvpx-v${VPX_VERSION}.tar.gz)
@@ -275,9 +271,9 @@ set(OPUS_HASH 65b58e1e25b2a114157014736a3d9dfeaad8d41be1c8179866f144a2fb44ff9d)
set(OPUS_HASH_TYPE SHA256)
set(OPUS_FILE opus-${OPUS_VERSION}.tar.gz)
set(X264_VERSION 35fe20d1ba49918ec739a5b068c208ca82f977f7)
set(X264_VERSION 33f9e1474613f59392be5ab6a7e7abf60fa63622)
set(X264_URI https://code.videolan.org/videolan/x264/-/archive/${X264_VERSION}/x264-${X264_VERSION}.tar.gz)
set(X264_HASH bb4f7da03936b5a030ed5827133b58eb3f701d7e5dce32cca4ba6df93797d42e)
set(X264_HASH 5456450ee1ae02cd2328be3157367a232a0ab73315e8c8f80dab80469524f525)
set(X264_HASH_TYPE SHA256)
set(X264_FILE x264-${X264_VERSION}.tar.gz)
@@ -287,22 +283,22 @@ set(XVIDCORE_HASH abbdcbd39555691dd1c9b4d08f0a031376a3b211652c0d8b3b8aa9be1303ce
set(XVIDCORE_HASH_TYPE SHA256)
set(XVIDCORE_FILE xvidcore-${XVIDCORE_VERSION}.tar.gz)
set(OPENJPEG_VERSION 2.4.0)
set(OPENJPEG_SHORT_VERSION 2.4)
set(OPENJPEG_VERSION 2.3.1)
set(OPENJPEG_SHORT_VERSION 2.3)
set(OPENJPEG_URI https://github.com/uclouvain/openjpeg/archive/v${OPENJPEG_VERSION}.tar.gz)
set(OPENJPEG_HASH 8702ba68b442657f11aaeb2b338443ca8d5fb95b0d845757968a7be31ef7f16d)
set(OPENJPEG_HASH 63f5a4713ecafc86de51bfad89cc07bb788e9bba24ebbf0c4ca637621aadb6a9)
set(OPENJPEG_HASH_TYPE SHA256)
set(OPENJPEG_FILE openjpeg-v${OPENJPEG_VERSION}.tar.gz)
set(FFMPEG_VERSION 5.0)
set(FFMPEG_VERSION 4.4)
set(FFMPEG_URI http://ffmpeg.org/releases/ffmpeg-${FFMPEG_VERSION}.tar.bz2)
set(FFMPEG_HASH c0130b8db2c763430fd1c6905288d61bc44ee0548ad5fcd2dfd650b88432bed9)
set(FFMPEG_HASH 42093549751b582cf0f338a21a3664f52e0a9fbe0d238d3c992005e493607d0e)
set(FFMPEG_HASH_TYPE SHA256)
set(FFMPEG_FILE ffmpeg-${FFMPEG_VERSION}.tar.bz2)
set(FFTW_VERSION 3.3.10)
set(FFTW_VERSION 3.3.8)
set(FFTW_URI http://www.fftw.org/fftw-${FFTW_VERSION}.tar.gz)
set(FFTW_HASH 8ccbf6a5ea78a16dbc3e1306e234cc5c)
set(FFTW_HASH 8aac833c943d8e90d51b697b27d4384d)
set(FFTW_HASH_TYPE MD5)
set(FFTW_FILE fftw-${FFTW_VERSION}.tar.gz)
@@ -318,9 +314,9 @@ set(SNDFILE_HASH 646b5f98ce89ac60cdb060fcd398247c)
set(SNDFILE_HASH_TYPE MD5)
set(SNDFILE_FILE libsndfile-${SNDFILE_VERSION}.tar.gz)
set(WEBP_VERSION 1.2.2)
set(WEBP_VERSION 0.6.1)
set(WEBP_URI https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-${WEBP_VERSION}.tar.gz)
