blender
/
blender
130
398
Fork 574
Code Issues 6.2k Pull Requests 751 Projects 19 Wiki Activity

Mesh: replace 'BKE_mesh_merge_verts' algorithm #105136

Merged
Germano Cavalcante merged 1 commits from mano-wii/blender:deduplicate_merge into main 2023-02-23 19:10:13 +01:00
Conversation 1 Commits 1 Files Changed 11 +118 -724
11 changed files with 118 additions and 724 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
source/blender/blenkernel/BKE_mesh.h
View File

@ -767,47 +767,6 @@ void BKE_mesh_polys_flip(const struct MPoly *mpoly,
struct CustomData *ldata,
int totpoly);
/* Merge verts. */
/* Enum for merge_mode of #BKE_mesh_merge_verts.
* Refer to mesh_merge.c for details. */
enum {
MESH_MERGE_VERTS_DUMP_IF_MAPPED,
MESH_MERGE_VERTS_DUMP_IF_EQUAL,
};
/**
* Merge Verts
*
* This frees the given mesh and returns a new mesh.
*
* \param vtargetmap: The table that maps vertices to target vertices. a value of -1
* indicates a vertex is a target, and is to be kept.
* This array is aligned with 'mesh->totvert'
* \warning \a vtargetmap must **not** contain any chained mapping (v1 -> v2 -> v3 etc.),
* this is not supported and will likely generate corrupted geometry.
*
* \param tot_vtargetmap: The number of non '-1' values in vtargetmap. (not the size)
*
* \param merge_mode: enum with two modes.
* - #MESH_MERGE_VERTS_DUMP_IF_MAPPED
* When called by the Mirror Modifier,
* In this mode it skips any faces that have all vertices merged (to avoid creating pairs
* of faces sharing the same set of vertices)
* - #MESH_MERGE_VERTS_DUMP_IF_EQUAL
* When called by the Array Modifier,
* In this mode, faces where all vertices are merged are double-checked,
* to see whether all target vertices actually make up a poly already.
* Indeed it could be that all of a poly's vertices are merged,
* but merged to vertices that do not make up a single poly,
* in which case the original poly should not be dumped.
* Actually this later behavior could apply to the Mirror Modifier as well,
* but the additional checks are costly and not necessary in the case of mirror,
* because each vertex is only merged to its own mirror.
*/
struct Mesh *BKE_mesh_merge_verts(struct Mesh *mesh,
const int *vtargetmap,
int tot_vtargetmap,
int merge_mode);
/**
* Account for custom-data such as UVs becoming detached because of imprecision
* in custom-data interpolation.

4
source/blender/blenkernel/BKE_mesh_mirror.h
View File

@ -35,7 +35,9 @@ struct Mesh *BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(struct MirrorModi
struct Object *ob,
const struct Mesh *mesh,
int axis,
bool use_correct_order_on_merge);
bool use_correct_order_on_merge,
int **r_vert_merge_map,
int *r_vert_merge_map_len);
#ifdef __cplusplus
}

1
source/blender/blenkernel/CMakeLists.txt
View File

@ -201,7 +201,6 @@ set(SRC
intern/mesh_iterators.cc
intern/mesh_legacy_convert.cc
intern/mesh_mapping.cc
intern/mesh_merge.c
intern/mesh_merge_customdata.cc
intern/mesh_mirror.cc
intern/mesh_normals.cc

