the user data in lineart_identify_loose_edges should be the `tls` one
rather than the plain `userdata`.
This will lead to incorrect address being accessed. Fixed now.
Add missing check as the context override dict may have been copied
since it was assigned, also initialize the context manager with
PyType_Ready, while it didn't cause any errors - it's expected
that all types are initialized.
Aggressive needs to be enabled for many useful edits to take effect,
the ignore list is currently used to disable edits that may need
further checks/investigation before they're enabled.
Note that aggressive was already enabled for the:
source/tools/utils/autopep8_clean.py script which was previously used
when applying autopep8.
Failure to clip automatic-names meant named could end with a "." for e.g.
Error in [0] meant the clipped text was copied then
immediately overwritten.
[0]: 354e6b9c18
- De-duplicate txt_new_linen & txt_new_line.
- Don't accept NULL as input for txt_new_linen & txt_new_line
(callers can pass in an empty string instead).
- Avoid duplicate strlen calls in txt_new_linen.
- Use memcpy when the length of the string is known in txt_delete_sel &
BKE_text_load_ex.
`attribute_try_create` didn't understand that the vertex group
attribute already existed because it only looks for names in custom
data layers when the domain matches. Using `attribute_exists`
unfortunately requires another loop through all attribute names,
but that should be optimized separately in the future anyway.
Differential Revision: https://developer.blender.org/D14756
Added a fallback path to compute the
cursor radius for when the stroke
starts over a blank area of space
(in which case SCULPT_cursor_geometry_update
fails).
This commit makes the `MeshVertex.normal` property read-only.
In practice it already was, since the value could be overwritten at any
time if code requests updated normals, so this just clarifies that
position and avoids misleading users.
Differential Revision: https://developer.blender.org/D14696
auto-iteration property in mask filter
Note: Auto-iteration is still set manually
for increase/decrease contrast. These should
probably become their own operators.
by showing redo panel.
The A hotkey has "auto iteration" enabled by default,
which calculates the number of times to run the filter
using a heuristic based on vertex count.
To make clear to the user what is going on the redo
panel is now shown for the mask filter operator.
NOTE: I discovered the source of the bug where sculpt
operators' redo panels were greyed out. The name
fed to SCULPT_undo_push_begin must match the operator
name. I've added a comment in sculpt_intern explaining
this.
Remembering the number of curves of every type makes it fast to know
whether processing specific to a single curve type has to be done.
This information was accessed in quite a few places, so this should be
an overall reduction in overhead for the new curves type.
The cache is computed eagerly, in other words every time after changing
the curve types. In order to reduce verbosity I added helper functions
for some common ways to set the types.
Differential Revision: https://developer.blender.org/D14732
Changes:
- Remove `BLI_memarena` (Use `MEM_cnew` and `MEM_delete` to allocate cached data)
- Implement `snap_object_data_mesh_free_ensure` and `snap_object_data_editmesh_free_ensure` and skip need to get original key Object for editmesh data
- Use `BMEditMesh` as key for editmesh `Ghash`
- Make a better distinction between `SnapObjectData`s. (`SnapData_Mesh` and `SnapData_EditMesh`)
The editing data of a `SURF`s is similar to that of Curves and should be supported for snapping.
But unlike Curve objects, for snapping, only support the nurb points if the object is in edit mode.
This matches the solution for Meshes and avoids having to create a kind
of "boundbox" for the SURF nurb points.
* Adjust width based on node width, necessary to make the longer name below work.
* Show "X Named Attributes" in the overlay.
* Use "Accessed named attributes" in the tooltip.
Differential Revision: https://developer.blender.org/D14751
* If removing an attribute failed (even though it exists), don't log it as being used.
* Make warning message a bit more informative.
Differential Revision: https://developer.blender.org/D14750
View moves faster with two active directions.
This is probably because `dvec` is not normalized when moving in two directions.
Normalizing this direction vector will fix the problem.
Differential Revision: https://developer.blender.org/D14729
Since cbf033c055 the `matte_id` will be allocated in the node
storage for the forward compatibility purposes. However, this
field was never freed, leading to memory leak.
Causes annoying popup on macOS when running Cycles tests,
for example render_passes_cryptomatte_asset.blend
Differential Revision: https://developer.blender.org/D14728
Add Bake Action to the NLA edit menu to aid discoverablity and allow
people to understand that Bake Action is part of working with the NLA.
Part of the NLA road map improvement project for the Animation Module.
This was a community request to add access to the Bake without needing
to turn on developer tools in the preferences and then use search in the
NLA for bake.
It seems this was always intended, as the operator is called `nla.bake`.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14575
- Add missing doxy-section for Apply Parent Inverse Operator
- Use identity for None comparison in Python.
- Remove newline from operator doc-strings.
- Use '*' prefix multi-line C comment blocks.
- Separate filenames from doc-strings.
- Remove break after return.
While the ability to run `autopep8 .` to format Blender's Python code
is handy, the settings to perform this can conflict with other uses
of autopep8 (which editors may use to auto-format on save).
Some arguments now need to be passed in, e.g:
autopep8 . --in-place --recursive --jobs=0
We'll likely include this in `make format` convenience target so the
details for invoking autopep8 shouldn't be an issue in the long term.
The current code for computing tangents is not exactly fast.
This has been a long-standing issue, and recently came up again with T97378.
The main bottleneck is fetching the mesh data, since it's handled through a callback system and each vertex might have its data queried dozens of times.
I've tried a lot of things to optimize `mikktspace.c`, but unfortunately most weren't that useful:
- Vectorizing SVec3 gives a ~5% speedup, but I'm not sure if the additional ~70 lines of code are worth it
- Keeping an internal copy of the data instead of re-querying all the time helps a lot (~50-60% time reduction), but requires a lot of extra memory (~100 byte per face)
- Going C++ and replacing the internal quicksort with std::sort shows no difference
- Restructuring the entire file to be a header-only library so that the callbacks can be inlined gives ~10% reduction, but is a major change and deviation from the original library
In the end, two simple fixes that actually help remain:
- Don't re-query the number of faces in each loop iteration
- Don't bother looking for identical vertices if there's only one vertex with that hash
With this, time for the test case in T97378 goes from 6.64sec to 4.92sec. It's something I guess.
I feel like completely refactoring this library would not be a bad idea at some point, but for now it does the job...
Differential Revision: https://developer.blender.org/D14675
The uv fix just submitted had a bug where I forgot to wrap around
after adding 1. This apparently worked anyway in a debug build
but not in release build, hence the buildbot tests were failing.
Works for both Cycles and multires bake. Triangles are baked to multiple
UDIM images if they span across them, though such UV layouts are generally
discouraged as there is no filtering across UDIM tiles.
The bake margin currently only works within UDIM tiles. For the extend method
this is logical, for the adjacent faces method it may be useful to support
copying pixels from other UDIM tiles, though this seems somewhat complicated.
Fixes T95190
Ref T72390
Remove need for shadow caustic caster geometry to have a UV layout. UVs were
useful to maintain a consistent tangent frame across the surface while
performing the walk. A consistent tangent frame is necessary for rough
surfaces where a normal offset encodes the sampled h, which should point
towards the same direction across the mesh.
In order to get a continuous surface parametrization without UVs, the
technique described in this paper was implemented:
"The Natural-Constraint Representation of the Path Space for Efficient
Light Transport Simulation" (Supplementary Material), SIGGRAPH 2014.
In addition to implementing this feature:
* Shadow caustic casters without smooth normals are now ignored (triggered
some refactoring and cleaning).
* Hit point calculation was refactored using existing utils functions,
simplifying the code.
* The max number of solver iterations was reduced to 32, a solution is
usually found by then.
* Added generalized geometry term clamping (transfer matrix calculation can
sometimes get unstable).
* Add stop condition to Newton solver for more consistent CPU and GPU result.
* Add support for multi scatter GGX refraction.
Fixes T96990, T96991
Ref T94120
Differential Revision: https://developer.blender.org/D14623
This is fairly tricky to perform, since there is often very limited
contextual information available about the 'active' hierarchy to
override.
This commit is a first step, it is expected to handle decently well
cases like objects and obdata (recreating necessary object and
collection hierarchy, and/or hooking it to a potential existing
hierarchy), at least in most common cases.
Ref: {T95707}.
Extends the changes started in f31c3f8114 to completely separate
much of the DRW curves code from the particle hair drawing. In the short
term this increases duplication, but the idea is to simplify development
by making it easier to do larger changes to the new code, and the new
system will replace the particle hair at some point.
After this, only the shaders themselves are shared.
Differential Revision: https://developer.blender.org/D14699
Add macros to get/set boolean attributes, to set float2/float3
attributes and to get float2/float3 attributes via pointer access.
Needed for D14365 and further generic attribute integration.
Differential Revision: https://developer.blender.org/D14708
This substantially redoes the logic by which bevel chooses, for
the middle segment when there are an odd number of segments,
which face to interpolate in, and which vertices to snap to which
edges before doing that interpolation. It changes the UV layouts
of a number of the regression tests, for the better.
An example, in the reference bug, is a cube with all seams, unwrapped
and then packed with some margin around them, now looks much
better in UV space when there are an odd number of segments.
The original mistake I made in b9febb54a4 was thinking
that the input curve object data to `BKE_displist_make_curveTypes`
was already copied from the original. I think I misread some of its
`ID` flags. This commit places the result of curves evaluation in a
duplicated curve instead, and copies the edit mode pointers
necessary for drawing overlays. `Curve` needs to know not to
free those pointers.
I still don't have a full understanding of why some of the tactics I've
used work and others don't. I've probably tried around 8 different
solutions at this point, and this is the best I came up with.
The dependency graph seems to have some handling of edit mode
pointers that make the edit mode overlays work if the evaluated
result is only an empty curve created by the evaluated geometry set.
This doesn't work with the current method and I need to set the
edit mode pointers at the end of evaluation explicitly.
We're constrained by the confusing duality of the old curves system
combined with the new design using the evaluated geometry set.
Older areas of Blender expect the evaluated `Curve` to be a copy
of the original, even if it was replaced by some arbitrary evaluated mesh.
Differential Revision: https://developer.blender.org/D14561
Added some regex magic in i18n py module to also extract UI names from
all of our units definitions.
Those enum values are fully dynamically generated, so they cannot be
extracted from RNA introspection.
Caused by {rBcfa53e0fbeed}
Above commit mixed up source and destination meshes causing bad lookups
on calculated normals.
Now make sure we get normals from our destination mesh to project along.
Note this was only reported for Projected Face Interpolated mode, but
same was true for Projected Edge Interpolated mode (though that one is a
bit weird to test since I think there is generally something wrong with
that mode -- with or without rBcfa53e0fbeed).
