archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
5e6041496174904e1745b39517b63b0dff78326b
blender-archive/source/blender/editors/interface/view2d.c

1114 lines
32 KiB
C
Raw Normal View History

View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/**
* $Id$
*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2008 Blender Foundation.
* All rights reserved.
*
* Contributor(s): Blender Foundation, Joshua Leung
*
* ***** END GPL LICENSE BLOCK *****
*/
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
#include <string.h>
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
#include <math.h>
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
#include "MEM_guardedalloc.h"
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
#include "DNA_scene_types.h"
#include "DNA_screen_types.h"
#include "DNA_space_types.h"
#include "DNA_view2d_types.h"
#include "BKE_global.h"
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
#include "BKE_utildefines.h"
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
#include "WM_api.h"
#include "BIF_gl.h"
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
#include "BIF_glutil.h"
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
2.5 - compile fixes for Elubie's commit
2008-12-03 22:35:38 +00:00
#include "ED_screen.h"
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
#include "UI_resources.h"
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
#include "UI_text.h"
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
#include "UI_view2d.h"
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* *********************************************************************** */
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
/* Refresh and Validation */
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
/* Adjust mask size in response to view size changes
* - When drawing a region, this should be called before
* any other drawing using View2D happens.
*/
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
// XXX pre2.5 -> this used to be called calc_scrollrcts()
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
void UI_view2d_size_update(View2D *v2d, int winx, int winy)
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
{
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* mask - view frame */
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
v2d->mask.xmin= v2d->mask.ymin= 0;
v2d->mask.xmax= winx;
v2d->mask.ymax= winy;
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
/* scrollbars shrink mask area, but should be based off regionsize
* - they can only be on one edge of the region they define
*/
if (v2d->scroll) {
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* vertical scrollbar */
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & V2D_SCROLL_LEFT) {
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* on left-hand edge of region */
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
v2d->vert= v2d->mask;
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
v2d->vert.xmax= V2D_SCROLL_WIDTH;
v2d->mask.xmin= V2D_SCROLL_WIDTH;
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
}
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
else if (v2d->scroll & V2D_SCROLL_RIGHT) {
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* on right-hand edge of region */
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
v2d->vert= v2d->mask;
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
v2d->vert.xmin= v2d->vert.xmax-V2D_SCROLL_WIDTH;
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
v2d->mask.xmax= v2d->vert.xmin;
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* horizontal scrollbar */
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & (V2D_SCROLL_BOTTOM|V2D_SCROLL_BOTTOM_O)) {
/* on bottom edge of region (V2D_SCROLL_BOTTOM_O is outliner, the ohter is for standard) */
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
v2d->hor= v2d->mask;
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
v2d->hor.ymax= V2D_SCROLL_HEIGHT;
v2d->mask.ymin= V2D_SCROLL_HEIGHT;
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
}
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
else if (v2d->scroll & V2D_SCROLL_TOP) {
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* on upper edge of region */
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
v2d->hor= v2d->mask;
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
v2d->hor.ymin= v2d->hor.ymax-V2D_SCROLL_HEIGHT;
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
v2d->mask.ymax= v2d->hor.ymin;
}
}
}
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
/* Ensure View2D rects remain in a viable configuration
* - cur is not allowed to be: larger than max, smaller than min, or outside of tot
*/
// XXX pre2.5 -> this used to be called test_view2d()
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
// XXX FIXME - this is an old mess function... let's rewrite!
void UI_view2d_status_enforce(View2D *v2d, int winx, int winy)
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
{
/* cur is not allowed to be larger than max, smaller than min, or outside of tot */
rctf *cur, *tot;
float dx, dy, temp, fac, zoom;
/* correct winx for scrollbars */
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & V2D_SCROLL_LEFT) winx-= V2D_SCROLL_WIDTH;
if (v2d->scroll & (V2D_SCROLL_BOTTOM|V2D_SCROLL_BOTTOM_O)) winy-= V2D_SCROLL_HEIGHT;
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
/* header completely closed window */
if (winy <= 0) return;
/* get pointers */
cur= &v2d->cur;
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
tot= &v2d->cur;
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
/* dx, dy are width and height of v2d->cur, respectively */
dx= cur->xmax - cur->xmin;
dy= cur->ymax - cur->ymin;
/* keepzoom - restore old zoom */
if (v2d->keepzoom) {
/* keepzoom on x or y axis - reset size of current-viewable area to size of region (i.e. no zooming happened) */
if (v2d->keepzoom & V2D_LOCKZOOM_Y)
cur->ymax= cur->ymin + ((float)winy);
if (v2d->keepzoom & V2D_LOCKZOOM_X)
cur->xmax= cur->xmin + ((float)winx);
/* calculate zoom-factor for x */
zoom= ((float)winx)/dx;
/* if zoom factor is excessive, normalise it and calculate new width */
if ((zoom < v2d->minzoom) || (zoom > v2d->maxzoom)) {
if (zoom < v2d->minzoom) fac= zoom / v2d->minzoom;
else fac= zoom / v2d->maxzoom;
dx *= fac;
temp= 0.5f * (cur->xmax + cur->xmin);
cur->xmin= temp - (0.5f * dx);
cur->xmax= temp + (0.5f * dx);
}
/* calculate zoom-factor for y */
zoom= ((float)winy)/dy;
/* if zoom factor is excessive, normalise it and calculate new width */
if ((zoom < v2d->minzoom) || (zoom > v2d->maxzoom)) {
if (zoom < v2d->minzoom) fac= zoom / v2d->minzoom;
else fac= zoom / v2d->maxzoom;
dy *= fac;
temp= 0.5f * (cur->ymax + cur->ymin);
cur->ymin= temp - (0.5f * dy);
cur->ymax= temp + (0.5f * dy);
}
}
else {
/* if extents of cur are below or above what's acceptable, interpolate extent to lie halfway */
if (dx < v2d->min[0]) {
dx= v2d->min[0];
temp= 0.5f * (cur->xmax + cur->xmin);
cur->xmin= temp - (0.5f * dx);
cur->xmax= temp + (0.5f * dx);
}
else if (dx > v2d->max[0]) {
dx= v2d->max[0];
temp= 0.5f * (cur->xmax + cur->xmin);
cur->xmin= temp - (0.5f * dx);
cur->xmax= temp + (0.5f * dx);
}
if (dy < v2d->min[1]) {
dy= v2d->min[1];
temp= 0.5f * (cur->ymax + cur->ymin);
cur->ymin= temp - (0.5f * dy);
cur->ymax= temp + (0.5f * dy);
}
else if (dy > v2d->max[1]) {
dy= v2d->max[1];
temp= 0.5f * (cur->ymax + cur->ymin);
cur->ymin= temp-0.5*dy;
cur->ymax= temp+0.5*dy;
}
}
/* keep aspect - maintain aspect ratio */
if (v2d->keepaspect) {
short do_x=0, do_y=0;
/* when a window edge changes, the aspect ratio can't be used to
* find which is the best new 'cur' rect. thats why it stores 'old'
*/
if (winx != v2d->oldwinx) do_x= 1;
if (winy != v2d->oldwiny) do_y= 1;
/* here dx is cur ratio, while dy is win ratio */
dx= (cur->ymax - cur->ymin) / (cur->xmax - cur->xmin);
dy= ((float)winy) / ((float)winx);
/* both sizes change (area/region maximised) */
if (do_x == do_y) {
if ((do_x==1) && (do_y==1)) {
if (ABS(winx - v2d->oldwinx) > ABS(winy - v2d->oldwiny)) do_y= 0;
else do_x= 0;
}
else if (dy > 1.0f) do_x= 0;
else do_x= 1;
}
if (do_x) {
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
if ((v2d->keeptot == 2) && (winx != v2d->oldwinx)) {
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
/* This is a special hack for the outliner, to ensure that the
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
* outliner contents will stay in their relative place in the view
* when the view is resized
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
*/
cur->xmax -= cur->xmin;
cur->xmin= 0.0f;
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
}
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
else {
