archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
86e192ea40ececcade256e528c557d9018751cb8
blender-archive/source/blender/src/space.c

5589 lines
145 KiB
C
Raw Normal View History

Initial revision
2002-10-12 11:37:38 +00:00
/**
* $Id$
*
* ***** BEGIN GPL/BL DUAL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version. The Blender
* Foundation also sells licenses for use in proprietary software under
* the Blender License. See http://www.blender.org/BL/ for information
* about this.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
* ***** END GPL/BL DUAL LICENSE BLOCK *****
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
*
*
* - here initialize and free and handling SPACE data
Initial revision
2002-10-12 11:37:38 +00:00
*/
#include <string.h>
#include <stdio.h>
updated .c files to include: #ifdef HAVE_CONFIG_H #include <config.h> #endif Just need to finish cpp files now :) Kent -- mein@cs.umn.edu
2002-11-25 12:02:15 +00:00
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
Initial revision
2002-10-12 11:37:38 +00:00
#include "MEM_guardedalloc.h"
* Adds configuration buttons for ffmpeg-output * Large sequencer rewrite to support: - Audio-tracks, which are not completely loaded into memory (hdaudio) but kept on disk instead. - A dependency tree, that builds only the Imbufs, that are really needed - Cleaner sequencer code - Per instance data in sequencer plugins (without this, the Dynamic Noise Reduction plugin would be impossible) - A Luma Waveform display - A U/V scatter plot display - Memcache limiting in sequencer - Buttons changed according to the boosted framecount limit
2006-02-05 19:30:37 +00:00
#include "MEM_CacheLimiterC-Api.h"
Initial revision
2002-10-12 11:37:38 +00:00
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
#ifdef INTERNATIONAL
#include "BIF_language.h"
#endif
Initial revision
2002-10-12 11:37:38 +00:00
#include "IMB_imbuf_types.h"
#include "IMB_imbuf.h"
#include "BLI_blenlib.h"
#include "BLI_arithb.h"
#include "BLI_linklist.h"
#include "DNA_action_types.h"
Armature "Envelope" editing. For defining the deformation distances of Bones, three values are being used now. The bone tip and root radius define the bone-shape itself and the "dist" defines the soft area around it. A full (user) doc is in CMS here; http://www.blender3d.org/cms/Armature_Envelopes.647.0.html Note: todo still is allowing both Vertex Deform Groups and these Envelopes together (and or per Bone). Also part of this commit is: - New: Hiding bones in EditMode. This is a separate 'hide flag', so you can keep the PoseMode hidden Bones separate from EditMode. (In the future we should do some kind of bone-grouping or so) - While transform(), the hotkeys G,R,S only switch mode when the previous mode was compatible. Caused conflicts with Crease/BoneDist/etc. - Deleting the last VertexGroup now also deletes the entire Mesh 'dvert' data. Sounds logical, but remember that VertexGroups are partial on a Mesh, partial on Object. Weird design decision though... Anyhoo, at this moment the only way to have Bone Envelopes deform, is by deleting all VertexGroups! - In PoseMode, the hotkey ALT+S now does both B-Bone size or Envelope, depending draw type. - In EditMode, Extrude now also works when only Root points were selected. - Weight editing is also symmetrical btw, with the "X-axis Mirror" option set.
2005-08-19 12:35:15 +00:00
#include "DNA_armature_types.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "DNA_curve_types.h"
Added "select same group" to select group menu.
2006-02-09 15:14:19 +00:00
#include "DNA_group_types.h" /* used for select_same_group */
Initial revision
2002-10-12 11:37:38 +00:00
#include "DNA_image_types.h"
#include "DNA_ipo_types.h"
#include "DNA_mesh_types.h"
malefico's request when working with many hook objects- Select Grouped -> Hook Siblings (Deform Same Data)
2006-10-09 17:56:00 +00:00
#include "DNA_modifier_types.h" /* used for select grouped hooks */
Initial revision
2002-10-12 11:37:38 +00:00
#include "DNA_object_types.h"
#include "DNA_scene_types.h"
#include "DNA_screen_types.h"
#include "DNA_sequence_types.h"
#include "DNA_sound_types.h"
#include "DNA_space_types.h"
#include "DNA_userdef_types.h"
#include "DNA_view2d_types.h"
#include "DNA_view3d_types.h"
#include "BKE_blender.h"
Orange: and now for the real exr fun: float buffer support in Image window! Image as loaded in Blender (from openexr.com): http://www.blender.org/bf/exrcurve1.jpg Image with different white point: http://www.blender.org/bf/exrcurve2.jpg Image with white and black point and a curve: http://www.blender.org/bf/exrcurve3.jpg Use SHIFT+click to set the black point, and CTRL+click for white point. The buttons in the panel work too, of course. The curves work after the black/white range was corrected, so you can stick to curves with a normal 0-1 range. There's also now a general color curve, marked with 'C' button. Note; this currently only maps the float colors to a visible 8 bits per channel rect. You can save it, but when the blender file loads the curve or mapping is not executed until you click in the curves... have to look at that still. Speed for this is also quite unoptimized... still WIP, but fun!
2006-01-09 23:52:51 +00:00
#include "BKE_colortools.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BKE_curve.h"
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
#include "BKE_depsgraph.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BKE_displist.h"
#include "BKE_global.h"
Weekly cleanup in my precious blender tree :) Unused variables, missing prototypes mostly.
2006-02-14 11:46:45 +00:00
#include "BKE_group.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BKE_ipo.h"
#include "BKE_main.h"
Orange: - Sunday merger with bf-blender - Foundations for new Node editor in Blender, generic framework that can be used for Material/Texture, Compositing, Logic or maybe even Sequencer. Note: this doesn't do anything yet, nor save! Is just to get this nice in CVS now. :)
2005-12-18 13:46:01 +00:00
#include "BKE_node.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BKE_scene.h"
#include "BKE_utildefines.h"
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
#include "BIF_spacetypes.h" /* first, nasty dependency with typedef */
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
#include "BIF_butspace.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BIF_drawimage.h"
#include "BIF_drawseq.h"
#include "BIF_drawtext.h"
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
#include "BIF_drawscript.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BIF_editarmature.h"
New: Hotkey/menu access in 3D window to add constraints. Works in PoseMode as well as for Objects. Hotkey: CTRL+ALT+C (bit clumsy I know, but I like to use the Ckey). Constraints are added to the active Object or Bone. Based on selection context, the menu has three versions: Pose Mode: - if another bone is selected, bone becomes target - else if another Object is selected, Object becomes target - else it adds a new Empty as target Object Mode - if another Object is selected: Object becomes target - else it adds a new Empty as target Same works this way now for CTRL+I, "Add IK". To be solved: ALT+C in PoseMode is "Clear Constraints", but in Object Mode it does "Convert" still...
2005-10-23 12:18:32 +00:00
#include "BIF_editconstraint.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BIF_editfont.h"
Orange: tuesday sync with bf-blender
2005-12-06 10:58:54 +00:00
#include "BIF_editgroup.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BIF_editkey.h"
#include "BIF_editlattice.h"
#include "BIF_editmesh.h"
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
#include "BIF_editmode_undo.h"
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
#include "BIF_editnla.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BIF_editoops.h"
#include "BIF_editseq.h"
#include "BIF_editsima.h"
#include "BIF_editsound.h"
#include "BIF_editview.h"
#include "BIF_gl.h"
#include "BIF_imasel.h"
#include "BIF_interface.h"
Part one of editmesh.c refactoring. The huge file has been split in logical parts, and include files altered to denote internal and external functions. include/editmesh.h: internal calls for editmesh_xxx.c files include/BIF_editmesh.h: external calls for these files src/editmesh.c: basic alloc/lists and in/out editmode, undo, separate src/editmesh_lib.c: basic utility calls for all editmesh_xxx.c (no UI) src/editmesh_add.c: add prim, add duplicate, add vertex/edge/face (UI) src/editmesh_mods.c: selecting, transforming (UI) src/editmesh_loop.c: loop tools like knife, loop select, loop subdiv (UI) src/editmesh_tools.c: other tools (extrude, spin, etc) (UI) And a new file: src/meshtools.c: tools for Mesh outside of editmode (normals, draw flags)
2004-09-19 11:47:49 +00:00
#include "BIF_meshtools.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BIF_mywindow.h"
#include "BIF_oops.h"
Armature-Pose IK goodies! - Added option to the IK buttons, to have it use the 'tip' as end of the IK chain. I never really understood this old convention (IK didn't work on the Bone itself). Old files still will read OK though. But I made the "To Tip" a default when adding new IK constraints. - Hotkey CTRL+I: add IK, with option to have it adding an Empty target, or use a selected Bone as target. With the new non-modal PoseMode, it gives instant access to playing with the IK chain. - Hotkey ALT+I: clears IK, on all selected Bones - Hotkey ALT+C: clears Constraints on all selected Bones (incl IK)
2005-07-24 11:36:05 +00:00
#include "BIF_poseobject.h"
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
#include "BIF_outliner.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BIF_resources.h"
#include "BIF_screen.h"
#include "BIF_space.h"
#include "BIF_toets.h"
#include "BIF_toolbox.h"
#include "BIF_usiblender.h"
#include "BIF_previewrender.h"
#include "BSE_edit.h"
#include "BSE_view.h"
#include "BSE_editipo.h"
#include "BSE_drawipo.h"
#include "BSE_drawview.h"
#include "BSE_drawnla.h"
#include "BSE_filesel.h"
#include "BSE_headerbuttons.h"
#include "BSE_editnla_types.h"
#include "BDR_vpaint.h"
#include "BDR_editmball.h"
#include "BDR_editobject.h"
#include "BDR_editcurve.h"
#include "BDR_editface.h"
#include "BDR_drawmesh.h"
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
#include "BDR_drawobject.h"
- Imagepaint code cleanup: - Move UVTEXTTOOL variables into global Gip struct (like Gvp for vertex paint). This will probably be moved into SpaceImage later, so it is saved with the .blend file. - Disable tool drawing. a better solution needs to be found. - Panel button layout is still the same, this will change. - Removed the NAN_TPT define, it has no use anymore.
2005-09-16 20:17:09 +00:00
#include "BDR_imagepaint.h"
Added LSCM UV Unwrapping: http://www.loria.fr/~levy/Galleries/LSCM/index.html http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf Implementation Least Squares Conformal Maps parameterization, based on chapter 2 of: Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002, July 2002. Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define where a mesh will be cut when executing LSCM unwrapping. Seams can be marked and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark the selected edges as seams. Select Linked in Face Select Mode now only selects linked faces if no seams separate them. So if seams are defined, this will now select the 'face group' defined by the seams. Hotkey is still LKEY. LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local angles). Based on seams, the selected faces will be 'cut'. If multiple 'face groups' are selected, they will be unwrapped separately and packed in the image rectangle in the UV Editor. Packing uses a simple and fast algorithm, only designed to avoid having overlapping faces. LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel. Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then executed, these UV's will stay in place, allowing to tweak the solution. PKEY and ALT+PKEY will respectively pin and unpin selected UV's. Face Select Mode Drawing Changes: - Draw Seams option to enable disable drawing of seams - Draw Faces option to enable drawing of selected faces in transparent purple - Draw Hidden Edges option to enable drawing of edges of hidden faces - Draw Edges option to enable drawing of edges of visible faces The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
#include "BDR_unwrapper.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BLO_readfile.h" /* for BLO_blendhandle_close */
Added new option: In renderwindow, press AKEY to see the alpha in B&W. Another AKEY shows normal RGB again. This uses glColorMask, an opengl 1.0 function. Really needed it for debugging alpha in rendering. :)
2004-12-02 21:22:17 +00:00
#include "PIL_time.h"
Added all necessary BPY_extern.h include files to the .c files. Updated the Make environment to point to the correct location. The include paths were still pointing to source/blender/bpython/include while it should be source/blender/python. I did not encounter the build problems because I'm always working with the autoconf build environment.
2003-11-23 14:28:46 +00:00
#include "BPY_extern.h"
More compositing goodies. - Texture Node Allows to use any Blender Texture block as input for masks or color blending. The texture node doesn't generate a real image, but adjusts to the size as mapped with during an operation. So it won't work to use it as Image input for Blur or Filter nodes. Note; the Vector inputs for this node only work with manual input now! - Translation Node Give any image an offset in X or Y direction For the Texture node to work, I needed to move the central 'pixel processor' up one level... to allow differently sized images to merge and allow 'procedural images' without size. Temporal image of the day: http://www.blender.org/bf/rt.jpg
2006-02-19 14:55:16 +00:00
#include "butspace.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "mydevice.h"
#include "blendef.h"
#include "datatoc.h"
Making transform's code more Blenderish with a proper extern include file (BIF_transform.h) and extern function calls (BIF_*). On a side note, Shear was fixed in last commit, just forgot to mention it. It wasn't acting correctly in Edit Mode (and Desoto was poking me about it every sunday).
2005-02-20 01:25:10 +00:00
#include "BIF_transform.h"
Initial new transform commit. Disabled behind defines. Uncomment //#define NEWTRANSFORM in transform.h to enable. Use at your own risk For more info, see Wiki: http://wiki.blender.org/bin/view.pl/Blenderdev/TransformRefactoring And tuhopuu mailing list: http://projects.blender.org/pipermail/tuhopuu-devel/ Notes for Ton (things that could need bulldozing: - TransData conversions. Objects is ok, but others could be rechecked. (some still use totsel). Need to add pose mode support. - Need more icons in the PET mode dropdown (in the 3D view header) for the new modes - Add new transform calls to Toolbox and Menus and the one right after Extrude. That's pretty much all I can think of now.
2005-02-14 02:53:36 +00:00
Dependency graph patch, provided by Jean-Luc Peuriere. Works like a charm... well it now replaces the old base-sorting hack. :) Next stage will be to define how to further integrate it. Plus some minor code cleanups... static/internal functions versus external, etc.
2005-04-30 21:27:05 +00:00
#include "BKE_depsgraph.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BSE_trans_types.h"
#include "SYS_System.h" /* for the user def menu ... should move elsewhere. */
new game-menu option 'Record Game Physics to Ipo' including implementation. hope it works, and doesn't break to much. it bakes physics objects transform into ipo, every frame of the running gameengine. When you disable and run the game again, it clears the ipo's again. just for physics objects at the moment. (perhaps some better UI in the future?)
2005-08-23 13:16:02 +00:00
extern void StartKetsjiShell(ScrArea *area, char* startscenename, struct Main* maggie, struct SpaceIpo* sipo,int always_use_expand_framing);
Initial revision
2002-10-12 11:37:38 +00:00
/**
* When the mipmap setting changes, we want to redraw the view right
* away to reflect this setting.
*/
void space_mipmap_button_function(int event);
void free_soundspace(SpaceSound *ssound);
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
/* *************************************** */
/* don't know yet how the handlers will evolve, for simplicity
i choose for an array with eventcodes, this saves in a file!
*/
- More code for handling Panels in other windows. Added the 'Nkey' object menu as Panel now. Live updates, whoohoo! closing them, minimizing, etc will follow. first bring back vertex selection :)
2003-10-15 16:01:08 +00:00
void add_blockhandler(ScrArea *sa, short eventcode, short val)
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
{
SpaceLink *sl= sa->spacedata.first;
short a;
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
/* find empty spot */
- More code for handling Panels in other windows. Added the 'Nkey' object menu as Panel now. Live updates, whoohoo! closing them, minimizing, etc will follow. first bring back vertex selection :)
2003-10-15 16:01:08 +00:00
for(a=0; a<SPACE_MAXHANDLER; a+=2) {
- further work on view3d panels: - you can close them (x icon) or press ESC - option to open panel at mouse location (try Nkey) - using 'collapse' (triangle icon) stows header in bottom - opening again restores at old location - dragging panels or zooming clips nicely with window evaluate: an 'auto close' when mouse goes outside panel Warning: vertex selecting still broken! :) It's 2 am now, bedtime...
2003-10-16 00:17:24 +00:00
if( sl->blockhandler[a]==eventcode ) {
sl->blockhandler[a+1]= val;
break;
}
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
else if( sl->blockhandler[a]==0) {
sl->blockhandler[a]= eventcode;
- More code for handling Panels in other windows. Added the 'Nkey' object menu as Panel now. Live updates, whoohoo! closing them, minimizing, etc will follow. first bring back vertex selection :)
2003-10-15 16:01:08 +00:00
sl->blockhandler[a+1]= val;
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
break;
}
}
- More code for handling Panels in other windows. Added the 'Nkey' object menu as Panel now. Live updates, whoohoo! closing them, minimizing, etc will follow. first bring back vertex selection :)
2003-10-15 16:01:08 +00:00
if(a==SPACE_MAXHANDLER) printf("error; max (4) blockhandlers reached!\n");
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
}
void rem_blockhandler(ScrArea *sa, short eventcode)
{
SpaceLink *sl= sa->spacedata.first;
short a;
- More code for handling Panels in other windows. Added the 'Nkey' object menu as Panel now. Live updates, whoohoo! closing them, minimizing, etc will follow. first bring back vertex selection :)
2003-10-15 16:01:08 +00:00
for(a=0; a<SPACE_MAXHANDLER; a+=2) {
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
if( sl->blockhandler[a]==eventcode) {
sl->blockhandler[a]= 0;
Compositing workflow upgrade; You now can set a Preview panel in the Image window, to define a sub-rect of an image to be processed. Works like the preview in 3D Window. Just press SHIFT+P to get it activated. Very nice speedup! This is how it works: - The compositor still uses the scene image size (including % setting) for Viewer or Composite output size - If a preview exists, it calculates the cropped rect from its position in the Image window, and stores that in the Scene render data - On composite execute, it copies only this part from the 'generator nodes', right now Images or Render Results. That makes the entire composite tree only using small rects, so it will execute fast. - Also the render window will only display the cropped rect, and on F12 only the cropped part is being executed - On rendering in background mode, the cropping is ignored though. Usability notes: - translating or zooming view will automatically invoke a recalculation - if you zoom in on details, the calculated rect will even become smaller - only one Imagewindow can have this Preview Panel, to prevent conflicts of what the cropped area should be. Compositing is on Scene level, not local per image window. (Note; 3D Previews are local per window!) - Closing the preview panel will invoke a full-size recalculation - All passes/layers from rendering are nicely cropped, including Z and vectors. The work to make the compositor do cropping was simple, but getting the Image window displaying correctly and get all events OK was a lot of work... indeed, we need to refactor Image Window usage once. Sorry for making the mess even bigger now. :) I've tried not to interfere with UV edit or Paint though... only when you're in compositing mode the panel will work. BUG fix: 3D Preview render didn't work when multiple layers were set in the current scene.
2006-02-09 11:07:04 +00:00
/* specific free calls */
if(eventcode==IMAGE_HANDLER_PREVIEW)
image_preview_event(0);
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
break;
}
}
}
Popular request: the floating panels (NKEY) now close on a 2nd NKEY command. This for all current NKEY menus by default. Can be standard for each hotkey controlled Panel from now on; use toggle_blockhandler() for it. Another popular request: hotkey enabled Panels now optionally reopen on the previous location, instead of under mouse. This option "Pinned" is a user option now. Optional for later; have it as per-panel option... dunno! The last request, close on mouse-exit, won't be implemented, this intrudes with Panel consistancy, and is pretty OK solved with NKEY-NKEY now.
2004-06-19 12:25:28 +00:00
void toggle_blockhandler(ScrArea *sa, short eventcode, short val)
{
SpaceLink *sl= sa->spacedata.first;
short a, addnew=1;
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
/* find if it exists */
Popular request: the floating panels (NKEY) now close on a 2nd NKEY command. This for all current NKEY menus by default. Can be standard for each hotkey controlled Panel from now on; use toggle_blockhandler() for it. Another popular request: hotkey enabled Panels now optionally reopen on the previous location, instead of under mouse. This option "Pinned" is a user option now. Optional for later; have it as per-panel option... dunno! The last request, close on mouse-exit, won't be implemented, this intrudes with Panel consistancy, and is pretty OK solved with NKEY-NKEY now.
2004-06-19 12:25:28 +00:00
for(a=0; a<SPACE_MAXHANDLER; a+=2) {
if( sl->blockhandler[a]==eventcode ) {
sl->blockhandler[a]= 0;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* specific free calls */
if(eventcode==VIEW3D_HANDLER_PREVIEW)
New: - ZTransp render now also delivers Z values and Speed vectors in passes Note that speed vectors accumulate within a pixel to store the minimum, so rendering ztransp on top of a non-moving plane won't give speed... Best results you get is by rendering it in a separate layer. The Z value stored is the closest visible transparent face in the pixel. Fixes: - Render to 'spare page' has been enabled again. Because of the strict separation of Render and UI, but especially because a 'render result' now can consist of unlimited images, I've not made this a Render feature. Instead, the render-window itself stores the 'spare' image... I also had to change the convention for it a bit. Now, instead of having two "render buffers" (which was a render feature), the RenderWindow will store each previous frame on a re-render. This storing will only start after you've pressed 'Jkey' once, but then always will happen for as long the rendered image is same size as previously. For clarity, I've also renamed the window title, to 'previous frame'. - RenderWindow shows alpha again on Akey - Display of the Zvalues in ImageWindow has been tweaked. White now denotes closest, and the color range goes from camera clip-sta to clip-end. - Bugfix: on splitting/merging/duplicating windows, the 3D Previewrender was not always freed correctly, potentially causing crashes or memory leaks.
2006-02-08 16:51:09 +00:00
BIF_view3d_previewrender_free(sa->spacedata.first);
Compositing workflow upgrade; You now can set a Preview panel in the Image window, to define a sub-rect of an image to be processed. Works like the preview in 3D Window. Just press SHIFT+P to get it activated. Very nice speedup! This is how it works: - The compositor still uses the scene image size (including % setting) for Viewer or Composite output size - If a preview exists, it calculates the cropped rect from its position in the Image window, and stores that in the Scene render data - On composite execute, it copies only this part from the 'generator nodes', right now Images or Render Results. That makes the entire composite tree only using small rects, so it will execute fast. - Also the render window will only display the cropped rect, and on F12 only the cropped part is being executed - On rendering in background mode, the cropping is ignored though. Usability notes: - translating or zooming view will automatically invoke a recalculation - if you zoom in on details, the calculated rect will even become smaller - only one Imagewindow can have this Preview Panel, to prevent conflicts of what the cropped area should be. Compositing is on Scene level, not local per image window. (Note; 3D Previews are local per window!) - Closing the preview panel will invoke a full-size recalculation - All passes/layers from rendering are nicely cropped, including Z and vectors. The work to make the compositor do cropping was simple, but getting the Image window displaying correctly and get all events OK was a lot of work... indeed, we need to refactor Image Window usage once. Sorry for making the mess even bigger now. :) I've tried not to interfere with UV edit or Paint though... only when you're in compositing mode the panel will work. BUG fix: 3D Preview render didn't work when multiple layers were set in the current scene.
2006-02-09 11:07:04 +00:00
else if(eventcode==IMAGE_HANDLER_PREVIEW)
image_preview_event(0);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
Popular request: the floating panels (NKEY) now close on a 2nd NKEY command. This for all current NKEY menus by default. Can be standard for each hotkey controlled Panel from now on; use toggle_blockhandler() for it. Another popular request: hotkey enabled Panels now optionally reopen on the previous location, instead of under mouse. This option "Pinned" is a user option now. Optional for later; have it as per-panel option... dunno! The last request, close on mouse-exit, won't be implemented, this intrudes with Panel consistancy, and is pretty OK solved with NKEY-NKEY now.
2004-06-19 12:25:28 +00:00
addnew= 0;
}
}
if(addnew) add_blockhandler(sa, eventcode, val);
}
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
/* ************* SPACE: VIEW3D ************* */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
/* extern void drawview3dspace(ScrArea *sa, void *spacedata); BSE_drawview.h */
Initial revision
2002-10-12 11:37:38 +00:00
void copy_view3d_lock(short val)
{
bScreen *sc;
int bit;
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* from G.scene copy to the other views */
Initial revision
2002-10-12 11:37:38 +00:00
sc= G.main->screen.first;
while(sc) {
if(sc->scene==G.scene) {
ScrArea *sa= sc->areabase.first;
while(sa) {
SpaceLink *sl= sa->spacedata.first;
while(sl) {
if(sl->spacetype==SPACE_OOPS && val==REDRAW) {
if(sa->win) scrarea_queue_winredraw(sa);
}
else if(sl->spacetype==SPACE_VIEW3D) {
View3D *vd= (View3D*) sl;
if(vd->scenelock && vd->localview==0) {
vd->lay= G.scene->lay;
vd->camera= G.scene->camera;
if(vd->camera==0 && vd->persp>1) vd->persp= 1;
if( (vd->lay & vd->layact) == 0) {
bit= 0;
while(bit<32) {
if(vd->lay & (1<<bit)) {
vd->layact= 1<<bit;
break;
}
bit++;
}
}
if(val==REDRAW && vd==sa->spacedata.first) {
- fixed bug that printed: "bad call to addqueue: 0 (18, 1)" when using layer buttons or the layer hotkeys 1-2-3-etc. was caused in space.c, view3dlock, untested call to addqueue.
2003-07-04 20:15:13 +00:00
if(sa->win) scrarea_queue_redraw(sa);
Initial revision
2002-10-12 11:37:38 +00:00
}
}
}
sl= sl->next;
}
sa= sa->next;
}
}
sc= sc->id.next;
}
}
Commit for the 4 aforementioned "features": - "Global Pivot": Maintains a global Pivot and Align mode setting for all 3d views when enabled, instead of seperate settings per 3d view - "Auto Perspective": Switch to ortho mode automatically on 1/3/7, and to Perspective when the view is rotated with the mouse - "Align mode": As suggested on the list, when enabled, transformations on several objects only transform their locations, not their sizes or rotations. - Grid dotted when not 1:1 ***ATTENTION***! The User Interface parts of these features have not been committed, as I work on my own modified UI here. The three features need toggle buttons to turn them on and off. I used the following 3 buttons (first two features are in userprefs, third as a 3d view setting): uiDefButBitS(block, TOG, USER_AUTOPERSP, B_DRAWINFO, "Auto Persp", (xpos+edgespace+(3*medprefbut)+(3*midspace)+smallprefbut+2),y3+10,smallprefbut,buth, &(U.uiflag), 0, 0, 0, 0, "Automatically switch between orthographic and perspective"); uiDefButBitS(block, TOG, USER_LOCKAROUND, B_DRAWINFO, "Global Pivot", (xpos+edgespace+(4*midspace)+(4*medprefbut)),y3+10,smallprefbut,buth, &(U.uiflag), 0, 0, 0, 0, "Use global pivot setting for all 3d views"); uiDefIconButS(block, TOG|BIT|10, B_AROUND, ICON_ALIGN, xco+=XIC,0,XIC,YIC, &G.vd->flag, 0, 0, 0, 0, "Translate only (align)"); Someone needs to add these to the interface in an appropriate manner! Thanks.
