source/blender/blenkernel/intern/data_transfer.cc

@@ -1447,22 +1447,22 @@ bool BKE_object_data_transfer_ex(Depsgraph *depsgraph,
         if ((map_vert_mode == MREMAP_MODE_TOPOLOGY) && (num_verts_dst != num_verts_src)) {
           BKE_report(reports,
                      RPT_ERROR,
-                     "Source and destination meshes do not have the same amount of vertices, "
+                     "Source and destination meshes do not have the same number of vertices, "
                      "'Topology' mapping cannot be used in this case");
           continue;
         }
         if ((map_vert_mode & MREMAP_USE_EDGE) && (me_src->totedge == 0)) {
           BKE_report(reports,
                      RPT_ERROR,
-                     "Source mesh doesn't have any edges, "
-                     "None of the 'Edge' mappings can be used in this case");
+                     "Source mesh does not have any edges, "
+                     "none of the 'Edge' mappings can be used in this case");
           continue;
         }
         if ((map_vert_mode & MREMAP_USE_POLY) && (me_src->faces_num == 0)) {
           BKE_report(reports,
                      RPT_ERROR,
-                     "Source mesh doesn't have any faces, "
-                     "None of the 'Face' mappings can be used in this case");
+                     "Source mesh does not have any faces, "
+                     "none of the 'Face' mappings can be used in this case");
           continue;
         }
         if (ELEM(0, num_verts_dst, num_verts_src)) {
@@ -1532,15 +1532,15 @@ bool BKE_object_data_transfer_ex(Depsgraph *depsgraph,
         if ((map_edge_mode == MREMAP_MODE_TOPOLOGY) && (edges_dst.size() != num_edges_src)) {
           BKE_report(reports,
                      RPT_ERROR,
-                     "Source and destination meshes do not have the same amount of edges, "
+                     "Source and destination meshes do not have the same number of edges, "
                      "'Topology' mapping cannot be used in this case");
           continue;
         }
         if ((map_edge_mode & MREMAP_USE_POLY) && (me_src->faces_num == 0)) {
           BKE_report(reports,
                      RPT_ERROR,
-                     "Source mesh doesn't have any faces, "
-                     "None of the 'Face' mappings can be used in this case");
+                     "Source mesh does not have any faces, "
+                     "none of the 'Face' mappings can be used in this case");
           continue;
         }
         if (ELEM(0, edges_dst.size(), num_edges_src)) {
@@ -1623,15 +1623,15 @@ bool BKE_object_data_transfer_ex(Depsgraph *depsgraph,
         {
           BKE_report(reports,
                      RPT_ERROR,
-                     "Source and destination meshes do not have the same amount of face corners, "
+                     "Source and destination meshes do not have the same number of face corners, "
                      "'Topology' mapping cannot be used in this case");
           continue;
         }
         if ((map_loop_mode & MREMAP_USE_EDGE) && (me_src->totedge == 0)) {
           BKE_report(reports,
                      RPT_ERROR,
-                     "Source mesh doesn't have any edges, "
-                     "None of the 'Edge' mappings can be used in this case");
+                     "Source mesh does not have any edges, "
+                     "none of the 'Edge' mappings can be used in this case");
           continue;
         }
         if (ELEM(0, corner_verts_dst.size(), num_loops_src)) {
@@ -1717,15 +1717,15 @@ bool BKE_object_data_transfer_ex(Depsgraph *depsgraph,
         if ((map_face_mode == MREMAP_MODE_TOPOLOGY) && (faces_dst.size() != num_faces_src)) {
           BKE_report(reports,
                      RPT_ERROR,
-                     "Source and destination meshes do not have the same amount of faces, "
+                     "Source and destination meshes do not have the same number of faces, "
                      "'Topology' mapping cannot be used in this case");
           continue;
         }
         if ((map_face_mode & MREMAP_USE_EDGE) && (me_src->totedge == 0)) {
           BKE_report(reports,
                      RPT_ERROR,
-                     "Source mesh doesn't have any edges, "
-                     "None of the 'Edge' mappings can be used in this case");
+                     "Source mesh does not have any edges, "
+                     "none of the 'Edge' mappings can be used in this case");
           continue;
         }
         if (ELEM(0, faces_dst.size(), num_faces_src)) {

source/blender/editors/gpencil_legacy/gpencil_armature.cc

@@ -591,13 +591,13 @@ static int gpencil_generate_weights_exec(bContext *C, wmOperator *op)
     GpencilModifierData *md = BKE_gpencil_modifiers_findby_type(ob_eval,
                                                                 eGpencilModifierType_Armature);
     if (md == nullptr) {
-      BKE_report(op->reports, RPT_ERROR, "The grease pencil object need an Armature modifier");
+      BKE_report(op->reports, RPT_ERROR, "The grease pencil object needs an Armature modifier");
       return OPERATOR_CANCELLED;
     }
 