/* portrait window: correct for x */
dx= cur->ymax - cur->ymin;
temp= cur->xmax + cur->xmin;
cur->xmin= (temp / 2.0f) - (0.5f * dx / dy);
cur->xmax= (temp / 2.0f) + (0.5f * dx / dy);
}
}
else {
dx= cur->xmax - cur->xmin;
temp= cur->ymax + cur->ymin;
cur->ymin= (temp / 2.0f) - (0.5f * dy * dx);
cur->ymax= (temp / 2.0f) + (0.5f * dy * dx);
}
/* store region size for next time */
v2d->oldwinx= winx;
v2d->oldwiny= winy;
}
/* keeptot - make sure that size of cur doesn't exceed that of tot, otherwise, adjust! */
if (v2d->keeptot) {
/* calculate extents of cur */
dx= cur->xmax - cur->xmin;
dy= cur->ymax - cur->ymin;
/* cur is wider than tot? */
if (dx > (tot->xmax - tot->xmin)) {
if (v2d->keepzoom == 0) {
if (cur->xmin < tot->xmin) cur->xmin= tot->xmin;
if (cur->xmax > tot->xmax) cur->xmax= tot->xmax;
}
else {
/* maintaining zoom, so restore cur to tot size */
if (cur->xmax < tot->xmax) {
dx= tot->xmax - cur->xmax;
cur->xmin+= dx;
cur->xmax+= dx;
}
else if (cur->xmin > tot->xmin) {
dx= cur->xmin - tot->xmin;
cur->xmin-= dx;
cur->xmax-= dx;
}
}
}
else {
/* cur is smaller than tot, but cur cannot be outside of tot */
if (cur->xmin < tot->xmin) {
dx= tot->xmin - cur->xmin;
cur->xmin += dx;
cur->xmax += dx;
}
else if ((v2d->keeptot != 2) && (cur->xmax > tot->xmax)) {
/* NOTE: keeptot is 2, as keeptot!=0 makes sure it does get
* too freely scrolled on x-axis, but keeptot=1 will result
* in a snap-back when clicking on elements
*/
dx= cur->xmax - tot->xmax;
cur->xmin -= dx;
cur->xmax -= dx;
}
}
if (dy > (tot->ymax - tot->ymin)) {
if (v2d->keepzoom==0) {
if (cur->ymin < tot->ymin) cur->ymin= tot->ymin;
if (cur->ymax > tot->ymax) cur->ymax= tot->ymax;
}
else {
if (cur->ymax < tot->ymax) {
dy= tot->ymax - cur->ymax;
cur->ymin+= dy;
cur->ymax+= dy;
}
else if (cur->ymin > tot->ymin) {
dy= cur->ymin - tot->ymin;
cur->ymin -= dy;
cur->ymax -= dy;
}
}
}
else {
if (cur->ymin < tot->ymin) {
dy= tot->ymin - cur->ymin;
cur->ymin += dy;
cur->ymax += dy;
}
else if (cur->ymax > tot->ymax) {
dy= cur->ymax - tot->ymax;
cur->ymin-= dy;
cur->ymax-= dy;
}
}
}
}
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
/* ------------------ */
/* Change the size of the maximum viewable area (i.e. 'tot' rect)
* - Currently, caller will need to call UI_status_enforce() after this,
* with the region width+height to make sure that 'cur' rect is still valid
*/
void UI_view2d_totRect_set(View2D *v2d, int width, int height)
{
/* don't do anything if either value is 0 */
if (ELEM3(0, v2d, width, height))
return;
/* handle width - posx and negx flags are mutually exclusive, so watch out */
if ((v2d->align & V2D_ALIGN_NO_POS_X) && !(v2d->align & V2D_ALIGN_NO_NEG_X)) {
/* width is in negative-x half */
v2d->cur.xmin= (float)-width;
v2d->cur.xmax= 0.0f;
}
else if ((v2d->align & V2D_ALIGN_NO_NEG_X) && !(v2d->align & V2D_ALIGN_NO_POS_X)) {
/* width is in positive-x half */
v2d->cur.xmin= 0.0f;
v2d->cur.xmax= (float)width;
}
else {
/* width is centered around x==0 */
const float dx= (float)width / 2.0f;
v2d->cur.xmin= -dx;
v2d->cur.xmax= dx;
}
/* handle height - posx and negx flags are mutually exclusive, so watch out */
if ((v2d->align & V2D_ALIGN_NO_POS_Y) && !(v2d->align & V2D_ALIGN_NO_NEG_Y)) {
/* height is in negative-y half */
v2d->cur.ymin= (float)-height;
v2d->cur.ymax= 0.0f;
}
else if ((v2d->align & V2D_ALIGN_NO_NEG_Y) && !(v2d->align & V2D_ALIGN_NO_POS_Y)) {
/* height is in positive-y half */
v2d->cur.ymin= 0.0f;
v2d->cur.ymax= (float)height;
}
else {
/* height is centered around y==0 */
const float dy= (float)height / 2.0f;
v2d->cur.ymin= -dy;
v2d->cur.ymax= dy;
}
}
/* Restore 'cur' rect to standard orientation (i.e. optimal maximum view of tot) */
void UI_view2d_curRect_reset (View2D *v2d)
{
float width, height;
/* assume width and height of 'cur' rect by default, should be same size as mask */
width= (float)(v2d->mask.xmax - v2d->mask.xmin + 1);
height= (float)(v2d->mask.ymax - v2d->mask.ymin + 1);
/* handle width - posx and negx flags are mutually exclusive, so watch out */
if ((v2d->align & V2D_ALIGN_NO_POS_X) && !(v2d->align & V2D_ALIGN_NO_NEG_X)) {
/* width is in negative-x half */
v2d->cur.xmin= (float)-width;
v2d->cur.xmax= 0.0f;
}
else if ((v2d->align & V2D_ALIGN_NO_NEG_X) && !(v2d->align & V2D_ALIGN_NO_POS_X)) {
/* width is in positive-x half */
v2d->cur.xmin= 0.0f;
v2d->cur.xmax= (float)width;
}
else {
/* width is centered around x==0 */
const float dx= (float)width / 2.0f;
v2d->cur.xmin= -dx;
v2d->cur.xmax= dx;
}
/* handle height - posx and negx flags are mutually exclusive, so watch out */
if ((v2d->align & V2D_ALIGN_NO_POS_Y) && !(v2d->align & V2D_ALIGN_NO_NEG_Y)) {
/* height is in negative-y half */
v2d->cur.ymin= (float)-height;
v2d->cur.ymax= 0.0f;
}
else if ((v2d->align & V2D_ALIGN_NO_NEG_Y) && !(v2d->align & V2D_ALIGN_NO_POS_Y)) {
/* height is in positive-y half */
v2d->cur.ymin= 0.0f;
v2d->cur.ymax= (float)height;
}
else {
/* height is centered around y==0 */
const float dy= (float)height / 2.0f;
v2d->cur.ymin= -dy;
v2d->cur.ymax= dy;
}
}
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
/* *********************************************************************** */
/* View Matrix Setup */
/* Set view matrices to use 'cur' rect as viewing frame for View2D drawing
2.5 fixes - View2d bug: it was taking sliders into account for setting the window matrix, which it shouldn't (glViewport does). This caused error offset in drawing, like for current-frame scrolling. - Current frame scrolling in TimeWindow back on window level. (used to crash, but that was fixed in WM) - Made UI_view2d_region_to_view accept ints, no shorts - removed debug function in interface_ops.c
2008-12-03 13:14:01 +00:00
* - this assumes viewport/scissor been set for the region, taking scrollbars into account
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
*/
void UI_view2d_view_ortho(const bContext *C, View2D *v2d)
{
/* set the matrix - pixel offsets (-0.375) for 1:1 correspondance are not applied,
* as they were causing some unwanted offsets when drawing
*/
2.5 fixes - View2d bug: it was taking sliders into account for setting the window matrix, which it shouldn't (glViewport does). This caused error offset in drawing, like for current-frame scrolling. - Current frame scrolling in TimeWindow back on window level. (used to crash, but that was fixed in WM) - Made UI_view2d_region_to_view accept ints, no shorts - removed debug function in interface_ops.c
2008-12-03 13:14:01 +00:00
wmOrtho2(C->window, v2d->cur.xmin, v2d->cur.xmax, v2d->cur.ymin, v2d->cur.ymax);
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
}
2.5 fixes - View2d bug: it was taking sliders into account for setting the window matrix, which it shouldn't (glViewport does). This caused error offset in drawing, like for current-frame scrolling. - Current frame scrolling in TimeWindow back on window level. (used to crash, but that was fixed in WM) - Made UI_view2d_region_to_view accept ints, no shorts - removed debug function in interface_ops.c
2008-12-03 13:14:01 +00:00
/* Set view matrices to only use one axis of 'cur' only
* - this assumes viewport/scissor been set for the region, taking scrollbars into account
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
*
* - xaxis = if non-zero, only use cur x-axis, otherwise use cur-yaxis (mostly this will be used for x)
*/
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
void UI_view2d_view_orthoSpecial(const bContext *C, View2D *v2d, short xaxis)
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
{
ARegion *region= C->region;
int winx, winy;
/* calculate extents of region */
winx= region->winrct.xmax - region->winrct.xmin;
winy= region->winrct.ymax - region->winrct.ymin;
/* set the matrix - pixel offsets (-0.375) for 1:1 correspondance are not applied,
* as they were causing some unwanted offsets when drawing
*/
if (xaxis)
2.5 fixes - View2d bug: it was taking sliders into account for setting the window matrix, which it shouldn't (glViewport does). This caused error offset in drawing, like for current-frame scrolling. - Current frame scrolling in TimeWindow back on window level. (used to crash, but that was fixed in WM) - Made UI_view2d_region_to_view accept ints, no shorts - removed debug function in interface_ops.c
2008-12-03 13:14:01 +00:00
wmOrtho2(C->window, v2d->cur.xmin, v2d->cur.xmax, 0, winy);
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
else
2.5 fixes - View2d bug: it was taking sliders into account for setting the window matrix, which it shouldn't (glViewport does). This caused error offset in drawing, like for current-frame scrolling. - Current frame scrolling in TimeWindow back on window level. (used to crash, but that was fixed in WM) - Made UI_view2d_region_to_view accept ints, no shorts - removed debug function in interface_ops.c