2004-07-15 13:31:18 +00:00
void handle_view3d_around()
{
bScreen *sc;
if ((U.uiflag & USER_LOCKAROUND)==0) return;
/* copies from G.vd->around to other view3ds */
sc= G.main->screen.first;
while(sc) {
if(sc->scene==G.scene) {
ScrArea *sa= sc->areabase.first;
while(sa) {
SpaceLink *sl= sa->spacedata.first;
while(sl) {
if(sl->spacetype==SPACE_VIEW3D) {
View3D *vd= (View3D*) sl;
if (vd != G.vd) {
vd->around= G.vd->around;
if (G.vd->flag & V3D_ALIGN)
vd->flag |= V3D_ALIGN;
else
vd->flag &= ~V3D_ALIGN;
scrarea_queue_headredraw(sa);
}
}
sl= sl->next;
}
sa= sa->next;
}
}
sc= sc->id.next;
}
}
Initial revision
2002-10-12 11:37:38 +00:00
void handle_view3d_lock()
{
if (G.vd != NULL) {
if(G.vd->localview==0 && G.vd->scenelock && curarea->spacetype==SPACE_VIEW3D) {
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* copy to scene */
Initial revision
2002-10-12 11:37:38 +00:00
G.scene->lay= G.vd->lay;
G.scene->camera= G.vd->camera;
copy_view3d_lock(REDRAW);
}
}
}
void space_set_commmandline_options(void) {
SYS_SystemHandle syshandle;
int a;
if ( (syshandle = SYS_GetSystem()) ) {
/* User defined settings */
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
a= (U.gameflags & USER_VERTEX_ARRAYS);
Initial revision
2002-10-12 11:37:38 +00:00
SYS_WriteCommandLineInt(syshandle, "vertexarrays", a);
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
a= (U.gameflags & USER_DISABLE_SOUND);
Initial revision
2002-10-12 11:37:38 +00:00
SYS_WriteCommandLineInt(syshandle, "noaudio", a);
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
a= (U.gameflags & USER_DISABLE_MIPMAP);
Initial revision
2002-10-12 11:37:38 +00:00
set_mipmap(!a);
SYS_WriteCommandLineInt(syshandle, "nomipmap", a);
/* File specific settings: */
/* Only test the first one. These two are switched
* simultaneously. */
a= (G.fileflags & G_FILE_SHOW_FRAMERATE);
SYS_WriteCommandLineInt(syshandle, "show_framerate", a);
SYS_WriteCommandLineInt(syshandle, "show_profile", a);
/* When in wireframe mode, always draw debug props. */
if (G.vd) {
a = ( (G.fileflags & G_FILE_SHOW_DEBUG_PROPS)
|| (G.vd->drawtype == OB_WIRE)
|| (G.vd->drawtype == OB_SOLID) );
SYS_WriteCommandLineInt(syshandle, "show_properties", a);
}
a= (G.fileflags & G_FILE_ENABLE_ALL_FRAMES);
SYS_WriteCommandLineInt(syshandle, "fixedtime", a);
new game-menu option 'Record Game Physics to Ipo' including implementation. hope it works, and doesn't break to much. it bakes physics objects transform into ipo, every frame of the running gameengine. When you disable and run the game again, it clears the ipo's again. just for physics objects at the moment. (perhaps some better UI in the future?)
2005-08-23 13:16:02 +00:00
a= (G.fileflags & G_FILE_GAME_TO_IPO);
SYS_WriteCommandLineInt(syshandle, "game2ipo", a);
Sorry to break the cvs-closed status, so if you really need to make a new 2.40 build, just disable the game engine if it doesn't compile for a platform. Again, sorry if this breaks non-windows platforms, but I hope people help to get this amazing fix working for all platforms. Armature-fixing contribution from Snailrose. Also lots of cool things from Snailrose and Lagan. Armatures are back Split screen Double sided lightning Ambient lighting Alpha test Material IPO support (one per object atm) Blender materials GLSL shaders - Python access Up to three texture samplers from the material panel ( 2D & Cube map ) Python access to a second set of uv coordinates See http://www.elysiun.com/forum/viewtopic.php?t=58057
2006-01-06 03:46:54 +00:00
a=(G.fileflags & G_FILE_GAME_MAT);
SYS_WriteCommandLineInt(syshandle, "blender_material", a);
applied Charlies patch for game engine graphics. display list support, and bumpmapping shader improvements.
2006-04-02 21:04:20 +00:00
a=(G.fileflags & G_FILE_DIAPLAY_LISTS);
SYS_WriteCommandLineInt(syshandle, "displaylists", a);
Sorry to break the cvs-closed status, so if you really need to make a new 2.40 build, just disable the game engine if it doesn't compile for a platform. Again, sorry if this breaks non-windows platforms, but I hope people help to get this amazing fix working for all platforms. Armature-fixing contribution from Snailrose. Also lots of cool things from Snailrose and Lagan. Armatures are back Split screen Double sided lightning Ambient lighting Alpha test Material IPO support (one per object atm) Blender materials GLSL shaders - Python access Up to three texture samplers from the material panel ( 2D & Cube map ) Python access to a second set of uv coordinates See http://www.elysiun.com/forum/viewtopic.php?t=58057
2006-01-06 03:46:54 +00:00
new game-menu option 'Record Game Physics to Ipo' including implementation. hope it works, and doesn't break to much. it bakes physics objects transform into ipo, every frame of the running gameengine. When you disable and run the game again, it clears the ipo's again. just for physics objects at the moment. (perhaps some better UI in the future?)
2005-08-23 13:16:02 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
}
}
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
#if GAMEBLENDER == 1
Initial revision
2002-10-12 11:37:38 +00:00
/**
* These two routines imported from the gameengine,
* I suspect a lot of the resetting stuff is cruft
* and can be removed, but it should be checked.
*/
static void SaveState(void)
{
glPushAttrib(GL_ALL_ATTRIB_BITS);
init_realtime_GL();
init_gl_stuff();
if(G.scene->camera==0 || G.scene->camera->type!=OB_CAMERA)
error("no (correct) camera");
waitcursor(1);
}
static void RestoreState(void)
{
curarea->win_swap = 0;
curarea->head_swap=0;
Header redraw added for 'select mode menu'. Also checked more files for it. Reminder, the allqueue() function needs as last arg a '1' if you want header to be refreshed too!
2004-10-01 10:10:09 +00:00
allqueue(REDRAWVIEW3D, 1);
Initial revision
2002-10-12 11:37:38 +00:00
allqueue(REDRAWBUTSALL, 0);
reset_slowparents();
waitcursor(0);
G.qual= 0;
glPopAttrib();
}
static LinkNode *save_and_reset_all_scene_cfra(void)
{
LinkNode *storelist= NULL;
Scene *sc;
for (sc= G.main->scene.first; sc; sc= sc->id.next) {
* F11 now nicely pops/pushes a window again * works (for OSX) only with the commit I did in Ghost 1 minute ago! * needs to be checked for all other OS's.
2003-07-09 16:02:39 +00:00
BLI_linklist_prepend(&storelist, (void*) (long) sc->r.cfra);
new game-menu option 'Record Game Physics to Ipo' including implementation. hope it works, and doesn't break to much. it bakes physics objects transform into ipo, every frame of the running gameengine. When you disable and run the game again, it clears the ipo's again. just for physics objects at the moment. (perhaps some better UI in the future?)
2005-08-23 13:16:02 +00:00
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
/* why is this reset to 1 ?*/
/* sc->r.cfra= 1;*/
Initial revision
2002-10-12 11:37:38 +00:00
set_scene_bg(sc);
}
BLI_linklist_reverse(&storelist);
return storelist;
}
static void restore_all_scene_cfra(LinkNode *storelist) {
LinkNode *sc_store= storelist;
Scene *sc;
for (sc= G.main->scene.first; sc; sc= sc->id.next) {
int stored_cfra= (int) sc_store->link;
sc->r.cfra= stored_cfra;
set_scene_bg(sc);
sc_store= sc_store->next;
}
BLI_linklist_free(storelist, NULL);
}
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
#endif
Initial revision
2002-10-12 11:37:38 +00:00
void start_game(void)
{
Bunch of small fixes emailed to me from phaethon Kent -- mein@cs.umn.edu
2002-11-29 17:07:58 +00:00
#if GAMEBLENDER == 1
I had misspelled a macro name.
2004-03-28 22:33:21 +00:00
#ifndef NO_KETSJI
Initial revision
2002-10-12 11:37:38 +00:00
Scene *sc, *startscene = G.scene;
LinkNode *scene_cfra_store;
/* XXX, silly code - the game engine can
* access any scene through logic, so we try
* to make sure each scene has a valid camera,
* just in case the game engine tries to use it.
*
* Better would be to make a better routine
* in the game engine for finding the camera.
* - zr
More work on render stuff! - Scene support in RenderLayers You now can indicate in Compositor to use RenderLayer(s) from other scenes. Use the new dropdown menu in the "Render Result" node. It will change the title of the node to indicate that. The other Scenes are rendered fully separate, creating own databases (and octrees) after the current scene was finished. They use their own render settings, with as exception the render output size (and optional border). This makes the option an interesting memory saver and speedup. Also note that the render-results of other scenes are kept in memory while you work. So, after a render, you can tweak all composit effects. - Render Stats Added an 'info string' to stats, printed in renderwindow header. It gives info now on steps "creating database", "shadow buffers", and "octree". - Bug fixes Added redraw event for Image window, when using compositor render. Text objects were not rendered using background render (probably a bug since depsgraph was added) Dropdown buttons in Node editor were not refreshed after usage Sometimes render window did not open, this due to wrong check for 'esc'. Removed option that renders view-layers on F12, with mouse in 3d window. Not only was it confusing, it's now more efficient with the Preview Panel, which does this nicely.
2006-02-04 13:28:50 +00:00
* Note: yes, this is all very badly hacked! (ton)
Initial revision
2002-10-12 11:37:38 +00:00
*/
for (sc= G.main->scene.first; sc; sc= sc->id.next) {
if (!sc->camera) {
Base *base;
for (base= sc->base.first; base; base= base->next)
if (base->object->type==OB_CAMERA)
break;
sc->camera= base?base->object:NULL;
}
}
/* these two lines make sure front and backbuffer are equal. for swapbuffers */
markdirty_all();
screen_swapbuffers();
/* can start from header */
mywinset(curarea->win);
scene_cfra_store= save_and_reset_all_scene_cfra();
Let the game engine manage it's own sound scene. This is to fix bug 1415 (Patch from Peter den Bak) http://projects.blender.org/tracker/index.php?func=detail&aid=1415&group_id=9&atid=125 Also release the OpenAL device & context. These were leaked before, and would cause an assertion.
2004-07-26 11:54:10 +00:00
/* game engine will do its own sounds. */
Initial revision
2002-10-12 11:37:38 +00:00
sound_stop_all_sounds();
Let the game engine manage it's own sound scene. This is to fix bug 1415 (Patch from Peter den Bak) http://projects.blender.org/tracker/index.php?func=detail&aid=1415&group_id=9&atid=125 Also release the OpenAL device & context. These were leaked before, and would cause an assertion.
2004-07-26 11:54:10 +00:00
sound_exit_audio();
Fix for slow starting of Blender. This was caused by calling sound_init_audio() at startup. In situations where Blender was first started, or when other applications used memory, this could take 5-15 seconds. I have moved the init call to 'start ketsji', and made sure any call to an audio play routine will invoke an init as well. Tested with engine and loading/play sound in F10 menu. I don't know how the BlenderPlayer handles it... should be investigated. Result: At OSX Blender starts in a second again! :)
2004-04-21 13:38:54 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
/* Before jumping into Ketsji, we configure some settings. */
space_set_commmandline_options();
SaveState();
new game-menu option 'Record Game Physics to Ipo' including implementation. hope it works, and doesn't break to much. it bakes physics objects transform into ipo, every frame of the running gameengine. When you disable and run the game again, it clears the ipo's again. just for physics objects at the moment. (perhaps some better UI in the future?)
2005-08-23 13:16:02 +00:00
StartKetsjiShell(curarea, startscene->id.name+2, G.main,G.sipo, 1);
Initial revision
2002-10-12 11:37:38 +00:00
RestoreState();
Cunning hack for Blender python module in the game engine - just don't unload it before running the game!
2004-05-21 09:27:42 +00:00
/* Restart BPY - unload the game engine modules. */
BPY_end_python();
BPython: - Blender.Window: added function GetPerspMatrix() (Tom Musgrave's patch, thanks); - added Chris Want's patch to tell argc, argv to the Python interpreter (thanks, Hos); - Blender.Image: added image.glFree() to free textures bound by the recently added image.glLoad() (both suggested by Campbell Barton -- thanks, with these Blender can be used to load textures for scripts); - Blender.Sound: removed for now at least a few get/set methods of vars that can't be accessed via interface; - renamed Get/makeActive to Get/setCurrent in Blender.World (actually added alias for now), same in Blender.Sound: renamed makeActive to setCurrent. Stephen Swaney pointed this some weeks ago, we should stick to one naming convention. - added documentation for Sound and Window.Theme modules and the other added functions, made other small updates. - Blender.Object: made 'worldspace' become the default output of .getMatrix and .mat/.matrix: after reading a discussion on blender.org's Python forum where eeshlo mentioned the pre 2.34 default was worldspace, I took a better look at Blender's relevant code, confirmed, talked to Theeth about this and as he suggested am changing the default back to 'worldspace'.
2004-10-20 05:51:24 +00:00
BPY_start_python(0, NULL); /* argc, argv stored there already */
Willian's patch for enabling the menus again. Kent
2004-07-29 19:10:52 +00:00
BPY_post_start_python(); /* userpref path and menus init */
Initial revision
2002-10-12 11:37:38 +00:00
restore_all_scene_cfra(scene_cfra_store);
set_scene_bg(startscene);
More work on render stuff! - Scene support in RenderLayers You now can indicate in Compositor to use RenderLayer(s) from other scenes. Use the new dropdown menu in the "Render Result" node. It will change the title of the node to indicate that. The other Scenes are rendered fully separate, creating own databases (and octrees) after the current scene was finished. They use their own render settings, with as exception the render output size (and optional border). This makes the option an interesting memory saver and speedup. Also note that the render-results of other scenes are kept in memory while you work. So, after a render, you can tweak all composit effects. - Render Stats Added an 'info string' to stats, printed in renderwindow header. It gives info now on steps "creating database", "shadow buffers", and "octree". - Bug fixes Added redraw event for Image window, when using compositor render. Text objects were not rendered using background render (probably a bug since depsgraph was added) Dropdown buttons in Node editor were not refreshed after usage Sometimes render window did not open, this due to wrong check for 'esc'. Removed option that renders view-layers on F12, with mouse in 3d window. Not only was it confusing, it's now more efficient with the Preview Panel, which does this nicely.
2006-02-04 13:28:50 +00:00
scene_update_for_newframe(G.scene, G.scene->lay);
- got rid of silly #define ..._BIT, #define ... (1<<..._BIT) stuff - switched almost all uiDefBut(..., TOG|BIT|..) to use UiDefButBit and the name of the actual bit define instead of just a magic constant, this makes searching the code much nicer. most of the credit here goes to LetterRip who did almost all of the conversions, I mostly just checked them over.
2005-08-03 18:48:22 +00:00
if (G.flags & G_FILE_AUTOPLAY)
Initial revision
2002-10-12 11:37:38 +00:00
exit_usiblender();
/* groups could have changed ipo */
allqueue(REDRAWNLA, 0);
allqueue(REDRAWACTION, 0);
allspace(REMAKEIPO, 0);
allqueue(REDRAWIPO, 0);
Added 2 options to the Makefiles (enable in environment, user-def.mk, or whatever): NAN_NO_KETSJI: when set to true, disables compilation of the game engine. NAN_JUST_BLENDERDYNAMIC: when set to true, only dynamic executable is build (i.e., no plugin, etc). Note that NAN_NO_KETSJI implies NAN_JUST_BLENDERDYNAMIC.
2004-03-21 19:59:51 +00:00
#endif
added a disabled notice when pressing PKEY and building without game engine.
2003-02-09 19:34:22 +00:00
#else
notice("Game engine is disabled in this release!");
Bunch of small fixes emailed to me from phaethon Kent -- mein@cs.umn.edu
2002-11-29 17:07:58 +00:00
#endif
Initial revision
2002-10-12 11:37:38 +00:00
}
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
static void changeview3dspace(ScrArea *sa, void *spacedata)
Initial revision
2002-10-12 11:37:38 +00:00
{
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
setwinmatrixview3d(sa->winx, sa->winy, NULL); /* 0= no pick rect */
Initial revision
2002-10-12 11:37:38 +00:00
}
/* Callable from editmode and faceselect mode from the
* moment, would be nice (and is easy) to generalize
* to any mode.
*/
static void align_view_to_selected(View3D *v3d)
{
* Big menus update Hard to describe other than by saying: * Updates, re-thought organisation, etc based on testing and feedback from 2.30 -> 2.31 * A *lot* of missing entries added * Toolbox expanded, tidied and more consistent with pulldown menus * A lot of functionality hidden behind secondary pupmenu()s is now exposed through arguments, so that they can be more easily explored from the pulldowns and toolbox. This is the reason for the many changed files in this commit - had to clean up editing functions. Mixing interface code in the middle of editing functionality is not good for menus and toolboxes. Please don't do it! At this stage, the menu and toolbox system (at least for most window spaces) should be just about 'stable' and 'complete'. It's now up to people to keep them up to date :)
2004-01-12 13:30:00 +00:00
int nr= pupmenu("Align View%t|To Selected (top)%x2|To Selected (front)%x1|To Selected (side)%x0");
Initial revision
2002-10-12 11:37:38 +00:00
if (nr!=-1) {
int axis= nr;
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if ((G.obedit) && (G.obedit->type == OB_MESH)) {
Initial revision
2002-10-12 11:37:38 +00:00
editmesh_align_view_to_selected(v3d, axis);
addqueue(v3d->area->win, REDRAW, 1);
} else if (G.f & G_FACESELECT) {
Object *obact= OBACT;
if (obact && obact->type==OB_MESH) {
Mesh *me= obact->data;
if (me->tface) {
faceselect_align_view_to_selected(v3d, me, axis);
addqueue(v3d->area->win, REDRAW, 1);
}
}
}
}
}
big warning hunt commit lot of casts, added prototypes, missing includes and some true errors
2005-03-09 19:45:59 +00:00
static void select_children(Object *ob, int recursive)
I know were in a freeze but this ones really small and I figured were not quite frozen yet ;) Anyway this was submitted by intrr and its just a small patch to allow you to select all children of an object with shift-p. Kent
2003-04-29 16:24:56 +00:00
{
Base *base;
for (base= FIRSTBASE; base; base= base->next)
if (ob == base->object->parent) {
base->flag |= SELECT;
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
base->object->flag |= SELECT;
if (recursive) select_children(base->object, 1);
I know were in a freeze but this ones really small and I figured were not quite frozen yet ;) Anyway this was submitted by intrr and its just a small patch to allow you to select all children of an object with shift-p. Kent
2003-04-29 16:24:56 +00:00
}
}
big warning hunt commit lot of casts, added prototypes, missing includes and some true errors
2005-03-09 19:45:59 +00:00
static void select_parent(void) /* Makes parent active and de-selected OBACT */
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
{
huge commit, sorry! this is part 1 of the UI makeover. It has: - menu system from Matt integrated - buttons drawing from Matt - generic button panel system implemented - converted displaybuttons (not the rest yet) - cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact. - cleaned loads of little compiler warnings, protos... still a lot of work needed, will all be in next week i hope! (warn: 2 new c files! butspace.c and buttons_scene.c)
2003-10-04 20:35:50 +00:00
Base *base, *startbase, *basact=NULL, *oldbasact;
Fix for crash in select_parent() - check for OBACT Thanks to Campbell for the last minute report!
2004-08-05 00:03:53 +00:00
if (!(OBACT) || !(OBACT->parent)) return;
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
BASACT->flag &= (~SELECT);
BASACT->object->flag &= (~SELECT);
startbase= FIRSTBASE;
if(BASACT && BASACT->next) startbase= BASACT->next;
base = startbase;
while(base) {
if(base->object==BASACT->object->parent) { basact=base; break; }
base=base->next;
Bug fix #2260 "Select group, Parent" menu crashed when parent was in other scene. Simply added extra check in code.
2005-03-01 14:03:59 +00:00
if(base==NULL) base= FIRSTBASE;
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
if(base==startbase) break;
}
Bug fix #2260 "Select group, Parent" menu crashed when parent was in other scene. Simply added extra check in code.
2005-03-01 14:03:59 +00:00
/* can be NULL if parent in other scene */
if(basact) {
oldbasact = BASACT;
BASACT = basact;
basact->flag |= SELECT;
basact->object->flag= basact->flag;
set_active_base(basact);
}
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
}
Added "select same group" to select group menu.
2006-02-09 15:14:19 +00:00
static void select_same_group(Object *ob) /* Select objects in the same group as the active */
{
Base *base;
Group *group= find_group(ob);
if (!group || !ob)
return;
changed select grouped hooks functionality- just select the hooks that use the active object. also speed up for select group, only find group status for unselected objects. Updated the select group menu in 3 places, the space bar menu was out missing some other group options also.
2006-10-09 18:56:02 +00:00
for (base= FIRSTBASE; base; base= base->next) {
if (!(base->flag & SELECT) && object_in_group(base->object, group)) {
Added "select same group" to select group menu.
2006-02-09 15:14:19 +00:00
base->flag |= SELECT;
base->object->flag |= SELECT;
}
changed select grouped hooks functionality- just select the hooks that use the active object. also speed up for select group, only find group status for unselected objects. Updated the select group menu in 3 places, the space bar menu was out missing some other group options also.
2006-10-09 18:56:02 +00:00
}
Added "select same group" to select group menu.
2006-02-09 15:14:19 +00:00
}
changed select grouped hooks functionality- just select the hooks that use the active object. also speed up for select group, only find group status for unselected objects. Updated the select group menu in 3 places, the space bar menu was out missing some other group options also.
2006-10-09 18:56:02 +00:00
static void select_object_hooks(Object *ob) /* Select objects in the same group as the active */
malefico's request when working with many hook objects- Select Grouped -> Hook Siblings (Deform Same Data)
2006-10-09 17:56:00 +00:00
{
changed select grouped hooks functionality- just select the hooks that use the active object. also speed up for select group, only find group status for unselected objects. Updated the select group menu in 3 places, the space bar menu was out missing some other group options also.
2006-10-09 18:56:02 +00:00
Base *base;
malefico's request when working with many hook objects- Select Grouped -> Hook Siblings (Deform Same Data)
2006-10-09 17:56:00 +00:00
ModifierData *md;
HookModifierData *hmd;
changed select grouped hooks functionality- just select the hooks that use the active object. also speed up for select group, only find group status for unselected objects. Updated the select group menu in 3 places, the space bar menu was out missing some other group options also.
2006-10-09 18:56:02 +00:00
malefico's request when working with many hook objects- Select Grouped -> Hook Siblings (Deform Same Data)
2006-10-09 17:56:00 +00:00
if (!ob)
return;
changed select grouped hooks functionality- just select the hooks that use the active object. also speed up for select group, only find group status for unselected objects. Updated the select group menu in 3 places, the space bar menu was out missing some other group options also.
2006-10-09 18:56:02 +00:00
for (md = ob->modifiers.first; md; md=md->next) {
if (md->type==eModifierType_Hook) {
hmd= (HookModifierData*) md;
if (hmd->object && !(hmd->object->flag & SELECT)) {
base= object_in_scene(hmd->object, G.scene);
base->flag |= SELECT;
base->object->flag |= SELECT;
malefico's request when working with many hook objects- Select Grouped -> Hook Siblings (Deform Same Data)
2006-10-09 17:56:00 +00:00
}
}
}
}
Added to select group- Siblings, ad Type This removes the need for the "Select Type" menu (please review Broken)
2006-04-02 15:40:56 +00:00
static void select_same_parent(Object *ob) /* Select objects woth the same parent as the active (siblings), parent can be NULL also */
{
Base *base;
if (!ob)
return;
for (base= FIRSTBASE; base; base= base->next)
if (base->object->parent==ob->parent) {
base->flag |= SELECT;
base->object->flag |= SELECT;
}
}
static void select_same_type(Object *ob) /* Select objects woth the same parent as the active (siblings), parent can be NULL also */
{
Base *base;
if (!ob)
return;
for (base= FIRSTBASE; base; base= base->next)
if (base->object->type==ob->type) {
base->flag |= SELECT;
base->object->flag |= SELECT;
}
}
Added select group meny to mesh editmode. Currently only works for faces. Try Shift+G in face/editmode.
2006-03-25 04:37:40 +00:00
void select_object_grouped(short nr)
* Big menus update Hard to describe other than by saying: * Updates, re-thought organisation, etc based on testing and feedback from 2.30 -> 2.31 * A *lot* of missing entries added * Toolbox expanded, tidied and more consistent with pulldown menus * A lot of functionality hidden behind secondary pupmenu()s is now exposed through arguments, so that they can be more easily explored from the pulldowns and toolbox. This is the reason for the many changed files in this commit - had to clean up editing functions. Mixing interface code in the middle of editing functionality is not good for menus and toolboxes. Please don't do it! At this stage, the menu and toolbox system (at least for most window spaces) should be just about 'stable' and 'complete'. It's now up to people to keep them up to date :)
2004-01-12 13:30:00 +00:00
{
Base *base;
Orange branch: Revived hidden treasure, the Groups! Previous experiment (in 2000) didn't satisfy, it had even some primitive NLA option in groups... so, cleaned up the old code (removed most) and integrated it back in a more useful way. Usage: - CTRL+G gives menu to add group, add to existing group, or remove from groups. - In Object buttons, a new (should become first) Panel was added, showing not only Object "ID button" and Parent, but also the Groups the Object Belongs to. These buttons also allow rename, assigning or removing. - To indicate Objects are grouped, they're drawn in a (not theme yet, so temporal?) green wire color. - Use ALT+SHIFT mouse-select to (de)select an entire group But, the real power of groups is in the following features: -> Particle Force field and Guide control In the "Particle Motion" Panel, you can indicate a Group name, this then limits force fields or guides to members of that Group. (Note that layers still work on top of that... not sure about that). -> Light Groups In the Material "Shaders" Panel, you can indicate a Group name to limit lighting for the Material to lamps in this group. The Lights in a Group do need to be 'visible' for the Scene to be rendered (as usual). -> Group Duplicator In the Object "Anim" Panel, you can set any Object (use Empty!) to duplicate an entire Group. It will make copies of all Objects in that Group. Also works for animated Objects, but it will copy the current positions or deforms. Control over 'local timing' (so we can do Massive anims!) will be added later. (Note; this commit won't render Group duplicators yet, a fix in bf-blender will enable that, next commit will sync) -> Library Appending In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed. By appending or linking the Group itself, and use the Group Duplicator, you now can animate and position linked Objects. The nice thing is that the local saved file itself will only store the Group name that was linked, so on a next file read, the Group Objects will be re-read as stored (changed) in the Library file. (Note; current implementation also "gives a base" to linked Group Objects, to show them as Objects in the current Scene. Need that now for testing purposes, but probably will be removed later). -> Outliner Outliner now shows Groups as optio too, nice to organize your data a bit too! In General, Groups have a very good potential... for example, it could become default for MetaBall Objects too (jiri, I can help you later on how this works). All current 'layer relationships' in Blender should be dropped in time, I guess...
2005-12-06 10:55:30 +00:00
Added to select group- Siblings, ad Type This removes the need for the "Select Type" menu (please review Broken)
2006-04-02 15:40:56 +00:00
if(nr==6) {
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
base= FIRSTBASE;
while(base) {
if (base->lay & OBACT->lay) {
base->flag |= SELECT;
base->object->flag |= SELECT;
}
base= base->next;
Added "select same group" to select group menu.
2006-02-09 15:14:19 +00:00
}
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
}
else if(nr==1) select_children(OBACT, 1);
Added to select group- Siblings, ad Type This removes the need for the "Select Type" menu (please review Broken)
2006-04-02 15:40:56 +00:00
else if(nr==2) select_children(OBACT, 0);
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
else if(nr==3) select_parent();
Added to select group- Siblings, ad Type This removes the need for the "Select Type" menu (please review Broken)
2006-04-02 15:40:56 +00:00
else if(nr==4) select_same_parent(OBACT);
else if(nr==5) select_same_type(OBACT);
else if(nr==7) select_same_group(OBACT);
changed select grouped hooks functionality- just select the hooks that use the active object. also speed up for select group, only find group status for unselected objects. Updated the select group menu in 3 places, the space bar menu was out missing some other group options also.
2006-10-09 18:56:02 +00:00
else if(nr==8) select_object_hooks(OBACT);
Added to select group- Siblings, ad Type This removes the need for the "Select Type" menu (please review Broken)
2006-04-02 15:40:56 +00:00
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
Small fixes, based on bugreports; - Toolbox item for shaded mode had wrong hotkey - Added countall() for select menu stuff (in 3d header, groupmenu) That way the stats in infoheader are updated. - Tooltip was wrong for X-axis mirror mode Armatures
2005-09-18 11:20:05 +00:00
countall();
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
allqueue(REDRAWVIEW3D, 0);
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
allqueue(REDRAWBUTSOBJECT, 0);
Added "Group selection" menu (SHIFT-G), which offers the following options: 1 - Children 2 - Immediate Children 3 - Parent 4 - Objects on shared layers 1: Selects all direct children of the active object 2: Select all children, children's children etc. of the active object 3: Makes the parent of the current object active, and deselects the active object 4: Selects all objects that share at least one layer with the active object Useful for stepping through object hierarchies and for quickly selecting objects belonging together. See my message on bf-committers as well.