Fixes T97528
Maniphest Tasks: T97528
Differential Revision: https://developer.blender.org/D14726
When in mesh editmode, attributes point to bmesh customdata, the
attribute data is empty since custom data is stored per element instead
of a single array there (same es UVs etc.).
Opposed to e.g. UVs, general attributes were not setting their data
length/size to zero in case of editmode though, which could lead to
- crash in Outliner Data Api view [that was reported in T95922]
- RuntimeError such as the following:
```
RuntimeError: bpy_prop_collection[index]: internal error, valid index 0
given in 8 sized collection, but value not found
```
Now check for mesh editmode in `BKE_id_attribute_data_length` (and
return zero in that case).
Alternatively, the check could also be done in
`rna_Attribute_data_length` only (such as UVs do in
`rna_MeshUVLoopLayer_data_length`).
Ref D11998
Fixes T95922
Maniphest Tasks: T95922
Differential Revision: https://developer.blender.org/D14714
Regression in 4d0f846b93,
passing selection through to drag relied on tweak events running
even when the press event was handled which is not the case for drag.
Fix for T84962
Before the patch, edit voxel size always displayed voxel size without units, just as a number in meters.
Now it changes like in the voxel remesh panel and shows correct units
Video:
{F13009428}
In adaptive mode:
{F13009435}
Reviewed By: JulienKaspar
Maniphest Tasks: T84962
Differential Revision: https://developer.blender.org/D14682
This adds pyproject.toml, needed to configure defaults for autopep8.
The file is auto-discovered in a similar way to .clang-format, other
tools could be configured here too. For now just configure autopep8 so
this can be enabled in IDE's without causing unexpected edits such as
wrapping lines over 80 columns in width.
Now autopep8 can be used from the root directory by running: autopep8 .
This uses multiple-jobs to run autopep8 over all Python scripts except
paths that are explicitly ignored in exclude defined by pyproject.toml.
Reviewed By: mont29, brecht, sybren
Ref D14686
This enables building of HIP binaries for AMD RDNA and RDNA2 GPUs.
This requires the 22.10 / ROCm 5.1 driver.
Ref T91571
Differential Revision: https://developer.blender.org/D14360
If the attribute already existed, but had a different domain or data type
than the user tried to write to it with (i.e. writing to `position` with
a float), then the data from field evaluation wasn't freed.
This restructures the geometry nodes modifier attribute writing process
to solve that problem and remove some of the nested if statements
that made the process confusing.
One case that still doesn't work is writing to a builtin attribute from
a different domain. If `OutputAttribute` gets that feature then that
could be supported here too.
Differential Revision: https://developer.blender.org/D14706
The problem is old.
rB52be06301257 (fixed by rB4b35d6950d4f) just masked it.
`Object->data`, on evaluated objects, is not a safe pointer to get
objects with the same `BMEditData`.
Use `Object->runtime.data_orig` instead.
As `GPU_PRIM_LINE_LOOP` is not supported on Vulkan or Metal and
`GPU_PRIM_TRI_FAN` is not supported on Metal, they will be removed in
future releases.
So it is important to inform users that they are obsolete and may not
be supported for a long time.
Release Notes: https://wiki.blender.org/wiki/Reference/Release_Notes/3.2/Python_API
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14679
Property collection functions were not really in sync which could result
in crashes in UI_LISTS.
The reason is that attributes of type color defined on domains other than
Points or Corners are still valid, but should really be skipped for the
special "color_attributes".
`rna_AttributeGroup_color_length` itself was fine here, it skips these,
but the iterator (`rna_AttributeGroup_color_iterator_begin` /
`rna_Attributes_noncolor_layer_skip`) wasnt, so when a UI_LIST
filter_items() would iterate the collection it would actually get
results were it shouldnt.
Now check a suiting domain in `rna_Attributes_noncolor_layer_skip` as
well.
Maniphest Tasks: T97502
Differential Revision: https://developer.blender.org/D14717
Since {rBeae36be372a6b16ee3e76eff0485a47da4f3c230} the distinction
between float and byte colors is more explicit in the ui. So far, geometry
nodes couldn't really deal with byte colors in general. This patch fixes that.
There is still only one color socket, which contains float colors. Conversion
to and from byte colors is done when read from or writing to attributes.
* Support writing to byte color attributes in Store Named Attribute node.
* Support converting to/from byte color in attribute conversion operator.
* Support propagating byte color attributes.
* Add all the implicit conversions from byte colors to the other types.
* Display byte colors as integers in spreadsheet.
Differential Revision: https://developer.blender.org/D14705
This adds a new subpanel to the geometry nodes modifier which is just
used to display information about used attributes.
* A new panel is used because adding this information anywhere else
clutters the ui too much imo.
* The general layout is similar to that in the tooltip. I found it to be more
trouble than it's worth to share this code.
Possible future improvements:
* Don't show the panel if there are no used named attributes.
* Add some heuristics to determine which named attributes the user does
not have to care about because they are only used in the node group
and don't affect anything else.
Differential Revision: https://developer.blender.org/D14701
Very easy fix, the bug seemed to be a result of a typo on the right-most margin.
Old: {F13013777}
New: {F13013782}
Maniphest Tasks: T97497
Differential Revision: https://developer.blender.org/D14711
This was projecting the unnormalized z scale axis onto the plane defined
by the view vector. If object scale was very small, this made the empty
still visible at viewing angles far from the object axis.
Now use the normalized z scale axis to make this work the same at all
object scales.
Fixes T97004.
Maniphest Tasks: T97004
Differential Revision: https://developer.blender.org/D14557
This was possible with the gizmo, but no using the operator (e.g. from
the sidebar).
Now store original offsets and reset to these on calcel (ESC or RMB).
Maniphest Tasks: T97465
Differential Revision: https://developer.blender.org/D14704
Text inserted via TEXT_OT_insert would always have auto-close
logic applies which interfered any insertion of literal strings
containing brackets.
Now auto-closing brackets is restricted to characters read from
events from the operators invoke functions.
Sculpt paint tools now pop up an error message if
dynamic topology or multires are enabled.
Implementation notes:
* SCULPT_vertex_colors_poll is now a static function in sculpt_ops.c.
It is now used solely by the legacy color attribute conversion
operators (SCULPT_OT_vertex_to_loop_colors and SCULPT_OT_loop_to_vertex_colors)
and should be deleted when they are.
* There is a new method, SCULPT_handles_colors_report, that returns true if
the sculpt session can handle color attributes; otherwise it returns false
and displays an error message to the user.
- Verrtex paint mode has been refactored into C++ templates.
It now works with both byte and float colors and point
& corner attribute domains.
- There is a new API for mixing colors (also based
on C++ templates). Unlike the existing APIs byte
and float colors are interpolated identically.
Interpolation does happen in a squared rgb space,
this may be changed in the future.
- Vertex paint now uses the sculpt undo system.
Reviewed By: Brecht Van Lommel.
Differential Revision: https://developer.blender.org/D14179
Ref D14179
Python 3.10 has added "soft keywords" [0] to their list of identifiers.
This patch adds these soft keywords to the list of builtin functions
that the text editor searches for when highlighting Python code.
The only soft keywords that Python 3.10 current has are: `match`,
`case`, and `_`, but more will likely be added in future versions.
Currently, the `_` soft keyword is ignored from highlighting. It is a
wildcard matching pattern when used with `case` (similar to `default`
for `switch`es in C/C++), but `_` is far more often used in other
contexts where highlighting the `_` might seem strange. For example,
ignoring elements when unpacking tuples (`_, g, _, a = color`).
This patch also updates the commented Python code for creating the list
of keywords, for convenience.
Before:
{F13012878}
After:
{F13012880}
Example from PEP-636 [1]
Note: These soft keywords are only reserved under specific contexts.
However, in order for the text editor to know when the keywords are used
in the appropriate contexts, the text editor would need a full-blown
Python grammar [2] parser. So, for now, these keywords are simply added
in along with the other keywords in order to highlight them in the text
editor.
[0]: https://docs.python.org/3/reference/lexical_analysis.html#soft-keywords
[1]: https://peps.python.org/pep-0636/#matching-specific-values
[2]: https://docs.python.org/3/reference/grammar.html
Ref D14707
Currently the "exclude" option for autopep8 isn't as reliable as it
should be since passing in absolute paths to autopep8 causes
the paths not to match. See: D14686 for details.
So explicitly disable autopep8 in this generated file (the generator
has already been updated).
Also use spaces for indentation otherwise autopep8 re-indents them.
This seems like a bug in autopep8 since it's changing lines with
autopep8 disabled. Use a workaround instead of looking into a fix since
it's simpler for all our Python files to use spaces instead of tabs and
there isn't much benefit mixing indentation for scripts.
Sometimes, when moving strip with 2 input effect attached and causing
strip overlap, this overlap is resolved incorrectly - too big offset
is applied. This is because effects are not taken into consideration
when "shuffeling" to resolve overlap.
To fix usual cases (transitions), overlap between strip and it's effect
is considered to be impossible.
There are edge cases, but these would be much more complicated to
implement and could have negative impact on performance.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D14578
Crash was caused by incorrectly assuming, that rendered strip is meta
when editing code in bulk, but this wasn't true and strip had no
channels initialized, which caused crash on NULL dereference.
Correct approach is to find list of channels where on same level as
rendered strip, similar to how `SEQ_get_seqbase_by_seq` function works
for list of strips.
This reverts commit 390b9f1305. It seems to
break things on Linux for unknown reasons, so leave it out for now. A solution
to this will be required for Vega cards though.
There is not much point in having those editable in overrides, and since
those are pointers, their value always differs from ref linked ID vs.
local override one, generating 'noise' in Outliner's override property
view.
Building against the existing 3.1 libraries should continue to work, until
the precompiled libraries are committed for all platforms.
* Enable WebP by default.
* Update Windows for new library file names.
* Automatically clear outdated CMake cache variables when upgrading to new
libraries.
* Fix static library linking order issues on Linux for OpenEXR and OpenVDB.
Implemented by Ray Molenkamp, Sybren Stüvel and Brecht Van Lommel.
Ref T95206
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
This vairable is no longer needed, was left as a hack for some
very rare situations in clipping and now those are replaced with
v->index (object) instead which has the same effect.
This part of the memory can then be used for other flags
reserved for shadow information.
It's better to use some local/stable identifiier to avoid relying on
the data not being freed in between creating the search menu and
the exec function. This is similar to c473b2ce8b.
029cf23d71 changed some icons alignment, but after 9be49a1069
the icons don't align anymore. This commit reverts 029cf23d71 and
also makes a couple of other outliner icons left aligned, instead of
right aligned, for consistency and general alignment.