2008-12-03 13:14:01 +00:00
wmOrtho2(C->window, 0, winx, v2d->cur.ymin, v2d->cur.ymax);
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
}
/* Restore view matrices after drawing */
void UI_view2d_view_restore(const bContext *C)
{
2.5 - compile fixes for Elubie's commit
2008-12-03 22:35:38 +00:00
ED_region_pixelspace(C, C->region);
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* *********************************************************************** */
/* Gridlines */
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* minimum pixels per gridstep */
#define MINGRIDSTEP 35
/* View2DGrid is typedef'd in UI_view2d.h */
struct View2DGrid {
float dx, dy; /* stepsize (in pixels) between gridlines */
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
float startx, starty; /* initial coordinates to start drawing grid from */
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
int powerx, powery; /* step as power of 10 */
};
/* --------------- */
/* try to write step as a power of 10 */
static void step_to_grid(float *step, int *power, int unit)
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
{
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
const float loga= log10(*step);
float rem;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
*power= (int)(loga);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
rem= loga - (*power);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
rem= pow(10.0, rem);
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
if (loga < 0.0) {
if (rem < 0.2) rem= 0.2;
else if(rem < 0.5) rem= 0.5;
else rem= 1.0;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
*step= rem * pow(10.0, (float)(*power));
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* for frames, we want 1.0 frame intervals only */
if (unit == V2D_UNIT_FRAMES) {
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
rem = 1.0;
*step = 1.0;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* prevents printing 1.0 2.0 3.0 etc */
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
if (rem == 1.0) (*power)++;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
else {
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
if (rem < 2.0) rem= 2.0;
else if(rem < 5.0) rem= 5.0;
else rem= 10.0;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
*step= rem * pow(10.0, (float)(*power));
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
(*power)++;
/* prevents printing 1.0, 2.0, 3.0, etc. */
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
if (rem == 10.0) (*power)++;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* Intialise settings necessary for drawing gridlines in a 2d-view
* - Currently, will return pointer to View2DGrid struct that needs to
* be freed with UI_view2d_free_grid()
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
* - Is used for scrollbar drawing too (for units drawing)
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
*
* - unit = V2D_UNIT_* grid steps in seconds or frames
* - clamp = V2D_CLAMP_* only show whole-number intervals
* - winx = width of region we're drawing to
* - winy = height of region we're drawing into
*/
View2DGrid *UI_view2d_calc_grid(const bContext *C, View2D *v2d, short unit, short clamp, int winx, int winy)
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
{
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
View2DGrid *grid;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
float space, pixels, seconddiv;
int secondgrid;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* grid here is allocated... */
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
grid= MEM_callocN(sizeof(View2DGrid), "View2DGrid");
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* rule: gridstep is minimal GRIDSTEP pixels */
if (unit == V2D_UNIT_FRAMES) {
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
secondgrid= 1;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
seconddiv= 0.01f * FPS;
}
else {
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
secondgrid= 0;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
seconddiv= 1.0f;
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* calculate x-axis grid scale */
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
space= v2d->cur.xmax - v2d->cur.xmin;
pixels= v2d->mask.xmax - v2d->mask.xmin;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
grid->dx= (MINGRIDSTEP * space) / (seconddiv * pixels);
step_to_grid(&grid->dx, &grid->powerx, unit);
grid->dx *= seconddiv;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
if (clamp == V2D_GRID_CLAMP) {
if (grid->dx < 0.1f) grid->dx= 0.1f;
grid->powerx-= 2;
if (grid->powerx < -2) grid->powerx= -2;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* calculate y-axis grid scale */
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
space= (v2d->cur.ymax - v2d->cur.ymin);
pixels= winy;
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
grid->dy= MINGRIDSTEP * space / pixels;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
step_to_grid(&grid->dy, &grid->powery, unit);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
if (clamp == V2D_GRID_CLAMP) {
if (grid->dy < 1.0f) grid->dy= 1.0f;
if (grid->powery < 1) grid->powery= 1;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* calculate start position */
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
grid->startx= seconddiv*(v2d->cur.xmin/seconddiv - fmod(v2d->cur.xmin/seconddiv, grid->dx/seconddiv));
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
if (v2d->cur.xmin < 0.0f) grid->startx-= grid->dx;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
grid->starty= (v2d->cur.ymin - fmod(v2d->cur.ymin, grid->dy));
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
if (v2d->cur.ymin < 0.0f) grid->starty-= grid->dy;
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
return grid;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* Draw gridlines in the given 2d-region */
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
void UI_view2d_draw_grid(const bContext *C, View2D *v2d, View2DGrid *grid, int flag)
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
{
float vec1[2], vec2[2];
int a, step;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* vertical lines */
if (flag & V2D_VERTICAL_LINES) {
/* initialise initial settings */
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
vec1[0]= vec2[0]= grid->startx;
vec1[1]= grid->starty;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
vec2[1]= v2d->cur.ymax;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* minor gridlines */
step= (v2d->mask.xmax - v2d->mask.xmin + 1) / MINGRIDSTEP;
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
UI_ThemeColor(TH_GRID);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
for (a=0; a<step; a++) {
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
glBegin(GL_LINE_STRIP);
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
glVertex2fv(vec1);
glVertex2fv(vec2);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
glEnd();
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
vec2[0]= vec1[0]+= grid->dx;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* major gridlines */
vec2[0]= vec1[0]-= 0.5f*grid->dx;
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
UI_ThemeColorShade(TH_GRID, 16);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
step++;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
for (a=0; a<=step; a++) {
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
glBegin(GL_LINE_STRIP);
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
glVertex2fv(vec1);
glVertex2fv(vec2);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
glEnd();
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
vec2[0]= vec1[0]-= grid->dx;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* horizontal lines */
if (flag & V2D_HORIZONTAL_LINES) {
/* only major gridlines */
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
vec1[0]= grid->startx;
vec1[1]= vec2[1]= grid->starty;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
vec2[0]= v2d->cur.xmax;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
step= (v2d->mask.ymax - v2d->mask.ymax + 1) / MINGRIDSTEP;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
UI_ThemeColor(TH_GRID);
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
for (a=0; a<=step; a++) {
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
glBegin(GL_LINE_STRIP);
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
glVertex2fv(vec1);
glVertex2fv(vec2);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
glEnd();
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
vec2[1]= vec1[1]+= grid->dy;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* fine grid lines */
// er... only in IPO-Editor it seems (how to expose this in nice way)?