644
source/blender/blenkernel/intern/mesh_merge.c
View File

@ -1,644 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-or-later
* Copyright 2001-2002 NaN Holding BV. All rights reserved. */
/** \file
* \ingroup bke
*/
#include <string.h> /* for memcpy */
#include "MEM_guardedalloc.h"
#include "DNA_mesh_types.h"
#include "DNA_meshdata_types.h"
#include "BLI_bitmap.h"
#include "BLI_edgehash.h"
#include "BLI_ghash.h"
#include "BLI_math_vector.h"
#include "BLI_utildefines.h"
#include "BLI_utildefines_stack.h"
#include "BKE_customdata.h"
#include "BKE_lib_id.h"
#include "BKE_mesh.h"
#include "BKE_mesh_mapping.h"
/**
* Poly compare with vtargetmap
* Function used by #BKE_mesh_merge_verts.
* The function compares poly_source after applying vtargetmap, with poly_target.
* The two polys are identical if they share the same vertices in the same order,
* or in reverse order, but starting position loopstart may be different.
* The function is called with direct_reverse=1 for same order (i.e. same normal),
* and may be called again with direct_reverse=-1 for reverse order.
* \return 1 if polys are identical, 0 if polys are different.
*/
static int cddm_poly_compare(const MLoop *mloop_array,
const MPoly *mpoly_source,
const MPoly *mpoly_target,
const int *vtargetmap,
const int direct_reverse)
{
int vert_source, first_vert_source, vert_target;
int i_loop_source;
int i_loop_target, i_loop_target_start, i_loop_target_offset, i_loop_target_adjusted;
bool compare_completed = false;
bool same_loops = false;
const MLoop *mloop_source, *mloop_target;
BLI_assert(ELEM(direct_reverse, 1, -1));
i_loop_source = 0;
mloop_source = mloop_array + mpoly_source->loopstart;
vert_source = mloop_source->v;
if (vtargetmap[vert_source] != -1) {
vert_source = vtargetmap[vert_source];
}
else {
/* All source loop vertices should be mapped */
BLI_assert(false);
}
/* Find same vertex within mpoly_target's loops */
mloop_target = mloop_array + mpoly_target->loopstart;
for (i_loop_target = 0; i_loop_target < mpoly_target->totloop; i_loop_target++, mloop_target++) {
if (mloop_target->v == vert_source) {
break;
}
}
/* If same vertex not found, then polys cannot be equal */
if (i_loop_target >= mpoly_target->totloop) {
return false;
}
/* Now mloop_source and m_loop_target have one identical vertex */
/* mloop_source is at position 0, while m_loop_target has advanced to find identical vertex */
/* Go around the loop and check that all vertices match in same order */
/* Skipping source loops when consecutive source vertices are mapped to same target vertex */
i_loop_target_start = i_loop_target;
i_loop_target_offset = 0;
first_vert_source = vert_source;
compare_completed = false;
same_loops = false;
while (!compare_completed) {
vert_target = mloop_target->v;
/* First advance i_loop_source, until it points to different vertex, after mapping applied */
do {
i_loop_source++;
if (i_loop_source == mpoly_source->totloop) {
/* End of loops for source, must match end of loop for target. */
if (i_loop_target_offset == mpoly_target->totloop - 1) {
compare_completed = true;
same_loops = true;
break; /* Polys are identical */
}
compare_completed = true;
same_loops = false;
break; /* Polys are different */
}
mloop_source++;
vert_source = mloop_source->v;
if (vtargetmap[vert_source] != -1) {
vert_source = vtargetmap[vert_source];
}
else {
/* All source loop vertices should be mapped */
BLI_assert(false);
}
} while (vert_source == vert_target);
if (compare_completed) {
break;
}
/* Now advance i_loop_target as well */
i_loop_target_offset++;
if (i_loop_target_offset == mpoly_target->totloop) {
/* End of loops for target only, that means no match */
/* except if all remaining source vertices are mapped to first target */
for (; i_loop_source < mpoly_source->totloop; i_loop_source++, mloop_source++) {
vert_source = vtargetmap[mloop_source->v];
if (vert_source != first_vert_source) {
compare_completed = true;
same_loops = false;
break;
}
}
if (!compare_completed) {
same_loops = true;
}
break;
}
/* Adjust i_loop_target for cycling around and for direct/reverse order
* defined by delta = +1 or -1 */
i_loop_target_adjusted = (i_loop_target_start + direct_reverse * i_loop_target_offset) %
mpoly_target->totloop;
if (i_loop_target_adjusted < 0) {
i_loop_target_adjusted += mpoly_target->totloop;
}
mloop_target = mloop_array + mpoly_target->loopstart + i_loop_target_adjusted;
vert_target = mloop_target->v;
if (vert_target != vert_source) {
same_loops = false; /* Polys are different */
break;
}
}
return same_loops;
}
/* Utility stuff for using GHash with polys, used by vertex merging. */
typedef struct PolyKey {