Differential Revision: https://developer.blender.org/D14501
Add a check to the creation of node groups to remove hidden links
that are connected to the outside of the node group. This avoids
creating sockets in the group's interface that aren't (visibly)
connected to anything within the node group.
Reviewed By: Jacques Lucke, Hans Goudey
Differential Revision: https://developer.blender.org/D14249
This commit makes the dot grid used as background in the node editor
more visually stable when zooming in and out.
The dot grid now uses a continuously subdividing pattern, where
each level of subdivision divides the previous five times, similar to
the line grid in the 3D viewport.
The maximum for the "Grid Levels" theme setting is changed to 3, since
any further subdivisions are too small to be visible.
The "Grid Levels" value for the default themes "Blender Dark" and
"Blender Light" is therefore changed to 3, as well.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: http://developer.blender.org/D13302
- Metal uniform array compatibility in DRW module.
- Guard OpenGL-specific workarounds and flushes behind GPU_type_matches_ex API guard. Add further render boundaries for render paths called outside of the main loop.
Authored by Apple: Michael Parkin-White
Ref: T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14438
Skip validation when inserting items into the Win32 "Volumes" list.
This fixes some long hangs when launching Blender with disconnected
network shares.
See D14506 for more details.
Differential Revision: https://developer.blender.org/D14506
Reviewed by Brecht Van Lommel
MSL does not have an implicit global scope, this is emulated via macro's adding an indirection for uniforms, attributes, shader stage inputs and outputs such as:
#define roughness shaderinst->roughness.
Variables in GLSL which exist within uniform blocks can be directly referenced via the global scope, unlike standard C++. This means that variable name pollution occurs if subsequent local variables in the code use the same name, resulting in compilation errors.
A number of these conflicting names have been renamed to ensure unique naming and no further scope pollution.
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14452
Explicit constructor for mat3 from a mat4 is not valid and cannot be overloaded.
Adding explicit texture resource type flags for depth textures. This is an explicit requirement for Metal Shading language. This is a temporary compatibility, as this path is already supported in GPU_SHADER_CREATE_INFO under ImageType::DEPTH_2D, though required in shader source for MSL shaders which do not have create info.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14418
This commit re-implements the resample curve node to use the new curves
type instead of CurveEval. The largest changes come from the need to
keep track of offsets into the point attribute arrays, and the fact
that the attributes for all curves are stored in a flat array.
Another difference is that a bit more of the logic is handled by
building of the field network inputs. The idea is to let the field
evaluator handle potential optimizations while making the rest of the
code simpler.
When resampling 1 million small poly curves,the node is about 6
times faster compared to 3.1 on my hardware (500ms to 80ms).
This also adds support for Catmull Rom curve inputs.
Differential Revision: https://developer.blender.org/D14435
The crash happens because the origindex layers created as part of
the modifier stack evaluation are not set in the `MeshRenderData` when
they should have been.
This is because when selecting in X-ray mode, a subdivision wrapper
is created to ensure that selection happens with a subdivided
geometry, and this replaces the `MDATA` wrapper which is also used to
setup the `MeshRenderData`.
As we do not seemingly have an `MDATA` wrapper, the draw code decides
that we can extract draw buffers directly from the BMesh, instead of
the mapped Mesh with origin indices layers.
To fix this, we should also consider to use mapped extraction if a
subdivision wrapper exists on the mesh.
Differential Revision: https://developer.blender.org/D14485
This is because the inheritance is not done before checking if the shader
should be statically compiled. Also some inheritance scheme
might have intermediate permutation that are not compilable.
The recent change to allow a max segments of 1000 in the modifier
causes a lag when dragging or wheeling in the segments box.
This change makes the soft limit back to 100, but you can still
type numbers up to 1000 in the box.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14477
There were multiple issues at hand here:
- The default value has been changed to `{0, 0, 1}` see: rB25f1783673de636a6f0ca4457df8c05bc685981a
- The output needs the subtype set `PROP_DIRECTION`
- The noder properties were missing in `node_composit_set_butfunc`
Fixes T96860
This adds a new operator that converts all selected curves objects
into hair particle systems on their respective surface objects. Existing
particle systems with the correct name are updated, otherwise a new
particle system is added.
The purpose of the operator is the make the new curve sculpting tools
useful even before all functionality is ported over from the old hair system.
The operator can be found in the `Object > Convert` menu in object mode,
when a curves object is active.
Differential Revision: https://developer.blender.org/D14441
When a `GPencilUpdateCacheNode` is created, it always allocates the
`children` pointer. This should not be freed until the whole cache is
deleted.
The `cache_node_update` would free the `children` pointer in a specific
case, causing a double-free later when the cache was removed.
The current behaviour is to prevent multi-user data from having its
transformation applied.
However in some particular cases it is possible to apply them:
* If all the users of the multi-user data are part of the selection.
* If not all the users are in the selection but the selection is made
single-user.
The active object is used as reference to set the transformation of the
other selected objects.
Note: For simplicity sake, this new behaviour is only available if all
the selection is using the same data.
Differential Revision: https://developer.blender.org/D14377
The current behaviour is to prevent multi-user data from having its
modifier applied.
Instead, with this patch, we now warn the user that if they want to
proceed the object will be made single-user.
Note that this only makes the object data single-user. Not the material
or actions.
As a future step we can apply the same behaviour for the Grease Pencil modifiers
Differential Revision: https://developer.blender.org/D14381
While it's useful for click-drag to leave the selection as-is
(when clicking on items that are already selected), it's useful
for a single click to de-select all other elements.
This also removes the need for the initial selection to set the object
as active since this is possible by clicking on it.
Using the evaluated lengths cache from 72d25fa41d, re-implement
the curve parameter node with the new data structure. Conceptually
it works the same way, but the code is restructured and cleaned up
a bit as well. This also adds support for Catmull Rom curves.
Differential Revision: https://developer.blender.org/D14461
The idea that curves with two points cannot be cyclic came from some
existing code, but there's not fundamental reason for it, so remove the
check in this function. The case can be handled elsewhere if necessary.
This commit adds calculation of lengths along the curve for each
evaluated point. This is used for sampling, resampling, the "curve
parameter" node, and potentially more places in the future.
This commit also includes a utility for calculation of uniform samples
in blenlib. It can find evenlyspaced samples along a sequence of points
and use linear interpolation to move data from those points to the
samples. Making the utility more general aligns better with the more
functional approach of the new curves code and makes the behavior
available elsewhere.
A "color math" header is added to allow very basic interpolation
between two colors in the `blender::math` namespace.
Differential Revision: https://developer.blender.org/D14382
Fix small cosmetic issues with the reroute node:
1. Remove special case that allowed curved links to attach vertically.
2. Center align the reroute node's label.
The vertically attached node links could lead to kinks in the otherwise
smooth curves. This would break the visual flow and make the link
potentially intersect the node's label.
The center alignment of the label gives more consistent results for
different label lengths and also reduces the chance of the label
interfering with the node links.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: D14457
Don't always create a new geometry nodes node tree when adding a
geometry nodes modifier.
This avoids files getting cluttered with empty and unused geometry node
trees that are created every time a nodes modifier is added to an
object - even if only to apply an already existing.
This is also more consistent with other modifiers that also don't
automatically create new data blocks.
The new modifier still automatically gets populated with a new node
tree when adding it via the "New" button in the header of the
geometry nodes editor.
Reviewed By: Hans Goudey, Dalai Felinto, Pablo Vazquez
Differential Revision: D14458
Add new `BKE_id_is_editable` helper in `BKE_lib_id.h`, that supercedes
previous check (simple `ID_IS_LINKED()` macro) for many editing cases.
This allows to also take into account 'system override' (aka
non-editable override) case.
Ref: {T95707}.
'Delete' was a confusing name, even though it would delete the overrides
it would replace them by linked data.
Adding the 'single' version of that operation made it even more
confusing, since often it has to keep the override ID for sakes of
hierarchy, and just reset it and turn it back into a non-editable system
override.
Ref: {T95707}.
Implement default behavior to decide which overrides remain 'system'
ones, and which become 'user editable' ones, when creating hierarchy
override from 3DView or the Outliner.
3DView:
If from an Empty-instanced collection, only Armature objects in
that collection are user overrides.
If from a set of selected objects, all overrides created from selected
objects are user overrides.
Outliner:
All override IDs created from selected elements in the Outliner are user
overrides.
There is one special case: When a collection is selected, and is
'closed' in the outliner, all its inner armature objects are also user
overrides.
Ref: {T95707}.
When creating with hierarchies, core code only generates system
overrides, responsibility to define 'user overrides' is then for the
higher-level calling code (Editor/Operator-level).
do_version code uses fairly basic euristics, should be good enough here
though in most cases. and can always be refined later if needed.
Ref: {T95707}.
The whole liboverride data is still ignored by override diffing etc.,
but some of their flags should be editable (from script and/or advanced
technical/debug UI). So using a weird combination of flags to achieve
this.
Ref: {T95707}.
This merely adds the flag, exposes it in RMA, and uses it in some of the
most common 'is editable' checks (RNA, `BASE_EDITABLE` macro...).
Next step: do_version and defining systemoverrides at creation.
Ref: {T95707}.
The "dupli" system now has a faster, more powerful, and more flexible
alternative with geometry nodes. Since the point cloud objects haven't
been exposed in the non-experimental UI yet, we can remove the dupli
implementation and the panel for the object type.
Differential Revision: https://developer.blender.org/D14482
Adds fading support for build modifier so it's not a hard cut off
Reviewed By: Antonio Vazquez (antoniov), Matias Mendiola (mendio)
Differential Revision: https://developer.blender.org/D14309
The check for the selected status was missing in the case
where the stroke one has one point.
Differential Revision: http://developer.blender.org/D14490
Adds supports for collection previews that are rendered automatically when
collections are marked as assets. (Or when preview rendering is triggered
differently, e.g. through the //Refresh Data-Block Previews// operator).
Idea in this patch is to create a collection instance empty outside of main for
the collection, and then reuse the object rendering code to render the preview.
This keeps things very simple and works just fine.
Differential Revision: https://developer.blender.org/D14460
Reviewed by: Bastien Montagne
Error exposed by ba49345705. Code just assumed that the tree-element
pointed to a real ID, but this is often not the case, and the ID pointer
contains completely different data. E.g. before ba49345705, it would
be a pointer to one of the `Main` listbases, so this code would have
undefined behavior. Now the pointer is null for elements in the "Current
File" element, causing a null-pointer dereference rather than undefined
behavior (that just happened to virtually always result in the intended
code path).
The indirect library data icon was just a grayed out version of the
regular one. This graying out is now done in code, so the icon can be
removed from the SVG. Note that the icon is still defined as
`ICON_LIBRARY_DATA_INDIRECT` (or `LIBRARY_DATA_INDIRECT` in BPY).