2003-07-18 15:50:33 +00:00
allspace(REMAKEIPO, 0);
allqueue(REDRAWIPO, 0);
}
Added select group meny to mesh editmode. Currently only works for faces. Try Shift+G in face/editmode.
2006-03-25 04:37:40 +00:00
static void select_object_grouped_menu(void)
Orange branch: Revived hidden treasure, the Groups! Previous experiment (in 2000) didn't satisfy, it had even some primitive NLA option in groups... so, cleaned up the old code (removed most) and integrated it back in a more useful way. Usage: - CTRL+G gives menu to add group, add to existing group, or remove from groups. - In Object buttons, a new (should become first) Panel was added, showing not only Object "ID button" and Parent, but also the Groups the Object Belongs to. These buttons also allow rename, assigning or removing. - To indicate Objects are grouped, they're drawn in a (not theme yet, so temporal?) green wire color. - Use ALT+SHIFT mouse-select to (de)select an entire group But, the real power of groups is in the following features: -> Particle Force field and Guide control In the "Particle Motion" Panel, you can indicate a Group name, this then limits force fields or guides to members of that Group. (Note that layers still work on top of that... not sure about that). -> Light Groups In the Material "Shaders" Panel, you can indicate a Group name to limit lighting for the Material to lamps in this group. The Lights in a Group do need to be 'visible' for the Scene to be rendered (as usual). -> Group Duplicator In the Object "Anim" Panel, you can set any Object (use Empty!) to duplicate an entire Group. It will make copies of all Objects in that Group. Also works for animated Objects, but it will copy the current positions or deforms. Control over 'local timing' (so we can do Massive anims!) will be added later. (Note; this commit won't render Group duplicators yet, a fix in bf-blender will enable that, next commit will sync) -> Library Appending In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed. By appending or linking the Group itself, and use the Group Duplicator, you now can animate and position linked Objects. The nice thing is that the local saved file itself will only store the Group name that was linked, so on a next file read, the Group Objects will be re-read as stored (changed) in the Library file. (Note; current implementation also "gives a base" to linked Group Objects, to show them as Objects in the current Scene. Need that now for testing purposes, but probably will be removed later). -> Outliner Outliner now shows Groups as optio too, nice to organize your data a bit too! In General, Groups have a very good potential... for example, it could become default for MetaBall Objects too (jiri, I can help you later on how this works). All current 'layer relationships' in Blender should be dropped in time, I guess...
2005-12-06 10:55:30 +00:00
{
char *str;
short nr;
/* make menu string */
malefico's request when working with many hook objects- Select Grouped -> Hook Siblings (Deform Same Data)
2006-10-09 17:56:00 +00:00
str= MEM_mallocN(512, "groupmenu");
Orange branch: Revived hidden treasure, the Groups! Previous experiment (in 2000) didn't satisfy, it had even some primitive NLA option in groups... so, cleaned up the old code (removed most) and integrated it back in a more useful way. Usage: - CTRL+G gives menu to add group, add to existing group, or remove from groups. - In Object buttons, a new (should become first) Panel was added, showing not only Object "ID button" and Parent, but also the Groups the Object Belongs to. These buttons also allow rename, assigning or removing. - To indicate Objects are grouped, they're drawn in a (not theme yet, so temporal?) green wire color. - Use ALT+SHIFT mouse-select to (de)select an entire group But, the real power of groups is in the following features: -> Particle Force field and Guide control In the "Particle Motion" Panel, you can indicate a Group name, this then limits force fields or guides to members of that Group. (Note that layers still work on top of that... not sure about that). -> Light Groups In the Material "Shaders" Panel, you can indicate a Group name to limit lighting for the Material to lamps in this group. The Lights in a Group do need to be 'visible' for the Scene to be rendered (as usual). -> Group Duplicator In the Object "Anim" Panel, you can set any Object (use Empty!) to duplicate an entire Group. It will make copies of all Objects in that Group. Also works for animated Objects, but it will copy the current positions or deforms. Control over 'local timing' (so we can do Massive anims!) will be added later. (Note; this commit won't render Group duplicators yet, a fix in bf-blender will enable that, next commit will sync) -> Library Appending In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed. By appending or linking the Group itself, and use the Group Duplicator, you now can animate and position linked Objects. The nice thing is that the local saved file itself will only store the Group name that was linked, so on a next file read, the Group Objects will be re-read as stored (changed) in the Library file. (Note; current implementation also "gives a base" to linked Group Objects, to show them as Objects in the current Scene. Need that now for testing purposes, but probably will be removed later). -> Outliner Outliner now shows Groups as optio too, nice to organize your data a bit too! In General, Groups have a very good potential... for example, it could become default for MetaBall Objects too (jiri, I can help you later on how this works). All current 'layer relationships' in Blender should be dropped in time, I guess...
2005-12-06 10:55:30 +00:00
strcpy(str, "Select Grouped%t|Children%x1|"
"Immediate Children%x2|Parent%x3|"
Added to select group- Siblings, ad Type This removes the need for the "Select Type" menu (please review Broken)
2006-04-02 15:40:56 +00:00
"Siblings (Shared Parent)%x4|"
"Objects of Same Type%x5|"
"Objects on Shared Layers%x6|"
malefico's request when working with many hook objects- Select Grouped -> Hook Siblings (Deform Same Data)
2006-10-09 17:56:00 +00:00
"Objects in Same Group%x7|"
changed select grouped hooks functionality- just select the hooks that use the active object. also speed up for select group, only find group status for unselected objects. Updated the select group menu in 3 places, the space bar menu was out missing some other group options also.
2006-10-09 18:56:02 +00:00
"Object Hooks%x8|");
Orange branch: Revived hidden treasure, the Groups! Previous experiment (in 2000) didn't satisfy, it had even some primitive NLA option in groups... so, cleaned up the old code (removed most) and integrated it back in a more useful way. Usage: - CTRL+G gives menu to add group, add to existing group, or remove from groups. - In Object buttons, a new (should become first) Panel was added, showing not only Object "ID button" and Parent, but also the Groups the Object Belongs to. These buttons also allow rename, assigning or removing. - To indicate Objects are grouped, they're drawn in a (not theme yet, so temporal?) green wire color. - Use ALT+SHIFT mouse-select to (de)select an entire group But, the real power of groups is in the following features: -> Particle Force field and Guide control In the "Particle Motion" Panel, you can indicate a Group name, this then limits force fields or guides to members of that Group. (Note that layers still work on top of that... not sure about that). -> Light Groups In the Material "Shaders" Panel, you can indicate a Group name to limit lighting for the Material to lamps in this group. The Lights in a Group do need to be 'visible' for the Scene to be rendered (as usual). -> Group Duplicator In the Object "Anim" Panel, you can set any Object (use Empty!) to duplicate an entire Group. It will make copies of all Objects in that Group. Also works for animated Objects, but it will copy the current positions or deforms. Control over 'local timing' (so we can do Massive anims!) will be added later. (Note; this commit won't render Group duplicators yet, a fix in bf-blender will enable that, next commit will sync) -> Library Appending In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed. By appending or linking the Group itself, and use the Group Duplicator, you now can animate and position linked Objects. The nice thing is that the local saved file itself will only store the Group name that was linked, so on a next file read, the Group Objects will be re-read as stored (changed) in the Library file. (Note; current implementation also "gives a base" to linked Group Objects, to show them as Objects in the current Scene. Need that now for testing purposes, but probably will be removed later). -> Outliner Outliner now shows Groups as optio too, nice to organize your data a bit too! In General, Groups have a very good potential... for example, it could become default for MetaBall Objects too (jiri, I can help you later on how this works). All current 'layer relationships' in Blender should be dropped in time, I guess...
2005-12-06 10:55:30 +00:00
/* here we go */
nr= pupmenu(str);
MEM_freeN(str);
Added select group meny to mesh editmode. Currently only works for faces. Try Shift+G in face/editmode.
2006-03-25 04:37:40 +00:00
select_object_grouped(nr);
Orange branch: Revived hidden treasure, the Groups! Previous experiment (in 2000) didn't satisfy, it had even some primitive NLA option in groups... so, cleaned up the old code (removed most) and integrated it back in a more useful way. Usage: - CTRL+G gives menu to add group, add to existing group, or remove from groups. - In Object buttons, a new (should become first) Panel was added, showing not only Object "ID button" and Parent, but also the Groups the Object Belongs to. These buttons also allow rename, assigning or removing. - To indicate Objects are grouped, they're drawn in a (not theme yet, so temporal?) green wire color. - Use ALT+SHIFT mouse-select to (de)select an entire group But, the real power of groups is in the following features: -> Particle Force field and Guide control In the "Particle Motion" Panel, you can indicate a Group name, this then limits force fields or guides to members of that Group. (Note that layers still work on top of that... not sure about that). -> Light Groups In the Material "Shaders" Panel, you can indicate a Group name to limit lighting for the Material to lamps in this group. The Lights in a Group do need to be 'visible' for the Scene to be rendered (as usual). -> Group Duplicator In the Object "Anim" Panel, you can set any Object (use Empty!) to duplicate an entire Group. It will make copies of all Objects in that Group. Also works for animated Objects, but it will copy the current positions or deforms. Control over 'local timing' (so we can do Massive anims!) will be added later. (Note; this commit won't render Group duplicators yet, a fix in bf-blender will enable that, next commit will sync) -> Library Appending In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed. By appending or linking the Group itself, and use the Group Duplicator, you now can animate and position linked Objects. The nice thing is that the local saved file itself will only store the Group name that was linked, so on a next file read, the Group Objects will be re-read as stored (changed) in the Library file. (Note; current implementation also "gives a base" to linked Group Objects, to show them as Objects in the current Scene. Need that now for testing purposes, but probably will be removed later). -> Outliner Outliner now shows Groups as optio too, nice to organize your data a bit too! In General, Groups have a very good potential... for example, it could become default for MetaBall Objects too (jiri, I can help you later on how this works). All current 'layer relationships' in Blender should be dropped in time, I guess...
2005-12-06 10:55:30 +00:00
}
Added a python hook to Joining objects Object.Join() Seperated the join calls from space.c and view3dmenu into join_menu() in space.c, like the select_group_menu(), okee's from join_curve, join_mesh.. etc are in join_menu() so python can call them without UI menu's in the way. this is also a bit neater since there were 2 places that were doing what join_menu() does now. - Cam
2005-12-30 14:17:15 +00:00
void join_menu(void)
{
Object *ob= OBACT;
if (ob && !G.obedit) {
if(ob->type == OB_MESH) {
if(okee("Join selected meshes")==0) return;
join_mesh();
} else if(ob->type == OB_CURVE) {
if(okee("Join selected curves")==0) return;
join_curve(OB_CURVE);
} else if(ob->type == OB_SURF) {
if(okee("Join selected NURBS")==0) return;
join_curve(OB_SURF);
} else if(ob->type == OB_ARMATURE) {
/* Make sure the user wants to continue*/
if(okee("Join selected armatures")==0) return;
join_armature ();
}
}
}
Orange branch: Revived hidden treasure, the Groups! Previous experiment (in 2000) didn't satisfy, it had even some primitive NLA option in groups... so, cleaned up the old code (removed most) and integrated it back in a more useful way. Usage: - CTRL+G gives menu to add group, add to existing group, or remove from groups. - In Object buttons, a new (should become first) Panel was added, showing not only Object "ID button" and Parent, but also the Groups the Object Belongs to. These buttons also allow rename, assigning or removing. - To indicate Objects are grouped, they're drawn in a (not theme yet, so temporal?) green wire color. - Use ALT+SHIFT mouse-select to (de)select an entire group But, the real power of groups is in the following features: -> Particle Force field and Guide control In the "Particle Motion" Panel, you can indicate a Group name, this then limits force fields or guides to members of that Group. (Note that layers still work on top of that... not sure about that). -> Light Groups In the Material "Shaders" Panel, you can indicate a Group name to limit lighting for the Material to lamps in this group. The Lights in a Group do need to be 'visible' for the Scene to be rendered (as usual). -> Group Duplicator In the Object "Anim" Panel, you can set any Object (use Empty!) to duplicate an entire Group. It will make copies of all Objects in that Group. Also works for animated Objects, but it will copy the current positions or deforms. Control over 'local timing' (so we can do Massive anims!) will be added later. (Note; this commit won't render Group duplicators yet, a fix in bf-blender will enable that, next commit will sync) -> Library Appending In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed. By appending or linking the Group itself, and use the Group Duplicator, you now can animate and position linked Objects. The nice thing is that the local saved file itself will only store the Group name that was linked, so on a next file read, the Group Objects will be re-read as stored (changed) in the Library file. (Note; current implementation also "gives a base" to linked Group Objects, to show them as Objects in the current Scene. Need that now for testing purposes, but probably will be removed later). -> Outliner Outliner now shows Groups as optio too, nice to organize your data a bit too! In General, Groups have a very good potential... for example, it could become default for MetaBall Objects too (jiri, I can help you later on how this works). All current 'layer relationships' in Blender should be dropped in time, I guess...
2005-12-06 10:55:30 +00:00
Report #1457 The laptop option "no numpad" did this in the main queue, for all windows. This caused problems, like for text editing in 3d window. Now it only does it in 3d window, and not with editmode for Text object.
2004-07-23 21:07:32 +00:00
static unsigned short convert_for_nonumpad(unsigned short event)
{
if (event>=ZEROKEY && event<=NINEKEY) {
return event - ZEROKEY + PAD0;
} else if (event==MINUSKEY) {
return PADMINUS;
} else if (event==EQUALKEY) {
return PADPLUSKEY;
} else if (event==BACKSLASHKEY) {
return PADSLASHKEY;
} else {
return event;
}
}
Bug 1568 Wrong usage of B_NOP code in button events (xxxx | B_NOP), which is useles since it is defined as -1. Reminder for all: use a B_NOP if you want a button event not to be passed on to the event queues.
2004-09-16 17:57:14 +00:00
/* *************** */
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
void BIF_undo_push(char *str)
Bug 1568 Wrong usage of B_NOP code in button events (xxxx | B_NOP), which is useles since it is defined as -1. Reminder for all: use a B_NOP if you want a button event not to be passed on to the event queues.
2004-09-16 17:57:14 +00:00
{
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
if(G.obedit) {
Made it so that number of editmode unsteps can successfully be set to zero.
2005-10-24 20:11:16 +00:00
if (U.undosteps == 0) return;
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
if(G.obedit->type==OB_MESH)
undo_push_mesh(str);
else if ELEM(G.obedit->type, OB_CURVE, OB_SURF)
undo_push_curve(str);
More undo goodies; - Undo for editmode Font object - Undo for posemode :) (btw; it also means posemode remains active on file load)
2004-11-07 20:11:42 +00:00
else if (G.obedit->type==OB_FONT)
undo_push_font(str);
- added support for MetaBall undo in edit mode (Ctrl-Z ... undo) (Ctrl-Y/Ctrl-Shift-Z ... redo)
2004-09-29 22:28:14 +00:00
else if (G.obedit->type==OB_MBALL)
undo_push_mball(str);
Undo for lattice editmode added.
2004-11-07 21:14:21 +00:00
else if (G.obedit->type==OB_LATTICE)
undo_push_lattice(str);
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
else if (G.obedit->type==OB_ARMATURE)
undo_push_armature(str);
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
}
else {
if(U.uiflag & USER_GLOBALUNDO)
BKE_write_undo(str);
}
}
Bug 1568 Wrong usage of B_NOP code in button events (xxxx | B_NOP), which is useles since it is defined as -1. Reminder for all: use a B_NOP if you want a button event not to be passed on to the event queues.
2004-09-16 17:57:14 +00:00
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
void BIF_undo(void)
- basic code for fake-polygon support (called FGon in code). Disabled now - hide flags now save correctly in mesh, to restore after going in/out editmode - after an extrude, faces/edges could have wrong select flags (only in vertex select mode) - new rule for addfacelist(); this now copies edges too, if an example is provided. That prevents a lot of awkward code, still testing if it goes as desired though...
2004-09-24 12:40:37 +00:00
{
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
if(G.obedit) {
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
if ELEM7(G.obedit->type, OB_MESH, OB_FONT, OB_CURVE, OB_SURF, OB_MBALL, OB_LATTICE, OB_ARMATURE)
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
undo_editmode_step(1);
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
}
else {
Added undo in UV FaceSelect mode (3d window) and in UV Image window. Brecht; can you give it a good test :)
2004-11-06 23:22:06 +00:00
if(G.f & G_WEIGHTPAINT)
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
wpaint_undo();
else if(G.f & G_VERTEXPAINT)
vpaint_undo();
Texturepaint now supports all the imagepaint brush settings, with the exception of the clone tool. One level undo for image- and texturepaint, only storing those tiles that changed. Test to improve texturepaint performance using glTexSubImage2D, only enabled with 2^n sized textures and mipmapping off. Painting a 2048x2048 texture is then pretty smooth here, as long as the geometry is not too complex.
2006-08-27 13:29:00 +00:00
else if(G.f & G_TEXTUREPAINT)
imagepaint_undo();
else if(curarea->spacetype==SPACE_IMAGE && (G.sima->flag & SI_DRAWTOOL))
imagepaint_undo();
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
else {
Added undo in UV FaceSelect mode (3d window) and in UV Image window. Brecht; can you give it a good test :)
2004-11-06 23:22:06 +00:00
/* now also in faceselect mode */
Orange; stuff for the animation department! - Found the potential crasher for sound playback & undo. Test! - PoseMode: NKey panel didn't work when actions where assigned - NLA: "Add action strip" now displays in menu to which active object the actions are added.
2006-01-03 12:04:05 +00:00
if(U.uiflag & USER_GLOBALUNDO) {
BKE_undo_step(1);
sound_initialize_sounds();
}
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
}
}
Bug 1568 Wrong usage of B_NOP code in button events (xxxx | B_NOP), which is useles since it is defined as -1. Reminder for all: use a B_NOP if you want a button event not to be passed on to the event queues.
2004-09-16 17:57:14 +00:00
}
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
void BIF_redo(void)
Bug 1568 Wrong usage of B_NOP code in button events (xxxx | B_NOP), which is useles since it is defined as -1. Reminder for all: use a B_NOP if you want a button event not to be passed on to the event queues.
2004-09-16 17:57:14 +00:00
{
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
if(G.obedit) {
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
if ELEM7(G.obedit->type, OB_MESH, OB_FONT, OB_CURVE, OB_SURF, OB_MBALL, OB_LATTICE, OB_ARMATURE)
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
undo_editmode_step(-1);
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
}
else {
Added undo in UV FaceSelect mode (3d window) and in UV Image window. Brecht; can you give it a good test :)
2004-11-06 23:22:06 +00:00
if(G.f & G_WEIGHTPAINT)
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
wpaint_undo();
else if(G.f & G_VERTEXPAINT)
vpaint_undo();
Texturepaint now supports all the imagepaint brush settings, with the exception of the clone tool. One level undo for image- and texturepaint, only storing those tiles that changed. Test to improve texturepaint performance using glTexSubImage2D, only enabled with 2^n sized textures and mipmapping off. Painting a 2048x2048 texture is then pretty smooth here, as long as the geometry is not too complex.
2006-08-27 13:29:00 +00:00
else if(G.f & G_TEXTUREPAINT)
imagepaint_undo();
else if(curarea->spacetype==SPACE_IMAGE && (G.sima->flag & SI_DRAWTOOL))
imagepaint_undo();
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
else {
Added undo in UV FaceSelect mode (3d window) and in UV Image window. Brecht; can you give it a good test :)
2004-11-06 23:22:06 +00:00
/* includes faceselect now */
Orange; stuff for the animation department! - Found the potential crasher for sound playback & undo. Test! - PoseMode: NKey panel didn't work when actions where assigned - NLA: "Add action strip" now displays in menu to which active object the actions are added.
2006-01-03 12:04:05 +00:00
if(U.uiflag & USER_GLOBALUNDO) {
BKE_undo_step(-1);
sound_initialize_sounds();
}
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
}
}
Bug 1568 Wrong usage of B_NOP code in button events (xxxx | B_NOP), which is useles since it is defined as -1. Reminder for all: use a B_NOP if you want a button event not to be passed on to the event queues.
2004-09-16 17:57:14 +00:00
}
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
void BIF_undo_menu(void)
Bug 1568 Wrong usage of B_NOP code in button events (xxxx | B_NOP), which is useles since it is defined as -1. Reminder for all: use a B_NOP if you want a button event not to be passed on to the event queues.
2004-09-16 17:57:14 +00:00
{
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
if(G.obedit) {
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
if ELEM7(G.obedit->type, OB_MESH, OB_FONT, OB_CURVE, OB_SURF, OB_MBALL, OB_LATTICE, OB_ARMATURE)
- added support for MetaBall undo in edit mode (Ctrl-Z ... undo) (Ctrl-Y/Ctrl-Shift-Z ... redo)
2004-09-29 22:28:14 +00:00
undo_editmode_menu();
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
allqueue(REDRAWALL, 0);
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
}
else {
Added undo in UV FaceSelect mode (3d window) and in UV Image window. Brecht; can you give it a good test :)
2004-11-06 23:22:06 +00:00
if(G.f & G_WEIGHTPAINT)
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
;
else if(G.f & G_VERTEXPAINT)
;
else {
Lotsa undo stuff added; - ALT+U undo menu shows history for global undo as well - Added undo pushes for buttons window more consistantly - Added it & tested for ipowindow too - Added it in outliner - And quite some missing occasions for 3d window editing
2004-11-07 16:49:46 +00:00
if(U.uiflag & USER_GLOBALUNDO) {
char *menu= BKE_undo_menu_string();
if(menu) {
short event= pupmenu_col(menu, 20);
MEM_freeN(menu);
if(event>0) BKE_undo_number(event);
}
}
Another step in the undo evolution. - Made unified API for undo calls, to be found in space.c BIF_undo_push(char *str) BIF_undo(void) BIF_redo(void) These calls will do all undo levels, including editmode and vpaint. The transition is work in progress, because mesh undo needs recode. - New global hotkey CTR+Z for undo Note: 'shaded draw mode' still is SHIFT+Z, the old CTRL+Z was to recalc the lighting in shaded mode, which already became much more interactive, like during/after any transform(). Recalc hotkey now is SHIFT+ALT+Z CTRL+<any modifier>+Z is redo. - For OSX users; the Apple-key ("Command") now maps to CTRL as well. This disables the one-mouse-button hack for rightmouse btw, will be fixed in next commit. At least we can use Apple-Z :) - Old Ukey for undo is still there, as a training period... my preference is to restore Ukey to "reload original data" as in past, and only use new CTRL+Z for undo. - Added undo_push() for all of editobject.c and editview.c. Meaning we can start using/testing global undo in the 3d window. Please dont comment on missing parts for now, first I want someone to volunteer to tackle all of that. - Since the global undo has a full 'file' in memory, it can save extremely fast on exit to <temp dir>/quit.blend. That's default now when global undo is enabled. It prints "Saved session recovery to ..." in console then. - In file menu, a new option is added "Recover Last Session". Note that this reads the undo-save, which is without UI. - With such nice new features we then can also kill the disputed Cancel/Confirm menu on Q-KEY. - Added fix which initializes seam/normal theme color on saved themes. They showed black now.... (Note: that's in usiblender.c!)
2004-09-18 12:12:45 +00:00
}
}
Bug 1568 Wrong usage of B_NOP code in button events (xxxx | B_NOP), which is useles since it is defined as -1. Reminder for all: use a B_NOP if you want a button event not to be passed on to the event queues.
2004-09-16 17:57:14 +00:00
}
/* *************** */
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void winqreadview3dspace(ScrArea *sa, void *spacedata, BWinEvent *evt)
Initial revision
2002-10-12 11:37:38 +00:00
{
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
View3D *v3d= sa->spacedata.first;
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
Object *ob= OBACT; /* do not change! */
Initial revision
2002-10-12 11:37:38 +00:00
float *curs;
int doredraw= 0, pupval;
Image Paint: - Code for brush spacing and timing was rewritten, making spacing more even. Example: http://users.pandora.be/blendix/brush_spacing.jpg - Instead of Stepsize for regular brushes and Flow for airbrushes, there is now Spacing for both, and Rate for airbrushes. - Airbrush now works more like it does in the Gimp now, by maintaining the spacing even if the brush moves faster than the painting rate. - Some preparations to make brushes work in texture paint mode.
2006-07-28 00:56:35 +00:00
unsigned short event= evt->event, origevent= evt->event;
Killed silly modal PoseMode mode! :) - PoseMode now is a state Armature Objects can be in. So, while in PoseMode for an Armature, you can just select another Object or Armature. - The old PoseMode options (transform, insert keys etc) are accessible with making the Armature Object 'active' (and have object in PoseMode). - At this moment no multiple Poses can be transformed/edited at the same time. - The old hotkey CTRL+TAB, and view3d header menu, still work to set an Object's PoseMode It was quite a lot recode, so tests & reports are welcome. Oh, as a bonus I added Lasso Select for Bones in PoseMode! It selects using only the line between root and tip of the Bone.
2005-07-23 18:52:31 +00:00
short val= evt->val;
char ascii= evt->ascii;
Initial revision
2002-10-12 11:37:38 +00:00
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
if(curarea->win==0) return; /* when it comes from sa->headqread() */
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
if(val) {
if( uiDoBlocks(&curarea->uiblocks, event)!=UI_NOTHING ) event= 0;
Three functionalities in one commit, but there's overlap so I can't separate it... 1) Curve/Surface editmode undo Uses same syntax as mesh undo, so simple to integrate. Edit-curve data is also quite simpler, so no need for any hack at all. It re-uses the undo system from next point, which is nice short & clean local code 2) Framework for global undo The undo calls themselves are commented out. In a next commit I want to enable it for a couple of main features, for further feedback. The speed goes surprisingly well, especially with this new version that 'pushes' undo after a command, ensuring interactivity isnt frustrated 3) framework for texture based icons in Blender Not activated code, but tested here. Part of 2.3 UI project. btw: Johnny Matthews will assist in (and complete) the undo project
2004-08-31 13:43:18 +00:00
if(event==MOUSEY || event==MOUSEX) return;
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
if(event==UI_BUT_EVENT) do_butspace(val); /* temporal, view3d deserves own queue? */
- expanded internal windowmanager that it allows button panels in any window (type) - each SpaceData struct (not the window!) can get 'block handlers' assigned, basically event codes that invoke drawing button panels. - this is saved in files, and Panels behave in any window like it does now in buttonswindow - it also means that a 'space window' should leave with a matrix set for buttons level - try it in view3d header menu, 'view'->'backdrop'. this opens the old viewbuttons - it all works non blocking! instant updates of viewbuttons visible in 3d window now. Not done yet: - checking and fixing frontbuffer drawing (select a wireframe draws over) - temporally vertices cannot be selected, is my next project - closing or hiding Panels... - styling stuff... i committed for others to review as well. Have fun. this is certainly a huge improvement over the old viewbuttons!