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
vec2[1]= vec1[1]-= 0.5f*grid->dy;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
step++;
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
#if 0
if (curarea->spacetype==SPACE_IPO) {
UI_ThemeColorShade(TH_GRID, 16);
for (a=0; a<step; a++) {
glBegin(GL_LINE_STRIP);
glVertex2fv(vec1);
glVertex2fv(vec2);
glEnd();
vec2[1]= vec1[1]-= grid->dy;
}
}
#endif
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* Axes are drawn as darker lines */
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
UI_ThemeColorShade(TH_GRID, -50);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* horizontal axis */
if (flag & V2D_HORIZONTAL_AXIS) {
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
vec1[0]= v2d->cur.xmin;
vec2[0]= v2d->cur.xmax;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
vec1[1]= vec2[1]= 0.0f;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
glBegin(GL_LINE_STRIP);
glVertex2fv(vec1);
glVertex2fv(vec2);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
glEnd();
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* vertical axis */
if (flag & V2D_VERTICAL_AXIS) {
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
vec1[1]= v2d->cur.ymin;
vec2[1]= v2d->cur.ymax;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
vec1[0]= vec2[0]= 0.0f;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
glBegin(GL_LINE_STRIP);
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
glVertex2fv(vec1);
glVertex2fv(vec2);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
glEnd();
}
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* free temporary memory used for drawing grid */
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
void UI_view2d_free_grid(View2DGrid *grid)
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
{
MEM_freeN(grid);
}
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
/* *********************************************************************** */
/* Scrollbars */
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
/* View2DScrollers is typedef'd in UI_view2d.h */
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
struct View2DScrollers {
/* focus bubbles */
int vert_min, vert_max; /* vertical scrollbar */
int hor_min, hor_max; /* horizontal scrollbar */
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* scales */
View2DGrid *grid; /* grid for coordinate drawing */
short xunits, xclamp; /* units and clamping options for x-axis */
short yunits, yclamp; /* units and clamping options for y-axis */
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
};
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
/* Calculate relevant scroller properties */
View2D - assorted wip changes (nothing to see here)
2008-12-03 09:06:30 +00:00
View2DScrollers *UI_view2d_calc_scrollers(const bContext *C, View2D *v2d, short xunits, short xclamp, short yunits, short yclamp)
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
{
View2DScrollers *scrollers;
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
rcti vert, hor;
float fac, totsize, scrollsize;
vert= v2d->vert;
hor= v2d->hor;
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
/* scrollers is allocated here... */
scrollers= MEM_callocN(sizeof(View2DScrollers), "View2DScrollers");
View2D - assorted wip changes (nothing to see here)
2008-12-03 09:06:30 +00:00
/* scroller 'buttons':
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
* - These should always remain within the visible region of the scrollbar
* - They represent the region of 'tot' that is visible in 'cur'
*/
View2D - assorted wip changes (nothing to see here)
2008-12-03 09:06:30 +00:00
/* horizontal scrollers */
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & (V2D_SCROLL_HORIZONTAL|V2D_SCROLL_HORIZONTAL_O)) {
View2D - assorted wip changes (nothing to see here)
2008-12-03 09:06:30 +00:00
/* slider 'button' extents */
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
totsize= v2d->cur.xmax - v2d->cur.xmin;
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
scrollsize= hor.xmax - hor.xmin;
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
fac= (v2d->cur.xmin- v2d->cur.xmin) / totsize;
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
//if (fac < 0.0f) fac= 0.0f;
scrollers->hor_min= hor.xmin + (fac * scrollsize);
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
fac= (v2d->cur.xmax - v2d->cur.xmin) / totsize;
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
//if (fac > 1.0f) fac= 1.0f;
scrollers->hor_max= hor.xmin + (fac * scrollsize);
if (scrollers->hor_min > scrollers->hor_max)
scrollers->hor_min= scrollers->hor_max;
}
View2D - assorted wip changes (nothing to see here)
2008-12-03 09:06:30 +00:00
/* vertical scrollers */
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & V2D_SCROLL_VERTICAL) {
View2D - assorted wip changes (nothing to see here)
2008-12-03 09:06:30 +00:00
/* slider 'button' extents */
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
totsize= v2d->cur.ymax - v2d->cur.ymin;
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
scrollsize= vert.ymax - vert.ymin;
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
fac= (v2d->cur.ymin- v2d->cur.ymin) / totsize;
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
//if (fac < 0.0f) fac= 0.0f;
scrollers->vert_min= vert.ymin + (fac * scrollsize);
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
fac= (v2d->cur.ymax - v2d->cur.ymin) / totsize;
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
//if (fac > 1.0f) fac= 1.0f;
scrollers->vert_max= vert.ymin + (fac * scrollsize);
if (scrollers->vert_min > scrollers->vert_max)
scrollers->vert_min= scrollers->vert_max;
}
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* grid markings on scrollbars */
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & (V2D_SCROLL_SCALE_HORIZONTAL|V2D_SCROLL_SCALE_VERTICAL)) {
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* store clamping */
scrollers->xclamp= xclamp;
scrollers->xunits= xunits;
scrollers->yclamp= yclamp;
scrollers->yunits= yunits;
/* calculate grid */
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & V2D_SCROLL_SCALE_HORIZONTAL)
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
scrollers->grid= UI_view2d_calc_grid(C, v2d, xunits, xclamp, (hor.xmax - hor.xmin), (vert.ymax - vert.ymin));
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
else if (v2d->scroll & V2D_SCROLL_SCALE_VERTICAL)
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
scrollers->grid= UI_view2d_calc_grid(C, v2d, yunits, yclamp, (hor.xmax - hor.xmin), (vert.ymax - vert.ymin));
}
/* return scrollers */
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
return scrollers;
}
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* XXX */
extern void ui_rasterpos_safe(float x, float y, float aspect);
/* Print scale marking along a time scrollbar */
static void scroll_printstr(View2DScrollers *scrollers, float x, float y, float val, int power, short unit, char dir)
{
int len;
char str[32];
/* adjust the scale unit to work ok */
if (dir == 'v') {
/* here we bump up the power by factor of 10, as
* rotation values (hence 'degrees') are divided by 10 to
* be able to show the curves at the same time
*/
if ELEM(unit, V2D_UNIT_DEGREES, V2D_UNIT_TIME) {
power += 1;
val *= 10;
}
}
/* get string to print */
if (power <= 0) sprintf(str, "%.*f", 1-power, val);
else sprintf(str, "%d", (int)floor(val + 0.375));
/* get length of string, and adjust printing location to fit it into the horizontal scrollbar */
len= strlen(str);
if (dir == 'h') x-= 4*len; // err... why not just half len?