int poly_index; /* index of the MPoly within the derived mesh */
int totloops; /* number of loops in the poly */
uint hash_sum; /* Sum of all vertices indices */
uint hash_xor; /* Xor of all vertices indices */
} PolyKey;
static uint poly_gset_hash_fn(const void *key)
{
const PolyKey *pk = key;
return pk->hash_sum;
}
static bool poly_gset_compare_fn(const void *k1, const void *k2)
{
const PolyKey *pk1 = k1;
const PolyKey *pk2 = k2;
if ((pk1->hash_sum == pk2->hash_sum) && (pk1->hash_xor == pk2->hash_xor) &&
(pk1->totloops == pk2->totloops)) {
/* Equality - note that this does not mean equality of polys */
return false;
}
return true;
}
Mesh *BKE_mesh_merge_verts(Mesh *mesh,
const int *vtargetmap,
const int tot_vtargetmap,
const int merge_mode)
{
/* This was commented out back in 2013, see commit f45d8827bafe6b9eaf9de42f4054e9d84a21955d. */
// #define USE_LOOPS
Mesh *result = NULL;
const int totvert = mesh->totvert;
const int totedge = mesh->totedge;
const int totloop = mesh->totloop;
const int totpoly = mesh->totpoly;
const MEdge *src_edges = BKE_mesh_edges(mesh);
const MPoly *src_polys = BKE_mesh_polys(mesh);
const MLoop *src_loops = BKE_mesh_loops(mesh);
const int totvert_final = totvert - tot_vtargetmap;
int *oldv = MEM_malloc_arrayN(totvert_final, sizeof(*oldv), __func__);
int *newv = MEM_malloc_arrayN(totvert, sizeof(*newv), __func__);
STACK_DECLARE(oldv);
/* NOTE: create (totedge + totloop) elements because partially invalid polys due to merge may
* require generating new edges, and while in 99% cases we'll still end with less final edges
* than totedge, cases can be forged that would end requiring more. */
const MEdge *med;
MEdge *medge = MEM_malloc_arrayN((totedge + totloop), sizeof(*medge), __func__);
int *olde = MEM_malloc_arrayN((totedge + totloop), sizeof(*olde), __func__);
int *newe = MEM_malloc_arrayN((totedge + totloop), sizeof(*newe), __func__);
STACK_DECLARE(medge);
STACK_DECLARE(olde);
const MLoop *ml;
MLoop *mloop = MEM_malloc_arrayN(totloop, sizeof(*mloop), __func__);
int *oldl = MEM_malloc_arrayN(totloop, sizeof(*oldl), __func__);
#ifdef USE_LOOPS
int *newl = MEM_malloc_arrayN(totloop, sizeof(*newl), __func__);
#endif
STACK_DECLARE(mloop);
STACK_DECLARE(oldl);
const MPoly *mp;
MPoly *mpoly = MEM_malloc_arrayN(totpoly, sizeof(*medge), __func__);
int *oldp = MEM_malloc_arrayN(totpoly, sizeof(*oldp), __func__);
STACK_DECLARE(mpoly);
STACK_DECLARE(oldp);
EdgeHash *ehash = BLI_edgehash_new_ex(__func__, totedge);
int i, j, c;
PolyKey *poly_keys;
GSet *poly_gset = NULL;
MeshElemMap *poly_map = NULL;
int *poly_map_mem = NULL;
STACK_INIT(oldv, totvert_final);
STACK_INIT(olde, totedge);
STACK_INIT(oldl, totloop);
STACK_INIT(oldp, totpoly);
STACK_INIT(medge, totedge);
STACK_INIT(mloop, totloop);
STACK_INIT(mpoly, totpoly);
/* fill newv with destination vertex indices */
c = 0;
for (i = 0; i < totvert; i++) {
if (vtargetmap[i] == -1) {
STACK_PUSH(oldv, i);
newv[i] = c++;
}
else {
/* dummy value */
newv[i] = 0;
}
}
/* now link target vertices to destination indices */
for (i = 0; i < totvert; i++) {
if (vtargetmap[i] != -1) {
newv[i] = newv[vtargetmap[i]];
}
}
/* Don't remap vertices in cddm->mloop, because we need to know the original
* indices in order to skip faces with all vertices merged.
* The "update loop indices..." section further down remaps vertices in mloop.
*/
/* now go through and fix edges and faces */
med = src_edges;
c = 0;
for (i = 0; i < totedge; i++, med++) {
const uint v1 = (vtargetmap[med->v1] != -1) ? vtargetmap[med->v1] : med->v1;
const uint v2 = (vtargetmap[med->v2] != -1) ? vtargetmap[med->v2] : med->v2;
if (LIKELY(v1 != v2)) {
void **val_p;
if (BLI_edgehash_ensure_p(ehash, v1, v2, &val_p)) {
newe[i] = POINTER_AS_INT(*val_p);
}
else {
STACK_PUSH(olde, i);
STACK_PUSH(medge, *med);
newe[i] = c;
*val_p = POINTER_FROM_INT(c);
c++;
}
}
else {
newe[i] = -1;
}
}
if (merge_mode == MESH_MERGE_VERTS_DUMP_IF_EQUAL) {
/* In this mode, we need to determine, whenever a poly' vertices are all mapped */
/* if the targets already make up a poly, in which case the new poly is dropped */
/* This poly equality check is rather complex.
* We use a BLI_ghash to speed it up with a first level check */
PolyKey *mpgh;
poly_keys = MEM_malloc_arrayN(totpoly, sizeof(PolyKey), __func__);
poly_gset = BLI_gset_new_ex(poly_gset_hash_fn, poly_gset_compare_fn, __func__, totpoly);
/* Duplicates allowed because our compare function is not pure equality */
BLI_gset_flag_set(poly_gset, GHASH_FLAG_ALLOW_DUPES);
mp = src_polys;
mpgh = poly_keys;
for (i = 0; i < totpoly; i++, mp++, mpgh++) {
mpgh->poly_index = i;
mpgh->totloops = mp->totloop;
ml = src_loops + mp->loopstart;
mpgh->hash_sum = mpgh->hash_xor = 0;