The lines paint mask IBO extraction was not implemented for GPU subdivision.
For it to work, we also now need to preserve the subdivision loop to
subdivision edge map, which until now was overwritten to store coarse edges
(the map to coarse edges is still preserved).
Also the paint flag stored in the 4th dimension of the loop normal buffer
was not properly set for flat shaded faces, leading to other kind of
artefacts and render issues.
The problem was when the stroke had less weights that the total number of vertex groups.
The API checked the total number of groups, but this is not required because `BKE_defvert_find_index` returns NULL is the vertex group index does not exist.
If creating partial hierarchy overrides (from the outliner e.g.), that
need to create extra overrides, those could be re-created everytime,
leading to very bad situation where there would be several overrides of
the same reference ID in the same override hierarchy.
This fix makes it so that existing overrides in a given hierarchy will
always be re-used in case other overrides are added to the hierarchy.
Replaces old-style memzero-style of call with zero-initializer.
Allows to shorten typical initialization code to a single line:
Object foo = blender:🧬:shallow_zero_initialize<Object>()
This will allow to more easily convert designated initializer
which is often used to fill object with zeroes to the explicit
function calls:
MyDNAStruct foo = {};
will be translated to
MyDNAStruct foo = blender:🧬:shallow_zero_initialize<MyDNAStruct>();
Differential Revision: https://developer.blender.org/D14486
Previously, those methods would destruct and reconstruct
the data structure. While that was more simple in initial
implementation, it has some downsides which are not resolved:
* Already allocated memory is lost. So new memory would have
to be allocated when the data structure is refilled.
* The clearing process itself was slower because it did unnecessary
work.
This simplifies debugging, and can help improve performance
by making it easier for the compiler.
More optimization might still be possible by using `__restrict` in
a few places.
Regression in [0] which removed a special check when tweak events ended.
Add a similar check for drag events that runs drag is disabled in the
main event handling loop.
[0]: 4986f71848
Since e49bf4019b, animation is handled explicitly. Split operator
wasn't updated.
Re-use backup-duplicate-restore animation functions, that other
operators use for splitting.
Regression in [0] error iterating over pose bones which only used the
active-object, also follow the same logic as edit-mode for using the
local-matrix.
[0]: d052169e7e
Regression in [0], also use pad buffer by 1 instead of 2 which is no
longer needed as the trailing slash is no longer added
after allocating the string.
0682af0d63
This is meant to allow using C++ data structures in this file
as a performance improvement. Particularly `Vector` instead
of `ListBase` for `duplilist`. This changes builds on all
platforms on the buildbot.
This is meant to allow using C++ data structures in this file
as a performance improvement. Particularly `Vector` instead
of `ListBase` for `duplilist`. This change builds and passes
tests on all platforms on the buildbot.
This is meant to allow using C++ data structures in this file
as a performance improvement. Particularly `Vector` instead
of `ListBase` for `duplilist`.
Differential Revision: https://developer.blender.org/D14475
If the `Automatic Constraint` modifier was activated while an axis
constraint was already set, the orientation used would be the default
orientation of the mode and not that of the scene.
This was because the `initSelectConstraint` function was not called in
this case and the `Automatic Constraint` mode was enabled by other
indirect means.
So the solution is to call `initSelectConstraint` in either case and
remove these "indirect means" of enabling `Automatic Constraint`.
Contrary to the initial intention (in rB9916e0193c36), `TREDRAW_SOFT`
flag, when isolated, is not cleared in `transformApply` and therefore is
used in the `drawTransformApply` callback which basically recalculates
the `transformation` which finally clears the flag.
So remove the `drawTransformApply` callback so `transformApply` is not
called when unnecessary.
Differential Revision: https://developer.blender.org/D14430
The solution supposedly listed all cases that `absolute grid snapping`
was supported. But it ignored some occasions like: Editing Surface
objects, Texture Space.
List now only the cases where this feature should not be supported.
The Library Overrides display mode is meant to show overridden
properties from the current file only, not library overrides in
data-blocks that just were linked in. The upcoming Hierarchies view mode
for Library Overrides will also display linked in data-blocks that have
overrides in the source file (but not the individual overridden
properties), see T95802.
This was a mistake in the conditional structure introduced in 4b35d6950d
This commit also adds a new type of snap exclusion: `SNAP_NOT_EDITED`.
Thanks to @Ethan1080 for pointing out the error.
In preparation for supporting packing of UDIM tiled textures, this patch
refactors a small portion of image.cc. The refactor should lead to less
duplicate code now and when Tiled images are added in the near future.
This patch is based on the prior work done for D6492 where it was
requested this part be split and can be summarized as follows:
- `load_sequence_single` is removed and merged with `load_image_single`
- `image_load_sequence_file` is removed and merged with `image_load_image_file`
Reviewed By: lukasstockner97
Differential Revision: https://developer.blender.org/D14327
On Windows/MSVC this gives a minor (~20%) speedup presumably due to a faster float/int formatter. On macOS (Xcode13), this gives a massive speedup, since snprintf that is in system libraries ends up spending almost all the time inside some locale-related mutex lock.
The actual exporter code becomes quite a bit smaller too, since it does not have to do any juggling to support std::string arguments, and the buffer handling code is smaller as well.
Windows (VS2022 release build, Ryzen 5950X 32 threads) timings:
- Blender 3.0 splash scene (2.4GB obj): 4.57s -> 3.86s
- Monkey subdivided level 6 (330MB obj): 1.10s -> 0.99s
macOS (Xcode 13 release build, Apple M1Max) timings:
- Blender 3.0 splash scene (2.4GB obj): 21.03s -> 5.52s
- Monkey subdivided level 6 (330MB obj): 3.28s -> 1.20s
Linux (ThreadRipper 3960X 48 threads) timings:
- Blender 3.0 splash scene (2.4GB obj): 10.10s -> 4.40s
- Monkey subdivided level 6 (330MB obj): 2.16s -> 1.37s
The produced obj/mtl files are identical to before.
Reviewed By: Howard Trickey, Dalai Felinto
Differential Revision: https://developer.blender.org/D13998
so a layer can be occluded by the scene instead of always showing in front
---
{F12827163}
Reviewed By: fclem, antoniov
Differential Revision: https://developer.blender.org/D13931
A user asked for this increase. The performance lags when reaching
the upper limit of this number of segments, but if you need that
many segments, I guess you are willing to wait.
The code that eats away faces until you find input faces in
the Constrained Delaunay Triangulation goes too far and crashes
when there are no input faces. In the test case there were input
faces but they only had two vertices, so were all ignored.
The logic used to be:
"if collection doesn't have child collection, check if ob is from this one"
The correct logic should be:
"if collection child does not have this ob, then check this collection".
For lineart_LineIntersectTest2d, it fixes the output to 0 or 1 when it's
close enough, gives correct range for point_on_triangle identification.
Then it gives more information through aAligned, which will be true if
two lines completely align, this helps later identification.
Finally: it handles complex cases where one point is on the edge of
a triangle while another point is on the outside.
This is caused by line art loading curve objects twice from curve and converted mesh instances (when instance option is on). Now only load mesh when instance option is on.
This change reduces the GPU context switches when drawing keyframes.
In the previous situation the keyframe blocks and keyframe keys were
drawn per channel. With this patch first all the keyframe blocks are
drawn for all channels and after that the keyframe keys are collected
for all channels and send to the GPU in a single draw call.
This was left over from when these scripts were loaded as modules,
where their names needed to be compatible with Pythons module naming.
Version patch existing files so text with register enabled
without a `.py` extension wont start executing on startup.
Resolves T89532.
This supported calculating normals for MPoly array which was copied to
an MFace aligned array.
Remove the functions entirely since MFace use is being phased out and
these function isn't used anywhere.
Use BKE_mesh_calc_normals instead of
BKE_mesh_calc_normals_mapping_simple for curve modifier calculation.
This only made sense for derived-mesh which is no longer used.
Remove the 'only_face_normals' argument.
- BKE_mesh_calc_normals_poly for polygon normals.
- BKE_mesh_calc_normals_poly_and_vertex for poly and vertex normals.
Order arguments logically:
- Pair array and length arguments.
- Position normal array arguments (to be filled) last.
Optimize mesh normal calculation.
- Remove the intermediate `lnors_weighted` array, accumulate directly
into the normal array using a spin-lock for thread safety.
- Remove single threaded iteration over loops
(normal calculation is now fully multi-threaded).
- Remove stack array (alloca) for pre-calculating edge-directions.
Summary of Performance Characteristics:
- The largest gains are for single high poly meshes, with isolated
normal-calculation benchmarks of meshes over ~1.5 million showing
2x+ speedup, ~25 million polygons are ~2.85x faster.
- Single lower poly meshes (250k polys) can be ~2x slower.
Since these meshes aren't normally a bottleneck,
and this problem isn't noticeable on large scenes,
we considered the performance trade-off reasonable.
- The performance difference reduces with larger scenes,
tests with production files from "Sprite Fight" showing
the same or slightly better overall performance.
NOTE: tested on a AMD Ryzen TR 3970X 32-Core.
For more details & benchmarking scripts, see the patch description.
Reviewed By: mont29
Ref D11993
The poll for unlinking calls `nla_panel_context` without providing an
adt pointer, and there is a check for this pointer in
`nla_panel_context` leading to never returning true if it is not
provided. (this is fine if there are tracks already, poll would succeed
in this case, `nla_panel_context` goes a different code path then)
Same call to `nla_panel_context` is also done in the beginning of the
corresponding unlink exec function (but this time providing the pointer
because it is used later), so it makes sense to do the same thing in the
poll function. Equal check is also done in the panel poll function, so
now these are all in sync.
Part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11041
Was reported for a file which does not have an active track set in
AnimData even though it was in strip twek mode (but this was accessed in
is_nlatrack_evaluatable()).
Root cause for this is not totally clear, but I assume the situation is
described as part T87681 (and is fixed in D11052).
This patch here just prevents the crash for files that are already in the
borked state.
Reviewers: sybren
Maniphest Tasks: T89805
Differential Revision: https://developer.blender.org/D12085
Clearing the parent from the UI using the X (or from python) clears the
`parsubstr` and set `partype` back to `PAROBJECT`.
Using the Clear Parent operator would leave the `parsubstr` (and thus
`parent_bone`) untouched even though this operator claims to "clear
parenting relationship completely" (it also removes parent deform
modifiers for example).
So now, also clear `parsubstr` and set back to `PAROBJECT` [which is
default].
Maniphest Tasks: T88498
Differential Revision: https://developer.blender.org/D11503
Add Apply Constraint, Duplicate Constraint, and Copy To Selected
operators, and include them in a menu similar to the menu for modifiers.