/* Add degree sympbol to end of string for vertical scrollbar? */
if ((dir == 'v') && (unit == V2D_UNIT_DEGREES)) {
str[len]= 186;
str[len+1]= 0;
}
/* draw it */
ui_rasterpos_safe(x, y, 1.0);
UI_DrawString(G.fonts, str, 0); // XXX check this again when new text-drawing api is done
}
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
/* Draw scrollbars in the given 2d-region */
View2D: Scrollbar tweaks * Added back vertical scale markings for vertical scrollbars. Currently untested (until IPO Editor can be put back in). Also, there was a special exception for the Sequencer, which will need to be checked when the time comes too. * Fixed the display of frame numbers in scrollbars. Was caused by error in using an int, where a float was required (this is one place MSVC gives better warnings than GCC). * Outliner horizontal scrollbar now displays a more useful range. The previous range was based on screen width, not width of content. * Outliner horizontal scrollbar now draws with bevel-highlight line again. Was missed out in a previous commit. * Added simple toggle Frames/Seconds operator to TimeLine to test if the View2D code is working right for this. This uses the same hotkey (TKEY) as it's counterpart (with a menu for input) did in previous incarnations of Blender.
2008-12-04 05:37:55 +00:00
void UI_view2d_draw_scrollers(const bContext *C, View2D *v2d, View2DScrollers *scrollers)
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
{
const int darker= -40, dark= 0, light= 20, lighter= 50;
rcti vert, hor;
vert= v2d->vert;
hor= v2d->hor;
/* horizontal scrollbar */
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & (V2D_SCROLL_HORIZONTAL|V2D_SCROLL_HORIZONTAL_O)) {
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
/* scroller backdrop */
UI_ThemeColorShade(TH_SHADE1, light);
glRecti(hor.xmin, hor.ymin, hor.xmax, hor.ymax);
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
/* slider 'button' */
// FIXME: implement fancy one... but only when we get this working first!
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
{
UI_ThemeColorShade(TH_SHADE1, dark);
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
glRecti(scrollers->hor_min, hor.ymin+2, scrollers->hor_max, hor.ymax-2);
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
/* draw lines on either end of 'box' */
glLineWidth(2.0);
UI_ThemeColorShade(TH_SHADE1, darker);
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
sdrawline(scrollers->hor_min, hor.ymin+2, scrollers->hor_min, hor.ymax-2);
sdrawline(scrollers->hor_max, hor.ymin+2, scrollers->hor_max, hor.ymax-2);
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
glLineWidth(1.0);
}
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
/* scale indicators */
// XXX will need to update the font drawing when the new stuff comes in
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & V2D_SCROLL_SCALE_HORIZONTAL) {
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
View2DGrid *grid= scrollers->grid;
View2D: Scrollbar tweaks * Added back vertical scale markings for vertical scrollbars. Currently untested (until IPO Editor can be put back in). Also, there was a special exception for the Sequencer, which will need to be checked when the time comes too. * Fixed the display of frame numbers in scrollbars. Was caused by error in using an int, where a float was required (this is one place MSVC gives better warnings than GCC). * Outliner horizontal scrollbar now displays a more useful range. The previous range was based on screen width, not width of content. * Outliner horizontal scrollbar now draws with bevel-highlight line again. Was missed out in a previous commit. * Added simple toggle Frames/Seconds operator to TimeLine to test if the View2D code is working right for this. This uses the same hotkey (TKEY) as it's counterpart (with a menu for input) did in previous incarnations of Blender.
2008-12-04 05:37:55 +00:00
float fac, dfac, fac2, val;
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* the numbers: convert grid->startx and -dx to scroll coordinates
* - fac is x-coordinate to draw to
* - dfac is gap between scale markings
*/
fac= (grid->startx- v2d->cur.xmin) / (v2d->cur.xmax - v2d->cur.xmin);
fac= hor.xmin + fac*(hor.xmax - hor.xmin);
dfac= (grid->dx) / (v2d->cur.xmax - v2d->cur.xmin);
View2D: Scrollbar tweaks * Added back vertical scale markings for vertical scrollbars. Currently untested (until IPO Editor can be put back in). Also, there was a special exception for the Sequencer, which will need to be checked when the time comes too. * Fixed the display of frame numbers in scrollbars. Was caused by error in using an int, where a float was required (this is one place MSVC gives better warnings than GCC). * Outliner horizontal scrollbar now displays a more useful range. The previous range was based on screen width, not width of content. * Outliner horizontal scrollbar now draws with bevel-highlight line again. Was missed out in a previous commit. * Added simple toggle Frames/Seconds operator to TimeLine to test if the View2D code is working right for this. This uses the same hotkey (TKEY) as it's counterpart (with a menu for input) did in previous incarnations of Blender.
2008-12-04 05:37:55 +00:00
dfac= dfac * (hor.xmax - hor.xmin);
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
View2D: Scrollbar tweaks * Added back vertical scale markings for vertical scrollbars. Currently untested (until IPO Editor can be put back in). Also, there was a special exception for the Sequencer, which will need to be checked when the time comes too. * Fixed the display of frame numbers in scrollbars. Was caused by error in using an int, where a float was required (this is one place MSVC gives better warnings than GCC). * Outliner horizontal scrollbar now displays a more useful range. The previous range was based on screen width, not width of content. * Outliner horizontal scrollbar now draws with bevel-highlight line again. Was missed out in a previous commit. * Added simple toggle Frames/Seconds operator to TimeLine to test if the View2D code is working right for this. This uses the same hotkey (TKEY) as it's counterpart (with a menu for input) did in previous incarnations of Blender.
