archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
68341862ddf05e30ffbb9f2e7dd3a05e8cc81e77
blender-archive/source/blender/editors/mesh/mesh_intern.h

249 lines
10 KiB
C++
Raw Normal View History

2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/**
* $Id:
*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
* ***** END GPL LICENSE BLOCK *****
*/
/* Internal for editmesh_xxxx.c functions */
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
#ifndef MESH_INTERN_H
#define MESH_INTERN_H
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
Begin port of edge subdivide (with multicut) to bmesh. Basic infrastructure is in place, and subdivision patterns for quads are implemented. Properly handling of the (many) flags and options related to edge subdivide isn't complete, but I've made a good start. Goal is eventual 100% api compatibility with old esubdivide function, with some of the uglier design aspects refactored after some of the tools that rely on them are redone. Some notes: Customdata interpolation wasn't working right. I thought maybe the weights were off, so I swapped them, which surprising made it work. It's still not completely identical to old edge subdivide though.
2009-02-02 03:25:23 +00:00
#include "BLI_editVert.h"
#include "DNA_scene_types.h"
#include "DNA_object_types.h"
#include "DNA_mesh_types.h"
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
struct bContext;
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
struct wmOperatorType;
merge with 2.5 at revision 18432, made bmesh compile, and also made msvc use incremental linking under scons
2009-01-09 18:32:33 +00:00
struct ViewContext;
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
#define UVCOPY(t, s) memcpy(t, s, 2 * sizeof(float));
/* ******************** editface.c */
int edgetag_context_check(Scene *scene, EditEdge *eed);
void edgetag_context_set(Scene *scene, EditEdge *eed, int val);
int edgetag_shortest_path(Scene *scene, EditMesh *em, EditEdge *source, EditEdge *target);
/* ******************* editmesh.c */
extern void free_editvert(EditMesh *em, EditVert *eve);
extern void free_editedge(EditMesh *em, EditEdge *eed);
extern void free_editface(EditMesh *em, EditFace *efa);
void free_editMesh(EditMesh *em);
Replaced unified extrude edges/faces code (the stuff specificaly for edges/faces,extrudeflag_edgess, not the entire extrude system) with a bmesh version. This stress-tested the operator api, and I had to code some new stuff,including: * An api to iterate over Mapping slots and array slots. It's modeled after the normal iterator api. * The ability to copy mapping slots. * More mapping functions. * In addition to being able to flag elements in a buffer, you can now unflag them (much clearer then passing in ~flag I think). The extrude edge/faces code has multiple layers. At the top level is a funtion in editmesh_lib.c, which takes care of selection, handles mirror modifiers, etc. It calls the extrude operator, which in turns calls split, which calls dupe/del. Note that split needed a slot to exclude things from being deleting (e.g. when extruding a single isolated face). The basic idea (reflected in original design of split/dupe/del by Briggs) is to use the split function to do the heavy work of extrude. split spits out new geometry and mappings from boundary edges, for extrude (it should also spit out other mappings, but that's for later). Briggs: you may want to look over this, hopefully I didn't do anything too evil. I probably should spend some time going over the 2.5 mesh operators and cleaning them up, splitting ones that need splitting, etc, and in general getting them to work properly.