2003-10-15 12:26:26 +00:00
BPython: - Made Blender.event var (previously only used by script links) hold ascii value -- where it applies -- of current event during events callback registered with Draw.Register(gui, events, button_events). Useful for gui scripts like Campbell's Python console. No problem using this var to hold the value, since in gui scripts it was not used (always None). - Updated Window and Window.Theme with new theme vars and the Time space. - Script links: -- Added "Render" event for script links (runs twice, second time as "PostEvent", for clean-up actions). Now FrameChanged links don't run when a single pic is rendered. -- Added "Enable Script Links" button in the script buttons tab. Now this bit gets saved in .blends along with the rest of G.f, so users can define per .blend if they are on or off by default. "blender -y" also disables all slinks as happened before with OnLoad ones only. -- Other small changes in the script buttons tab: When a link is added (button "new"), it becomes the active one for the window, no need to press a button to reach it. Also, a pupmenu showing all available texts is shown when "new" is pressed, so users can choose a text w/o having to type. Cancel the popup to leave the string button empty (link exists, but has no script assigned). A pulldown would be better UI-wise, but it's kinda weird to show both scripts and normal texts (Blender doesn't differentiate them) in a script links pulldown. With a popup we can show only texts ending in ".py" (not done in this commit, need opinions) and if the script has no or another extension, case of many in old and current .blend's, there's still the string box for writing its name. -- Implemented Ton's space handler script links: Right now only for the 3d View, but it's trivial to add for others. There are two types: EVENT, to receive 3d View events from a chosen window and DRAW, to draw on the window. Ton's idea was to give scripts a controlled way to integrate better within Blender. Here's how it works: - scripts must have a proper header, like: # SPACEHANDLER.VIEW3D.EVENT and then they are shown in 3d View's View menu, "Space Handler Scripts" submenu. Check (mark, click on it) a script to make it active. EVENT handlers should consult the Blender.event var to get the current event, which can be compared with values from the Draw module: import Blender from Blender import Draw evt = Blender.event if evt == Draw.AKEY: print "a" elif evt == Draw.LEFTMOUSE: print "left mouse button" else: return # ignore, pass event back to Blender Blender.event = None # tell Blender not to process itself the event DRAW handlers are free to draw to their owner 3D View. OpenGL attributes and modelview and projection matrices are pushed before running the handler and poped when it finishes. To communicate between EVENT and DRAW handler scripts we have the Blender.Registry module, as always. Still need to code some nice example, which should also serve to test properly space handlers. Simple tests went fine. - doc updates about the additions. ======= Note: the UI part of the space handlers and script links is of course open for changes, I just tried to make it understandable. Probably we won't use the scriptlinks icon for "None Available" (check 3d View -> View -> Space Handler Scripts), though it hints at what space handlers are. The tooltips may not be accepted either, since other menus don't use them. Opinions welcomed.
2005-05-08 21:20:34 +00:00
/* we consider manipulator a button, defaulting to leftmouse */
So! Finally a show-off of the *power* of Martin P's work! :) - Made framework for 3d Transform Manipulators (widgets) - The Manipulators act like '2d buttons', by default with LeftMouse and with while-hold-move-release - Implemented now: Translation Widget, which allows: - four hotspots for axis grab or view-aligned grab - center defined by 'around' setting - SHIFT+LMB gives planar constraint on other 2 axes - works in Object mode and Edit mode (not posemode yet) Enable it with (temporal) icon in 3D header. All other 'normal' transforms then keeps working btw. On the todo for this widget: - choice for Global, Local or Normal orientation The way the widgets are going to work is in review still. Commit is also for Matt for his proposal/paper on topic. Some notes regarding this project; - no life updates (on mouse over) like 3DS, I think that's neurotic - on click, dominant axis changes to theme defined "Transform" color, other axes disappear, like maya - manipulater size is fixed preset, independent zoom. - manipulator follows selection, and is located based on 'around' mode Unresolved; - in maya, when you select 2 or more objects, the manipulator draws on the 'active' object, also interesting - what to do with G,R,S hotkeys? It could switch the manipulator "mode"... - header button/menu for manipulator mode?
2005-03-17 21:31:49 +00:00
if(event==LEFTMOUSE) if(BIF_do_manipulator(sa)) return;
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
/* swap mouse buttons based on user preference */
if (U.flag & USER_LMOUSESELECT) {
Bug fix #1893 Option to switch left/right mouse didn't work for floating panels. It then still selected stuff behind the button. Was due to using wrong variable for events.
2004-11-26 20:20:42 +00:00
if (event==LEFTMOUSE) event = RIGHTMOUSE;
else if (event==RIGHTMOUSE) event = LEFTMOUSE;
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
}
BPython: - Made Blender.event var (previously only used by script links) hold ascii value -- where it applies -- of current event during events callback registered with Draw.Register(gui, events, button_events). Useful for gui scripts like Campbell's Python console. No problem using this var to hold the value, since in gui scripts it was not used (always None). - Updated Window and Window.Theme with new theme vars and the Time space. - Script links: -- Added "Render" event for script links (runs twice, second time as "PostEvent", for clean-up actions). Now FrameChanged links don't run when a single pic is rendered. -- Added "Enable Script Links" button in the script buttons tab. Now this bit gets saved in .blends along with the rest of G.f, so users can define per .blend if they are on or off by default. "blender -y" also disables all slinks as happened before with OnLoad ones only. -- Other small changes in the script buttons tab: When a link is added (button "new"), it becomes the active one for the window, no need to press a button to reach it. Also, a pupmenu showing all available texts is shown when "new" is pressed, so users can choose a text w/o having to type. Cancel the popup to leave the string button empty (link exists, but has no script assigned). A pulldown would be better UI-wise, but it's kinda weird to show both scripts and normal texts (Blender doesn't differentiate them) in a script links pulldown. With a popup we can show only texts ending in ".py" (not done in this commit, need opinions) and if the script has no or another extension, case of many in old and current .blend's, there's still the string box for writing its name. -- Implemented Ton's space handler script links: Right now only for the 3d View, but it's trivial to add for others. There are two types: EVENT, to receive 3d View events from a chosen window and DRAW, to draw on the window. Ton's idea was to give scripts a controlled way to integrate better within Blender. Here's how it works: - scripts must have a proper header, like: # SPACEHANDLER.VIEW3D.EVENT and then they are shown in 3d View's View menu, "Space Handler Scripts" submenu. Check (mark, click on it) a script to make it active. EVENT handlers should consult the Blender.event var to get the current event, which can be compared with values from the Draw module: import Blender from Blender import Draw evt = Blender.event if evt == Draw.AKEY: print "a" elif evt == Draw.LEFTMOUSE: print "left mouse button" else: return # ignore, pass event back to Blender Blender.event = None # tell Blender not to process itself the event DRAW handlers are free to draw to their owner 3D View. OpenGL attributes and modelview and projection matrices are pushed before running the handler and poped when it finishes. To communicate between EVENT and DRAW handler scripts we have the Blender.Registry module, as always. Still need to code some nice example, which should also serve to test properly space handlers. Simple tests went fine. - doc updates about the additions. ======= Note: the UI part of the space handlers and script links is of course open for changes, I just tried to make it understandable. Probably we won't use the scriptlinks icon for "None Available" (check 3d View -> View -> Space Handler Scripts), though it hints at what space handlers are. The tooltips may not be accepted either, since other menus don't use them. Opinions welcomed.
2005-05-08 21:20:34 +00:00
/* run any view3d event handler script links */
if (event && sa->scriptlink.totscript)
if (BPY_do_spacehandlers(sa, event, SPACEHANDLER_VIEW3D_EVENT))
return; /* return if event was processed (swallowed) by handler(s) */
Initial revision
2002-10-12 11:37:38 +00:00
/* TEXTEDITING?? */
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.obedit) && G.obedit->type==OB_FONT) {
Initial revision
2002-10-12 11:37:38 +00:00
switch(event) {
case LEFTMOUSE:
mouse_cursor();
break;
case MIDDLEMOUSE:
-fixed bug; ALT+LeftMouse emulates MiddleMouse again.
2003-11-06 15:28:40 +00:00
/* use '&' here, because of alt+leftmouse which emulates middlemouse */
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
if(U.flag & USER_VIEWMOVE) {
if((G.qual==LR_SHIFTKEY) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==(LR_ALTKEY|LR_SHIFTKEY))))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(0);
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
else if((G.qual==LR_CTRLKEY) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==(LR_ALTKEY|LR_CTRLKEY))))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(2);
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
else if((G.qual==0) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==LR_ALTKEY)))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(1);
Initial revision
2002-10-12 11:37:38 +00:00
}
else {
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
if((G.qual==LR_SHIFTKEY) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==(LR_ALTKEY|LR_SHIFTKEY))))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(1);
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
else if((G.qual==LR_CTRLKEY) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==(LR_ALTKEY|LR_CTRLKEY))))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(2);
-fixed bug; ALT+LeftMouse emulates MiddleMouse again.
2003-11-06 15:28:40 +00:00
else
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(0);
Initial revision
2002-10-12 11:37:38 +00:00
}
- missing break statement caused middle mouse click to zoom one step, only in text editmode
2003-10-29 22:53:09 +00:00
break;
enabled mousewheel functionality also in 3D textediting.
2003-06-10 21:07:56 +00:00
case WHEELUPMOUSE:
/* Regular: Zoom in */
/* Shift: Scroll up */
/* Ctrl: Scroll right */
/* Alt-Shift: Rotate up */
/* Alt-Ctrl: Rotate right */
if( G.qual & LR_SHIFTKEY ) {
if( G.qual & LR_ALTKEY ) {
G.qual &= ~LR_SHIFTKEY;
persptoetsen(PAD2);
G.qual |= LR_SHIFTKEY;
} else {
persptoetsen(PAD2);
}
} else if( G.qual & LR_CTRLKEY ) {
if( G.qual & LR_ALTKEY ) {
G.qual &= ~LR_CTRLKEY;
persptoetsen(PAD4);
G.qual |= LR_CTRLKEY;
} else {
persptoetsen(PAD4);
}
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
} else if(U.uiflag & USER_WHEELZOOMDIR)
enabled mousewheel functionality also in 3D textediting.
2003-06-10 21:07:56 +00:00
persptoetsen(PADMINUS);
else
persptoetsen(PADPLUSKEY);
doredraw= 1;
break;
case WHEELDOWNMOUSE:
/* Regular: Zoom out */
/* Shift: Scroll down */
/* Ctrl: Scroll left */
/* Alt-Shift: Rotate down */
/* Alt-Ctrl: Rotate left */
if( G.qual & LR_SHIFTKEY ) {
if( G.qual & LR_ALTKEY ) {
G.qual &= ~LR_SHIFTKEY;
persptoetsen(PAD8);
G.qual |= LR_SHIFTKEY;
} else {
persptoetsen(PAD8);
}
} else if( G.qual & LR_CTRLKEY ) {
if( G.qual & LR_ALTKEY ) {
G.qual &= ~LR_CTRLKEY;
persptoetsen(PAD6);
G.qual |= LR_CTRLKEY;
} else {
persptoetsen(PAD6);
}
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
} else if(U.uiflag & USER_WHEELZOOMDIR)
enabled mousewheel functionality also in 3D textediting.
2003-06-10 21:07:56 +00:00
persptoetsen(PADPLUSKEY);
else
persptoetsen(PADMINUS);
doredraw= 1;
break;
Initial revision
2002-10-12 11:37:38 +00:00
case UKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_ALTKEY) {
Initial revision
2002-10-12 11:37:38 +00:00
remake_editText();
doredraw= 1;
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
else {
Initial revision
2002-10-12 11:37:38 +00:00
do_textedit(event, val, ascii);
}
break;
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
case VKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_ALTKEY) {
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
paste_editText();
doredraw= 1;
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
else {
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
do_textedit(event, val, ascii);
}
break;
Initial revision
2002-10-12 11:37:38 +00:00
case PAD0: case PAD1: case PAD2: case PAD3: case PAD4:
case PAD5: case PAD6: case PAD7: case PAD8: case PAD9:
case PADENTER:
persptoetsen(event);
doredraw= 1;
break;
default:
do_textedit(event, val, ascii);
break;
}
}
else {
Report #1457 The laptop option "no numpad" did this in the main queue, for all windows. This caused problems, like for text editing in 3d window. Now it only does it in 3d window, and not with editmode for Text object.
2004-07-23 21:07:32 +00:00
if (U.flag & USER_NONUMPAD) {
event= convert_for_nonumpad(event);
}
Initial revision
2002-10-12 11:37:38 +00:00
switch(event) {
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* Afterqueue events */
Initial revision
2002-10-12 11:37:38 +00:00
case BACKBUFDRAW:
backdrawview3d(1);
break;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
case RENDERPREVIEW:
BIF_view3d_previewrender(sa);
break;
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
/* LEFTMOUSE and RIGHTMOUSE event codes can be swapped above,
* based on user preference USER_LMOUSESELECT
*/
case LEFTMOUSE:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if ((G.obedit) || !(G.f&(G_VERTEXPAINT|G_WEIGHTPAINT|G_TEXTUREPAINT))) {
Initial revision
2002-10-12 11:37:38 +00:00
mouse_cursor();
}
else if (G.f & G_WEIGHTPAINT){
weight_paint();
}
Fix for bug #4461: - In weight paint mode, with the vertex paint flag also set, vertex paint would get the mouse events instead of weight paint.
2006-06-25 09:40:01 +00:00
else if (G.f & G_VERTEXPAINT) {
vertex_paint();
}
Initial revision
2002-10-12 11:37:38 +00:00
else if (G.f & G_TEXTUREPAINT) {
Texturepaint now supports all the imagepaint brush settings, with the exception of the clone tool. One level undo for image- and texturepaint, only storing those tiles that changed. Test to improve texturepaint performance using glTexSubImage2D, only enabled with 2^n sized textures and mipmapping off. Painting a 2048x2048 texture is then pretty smooth here, as long as the geometry is not too complex.
2006-08-27 13:29:00 +00:00
imagepaint_paint(origevent==LEFTMOUSE? L_MOUSE: R_MOUSE, 1);
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case MIDDLEMOUSE:
-fixed bug; ALT+LeftMouse emulates MiddleMouse again.
2003-11-06 15:28:40 +00:00
/* use '&' here, because of alt+leftmouse which emulates middlemouse */
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
if(U.flag & USER_VIEWMOVE) {
if((G.qual==LR_SHIFTKEY) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==(LR_ALTKEY|LR_SHIFTKEY))))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(0);
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
else if((G.qual==LR_CTRLKEY) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==(LR_ALTKEY|LR_CTRLKEY))))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(2);
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
else if((G.qual==0) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==LR_ALTKEY)))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(1);
Initial revision
2002-10-12 11:37:38 +00:00
}
else {
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
if((G.qual==LR_SHIFTKEY) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==(LR_ALTKEY|LR_SHIFTKEY))))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(1);
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
else if((G.qual==LR_CTRLKEY) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==(LR_ALTKEY|LR_CTRLKEY))))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(2);
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
else if((G.qual==0) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==LR_ALTKEY)))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
viewmove(0);
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case RIGHTMOUSE:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.obedit) && (G.qual & LR_CTRLKEY)==0) {
if(G.obedit->type==OB_MESH)
mouse_mesh();
else if ELEM(G.obedit->type, OB_CURVE, OB_SURF)
mouse_nurb();
else if(G.obedit->type==OB_MBALL)
mouse_mball();
else if(G.obedit->type==OB_LATTICE)
mouse_lattice();
else if(G.obedit->type==OB_ARMATURE)
mouse_armature();
}
Bugfix #3210 Included a patch by Pablo Marrol! selecting with ALT+CTRL combos didnt check if there was actually a Mesh in editmode.
2005-10-24 19:22:04 +00:00
else if((G.obedit && G.obedit->type==OB_MESH) && (G.qual == (LR_CTRLKEY|LR_ALTKEY)))
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
mouse_mesh(); /* loop select for 1 mousebutton dudes */
Bugfix #3210 Included a patch by Pablo Marrol! selecting with ALT+CTRL combos didnt check if there was actually a Mesh in editmode.
2005-10-24 19:22:04 +00:00
else if((G.obedit && G.obedit->type==OB_MESH) && (G.qual == (LR_CTRLKEY|LR_ALTKEY|LR_SHIFTKEY)))
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
mouse_mesh(); /* loop select for 1 mousebutton dudes */
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_CTRLKEY)
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
mouse_select(); /* also allow in editmode, for vertex parenting */
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.f & G_FACESELECT)
face_select();
else if( G.f & (G_VERTEXPAINT|G_TEXTUREPAINT))
sample_vpaint();
Initial revision
2002-10-12 11:37:38 +00:00
else
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
mouse_select(); /* does poses too */
Initial revision
2002-10-12 11:37:38 +00:00
break;
added mousewheel support part 2
2003-01-28 11:14:38 +00:00
case WHEELUPMOUSE:
/* Regular: Zoom in */
/* Shift: Scroll up */
/* Ctrl: Scroll right */
/* Alt-Shift: Rotate up */
/* Alt-Ctrl: Rotate right */
if( G.qual & LR_SHIFTKEY ) {
if( G.qual & LR_ALTKEY ) {
G.qual &= ~LR_SHIFTKEY;
persptoetsen(PAD2);
G.qual |= LR_SHIFTKEY;
} else {
persptoetsen(PAD2);
}
} else if( G.qual & LR_CTRLKEY ) {
if( G.qual & LR_ALTKEY ) {
G.qual &= ~LR_CTRLKEY;
persptoetsen(PAD4);
G.qual |= LR_CTRLKEY;
} else {
persptoetsen(PAD4);
}
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
} else if(U.uiflag & USER_WHEELZOOMDIR)
added mousewheel support part 2
2003-01-28 11:14:38 +00:00
persptoetsen(PADMINUS);
else
persptoetsen(PADPLUSKEY);
doredraw= 1;
break;
case WHEELDOWNMOUSE:
/* Regular: Zoom out */
/* Shift: Scroll down */
/* Ctrl: Scroll left */
/* Alt-Shift: Rotate down */
/* Alt-Ctrl: Rotate left */
if( G.qual & LR_SHIFTKEY ) {
if( G.qual & LR_ALTKEY ) {
G.qual &= ~LR_SHIFTKEY;
persptoetsen(PAD8);
G.qual |= LR_SHIFTKEY;
} else {
persptoetsen(PAD8);
}
} else if( G.qual & LR_CTRLKEY ) {
if( G.qual & LR_ALTKEY ) {
G.qual &= ~LR_CTRLKEY;
persptoetsen(PAD6);
G.qual |= LR_CTRLKEY;
} else {
persptoetsen(PAD6);
}
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
} else if(U.uiflag & USER_WHEELZOOMDIR)
added mousewheel support part 2
2003-01-28 11:14:38 +00:00
persptoetsen(PADPLUSKEY);
else
persptoetsen(PADMINUS);
doredraw= 1;
break;
Initial revision
2002-10-12 11:37:38 +00:00
case ONEKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY) {
- ARGH! breaking the cvs tag for 2.31... but this a true crash which should have been fixed now we know it. pressing CTRL+1,2,3,4 was meant to set subdivision levels, but it read the active pointer without it checking for NULL... tsk!
2003-11-28 20:45:11 +00:00
if(ob && ob->type == OB_MESH) {
hotkey for changing a mesh to a subsurface and back again: shift+o hotkey for changing display resolution for subdiv: ctrl+1 or 2 or 3 or 4 written by Green
2003-05-07 19:27:29 +00:00
flip_subdivison(ob, 1);
}
}
- ARGH! breaking the cvs tag for 2.31... but this a true crash which should have been fixed now we know it. pressing CTRL+1,2,3,4 was meant to set subdivision levels, but it read the active pointer without it checking for NULL... tsk!
2003-11-28 20:45:11 +00:00
else do_layer_buttons(0);
break;
Initial revision
2002-10-12 11:37:38 +00:00
case TWOKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY) {
- ARGH! breaking the cvs tag for 2.31... but this a true crash which should have been fixed now we know it. pressing CTRL+1,2,3,4 was meant to set subdivision levels, but it read the active pointer without it checking for NULL... tsk!
2003-11-28 20:45:11 +00:00
if(ob && ob->type == OB_MESH) {
hotkey for changing a mesh to a subsurface and back again: shift+o hotkey for changing display resolution for subdiv: ctrl+1 or 2 or 3 or 4 written by Green
2003-05-07 19:27:29 +00:00
flip_subdivison(ob, 2);
}
}
- ARGH! breaking the cvs tag for 2.31... but this a true crash which should have been fixed now we know it. pressing CTRL+1,2,3,4 was meant to set subdivision levels, but it read the active pointer without it checking for NULL... tsk!
2003-11-28 20:45:11 +00:00
else do_layer_buttons(1);
hotkey for changing a mesh to a subsurface and back again: shift+o hotkey for changing display resolution for subdiv: ctrl+1 or 2 or 3 or 4 written by Green
2003-05-07 19:27:29 +00:00
break;
- ARGH! breaking the cvs tag for 2.31... but this a true crash which should have been fixed now we know it. pressing CTRL+1,2,3,4 was meant to set subdivision levels, but it read the active pointer without it checking for NULL... tsk!
2003-11-28 20:45:11 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
case THREEKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY) {
- ARGH! breaking the cvs tag for 2.31... but this a true crash which should have been fixed now we know it. pressing CTRL+1,2,3,4 was meant to set subdivision levels, but it read the active pointer without it checking for NULL... tsk!
2003-11-28 20:45:11 +00:00
if(ob && ob->type == OB_MESH) {
hotkey for changing a mesh to a subsurface and back again: shift+o hotkey for changing display resolution for subdiv: ctrl+1 or 2 or 3 or 4 written by Green
2003-05-07 19:27:29 +00:00
flip_subdivison(ob, 3);
}
}
For lukep: In face select mode, select faces by triangle/quad/other. Available through header menu, toolbox, or hot keys. Hot keys are: ctrl-shift-alt-3: Select all triangles ctrl-shift-alt-4: Select all quads ctrl-shift-alt-5: Select all non-triangles/quads (maybe a bit sore for the wrist) And also available through the menu/toolbox. I've never used f-gons so I don't know if the 'select other' function works there (or works at all, for that matter).
2005-08-16 22:11:40 +00:00
else if ( G.qual == (LR_SHIFTKEY | LR_ALTKEY | LR_CTRLKEY) ) {
if ( (G.obedit) && (G.obedit->type==OB_MESH) )
select_faces_by_numverts(3);
}
- ARGH! breaking the cvs tag for 2.31... but this a true crash which should have been fixed now we know it. pressing CTRL+1,2,3,4 was meant to set subdivision levels, but it read the active pointer without it checking for NULL... tsk!
2003-11-28 20:45:11 +00:00
else do_layer_buttons(2);
break;
Initial revision
2002-10-12 11:37:38 +00:00
case FOURKEY:
- ARGH! breaking the cvs tag for 2.31... but this a true crash which should have been fixed now we know it. pressing CTRL+1,2,3,4 was meant to set subdivision levels, but it read the active pointer without it checking for NULL... tsk!
2003-11-28 20:45:11 +00:00
if(G.qual==LR_CTRLKEY) {
if(ob && ob->type == OB_MESH) {
hotkey for changing a mesh to a subsurface and back again: shift+o hotkey for changing display resolution for subdiv: ctrl+1 or 2 or 3 or 4 written by Green
2003-05-07 19:27:29 +00:00
flip_subdivison(ob, 4);
}
}
For lukep: In face select mode, select faces by triangle/quad/other. Available through header menu, toolbox, or hot keys. Hot keys are: ctrl-shift-alt-3: Select all triangles ctrl-shift-alt-4: Select all quads ctrl-shift-alt-5: Select all non-triangles/quads (maybe a bit sore for the wrist) And also available through the menu/toolbox. I've never used f-gons so I don't know if the 'select other' function works there (or works at all, for that matter).
2005-08-16 22:11:40 +00:00
else if ( G.qual == (LR_SHIFTKEY | LR_ALTKEY | LR_CTRLKEY) ) {
if ( (G.obedit) && (G.obedit->type==OB_MESH) )
select_faces_by_numverts(4);
}
- ARGH! breaking the cvs tag for 2.31... but this a true crash which should have been fixed now we know it. pressing CTRL+1,2,3,4 was meant to set subdivision levels, but it read the active pointer without it checking for NULL... tsk!
2003-11-28 20:45:11 +00:00
else do_layer_buttons(3);
break;
Initial revision
2002-10-12 11:37:38 +00:00
case FIVEKEY:
For lukep: In face select mode, select faces by triangle/quad/other. Available through header menu, toolbox, or hot keys. Hot keys are: ctrl-shift-alt-3: Select all triangles ctrl-shift-alt-4: Select all quads ctrl-shift-alt-5: Select all non-triangles/quads (maybe a bit sore for the wrist) And also available through the menu/toolbox. I've never used f-gons so I don't know if the 'select other' function works there (or works at all, for that matter).
2005-08-16 22:11:40 +00:00
if ( G.qual == (LR_SHIFTKEY | LR_ALTKEY | LR_CTRLKEY) ) {
if ( (G.obedit) && (G.obedit->type==OB_MESH) )
select_faces_by_numverts(5);
}
else do_layer_buttons(4);
break;
Initial revision
2002-10-12 11:37:38 +00:00
case SIXKEY:
do_layer_buttons(5); break;
case SEVENKEY:
do_layer_buttons(6); break;
case EIGHTKEY:
do_layer_buttons(7); break;
case NINEKEY:
do_layer_buttons(8); break;
case ZEROKEY:
do_layer_buttons(9); break;
case MINUSKEY:
do_layer_buttons(10); break;
case EQUALKEY:
do_layer_buttons(11); break;
case ACCENTGRAVEKEY:
do_layer_buttons(-1); break;
Transform goodies; - Added icons for the Widgets to blenderbuttons pic - Added in header - if widget in use - three buttons to choose widget type (hold shift for combo widgets) - Hotkey CTRL+space now switches widgets on/off I also noticed negative scaling doesn't work satisfying yet; - for scale widget, using center didn't work correct anymore (fixed) - negative scaling didn't even get applied! (fixed) - but; scaling somethig negative now flips back to positive... ???? Last one i need Martin P for! Note that I had to change Mat3ToSize....
2005-03-27 18:17:48 +00:00
case SPACEKEY:
Reflecting the discussions on Transform Manipulators... Here you can see the notes and pictures: http://www.blender3d.org/cms/Manipulator_Widgets.548.0.html The alternative rotate widgets are still under rt=2 and rt=3. Still enough work todo here, but hope it's a good step forward!
2005-04-24 13:22:24 +00:00
if(G.qual == LR_CTRLKEY) {
val= pupmenu("Manipulator%t|Enable/Disable|Translate|Rotate|Scale|Combo");
if(val>0) {
if(val==1) v3d->twflag ^= V3D_USE_MANIPULATOR;
else {
if(val==2) v3d->twtype= V3D_MANIP_TRANSLATE;
else if(val==3) v3d->twtype= V3D_MANIP_ROTATE;
else if(val==4) v3d->twtype= V3D_MANIP_SCALE;
else if(val==5) v3d->twtype= V3D_MANIP_TRANSLATE|V3D_MANIP_ROTATE|V3D_MANIP_SCALE;
v3d->twflag |= V3D_USE_MANIPULATOR;
}
doredraw= 1;
}
}
else if(G.qual == LR_ALTKEY) {
Big Transform Manipulator Merge *NOTE*: Some UI decision done in this commit will most likely be revised, all flame shall go in /dev/null. Constructive discussions of course welcomed. This commit merges manipulator orientation selection back in "traditional" transform. That's how it works: - The dropdown in the 3D view header is always visible - The orientation chosen will be used when choosing an axis with MMB and for the *second* key press of X,Y,Z However, Local orientation doesn't use the one calculated by the manipulator. This is to ensure that multiple object local and armatures in pose still works as before. - Alt-Space (to change the orientation) works during transform New Transform orientation: View, using the view axis. Fixes for the following bugs: - Constraint projection code "jammed" if input vector was <0,0,0>, reported a couple of times on IRC. Thanks to Basse for the example file. - Transform on texspace crashed on objects without texspace data (camera, lamp, ...). This was reported in tracker. - Numinput with lock constraints didn't work correctly. Reported on elysiun Probably some others that I'm forgetting I also moved a couple of functions around in an attempt to make things clearer.
2005-07-24 06:25:00 +00:00
BIF_selectOrientation();
doredraw= 1;
Reflecting the discussions on Transform Manipulators... Here you can see the notes and pictures: http://www.blender3d.org/cms/Manipulator_Widgets.548.0.html The alternative rotate widgets are still under rt=2 and rt=3. Still enough work todo here, but hope it's a good step forward!
2005-04-24 13:22:24 +00:00
}
Transform goodies; - Added icons for the Widgets to blenderbuttons pic - Added in header - if widget in use - three buttons to choose widget type (hold shift for combo widgets) - Hotkey CTRL+space now switches widgets on/off I also noticed negative scaling doesn't work satisfying yet; - for scale widget, using center didn't work correct anymore (fixed) - negative scaling didn't even get applied! (fixed) - but; scaling somethig negative now flips back to positive... ???? Last one i need Martin P for! Note that I had to change Mat3ToSize....