2008-12-04 05:37:55 +00:00
/* set starting value, and text color */
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
UI_ThemeColor(TH_TEXT);
val= grid->startx;
/* if we're clamping to whole numbers only, make sure entries won't be repeated */
if (scrollers->xclamp == V2D_GRID_CLAMP) {
while (grid->dx < 0.9999f) {
grid->dx *= 2.0f;
dfac *= 2.0f;
}
}
if (scrollers->xunits == V2D_UNIT_FRAMES)
grid->powerx= 1;
/* draw numbers in the appropriate range */
if (dfac != 0.0f) {
for (; fac < hor.xmax; fac+=dfac, val+=grid->dx) {
switch (scrollers->xunits) {
case V2D_UNIT_FRAMES: /* frames (as whole numbers)*/
scroll_printstr(scrollers, fac, 3.0+(float)(hor.ymin), val, grid->powerx, V2D_UNIT_FRAMES, 'h');
break;
case V2D_UNIT_SECONDS: /* seconds */
fac2= val/FPS;
scroll_printstr(scrollers, fac, 3.0+(float)(hor.ymin), fac2, grid->powerx, V2D_UNIT_SECONDS, 'h');
break;
case V2D_UNIT_SECONDSSEQ: /* seconds with special calculations (only used for sequencer only) */
{
float time;
fac2= val/FPS;
time= floor(fac2);
fac2= fac2-time;
scroll_printstr(scrollers, fac, 3.0+(float)(hor.ymin), time+FPS*fac2/100.0, grid->powerx, V2D_UNIT_SECONDSSEQ, 'h');
}
break;
case V2D_UNIT_DEGREES: /* IPO-Editor for rotation IPO-Drivers */
/* HACK: although we're drawing horizontal, we make this draw as 'vertical', just to get degree signs */
scroll_printstr(scrollers, fac, 3.0+(float)(hor.ymin), val, grid->powerx, V2D_UNIT_DEGREES, 'v');
break;
}
}
}
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
}
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
/* decoration outer bevel line */
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
UI_ThemeColorShade(TH_SHADE1, lighter);
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & (V2D_SCROLL_BOTTOM|V2D_SCROLL_BOTTOM_O))
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
sdrawline(hor.xmin, hor.ymax, hor.xmax, hor.ymax);
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
else if (v2d->scroll & V2D_SCROLL_TOP)
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
sdrawline(hor.xmin, hor.ymin, hor.xmax, hor.ymin);
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
}
/* vertical scrollbar */
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & V2D_SCROLL_VERTICAL) {
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
/* scroller backdrop */
UI_ThemeColorShade(TH_SHADE1, light);
glRecti(vert.xmin, vert.ymin, vert.xmax, vert.ymax);
View2D - Zoom + More Scrollbar work * Added basic (non-modal) zoom operators that use a uniform scale factor, with zoom centered using the view center as scaling point. Use Scrollwheel up/down and Pad +/- to use this. * Added back the 'button'/bubble for the scrollbars. I've added dark lines on either end of it for some later work on zooming widgets. This is not the final form they'll take. I still need to decide how to handle those scrollbars which act as grid-markers too (showing timescale, etc.), before trying to integrate that with some fancy scrollbar drawing (rounded, etc.) Assorted changes: * Moved vertical scrollbar for Outliner to right hand side * Made Timeline use standard scrollbars, and turned on various clamping options * Fixed ortho-matrix corrections for scrollbars, and added pixel offsets * Made Timeline markers sit more snugly on the scrollbar. They were a bit far out... * Fixed memory leak with view2d keymaps not being freed when Blender exited
2008-12-01 11:37:05 +00:00
/* slider 'button' */
// FIXME: implement fancy one... but only when we get this working first!
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
{
UI_ThemeColorShade(TH_SHADE1, dark);
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
glRecti(vert.xmin+2, scrollers->vert_min, vert.xmax-2, scrollers->vert_max);
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
/* draw lines on either end of 'box' */
glLineWidth(2.0);
UI_ThemeColorShade(TH_SHADE1, darker);
View2D API: Cleaning up API + New Methods * Cleaned up flags defined for View2D, and added some for defining the alignment of the view's data in the 'tot' rect (i.e. which quadrant(s) the view data is allowed to reside in). * These flags are used in the new UI_view2d_totRect_set() function, which sets the new size of the 'tot' rect (i.e. the maximum viewable area). Currently, is only used for Outliner, but channel-lists also require this. * Added API method to reset 'cur' (current viewing region) to 'default' viewing region - UI_view2d_curRect_reset(). Currently, 'keepzoom' is not respected. I'll check on whether this is needed when I recode UI_view2d_status_enforce(), which is badly in need of a cleanup.
2008-12-05 02:03:37 +00:00
sdrawline(vert.xmin+2, scrollers->vert_min, vert.xmax-2, scrollers->vert_min);
sdrawline(vert.xmin+2, scrollers->vert_max, vert.xmax-2, scrollers->vert_max);
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
glLineWidth(1.0);
}
/* scale indiators */
// XXX will need to update the font drawing when the new stuff comes in
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & V2D_SCROLL_SCALE_VERTICAL) {
View2D: Scrollbar tweaks * Added back vertical scale markings for vertical scrollbars. Currently untested (until IPO Editor can be put back in). Also, there was a special exception for the Sequencer, which will need to be checked when the time comes too. * Fixed the display of frame numbers in scrollbars. Was caused by error in using an int, where a float was required (this is one place MSVC gives better warnings than GCC). * Outliner horizontal scrollbar now displays a more useful range. The previous range was based on screen width, not width of content. * Outliner horizontal scrollbar now draws with bevel-highlight line again. Was missed out in a previous commit. * Added simple toggle Frames/Seconds operator to TimeLine to test if the View2D code is working right for this. This uses the same hotkey (TKEY) as it's counterpart (with a menu for input) did in previous incarnations of Blender.
2008-12-04 05:37:55 +00:00
View2DGrid *grid= scrollers->grid;
float fac, dfac, val;
/* the numbers: convert grid->starty and dy to scroll coordinates
* - fac is y-coordinate to draw to
* - dfac is gap between scale markings
* - these involve a correction for horizontal scrollbar
* NOTE: it's assumed that that scrollbar is there if this is involved!
*/
fac= (grid->starty- v2d->cur.ymin) / (v2d->cur.ymax - v2d->cur.ymin);
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
fac= (vert.ymin + V2D_SCROLL_HEIGHT) + fac*(vert.ymax - vert.ymin - V2D_SCROLL_HEIGHT);
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
View2D: Scrollbar tweaks * Added back vertical scale markings for vertical scrollbars. Currently untested (until IPO Editor can be put back in). Also, there was a special exception for the Sequencer, which will need to be checked when the time comes too. * Fixed the display of frame numbers in scrollbars. Was caused by error in using an int, where a float was required (this is one place MSVC gives better warnings than GCC). * Outliner horizontal scrollbar now displays a more useful range. The previous range was based on screen width, not width of content. * Outliner horizontal scrollbar now draws with bevel-highlight line again. Was missed out in a previous commit. * Added simple toggle Frames/Seconds operator to TimeLine to test if the View2D code is working right for this. This uses the same hotkey (TKEY) as it's counterpart (with a menu for input) did in previous incarnations of Blender.
2008-12-04 05:37:55 +00:00
dfac= (grid->dy) / (v2d->cur.ymax - v2d->cur.ymin);
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
dfac= dfac * (vert.ymax - vert.ymin - V2D_SCROLL_HEIGHT);
View2D: Scrollbar tweaks * Added back vertical scale markings for vertical scrollbars. Currently untested (until IPO Editor can be put back in). Also, there was a special exception for the Sequencer, which will need to be checked when the time comes too. * Fixed the display of frame numbers in scrollbars. Was caused by error in using an int, where a float was required (this is one place MSVC gives better warnings than GCC). * Outliner horizontal scrollbar now displays a more useful range. The previous range was based on screen width, not width of content. * Outliner horizontal scrollbar now draws with bevel-highlight line again. Was missed out in a previous commit. * Added simple toggle Frames/Seconds operator to TimeLine to test if the View2D code is working right for this. This uses the same hotkey (TKEY) as it's counterpart (with a menu for input) did in previous incarnations of Blender.