2009-02-12 16:59:51 +00:00
/*frees dst mesh, then copies the contents of
*src (the struct) to dst. */
void set_editMesh(EditMesh *dst, EditMesh *src);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
extern void free_vertlist(EditMesh *em, ListBase *edve);
extern void free_edgelist(EditMesh *em, ListBase *lb);
extern void free_facelist(EditMesh *em, ListBase *lb);
extern void remedge(EditMesh *em, EditEdge *eed);
extern struct EditVert *addvertlist(EditMesh *em, float *vec, struct EditVert *example);
extern struct EditEdge *addedgelist(EditMesh *em, struct EditVert *v1, struct EditVert *v2, struct EditEdge *example);
extern struct EditFace *addfacelist(EditMesh *em, struct EditVert *v1, struct EditVert *v2, struct EditVert *v3, struct EditVert *v4, struct EditFace *example, struct EditFace *exampleEdges);
extern struct EditEdge *findedgelist(EditMesh *em, struct EditVert *v1, struct EditVert *v2);
EditVert *editedge_getOtherVert(EditEdge *eed, EditVert *eve);
EditVert *editedge_getSharedVert(EditEdge *eed, EditEdge *eed2);
int editedge_containsVert(struct EditEdge *eed, struct EditVert *eve);
int editface_containsVert(struct EditFace *efa, struct EditVert *eve);
int editface_containsEdge(struct EditFace *efa, struct EditEdge *eed);
merge with 2.5 at revision 18432, made bmesh compile, and also made msvc use incremental linking under scons
2009-01-09 18:32:33 +00:00
void em_setup_viewcontext(struct bContext *C, struct ViewContext *vc);
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
2.5 Edit mesh: Separate options back. Use SHIFT+P for it, PKEY has been stolen! :)
2009-01-30 15:01:14 +00:00
void MESH_OT_separate(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_add.c */
2.5 Editmesh: add primitive basics back. Had to clean up a load of crap there... but it's sorta in control, so I think Shul can pick it up again. Test: ctrl+0 adds plane, or ctrl+9 adds grid. Notes for Shul: - i've added a transform function, which gets correctly passed on to the add_prim function, should work for all object transforms. Only the code inside add_prim might be needed to check (it uses 4x4 mat now, not a 3x3) - The old code with buttons has been ifdeffed out, check for user input and make it rna properties, which get read in the exec(), and handed over to the add_prim. Set them default now to the values from old buttons. - Operator naming is preferred lower case, I gave this a new name. - check a bit on formatting code, but don't use the old code as example! Look also at ED_keymap_mesh() for example.
2009-01-14 19:26:11 +00:00
void MESH_OT_add_primitive_plane(struct wmOperatorType *ot);
edit mesh primitives: ctrl+1 to ctrl+6. monkey does not show and tube,cone and cylinder show with problems
2009-01-15 03:05:19 +00:00
void MESH_OT_add_primitive_cube(struct wmOperatorType *ot);
void MESH_OT_add_primitive_circle(struct wmOperatorType *ot);
void MESH_OT_add_primitive_cylinder(struct wmOperatorType *ot);
void MESH_OT_add_primitive_tube(struct wmOperatorType *ot);
void MESH_OT_add_primitive_cone(struct wmOperatorType *ot);
2.5 Editmesh: add primitive basics back. Had to clean up a load of crap there... but it's sorta in control, so I think Shul can pick it up again. Test: ctrl+0 adds plane, or ctrl+9 adds grid. Notes for Shul: - i've added a transform function, which gets correctly passed on to the add_prim function, should work for all object transforms. Only the code inside add_prim might be needed to check (it uses 4x4 mat now, not a 3x3) - The old code with buttons has been ifdeffed out, check for user input and make it rna properties, which get read in the exec(), and handed over to the add_prim. Set them default now to the values from old buttons. - Operator naming is preferred lower case, I gave this a new name. - check a bit on formatting code, but don't use the old code as example! Look also at ED_keymap_mesh() for example.
2009-01-14 19:26:11 +00:00
void MESH_OT_add_primitive_grid(struct wmOperatorType *ot);
edit mesh primitives: ctrl+1 to ctrl+6. monkey does not show and tube,cone and cylinder show with problems
2009-01-15 03:05:19 +00:00
void MESH_OT_add_primitive_monkey(struct wmOperatorType *ot);
2.5 - Finished adding primitives in Mesh editmode. For test pleasure: hotkeys CTRL 0-9 add them. More fun for testers: - F3: gives menu of all registered ops. You can use it too, it then execs it again, and makes it the last executed operator. - F4: executes last registered operator without menu.
2009-01-15 18:28:40 +00:00
void MESH_OT_add_primitive_uv_sphere(struct wmOperatorType *ot);
void MESH_OT_add_primitive_ico_sphere(struct wmOperatorType *ot);
2.5 - Edit mesh: Add ctrl+click add vertex or extrude. I've made it not move the 3d cursor in that case. Also found out tweak events conflicted with existing keymap definitions; on tweak failure (= no mousemove) it now passes on the mouse event as 'mouse down' for the remaining keymaps to check. These then actually respond to mouse-up instead of down... The location in the keymaps where tweaks get generated remains important. Examples: 1 - 'select' mouse-handler, operator return pass-through 2 - tweak handler checks, and makes tweak event 3 - grabber responds to tweak event 1 - ctrl+mouse tweak handler checks, makes tweak event, or passes event on 2 - if tweak event, it runs lasso 3 - else when passed on, ctrl+click extrude happens In the first case, select works on mouse-down, immediate. In the second case, extrude happens on mouse-release, even though the keymap defined mouse-press. This will make designing nice balanced keymaps still not simple; especially because you can't tell operators to pass on the key... although we can add the convention that select-mouse operators always pass on to enable tweaks. Still a good reason to wait with custom keymaps when this is fully settled!