2005-03-27 18:17:48 +00:00
break;
Initial revision
2002-10-12 11:37:38 +00:00
case AKEY:
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
if(G.qual & LR_CTRLKEY) apply_object(); /* also with shift! */
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.qual==LR_SHIFTKEY)) {
- added another load of items to new toolbox... yeez, what an ENORMOUS job Matt has done with the menus! :) - followed as much as possible order and options in pulldowns, but since toolbox has more categories, it is split up sometimes. - did some minor changes in pulldowns to make it more consistant - not yet: armature & text options... - not yet: toolbox in other window types (warning; shift+a now is new... eek!)
2003-10-29 00:23:16 +00:00
toolbox_n_add();
Initial revision
2002-10-12 11:37:38 +00:00
}
else {
if(G.obedit) {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.obedit->type==OB_MESH)
deselectall_mesh();
else if ELEM(G.obedit->type, OB_CURVE, OB_SURF)
deselectall_nurb();
else if(G.obedit->type==OB_MBALL)
deselectall_mball();
else if(G.obedit->type==OB_LATTICE)
deselectall_Latt();
else if(G.obedit->type==OB_ARMATURE)
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
deselectall_armature(1); /* 1 == toggle */
Initial revision
2002-10-12 11:37:38 +00:00
}
Killed silly modal PoseMode mode! :) - PoseMode now is a state Armature Objects can be in. So, while in PoseMode for an Armature, you can just select another Object or Armature. - The old PoseMode options (transform, insert keys etc) are accessible with making the Armature Object 'active' (and have object in PoseMode). - At this moment no multiple Poses can be transformed/edited at the same time. - The old hotkey CTRL+TAB, and view3d header menu, still work to set an Object's PoseMode It was quite a lot recode, so tests & reports are welcome. Oh, as a bonus I added Lasso Select for Bones in PoseMode! It selects using only the line between root and tip of the Bone.
2005-07-23 18:52:31 +00:00
else if (ob && (ob->flag & OB_POSEMODE)){
deselectall_posearmature(ob, 1);
Initial revision
2002-10-12 11:37:38 +00:00
}
else {
if(G.f & G_FACESELECT) deselectall_tface();
It turns out that the "Pressing AKEY to deselect all objects still leaves one object center pink" bug was actually designed by somebody to mark the active object (which need not necessarily be selected). I've added a couple of source comments to explain this so the next person trying to fix this doesn't bother.
2003-02-16 00:12:06 +00:00
else {
/* by design, the center of the active object
* (which need not necessarily by selected) will
* still be drawn as if it were selected.
*/
deselectall();
}
Initial revision
2002-10-12 11:37:38 +00:00
}
}
break;
case BKEY:
New feature; User definable Clipping Planes. Press ALT+B in 3d window, draw a rect, and it becomes a clipping volume of 4 planes. You then can rotate the view anyway you like. Works for each 3d window individually. Disable it with another ALT+B press. Commit is huge because it had to change all selection code as well. The user-clipping planes are in 'eye space', the other clipping happens in projected 'viewport space'. Nice to notice is that the 'x=3200' convention (to denote a coordinate is clipped) now is a define. Define value is still a number though... but we now can get up to screens of 12000 pixels without issues! Known issue; here it refuses to draw the 'object centers' or Lamp icons within the clipping region. Can't find any reason for it... however, we might move to non-pixmaps for it anyway. Testing might reveil numerous issues, will be standby for it. Curious? Check this http://www.blender.org/bf/rt4.jpg
2005-08-20 19:18:35 +00:00
if(G.qual==LR_ALTKEY)
view3d_edit_clipping(v3d);
else if(G.qual==LR_SHIFTKEY)
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
set_render_border();
Baking all selected softbody: press ctrl+b in 3d window!
2006-03-08 17:45:32 +00:00
else if(G.qual==LR_CTRLKEY) {
if(okee("Bake all selected")) {
extern void softbody_bake(Object *ob);
Several minor fixes: - Added part of Austin's msvc8 fixes (vector::erase function was "misused"), hopefully compiles better now. - Ctrl-b now also bakes a selected fluidsim domain similar to the softbodies. - Added surface smoothing option for domains: default is 1, higher values result in a smoother surface (and probably slightly higher comupation times), while 0 means the surface is not modified at all. - Added BLENDER_ELBEEMBOBJABORT environment variable in readBobj, if >0 quits blender when a not yet existing fluidsim frame should be loaded. Useful for rendering simulations as far as possible from the command line. - Surface normals pointer is now set to NULL in readfile.c - Fixed win32 error string handling, now uses a function to return the string from the solver. - Fixed fluidsim particle halo scaling problem. - Solver update
2006-03-29 07:35:54 +00:00
extern void fluidsimBake(Object *ob);
Baking all selected softbody: press ctrl+b in 3d window!
2006-03-08 17:45:32 +00:00
softbody_bake(NULL);
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
/* also bake first domain of selected objects... */
Several minor fixes: - Added part of Austin's msvc8 fixes (vector::erase function was "misused"), hopefully compiles better now. - Ctrl-b now also bakes a selected fluidsim domain similar to the softbodies. - Added surface smoothing option for domains: default is 1, higher values result in a smoother surface (and probably slightly higher comupation times), while 0 means the surface is not modified at all. - Added BLENDER_ELBEEMBOBJABORT environment variable in readBobj, if >0 quits blender when a not yet existing fluidsim frame should be loaded. Useful for rendering simulations as far as possible from the command line. - Surface normals pointer is now set to NULL in readfile.c - Fixed win32 error string handling, now uses a function to return the string from the solver. - Fixed fluidsim particle halo scaling problem. - Solver update
2006-03-29 07:35:54 +00:00
fluidsimBake(NULL);
Baking all selected softbody: press ctrl+b in 3d window!
2006-03-08 17:45:32 +00:00
}
}
New feature; User definable Clipping Planes. Press ALT+B in 3d window, draw a rect, and it becomes a clipping volume of 4 planes. You then can rotate the view anyway you like. Works for each 3d window individually. Disable it with another ALT+B press. Commit is huge because it had to change all selection code as well. The user-clipping planes are in 'eye space', the other clipping happens in projected 'viewport space'. Nice to notice is that the 'x=3200' convention (to denote a coordinate is clipped) now is a define. Define value is still a number though... but we now can get up to screens of 12000 pixels without issues! Known issue; here it refuses to draw the 'object centers' or Lamp icons within the clipping region. Can't find any reason for it... however, we might move to non-pixmaps for it anyway. Testing might reveil numerous issues, will be standby for it. Curious? Check this http://www.blender.org/bf/rt4.jpg
2005-08-20 19:18:35 +00:00
else if(G.qual==0)
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
borderselect();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case CKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY) {
Added PoseMode CTRL+C copy menu. Does loc/rot/size and constraints.
2005-07-26 19:51:15 +00:00
if(ob && (ob->flag & OB_POSEMODE))
pose_copy_menu(); /* poseobject.c */
else
copy_attr_menu();
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_ALTKEY) {
Armature-Pose IK goodies! - Added option to the IK buttons, to have it use the 'tip' as end of the IK chain. I never really understood this old convention (IK didn't work on the Bone itself). Old files still will read OK though. But I made the "To Tip" a default when adding new IK constraints. - Hotkey CTRL+I: add IK, with option to have it adding an Empty target, or use a selected Bone as target. With the new non-modal PoseMode, it gives instant access to playing with the IK chain. - Hotkey ALT+I: clears IK, on all selected Bones - Hotkey ALT+C: clears Constraints on all selected Bones (incl IK)
2005-07-24 11:36:05 +00:00
if(ob && (ob->flag & OB_POSEMODE))
pose_clear_constraints(); /* poseobject.c */
else
convertmenu(); /* editobject.c */
Initial revision
2002-10-12 11:37:38 +00:00
}
New: Hotkey/menu access in 3D window to add constraints. Works in PoseMode as well as for Objects. Hotkey: CTRL+ALT+C (bit clumsy I know, but I like to use the Ckey). Constraints are added to the active Object or Bone. Based on selection context, the menu has three versions: Pose Mode: - if another bone is selected, bone becomes target - else if another Object is selected, Object becomes target - else it adds a new Empty as target Object Mode - if another Object is selected: Object becomes target - else it adds a new Empty as target Same works this way now for CTRL+I, "Add IK". To be solved: ALT+C in PoseMode is "Clear Constraints", but in Object Mode it does "Convert" still...
2005-10-23 12:18:32 +00:00
else if(G.qual==(LR_ALTKEY|LR_CTRLKEY))
add_constraint(0); /* editconstraint.c, generic for objects and posemode */
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.qual==LR_SHIFTKEY)) {
Initial revision
2002-10-12 11:37:38 +00:00
view3d_home(1);
curs= give_cursor();
curs[0]=curs[1]=curs[2]= 0.0;
- fix bug #480 SHIFT+C in 3dWindow didnt update the other 3d windows, when open.
2003-08-17 13:02:17 +00:00
allqueue(REDRAWVIEW3D, 0);
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.obedit) && ELEM(G.obedit->type, OB_CURVE, OB_SURF) ) {
Initial revision
2002-10-12 11:37:38 +00:00
makecyclicNurb();
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
DAG_object_flush_update(G.scene, G.obedit, OB_RECALC_DATA);
Initial revision
2002-10-12 11:37:38 +00:00
allqueue(REDRAWVIEW3D, 0);
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.qual==0)){
CKey centers the camera views camdx/y
2006-08-01 10:54:30 +00:00
if (G.vd->persp==2)
/* center the camera offset */
G.vd->camdx= G.vd->camdy= 0.0;
else {
/*non camera center*/
curs= give_cursor();
G.vd->ofs[0]= -curs[0];
G.vd->ofs[1]= -curs[1];
G.vd->ofs[2]= -curs[2];
}
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_winredraw(curarea);
}
break;
case DKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY)) {
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
duplicate_context_selected();
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_ALTKEY) {
Killed silly modal PoseMode mode! :) - PoseMode now is a state Armature Objects can be in. So, while in PoseMode for an Armature, you can just select another Object or Armature. - The old PoseMode options (transform, insert keys etc) are accessible with making the Armature Object 'active' (and have object in PoseMode). - At this moment no multiple Poses can be transformed/edited at the same time. - The old hotkey CTRL+TAB, and view3d header menu, still work to set an Object's PoseMode It was quite a lot recode, so tests & reports are welcome. Oh, as a bonus I added Lasso Select for Bones in PoseMode! It selects using only the line between root and tip of the Bone.
2005-07-23 18:52:31 +00:00
if(ob && (ob->flag & OB_POSEMODE))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
error ("Duplicate not possible in posemode.");
Killed silly modal PoseMode mode! :) - PoseMode now is a state Armature Objects can be in. So, while in PoseMode for an Armature, you can just select another Object or Armature. - The old PoseMode options (transform, insert keys etc) are accessible with making the Armature Object 'active' (and have object in PoseMode). - At this moment no multiple Poses can be transformed/edited at the same time. - The old hotkey CTRL+TAB, and view3d header menu, still work to set an Object's PoseMode It was quite a lot recode, so tests & reports are welcome. Oh, as a bonus I added Lasso Select for Bones in PoseMode! It selects using only the line between root and tip of the Bone.
2005-07-23 18:52:31 +00:00
else if((G.obedit==NULL))
Changed adduplicate() to take the dupflags as an argument. so faking the Alt Key isnt needed anymore in Blender or python. Changed Pythons Object.Duplicate() to take keyword parms to enable duplication of spesific data. Eg- Object.Duplicate(mesh=1) # to duplicate mesh data also.
2006-01-02 10:40:13 +00:00
adduplicate(0, 0);
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_CTRLKEY) {
Initial revision
2002-10-12 11:37:38 +00:00
imagestodisplist();
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.qual==0)){
- added 'Textured Solid' to the Draw mode popup (DKEY).
2003-07-17 19:25:36 +00:00
pupval= pupmenu("Draw mode%t|BoundBox %x1|Wire %x2|OpenGL Solid %x3|Shaded Solid %x4|Textured Solid %x5");
Initial revision
2002-10-12 11:37:38 +00:00
if(pupval>0) {
G.vd->drawtype= pupval;
doredraw= 1;
}
}
break;
case EKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if (G.qual==0){
if(G.obedit) {
if(G.obedit->type==OB_MESH)
extrude_mesh();
else if(G.obedit->type==OB_CURVE)
addvert_Nurb('e');
else if(G.obedit->type==OB_SURF)
extrude_nurb();
else if(G.obedit->type==OB_ARMATURE)
EditMode armature: mirrored editing feature. - Option is in EditButtons, Armature panel. - Currently only local X-axis mirror (seems to be default anyway) - Transform then applies changes to the mirrored-name bone as well. - Extrude: also does the counterpart Bone - New: SHIFT+E extrude: extrudes 2 mirrored Bones out of a normal Bone. (creating names by appening _L and _R) Or in short: you can now model a full rig without any manual naming! Of course the names are not too nice... a couple of ideas to explore; - rename a mirrored bone renames counterpart too - allow in weightpaint mode to select Bones - and of course mirrored edit in PoseMode (if that's useful...) Important note: I tweaked the naming convention a bit; names like Bone_L.005 and Bone_R.005 are considered counterparts. However, if you use the "Flip names" option, the number extension is still truncated. BTW: Commits in Zr's code are fixes for gcc warnings. :)
2005-08-15 14:02:03 +00:00
extrude_armature(0);
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Added LSCM UV Unwrapping: http://www.loria.fr/~levy/Galleries/LSCM/index.html http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf Implementation Least Squares Conformal Maps parameterization, based on chapter 2 of: Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002, July 2002. Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define where a mesh will be cut when executing LSCM unwrapping. Seams can be marked and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark the selected edges as seams. Select Linked in Face Select Mode now only selects linked faces if no seams separate them. So if seams are defined, this will now select the 'face group' defined by the seams. Hotkey is still LKEY. LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local angles). Based on seams, the selected faces will be 'cut'. If multiple 'face groups' are selected, they will be unwrapped separately and packed in the image rectangle in the UV Editor. Packing uses a simple and fast algorithm, only designed to avoid having overlapping faces. LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel. Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then executed, these UV's will stay in place, allowing to tweak the solution. PKEY and ALT+PKEY will respectively pin and unpin selected UV's. Face Select Mode Drawing Changes: - Draw Seams option to enable disable drawing of seams - Draw Faces option to enable drawing of selected faces in transparent purple - Draw Hidden Edges option to enable drawing of edges of hidden faces - Draw Edges option to enable drawing of edges of visible faces The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
else if (G.qual==LR_CTRLKEY) {
if(G.obedit && G.obedit->type==OB_MESH)
Edge_Menu();
Seam Cutting in Faceselect Mode: - Mark Border Seam: mark edges on the border of face selection as seam. - Clear Seam: clears seams in selected faces. Hotkey: Ctrl+E - Alt+RMB Click: mark/clear edge as seam - Alt+Shift+RMB Click: mark/clear seams along the shortest/straightest path from last marked seam. The cost of the path also includes some measure of 'straightness' next to the typical distance to make things work more predicatble and edgeloop friendly. Note that this cuts a path from edge to edge, not vertex to vertex. That gives some nice control over the direction of the seam. Also includes: - Removed old LSCM code. - Fix updates glitches with DerivedMesh/Subsurf drawing in FaceSelect mode. Now there's a drawMappedFacesTex instead of drawFacesTex. - Minimize Stretch menu entry called Limit Stitch. - Removed the lasttface global, was being set before it was used anyway, so might as wel return from a function. - Moved some backbuf sampling code to drawview.c from editmesh, so it can be used by Faceselect and VPaint. - Use BLI_heap in parametrizer.c.
2006-02-08 21:01:00 +00:00
else if (G.f & G_FACESELECT)
seam_mark_clear_tface(0);
Added LSCM UV Unwrapping: http://www.loria.fr/~levy/Galleries/LSCM/index.html http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf Implementation Least Squares Conformal Maps parameterization, based on chapter 2 of: Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002, July 2002. Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define where a mesh will be cut when executing LSCM unwrapping. Seams can be marked and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark the selected edges as seams. Select Linked in Face Select Mode now only selects linked faces if no seams separate them. So if seams are defined, this will now select the 'face group' defined by the seams. Hotkey is still LKEY. LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local angles). Based on seams, the selected faces will be 'cut'. If multiple 'face groups' are selected, they will be unwrapped separately and packed in the image rectangle in the UV Editor. Packing uses a simple and fast algorithm, only designed to avoid having overlapping faces. LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel. Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then executed, these UV's will stay in place, allowing to tweak the solution. PKEY and ALT+PKEY will respectively pin and unpin selected UV's. Face Select Mode Drawing Changes: - Draw Seams option to enable disable drawing of seams - Draw Faces option to enable drawing of selected faces in transparent purple - Draw Hidden Edges option to enable drawing of edges of hidden faces - Draw Edges option to enable drawing of edges of visible faces The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
}
else if (G.qual==LR_SHIFTKEY) {
if (G.obedit && G.obedit->type==OB_MESH) {
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
initTransform(TFM_CREASE, CTX_EDGE);
Transform();
Added LSCM UV Unwrapping: http://www.loria.fr/~levy/Galleries/LSCM/index.html http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf Implementation Least Squares Conformal Maps parameterization, based on chapter 2 of: Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002, July 2002. Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define where a mesh will be cut when executing LSCM unwrapping. Seams can be marked and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark the selected edges as seams. Select Linked in Face Select Mode now only selects linked faces if no seams separate them. So if seams are defined, this will now select the 'face group' defined by the seams. Hotkey is still LKEY. LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local angles). Based on seams, the selected faces will be 'cut'. If multiple 'face groups' are selected, they will be unwrapped separately and packed in the image rectangle in the UV Editor. Packing uses a simple and fast algorithm, only designed to avoid having overlapping faces. LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel. Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then executed, these UV's will stay in place, allowing to tweak the solution. PKEY and ALT+PKEY will respectively pin and unpin selected UV's. Face Select Mode Drawing Changes: - Draw Seams option to enable disable drawing of seams - Draw Faces option to enable drawing of selected faces in transparent purple - Draw Hidden Edges option to enable drawing of edges of hidden faces - Draw Edges option to enable drawing of edges of visible faces The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
}
EditMode armature: mirrored editing feature. - Option is in EditButtons, Armature panel. - Currently only local X-axis mirror (seems to be default anyway) - Transform then applies changes to the mirrored-name bone as well. - Extrude: also does the counterpart Bone - New: SHIFT+E extrude: extrudes 2 mirrored Bones out of a normal Bone. (creating names by appening _L and _R) Or in short: you can now model a full rig without any manual naming! Of course the names are not too nice... a couple of ideas to explore; - rename a mirrored bone renames counterpart too - allow in weightpaint mode to select Bones - and of course mirrored edit in PoseMode (if that's useful...) Important note: I tweaked the naming convention a bit; names like Bone_L.005 and Bone_R.005 are considered counterparts. However, if you use the "Flip names" option, the number extension is still truncated. BTW: Commits in Zr's code are fixes for gcc warnings. :)
2005-08-15 14:02:03 +00:00
else if (G.obedit && G.obedit->type==OB_ARMATURE) {
extrude_armature(1);
}
Added LSCM UV Unwrapping: http://www.loria.fr/~levy/Galleries/LSCM/index.html http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf Implementation Least Squares Conformal Maps parameterization, based on chapter 2 of: Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002, July 2002. Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define where a mesh will be cut when executing LSCM unwrapping. Seams can be marked and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark the selected edges as seams. Select Linked in Face Select Mode now only selects linked faces if no seams separate them. So if seams are defined, this will now select the 'face group' defined by the seams. Hotkey is still LKEY. LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local angles). Based on seams, the selected faces will be 'cut'. If multiple 'face groups' are selected, they will be unwrapped separately and packed in the image rectangle in the UV Editor. Packing uses a simple and fast algorithm, only designed to avoid having overlapping faces. LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel. Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then executed, these UV's will stay in place, allowing to tweak the solution. PKEY and ALT+PKEY will respectively pin and unpin selected UV's. Face Select Mode Drawing Changes: - Draw Seams option to enable disable drawing of seams - Draw Faces option to enable drawing of selected faces in transparent purple - Draw Hidden Edges option to enable drawing of edges of hidden faces - Draw Edges option to enable drawing of edges of visible faces The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
case FKEY:
if(G.obedit) {
if(G.obedit->type==OB_MESH) {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY))
fill_mesh();
else if(G.qual==LR_ALTKEY)
beauty_fill();
else if(G.qual==LR_CTRLKEY)
edge_flip();
else if (G.qual==0)
Evil commit! Nothing really changed except; - EditVlak -> EditFace - variables called 'evl' -> 'efa' - functions with 'vlak' in it now have 'face' Just thought was nice starter for editmesh recode...
2004-09-18 20:15:37 +00:00
addedgeface_mesh();
With the royal blessing of guitarGeek, I commit the sharp/flat mesh editmode selection tools. The documentation can (currently) be found here: http://mediawiki.blender.org/index.php/Requests/SharpFlatSelect
2005-12-29 23:26:48 +00:00
else if ( G.qual ==
(LR_SHIFTKEY | LR_ALTKEY | LR_CTRLKEY) ) {
select_linked_flat_faces();
}
Initial revision
2002-10-12 11:37:38 +00:00
}
else if ELEM(G.obedit->type, OB_CURVE, OB_SURF) addsegment_nurb();
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_CTRLKEY)
sort_faces();
New: X-axis mirror weightpainting. - Set the button in Paint Panel, Edit buttons context - It assumes the mesh to be near-perfectly mirrored. Current threshold is set to 0.0001 (maximum difference allowed). In order to evaluate proper mirroring, a new option will be added in Mesh editmode later. - When the flipped group doesn't exist yet, it creates the group - Of course this doesn't work for mirror modifier! New: Select/activate flipped bone or vertex group - Press SHIFT+F in PoseMode or WeightPaint mode to get the flipped bone. Is especially to see while painting if the mirror copying works OK. New: "Apply Envelope to VertexGroup" uses X-mirror option too. Todo; check on mirror vertex painting, and mirror Mesh editmode.... The implementation is based on a 8x8x8 Octree, where vertex locations are stored. Vertices on the threshold boundary of an Octree node are filled in the neighbour nodes as well, ensuring that the lookup works with threshold. The current size of the Octree gives good speedup, even for 128k vertices it only needs 256 lookup cycles per checked vertex. Same code could be used for the bevel tool for example. src/meshtools.c: int mesh_octree_table(Object *ob, float *co, char mode) - mode 's' or 'e' is "start octree" or "end octree" - mode 'u' is "use", it then returns an index nr of the found vertex. (return -1 if not found)
2005-10-22 14:05:25 +00:00
else if((G.qual==LR_SHIFTKEY)) {
if(ob && (ob->flag & OB_POSEMODE))
pose_activate_flipped_bone();
else if(G.f & G_WEIGHTPAINT)
pose_activate_flipped_bone();
else
fly();
}
Initial revision
2002-10-12 11:37:38 +00:00
else {
New: X-axis mirror weightpainting. - Set the button in Paint Panel, Edit buttons context - It assumes the mesh to be near-perfectly mirrored. Current threshold is set to 0.0001 (maximum difference allowed). In order to evaluate proper mirroring, a new option will be added in Mesh editmode later. - When the flipped group doesn't exist yet, it creates the group - Of course this doesn't work for mirror modifier! New: Select/activate flipped bone or vertex group - Press SHIFT+F in PoseMode or WeightPaint mode to get the flipped bone. Is especially to see while painting if the mirror copying works OK. New: "Apply Envelope to VertexGroup" uses X-mirror option too. Todo; check on mirror vertex painting, and mirror Mesh editmode.... The implementation is based on a 8x8x8 Octree, where vertex locations are stored. Vertices on the threshold boundary of an Octree node are filled in the neighbour nodes as well, ensuring that the lookup works with threshold. The current size of the Octree gives good speedup, even for 128k vertices it only needs 256 lookup cycles per checked vertex. Same code could be used for the bevel tool for example. src/meshtools.c: int mesh_octree_table(Object *ob, float *co, char mode) - mode 's' or 'e' is "start octree" or "end octree" - mode 'u' is "use", it then returns an index nr of the found vertex. (return -1 if not found)
2005-10-22 14:05:25 +00:00
set_faceselect();
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
case GKEY:
bugfix #4251 Hotkey CTRL+ALT+G (manipulater translate) was overridden by group menu.
2006-05-30 07:55:33 +00:00
if(G.qual == LR_CTRLKEY)
group_operation_with_menu();
Orange branch: Revived hidden treasure, the Groups! Previous experiment (in 2000) didn't satisfy, it had even some primitive NLA option in groups... so, cleaned up the old code (removed most) and integrated it back in a more useful way. Usage: - CTRL+G gives menu to add group, add to existing group, or remove from groups. - In Object buttons, a new (should become first) Panel was added, showing not only Object "ID button" and Parent, but also the Groups the Object Belongs to. These buttons also allow rename, assigning or removing. - To indicate Objects are grouped, they're drawn in a (not theme yet, so temporal?) green wire color. - Use ALT+SHIFT mouse-select to (de)select an entire group But, the real power of groups is in the following features: -> Particle Force field and Guide control In the "Particle Motion" Panel, you can indicate a Group name, this then limits force fields or guides to members of that Group. (Note that layers still work on top of that... not sure about that). -> Light Groups In the Material "Shaders" Panel, you can indicate a Group name to limit lighting for the Material to lamps in this group. The Lights in a Group do need to be 'visible' for the Scene to be rendered (as usual). -> Group Duplicator In the Object "Anim" Panel, you can set any Object (use Empty!) to duplicate an entire Group. It will make copies of all Objects in that Group. Also works for animated Objects, but it will copy the current positions or deforms. Control over 'local timing' (so we can do Massive anims!) will be added later. (Note; this commit won't render Group duplicators yet, a fix in bf-blender will enable that, next commit will sync) -> Library Appending In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed. By appending or linking the Group itself, and use the Group Duplicator, you now can animate and position linked Objects. The nice thing is that the local saved file itself will only store the Group name that was linked, so on a next file read, the Group Objects will be re-read as stored (changed) in the Library file. (Note; current implementation also "gives a base" to linked Group Objects, to show them as Objects in the current Scene. Need that now for testing purposes, but probably will be removed later). -> Outliner Outliner now shows Groups as optio too, nice to organize your data a bit too! In General, Groups have a very good potential... for example, it could become default for MetaBall Objects too (jiri, I can help you later on how this works). All current 'layer relationships' in Blender should be dropped in time, I guess...
2005-12-06 10:55:30 +00:00
else if((G.qual==LR_SHIFTKEY))
Added select group meny to mesh editmode. Currently only works for faces. Try Shift+G in face/editmode.
2006-03-25 04:37:40 +00:00
if(G.obedit) {
if(G.obedit->type==OB_MESH)
select_mesh_group_menu();
} else
select_object_grouped_menu();
Initial new transform commit. Disabled behind defines. Uncomment //#define NEWTRANSFORM in transform.h to enable. Use at your own risk For more info, see Wiki: http://wiki.blender.org/bin/view.pl/Blenderdev/TransformRefactoring And tuhopuu mailing list: http://projects.blender.org/pipermail/tuhopuu-devel/ Notes for Ton (things that could need bulldozing: - TransData conversions. Objects is ok, but others could be rechecked. (some still use totsel). Need to add pose mode support. - Need more icons in the PET mode dropdown (in the 3D view header) for the new modes - Add new transform calls to Toolbox and Menus and the one right after Extrude. That's pretty much all I can think of now.
2005-02-14 02:53:36 +00:00
else if(G.qual==LR_ALTKEY) {
if(okee("Clear location")) {
clear_object('g');
}
Reflecting the discussions on Transform Manipulators... Here you can see the notes and pictures: http://www.blender3d.org/cms/Manipulator_Widgets.548.0.html The alternative rotate widgets are still under rt=2 and rt=3. Still enough work todo here, but hope it's a good step forward!