set(WEBP_HASH b5e2e414a8adee4c25fe56b18dd9c549)
set(WEBP_HASH b49ce9c3e3e9acae4d91bca44bb85a72)
set(WEBP_HASH_TYPE MD5)
set(WEBP_FILE libwebp-${WEBP_VERSION}.tar.gz)
@@ -355,15 +351,9 @@ set(YAMLCPP_HASH b45bf1089a382e81f6b661062c10d0c2)
set(YAMLCPP_HASH_TYPE MD5)
set(YAMLCPP_FILE yaml-cpp-${YAMLCPP_VERSION}.tar.gz)
set(PYSTRING_VERSION v1.1.3)
set(PYSTRING_URI https://codeload.github.com/imageworks/pystring/tar.gz/refs/tags/${PYSTRING_VERSION})
set(PYSTRING_HASH f2c68786b359f5e4e62bed53bc4fb86d)
set(PYSTRING_HASH_TYPE MD5)
set(PYSTRING_FILE pystring-${PYSTRING_VERSION}.tar.gz)
set(EXPAT_VERSION 2_4_4)
set(EXPAT_VERSION 2_2_10)
set(EXPAT_URI https://github.com/libexpat/libexpat/archive/R_${EXPAT_VERSION}.tar.gz)
set(EXPAT_HASH 2d3e81dee94b452369dc6394ff0f8f98)
set(EXPAT_HASH 7ca5f09959fcb9a57618368deb627b9f)
set(EXPAT_HASH_TYPE MD5)
set(EXPAT_FILE libexpat-${EXPAT_VERSION}.tar.gz)
@@ -428,21 +418,22 @@ set(SQLITE_HASH fb558c49ee21a837713c4f1e7e413309aabdd9c7)
set(SQLITE_HASH_TYPE SHA1)
set(SQLITE_FILE sqlite-src-3240000.zip)
set(EMBREE_VERSION 3.13.3)
set(EMBREE_VERSION 3.10.0)
set(EMBREE_URI https://github.com/embree/embree/archive/v${EMBREE_VERSION}.zip)
set(EMBREE_HASH f62766ba54e48a2f327c3a22596e7133)
set(EMBREE_HASH 4bbe29e7eaa46417efc75fc5f1e8eb87)
set(EMBREE_HASH_TYPE MD5)
set(EMBREE_FILE embree-v${EMBREE_VERSION}.zip)
set(EMBREE_ARM_GIT https://github.com/brechtvl/embree.git)
set(USD_VERSION 22.03)
set(USD_VERSION 21.02)
set(USD_URI https://github.com/PixarAnimationStudios/USD/archive/v${USD_VERSION}.tar.gz)
set(USD_HASH e0e441a05057692a83124a1195b09eed)
set(USD_HASH 1dd1e2092d085ed393c1f7c450a4155a)
set(USD_HASH_TYPE MD5)
set(USD_FILE usd-v${USD_VERSION}.tar.gz)
set(OIDN_VERSION 1.4.3)
set(OIDN_VERSION 1.4.1)
set(OIDN_URI https://github.com/OpenImageDenoise/oidn/releases/download/v${OIDN_VERSION}/oidn-${OIDN_VERSION}.src.tar.gz)
set(OIDN_HASH 027093eaf5e8b4e45835b991137b38e6)
set(OIDN_HASH df4007b0ab93b1c41cdf223b075d01c0)
set(OIDN_HASH_TYPE MD5)
set(OIDN_FILE oidn-${OIDN_VERSION}.src.tar.gz)
@@ -464,9 +455,9 @@ set(NASM_HASH aded8b796c996a486a56e0515c83e414116decc3b184d88043480b32eb0a8589)
set(NASM_HASH_TYPE SHA256)