2009-01-30 18:18:41 +00:00
void MESH_OT_dupli_extrude_cursor(struct wmOperatorType *ot);
2.5 Edit Mesh: Fkey back, add edge-face or fill 'edge net' Make fgon will be different operator.
2009-01-30 19:14:50 +00:00
void MESH_OT_add_edge_face(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
make and clear fgon MKEY and shift+MKEY. ton: please check, it doesn't do what it should right now
2009-01-31 03:23:41 +00:00
void MESH_OT_make_fgon(struct wmOperatorType *ot);
void MESH_OT_clear_fgon(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_lib.c */
2.5 - Depricated another bunch of globals; all the totobj, totmesh, totvert, and so on. - All code that needs such totals now count it themselves, these stats were not supposed to be reliable - Editmesh now stores and manages own totals. - Todo: make a scene->stats that tracks notifiers. Bugfix: selecting failed in editmesh, backbuffer stuff was too late, already using index ranges before it was set.
2009-01-15 15:01:39 +00:00
void EM_stats_update(EditMesh *em);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
extern void EM_fgon_flags(EditMesh *em);
extern void EM_hide_reset(EditMesh *em);
extern int faceselectedOR(EditFace *efa, int flag);
extern int faceselectedAND(EditFace *efa, int flag);
void EM_remove_selection(EditMesh *em, void *data, int type);
void EM_clear_flag_all(EditMesh *em, int flag);
void EM_set_flag_all(EditMesh *em, int flag);
void EM_data_interp_from_verts(EditMesh *em, EditVert *v1, EditVert *v2, EditVert *eve, float fac);
void EM_data_interp_from_faces(EditMesh *em, EditFace *efa1, EditFace *efa2, EditFace *efan, int i1, int i2, int i3, int i4);
int EM_nvertices_selected(EditMesh *em);
2.5 - Depricated another bunch of globals; all the totobj, totmesh, totvert, and so on. - All code that needs such totals now count it themselves, these stats were not supposed to be reliable - Editmesh now stores and manages own totals. - Todo: make a scene->stats that tracks notifiers. Bugfix: selecting failed in editmesh, backbuffer stuff was too late, already using index ranges before it was set.
2009-01-15 15:01:39 +00:00
int EM_nedges_selected(EditMesh *em);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
int EM_nfaces_selected(EditMesh *em);
2.5 - Depricated another bunch of globals; all the totobj, totmesh, totvert, and so on. - All code that needs such totals now count it themselves, these stats were not supposed to be reliable - Editmesh now stores and manages own totals. - Todo: make a scene->stats that tracks notifiers. Bugfix: selecting failed in editmesh, backbuffer stuff was too late, already using index ranges before it was set.
2009-01-15 15:01:39 +00:00
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
float EM_face_perimeter(EditFace *efa);
void EM_store_selection(EditMesh *em, void *data, int type);
extern EditFace *exist_face(EditMesh *em, EditVert *v1, EditVert *v2, EditVert *v3, EditVert *v4);
extern void flipface(EditMesh *em, EditFace *efa); // flips for normal direction
extern int compareface(EditFace *vl1, EditFace *vl2);
/* flag for selection bits, *nor will be filled with normal for extrusion constraint */
/* return value defines if such normal was set */
extern short extrudeflag_face_indiv(EditMesh *em, short flag, float *nor);
extern short extrudeflag_verts_indiv(EditMesh *em, short flag, float *nor);
extern short extrudeflag_edges_indiv(EditMesh *em, short flag, float *nor);
2.5 From the anti-globalization department: G.obedit terminated! Wherever possible, use CTX_data_edit_object(C) to get this now. It's stored in scene now, and the screen context has it defined.