2008-12-04 05:37:55 +00:00
/* set starting value, and text color */
UI_ThemeColor(TH_TEXT);
val= grid->starty;
/* if vertical clamping (to whole numbers) is used (i.e. in Sequencer), apply correction */
// XXX only relevant to Sequencer, so need to review this when we port that code
if (scrollers->yclamp == V2D_GRID_CLAMP)
fac += 0.5f * dfac;
/* draw vertical steps */
for (; fac < vert.ymax; fac+= dfac, val += grid->dy) {
scroll_printstr(scrollers, (float)(vert.xmax)-14.0, fac, val, grid->powery, scrollers->yunits, 'v');
}
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
}
/* decoration outer bevel line */
UI_ThemeColorShade(TH_SHADE1, lighter);
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
if (v2d->scroll & V2D_SCROLL_RIGHT)
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
sdrawline(vert.xmin, vert.ymin, vert.xmin, vert.ymax);
* rename some view2d defines to be clearer and more in line with the rest of view2d defines.
2008-12-04 20:28:59 +00:00
else if (v2d->scroll & V2D_SCROLL_LEFT)
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
sdrawline(vert.xmax, vert.ymin, vert.xmax, vert.ymax);
}
}
/* free temporary memory used for drawing scrollers */
void UI_view2d_free_scrollers(View2DScrollers *scrollers)
{
View2D: Units on Scrollers (XAxis only) Added back units on scrollbars for anim editors (i.e. Timeline). Vertical scrollbars have yet to be done, but there's no way to test yet. Using markers and current frame indicator (and value) as guides, it is clear that there is still some inaccuracy with the drawing of the grid or the frames/markers are drawn wrong! Will investigate further.
2008-12-04 02:01:42 +00:00
/* need to free grid as well... */
if (scrollers->grid) MEM_freeN(scrollers->grid);
View2D - Another WIP commit * Start of basic scrollbar drawing. This will be improved. Only Outliner shows these for now, as although the Timeline should show them, the old files didn't have them turned on. * Tidied up the view-panning operator - Fixed naming convention - Added user-adjustable properties (deltax, deltay in screenspace) * Added ctrl-scrollwheel (horizontal) and shift-scrollwheel (vertical) scroll operators. These use the view-panning code too. Unfortunately, I haven't been able to figure out why the WHEELMOUSEDOWN events don't seem to be triggering the operators!
2008-12-01 00:20:19 +00:00
MEM_freeN(scrollers);
}
View2D - Initial commit of Pan-View Operator * Moved View2D data from space-data to ARegion (aka regions). This has been done because drawing occurs in regions not areas anymore. The View2D struct is currently stored in the ARegion struct (not as pointer), given that most of the regions in use will be 2D anyway (only the 3d-view's "window" region is the exception). Added version patch code for outliner and timeline only for now. Headers are also likely to need this. * Added separate keymap for View2D operators. All regions that use View2D will need this added. This includes headers too. * Pan view operator (ED_View2D_OT_view_pan), currently works for Outliner and Timeline. Use MMB-drag as before. - It currently doesn't exposed any parameters for redo (via RNA-ID-Props), but only uses some customdata. Suggestions on what these parameters could be are welcomed. - I've yet to implement the necessary axis-locking features for this panning (which is required in Timeline for example to prevent vertical panning, which moves the markers out of view).
2008-11-30 06:15:33 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* *********************************************************************** */
/* Coordinate Conversions */
2.5 Branch: use themes for drawing the time space, and make view2d grid code a bit nicer.
2008-10-08 18:07:56 +00:00
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* Convert from screen/region space to 2d-View space
*
* - x,y = coordinates to convert
* - viewx,viewy = resultant coordinates
*/
2.5 fixes - View2d bug: it was taking sliders into account for setting the window matrix, which it shouldn't (glViewport does). This caused error offset in drawing, like for current-frame scrolling. - Current frame scrolling in TimeWindow back on window level. (used to crash, but that was fixed in WM) - Made UI_view2d_region_to_view accept ints, no shorts - removed debug function in interface_ops.c
2008-12-03 13:14:01 +00:00
void UI_view2d_region_to_view(View2D *v2d, int x, int y, float *viewx, float *viewy)
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
{
float div, ofs;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
if (viewx) {
div= v2d->mask.xmax - v2d->mask.xmin;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
ofs= v2d->mask.xmin;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
2.5 fixes - View2d bug: it was taking sliders into account for setting the window matrix, which it shouldn't (glViewport does). This caused error offset in drawing, like for current-frame scrolling. - Current frame scrolling in TimeWindow back on window level. (used to crash, but that was fixed in WM) - Made UI_view2d_region_to_view accept ints, no shorts - removed debug function in interface_ops.c
2008-12-03 13:14:01 +00:00
*viewx= v2d->cur.xmin + (v2d->cur.xmax-v2d->cur.xmin) * ((float)x - ofs) / div;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
if (viewy) {
div= v2d->mask.ymax - v2d->mask.ymin;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
ofs= v2d->mask.ymin;
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
2.5 fixes - View2d bug: it was taking sliders into account for setting the window matrix, which it shouldn't (glViewport does). This caused error offset in drawing, like for current-frame scrolling. - Current frame scrolling in TimeWindow back on window level. (used to crash, but that was fixed in WM) - Made UI_view2d_region_to_view accept ints, no shorts - removed debug function in interface_ops.c
2008-12-03 13:14:01 +00:00
*viewy= v2d->cur.ymin + (v2d->cur.ymax - v2d->cur.ymin) * ((float)y - ofs) / div;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* Convert from 2d-View space to screen/region space
* - Coordinates are clamped to lie within bounds of region
*
* - x,y = coordinates to convert
* - regionx,regiony = resultant coordinates
*/
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
void UI_view2d_view_to_region(View2D *v2d, float x, float y, short *regionx, short *regiony)
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
{
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* set initial value in case coordinate lies outside of bounds */
if (regionx)
*regionx= V2D_IS_CLIPPED;
if (regiony)
*regiony= V2D_IS_CLIPPED;
/* express given coordinates as proportional values */
x= (x - v2d->cur.xmin) / (v2d->cur.xmax - v2d->cur.xmin);
2.5 - Tooltips now respect view2d view (rna viewer). - Bugfix in viewd.c UI_view2d_view_to_region() (typo)
2008-12-03 17:11:50 +00:00
y= (y - v2d->cur.ymin) / (v2d->cur.ymax - v2d->cur.ymin);
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* check if values are within bounds */
if ((x>=0.0f) && (x<=1.0f) && (y>=0.0f) && (y<=1.0f)) {
if (regionx)
*regionx= v2d->mask.xmin + x*(v2d->mask.xmax-v2d->mask.xmin);
if (regiony)
*regiony= v2d->mask.ymin + y*(v2d->mask.ymax-v2d->mask.ymin);
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
}
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* Convert from 2d-view space to screen/region space
* - Coordinates are NOT clamped to lie within bounds of region
*
* - x,y = coordinates to convert
* - regionx,regiony = resultant coordinates
*/
Port of part of the Interface code to 2.50. This is based on the current trunk version, so these files should not need merges. There's two things (clipboard and intptr_t) that are missing in 2.50 and commented out with XXX 2.48, these can be enabled again once trunk is merged into this branch. Further this is not all interface code, there are many parts commented out: * interface.c: nearly all button types, missing: links, chartab, keyevent. * interface_draw.c: almost all code, with some small exceptions. * interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators, making it non-blocking. * interface_regions: this is a part of interface.c, split off, contains code to create regions for tooltips, menus, pupmenu (that one is crashing currently), color chooser, basically regions with buttons which is fairly independent of core interface code. * interface_panel.c and interface_icons.c: not ported over, so no panels and icons yet. Panels should probably become (free floating) regions? * text.c: (formerly language.c) for drawing text and translation. this works but is using bad globals still and could be cleaned up. Header Files: * ED_datafiles.h now has declarations for datatoc_ files, so those extern declarations can be #included instead of repeated. * The user interface code is in UI_interface.h and other UI_* files. Core: * The API for creating blocks, buttons, etc is nearly the same still. Blocks are now created