set(NASM_FILE nasm-${NASM_VERSION}.tar.gz)
set(XR_OPENXR_SDK_VERSION 1.0.22)
set(XR_OPENXR_SDK_VERSION 1.0.17)
set(XR_OPENXR_SDK_URI https://github.com/KhronosGroup/OpenXR-SDK/archive/release-${XR_OPENXR_SDK_VERSION}.tar.gz)
set(XR_OPENXR_SDK_HASH a2623ebab3d0b340bc16311b14f02075)
set(XR_OPENXR_SDK_HASH bf0fd8828837edff01047474e90013e1)
set(XR_OPENXR_SDK_HASH_TYPE MD5)
set(XR_OPENXR_SDK_FILE OpenXR-SDK-${XR_OPENXR_SDK_VERSION}.tar.gz)
@@ -476,15 +467,15 @@ set(WL_PROTOCOLS_URI https://gitlab.freedesktop.org/wayland/wayland-protocols/-/
set(WL_PROTOCOLS_HASH af5ca07e13517cdbab33504492cef54a)
set(WL_PROTOCOLS_HASH_TYPE MD5)
set(ISPC_VERSION v1.17.0)
set(ISPC_VERSION v1.16.0)
set(ISPC_URI https://github.com/ispc/ispc/archive/${ISPC_VERSION}.tar.gz)
set(ISPC_HASH 4f476a3109332a77fe839a9014c60ca9)
set(ISPC_HASH 2e3abedbc0ea9aaec17d6562c632454d)
set(ISPC_HASH_TYPE MD5)
set(ISPC_FILE ispc-${ISPC_VERSION}.tar.gz)
set(GMP_VERSION 6.2.1)
set(GMP_VERSION 6.2.0)
set(GMP_URI https://gmplib.org/download/gmp/gmp-${GMP_VERSION}.tar.xz)
set(GMP_HASH 0b82665c4a92fd2ade7440c13fcaa42b)
set(GMP_HASH a325e3f09e6d91e62101e59f9bda3ec1)
set(GMP_HASH_TYPE MD5)
set(GMP_FILE gmp-${GMP_VERSION}.tar.xz)
@@ -508,15 +499,3 @@ set(ZSTD_FILE zstd-${ZSTD_VERSION}.tar.gz)
set(SSE2NEON_GIT https://github.com/DLTcollab/sse2neon.git)
set(SSE2NEON_GIT_HASH fe5ff00bb8d19b327714a3c290f3e2ce81ba3525)
set(BROTLI_VERSION v1.0.9)
set(BROTLI_URI https://github.com/google/brotli/archive/refs/tags/${BROTLI_VERSION}.tar.gz)
set(BROTLI_HASH f9e8d81d0405ba66d181529af42a3354f838c939095ff99930da6aa9cdf6fe46)
set(BROTLI_HASH_TYPE SHA256)
set(BROTLI_FILE brotli-${BROTLI_VERSION}.tar.gz)
set(LEVEL_ZERO_VERSION v1.7.15)
set(LEVEL_ZERO_URI https://github.com/oneapi-src/level-zero/archive/refs/tags/${LEVEL_ZERO_VERSION}.tar.gz)
set(LEVEL_ZERO_HASH c39bb05a8e5898aa6c444e1704105b93d3f1888b9c333f8e7e73825ffbfb2617)
set(LEVEL_ZERO_HASH_TYPE SHA256)
set(LEVEL_ZERO_FILE level-zero-${LEVEL_ZERO_VERSION}.tar.gz)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_vorbis
URL file://${PACKAGE_DIR}/${VORBIS_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_wayland_protocols
URL file://${PACKAGE_DIR}/${WL_PROTOCOLS_FILE}