2009-01-02 19:10:35 +00:00
extern short extrudeflag_vert(Object *obedit, EditMesh *em, short flag, float *nor);
extern short extrudeflag(Object *obedit, EditMesh *em, short flag, float *nor);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
extern void adduplicateflag(EditMesh *em, int flag);
extern void delfaceflag(EditMesh *em, int flag);
extern void rotateflag(EditMesh *em, short flag, float *cent, float rotmat[][3]);
extern void translateflag(EditMesh *em, short flag, float *vec);
extern int convex(float *v1, float *v2, float *v3, float *v4);
extern struct EditFace *EM_face_from_faces(EditMesh *em, struct EditFace *efa1,
struct EditFace *efa2, int i1, int i2, int i3, int i4);
/* ******************* editmesh_loop.c */
#define LOOP_SELECT 1
#define LOOP_CUT 2
2.5 Edit Mesh: Knife Cut back. I've put it for now under ALT+CTRL+LMB, modeless direct cutting. Options for polyline input and snapping is for later. At least this works cool :)
2009-02-07 15:44:16 +00:00
void MESH_OT_knife_cut(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_mods.c */
2.5 Edit Mesh Loop select back; the versions with ALT+Select (edgeloop) or with ALT+CTRL+Select ('ring'). Hold shift for extend.
2009-01-30 18:53:54 +00:00
void MESH_OT_loop_select(struct wmOperatorType *ot);
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
void MESH_OT_de_select_all(struct wmOperatorType *ot);
added bmesh test op and made the dupeop.c stuff work, hopefully correctly.
2009-01-19 02:35:26 +00:00
void MESH_OT_bmesh_test(struct wmOperatorType *ot);
edit mesh operators for edit mesh view
2009-01-13 02:09:58 +00:00
void MESH_OT_select_more(struct wmOperatorType *ot);
void MESH_OT_select_less(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_select_invert(struct wmOperatorType *ot);
edit mesh operators for edit mesh view
2009-01-13 02:09:58 +00:00
void MESH_OT_select_non_manifold(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_select_linked(struct wmOperatorType *ot);
void MESH_OT_select_linked_pick(struct wmOperatorType *ot);
void MESH_OT_hide(struct wmOperatorType *ot);
void MESH_OT_reveal(struct wmOperatorType *ot);
2.5 Edit Mesh - "Select Similar" for vertices back. (Put under Jkey for now) - renamed operator righthand_faces to consistant_normals gave it boolean property for 'inside'.
2009-01-31 15:21:26 +00:00
void MESH_OT_consistant_normals(struct wmOperatorType *ot);
edit mesh operators for edit mesh view
2009-01-13 02:09:58 +00:00
void MESH_OT_select_linked_flat_faces(struct wmOperatorType *ot);
void MESH_OT_select_sharp_edges(struct wmOperatorType *ot);
2.5 Edit Mesh: - Added back "Edge Shortest Path select" It now also does regular selection, more fun! It's mapped to CTRL+click now, and makes or clears selections between current and previously activated edge. Seam/Sharp/etc marking is a toolsetting mode still. These options cannot become properties easily, because the tool uses the properties of selected edge to clear... - Removed a whole bunch of G.f flags, related to mesh drawing. It's all now local in me->drawflags. Here's the list of removed old globals: G_DRAWEDGES G_DRAWFACES G_DRAWNORMALS G_DRAW_VNORMALS G_ALLEDGES G_HIDDENEDGES G_DRAWCREASES G_DRAWSEAMS G_DRAWSHARP G_DRAWBWEIGHTS G_DRAW_EDGELEN G_DRAW_FACEAREA G_DRAW_EDGEANG
2009-01-31 13:30:56 +00:00
void MESH_OT_shortest_path_select(struct wmOperatorType *ot);
2.5 Edit Mesh - "Select Similar" for vertices back. (Put under Jkey for now) - renamed operator righthand_faces to consistant_normals gave it boolean property for 'inside'.