2005-04-24 13:22:24 +00:00
}
else if(G.qual== (LR_CTRLKEY|LR_ALTKEY)) {
v3d->twtype= V3D_MANIP_TRANSLATE;
doredraw= 1;
}
else if((G.qual==0)) {
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
initTransform(TFM_TRANSLATION, CTX_NONE);
Transform();
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
case HKEY:
if(G.obedit) {
if(G.obedit->type==OB_MESH) {
Lot of code... 2 new features: 1) Curve deform http://www.blender3d.org/cms/Curve_Deform.392.0.html Works simple as expected, but keep track of the rotation axis in F7 buttons (Track X Y Z) Only Mesh deform supported now. Code changes: - centralized deformation calls in curve_modifiers() mesh_modifiers() etcetera. Here also other effects can be added like wave. Now the evaluation order is fixed, but should become optional. It also doesnt use the Displist anymore as deform-input. That latter part is unfinished yet. This code also is used for Hooks and will be needed for softbody - made convention stricter that displists are being checked on in drawobject(), this to prevent routines to make new displists recursively (like armature does). Now a freedisplist() is sufficient to signal that a new displaylist should be made. 2) Object Hooks http://www.blender3d.org/cms/Object_Hooks.391.0.html Support for Hooks is added to Mesh, Lattice, Curve and Surface objects. For Armatures this would require some more work & research. Main goal for this feature is to provide quick & simple access to the underlying geometry in Objects on Object level, supporting hierarchies and Ipos etc.
2004-09-14 19:03:11 +00:00
if(G.qual==LR_CTRLKEY)
add_hook();
else if(G.qual==LR_ALTKEY)
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
reveal_mesh();
else if((G.qual==LR_SHIFTKEY))
hide_mesh(1);
else if((G.qual==0))
hide_mesh(0);
Initial revision
2002-10-12 11:37:38 +00:00
}
else if(G.obedit->type== OB_SURF) {
Lot of code... 2 new features: 1) Curve deform http://www.blender3d.org/cms/Curve_Deform.392.0.html Works simple as expected, but keep track of the rotation axis in F7 buttons (Track X Y Z) Only Mesh deform supported now. Code changes: - centralized deformation calls in curve_modifiers() mesh_modifiers() etcetera. Here also other effects can be added like wave. Now the evaluation order is fixed, but should become optional. It also doesnt use the Displist anymore as deform-input. That latter part is unfinished yet. This code also is used for Hooks and will be needed for softbody - made convention stricter that displists are being checked on in drawobject(), this to prevent routines to make new displists recursively (like armature does). Now a freedisplist() is sufficient to signal that a new displaylist should be made. 2) Object Hooks http://www.blender3d.org/cms/Object_Hooks.391.0.html Support for Hooks is added to Mesh, Lattice, Curve and Surface objects. For Armatures this would require some more work & research. Main goal for this feature is to provide quick & simple access to the underlying geometry in Objects on Object level, supporting hierarchies and Ipos etc.
2004-09-14 19:03:11 +00:00
if(G.qual==LR_CTRLKEY)
add_hook();
else if(G.qual==LR_ALTKEY)
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
revealNurb();
else if((G.qual==LR_SHIFTKEY))
hideNurb(1);
else if((G.qual==0))
hideNurb(0);
Initial revision
2002-10-12 11:37:38 +00:00
}
else if(G.obedit->type==OB_CURVE) {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY)
Lot of code... 2 new features: 1) Curve deform http://www.blender3d.org/cms/Curve_Deform.392.0.html Works simple as expected, but keep track of the rotation axis in F7 buttons (Track X Y Z) Only Mesh deform supported now. Code changes: - centralized deformation calls in curve_modifiers() mesh_modifiers() etcetera. Here also other effects can be added like wave. Now the evaluation order is fixed, but should become optional. It also doesnt use the Displist anymore as deform-input. That latter part is unfinished yet. This code also is used for Hooks and will be needed for softbody - made convention stricter that displists are being checked on in drawobject(), this to prevent routines to make new displists recursively (like armature does). Now a freedisplist() is sufficient to signal that a new displaylist should be made. 2) Object Hooks http://www.blender3d.org/cms/Object_Hooks.391.0.html Support for Hooks is added to Mesh, Lattice, Curve and Surface objects. For Armatures this would require some more work & research. Main goal for this feature is to provide quick & simple access to the underlying geometry in Objects on Object level, supporting hierarchies and Ipos etc.
2004-09-14 19:03:11 +00:00
add_hook();
else {
if(G.qual==LR_CTRLKEY)
autocalchandlesNurb_all(1); /* flag=1, selected */
else if((G.qual==LR_SHIFTKEY))
sethandlesNurb(1);
else if((G.qual==0))
sethandlesNurb(3);
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
DAG_object_flush_update(G.scene, G.obedit, OB_RECALC_DATA);
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
BIF_undo_push("Handle change");
Lot of code... 2 new features: 1) Curve deform http://www.blender3d.org/cms/Curve_Deform.392.0.html Works simple as expected, but keep track of the rotation axis in F7 buttons (Track X Y Z) Only Mesh deform supported now. Code changes: - centralized deformation calls in curve_modifiers() mesh_modifiers() etcetera. Here also other effects can be added like wave. Now the evaluation order is fixed, but should become optional. It also doesnt use the Displist anymore as deform-input. That latter part is unfinished yet. This code also is used for Hooks and will be needed for softbody - made convention stricter that displists are being checked on in drawobject(), this to prevent routines to make new displists recursively (like armature does). Now a freedisplist() is sufficient to signal that a new displaylist should be made. 2) Object Hooks http://www.blender3d.org/cms/Object_Hooks.391.0.html Support for Hooks is added to Mesh, Lattice, Curve and Surface objects. For Armatures this would require some more work & research. Main goal for this feature is to provide quick & simple access to the underlying geometry in Objects on Object level, supporting hierarchies and Ipos etc.
2004-09-14 19:03:11 +00:00
allqueue(REDRAWVIEW3D, 0);
}
}
else if(G.obedit->type==OB_LATTICE) {
if(G.qual==LR_CTRLKEY) add_hook();
Initial revision
2002-10-12 11:37:38 +00:00
}
- added "hide" flag for MetaElem. Hidden MetaElem doesn't influence polygonisation. It is useful for large scenes, when you work with lot of MetaElems. Example: http://e-learning.vslib.cz/~hnidek/pics/deer.jpg (PildaNovak's model) - shortcuts for hiding of MetaElems: H ......... hide all selected MetaElems Shift-H ... hide all unselected MetaElems Alt-H ..... unhide all hidden MetaElems - items in header menu of 3dview
2005-02-21 10:40:30 +00:00
else if(G.obedit->type==OB_MBALL) {
if(G.qual==LR_ALTKEY)
reveal_mball();
else if((G.qual==LR_SHIFTKEY))
hide_mball(1);
else if((G.qual==0))
hide_mball(0);
}
Armature "Envelope" editing. For defining the deformation distances of Bones, three values are being used now. The bone tip and root radius define the bone-shape itself and the "dist" defines the soft area around it. A full (user) doc is in CMS here; http://www.blender3d.org/cms/Armature_Envelopes.647.0.html Note: todo still is allowing both Vertex Deform Groups and these Envelopes together (and or per Bone). Also part of this commit is: - New: Hiding bones in EditMode. This is a separate 'hide flag', so you can keep the PoseMode hidden Bones separate from EditMode. (In the future we should do some kind of bone-grouping or so) - While transform(), the hotkeys G,R,S only switch mode when the previous mode was compatible. Caused conflicts with Crease/BoneDist/etc. - Deleting the last VertexGroup now also deletes the entire Mesh 'dvert' data. Sounds logical, but remember that VertexGroups are partial on a Mesh, partial on Object. Weird design decision though... Anyhoo, at this moment the only way to have Bone Envelopes deform, is by deleting all VertexGroups! - In PoseMode, the hotkey ALT+S now does both B-Bone size or Envelope, depending draw type. - In EditMode, Extrude now also works when only Root points were selected. - Weight editing is also symmetrical btw, with the "X-axis Mirror" option set.
2005-08-19 12:35:15 +00:00
else if(G.obedit->type==OB_ARMATURE) {
if (G.qual==0)
hide_selected_armature_bones();
else if (G.qual==LR_SHIFTKEY)
hide_unselected_armature_bones();
else if (G.qual==LR_ALTKEY)
show_all_armature_bones();
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.f & G_FACESELECT)
hide_tface();
Killed silly modal PoseMode mode! :) - PoseMode now is a state Armature Objects can be in. So, while in PoseMode for an Armature, you can just select another Object or Armature. - The old PoseMode options (transform, insert keys etc) are accessible with making the Armature Object 'active' (and have object in PoseMode). - At this moment no multiple Poses can be transformed/edited at the same time. - The old hotkey CTRL+TAB, and view3d header menu, still work to set an Object's PoseMode It was quite a lot recode, so tests & reports are welcome. Oh, as a bonus I added Lasso Select for Bones in PoseMode! It selects using only the line between root and tip of the Bone.
2005-07-23 18:52:31 +00:00
else if(ob && (ob->flag & OB_POSEMODE)) {
Hide selected/hide unselected/show all bones in posemode using the usual HKEY, shift-HKEY, alt-HKEY, and also through the menu. Thanks to malefico for the feature request, and thanks to broken for doing the menu code.
2004-01-03 05:07:31 +00:00
if (G.qual==0)
hide_selected_pose_bones();
else if (G.qual==LR_SHIFTKEY)
hide_unselected_pose_bones();
else if (G.qual==LR_ALTKEY)
show_all_pose_bones();
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
case IKEY:
Armature-Pose IK goodies! - Added option to the IK buttons, to have it use the 'tip' as end of the IK chain. I never really understood this old convention (IK didn't work on the Bone itself). Old files still will read OK though. But I made the "To Tip" a default when adding new IK constraints. - Hotkey CTRL+I: add IK, with option to have it adding an Empty target, or use a selected Bone as target. With the new non-modal PoseMode, it gives instant access to playing with the IK chain. - Hotkey ALT+I: clears IK, on all selected Bones - Hotkey ALT+C: clears Constraints on all selected Bones (incl IK)
2005-07-24 11:36:05 +00:00
if(G.obedit);
else if(G.qual==LR_CTRLKEY) {
if(ob && ob->type==OB_ARMATURE)
if(ob->flag & OB_POSEMODE)
pose_add_IK();
}
else if(G.qual==LR_ALTKEY) {
if(ob && ob->type==OB_ARMATURE)
if(ob->flag & OB_POSEMODE)
pose_clear_IK();
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
case JKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY) {
Killed silly modal PoseMode mode! :) - PoseMode now is a state Armature Objects can be in. So, while in PoseMode for an Armature, you can just select another Object or Armature. - The old PoseMode options (transform, insert keys etc) are accessible with making the Armature Object 'active' (and have object in PoseMode). - At this moment no multiple Poses can be transformed/edited at the same time. - The old hotkey CTRL+TAB, and view3d header menu, still work to set an Object's PoseMode It was quite a lot recode, so tests & reports are welcome. Oh, as a bonus I added Lasso Select for Bones in PoseMode! It selects using only the line between root and tip of the Bone.
2005-07-23 18:52:31 +00:00
if( ob ) {
Added a python hook to Joining objects Object.Join() Seperated the join calls from space.c and view3dmenu into join_menu() in space.c, like the select_group_menu(), okee's from join_curve, join_mesh.. etc are in join_menu() so python can call them without UI menu's in the way. this is also a bit neater since there were 2 places that were doing what join_menu() does now. - Cam
2005-12-30 14:17:15 +00:00
join_menu();
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if ((G.obedit) && ELEM(G.obedit->type, OB_CURVE, OB_SURF))
addsegment_nurb();
}
else if(G.obedit) {
Initial revision
2002-10-12 11:37:38 +00:00
if(G.obedit->type==OB_MESH) {
join_triangles();
}
}
break;
case KKEY:
if(G.obedit) {
Added K Menu for Loop Select, Loop Cut, and Knife tools.
2003-10-26 21:22:32 +00:00
if (G.obedit->type==OB_MESH) {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if (G.qual==LR_SHIFTKEY)
KnifeSubdivide(KNIFE_PROMPT);
else if (G.qual==0)
LoopMenu();
Robert (DetectiveThorn) Wenzlaff's Knife subdivide tool. See previous message on Bf-committers for description.
2003-10-12 23:43:26 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.obedit->type==OB_SURF)
printknots();
Initial revision
2002-10-12 11:37:38 +00:00
}
else {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY)) {
if(G.f & G_FACESELECT)
Made vertex clear work for selected faces from the menu, to be the same as Shift+K. Also makde Shift+K work in weightpaint mode.
2006-02-27 12:34:53 +00:00
if (G.f & G_WEIGHTPAINT)
clear_wpaint_selectedfaces();
else
clear_vpaint_selectedfaces();
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.f & G_VERTEXPAINT)
clear_vpaint();
else
select_select_keys();
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if (G.qual==0)
set_ob_ipoflags();
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case LKEY:
if(G.obedit) {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.obedit->type==OB_MESH)
- fixed hotkey error; apply object needs 2 combos - changed call to selectconnected to accept qualifier as input (need to do that for all such tools... no more checking inside!
2003-10-28 21:28:13 +00:00
selectconnected_mesh(G.qual);
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.obedit->type==OB_ARMATURE)
selectconnected_armature();
else if ELEM(G.obedit->type, OB_CURVE, OB_SURF)
selectconnected_nurb();
Initial revision
2002-10-12 11:37:38 +00:00
}
Killed silly modal PoseMode mode! :) - PoseMode now is a state Armature Objects can be in. So, while in PoseMode for an Armature, you can just select another Object or Armature. - The old PoseMode options (transform, insert keys etc) are accessible with making the Armature Object 'active' (and have object in PoseMode). - At this moment no multiple Poses can be transformed/edited at the same time. - The old hotkey CTRL+TAB, and view3d header menu, still work to set an Object's PoseMode It was quite a lot recode, so tests & reports are welcome. Oh, as a bonus I added Lasso Select for Bones in PoseMode! It selects using only the line between root and tip of the Bone.
2005-07-23 18:52:31 +00:00
else if(ob && (ob->flag & OB_POSEMODE)) {
selectconnected_posearmature();
Initial revision
2002-10-12 11:37:38 +00:00
}
else {
Merging over some uv editor tweaks from tuhopuu: - Moved Weld/Align out of transform code, now it's a menu. - Removed confirmation popups for LSCM unwrapping in the uv editor, didn't make sense anymore now we have undo. - Extended select linked, to work more like it does in edit mode: - L: select linked uvs/faces under the mouse - Shift+L: select/deselect linked uvs/faces under the mouse (like shift+click for selecting single uvs/faces) - Ctrl+L: how L worked before - More accurate uv selection: when selecting one uv from a group of uvs that are in the same position, it now selects the uv belonging to the face the mouse is over, instead of a random uv. - 'View Selected' (numpad .-key) for both faceselect mode and the uv editor.
2005-04-23 01:36:08 +00:00
if(G.f & G_FACESELECT) {
if((G.qual==0))
select_linked_tfaces(0);
else if((G.qual==LR_SHIFTKEY))
select_linked_tfaces(1);
else if(G.qual==LR_CTRLKEY)
select_linked_tfaces(2);
}
else {
if((G.qual==0))
* Whoops, committed something I shouldn't have in the last one. Reverting. * Added 'Make Local' to the menus. Also a minor capitalisation tweak.
2006-06-01 09:03:43 +00:00
make_local_menu();
Merging over some uv editor tweaks from tuhopuu: - Moved Weld/Align out of transform code, now it's a menu. - Removed confirmation popups for LSCM unwrapping in the uv editor, didn't make sense anymore now we have undo. - Extended select linked, to work more like it does in edit mode: - L: select linked uvs/faces under the mouse - Shift+L: select/deselect linked uvs/faces under the mouse (like shift+click for selecting single uvs/faces) - Ctrl+L: how L worked before - More accurate uv selection: when selecting one uv from a group of uvs that are in the same position, it now selects the uv belonging to the face the mouse is over, instead of a random uv. - 'View Selected' (numpad .-key) for both faceselect mode and the uv editor.
2005-04-23 01:36:08 +00:00
else if((G.qual==LR_SHIFTKEY))
selectlinks_menu();
else if(G.qual==LR_CTRLKEY)
make_links_menu();
}
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
added Goofster's mergemenu to the alt-w menu. revised by Matt Ebb
2003-05-10 12:22:26 +00:00
case MKEY:
New "Mirror UVs" function in faceselect mode, to complement Rotate UVs. It mirrors the UVs or Vertex Colors of individual faces (on the red edge of the UV face). Patch provided by Martin Poirier, thanks!
2005-08-11 00:00:24 +00:00
if((G.obedit==0) && (G.f & G_FACESELECT) && (G.qual==0))
mirror_uv_tface();
else if(G.obedit){
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_ALTKEY) {
delimiters are you friends fixed a silly bug with merge and mirror
2003-11-16 00:31:27 +00:00
if(G.obedit->type==OB_MESH) {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
mergemenu();
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
DAG_object_flush_update(G.scene, G.obedit, OB_RECALC_DATA);
delimiters are you friends fixed a silly bug with merge and mirror
2003-11-16 00:31:27 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
Mirror in object mode. Works like Mirror in edit mode but only works on local axis (doing it differently would require a much more clever algorithm). Mirror Object is assigned to Ctrl-M and I've add Ctrl-M to call Mirror Edit (on top of M alone) for practical reason. We should consider switching both to Ctrl-M for pratical reasons but I kept M for backward compatibility Also added the menu and toolbox counterparts. Minor addition to arithb.c: A function to print vectors to the console. Easier for debuging.
2004-04-24 21:09:06 +00:00
else if((G.qual==0) || (G.qual==LR_CTRLKEY)) {
Some random small stuff packed in one commit: - Moved a couple of undo_push_mesh after the action has been confirmed (mainly bevel, merge and mirror) - Split mirror in two functions, interface and functionality - Simplified the code of the merge function
2003-12-31 22:44:26 +00:00
mirrormenu();
delimiters are you friends fixed a silly bug with merge and mirror
2003-11-16 00:31:27 +00:00
}
Doing the hotkey modifiers for select non-manifold the Ton way.
2005-01-30 21:33:12 +00:00
if ( G.qual == (LR_SHIFTKEY | LR_ALTKEY | LR_CTRLKEY) ) {
Three new selection techniques in mesh edit mode, two of which are controversial: * "Select non-manifold geometry" via ctrl-alt-shift-M, or through the menu or toolbox. Great for troubleshooting weirdness on a subsurf, or for preparing a mesh for decimation or for rapid prototyping. * "Select more" via ctrl-PADPLUS, or through the menu or toolbox. If a selected vert shares an edge with an unselected vert, the unselected one gets selected too. Similar to PADPLUS in wings3d. This is controversial because maybe it would be more useful to select all of the verts that share a face (instead of just an edge) with a selected vert -- what do *you* think? * "Select less" via ctrl-PADMINUS, or through the menu or toolbox. If a selected vert shares an edge with an unselected vert, the selected one gets unselected too. Similar to PADMINUS in wings3d. Also, selected non-manifold geometry becomes unselected. This is controversial because of the non-manifold stuff ... is it needed? What do *you* think?
2004-01-03 06:01:16 +00:00
if(G.obedit->type==OB_MESH) select_non_manifold();
}
added Goofster's mergemenu to the alt-w menu. revised by Matt Ebb
2003-05-10 12:22:26 +00:00
}
Mirror in object mode. Works like Mirror in edit mode but only works on local axis (doing it differently would require a much more clever algorithm). Mirror Object is assigned to Ctrl-M and I've add Ctrl-M to call Mirror Edit (on top of M alone) for practical reason. We should consider switching both to Ctrl-M for pratical reasons but I kept M for backward compatibility Also added the menu and toolbox counterparts. Minor addition to arithb.c: A function to print vectors to the console. Easier for debuging.
2004-04-24 21:09:06 +00:00
else if(G.qual & LR_CTRLKEY) {
mirrormenu();
}
else if(G.qual==0) {
Orange request; Bones in Armature now have own layer settings. Works like for Object layers, but local within Armature itself. Each Bone can be in (16 now) any layer, and the Armature layer defines what is visible or not. Also note that hiding will still work too. Since the Blender code is *stuffed* with Bone options now, this commit requires a good test if all tools we got now comply to layers... (I counted 130 cases for checking for selected Bones in code!) In PoseMode; hotkey M will show 'movetolayer' menu. Not in editmode... then its the mirror menu. Todo: make action/nla drawing comply to Armature layer settings.
2005-12-07 12:36:26 +00:00
if(ob && (ob->flag & OB_POSEMODE))
pose_movetolayer();
else
movetolayer();
added Goofster's mergemenu to the alt-w menu. revised by Matt Ebb
2003-05-10 12:22:26 +00:00
}
break;
Initial revision
2002-10-12 11:37:38 +00:00
case NKEY:
- added buttons for NKEY menu editmode curve, nurbs, armature - same for PoseMode
2003-10-28 16:26:51 +00:00
if((G.qual==0)) {
Popular request: the floating panels (NKEY) now close on a 2nd NKEY command. This for all current NKEY menus by default. Can be standard for each hotkey controlled Panel from now on; use toggle_blockhandler() for it. Another popular request: hotkey enabled Panels now optionally reopen on the previous location, instead of under mouse. This option "Pinned" is a user option now. Optional for later; have it as per-panel option... dunno! The last request, close on mouse-exit, won't be implemented, this intrudes with Panel consistancy, and is pretty OK solved with NKEY-NKEY now.
2004-06-19 12:25:28 +00:00
toggle_blockhandler(curarea, VIEW3D_HANDLER_OBJECT, UI_PNL_TO_MOUSE);
- added buttons for NKEY menu editmode curve, nurbs, armature - same for PoseMode
2003-10-28 16:26:51 +00:00
allqueue(REDRAWVIEW3D, 0);
}
else if(G.obedit) {
Initial revision
2002-10-12 11:37:38 +00:00
switch (G.obedit->type){
case OB_ARMATURE:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY){
* Big, mundane clean up and edit of (error/ok/etc) messages and pupmenu()s. Edited spelling and grammar, stylistic consistency, etc. I added the guidelines and rationale that I used to the CMS here: http://www.blender3d.org/cms/Language_and_terminology.338.0.html Next step is to get icons in there, to make it easier to see at a glance what sort of message (and how much attention should be paid to it, or if it can be dismissed with a flick of the mouse, eg. boring remove doubles notifications) mockup: http://mke3.net:9000/blender/ui/controls/error_ok_icons.png
2004-06-05 05:55:15 +00:00
if (okee("Recalculate bone roll angles")) {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
auto_align_armature();
allqueue(REDRAWVIEW3D, 0);
}
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
case OB_MESH:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==(LR_SHIFTKEY|LR_CTRLKEY)) {
* Big, mundane clean up and edit of (error/ok/etc) messages and pupmenu()s. Edited spelling and grammar, stylistic consistency, etc. I added the guidelines and rationale that I used to the CMS here: http://www.blender3d.org/cms/Language_and_terminology.338.0.html Next step is to get icons in there, to make it easier to see at a glance what sort of message (and how much attention should be paid to it, or if it can be dismissed with a flick of the mouse, eg. boring remove doubles notifications) mockup: http://mke3.net:9000/blender/ui/controls/error_ok_icons.png
2004-06-05 05:55:15 +00:00
if(okee("Recalculate normals inside")) {
- Preserved selections in undo. - Fixed spurious "recalc norm" enties in Undo.
2003-10-22 00:52:26 +00:00
righthandfaces(2);
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
allqueue(REDRAWVIEW3D, 0);
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
BIF_undo_push("Recalculate normals inside");
- Preserved selections in undo. - Fixed spurious "recalc norm" enties in Undo.
2003-10-22 00:52:26 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_CTRLKEY){
* Big, mundane clean up and edit of (error/ok/etc) messages and pupmenu()s. Edited spelling and grammar, stylistic consistency, etc. I added the guidelines and rationale that I used to the CMS here: http://www.blender3d.org/cms/Language_and_terminology.338.0.html Next step is to get icons in there, to make it easier to see at a glance what sort of message (and how much attention should be paid to it, or if it can be dismissed with a flick of the mouse, eg. boring remove doubles notifications) mockup: http://mke3.net:9000/blender/ui/controls/error_ok_icons.png
2004-06-05 05:55:15 +00:00
if(okee("Recalculate normals outside")) {
- Preserved selections in undo. - Fixed spurious "recalc norm" enties in Undo.
2003-10-22 00:52:26 +00:00
righthandfaces(1);
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
allqueue(REDRAWVIEW3D, 0);
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
BIF_undo_push("Recalculate normals outside");
- Preserved selections in undo. - Fixed spurious "recalc norm" enties in Undo.
2003-10-22 00:52:26 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
}
}
- added buttons for NKEY menu editmode curve, nurbs, armature - same for PoseMode
2003-10-28 16:26:51 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
break;
case OKEY:
Removed casting warnings from transform_manipulator. PET is now checked as a transform flag during transform. Much cleaner that way for NOPET context (extrude, duplicate) Added Sphere as a new PET falloff mode (icon and all) and reordered them around in a more logical fashion (IMHO). Also brought back Subsurf toggle with Shift-O (was supposed to be for PET object mode but that was canned).
2005-04-01 18:39:39 +00:00
if (G.obedit) {
if (G.qual==LR_SHIFTKEY) {
* Allow Shift O proportional hotkey to cycle to random mode in 3D view, looks like I only got the image editor in previous commit.
2006-10-11 01:19:14 +00:00
G.scene->prop_mode = (G.scene->prop_mode+1)%7;
UI cleanup work; Proportional edit: - Proportional mode added to header as button/menu. Including new option to have only connected geometry influenced. - Added icons for proportional & proportional modes - Make proportional edit data part of Scene, so all gets saved. The Global flag G_PROPORTIONAL was removed - Made sure #defines get used properly, also tweaked order for proportional so it starts with regular 'smooth' by default. - Use ALT+O in editmode to switch to new proportional 'connected' mode Other UI stuff: - in EditMode, the layer buttons get hidden... the amount of icons in 3d header grows to fast. :) - made less ugly icons for the Manipulators. Still can be better. - Added alpha-filter for pre-processing Icon-image, giving nicer display of icon-antialising on dark or bright backdrops - disabled Manipulators when in editmode, and current layers don't show the edited data. - Added the value used to define Normal size (editmode draw) in Scene too, so it gets saved.
2005-05-03 10:54:42 +00:00
allqueue(REDRAWHEADERS, 0);
}
else if((G.qual==LR_ALTKEY)) {
if(G.scene->proportional==2) G.scene->proportional= 1;
else G.scene->proportional= 2;
Removed casting warnings from transform_manipulator. PET is now checked as a transform flag during transform. Much cleaner that way for NOPET context (extrude, duplicate) Added Sphere as a new PET falloff mode (icon and all) and reordered them around in a more logical fashion (IMHO). Also brought back Subsurf toggle with Shift-O (was supposed to be for PET object mode but that was canned).
2005-04-01 18:39:39 +00:00
allqueue(REDRAWHEADERS, 0);
}
else if((G.qual==0)) {
UI cleanup work; Proportional edit: - Proportional mode added to header as button/menu. Including new option to have only connected geometry influenced. - Added icons for proportional & proportional modes - Make proportional edit data part of Scene, so all gets saved. The Global flag G_PROPORTIONAL was removed - Made sure #defines get used properly, also tweaked order for proportional so it starts with regular 'smooth' by default. - Use ALT+O in editmode to switch to new proportional 'connected' mode Other UI stuff: - in EditMode, the layer buttons get hidden... the amount of icons in 3d header grows to fast. :) - made less ugly icons for the Manipulators. Still can be better. - Added alpha-filter for pre-processing Icon-image, giving nicer display of icon-antialising on dark or bright backdrops - disabled Manipulators when in editmode, and current layers don't show the edited data. - Added the value used to define Normal size (editmode draw) in Scene too, so it gets saved.
2005-05-03 10:54:42 +00:00
G.scene->proportional= !G.scene->proportional;
Removed casting warnings from transform_manipulator. PET is now checked as a transform flag during transform. Much cleaner that way for NOPET context (extrude, duplicate) Added Sphere as a new PET falloff mode (icon and all) and reordered them around in a more logical fashion (IMHO). Also brought back Subsurf toggle with Shift-O (was supposed to be for PET object mode but that was canned).