The shortcuts in the extras menu are also matched to modifiers.
All the here added operators are intended to work exactly like the
analogous ones for modifiers. That means the apply operator should apply
a constraint as if it was first in the list, just like modifiers do. I
have added the same warning message as for modifiers when that happens.
The decision to use this approach of appling the constraint as if it was
first, was made for consistency with modifiers. People are already used
to how it works there. Is also provides more intricate control over the
applied transforms, then just applying all constraints up to that one.
Apply all constraints is already kinda implemented in Bake Animation.
Reviewed By: HooglyBoogly, sybren, #user_interface
Differential Revision: https://developer.blender.org/D10914
During the processing of a continuous drag event, other mouse move
events may be in the queue waiting to be processed.
But when a mouse wrapping happens, these waiting mouse move events
become out of date as they report a mouse position prior to wrapping.
The current code ignores these events by comparing their `timestamp` to
the time recorded in the last mouse wrapping.
The bug happens because the computed value in
`mach_absolute_time() * 1e-9` for some reason is incompatible with the
value of `[event timestamp]`.
Since macOS 10.6, we have a new way to get the amount of time the
system has been awake. `[[NSProcessInfo processInfo] systemUptime]`.
Using this updated method fixed the problem.
Differential Revision: https://developer.blender.org/D12202
Clearing the window was done in wm_file_read_post which was deferred.
This was needed as it left the context in an invalid state
where the window was set but the screen wasn't.
Crashing when setting up keymaps that attempted to access the
scene from the window in the property update function.
Regression in 497bc4d199
Add RNA_struct_type_find_property_no_base for use in the rare situations
when this isn't desired.
Resolves T90617, where sequence strip sub-types weren't detecting
properties that exist in the base "Sequence" types.
- Remove old comment for editors with weak syntax highlighting.
- Remove disabled code to initialize Blender with a file path.
- Remove file name references to function names since these
were outdated, modern development environments can look up this info.
Resolve order of initialization error reading startup file,
support postponing running wm_file_read_post until Blender
has been initialized.
Deferring updates allows duplicate initialization
to be removed from WM_init.
Reviewed By: mont29
Ref D12184
Makesdna fails to detect issues in 32 bit code that can
only be resolved by adding a padding pointer.
We never noticed since we ourselves no longer build for
32 bit, but debian's 32 bit builds got bitten by this
A rather extensive explanation on why this is alignment
requirement is there can be found in this comment:
https://developer.blender.org/D9389#233034
Differential Revision: https://developer.blender.org/D12188
Reviewed by: sergey, campbellbarton
Some of the dna structs were not properly
aligned for 32 bit builds causing issues
for some of the 32 platforms Debian builds
for.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D9389
The loading of a font size or style renders bitmaps of the characters
0-255 and stores them in a cache. But glyphs 128-255 in this cache are
not accessible. What used to be ansi high-bit characters are now multi-
byte UTF-8 sequences.
Therefore this patch reduces the glyph_ascii_table size to 128 and
only caches characters 32-127, the visible portion of ASCII, which
greatly reduces the time to load a font.
See D12189 for more details.
Differential Revision: https://developer.blender.org/D12189
Reviewed by Campbell Barton
Before this commit rendering material icons the floor will is hidden.
This reduces the readability of reflective/refractive materials.
check patch for additional screenshots and notes.
This patch will switch the floor material that uses ray visibility tricks to render a floor for reflective rays.
Eevee uses screen space reflections that makes this a different problem. There is nothing else drawn in
the scene in screen space so we need a different trick. Using math we convert a reflective ray to UV space
and generate a world that projects a checker pattern to infinity.
As now the floor is in the world it is being reflected via
a cubemap. As the film is transparent the background (including the floor isn't rendered)
In the future when Eevee supports vulkan raytracing we can re-evaluate and perhaps remove this
approximation.
We tried lightprobes but that wasn't able to do the trick.
Using the compositor would lead to more memory usage (render layers and intermediate buffers) and slower performance.
Solution has been validated with Simon
Reviewed By: sybren, Severin
Differential Revision: https://developer.blender.org/D11988
To improve the presentation of nodes in the node editor. Recognize the
following metadata from the OSL specification:
* [[ string label = "UI Label" ]]
* [[ string widget = "checkBox" ]]
* [[ string widget = "boolean" ]]
Ref T89741
Differential Revision: https://developer.blender.org/D12074
Idea for 3.0 is to disable all functionality that isn't well polished
and focus on those parts first. Starting with poses.
* Adds a new experimental option "Extended Asset Browser", replacing
"Asset Browser".
* Unlike the previous option, this isn't enabled by default anymore.
This didn't work well in practice and caused plenty of confusion.
* "Mark as Asset" and "Clear Asset" are hidden if the option is
disabled.
* Same for the category selection in the Asset Browser.
* Always show display the "Only Assets" option in the File Browser while
browing inside .blend files. That way you can hide data-blocks that
are not pose assets.
* The Asset Library setup UI in the Preferences is always visible now,
it's needed for pose library access.
Addresses T90181, T90180 and T90300.
Differential Revision: https://developer.blender.org/D12120
ID data-blocks that could be accessed from Python and weren't freed
using BKE_id_free_ex did not release the Python reference count.
Add BKE_libblock_free_data_py function to clear the Python reference
in this case.
Add asserts to ensure no Python reference is held in situations
when ID's are copied for internal use (not exposed through the RNA API),
to ensure these kinds of leaks don't go by unnoticed again.
Using high quality normals for vertex offset when set
for higher precision offsets.
This was only used for calculating even-offset.
Reviewed By: campbellbarton
Ref D12176
This is a slight refactoring of the Win32 IME code to remove the use of
Language IDs, which is now strongly deprecated. Instead this uses the
new recommended Locale Names, ie ISO-639-1 2-letter abbreviated names
like "en" for English rather than ID 0x09.
See D12143 for more details.
Differential Revision: https://developer.blender.org/D12143
Reviewed by Ray Molenkamp
bounding boxes
These are namely 'LIGHT', 'CAMERA', 'EMPTY', 'SPEAKER' and 'LIGHTPROBE'.
Note that Empties are included here despite the fact that they have
instancing capabilities ('Display As' can be 'Bounds' for example which
then displays all instanced geometry with boundingboxes -- this however
is not meant to work with the 'Bounds' checkbox and the display bounds
type, these are only affective for the object itself, not its instances)
Issue came up in T88443.
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11344
Adds full frame implementation to "Composite", "File Output" and
"Split Viewer" nodes.
The other nodes in "Output" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12091
Adds full frame implementation to "Alpha Over",
"Hue Saturation Value", "Invert", "Tonemap" and "ZCombine" nodes.
The other nodes in "Color" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12092
It was only affecting tiled fallback on full frame mode. If tiles from a
constant operation were multi-thread initialized, its buffer
was inflated multiple times.
Adds full frame implementation to "Bokeh Image" node, "Track Position"
node, `SetVectorOperation` and `MovieClipAttribute`.
The other nodes in "Input" submenu are implemented separately.
`MovieClipAttribute` needs resolution to calculate its constant value, it can't be constant folded,
which requires it to be a `ConstantOperation`. Now `ConstantOperation` contemplate this case
and any operation that is always constant without depending on inputs should implement it.
If in the future an operation needs to get an input constant element during
`determineResolution` it must first determine its input resolution.
The nodes have no functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12090
Adds full frame implementation to this node operations.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11751
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11634
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11694
Empties can only instance a collection, instancing on "Vertices" or
"Faces" does not make sense for empties, make that clear in the UI.
ref D11348
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11349
Basically, only meshes, empties and pointclouds support direct
instancing atm., no need to have the panel for other types.
note: prior to rB2eca054e14b1, collection instancing was possible on all
types (but that was removed in said commit)
note2: for empties, rna_Object_instance_type_itemf should also be
tweaked so we dont get "Vertices" and "Faces" options, but that can be
done in a separate commit
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11348
Added the comparison of non-generic attributes with generic
attributes in the same loop to avoid issues with different
order in layer->types of the two meshes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12149
Caused by {rB37570a73170e}.
Above commit wasnt taking into account that at this point the link could
still be NULL.
Maniphest Tasks: T90564
Differential Revision: https://developer.blender.org/D12180
Right clicking would spawn the context menu under the cursor, but some
operators would actually act on the active asset/file which wasn't
the one clicked on.
When multiple files are selected and one of them is right-clicked on,
selection is not changed to allow operations on multiple files. E.g.
deletion.
This makes the File/Asset Browser match the Outliner (in behavior, not
implementation).
For the right-click selection keymap:
* The context menu still only spawns on W.
* Bonus: Right click now does something, it actually selects files!
I could have done additional changes here to avoid this, but it seems
like a good addition.
This is also a better alternative to rB5edfde58fe60, which didn't work
properly either. Using rename from the context menu would only work if
the clicked on file was also active...
Differential Revision: https://developer.blender.org/D12065
Reviewed by: Campbell Barton
When blender starts and the mouse is over a file/asset browser it
crashes. This is because blender wants to highlight a file, but the
layout isn't initialized yet.
Blender forbids property changes in .draw() methods. But they weren't
caught after a call to .template_list() with a custom list type.
Support nested calls that disallow writes.
Caused by {rBe3faef686d38}.
Error was getting the preview [which wasnt there yet]
These only appeared once the material tab in the Properties Editor was
used (since this ensured a valid preview icon).
Above commit changed behavior for RNA icon getter (this does not create
data anymore), so ensure the preview by hand here.
Maniphest Tasks: T89284
Differential Revision: https://developer.blender.org/D12178
This was really missing there (some COW tags behavior was also
documented in some code using them, like in `sound.c`, but not in their
definition).
Ref. T88555.
Change the dylib folder relative to `Blender` executable to be
the same as before rB652fbc200500497a67bd11d18b786587ba34e3d9 and same
as bpy.so : `@loader_path/../Resources/${BLENDER_VERSION}/lib`
The crash occurred calling because mesh_get_eval_final in edit-mode
freed all derived mesh data without tagging the object for updating.
However meshes in edit-mode weren't meant to be used as knife-project
source-data, adding support for multi object edit-mode caused this.
This commit makes the display options for mask only show in the header for the clip and image editors.
Prior to this change they would display in the header for the clip editor and in the sidebar for the image editors.
This commit does two things, first it removes the proportional editing tool settings.
This is not accessible code and is has not been used since the grease pencil/annotations changes in 2.8.
Second, this patch reorders the if statements so that the display options are always shown on the rightside.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12163
This seems to be really old code from 2.4 or earlier.
I was unable to find when it was removed gitk and git blame both couldnt find anything.
However, it is safe to say that this code is long gone.