for (j = 0; j < mp->totloop; j++, ml++) {
mpgh->hash_sum += ml->v;
mpgh->hash_xor ^= ml->v;
}
BLI_gset_insert(poly_gset, mpgh);
}
/* Can we optimize by reusing an old `pmap`? How do we know an old `pmap` is stale? */
/* When called by `MOD_array.c` the `cddm` has just been created, so it has no valid `pmap`. */
BKE_mesh_vert_poly_map_create(
&poly_map, &poly_map_mem, src_polys, src_loops, totvert, totpoly, totloop);
} /* done preparing for fast poly compare */
BLI_bitmap *vert_tag = BLI_BITMAP_NEW(mesh->totvert, __func__);
mp = src_polys;
for (i = 0; i < totpoly; i++, mp++) {
MPoly *mp_new;
ml = src_loops + mp->loopstart;
/* check faces with all vertices merged */
bool all_verts_merged = true;
for (j = 0; j < mp->totloop; j++, ml++) {
if (vtargetmap[ml->v] == -1) {
all_verts_merged = false;
/* This will be used to check for poly using several time the same vert. */
BLI_BITMAP_DISABLE(vert_tag, ml->v);
}
else {
/* This will be used to check for poly using several time the same vert. */
BLI_BITMAP_DISABLE(vert_tag, vtargetmap[ml->v]);
}
}
if (UNLIKELY(all_verts_merged)) {
if (merge_mode == MESH_MERGE_VERTS_DUMP_IF_MAPPED) {
/* In this mode, all vertices merged is enough to dump face */
continue;
}
if (merge_mode == MESH_MERGE_VERTS_DUMP_IF_EQUAL) {
/* Additional condition for face dump: target vertices must make up an identical face.
* The test has 2 steps:
* 1) first step is fast `ghash` lookup, but not fail-proof.
* 2) second step is thorough but more costly poly compare. */
int i_poly, v_target;
bool found = false;
PolyKey pkey;
/* Use poly_gset for fast (although not 100% certain) identification of same poly */
/* First, make up a poly_summary structure */
ml = src_loops + mp->loopstart;
pkey.hash_sum = pkey.hash_xor = 0;
pkey.totloops = 0;
for (j = 0; j < mp->totloop; j++, ml++) {
v_target = vtargetmap[ml->v]; /* Cannot be -1, they are all mapped */
pkey.hash_sum += v_target;
pkey.hash_xor ^= v_target;
pkey.totloops++;
}
if (BLI_gset_haskey(poly_gset, &pkey)) {
/* There might be a poly that matches this one.
* We could just leave it there and say there is, and do a "continue".
* ... but we are checking whether there is an exact poly match.
* It's not so costly in terms of CPU since it's very rare, just a lot of complex code.
*/
/* Consider current loop again */
ml = src_loops + mp->loopstart;
/* Consider the target of the loop's first vert */
v_target = vtargetmap[ml->v];
/* Now see if v_target belongs to a poly that shares all vertices with source poly,
* in same order, or reverse order */
for (i_poly = 0; i_poly < poly_map[v_target].count; i_poly++) {
const MPoly *target_poly = src_polys + *(poly_map[v_target].indices + i_poly);
if (cddm_poly_compare(src_loops, mp, target_poly, vtargetmap, +1) ||
cddm_poly_compare(src_loops, mp, target_poly, vtargetmap, -1)) {
found = true;
break;
}
}
if (found) {
/* Current poly's vertices are mapped to a poly that is strictly identical */
/* Current poly is dumped */
continue;
}
}
}
}
/* Here either the poly's vertices were not all merged
* or they were all merged, but targets do not make up an identical poly,
* the poly is retained.
*/
ml = src_loops + mp->loopstart;
c = 0;
MLoop *last_valid_ml = NULL;
MLoop *first_valid_ml = NULL;
bool need_edge_from_last_valid_ml = false;
bool need_edge_to_first_valid_ml = false;
int created_edges = 0;
for (j = 0; j < mp->totloop; j++, ml++) {
const uint mlv = (vtargetmap[ml->v] != -1) ? vtargetmap[ml->v] : ml->v;
#ifndef NDEBUG
{
const MLoop *next_ml = src_loops + mp->loopstart + ((j + 1) % mp->totloop);
uint next_mlv = (vtargetmap[next_ml->v] != -1) ? vtargetmap[next_ml->v] : next_ml->v;
med = src_edges + ml->e;
uint v1 = (vtargetmap[med->v1] != -1) ? vtargetmap[med->v1] : med->v1;
uint v2 = (vtargetmap[med->v2] != -1) ? vtargetmap[med->v2] : med->v2;
BLI_assert((mlv == v1 && next_mlv == v2) || (mlv == v2 && next_mlv == v1));
}
#endif
/* A loop is only valid if its matching edge is,
* and it's not reusing a vertex already used by this poly. */
if (LIKELY((newe[ml->e] != -1) && !BLI_BITMAP_TEST(vert_tag, mlv))) {
BLI_BITMAP_ENABLE(vert_tag, mlv);
if (UNLIKELY(last_valid_ml != NULL && need_edge_from_last_valid_ml)) {
/* We need to create a new edge between last valid loop and this one! */
void **val_p;
uint v1 = (vtargetmap[last_valid_ml->v] != -1) ? vtargetmap[last_valid_ml->v] :
last_valid_ml->v;
uint v2 = mlv;
BLI_assert(v1 != v2);
if (BLI_edgehash_ensure_p(ehash, v1, v2, &val_p)) {
last_valid_ml->e = POINTER_AS_INT(*val_p);
}
else {
const int new_eidx = STACK_SIZE(medge);
STACK_PUSH(olde, olde[last_valid_ml->e]);
STACK_PUSH(medge, src_edges[last_valid_ml->e]);
medge[new_eidx].v1 = last_valid_ml->v;