2009-01-31 15:21:26 +00:00
void MESH_OT_similar_vertex_select(struct wmOperatorType *ot);
2.5 Edit Mesh Added the two other 'select similar' ops, for edge and face. For testing fun I've put these ones as first keys using the modifier order feature. So it's now: SHIFT+G : similar vertex CTRL+SHIFT+G: similar edge SHIFT+CTRL+G: similar face Not very useful here; but I think this can work well to map a double amount of options under mouseclicks. Power user config stuff!
2009-01-31 16:54:37 +00:00
void MESH_OT_similar_edge_select(struct wmOperatorType *ot);
void MESH_OT_similar_face_select(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_select_random(struct wmOperatorType *ot);
vert to sphere - S + ctrl + shift keys
2009-02-01 00:18:45 +00:00
void MESH_OT_vertices_to_sphere(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_selection_type(struct wmOperatorType *ot);
Fix for select multi loop commit, probably missed this file.
2009-02-02 19:59:22 +00:00
void MESH_OT_select_multi_loop(struct wmOperatorType *ot);
mark and clear seam, set and unset sharp and vertex smoothing is now ctrl/alt 1, 2 and 3 - still a bit vague of op naming
2009-02-04 02:58:21 +00:00
void MESH_OT_mark_seam(struct wmOperatorType *ot);
void MESH_OT_mark_sharp(struct wmOperatorType *ot);
void MESH_OT_smooth_vertex(struct wmOperatorType *ot);
flip_editnormals is back, alt+3key
2009-02-05 01:32:37 +00:00
void MESH_OT_flip_editnormals(struct wmOperatorType *ot);
edit mesh operators for edit mesh view
2009-01-13 02:09:58 +00:00
merge with 2.5 at revision 18432, made bmesh compile, and also made msvc use incremental linking under scons
2009-01-09 18:32:33 +00:00
extern EditEdge *findnearestedge(struct ViewContext *vc, int *dist);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
extern void EM_automerge(int update);
void editmesh_select_by_material(EditMesh *em, int index);
void righthandfaces(EditMesh *em, int select); /* makes faces righthand turning */
void EM_select_more(EditMesh *em);
2.5 Edit mesh: Separate options back. Use SHIFT+P for it, PKEY has been stolen! :)
2009-01-30 15:01:14 +00:00
void selectconnected_mesh_all(EditMesh *em);
2.5 - Mesh Rip back (Vkey). For those who keep wondering how it works: just put mouse cursor somewhere close to the selection, press V and mouse mouse away from it. Feels like real rip! - Made extrude sorta work, no menu/options yet though. But it does transform! - Added an short event->mval[2] with region coords, easier coding for the guys :) - Fill operator standard delivers 'beauty' now
2009-02-19 19:03:53 +00:00
void faceloop_select(EditMesh *em, EditEdge *startedge, int select);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/**
* findnearestvert
*
* dist (in/out): minimal distance to the nearest and at the end, actual distance
* sel: selection bias
* if SELECT, selected vertice are given a 5 pixel bias to make them farter than unselect verts
* if 0, unselected vertice are given the bias
* strict: if 1, the vertice corresponding to the sel parameter are ignored and not just biased
*/
merge with 2.5 at revision 18432, made bmesh compile, and also made msvc use incremental linking under scons
2009-01-09 18:32:33 +00:00
extern EditVert *findnearestvert(struct ViewContext *vc, int *dist, short sel, short strict);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_tools.c */
#define SUBDIV_SELECT_ORIG 0
#define SUBDIV_SELECT_INNER 1
#define SUBDIV_SELECT_INNER_SEL 2
#define SUBDIV_SELECT_LOOPCUT 3
void join_triangles(EditMesh *em);
int removedoublesflag(EditMesh *em, short flag, short automerge, float limit); /* return amount */
2.5 From the anti-globalization department: G.obedit terminated! Wherever possible, use CTX_data_edit_object(C) to get this now. It's stored in scene now, and the screen context has it defined.
2009-01-02 19:10:35 +00:00
void esubdivideflag(Object *obedit, EditMesh *em, int flag, float rad, int beauty, int numcuts, int seltype);
merge with trunk. also tried to fix tesselator code; new code should've worked, but there's still some problems, possibly not in the tesselator code entirely. also still have reverted tools/Blender.py since scons still isn't fixed, heh.