2005-04-01 18:39:39 +00:00
allqueue(REDRAWHEADERS, 0);
}
Initial new transform commit. Disabled behind defines. Uncomment //#define NEWTRANSFORM in transform.h to enable. Use at your own risk For more info, see Wiki: http://wiki.blender.org/bin/view.pl/Blenderdev/TransformRefactoring And tuhopuu mailing list: http://projects.blender.org/pipermail/tuhopuu-devel/ Notes for Ton (things that could need bulldozing: - TransData conversions. Objects is ok, but others could be rechecked. (some still use totsel). Need to add pose mode support. - Need more icons in the PET mode dropdown (in the 3D view header) for the new modes - Add new transform calls to Toolbox and Menus and the one right after Extrude. That's pretty much all I can think of now.
2005-02-14 02:53:36 +00:00
}
Removed casting warnings from transform_manipulator. PET is now checked as a transform flag during transform. Much cleaner that way for NOPET context (extrude, duplicate) Added Sphere as a new PET falloff mode (icon and all) and reordered them around in a more logical fashion (IMHO). Also brought back Subsurf toggle with Shift-O (was supposed to be for PET object mode but that was canned).
2005-04-01 18:39:39 +00:00
else if((G.qual==LR_SHIFTKEY)) {
fix bug #397: shift+o caused a crash if no object was active (tsk...)
2003-07-23 00:24:42 +00:00
if(ob && ob->type == OB_MESH) {
- removed duplicate flags from BKE_mesh.h - removed rendermesh_uses_displist (no longer relevant) - converted appropriate me->flag tests to using mesh_uses_displist - made vert and face counting (for info header) use proper counts - changed flip_subdivision to allow level==0 argument - ps. thanks for subsurf orco fix ton
2004-01-08 04:42:29 +00:00
flip_subdivison(ob, -1);
- restored proportional hotkey. it now works again as follows: In editmode; press OKEY to toggle proportional editing press SHIFT+OKEY to toggle sharp/smooth proportional editing - outside of editmode, the SHIFT+O toggles subsurf on/off - its a compromise... :)
2003-07-21 17:44:23 +00:00
}
}
Initial new transform commit. Disabled behind defines. Uncomment //#define NEWTRANSFORM in transform.h to enable. Use at your own risk For more info, see Wiki: http://wiki.blender.org/bin/view.pl/Blenderdev/TransformRefactoring And tuhopuu mailing list: http://projects.blender.org/pipermail/tuhopuu-devel/ Notes for Ton (things that could need bulldozing: - TransData conversions. Objects is ok, but others could be rechecked. (some still use totsel). Need to add pose mode support. - Need more icons in the PET mode dropdown (in the 3D view header) for the new modes - Add new transform calls to Toolbox and Menus and the one right after Extrude. That's pretty much all I can think of now.
2005-02-14 02:53:36 +00:00
else if(G.qual==LR_ALTKEY) {
if(okee("Clear origin")) {
clear_object('o');
}
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
- restored proportional hotkey. it now works again as follows: In editmode; press OKEY to toggle proportional editing press SHIFT+OKEY to toggle sharp/smooth proportional editing - outside of editmode, the SHIFT+O toggles subsurf on/off - its a compromise... :)
2003-07-21 17:44:23 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
case PKEY:
if(G.obedit) {
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
if(G.qual==LR_CTRLKEY || G.qual==(LR_SHIFTKEY|LR_CTRLKEY)) {
if(G.obedit->type==OB_ARMATURE)
make_bone_parent();
else
make_parent();
}
else if(G.qual==LR_ALTKEY && G.obedit->type==OB_ARMATURE)
clear_bone_parent();
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.qual==0) && G.obedit->type==OB_MESH)
separatemenu();
else if ((G.qual==0) && ELEM(G.obedit->type, OB_CURVE, OB_SURF))
separate_nurb();
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
else if (G.qual==LR_SHIFTKEY) {
initTransform(TFM_PUSHPULL, CTX_NONE);
Transform();
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
- fix: SHIFT+CTRL+P didn't work (make parent without inverse) - added: when start blender in debug mode (blender -b) it prints the depth of framebuffer.
2003-12-09 17:46:40 +00:00
else if(G.qual==LR_CTRLKEY || G.qual==(LR_SHIFTKEY|LR_CTRLKEY))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
make_parent();
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
else if(G.qual==LR_SHIFTKEY) {
Fix: buttons previewrender was re-rendering on scrolling a lot, this due to rounding noise when trying to detect if previewsize changed. Made it use a threshold now. Fix: SHIFT+P in editmode is still push/pull, outside editmode it'll do the preview render. (Note; editmode changes are not updated anyway!)
2006-01-30 19:39:05 +00:00
if(G.obedit) {
initTransform(TFM_PUSHPULL, CTX_NONE);
Transform();
}
else {
toggle_blockhandler(curarea, VIEW3D_HANDLER_PREVIEW, 0);
doredraw= 1;
}
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_ALTKEY)
clear_parent();
else if((G.qual==0)) {
P back to Play Game :) <shift>P = preview toggle. Don't know what the previous <shift>P did, something like 'Transform'. Ton, can you look into this?
2006-01-30 05:43:07 +00:00
start_game();
Initial revision
2002-10-12 11:37:38 +00:00
}
Preliminary work on faceloop selection and faceloop cutting. Commiting in steps to prevent Ton from sneaking in between me! :D some small things to fix: - cutting on 1 face doesn't work - options now under shift/ctrl R, they will be under a K menu that will contain DetectiveThorn's Knife tool too. Roel
2003-10-17 19:59:32 +00:00
break;
Initial revision
2002-10-12 11:37:38 +00:00
case RKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.obedit==0) && (G.f & G_FACESELECT) && (G.qual==0))
rotate_uv_tface();
Initial new transform commit. Disabled behind defines. Uncomment //#define NEWTRANSFORM in transform.h to enable. Use at your own risk For more info, see Wiki: http://wiki.blender.org/bin/view.pl/Blenderdev/TransformRefactoring And tuhopuu mailing list: http://projects.blender.org/pipermail/tuhopuu-devel/ Notes for Ton (things that could need bulldozing: - TransData conversions. Objects is ok, but others could be rechecked. (some still use totsel). Need to add pose mode support. - Need more icons in the PET mode dropdown (in the 3D view header) for the new modes - Add new transform calls to Toolbox and Menus and the one right after Extrude. That's pretty much all I can think of now.
2005-02-14 02:53:36 +00:00
else if(G.qual==LR_ALTKEY) {
if(okee("Clear rotation")) {
clear_object('r');
}
Reflecting the discussions on Transform Manipulators... Here you can see the notes and pictures: http://www.blender3d.org/cms/Manipulator_Widgets.548.0.html The alternative rotate widgets are still under rt=2 and rt=3. Still enough work todo here, but hope it's a good step forward!
2005-04-24 13:22:24 +00:00
}
else if(G.qual== (LR_CTRLKEY|LR_ALTKEY)) {
v3d->twtype= V3D_MANIP_ROTATE;
doredraw= 1;
}
else if (G.obedit) {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY)) {
Preliminary work on faceloop selection and faceloop cutting. Commiting in steps to prevent Ton from sneaking in between me! :D some small things to fix: - cutting on 1 face doesn't work - options now under shift/ctrl R, they will be under a K menu that will contain DetectiveThorn's Knife tool too. Roel
2003-10-17 19:59:32 +00:00
if ELEM(G.obedit->type, OB_CURVE, OB_SURF)
selectrow_nurb();
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_CTRLKEY) {
Preliminary work on faceloop selection and faceloop cutting. Commiting in steps to prevent Ton from sneaking in between me! :D some small things to fix: - cutting on 1 face doesn't work - options now under shift/ctrl R, they will be under a K menu that will contain DetectiveThorn's Knife tool too. Roel
2003-10-17 19:59:32 +00:00
if (G.obedit->type==OB_MESH)
Well here it is. Subdivision/Loop Tools Recode Commit #1 Ton has been pushing me to get this in and finish it up with help, so here is a run down of the commit Revised Features Subdivide now is Edge based, allows for multicut Loopcut was recoded, now has multi option Knife tool now has multi option New Features Edgeslide Edgering select Removed Features Alt-B Edgeloop selection (use alt-RMB in edgemode) Shift-R Faceloop selection (use alt-RMB in facemode) Old Subdivide (Except for smooth which is left in until new one works) Todo Subdivide Smooth Math is broken - could use some help here (look for alter_co in editmesh_tools.c) Tweak mouse control of Edgeslide is hackish ATM Add Non-proportional movement to edgeslide Add smooth option to new loopcut I probably left something out. See here for more info http://wiki.blender.org/bin/view.pl/Blenderdev/EdgeSubdivision
2005-07-13 15:20:40 +00:00
CutEdgeloop(1);
BIF_undo_push("Cut Edgeloop");
Preliminary work on faceloop selection and faceloop cutting. Commiting in steps to prevent Ton from sneaking in between me! :D some small things to fix: - cutting on 1 face doesn't work - options now under shift/ctrl R, they will be under a K menu that will contain DetectiveThorn's Knife tool too. Roel
2003-10-17 19:59:32 +00:00
}
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
else if((G.qual==0)) {
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
initTransform(TFM_ROTATION, CTX_NONE);
Transform();
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
}
Preliminary work on faceloop selection and faceloop cutting. Commiting in steps to prevent Ton from sneaking in between me! :D some small things to fix: - cutting on 1 face doesn't work - options now under shift/ctrl R, they will be under a K menu that will contain DetectiveThorn's Knife tool too. Roel
2003-10-17 19:59:32 +00:00
}
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
else if((G.qual==0)) {
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
initTransform(TFM_ROTATION, CTX_NONE);
Transform();
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
case SKEY:
Reflecting the discussions on Transform Manipulators... Here you can see the notes and pictures: http://www.blender3d.org/cms/Manipulator_Widgets.548.0.html The alternative rotate widgets are still under rt=2 and rt=3. Still enough work todo here, but hope it's a good step forward!
2005-04-24 13:22:24 +00:00
if(G.qual== (LR_CTRLKEY|LR_ALTKEY)) {
v3d->twtype= V3D_MANIP_SCALE;
doredraw= 1;
}
else if(G.obedit) {
More armature goodies; The B-Bones! (where the B can be read as 'block' or 'bezier' or 'b-spline') - set option on/off in edit buttons, armature panel - scaling of B-bones only works in editmode, use ALT+S to make bones fatter or thinner. Also works for constrainted transform - In pose mode, you now have a buttons panel with per-bone settings too Here you can find the "segments" button, which allows bones to interpolate between previous/next bones, including roll. - Buttons to control interpolation ("In" and "Out" are disabled, doesn't work satisfying yet NOTE: this doesn't give deform yet! Main purpose for now is to test if this drawing method serves to animate/pose armatures well. Still need to review proper interpolation methods... maybe bezier is too limited.
2005-07-16 19:07:02 +00:00
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
if(G.qual==LR_ALTKEY) {
Armature "Envelope" editing. For defining the deformation distances of Bones, three values are being used now. The bone tip and root radius define the bone-shape itself and the "dist" defines the soft area around it. A full (user) doc is in CMS here; http://www.blender3d.org/cms/Armature_Envelopes.647.0.html Note: todo still is allowing both Vertex Deform Groups and these Envelopes together (and or per Bone). Also part of this commit is: - New: Hiding bones in EditMode. This is a separate 'hide flag', so you can keep the PoseMode hidden Bones separate from EditMode. (In the future we should do some kind of bone-grouping or so) - While transform(), the hotkeys G,R,S only switch mode when the previous mode was compatible. Caused conflicts with Crease/BoneDist/etc. - Deleting the last VertexGroup now also deletes the entire Mesh 'dvert' data. Sounds logical, but remember that VertexGroups are partial on a Mesh, partial on Object. Weird design decision though... Anyhoo, at this moment the only way to have Bone Envelopes deform, is by deleting all VertexGroups! - In PoseMode, the hotkey ALT+S now does both B-Bone size or Envelope, depending draw type. - In EditMode, Extrude now also works when only Root points were selected. - Weight editing is also symmetrical btw, with the "X-axis Mirror" option set.
2005-08-19 12:35:15 +00:00
if(G.obedit->type==OB_ARMATURE) {
More armature goodies; The B-Bones! (where the B can be read as 'block' or 'bezier' or 'b-spline') - set option on/off in edit buttons, armature panel - scaling of B-bones only works in editmode, use ALT+S to make bones fatter or thinner. Also works for constrainted transform - In pose mode, you now have a buttons panel with per-bone settings too Here you can find the "segments" button, which allows bones to interpolate between previous/next bones, including roll. - Buttons to control interpolation ("In" and "Out" are disabled, doesn't work satisfying yet NOTE: this doesn't give deform yet! Main purpose for now is to test if this drawing method serves to animate/pose armatures well. Still need to review proper interpolation methods... maybe bezier is too limited.
2005-07-16 19:07:02 +00:00
initTransform(TFM_BONESIZE, CTX_NONE);
Armature "Envelope" editing. For defining the deformation distances of Bones, three values are being used now. The bone tip and root radius define the bone-shape itself and the "dist" defines the soft area around it. A full (user) doc is in CMS here; http://www.blender3d.org/cms/Armature_Envelopes.647.0.html Note: todo still is allowing both Vertex Deform Groups and these Envelopes together (and or per Bone). Also part of this commit is: - New: Hiding bones in EditMode. This is a separate 'hide flag', so you can keep the PoseMode hidden Bones separate from EditMode. (In the future we should do some kind of bone-grouping or so) - While transform(), the hotkeys G,R,S only switch mode when the previous mode was compatible. Caused conflicts with Crease/BoneDist/etc. - Deleting the last VertexGroup now also deletes the entire Mesh 'dvert' data. Sounds logical, but remember that VertexGroups are partial on a Mesh, partial on Object. Weird design decision though... Anyhoo, at this moment the only way to have Bone Envelopes deform, is by deleting all VertexGroups! - In PoseMode, the hotkey ALT+S now does both B-Bone size or Envelope, depending draw type. - In EditMode, Extrude now also works when only Root points were selected. - Weight editing is also symmetrical btw, with the "X-axis Mirror" option set.
2005-08-19 12:35:15 +00:00
}
* Shrink/Fatten for bevelled curves This is a much faster and easier way to give a bevelled curve a taper, without using taper curves. Each point on a curve now has a 'radius' value that you can shrink and fatten using Alt S, which will influence the taper when the curve is bevelled (either with a bevob, or with front/back turned off and a bevel dept set). Alt S shrinks and fattens the selected points in an interactive transform, and you can set an absolute radius for selected points with 'Set Radius' in the curve specials menu. See demo: http://mke3.net/blender/etc/curve_shrinkfatten-h264.mov This can be a quick way to create revolved surfaces (eg. http://mke3.net/blender/etc/wineglass-h264.mov ) and it would be very interesting to use this radius value in other tools, such as a 'freehand curve' tool that would let you draw a curve freehand, with the radius affected by pen pressure, or even using the radius at each point to control curve guides for particles more precisely, rather than the continous maxdist.
2006-08-13 07:37:51 +00:00
else if (G.obedit->type==OB_CURVE) {
initTransform(TFM_CURVE_SHRINKFATTEN, CTX_NONE);
} else {
More armature goodies; The B-Bones! (where the B can be read as 'block' or 'bezier' or 'b-spline') - set option on/off in edit buttons, armature panel - scaling of B-bones only works in editmode, use ALT+S to make bones fatter or thinner. Also works for constrainted transform - In pose mode, you now have a buttons panel with per-bone settings too Here you can find the "segments" button, which allows bones to interpolate between previous/next bones, including roll. - Buttons to control interpolation ("In" and "Out" are disabled, doesn't work satisfying yet NOTE: this doesn't give deform yet! Main purpose for now is to test if this drawing method serves to animate/pose armatures well. Still need to review proper interpolation methods... maybe bezier is too limited.
2005-07-16 19:07:02 +00:00
initTransform(TFM_SHRINKFATTEN, CTX_NONE);
* Shrink/Fatten for bevelled curves This is a much faster and easier way to give a bevelled curve a taper, without using taper curves. Each point on a curve now has a 'radius' value that you can shrink and fatten using Alt S, which will influence the taper when the curve is bevelled (either with a bevob, or with front/back turned off and a bevel dept set). Alt S shrinks and fattens the selected points in an interactive transform, and you can set an absolute radius for selected points with 'Set Radius' in the curve specials menu. See demo: http://mke3.net/blender/etc/curve_shrinkfatten-h264.mov This can be a quick way to create revolved surfaces (eg. http://mke3.net/blender/etc/wineglass-h264.mov ) and it would be very interesting to use this radius value in other tools, such as a 'freehand curve' tool that would let you draw a curve freehand, with the radius affected by pen pressure, or even using the radius at each point to control curve guides for particles more precisely, rather than the continous maxdist.
2006-08-13 07:37:51 +00:00
}
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
Transform();
}
else if(G.qual==LR_CTRLKEY) {
initTransform(TFM_SHEAR, CTX_NONE);
Transform();
}
Missing feature: Snap menu was not available in editmode. Fixed compiler warning about ambiguous else in TKEY block.
2003-10-28 07:15:02 +00:00
else if(G.qual==LR_SHIFTKEY)
snapmenu();
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
else if(G.qual==0) {
Armature "Envelope" editing. For defining the deformation distances of Bones, three values are being used now. The bone tip and root radius define the bone-shape itself and the "dist" defines the soft area around it. A full (user) doc is in CMS here; http://www.blender3d.org/cms/Armature_Envelopes.647.0.html Note: todo still is allowing both Vertex Deform Groups and these Envelopes together (and or per Bone). Also part of this commit is: - New: Hiding bones in EditMode. This is a separate 'hide flag', so you can keep the PoseMode hidden Bones separate from EditMode. (In the future we should do some kind of bone-grouping or so) - While transform(), the hotkeys G,R,S only switch mode when the previous mode was compatible. Caused conflicts with Crease/BoneDist/etc. - Deleting the last VertexGroup now also deletes the entire Mesh 'dvert' data. Sounds logical, but remember that VertexGroups are partial on a Mesh, partial on Object. Weird design decision though... Anyhoo, at this moment the only way to have Bone Envelopes deform, is by deleting all VertexGroups! - In PoseMode, the hotkey ALT+S now does both B-Bone size or Envelope, depending draw type. - In EditMode, Extrude now also works when only Root points were selected. - Weight editing is also symmetrical btw, with the "X-axis Mirror" option set.
2005-08-19 12:35:15 +00:00
if(G.obedit->type==OB_ARMATURE) {
bArmature *arm= G.obedit->data;
if(arm->drawtype==ARM_ENVELOPE)
initTransform(TFM_BONE_ENVELOPE, CTX_NONE);
else
initTransform(TFM_RESIZE, CTX_NONE);
}
else
initTransform(TFM_RESIZE, CTX_NONE);
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
Transform();
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
}
Added curly braces around an #ifdef NEWTRANSFORM. Needed when NEWTRANSFORM was not defined.
2005-03-19 13:26:03 +00:00
else if(G.qual==(LR_SHIFTKEY|LR_CTRLKEY)){
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
initTransform(TFM_TOSPHERE, CTX_NONE);
Transform();
Added curly braces around an #ifdef NEWTRANSFORM. Needed when NEWTRANSFORM was not defined.
2005-03-19 13:26:03 +00:00
}
With the royal blessing of guitarGeek, I commit the sharp/flat mesh editmode selection tools. The documentation can (currently) be found here: http://mediawiki.blender.org/index.php/Requests/SharpFlatSelect
2005-12-29 23:26:48 +00:00
if ( G.qual == (LR_SHIFTKEY | LR_ALTKEY | LR_CTRLKEY) ) {
if(G.obedit->type==OB_MESH) select_sharp_edges();
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
else if(G.qual==LR_ALTKEY) {
Armature "Envelope" editing. For defining the deformation distances of Bones, three values are being used now. The bone tip and root radius define the bone-shape itself and the "dist" defines the soft area around it. A full (user) doc is in CMS here; http://www.blender3d.org/cms/Armature_Envelopes.647.0.html Note: todo still is allowing both Vertex Deform Groups and these Envelopes together (and or per Bone). Also part of this commit is: - New: Hiding bones in EditMode. This is a separate 'hide flag', so you can keep the PoseMode hidden Bones separate from EditMode. (In the future we should do some kind of bone-grouping or so) - While transform(), the hotkeys G,R,S only switch mode when the previous mode was compatible. Caused conflicts with Crease/BoneDist/etc. - Deleting the last VertexGroup now also deletes the entire Mesh 'dvert' data. Sounds logical, but remember that VertexGroups are partial on a Mesh, partial on Object. Weird design decision though... Anyhoo, at this moment the only way to have Bone Envelopes deform, is by deleting all VertexGroups! - In PoseMode, the hotkey ALT+S now does both B-Bone size or Envelope, depending draw type. - In EditMode, Extrude now also works when only Root points were selected. - Weight editing is also symmetrical btw, with the "X-axis Mirror" option set.
2005-08-19 12:35:15 +00:00
if(G.f & G_WEIGHTPAINT)
ob= ob->parent;
if(ob && (ob->flag & OB_POSEMODE)) {
bArmature *arm= ob->data;
if( ELEM(arm->drawtype, ARM_B_BONE, ARM_ENVELOPE)) {
initTransform(TFM_BONESIZE, CTX_NONE);
Transform();
break;
}
}
Last minute patch from Chris Want Nkey "Properties Panel" now has Dimension ("Dim") buttons too. This reads from the actual bounding box value to see the size. Note that dimensions for animated & deformed objects will change per frame. (Cleaned up buttons layout for patch, and added support for Curve, Text and Surface objects)
2006-06-12 20:01:18 +00:00
if(okee("Clear scale")) {
Initial new transform commit. Disabled behind defines. Uncomment //#define NEWTRANSFORM in transform.h to enable. Use at your own risk For more info, see Wiki: http://wiki.blender.org/bin/view.pl/Blenderdev/TransformRefactoring And tuhopuu mailing list: http://projects.blender.org/pipermail/tuhopuu-devel/ Notes for Ton (things that could need bulldozing: - TransData conversions. Objects is ok, but others could be rechecked. (some still use totsel). Need to add pose mode support. - Need more icons in the PET mode dropdown (in the 3D view header) for the new modes - Add new transform calls to Toolbox and Menus and the one right after Extrude. That's pretty much all I can think of now.
2005-02-14 02:53:36 +00:00
clear_object('s');
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
Initial new transform commit. Disabled behind defines. Uncomment //#define NEWTRANSFORM in transform.h to enable. Use at your own risk For more info, see Wiki: http://wiki.blender.org/bin/view.pl/Blenderdev/TransformRefactoring And tuhopuu mailing list: http://projects.blender.org/pipermail/tuhopuu-devel/ Notes for Ton (things that could need bulldozing: - TransData conversions. Objects is ok, but others could be rechecked. (some still use totsel). Need to add pose mode support. - Need more icons in the PET mode dropdown (in the 3D view header) for the new modes - Add new transform calls to Toolbox and Menus and the one right after Extrude. That's pretty much all I can think of now.
2005-02-14 02:53:36 +00:00
else if(G.qual==LR_SHIFTKEY) {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
snapmenu();
Initial new transform commit. Disabled behind defines. Uncomment //#define NEWTRANSFORM in transform.h to enable. Use at your own risk For more info, see Wiki: http://wiki.blender.org/bin/view.pl/Blenderdev/TransformRefactoring And tuhopuu mailing list: http://projects.blender.org/pipermail/tuhopuu-devel/ Notes for Ton (things that could need bulldozing: - TransData conversions. Objects is ok, but others could be rechecked. (some still use totsel). Need to add pose mode support. - Need more icons in the PET mode dropdown (in the 3D view header) for the new modes - Add new transform calls to Toolbox and Menus and the one right after Extrude. That's pretty much all I can think of now.
2005-02-14 02:53:36 +00:00
}
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
else if((G.qual==0)) {
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
initTransform(TFM_RESIZE, CTX_NONE);
Transform();
}
else if(G.qual==(LR_SHIFTKEY|LR_CTRLKEY)) {
initTransform(TFM_TOSPHERE, CTX_NONE);
Transform();
}
Fix for bug #2766: Shear shortcut broken The problem is that the shear shortcut that was originally chosen was eaten up by the shortcut to switch to the scale blezmo. Changed the shortcut to CTRL + ALT + SHIFT + S which is painful but seeing as how shear in object mode has limited use, I don't think it will cause any real problems. I also updated the menu entry to match. This was assigned to Martin but he's busy so I did it... and if I did it wrong... blame him for not fixing it sooner ;)
2005-07-22 03:25:29 +00:00
else if(G.qual==(LR_CTRLKEY|LR_ALTKEY|LR_SHIFTKEY)) {
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
initTransform(TFM_SHEAR, CTX_NONE);
Transform();
Transform widgets; Scale and Rotate versions To use; press the (temporal) icon in header. Switching widget types is by pressing G, R or S once, if current widget type is different it switches, otherwise it goes to normal Transform(). Widgets need a bit test for picking accuracy, correct drawing etc. The rotate widget has a center button for 'trackball' rotate. That latter can also be used for hotkey-based rotate. In current code, all widgets remain in "Global" space, also in editmode. Also widget updates while using normal transform has to be done. 2 Bugfixes: - rotate in PoseMode had error for 2d 'around' center - transform in postemode could crash, due to typo (& or |)
2005-03-19 12:17:06 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
case TKEY:
Missing feature: Snap menu was not available in editmode. Fixed compiler warning about ambiguous else in TKEY block.
2003-10-28 07:15:02 +00:00
if(G.obedit){
- New feature: shift+ctrl+t in Mesh editmode splits quads in exact opposite way. Requested for low-poly modeling. - fix: on exit editmode, the code always created a mesh->dvert block... silly, this made other code confused which decided whether to use dverts (vertex groups) or not. - removed obsolete call from armature.c. Also fixed name of function there, preparation work for nicer support in Blender for "deform envelopes"
2005-08-17 13:26:42 +00:00
if((G.qual & LR_CTRLKEY) && G.obedit->type==OB_MESH) {
convert_to_triface(G.qual & LR_SHIFTKEY);
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
allqueue(REDRAWVIEW3D, 0);
countall();
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
DAG_object_flush_update(G.scene, G.obedit, OB_RECALC_DATA);
Initial revision
2002-10-12 11:37:38 +00:00
}
Fixed constraint center calculation. Much smarter to do it when calculating transformation center... Fixed Extrude constraint. Needed to premul the normal by the object's matrix to but it in global space. Also, moved the Locking Axis modifier (for constraints) from Alt to Shift. Alt was conflicting with middle mouse button emulation (reported in the test builds forum). Tilt Transformation.
2005-03-16 21:55:57 +00:00
if (G.obedit->type==OB_CURVE) {
if (G.qual==LR_ALTKEY) {
clear_tilt();
}
else if (G.qual==0) {
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
initTransform(TFM_TILT, CTX_NONE);
Transform();
Fixed constraint center calculation. Much smarter to do it when calculating transformation center... Fixed Extrude constraint. Needed to premul the normal by the object's matrix to but it in global space. Also, moved the Locking Axis modifier (for constraints) from Alt to Shift. Alt was conflicting with middle mouse button emulation (reported in the test builds forum). Tilt Transformation.
2005-03-16 21:55:57 +00:00
}
}
Missing feature: Snap menu was not available in editmode. Fixed compiler warning about ambiguous else in TKEY block.
2003-10-28 07:15:02 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_CTRLKEY) {
Small fixes; - "make track" in posemode only worked for objects, so disabled it for now - in weightpaint, "Clear rotation/location" worked on armature-pose, as well as on object. Was confusing... disabled clearing object in weightpaint.
2005-09-12 15:17:35 +00:00
if(ob && (ob->flag & OB_POSEMODE));
else make_track();
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_ALTKEY) {
Small fixes; - "make track" in posemode only worked for objects, so disabled it for now - in weightpaint, "Clear rotation/location" worked on armature-pose, as well as on object. Was confusing... disabled clearing object in weightpaint.