medge[new_eidx].v2 = ml->v;
/* DO NOT change newe mapping,
* could break actual values due to some deleted original edges. */
*val_p = POINTER_FROM_INT(new_eidx);
created_edges++;
last_valid_ml->e = new_eidx;
}
need_edge_from_last_valid_ml = false;
}
#ifdef USE_LOOPS
newl[j + mp->loopstart] = STACK_SIZE(mloop);
#endif
STACK_PUSH(oldl, j + mp->loopstart);
last_valid_ml = STACK_PUSH_RET_PTR(mloop);
*last_valid_ml = *ml;
if (first_valid_ml == NULL) {
first_valid_ml = last_valid_ml;
}
c++;
/* We absolutely HAVE to handle edge index remapping here, otherwise potential newly
* created edges in that part of code make remapping later totally unreliable. */
BLI_assert(newe[ml->e] != -1);
last_valid_ml->e = newe[ml->e];
}
else {
if (last_valid_ml != NULL) {
need_edge_from_last_valid_ml = true;
}
else {
need_edge_to_first_valid_ml = true;
}
}
}
if (UNLIKELY(last_valid_ml != NULL && !ELEM(first_valid_ml, NULL, last_valid_ml) &&
(need_edge_to_first_valid_ml || need_edge_from_last_valid_ml))) {
/* We need to create a new edge between last valid loop and first valid one! */
void **val_p;
uint v1 = (vtargetmap[last_valid_ml->v] != -1) ? vtargetmap[last_valid_ml->v] :
last_valid_ml->v;
uint v2 = (vtargetmap[first_valid_ml->v] != -1) ? vtargetmap[first_valid_ml->v] :
first_valid_ml->v;
BLI_assert(v1 != v2);
if (BLI_edgehash_ensure_p(ehash, v1, v2, &val_p)) {
last_valid_ml->e = POINTER_AS_INT(*val_p);
}
else {
const int new_eidx = STACK_SIZE(medge);
STACK_PUSH(olde, olde[last_valid_ml->e]);
STACK_PUSH(medge, src_edges[last_valid_ml->e]);
medge[new_eidx].v1 = last_valid_ml->v;
medge[new_eidx].v2 = first_valid_ml->v;
/* DO NOT change newe mapping,
* could break actual values due to some deleted original edges. */
*val_p = POINTER_FROM_INT(new_eidx);
created_edges++;
last_valid_ml->e = new_eidx;
}
need_edge_to_first_valid_ml = need_edge_from_last_valid_ml = false;
}
if (UNLIKELY(c == 0)) {
BLI_assert(created_edges == 0);
continue;
}
if (UNLIKELY(c < 3)) {
STACK_DISCARD(oldl, c);
STACK_DISCARD(mloop, c);
if (created_edges > 0) {
for (j = STACK_SIZE(medge) - created_edges; j < STACK_SIZE(medge); j++) {
BLI_edgehash_remove(ehash, medge[j].v1, medge[j].v2, NULL);
}
STACK_DISCARD(olde, created_edges);
STACK_DISCARD(medge, created_edges);
}
continue;
}
mp_new = STACK_PUSH_RET_PTR(mpoly);
*mp_new = *mp;
mp_new->totloop = c;
BLI_assert(mp_new->totloop >= 3);
mp_new->loopstart = STACK_SIZE(mloop) - c;
STACK_PUSH(oldp, i);
} /* End of the loop that tests polys. */
if (poly_gset) {
// printf("hash quality %.6f\n", BLI_gset_calc_quality(poly_gset));
BLI_gset_free(poly_gset, NULL);
MEM_freeN(poly_keys);
}
/* Create new cddm. */
result = BKE_mesh_new_nomain_from_template(
mesh, totvert_final, STACK_SIZE(medge), 0, STACK_SIZE(mloop), STACK_SIZE(mpoly));
/* Update edge indices and copy customdata. */
MEdge *new_med = medge;
for (i = 0; i < result->totedge; i++, new_med++) {
BLI_assert(newv[new_med->v1] != -1);
new_med->v1 = newv[new_med->v1];
BLI_assert(newv[new_med->v2] != -1);
new_med->v2 = newv[new_med->v2];
/* Can happen in case vtargetmap contains some double chains, we do not support that. */
BLI_assert(new_med->v1 != new_med->v2);
CustomData_copy_data(&mesh->edata, &result->edata, olde[i], i, 1);
}
/* Update loop indices and copy customdata. */
MLoop *new_ml = mloop;
for (i = 0; i < result->totloop; i++, new_ml++) {
/* Edge remapping has already be done in main loop handling part above. */
BLI_assert(newv[new_ml->v] != -1);
new_ml->v = newv[new_ml->v];
CustomData_copy_data(&mesh->ldata, &result->ldata, oldl[i], i, 1);
}
/* Copy vertex customdata. */
for (i = 0; i < result->totvert; i++) {
CustomData_copy_data(&mesh->vdata, &result->vdata, oldv[i], i, 1);
}
/* Copy poly customdata. */
mp = mpoly;
for (i = 0; i < result->totpoly; i++, mp++) {
CustomData_copy_data(&mesh->pdata, &result->pdata, oldp[i], i, 1);
}
/* Copy over data. #CustomData_add_layer can do this, need to look it up. */
if (STACK_SIZE(medge)) {
memcpy(BKE_mesh_edges_for_write(result), medge, sizeof(MEdge) * STACK_SIZE(medge));
}
if (STACK_SIZE(mloop)) {
memcpy(BKE_mesh_loops_for_write(result), mloop, sizeof(MLoop) * STACK_SIZE(mloop));
}
if (STACK_SIZE(mpoly)) {
memcpy(BKE_mesh_polys_for_write(result), mpoly, sizeof(MPoly) * STACK_SIZE(mpoly));
}
MEM_freeN(medge);
MEM_freeN(mloop);
MEM_freeN(mpoly);
MEM_freeN(newv);
MEM_freeN(newe);
#ifdef USE_LOOPS
MEM_freeN(newl);
#endif
MEM_freeN(oldv);
MEM_freeN(olde);
MEM_freeN(oldl);
MEM_freeN(oldp);
MEM_freeN(vert_tag);
BLI_edgehash_free(ehash, NULL);
if (poly_map != NULL) {
MEM_freeN(poly_map);
}
if (poly_map_mem != NULL) {
MEM_freeN(poly_map_mem);
}
BKE_id_free(NULL, mesh);
return result;
}