per region instead of per area. * The code was made non-blocking, which means that any changes and redraws should be possible while editing a button. That means though that we need some sort of persistence even though the blender model is to recreate buttons for each redraw. So when a new block is created, some matching happens to find out which buttons correspond to buttons in the previously created block, and for activated buttons some data is then copied over to the new button. * Added UI_init/UI_init_userdef/UI_exit functions that should initialize code in this module, instead of multiple function calls in the windowmanager. * Removed most static/globals from interface.c. * Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it would integrate here? * Currently only full window redraws are used, this should become per region and maybe per button later. Operators: * Events are currently handled through two operators: button activate and menu handle. Operators may not be the best way to implement this, since there are currently some issues with events being missed, but they can become a special handler type instead, this should not be a big change. * The button activate operator runs as long as a button is active, and will handle all interaction with that button until the button is not activated anymore. This means clicking, text editing, number dragging, opening menu blocks, etc. * Since this operator has to be non-blocking, the ui_do_but code needed to made non-blocking. That means variables that were previously on the stack, now need to be stored away in a struct such that they can be accessed again when the operator receives more events. * Additionally the place in the ui_do_but code indicated the state, now that needs to be set explicit in order to handle the right events in the right state. So an activated button can be in one of these states: init, highlight, wait_flash, wait_release, wait_key_event, num_editing, text_editing, text_selecting, block_open, exit. * For each button type an ui_apply_but_* function has also been separated out from ui_do_but. This makes it possible to continuously apply the button as text is being typed for example, and there is an option in the code to enable this. Since the code non-blocking and can deal with the button being deleted even, it should be safe to do this. * When editing text, dragging numbers, etc, the actual data (but->poin) is not being edited, since that would mean data is being edited without correct updates happening, while some other part of blender may be accessing that data in the meantime. So data values, strings, vectors are written to a temporary location and only flush in the apply function. Regions: * Menus, color chooser, tooltips etc all create screen level regions. Such menu blocks give a handle to the button that creates it, which will contain the results of the menu block once a MESSAGE event is received from that menu block. * For this type of menu block the coordinates used to be in window space. They are still created that way and ui_positionblock still works with window coordinates, but after that the block and buttons are brought back to region coordinates since these are now contained in a region. * The flush/overdraw frontbuffer drawing code was removed, the windowmanager should have enough information with these screen level regions to have full control over what gets drawn when and to then do correct compositing. Testing: * The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
void UI_view2d_to_region_no_clip(View2D *v2d, float x, float y, short *regionx, short *regiony)
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
{
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* step 1: express given coordinates as proportional values */
x= (x - v2d->cur.xmin) / (v2d->cur.xmax - v2d->cur.xmin);
2.5 - Tooltips now respect view2d view (rna viewer). - Bugfix in viewd.c UI_view2d_view_to_region() (typo)
2008-12-03 17:11:50 +00:00
y= (y - v2d->cur.ymin) / (v2d->cur.ymax - v2d->cur.ymin);
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* step 2: convert proportional distances to screen coordinates */
x= v2d->mask.xmin + x*(v2d->mask.xmax - v2d->mask.xmin);
y= v2d->mask.ymin + y*(v2d->mask.ymax - v2d->mask.ymin);
/* although we don't clamp to lie within region bounds, we must avoid exceeding size of shorts */
if (regionx) {
if (x < -32760) *regionx= -32760;
else if(x > 32760) *regionx= 32760;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
else *regionx= x;
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
if (regiony) {
if (y < -32760) *regiony= -32760;
else if(y > 32760) *regiony= 32760;
2.5 Branch ========== * Changed wmOperatorType, removing init/exit callbacks and adding cancel callback, removed default storage in favor of properties. Defined return values for exec/invoke/modal/cancel. * Don't allocate operator on the stack, and removed operator copy for handlers. Now it frees based on return values from callbacks, and just keeps a wmOperator on the heap. Also it now registers after the operator is fully finished, to get the correct final properties. * Changed OP_get_* functions to return 1 if the property is found and 0 otherwise, gives more readable code in my opinion. Added OP_verify_* functions to quickly check if the property is available and set if it's not, that's common for exec/invoke. * Removed WM_operatortypelist_append in favor of WM_operatortype_append which takes a function pointer instead of a list, avoids macro's and duplicating code. * Fix a crash where the handler would still be used while it was freed by the operator. * Spacetypes now have operatortypes() and keymap() callbacks to abstract them a bit more. * Renamed C->curarea to C->area for consistency. Removed View3D/View2D/ SpaceIpo from bContext, seems bad to keep these. * Set context variables like window/screen/area/region to NULL again when leaving that context, instead of leaving the pointers there. * Added if(G.f & G_DEBUG) for many of the prints, makes output a bit cleaner and easier to debug. * Fixed priority of the editors/interface module in scons, would otherwise give link errors. * Added start of generic view2d api. * Added space_time with some basic drawing and a single operator to change the frame.
2008-06-11 10:10:31 +00:00
else *regiony= y;
}
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* *********************************************************************** */
/* Utilities */
View2D - Some more tweaks... * Improved scrollbar drawing a bit more - only cosmetic lines * Added new view2d view-matrix api method to only use 'cur' coordinates on one axis, for use when drawing markers, etc. that need to be glued to a certain time but stay fixed in space in another dimension. This should improve the sitation for drawing markers * To aid testing, adding markers now sets the marker to have frame number as it's "name". This will need to be removed later...
2008-12-02 09:43:23 +00:00
/* View2D data by default resides in region, so get from region stored in context */
View2D *UI_view2d_fromcontext(const bContext *C)
{
if (C->area == NULL) return NULL;
if (C->region == NULL) return NULL;
return &(C->region->v2d);
}
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
/* Calculate the scale per-axis of the drawing-area
* - Is used to inverse correct drawing of icons, etc. that need to follow view
* but not be affected by scale
*
* - x,y = scale on each axis
*/
More testing with new system: - Added markers (partially) back, ed_markers.c (temporary in spacetime, where to put general stuff like this?), and added ED_markers.h for api. - Mkey in timewindow shows marker (no icon, doesnt work yet). (Adding operators gets easy :) - Noted some conflict for operator storage... with markers being used all over, added it to the screen level. - More todos: view2d is stored in space, for time, etc. With regions we could move this over, but better todo as post 2.5 project. Multiple 2d views in area would be cool though.
2008-11-24 18:59:59 +00:00
void UI_view2d_getscale(View2D *v2d, float *x, float *y)
{
View2D - Commented and finished off cleaning up code added so far
2008-11-28 04:01:35 +00:00
if (x) *x = (v2d->mask.xmax - v2d->mask.xmin) / (v2d->cur.xmax - v2d->cur.xmin);
if (y) *y = (v2d->mask.ymax - v2d->mask.ymin) / (v2d->cur.ymax - v2d->cur.ymin);
More testing with new system: - Added markers (partially) back, ed_markers.c (temporary in spacetime, where to put general stuff like this?), and added ED_markers.h for api. - Mkey in timewindow shows marker (no icon, doesnt work yet). (Adding operators gets easy :) - Noted some conflict for operator storage... with markers being used all over, added it to the screen level. - More todos: view2d is stored in space, for time, etc. With regions we could move this over, but better todo as post 2.5 project. Multiple 2d views in area would be cool though.
2008-11-24 18:59:59 +00:00
}
Copy Permalink