Fix poll_message_set API documentation to consistent with Python style
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D12150
This adds support to compile the html python api docs from the command line by running `make doc_py` matching support between windows and unix.
This patch also makes it so the compiler is not needed if you set the `blender_bin` variable, this affects icon generation as well.
In the future, I want to move away from generating the build output in the build directory but that can come in a later change.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D12144
This is a backport of recent development in the Cycles X branch.
Fixes possible dead-lock in viewport rendering when exiting at an
exact bad moment (couldn't reproduce in master branch, but in the
cycles-x branch it was happening every now and then).
Differential Revision: https://developer.blender.org/D12154
Makes it consistent with the guidelines and the Cycles X branch, and
allows to backport fix for the viewport update from the branch. Will
cause a merge conflict, which should be simple accept-ours in the
branch.
The library has some modifications and it has been included in a diff.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12142
(Some minor changes done in the patch)
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
This corrects code that's currently disabled, see `USE_NURBS` define.
The name passed to `BKE_curve_add` was overwritten,
bypassing uniqueness and utf8 encoding checks.
Longer names would cause a buffer overrun as the length of the source
data was passed to `BLI_strncpy` instead of the destination.
Reviewed By: sybren
Ref D12125
This caused Cycles texture_space_mesh_modifier and panorama_dicing tests to
randomly fail.
The issue was introduced with D11377, due to a missing dependency. Now ensure
we first copy the texture space parameters, and only then use or recompute then.
In general it seems like this dependency should have already been there, since
parameter evaluation includes animation and drivers, and geometry evaluation
may depend on that (even if you would not typically animate e.g. an autosmooth
angle).
Thanks Campbell for tracking this one down.
Although the relevant structs (wmXrRuntime/XrActionMap/
XrActionMapItem) are zero-allocated, the selected and active action
map indices need to be initialized to -1 to prevent potential
out-of-bounds list access.
Just like the "Select by Material" node, this node outputs a
boolean attribute for control points that have a matching handle
type. By default left and right handles are considered, but it's
possible to only check one side with the toggle in the node.
Differential Revision: https://developer.blender.org/D12135
Some mesh primitives created using geometry nodes use loops to create
vertices and accumulates positions/angles in FP variables. This allows
rounding errors to accumulate and can introduce significant errors.
To minimize changes from original implementation, variables allowing
errors to accumulate are replaced by: delta * index. Affected Mesh
Primitives nodes are Line, Grid, Cylinder, Circle, Cone, and UV-Sphere.
Differential Revision: https://developer.blender.org/D12136
Assigning a mesh seems to do its own parameter copying, which
means we need to manual copy its vertex groups here, which was
just overlooked in rB3b6ee8cee708.
Differential Revision: https://developer.blender.org/D12110
Generic attributes CD_PROP_* comparison is added in customdata_compare
Checks for built-in as well as user created attributes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12137
The Xcode IDE can also benefit from the options:
- WINDOWS_USE_VISUAL_STUDIO_SOURCE_FOLDERS
- WINDOWS_USE_VISUAL_STUDIO_PROJECT_FOLDERS
So add suport to these options and also renames them as they are no
longer limited to just Windows and Visual Studio.
Reviewed By: brecht, ankitm
Differential Revision: https://developer.blender.org/D12132
Practice shows that when combining actions and direct animation
it is usually best to combine location, rotation and scale
separately, which is implemented by the Split Channels modes
recently introduced in D9469 for Copy Transforms. This completes
the same set of 6 choices for the Action Constraint.
The default for new constraints is changed to the newly
added Before Original (Split Channels) mode.
The original patch is motivated by Loic Pinsard, who created
an addon that does the equivalent of this feature by splitting
the action into two, separating location and rotation+scale.
Differential Revision: https://developer.blender.org/D7547
The exception to automatically pin vertices of grid corners also
has to take into account that the vertex is in a boundary.
Reviewed By: JacquesLucke
Maniphest Tasks: T90235
Differential Revision: https://developer.blender.org/D12044
The active geometry element are usually updated by the cursor drawing
code (as they are needed for the cursor preview) and when an sculpt
operator starts. For brushes, this was not happening. This was making
brushes rely by default on the last cursor drawing update, which can
be incorrect if the mouse moved after starting the stroke without
hovering the active geometry.
Reviewed By: JacquesLucke
Maniphest Tasks: T90236
Differential Revision: https://developer.blender.org/D12045
Add warning(info) to nodes that don't work when an input value is
out of range. For example, the grid node doesn't work with Vertices X
or Verices Y less than 2.
These are purposefully added as "Info" warnings, because they don't
show in the modifier and they aren't printed to the terminal.
Differential Revision: https://developer.blender.org/D11923
The immediate reason for this is that we want to be able to initialize them
to different defaults for light objects, which is hard with Python properties.
But in general it is useful to be able to share these with other renderers.
As a side effect, Eevee now supports a per-object holdout instead of only
per-collection.
Differential Revision: https://developer.blender.org/D12133
Code freeing the array would not properly reset its length value to
zero.
Note that this corrupted data could also be saved in .blend files, so
had to bump fileversion and add some doversion code too.
Fix T90166: crash when creating a liboverride.
This was apparently done in two places only, with a very cryptic comment
(`/* for raw_access, untested */`), and... I cannot see how returning a
non-zero length value for an array that does not exist or is not
accessible at least, would be anything but an obvious source of issues.
Note that both commits adding those lines are from stone ages (2009):
rBcbc2c1886dee and rB50e3bb7f5f34.
The keymap is available in: Draw, Edit, Sculpt, Weight Paint and Vertex Paint modes.
The keymap is not available in Object mode to avoid any conflict.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12128
This is a simple engine used only to debug the texture of select ids.
It is only used when the `WITH_DRAW_DEBUG` option is enabled and the
debug value is 31.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5490
Addresses the remaining portions of T77137 (Python API for Controller
Interaction), which was partially completed by D10942.
Adds an XR "action maps" system for loading XR action data from a
Python script. Action maps are accessible via the Python API, and are used
to pass default actions to the VR session during the
xr_session_start_pre() callback.
Since action maps are stored only as runtime data, they will be
cleaned up with the rest of the VR runtime data on file read or exit.
Reviewed By: Julian Eisel, Hans Goudey
Differential Revision: https://developer.blender.org/D10943
This is not supported currently,doing so through RNA API remains
possible, but from regular UI operations it should not be doable
anymore.
Ref. T90459.
LibOverride of scenes is not really supported currently, there are many
issues with it.
Will disable most user-accessible ways to create such overrides in a
following commit.
Provides two key improvements to runtime controller data.
1. Separates controller poses into two components, "grip" and "aim",
which are both required to accurately represent the controllers
without manual offsets.
Following their OpenXR definitions, the grip pose represents the
user's hand when holding the controller, and the aim pose represents
the controller's aiming source.
2. Runtime controller data is now stored as a dynamic array instead
of a fixed array. This makes the API/functionality more adaptable to
different systems.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12073
Vertices with no connected faces would attempt to divide by the combined
face area causing a divide by zero.
Use the same weight for wire vertices as vertices connected
to zero area faces.
Protect this accessor with a local static mutex when it needs to
create/write data.
Ideally accessors should never create or modify data, but there are some
cases where this bad behavior is currently unavoidable.
This is the case of the Pointer accessor when the actual IDProperty has
not yet been created.
NOTE: this fixes a memory leak in liboverride diffing process when
several different overrides use a same linked reference ID.
Differential Revision: https://developer.blender.org/D12060
Even though the ID itself remain the same after being made local, from
depsgraph point of view this is a different ID. Hence we need to tag all
of its users for COW update, as well as rebuild depsgraph relationships.
Should be also backported to LTS 2.93 (and 2.83 if possible).
Negative indices that remained negative after adding the sequence length
caused incorrect slicing.
With the default scene for example:
bpy.context.scene.objects[-4:2]
Gave a different result to:
tuple(bpy.context.scene.objects)[-4:2]
Clamp indices above zero so loops that step forward works as intended.
Provides several important improvements to the runtime action
bindings operation and internal API.
Moves input-specific action data (input thresholds, input regions,
pose offsets/spaces) from actions to more granular action bindings.
This allows a single action to be mapped to a variety of inputs,
without having to share a single input threshold, region, or space.
Also removes the need for action space creation API, as spaces for
pose actions will be automatically created with the bindings.
The correct action data for the current inputs is set by calling
xrGetCurrentInteractionProfile() to get the current profile and then
retrieving the corresponding mapped data.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12077
This adds support for building the icons from make.bat
unlike bash there is no passing environment variables
on the command line.
The scripts go out of their way to locate both blender
and inkscape however if they are not found, the user is
given a helpful error message telling them how to set
the variables.
Although some extra help can be given there, if your
normal build is a 2019 full build running
`make 2019 full icons`
will help it find the blender executable as well.
finally if you know the name of your build folder
running
`make builddir build_windows_Lite_x64_vc16_Release icons`
will also work, if all fails you can point directly to
the blender executable by running
`set BLENDER_BIN=c:\where\blender\lives\blender.exe`
before running `make icons` or `make icons_geom`
The python scripts needed some small modifications since
without the PATHEXT, SystemRoot and SystemDrive
environment variables python will not initialize properly
on windows. (Not blender related, even mainline python
won't start without those)
GHOST_ImeWin32::SetInputLanguage() has a confusing name because it does
not set the input language. It actually retrieves the current input
locale from the OS and caches the value of the current input language
ID. Therefore this patch renames it to "UpdateInputLanguage"
Differential Revision: https://developer.blender.org/D12134
Reviewed by Ray Molenkamp
This removes one member of GHOST_ImeWin32 that is not used and cannot
be used in the future. It is holding the result of ImmIsIME, which is
whether an input language supports IME. It does not indicate that one
is in use, turned on, composing, in English mode, etc.
see D12131 for more information.
Differential Revision: https://developer.blender.org/D12131
Reviewed by Ray Molenkamp
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
This patch makes us less restrictive on the allowed types of FreeType
font character maps we allow, rather than primarily unicode-only. This
allows us to use some legacy, symbol, specialty, and proprietary fonts
like Wingdings. Note we were a little less restrictive with vfonts,
used for 3D Text Objects, so this patch primarily helps VSE.
See D12124 for details and examples.
Differential Revision: https://developer.blender.org/D12124
Reviewed by Brecht Van Lommel
When displaying the names of fonts for 3D Text objects, use the same
format as shown in File Browser: Family name + Style name. They are
currently shown with Postscript Name, which doesn't match well.
see D12069 for more details.
Differential Revision: https://developer.blender.org/D12069
Reviewed by Campbell Barton
The goal: allow to easily use AO approximation in scenes which combines
both small and large scale objects.