37
source/blender/blenkernel/intern/mesh_mirror.cc
View File

@ -115,11 +115,12 @@ Mesh *BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(MirrorModifierData *mmd,
Object *ob,
const Mesh *mesh,
const int axis,
const bool use_correct_order_on_merge)
const bool use_correct_order_on_merge,
int **r_vert_merge_map,
int *r_vert_merge_map_len)
{
const float tolerance_sq = mmd->tolerance * mmd->tolerance;
const bool do_vtargetmap = (mmd->flag & MOD_MIR_NO_MERGE) == 0;
int tot_vtargetmap = 0; /* total merge vertices */
const bool do_vtargetmap = (mmd->flag & MOD_MIR_NO_MERGE) == 0 && r_vert_merge_map != nullptr;
const bool do_bisect = ((axis == 0 && mmd->flag & MOD_MIR_BISECT_AXIS_X) ||
(axis == 1 && mmd->flag & MOD_MIR_BISECT_AXIS_Y) ||
@ -133,7 +134,7 @@ Mesh *BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(MirrorModifierData *mmd,
float plane_co[3], plane_no[3];
int i;
int a, totshape;
int *vtargetmap = nullptr, *vtmap_a = nullptr, *vtmap_b = nullptr;
int *vtmap_a = nullptr, *vtmap_b = nullptr;
/* mtx is the mirror transformation */
unit_m4(mtx);
@ -211,11 +212,13 @@ Mesh *BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(MirrorModifierData *mmd,
if (do_vtargetmap) {
/* second half is filled with -1 */
vtargetmap = static_cast<int *>(
*r_vert_merge_map = static_cast<int *>(
MEM_malloc_arrayN(maxVerts, sizeof(int[2]), "MOD_mirror tarmap"));
vtmap_a = vtargetmap;
vtmap_b = vtargetmap + maxVerts;
vtmap_a = *r_vert_merge_map;
vtmap_b = *r_vert_merge_map + maxVerts;
*r_vert_merge_map_len = 0;
}
/* mirror vertex coordinates */
@ -243,7 +246,7 @@ Mesh *BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(MirrorModifierData *mmd,
if (UNLIKELY(len_squared_v3v3(positions[vert_index_prev], positions[vert_index]) <
tolerance_sq)) {
*vtmap_b = i;
tot_vtargetmap++;
(*r_vert_merge_map_len)++;
/* average location */
mid_v3_v3v3(positions[vert_index], positions[vert_index_prev], positions[vert_index]);
@ -260,7 +263,7 @@ Mesh *BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(MirrorModifierData *mmd,
if (UNLIKELY(len_squared_v3v3(positions[vert_index_prev], positions[vert_index]) <
tolerance_sq)) {
*vtmap_a = maxVerts + i;
tot_vtargetmap++;
(*r_vert_merge_map_len)++;
/* average location */
mid_v3_v3v3(positions[vert_index], positions[vert_index_prev], positions[vert_index]);
@ -445,10 +448,12 @@ Mesh *BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(MirrorModifierData *mmd,
if (flip_map) {
for (i = 0; i < maxVerts; dvert++, i++) {
/* merged vertices get both groups, others get flipped */
if (use_correct_order_on_merge && do_vtargetmap && (vtargetmap[i + maxVerts] != -1)) {
if (use_correct_order_on_merge && do_vtargetmap &&
((*r_vert_merge_map)[i + maxVerts] != -1)) {
BKE_defvert_flip_merged(dvert - maxVerts, flip_map, flip_map_len);
}
else if (!use_correct_order_on_merge && do_vtargetmap && (vtargetmap[i] != -1)) {
else if (!use_correct_order_on_merge && do_vtargetmap &&
((*r_vert_merge_map)[i] != -1)) {
BKE_defvert_flip_merged(dvert, flip_map, flip_map_len);
}
else {
@ -461,16 +466,6 @@ Mesh *BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(MirrorModifierData *mmd,
}
}
if (do_vtargetmap) {
/* slow - so only call if one or more merge verts are found,
* users may leave this on and not realize there is nothing to merge - campbell */
if (tot_vtargetmap) {
result = BKE_mesh_merge_verts(
result, vtargetmap, tot_vtargetmap, MESH_MERGE_VERTS_DUMP_IF_MAPPED);
}
MEM_freeN(vtargetmap);
}
if (mesh_bisect != nullptr) {
BKE_id_free(nullptr, mesh_bisect);
}