     ArmatureGpencilModifierData *mmd = (ArmatureGpencilModifierData *)md;
     if (mmd->object == nullptr) {
-      BKE_report(op->reports, RPT_ERROR, "Armature modifier is not valid or wrong defined");
+      BKE_report(op->reports, RPT_ERROR, "The Armature modifier is invalid");
       return OPERATOR_CANCELLED;
     }
 

source/blender/editors/interface/interface_templates.cc

@@ -6469,7 +6469,7 @@ void uiTemplateReportsBanner(uiLayout *layout, bContext *C)
                       0,
                       UI_UNIT_X,
                       UI_UNIT_Y,
-                      TIP_("Click to see the remaining reports in text block: 'Recent Reports'"));
+                      TIP_("Click to open the info editor"));
   UI_GetThemeColorType4ubv(UI_text_colorid_from_report_type(report->type), SPACE_INFO, but->col);
   but->col[3] = 255; /* This theme color is RBG only, so have to set alpha here. */
 

source/blender/editors/object/object_modifier.cc

@@ -2655,7 +2655,7 @@ static int multires_rebuild_subdiv_exec(bContext *C, wmOperator *op)
 
   int new_levels = multiresModifier_rebuild_subdiv(depsgraph, object, mmd, INT_MAX, false);
   if (new_levels == 0) {
-    BKE_report(op->reports, RPT_ERROR, "Not valid subdivisions found to rebuild lower levels");
+    BKE_report(op->reports, RPT_ERROR, "No valid subdivisions found to rebuild lower levels");
     return OPERATOR_CANCELLED;
   }
 

source/blender/editors/space_userpref/userpref_ops.cc

@@ -282,7 +282,7 @@ static void PREFERENCES_OT_extension_repo_add(wmOperatorType *ot)
 {
   ot->name = "Add Extension Repository";
   ot->idname = "PREFERENCES_OT_extension_repo_add";
-  ot->description = "Add a directory to be used as a local extensions repository";
+  ot->description = "Add a directory to be used as a local extension repository";
 
   ot->exec = preferences_extension_repo_add_exec;
   ot->invoke = preferences_extension_repo_add_invoke;
@@ -343,7 +343,7 @@ static void PREFERENCES_OT_extension_repo_remove(wmOperatorType *ot)
 {
   ot->name = "Remove Extension Repository";
   ot->idname = "PREFERENCES_OT_extension_repo_remove";
-  ot->description = "Remove an extensions repository";
+  ot->description = "Remove an extension repository";
 
   ot->exec = preferences_extension_repo_remove_exec;
   ot->poll = preferences_extension_repo_remove_poll;

source/blender/makesrna/intern/rna_lightprobe.cc

@@ -247,7 +247,7 @@ static void rna_def_lightprobe(BlenderRNA *brna)
       prop,
       "Capture World",
       "Bake incoming light from the world, instead of just the visibility, "
-      "for more accurate lighting, but loose correct blending to surrounding irradiance volumes");
+      "for more accurate lighting, but lose correct blending to surrounding irradiance volumes");
   RNA_def_property_update(prop, NC_MATERIAL | ND_SHADING, nullptr);
 
   prop = RNA_def_property(srna, "grid_capture_indirect", PROP_BOOLEAN, PROP_NONE);

source/blender/makesrna/intern/rna_rna.cc

@@ -3161,7 +3161,7 @@ static void rna_def_property(BlenderRNA *brna)
   prop = RNA_def_property(srna, "is_enum_flag", PROP_BOOLEAN, PROP_NONE);
   RNA_def_property_clear_flag(prop, PROP_EDITABLE);
   RNA_def_property_boolean_funcs(prop, "rna_Property_is_enum_flag_get", nullptr);
-  RNA_def_property_ui_text(prop, "Enum Flag", "True when multiple enums ");
+  RNA_def_property_ui_text(prop, "Enum Flag", "True when multiple enums");
 
   prop = RNA_def_property(srna, "is_library_editable", PROP_BOOLEAN, PROP_NONE);
   RNA_def_property_clear_flag(prop, PROP_EDITABLE);

source/blender/makesrna/intern/rna_scene.cc

@@ -7399,7 +7399,7 @@ static void rna_def_raytrace_eevee(BlenderRNA *brna)
 
   prop = RNA_def_property(srna, "resolution_scale", PROP_ENUM, PROP_NONE);
   RNA_def_property_enum_items(prop, pixel_rate_items);
-  RNA_def_property_ui_text(prop, "Resolution", "Number of ray per pixel");
+  RNA_def_property_ui_text(prop, "Resolution", "Number of rays per pixel");
   RNA_def_property_override_flag(prop, PROPOVERRIDE_OVERRIDABLE_LIBRARY);
   RNA_def_property_update(prop, NC_SCENE | ND_RENDER_OPTIONS, nullptr);
 

source/blender/makesrna/intern/rna_userdef.cc

@@ -6489,7 +6489,7 @@ static void rna_def_userdef_filepaths_extension_repo(BlenderRNA *brna)
 
   prop = RNA_def_property(srna, "remote_path", PROP_STRING, PROP_NONE);
   RNA_def_property_string_sdna(prop, nullptr, "remote_path");
-  RNA_def_property_ui_text(prop, "Remote Path", "Remote URL or path for extensions repository");
+  RNA_def_property_ui_text(prop, "Remote Path", "Remote URL or path for extension repository");
   RNA_def_property_translation_context(prop, BLT_I18NCONTEXT_EDITOR_FILEBROWSER);
   RNA_def_property_update(prop, 0, "rna_userdef_update");
 

source/blender/nodes/geometry/nodes/node_geo_curve_spline_parameter.cc

@@ -171,7 +171,8 @@ static Array<float> calculate_point_parameters(const bke::CurvesGeometry &curves
 
 class CurveParameterFieldInput final : public bke::CurvesFieldInput {
  public:
-  CurveParameterFieldInput() : bke::CurvesFieldInput(CPPType::get<float>(), "Curve Parameter node")
+  CurveParameterFieldInput()
+      : bke::CurvesFieldInput(CPPType::get<float>(), "Spline Parameter node")
   {
     category_ = Category::Generated;
   }