The idea: use per-object AO distance which will allow to override world
settings. Instancer object will "propagate" its AO distance to all its
instances unless the instance defines own distance (this allows to
modify AO distance in the shot files, without requiring to modify props
used in the shots.
Available from the new Fats GI Approximation panel in object properties.
Differential Revision: https://developer.blender.org/D12112
This is used to set the default caps type for the stroke. Before always was rounded and only could be changed later in Edit mode
Two new buttons has been added to topbar.
NOTE: New icons are been designed (T90414)
The buttons are expanded to list in Properties panel.
Reviewed By: mendio, HooglyBoogly
Differential Revision: https://developer.blender.org/D11999
rBfb87d236edb7 made the values returned by `projmat_dimensions` more
standardized following the documentations. But the functions in Blender
that called `projmat_dimensions` followed a proposal that these values
corresponded to a distance of 1m of clip.
Adjust these functions to follow the new algorithm.
This patch fixes an issue with missing faces when assigning a material slot other than the first to faces on AMD TAHITI cards. Refer to T78390 and T74024 for a description of this issue.
This patch also incorporates fix from T78390 for KAVERI.
{F9029258}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9305
Rename new API function introduced in recent rB3b0fab6dfaa0 to match our
convention to put the action (verb) at the end of names:
`operations_update`.
Sorry for not catching that during review.
Previous check was too blunt, preventing e.g. re-organization of
collection overrides inside a local parent collection, which is
perfectly valid operation.
Reported by @hjalti from the studio, thanks!
Loopcut drawing from gizmo had thicker lines because
it was using line smoothing without alpha blend, compared
to thin jagged lines from operator.
Make the drawing anti aliased and consistent by using
3D_POLYLINE/3D_POINT shaders, and making sure alpha
blending is on.
Reviewed By: #eevee_viewport, fclem
Differential Revision: https://developer.blender.org/D11333
While most modifies don't handle out of memory cases, ocean simulation
could attempt huge allocations: 2048 gb at the maximum resolution.
Resolves T83952.
The update_operations function will update the override structure of the
local object. When working with overrides the override structure is only
updated when the work-file is stored. When using scripts you might want
to enforce the update of override properties and operations.
This function removes a hack on the test cases.
Reviewed By: mont29
Maniphest Tasks: T86656
Differential Revision: https://developer.blender.org/D10848
This patch changes the drop named material tooltip to give feedback to
the user what is going to happen when they invoke the change.
There are 3 states:
* "": Operator will be canceled as not all data is present (dropping on
background.)
* "Drop <named material> on <object name> (slot <slot number>, replacing
<current material in slot>).
* "Drop <named material> on <object name> (slot <slot number).
Reviewed By: Severin
Maniphest Tasks: T90371
Differential Revision: https://developer.blender.org/D12106
This node sets the selected (or all) splines in curve to a chosen target
spline type. Poly, Bezier, and NURB splines can be converted to any of
the other types. This is meant to be a building block node, useful in
many procedural situations.
In the future the node could be optimized with multi-threading, or by
avoiding copying in many cases, either by retrieving the curve for write
access or by passing the raw vectors to the new splines where possible.
With edits from Hans Goudey (@HooglyBoogly)
Differential Revision: https://developer.blender.org/D12013
`r_left`, `r_right`, `r_bottom` and `r_top` were ignoring `clip_near` value
when in perspective view.
Also rename `projmat` to `winmat` in these cases.
A point of confusion about this node is that it doesn't work on the
output of the mesh circle primitive node. This patch adds a warning to
help with that. This avoids adding a warning when the geometry set
input has no mesh.
Differential Revision: https://developer.blender.org/D11771
As noted in a comment now, these functions only update a cache, so they
don't change the logical state of the mesh, which is "it will have the
data when necessary." Using a const argument will help const correctness
when accessing an object's evaluated mesh.
This code was written for the File Browser together with the Asset Engine
design, that is not part of the Asset Browser/System design anymore. Updated
comments accordingly.
`FileDirEntryRevision` was actually used, but I removed it and moved the used
members to the parent `FileDirEntry`, since there is no concept of revisions
currently.
There should be no functional changes.
Similar to how `GVArray_For_VArray` implements `materialize_impl` to
forward the work to its non-generic virtual array, we can do the same
thing for the mutable version, `GVMutableArray_For_VMutableArray`.
This commit should have no visible changes, since as far as I can tell
the only user of this class does not implement special materialize
methods anyway.
This enables the overlay for instanced geometry.
After this change, objects that are an instance of the current active
object (which are also being modified in the current active mode) won't
fade, which is different from the previous behavior.
Reviewed By: fclem
Maniphest Tasks: T82155
Differential Revision: https://developer.blender.org/D9362
When checking if the mesh has only one Face Set only the current active
component for expand needs to be checked. Otherwhise other components
that won't be modified by Expand that contain other IDs will be taken
into account, making the Face Set deletion go into an infinite loop.
Reviewed By: JacquesLucke
Maniphest Tasks: T88060
Differential Revision: https://developer.blender.org/D11169
Update the "current value" of the Shape Key blend amount when value is
not within the min/max range. New function `rna_ShapeKey_update_minmax`
used to update and clamp the current value.
Reviewed By: mano-wii, lichtwerk, #animation_rigging, sybren
Maniphest Tasks: T54339
Differential Revision: https://developer.blender.org/D11071
When a scene uses cryptomatte the viewport rendering would lead to a
memory leak. The reason was that all image renders (viewport+final)
activated cryptomatte. But is only used for final rendering.
This patch only activates cryptomatte when doing final rendering.
The Cycle-Aware Keying option was added in 2.8 and is used
to allow keyframing over cyclic F-Curves without disturbing
the cycle (e.g. overwriting an end keyframe updates both ends).
This effect is not limited to auto keyframing and is applied
to any key insertion, but when the popovers were rearranged
it was put in the Auto-Keyframing related one for some reason.
This is misleading, especially since because of that the
option is incorrectly greyed out when auto keyframing is
disabled, so move it to the generic Keyframing popover.
Differential Revision: https://developer.blender.org/D11213
Was giving a warning:
```
BKE_spline.hh:293:35: warning: 'interpolate_to_evaluated_points' overrides a
member function but is not marked 'override' [-Winconsistent-missing-override]
```
Mistake in {rBe48c4d73d378}.
Was using the vertex index as a lookup for the loop color (instead of
the loop index).
(Issue was not present in original D1429 btw).
Maniphest Tasks: T88145
Differential Revision: https://developer.blender.org/D11212
These variables and methods should make it easier to loop through buffers elements/pixels. They take into account single element buffers.
Single element buffers can be used for set operations to reduce memory usage.
Usage example: P2078
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D11015
While it was technically safe to call Map.remove while iterating over
a map, it wasn't really designed to work. Also it wasn't very efficient,
because to remove the element, the map would have to search it
again. Now it is possible to remove an element given an iterator
into the map. It is safe to remove the element while iterating over
the map. Obviously, the removed element must not be accessed
anymore after it has been removed.
This commit adds a new API tha allow to replace the bgl API in the exemples on:
https://docs.blender.org/api/current/gpu.html
**Overview (New API):**
```
gpu.state: active_framebuffer_get
GPUFramebuffer: read_color
GPUOffscreen: texture_color
```
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11031
Instead of creating different python wrappers for the same GPU object,
return the same `PyObject` created earlier.
This also allows for more secure access to existing GPU objects.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11044
The formula used to compute the bend did subtraction of two big numbers
to get the position. Changed to find the delta and add that,
by rearranging the formula into a more numerically stable form.
Reviewed By: mano-wii, campbellbarton
Ref D11074
Currently there is an "Auto" option for the domain, this commit adds a
similar option for "Auto" data type, that uses the data type from the
target attribute or the source attribute (in that order).
Ref T87347
Differential Revision: https://developer.blender.org/D10932
Rename BKE_object_runtime_free -> BKE_object_runtime_free_data,
since the runtime pointer is part of the object, only the data is freed.
Leave the data cleared to avoid accidental use,
this is in keeping with other `*_free_data()` functions.
None of these generic poll functions had NULL pointer checks,
since all operators that use these functions expect a valid constraint,
modifier .. etc. Add the NULL check to the poll function.
Ref D11126
Reviewed By: mont29, Severin
If no other object was selected while dragging one in (e.g. from the Outliner
or an object asset from the Asset Browser), all visible objects in the active
view layer would get selected.
Issue was caused by a wrong enum type use.
Mistake in bcdba7c34d.
This adds two new methods:
* `clear` just removes all keys from the vector set.
* `index_of_or_add` returns the index of a key and adds it if has not
been added before.
While fa7ddd0f43 fixed the reported issue,
the possibility of reusing runtime data during curve-to-mesh conversion
remained. Instead of treating the bounding-box as a special case,
clear all run-time data for temporary objects.
Ref D11026
Reviewed By: sergey
The term `verify` doesn't fit with what this function does
and is sometimes used to check data is valid or to control validity
checking as with `RNA_define_verify_sdna`.
use more common term `ensure`.
This adds a callback to bNodeTreeType to check which socket types are
valid for the tree type. Function has been implemented for the normal
tree types, and can be implemented for custom node trees with python,
by adding a `classmethod` to the tree. However, only builtin socket
types are supported.
This is relevant for T87049, but it also has the advantage that it is
now clear which node trees support which sockets. Previously this
was assumed to be known by all developers.
Differential Revision: https://developer.blender.org/D10938
This is just linear interpolation, but it's nice to have an equivalent
to `mix3` for only two values. It will be used for interpolation of
values between bezier spline control points.
Currently when you try to convert a Text-object to Grease pencil from the Object-menu or via the operator in some other way, the Text-object is only converted to a Curve.
This commit converts that curve to a Grease pencil object.
Differential Revision: https://developer.blender.org/D11117
BMesh intersect could leave invalid items in the selection list,
causing a crash. The list is now cleared since boolean is such a
destructive operation, it's unlikely the selection order would be useful.
Thanks to @lukastoenne for finding the root cause.
This patch adds a threshold value to the glow effect in color mode.
Currently, the threshold is hardcoded to 5%.
You can select a color and specify a higher threshold to include
similar colors in the effect.
Note: depends on D10670
Reviewed By: #grease_pencil, pepeland
Differential Revision: https://developer.blender.org/D10672
This patch adds the Randomize options that exist in the Array modifier to the offset modifier.
Currently the patch uses
```
BLI_findindex(&gpf->strokes, gps);
```
to get the index of the current stroke for making each stroke a different seed value. This is how the noise modifier also gets the stroke seed value and it is noted there as well that this method is slow, and should be fixed in the future with another method of getting the stroke index.
Other methods were explored such as using the total number of points of the stroke, but that makes the randomize options incompatible with other modifiers before it such as Multiple Strokes, Array, Build, and Simplify.