2
source/blender/editors/object/object_remesh.cc
View File

@ -819,7 +819,7 @@ static Mesh *remesh_symmetry_mirror(Object *ob, Mesh *mesh, eSymmetryAxes symmet
mmd.flag &= MOD_MIR_AXIS_X << i;
mesh_mirror_temp = mesh_mirror;
mesh_mirror = BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(
&mmd, ob, mesh_mirror, axis, true);
&mmd, ob, mesh_mirror, axis, true, nullptr, nullptr);
if (mesh_mirror_temp != mesh_mirror) {
BKE_id_free(nullptr, mesh_mirror_temp);
}

15
source/blender/geometry/GEO_mesh_merge_by_distance.hh
View File

@ -38,4 +38,19 @@ std::optional<Mesh *> mesh_merge_by_distance_connected(const Mesh &mesh,
float merge_distance,
bool only_loose_edges);
/**
* Merge Verts indicated in the targets map.
*
* This frees the given mesh and returns a new mesh.
*
* \param vert_dest_map: The table that maps vertices to target vertices. a value of -1
* indicates a vertex is a target, and is to be kept.
* This array is aligned with 'mesh->totvert'
* \warning \a vert_merge_map must **not** contain any chained mapping (v1 -> v2 -> v3 etc.),
* this is not supported and will likely generate corrupted geometry.
*
* \param vert_dest_map_len: The number of non '-1' values in vtargetmap. (not the size)
*/
Mesh *mesh_merge_verts(const Mesh &mesh, MutableSpan<int> vert_dest_map, int vert_dest_map_len);
} // namespace blender::geometry

19
source/blender/geometry/intern/mesh_merge_by_distance.cc
View File

@ -308,7 +308,7 @@ static void weld_assert_poly_len(const WeldPoly *wp, const Span<WeldLoop> wloop)
*
* \return array with the context weld vertices.
*/
static Vector<WeldVert> weld_vert_ctx_alloc_and_setup(Span<int> vert_dest_map,
static Vector<WeldVert> weld_vert_ctx_alloc_and_setup(MutableSpan<int> vert_dest_map,
const int vert_kill_len)
{
Vector<WeldVert> wvert;
@ -316,10 +316,20 @@ static Vector<WeldVert> weld_vert_ctx_alloc_and_setup(Span<int> vert_dest_map,
for (const int i : vert_dest_map.index_range()) {
if (vert_dest_map[i] != OUT_OF_CONTEXT) {
const int vert_dest = vert_dest_map[i];
WeldVert wv{};
wv.vert_dest = vert_dest_map[i];
wv.vert_dest = vert_dest;
wv.vert_orig = i;
wvert.append(wv);
if (vert_dest_map[vert_dest] != vert_dest) {
/* The target vertex is also part of the context and needs to be referenced.
* #vert_dest_map could already indicate this from the beginning, but for better
* compatibility, it is done here as well. */
vert_dest_map[vert_dest] = vert_dest;
wv.vert_orig = vert_dest;
wvert.append(wv);
}
}
}
return wvert;
@ -1815,6 +1825,11 @@ std::optional<Mesh *> mesh_merge_by_distance_connected(const Mesh &mesh,
return create_merged_mesh(mesh, vert_dest_map, vert_kill_len);
}
Mesh *mesh_merge_verts(const Mesh &mesh, MutableSpan<int> vert_dest_map, int vert_dest_map_len)
{
return create_merged_mesh(mesh, vert_dest_map, vert_dest_map_len);
}
/** \} */
} // namespace blender::geometry

13
source/blender/modifiers/intern/MOD_array.cc
View File

@ -12,6 +12,7 @@
#include "BLI_utildefines.h"
#include "BLI_math.h"
#include "BLI_span.hh"
#include "BLT_translation.h"
@ -46,6 +47,10 @@
#include "DEG_depsgraph.h"
#include "DEG_depsgraph_query.h"
#include "GEO_mesh_merge_by_distance.hh"
using namespace blender;
static void initData(ModifierData *md)
{
ArrayModifierData *amd = (ArrayModifierData *)md;
@ -756,7 +761,7 @@ static Mesh *arrayModifier_doArray(ArrayModifierData *amd,
if (new_i != -1) {
/* We have to follow chains of doubles
* (merge start/end especially is likely to create some),
* those are not supported at all by BKE_mesh_merge_verts! */
* those are not supported at all by `geometry::mesh_merge_verts`! */
while (!ELEM(full_doubles_map[new_i], -1, new_i)) {
new_i = full_doubles_map[new_i];
}
@ -770,8 +775,10 @@ static Mesh *arrayModifier_doArray(ArrayModifierData *amd,
}
}
if (tot_doubles > 0) {
result = BKE_mesh_merge_verts(
result, full_doubles_map, tot_doubles, MESH_MERGE_VERTS_DUMP_IF_EQUAL);
Mesh *tmp = result;
result = geometry::mesh_merge_verts(
*tmp, MutableSpan<int>{full_doubles_map, result->totvert}, tot_doubles);
BKE_id_free(NULL, tmp);
}
MEM_freeN(full_doubles_map);
}