2009-02-28 12:49:18 +00:00
int EdgeSlide(EditMesh *em, struct wmOperator *op, short immediate, float imperc);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
subdivides are now grouped in a menu - WKEY
2009-01-19 18:36:54 +00:00
void MESH_OT_subdivs(struct wmOperatorType *ot);
added ops for subdivide, subdiv multi, subdiv smooth, subdiv fractal
2009-01-16 04:48:33 +00:00
void MESH_OT_subdivide(struct wmOperatorType *ot);
void MESH_OT_subdivide_multi(struct wmOperatorType *ot);
void MESH_OT_subdivide_multi_fractal(struct wmOperatorType *ot);
void MESH_OT_subdivide_smooth(struct wmOperatorType *ot);
remove doubles op, ton: is this working properly?
2009-01-23 03:07:07 +00:00
void MESH_OT_removedoublesflag(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_extrude(struct wmOperatorType *ot);
spin mesh is alt Rkey - ton, please check and advise regarding screw_mesh and defaults. F3 fails while pressed continuously
2009-02-16 20:04:01 +00:00
void MESH_OT_spin(struct wmOperatorType *ot);
working yet preliminary (like everything) screw mesh. in irc there was a discussion about setting the screw axis outside of the function, but someone else should do that.
2009-02-18 03:01:45 +00:00
void MESH_OT_screw(struct wmOperatorType *ot);
editmesh face menu back, ctrl-pkey
2009-01-24 22:21:12 +00:00
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_fill(struct wmOperatorType *ot);
editmesh face menu back, ctrl-pkey
2009-01-24 22:21:12 +00:00
void MESH_OT_beauty_fill(struct wmOperatorType *ot);
void MESH_OT_convert_quads_to_tris(struct wmOperatorType *ot);
void MESH_OT_convert_tris_to_quads(struct wmOperatorType *ot);
void MESH_OT_edge_flip(struct wmOperatorType *ot);
- Converted mesh face popup menu to use brecht's toolbox function (like the image view toolbox) Rather then having a hard coded popup menu with events that call other operators exec functions, operator names are given to the toolbox where it displays the operator name and shortcut. This means the real operator is registered rather then the one that called it. Im not sure about the location for the operator though, at the moment its called VIEW3D_OT_editmesh_face_toolbox() in view3d_header.c since the image editor toolbox is in the header file too. In a way it makes sense because this menu should eventually be in the header. - Change shortcut to Ctrl+F as it is in 2.4x - Added a number of operators that were not being registered - MESH_OT_fill_mesh, beauty_fill, convert_quads_to_tris, convert_tris_to_quads, edge_flip, mesh_set_smooth_faces, mesh_set_solid_faces - Renamed redundant MESH_OT_mesh_set_smooth_faces() to MESH_OT_faces_shade_smooth(), same for solid.
2009-02-01 04:22:18 +00:00
void MESH_OT_faces_shade_smooth(struct wmOperatorType *ot);
void MESH_OT_faces_shade_solid(struct wmOperatorType *ot);
edit_tools ops - starting from 4key up to 8key, ctrl and alt. ton: please check if working (especially uv and color functions)
2009-02-07 23:20:36 +00:00
void MESH_OT_split_mesh(struct wmOperatorType *ot);
void MESH_OT_extrude_repeat(struct wmOperatorType *ot);
void MESH_OT_edge_rotate_selected(struct wmOperatorType *ot);
void MESH_OT_loop_to_region(struct wmOperatorType *ot);
void MESH_OT_region_to_loop(struct wmOperatorType *ot);
void MESH_OT_rotate_uvs(struct wmOperatorType *ot);
void MESH_OT_mirror_uvs(struct wmOperatorType *ot);
void MESH_OT_rotate_colors(struct wmOperatorType *ot);
void MESH_OT_mirror_colors(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_delete(struct wmOperatorType *ot);
2.5 - Mesh Rip back (Vkey). For those who keep wondering how it works: just put mouse cursor somewhere close to the selection, press V and mouse mouse away from it. Feels like real rip! - Made extrude sorta work, no menu/options yet though. But it does transform! - Added an short event->mval[2] with region coords, easier coding for the guys :) - Fill operator standard delivers 'beauty' now
2009-02-19 19:03:53 +00:00
void MESH_OT_rip(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
#endif // MESH_INTERN_H
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
Copy Permalink