View File

@@ -1,18 +1,28 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
# Note the utility apps may use png/tiff/gif system libraries, but the
# library itself does not depend on them, so should give no problems.
set(WEBP_EXTRA_ARGS
-DWEBP_BUILD_ANIM_UTILS=OFF
-DWEBP_BUILD_CWEBP=OFF
-DWEBP_BUILD_DWEBP=OFF
-DWEBP_BUILD_GIF2WEBP=OFF
-DWEBP_BUILD_IMG2WEBP=OFF
-DWEBP_BUILD_VWEBP=OFF
-DWEBP_BUILD_WEBPINFO=OFF
-DWEBP_BUILD_WEBPMUX=OFF
-DWEBP_BUILD_EXTRAS=OFF
-DWEBP_HAVE_SSE2=ON
-DWEBP_HAVE_SSE41=OFF
-DWEBP_HAVE_AVX2=OFF
)
if(WIN32)

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
set(X264_EXTRA_ARGS --enable-win32thread --cross-prefix=${MINGW_HOST}- --host=${MINGW_HOST})

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_xml2
URL file://${PACKAGE_DIR}/${XML2_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
# Keep flags in sync with install_deps.sh ones in compile_XR_OpenXR_SDK()

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
if(WIN32)
set(XVIDCORE_EXTRA_ARGS --host=${MINGW_HOST})

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(YAMLCPP_EXTRA_ARGS
-DYAML_CPP_BUILD_TESTS=OFF

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_zlib
URL file://${PACKAGE_DIR}/${ZLIB_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
ExternalProject_Add(external_zlib_mingw
URL file://${PACKAGE_DIR}/${ZLIB_FILE}

View File

@@ -1,4 +1,20 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
set(ZSTD_EXTRA_ARGS
-DZSTD_BUILD_PROGRAMS=OFF

File diff suppressed because it is too large Load Diff

View File

@@ -1,6 +1,3 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright 2016 Blender Foundation.
# - Find BLOSC library
# Find the native BLOSC includes and library
# This module defines
@@ -14,6 +11,17 @@
# also defined, but not for general use are
# BLOSC_LIBRARY, where to find the BLOSC library.
#=============================================================================
# Copyright 2016 Blender Foundation.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# If BLOSC_ROOT_DIR was defined in the environment, use it.
IF(NOT BLOSC_ROOT_DIR AND NOT $ENV{BLOSC_ROOT_DIR} STREQUAL "")
SET(BLOSC_ROOT_DIR $ENV{BLOSC_ROOT_DIR})

View File

@@ -1,6 +1,3 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright 2016 Blender Foundation.
# - Find CPPUNIT library
# Find the native CPPUNIT includes and library
# This module defines
@@ -14,6 +11,17 @@
# also defined, but not for general use are
# CPPUNIT_LIBRARY, where to find the CPPUNIT library.
#=============================================================================
# Copyright 2016 Blender Foundation.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# If CPPUNIT_ROOT_DIR was defined in the environment, use it.
IF(NOT CPPUNIT_ROOT_DIR AND NOT $ENV{CPPUNIT_ROOT_DIR} STREQUAL "")
SET(CPPUNIT_ROOT_DIR $ENV{CPPUNIT_ROOT_DIR})

View File

@@ -1,5 +1,3 @@
# SPDX-License-Identifier: BSD-3-Clause
# Module to find IlmBase
#
# This module will first look into the directories defined by the variables:

View File

@@ -1,6 +1,3 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright 2016 Blender Foundation.
# - Find LOGC4PLUS library
# Find the native LOGC4PLUS includes and library
# This module defines
@@ -14,6 +11,17 @@
# also defined, but not for general use are
# LOGC4PLUS_LIBRARY, where to find the LOGC4PLUS library.
#=============================================================================
# Copyright 2016 Blender Foundation.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# If LOGC4PLUS_ROOT_DIR was defined in the environment, use it.
IF(NOT LOGC4PLUS_ROOT_DIR AND NOT $ENV{LOGC4PLUS_ROOT_DIR} STREQUAL "")
SET(LOGC4PLUS_ROOT_DIR $ENV{LOGC4PLUS_ROOT_DIR})

View File

@@ -1,5 +1,3 @@
# SPDX-License-Identifier: BSD-3-Clause
# Module to find OpenEXR.
#
# This module will first look into the directories defined by the variables:

Some files were not shown because too many files have changed in this diff Show More