46
source/blender/modifiers/intern/MOD_mirror.cc
View File

@ -5,6 +5,9 @@
* \ingroup modifiers
*/
#include "BLI_math.h"
#include "BLI_span.hh"
#include "BLT_translation.h"
#include "DNA_defaults.h"
@ -33,6 +36,10 @@
#include "MOD_modifiertypes.h"
#include "MOD_ui_common.h"
#include "GEO_mesh_merge_by_distance.hh"
using namespace blender;
static void initData(ModifierData *md)
{
MirrorModifierData *mmd = (MirrorModifierData *)md;
@ -58,6 +65,36 @@ static void updateDepsgraph(ModifierData *md, const ModifierUpdateDepsgraphConte
}
}
static Mesh *mirror_apply_on_axis(MirrorModifierData *mmd,
Object *ob,
Mesh *mesh,
const int axis,
const bool use_correct_order_on_merge)
{
int *vert_merge_map = nullptr;
int vert_merge_map_len;
Mesh *result = mesh;
result = BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(
mmd, ob, result, axis, use_correct_order_on_merge, &vert_merge_map, &vert_merge_map_len);
if (vert_merge_map) {
/* Slow - so only call if one or more merge verts are found,
* users may leave this on and not realize there is nothing to merge - campbell */
/* TODO(mano-wii): Polygons with all vertices merged are the ones that form duplicates.
* Therefore the duplicate polygon test can be skipped. */
if (vert_merge_map_len) {
Mesh *tmp = result;
result = geometry::mesh_merge_verts(
*tmp, MutableSpan<int>{vert_merge_map, result->totvert}, vert_merge_map_len);
BKE_id_free(NULL, tmp);
}
MEM_freeN(vert_merge_map);
}
return result;
}
static Mesh *mirrorModifier__doMirror(MirrorModifierData *mmd, Object *ob, Mesh *mesh)
{
Mesh *result = mesh;
@ -65,13 +102,11 @@ static Mesh *mirrorModifier__doMirror(MirrorModifierData *mmd, Object *ob, Mesh
/* check which axes have been toggled and mirror accordingly */
if (mmd->flag & MOD_MIR_AXIS_X) {
result = BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(
mmd, ob, result, 0, use_correct_order_on_merge);
result = mirror_apply_on_axis(mmd, ob, result, 0, use_correct_order_on_merge);
}
if (mmd->flag & MOD_MIR_AXIS_Y) {
Mesh *tmp = result;
result = BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(
mmd, ob, result, 1, use_correct_order_on_merge);
result = mirror_apply_on_axis(mmd, ob, result, 1, use_correct_order_on_merge);
if (tmp != mesh) {
/* free intermediate results */
BKE_id_free(nullptr, tmp);
@ -79,8 +114,7 @@ static Mesh *mirrorModifier__doMirror(MirrorModifierData *mmd, Object *ob, Mesh
}
if (mmd->flag & MOD_MIR_AXIS_Z) {
Mesh *tmp = result;
result = BKE_mesh_mirror_apply_mirror_on_axis_for_modifier(
mmd, ob, result, 2, use_correct_order_on_merge);
result = mirror_apply_on_axis(mmd, ob, result, 2, use_correct_order_on_merge);
if (tmp != mesh) {
/* free intermediate results */
BKE_id_free(nullptr, tmp);

20
source/blender/modifiers/intern/MOD_screw.cc
View File

@ -12,6 +12,7 @@
#include "BLI_bitmap.h"
#include "BLI_math.h"
#include "BLI_span.hh"
#include "BLT_translation.h"
@ -22,6 +23,7 @@
#include "DNA_screen_types.h"
#include "BKE_context.h"
#include "BKE_lib_id.h"
#include "BKE_lib_query.h"
#include "BKE_mesh.h"
#include "BKE_screen.h"
@ -42,6 +44,10 @@
#include "BLI_strict_flags.h"
#include "GEO_mesh_merge_by_distance.hh"
using namespace blender;
static void initData(ModifierData *md)
{
ScrewModifierData *ltmd = (ScrewModifierData *)md;
@ -165,10 +171,16 @@ static Mesh *mesh_remove_doubles_on_axis(Mesh *result,
}
}
}
result = BKE_mesh_merge_verts(result,
full_doubles_map,
int(tot_doubles * (step_tot - 1)),
MESH_MERGE_VERTS_DUMP_IF_MAPPED);
Mesh *tmp = result;
/* TODO(mano-wii): Polygons with all vertices merged are the ones that form duplicates.
* Therefore the duplicate polygon test can be skipped. */
result = geometry::mesh_merge_verts(*tmp,
MutableSpan<int>{full_doubles_map, result->totvert},
int(tot_doubles * (step_tot - 1)));
BKE_id_free(NULL, tmp);
MEM_freeN(full_doubles_map);
}