{F9591325}
Differential Revision: https://developer.blender.org/D10171
Creating a shallow copy is sometimes useful to get a unique ptr
for a virtual array when one only has a reference. It shouldn't
be used usually, but sometimes its the fastest way to do correct
ownership handling.
Previously we could crash because we would not check if the modifier in
question actually was a line art modifier. We also did not query if the
modifier was disabled.
Add new function `blo_bhead_is_id_valid_type()` to correctly check the
blend file block type.
File block type codes have four bytes, and two of those are only in use
when these blocks contain ID datablocks (like `"OB\0\0"`). However,
there are other types defined in `BLO_blend_defs.h` that have four
bytes, like `TEST`, `ENDB`, etc.
The function `BKE_idtype_idcode_is_valid(short idcode)` was used to
check for ID datablocks while reading a blend file. This only takes a
2-byte parameter, and thus its result is invalid for the 4-byte codes.
For `TEST` blocks, it would actually consider it a `TE` block, which is
a valid identifier for a Texture. This caused the heap buffer overflow,
as the datablock is not a valid ID, and thus the bytes that were
expected to form an ID name actually encode something completely
different.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10703
Sculpt undo relied on having a mode-changing undo step to properly
apply changes.
However this isn't the case with startup files or when mixing
global undo steps with sculpt (see T82851, also fixed).
Undo stepping logic follows image_undosys_step_decode_undo.
This is basically done by ignoring override operations from old override
affecting ID pointer properties, when the new (destination) one is not
NULL.
Fix T86501: New object added to overridden collection doesn't show up in linking file on Resync.
This is more of a work-around actually, since there is no real way to
fix the issue in a fully automated and consistent way, it is caused by
older blender files being saved with 'broken' overrides.
WARNING: This cannot ensure that some purposedly edited/overridden ID
pointer properties won't be lost in the process.
Code would end up freeing some of the newly created overrides, which
were assigned to the matching linked ID's `newid` pointer, accessed
again further down the code.
Note that this is not a normal expected situation, and it won't give a
proper resync result anyway, but it might happen in some complicated
corner cases, and also quite often when dealing with older .blend files.
In some cases (advanced, low-level), we also want to remap pointers like
`ID.newid` or `ID.orig_id`.
Only known case currently is `id_delete`, to avoid leaving potential access to freed memory. See next commit and T86501.
Baking to Vertex Colors would always bake to sculpt vertex colors (if
such a layer is present) even if those are not enabled in the
experimental preferences. This would bake without an error but leave the
user without a result to look in the viewport.
Now check if sculpt vertex colors are enabled and only bake to them in
that case.
Maniphest Tasks: T86455
Differential Revision: https://developer.blender.org/D10692
- Add notes on portability.
- Use encoding argument for all file IO.
- Use integer math to calculate major/minor version, while float
division should be fine prefer matching Blender.
As Lineart can be considered a grease pencil feature is not logic to have a flag that only adds problems.
Also, the bf_gpencil_lineart has been removed and all code set inside bf_gpencil_modifiers.
It should not be possible to set the scene collection's color tag
through rna. Also adds a missing notifier for setting the collection
color tag from python.
After rB452a1c7b3838 there were still a few cases where the old
collection icon was used in the interface. Replace these with the new
filled collection icon.
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
The overlap with the `Panel` flags that start with "PNL" was quite
confusing because wasn't clear which enum a flag was from. The
new names are a bit longer, but the clarity is worth it.
Instead to use the ID of the object, now the parameter is an Enum with Selected object or New.
If use selected mode, the first grease pencil object selected is used. If none of the selected objects is a grease pencil object, a new object is created.
Small cleanup changes to the original patch.
Differential Revision: https://developer.blender.org/D9529
LibOverrides only support a small sub-set of PointCache features for now
(one cannot add new caches, baking in memory is not supported...).
Part of first step of T82503: support disk cache in liboverrides.
This was done as some sort of safety, but should not actually be needed,
and including tags like `ID_RECALC_POINT_CACHE` e.g. makes usage of
point caches impossible with liboverrides (since it would systematically
invalidate all cache on file load).
In theory we should not have to tag anything here in fact, RNA accessors
are supposed to take care of it, but for now we keep the
`ID_RECALC_COPY_ON_WRITE` one.
Part of first step of T82503: support disk cache in liboverrides.
Note that due to convoluted layout of point caches in RNA (active one
also storing list of all available ones), we'll often have the
pointcache overrides rules twice. Should not be a huge problem,
practically speaking.
Part of first step of T82503: support disk cache in liboverrides.
We already were using one of earlier RC of the library, so there is no
expected big changes. Just making the update official, using official
version and stating it in the readme file.
Becomes rather annoying to duplicate them across C/C++ GCC/Clang sets,
almost as if the test should test both C and C++, and to do it for all
compilers.
Solves strict warning in the upstream of Ceres library.
This reverts commit 9d172f007e.
Got a second thought and remembered why it was not done in the first place.
The issue here is that the server needs to communicate codesign result back
and that must happen within the new protocol. So if the client talks old
protocol it is possible to receieve data from it, but is not possible to
communicate result back to it.
Image format code checked the file type against an enum except for
zero which is used when the format can't be detected.
Also add doc-strings to some of the image file type callbacks.
the function vec_roll_to_mat3_normalized() has a bug as described in T82455. This Differential is only for refactoring the code such that it becomes more clear what the function does and how the bug can be fixed. This differential is supposed to not introduce any functional changes.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9410
HDRI preview should have resolution dependent on dpi, viewport scale and HDRI gizmo size.
This patch uses a LOD to render a more round sphere.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D9382
This would allow python script to access `lineWidth` uniform when drawing lines
without using `glLineWidth`.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D9518
Standard deviation formula wasn't being applied correctly when selecting
R G B cases. Issue is there since Blender 2.64 as it was incorrectly
ported over from the previous compositor.
Reviewed By: Sergey Sharybin, Jeroen Bakker
Differential Revision: https://developer.blender.org/D9384
This patch adds an opacity slider to the wireframe overlay. The previous
wireframe in dense geometry scenes could be too dark and sometimes the
user just wants an impression of the geometry during modelling.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D7622
This commit moves some of the logic around so that the logic in
panel_activate_state is clearly separated by the state being activated.
There are fewer nested and redundant checks, and it's easier to see
the progression of interaction with the panel handler.
The "UI_panel_set_expand_from_list_data" doesn't need to be in the
public API since it's just called every time an instanced panel is added.
This commit just sets the expansion automatically and adjusts some
naming to account for the moved function.
Before this change, when users switch from edit mode to sculpt mode, the
entire mesh would be visible. Even if in the edit mesh mode part of it was
set to invisible.
With this change the visibility is preserved, by creating a separate face set
for the visible and invisible parts of the mesh and setting their initial visibility.
Implementation details: This adds a function to initialize a new Face Set
datalayer taking the current mesh visibility into account which is stored
in the ME_HIDE flag of the vertices.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8901
This tool projects all vertices to the right of the plane defined by the
line gesture towards the plane. By doing this, this tool can create cuts
and plane surfaces in the mesh without modifying the geometry or using
boolean operations, so it is much faster than bisecting the mesh for
cases where the geometry was going to be remeshed afterwards.
Added as experimental as it does not have icon.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D9021
`SOCKET_OFFSETOF` was added in the initial commit {rBec51175f1fd6c91d5}
when `offsetof` [1] was not supported well enough. GCC and LLVM
support it since C++17.
Other two changes: type and size check can be done without creating
an invalid address too.
[1] https://cppreference.com/w/cpp/types/offsetof
Reviewed By: campbellbarton, brecht
Maniphest Tasks: T81100
Differential Revision: https://developer.blender.org/D9042
This took more than a day to fully investigate and understand, one of
the reasons being that the probability of the issue to show up was
extremely low, and subjected to very specific random factors.
Root of the issue is that, in some very rare cases, a newly read ID
might get the exact same memory address as the one it had when the blend
file was saved.
In that case, `BKE_workspace_active_set` would return immediately, since
the pointer to the active workspace would remain unchanged. But that
lead to having an unset NULL active layout pointer, which would crash
when attempting to get e.g. the active screen.
For the record, I ran into this when running a specific build (master
with one flag added to the `LIB_ID_CREATE` ones, with value `1 << 3`),
using a specific set of options (`--background --factory-startup -noaudio`),
and passing the .blend file from T80090 as argument.
Remove the attempt to update the active layout pointers of each window
from whithin `direct_link_workspace`.
This piece of code was a nonsense for at least to critical reasons:
* Do not, never, ever, access data from another datablock within the
direct_link_... functions. Just don't. Don't try to be smart.
* Since it was trying (and failing) to update the active layout of every
window for every workspace, it was effectively setting those
`act_layout` pointers to NULL (remapping can only ever happen once,
trying to remap and already remapped new pointer is bound to fail in
any case).
Luckily (and funnily), this piece of code was actually harmless, since
setting the active layout would be overridden/redone later, in
`lib_link_windowmanager`, when updating their `workspace_hook` in
`lib_link_workspace_instance_hook`.
Note that the similar horror with `WorkSpaceDataRelation->parent` (which
points at a window) is kept for now, because that one is needed. Hope to
refactor it soon though.
Although I haven't seen this cause any visible errors, there is some
incorrect handling for setting panel expansion during search:
- Properly check if child panel is active first
- Don't stop traversal at headerless panels that could theoretically
have children
This is part of the Vulkan backend task T68990.
This is mostly a cleanup, however, there is a small change:
We don't use a special Vertex Array binding function for Immediate
anymore and just reuse the one for batches.
This might create a bit more state changes but this could be fixed
easily if it causes perf regression.
# Conflicts:
# source/blender/gpu/intern/gpu_context.cc
More localized variables, avoid ugly 'offset by one' index usage in
favor of explicit `INDEX_UNSET` define, etc.
No behavior change expected from this commit.
Checks to preserve the active spline on duplication
required an active vertex too.
Now having no active vertex doesn't prevent duplicate
from keeping the spline active.
Reviewed by: @mano-wii
Ref D8729
Gerneral rule of thumb: Don't delete user data without permission.
Data-blocks are a whole different and difficult story. Users may have
disabled just for a render, reloading the file shouldn't make their
settings go lost.
LANPR Patch
This is the patch for soc-2019-npr branch. Now modified as containing only LANPR changes
This patch **doesn't include** the following:
- GPencil modifiers.
- Smooth contour modifier.
- SVG.
- Affected UI scripts.
- Freestyle changes.
Those above will be submitted in other diffs.
Differential Revision: https://developer.blender.org/D5442
2019-11-15 11:46:33 +08:00
20 changed files with 336 additions and 159 deletions
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