2005-09-12 15:17:35 +00:00
if(ob && (ob->flag & OB_POSEMODE));
else clear_track();
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.qual==0)){
texspace_edit();
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case UKEY:
if(G.obedit) {
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
if(G.obedit->type==OB_MESH) {
if(G.qual==0) BIF_undo(); else BIF_redo();
Editmesh Undo: User Info: Pressing UKey in mesh edit mode now undoes only last step. Undo can save upto 64 steps of undo info. This is configurable under User Prefs-> Edit Methods. The default is 32. High numbers of undo steps use a lot of memory, since each step stores a copy of the mesh. Shift-U redoes the last undone step (Undoes the undo.) Alt-U brings up a menu of possible steps that can be undone. Selecting an item on the list undoes that item plus all items before it on the list. The top selection "Undo All" is identical to the old Ukey. It undoes all editing since entering Editmode, even if all regular undo steps are used up. Undo info is only saved for one object at a time. You can leave and re- enter editmode for the same object, and all undo steps for that object are preserved. Undo info for an object is lost once a different object is edited. Coder Info: In order for undo to work, a checkpoint save has to be made. This is done with a call to undo_push_mesh("name of step"). This should be done after the last quick abort for a function (typ. the "if (G.obedit==0) return;", or similar). the undo_push_mesh() does alter some flags, so don't try to be too tricky and call undo_push_mesh() too late. The step name is what shows up in the undo_menu. The name "U" is reserved.
2003-10-19 20:52:34 +00:00
}
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
else if ELEM5(G.obedit->type, OB_CURVE, OB_SURF, OB_MBALL, OB_LATTICE, OB_ARMATURE) {
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
if(G.qual==0) BIF_undo(); else BIF_redo();
Three functionalities in one commit, but there's overlap so I can't separate it... 1) Curve/Surface editmode undo Uses same syntax as mesh undo, so simple to integrate. Edit-curve data is also quite simpler, so no need for any hack at all. It re-uses the undo system from next point, which is nice short & clean local code 2) Framework for global undo The undo calls themselves are commented out. In a next commit I want to enable it for a couple of main features, for further feedback. The speed goes surprisingly well, especially with this new version that 'pushes' undo after a command, ensuring interactivity isnt frustrated 3) framework for texture based icons in Blender Not activated code, but tested here. Part of 2.3 UI project. btw: Johnny Matthews will assist in (and complete) the undo project
2004-08-31 13:43:18 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
Undo for lattice editmode added.
2004-11-07 21:14:21 +00:00
else if((G.qual==0)) {
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
if(G.f & G_WEIGHTPAINT)
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
wpaint_undo();
else if(G.f & G_VERTEXPAINT)
vpaint_undo();
Texturepaint now supports all the imagepaint brush settings, with the exception of the clone tool. One level undo for image- and texturepaint, only storing those tiles that changed. Test to improve texturepaint performance using glTexSubImage2D, only enabled with 2^n sized textures and mipmapping off. Painting a 2048x2048 texture is then pretty smooth here, as long as the geometry is not too complex.
2006-08-27 13:29:00 +00:00
else if(G.f & G_TEXTUREPAINT)
imagepaint_undo();
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
else if (G.f & G_FACESELECT)
uv_autocalc_tface();
The undo test is now safely hidden behind a user-button (temporal) Activate it in User menu "edit methods"
2004-08-31 21:01:21 +00:00
else {
- redo now also ctrl+y. - made undo/redo display of previewrender nice
2004-09-18 18:34:50 +00:00
single_user();
The undo test is now safely hidden behind a user-button (temporal) Activate it in User menu "edit methods"
2004-08-31 21:01:21 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
Enabled trial for 'global undo'. This now only has undo steps for - transform (grab, rot, scale, etc) - all button commands, including menus I sacrificed for now the UKEY in the 3d window for it. Shift+U does a redo. (Only in 3d window) What this system does is saving files in the temp directory (user pref). The filenames are cycled around (32 in total now). This commit will follow shortly with a userpref for it, not to frustrate people who want to work in normal fashion with blender.
2004-08-31 20:13:32 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
break;
case VKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY)) {
if ((G.obedit) && G.obedit->type==OB_MESH) {
Initial revision
2002-10-12 11:37:38 +00:00
align_view_to_selected(v3d);
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
else if (G.f & G_FACESELECT) {
Initial revision
2002-10-12 11:37:38 +00:00
align_view_to_selected(v3d);
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
}
else if(G.qual==LR_ALTKEY)
image_aspect();
else if (G.qual==0){
Initial revision
2002-10-12 11:37:38 +00:00
if(G.obedit) {
New Mesh tool: "Rip". http://www.blender3d.org/cms/Mesh_Ripping.712.0.html This tool allows to insert gaps/seams in a Mesh, based on the selection (1 vertex or a row of edges) and the position of the mouse (to indicate the part that gets grabbed). Shortcut: Vkey. Special Orange request!
2005-10-20 07:47:10 +00:00
if(G.obedit->type==OB_MESH) {
mesh_rip();
}
else if(G.obedit->type==OB_CURVE) {
Initial revision
2002-10-12 11:37:38 +00:00
sethandlesNurb(2);
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
DAG_object_flush_update(G.scene, G.obedit, OB_RECALC_DATA);
Initial revision
2002-10-12 11:37:38 +00:00
allqueue(REDRAWVIEW3D, 0);
EditMesh refactory + undo recode The changelog is very long... it's on the web too: http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html EditMesh refactor notes (user) **** New selection modes When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!). - Vertex Select Select vertices as usual, fully compatible with how previous version work - Edge Select Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected. - Face Select Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges. While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected. For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too. The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well. Most noticeable it's in: **** Extrude Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it. New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual. **** Other things to note - Hiding edges/faces will also behave different based on Select Mode. - while editing, normals of faces are updated always now - Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border. - in face mode, adding vertices, edges or a circle is invisible... - "Add monkey" now works as a normal primitive (rotated and on 3d cursor) - Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups - Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain. **** Todo Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture. EditMesh refactor notes (coder) **** Usage of flags in general The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now. The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them. **** Selection flags EditVert: eve->f & SELECT EditEdge: eed->f & SELECT EditFace: efa->f & SELECT - Selection is only possible when not-hidden! - Selection flags are always up-to-date, BUT: if selection mode >= SELECT_EDGE vertex selection flags can be incorrect if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect This because of shared vertices or edges. - use for selecting vertices: eve->f &= SELECT - use for selecting edges always: void EM_select_edge(eed, 1) // 1 = select, 0 = deselect - use for selecting faces always: void EM_select_face(efa, 1) // 1 = select, 0 = deselect - To set the 'f' flags in all of the data: void EM_set_flag_all(int flag); void EM_clear_flag_all(int flag); - the old faceselectedOR() and faceselectedAND() are still there, but only to be used for evaluating its vertices **** Code hints for handling selection If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore. However, by using the above calls, at least selections flush downward (to vertex level). You then can call: void EM_selectmode_flush(void); Which flushes selections back upward, based on the selectmode setting. This function does the following: - if selectmode 'vertex': select edges/faces based on its selected vertices - if selectmode 'edge': select faces based its selected edges This works fine in nice controlled situations. However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call: void EM_select_flush(void); Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives. **** Hide flags EditVert: eve->h EditEdge: eed->h EditFace: efa->h - all hide flags are always up-to-date - hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag. **** Unified undo for editmode New file: editmode_undo.h A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference. Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions. **** Going in/out editmode As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed. ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
2004-09-23 20:52:51 +00:00
BIF_undo_push("Handle change");
Initial revision
2002-10-12 11:37:38 +00:00
}
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(ob && ob->type == OB_MESH)
set_vpaint();
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case WKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY)) {
Found some time do sanitize the big Transform call: - Splited off the event treatment into a fonction of its own - Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too) Calling transform now works like this: initTransform(mode, context) - possible post init calls, constraints mostly Transform() - eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead. - Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM - Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
2005-05-10 04:21:11 +00:00
initTransform(TFM_WARP, CTX_NONE);
Transform();
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_ALTKEY) {
Initial revision
2002-10-12 11:37:38 +00:00
/* if(G.obedit && G.obedit->type==OB_MESH) write_videoscape(); */
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if(G.qual==LR_CTRLKEY) {
Initial revision
2002-10-12 11:37:38 +00:00
if(G.obedit) {
if ELEM(G.obedit->type, OB_CURVE, OB_SURF) {
switchdirectionNurb2();
}
}
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.qual==0))
special_editmenu();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case XKEY:
case DELKEY:
Added global delete, triggered with Shift+Del, this removes the object from all scenes (saves searching manually)
2006-10-11 06:51:26 +00:00
if(G.qual==0 || G.qual==LR_SHIFTKEY)
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
delete_context_selected();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case YKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0) && (G.obedit)) {
Initial revision
2002-10-12 11:37:38 +00:00
if(G.obedit->type==OB_MESH) split_mesh();
}
break;
case ZKEY:
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
toggle_shading();
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_headredraw(curarea);
scrarea_queue_winredraw(curarea);
break;
case HOMEKEY:
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
if(G.qual==0)
view3d_home(0);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case COMMAKEY:
Ported from tuhopuu2: * Added hotkeys Ctrl , (comma) to select 'median point' pivot and Ctrl . (period) to select 'individual object centers' pivot.
2004-01-07 12:59:42 +00:00
if(G.qual==LR_CTRLKEY) {
G.vd->around= V3D_CENTROID;
This adds two modes to the 'around' drop down in 3d header 3d Cursor, only Ob Centers Median Point, only Ob Centers They prevent rotation/scaling from effecting the scale/rotation of the objects and just effects their position. This is handy for aligning objects if you constrain to an axis and scale, as well as other neato things :) Intrr came up with the code and I hacked it into the GUI
2004-07-15 17:42:04 +00:00
} else if(G.qual==LR_SHIFTKEY) {
G.vd->around= V3D_CENTROID;
Ported from tuhopuu2: * Added hotkeys Ctrl , (comma) to select 'median point' pivot and Ctrl . (period) to select 'individual object centers' pivot.
2004-01-07 12:59:42 +00:00
} else if(G.qual==0) {
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
G.vd->around= V3D_CENTRE;
}
Bug 2057 Hotkeys comma and dot (around cursor, median) didn't work for user option "global pivot". Now all 3d windows are set correctly.
2005-02-12 12:06:30 +00:00
handle_view3d_around();
Ported from tuhopuu2: * Added hotkeys Ctrl , (comma) to select 'median point' pivot and Ctrl . (period) to select 'individual object centers' pivot.
2004-01-07 12:59:42 +00:00
scrarea_queue_headredraw(curarea);
Animated UI for TimeLine "Play" Using the Play button in timeline, now uses an event-driven system to update the animation system and signal windows to redraw. Meaning the full UI remains responsive! Check the new Pulldown "Playback" to set which windows you like to see updated. Same settings is used for LMB 'dragging' frames in Timeline. Implementation notes; - the Icon for 'Pause' (or stop) has to be made yet, I commit this from my laptop... all was coded during a 2 x 5 hour train ride to germany - the anim playback system (ALT+A too) now uses correct "frames per second" as maximum speed. Buttons can be found in 3 places in the UI, also added it as pulldown item - The system works with 'screen handlers', which has been coded with using Python (networked) events or verse in mind too. A doc on that will follow. - the buttons code has been made 'resistant' to animated UIs too, preventing flashing of hilites. - All subloops (like transform) stop playback, with exception of MMB view manipulations. As extra; found tweak to make Textured AA fonts draw without distortion. Looks perfect here on laptop now (like Pixmap fonts) and is 20x faster.
2005-05-11 20:01:42 +00:00
scrarea_queue_winredraw(curarea);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case PERIODKEY:
Ported from tuhopuu2: * Added hotkeys Ctrl , (comma) to select 'median point' pivot and Ctrl . (period) to select 'individual object centers' pivot.
2004-01-07 12:59:42 +00:00
if(G.qual==LR_CTRLKEY) {
G.vd->around= V3D_LOCAL;
This adds two modes to the 'around' drop down in 3d header 3d Cursor, only Ob Centers Median Point, only Ob Centers They prevent rotation/scaling from effecting the scale/rotation of the objects and just effects their position. This is handy for aligning objects if you constrain to an axis and scale, as well as other neato things :) Intrr came up with the code and I hacked it into the GUI
2004-07-15 17:42:04 +00:00
} else if(G.qual==0) {
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
G.vd->around= V3D_CURSOR;
}
Bug 2057 Hotkeys comma and dot (around cursor, median) didn't work for user option "global pivot". Now all 3d windows are set correctly.
2005-02-12 12:06:30 +00:00
handle_view3d_around();
Ported from tuhopuu2: * Added hotkeys Ctrl , (comma) to select 'median point' pivot and Ctrl . (period) to select 'individual object centers' pivot.
2004-01-07 12:59:42 +00:00
scrarea_queue_headredraw(curarea);
Animated UI for TimeLine "Play" Using the Play button in timeline, now uses an event-driven system to update the animation system and signal windows to redraw. Meaning the full UI remains responsive! Check the new Pulldown "Playback" to set which windows you like to see updated. Same settings is used for LMB 'dragging' frames in Timeline. Implementation notes; - the Icon for 'Pause' (or stop) has to be made yet, I commit this from my laptop... all was coded during a 2 x 5 hour train ride to germany - the anim playback system (ALT+A too) now uses correct "frames per second" as maximum speed. Buttons can be found in 3 places in the UI, also added it as pulldown item - The system works with 'screen handlers', which has been coded with using Python (networked) events or verse in mind too. A doc on that will follow. - the buttons code has been made 'resistant' to animated UIs too, preventing flashing of hilites. - All subloops (like transform) stop playback, with exception of MMB view manipulations. As extra; found tweak to make Textured AA fonts draw without distortion. Looks perfect here on laptop now (like Pixmap fonts) and is 20x faster.
2005-05-11 20:01:42 +00:00
scrarea_queue_winredraw(curarea);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case PADSLASHKEY:
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
if(G.qual==0) {
if(G.vd->localview) {
G.vd->localview= 0;
endlocalview(curarea);
}
else {
G.vd->localview= 1;
initlocalview();
}
scrarea_queue_headredraw(curarea);
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case PADASTERKEY: /* '*' */
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
if(G.qual==0) {
if(ob) {
The "teac" (measurement info) patch from Campbell Barton Cleaned code somewhat (half the size!) and applied some changes: - made it compatible with selection flags for new mesh editing (edge/face) - renamed 'face angles' to 'edge angles' and made it display angles for 2 selected edges too - removed the confusing convention that always drawed the info if one of the vertices of edge/face/angle was selected. now it only displays on minimum of 1 full edge or face selected. - made it react to "zbuf occluded selection" option (for zbuffered text) - made it also colorize text for white theme color (TH_TEXT) On larger meshes this info still draws very confusing. The idea of displaying the info on 1 vertex selected was probably to show values while grabbing, although that didnt really work for angles. One idea could be, for transform, that it draws all lenghts/angles/areas that get changed during transform All in all, still useful addition tho!
2005-01-08 21:16:24 +00:00
if ((G.obedit) && (G.obedit->type == OB_MESH)) {
editmesh_align_view_to_selected(G.vd, 2);
}
else if (G.f & G_FACESELECT) {
if(ob->type==OB_MESH) {
Mesh *me= ob->data;
faceselect_align_view_to_selected(G.vd, me, 2);
}
}
else
obmat_to_viewmat(ob);
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
if(G.vd->persp==2) G.vd->persp= 1;
scrarea_queue_winredraw(curarea);
}
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case PADPERIOD: /* '.' */
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
if(G.qual==0)
centreview();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case PAGEUPKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY)
movekey_obipo(1);
else if((G.qual==0))
nextkey_obipo(1); /* in editipo.c */
Initial revision
2002-10-12 11:37:38 +00:00
break;
case PAGEDOWNKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY)
movekey_obipo(-1);
else if((G.qual==0))
nextkey_obipo(-1);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case PAD0: case PAD1: case PAD2: case PAD3: case PAD4:
case PAD5: case PAD6: case PAD7: case PAD8: case PAD9:
Three new selection techniques in mesh edit mode, two of which are controversial: * "Select non-manifold geometry" via ctrl-alt-shift-M, or through the menu or toolbox. Great for troubleshooting weirdness on a subsurf, or for preparing a mesh for decimation or for rapid prototyping. * "Select more" via ctrl-PADPLUS, or through the menu or toolbox. If a selected vert shares an edge with an unselected vert, the unselected one gets selected too. Similar to PADPLUS in wings3d. This is controversial because maybe it would be more useful to select all of the verts that share a face (instead of just an edge) with a selected vert -- what do *you* think? * "Select less" via ctrl-PADMINUS, or through the menu or toolbox. If a selected vert shares an edge with an unselected vert, the selected one gets unselected too. Similar to PADMINUS in wings3d. Also, selected non-manifold geometry becomes unselected. This is controversial because of the non-manifold stuff ... is it needed? What do *you* think?
2004-01-03 06:01:16 +00:00
case PADENTER:
Initial revision
2002-10-12 11:37:38 +00:00
persptoetsen(event);
doredraw= 1;
break;
Three new selection techniques in mesh edit mode, two of which are controversial: * "Select non-manifold geometry" via ctrl-alt-shift-M, or through the menu or toolbox. Great for troubleshooting weirdness on a subsurf, or for preparing a mesh for decimation or for rapid prototyping. * "Select more" via ctrl-PADPLUS, or through the menu or toolbox. If a selected vert shares an edge with an unselected vert, the unselected one gets selected too. Similar to PADPLUS in wings3d. This is controversial because maybe it would be more useful to select all of the verts that share a face (instead of just an edge) with a selected vert -- what do *you* think? * "Select less" via ctrl-PADMINUS, or through the menu or toolbox. If a selected vert shares an edge with an unselected vert, the selected one gets unselected too. Similar to PADMINUS in wings3d. Also, selected non-manifold geometry becomes unselected. This is controversial because of the non-manifold stuff ... is it needed? What do *you* think?
2004-01-03 06:01:16 +00:00
case PADMINUS:
if ( (G.qual==LR_CTRLKEY)
&& (G.obedit) && (G.obedit->type==OB_MESH) )
select_less();
else {
persptoetsen(event);
doredraw= 1;
}
break;
case PADPLUSKEY:
if ( (G.qual==LR_CTRLKEY)
&& (G.obedit) && (G.obedit->type==OB_MESH) )
select_more();
else {
persptoetsen(event);
doredraw= 1;
}
break;
Initial revision
2002-10-12 11:37:38 +00:00
case ESCKEY:
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
if(G.qual==0) {
if (G.vd->flag & V3D_DISPIMAGE) {
G.vd->flag &= ~V3D_DISPIMAGE;
doredraw= 1;
}
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
}
}
}
if(doredraw) {
scrarea_queue_winredraw(curarea);
scrarea_queue_headredraw(curarea);
}
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void initview3d(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
View3D *vd;
vd= MEM_callocN(sizeof(View3D), "initview3d");
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
BLI_addhead(&sa->spacedata, vd); /* addhead! not addtail */
Initial revision
2002-10-12 11:37:38 +00:00
vd->spacetype= SPACE_VIEW3D;
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
vd->blockscale= 0.7f;
vd->viewquat[0]= 1.0f;
vd->viewquat[1]= vd->viewquat[2]= vd->viewquat[3]= 0.0f;
Initial revision
2002-10-12 11:37:38 +00:00
vd->persp= 1;
vd->drawtype= OB_WIRE;
vd->view= 7;
vd->dist= 10.0;
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
vd->lens= 35.0f;
vd->near= 0.01f;
vd->far= 500.0f;
vd->grid= 1.0f;
Initial revision
2002-10-12 11:37:38 +00:00
vd->gridlines= 16;
vd->lay= vd->layact= 1;
if(G.scene) {
vd->lay= vd->layact= G.scene->lay;
vd->camera= G.scene->camera;
}
vd->scenelock= 1;
* Preferences for displaying the grid floor, X axis, Y axis, Z axis. (ported from tuhopuu2) Controls are found in the 3D View Properties panel (with the rest of the grid settings). This is more flexible for people like me who hate the grid getting in the way when modelling - turning off the grid floor and turning on the Z axis gives a setup like in Wings 3D or Clay. * Cleaned up the 3D View Properties and Background Image panel's layout while I was adding the new buttons (including change over to UiDefButBit).
2004-01-24 05:06:12 +00:00
vd->gridflag |= V3D_SHOW_X;
vd->gridflag |= V3D_SHOW_Y;
vd->gridflag |= V3D_SHOW_FLOOR;
vd->gridflag &= ~V3D_SHOW_Z;
Initial revision
2002-10-12 11:37:38 +00:00
}
/* ******************** SPACE: IPO ********************** */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
static void changeview2dspace(ScrArea *sa, void *spacedata)
Initial revision
2002-10-12 11:37:38 +00:00
{
if(G.v2d==0) return;
test_view2d(G.v2d, curarea->winx, curarea->winy);
myortho2(G.v2d->cur.xmin, G.v2d->cur.xmax, G.v2d->cur.ymin, G.v2d->cur.ymax);
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void winqreadipospace(ScrArea *sa, void *spacedata, BWinEvent *evt)
Initial revision
2002-10-12 11:37:38 +00:00
{
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
extern void do_ipobuts(unsigned short event); /* drawipo.c */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
unsigned short event= evt->event;
short val= evt->val;
Initial revision
2002-10-12 11:37:38 +00:00
SpaceIpo *sipo= curarea->spacedata.first;
View2D *v2d= &sipo->v2d;
float dx, dy;
int cfra, doredraw= 0;
short mval[2];
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
short mousebut = L_MOUSE;
Initial revision
2002-10-12 11:37:38 +00:00
Fixing loose ends: - nkey menu for buttonswindow (hex values) couldnt be restored yet, is for next release - replaced Nkey in IpoWindow with Panel, this now displays the buttons that were formerly in 'anim buttons' as well; to view the boundbox values of all visible curves, and adjust it. - the new panel also has the 'set speed' option, fixed stuff in it and added better errorwarning... still not a very well coded tool!
2003-10-28 14:20:03 +00:00
if(sa->win==0) return;
Initial revision
2002-10-12 11:37:38 +00:00
if(val) {
Fixing loose ends: - nkey menu for buttonswindow (hex values) couldnt be restored yet, is for next release - replaced Nkey in IpoWindow with Panel, this now displays the buttons that were formerly in 'anim buttons' as well; to view the boundbox values of all visible curves, and adjust it. - the new panel also has the 'set speed' option, fixed stuff in it and added better errorwarning... still not a very well coded tool!
2003-10-28 14:20:03 +00:00
if( uiDoBlocks(&sa->uiblocks, event)!=UI_NOTHING ) event= 0;
Initial revision
2002-10-12 11:37:38 +00:00
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
/* swap mouse buttons based on user preference */
if (U.flag & USER_LMOUSESELECT) {
Bug fix #1893 Option to switch left/right mouse didn't work for floating panels. It then still selected stuff behind the button. Was due to using wrong variable for events.
2004-11-26 20:20:42 +00:00
if (event == LEFTMOUSE) {
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
event = RIGHTMOUSE;
mousebut = L_MOUSE;
Bug fix #1893 Option to switch left/right mouse didn't work for floating panels. It then still selected stuff behind the button. Was due to using wrong variable for events.
2004-11-26 20:20:42 +00:00
} else if (event == RIGHTMOUSE) {
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
event = LEFTMOUSE;
mousebut = R_MOUSE;
}
}
Initial revision
2002-10-12 11:37:38 +00:00
switch(event) {
case UI_BUT_EVENT:
Fixing loose ends: - nkey menu for buttonswindow (hex values) couldnt be restored yet, is for next release - replaced Nkey in IpoWindow with Panel, this now displays the buttons that were formerly in 'anim buttons' as well; to view the boundbox values of all visible curves, and adjust it. - the new panel also has the 'set speed' option, fixed stuff in it and added better errorwarning... still not a very well coded tool!
2003-10-28 14:20:03 +00:00
/* note: bad bad code, will be cleaned! is because event queues are all shattered */
Plumiferos fix; having more than 64 Shape Keys didn't allow the channels in IpoWindow to select.
2006-05-24 17:15:26 +00:00
if(val>0 && val < 256) do_ipowin_buts(val-1);
Fixing loose ends: - nkey menu for buttonswindow (hex values) couldnt be restored yet, is for next release - replaced Nkey in IpoWindow with Panel, this now displays the buttons that were formerly in 'anim buttons' as well; to view the boundbox values of all visible curves, and adjust it. - the new panel also has the 'set speed' option, fixed stuff in it and added better errorwarning... still not a very well coded tool!
2003-10-28 14:20:03 +00:00
else do_ipobuts(val);
Initial revision
2002-10-12 11:37:38 +00:00
break;
Fixing loose ends: - nkey menu for buttonswindow (hex values) couldnt be restored yet, is for next release - replaced Nkey in IpoWindow with Panel, this now displays the buttons that were formerly in 'anim buttons' as well; to view the boundbox values of all visible curves, and adjust it. - the new panel also has the 'set speed' option, fixed stuff in it and added better errorwarning... still not a very well coded tool!
2003-10-28 14:20:03 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
case LEFTMOUSE:
if( in_ipo_buttons() ) {
do_ipo_selectbuttons();
doredraw= 1;
- Two fixes: 1) Sound window displays 'frs/sec' value correct now (found a 25 hardcoded) 2) LeftMouse click in sliders of IpoWind, NLA, Action allows to make sliders smaller/larger, for quick zoom. Used to work but disappeared in early this decade or so :)
2004-10-29 17:21:28 +00:00
}
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
else if(view2dmove(LEFTMOUSE)); /* only checks for sliders */
Initial revision
2002-10-12 11:37:38 +00:00
else if(G.qual & LR_CTRLKEY) add_vert_ipo();
else {
do {
getmouseco_areawin(mval);
areamouseco_to_ipoco(v2d, mval, &dx, &dy);
cfra= (int)dx;
if(cfra< 1) cfra= 1;
if( cfra!=CFRA ) {
CFRA= cfra;
Enabled Audio scrubbing in LMB dragging in IpoWindow and TimeLine.
2006-07-05 11:59:00 +00:00
update_for_newframe_nodraw(0); /* 1 = nosound */
Tweaked the force_draw() calls, to allow headerprint() to work while doing a transform. Solves bug reported by Brecht about this.
2004-11-07 18:20:44 +00:00
force_draw_all(0); /* To make constraint sliders redraw */
Initial revision
2002-10-12 11:37:38 +00:00
}
Bug fix, after irc report sk1p: frame-sliding (LMB) in action, nla, sound and ipo window went into very tight while loop, causing cpu to choke. Added nice idle. Bug fix, found self while testing: - relative.blend, editmode - delete part, exit editmode - enter editmode, undo twice, exit editmode -> crash The trick to copy 'old' locations of vertices to keys isnt undo-resistant yet. This fix at least doesnt crash, but copying doesnt work when undo-ing back to previous editmode session (indices just differ from current mesh...)
2004-12-12 21:13:07 +00:00
else PIL_sleep_ms(30);
Initial revision
2002-10-12 11:37:38 +00:00
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
} while(get_mbut() & mousebut);
Initial revision
2002-10-12 11:37:38 +00:00
}
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
break;
case RIGHTMOUSE:
mouse_select_ipo();
allqueue (REDRAWACTION, 0);
allqueue(REDRAWNLA, 0);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case MIDDLEMOUSE:
if(in_ipo_buttons()) {
scroll_ipobuts();
}
added mousewheel support part 3
2003-01-28 12:14:47 +00:00
else view2dmove(event); /* in drawipo.c */
Initial revision
2002-10-12 11:37:38 +00:00
break;
added mousewheel support part 2
2003-01-28 11:14:38 +00:00
case WHEELUPMOUSE:
case WHEELDOWNMOUSE:
view2dmove(event); /* in drawipo.c */
break;
Initial revision
2002-10-12 11:37:38 +00:00
case PADPLUSKEY:
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
view2d_zoom(v2d, 0.1154f, sa->winx, sa->winy);
Initial revision
2002-10-12 11:37:38 +00:00
doredraw= 1;
break;
case PADMINUS:
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
view2d_zoom(v2d, -0.15f, sa->winx, sa->winy);
Initial revision
2002-10-12 11:37:38 +00:00
doredraw= 1;
break;
case PAGEUPKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY)
movekey_ipo(1);
else if((G.qual==0))
nextkey_ipo(1);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case PAGEDOWNKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY)
movekey_ipo(-1);
else if((G.qual==0))
nextkey_ipo(-1);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case HOMEKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
do_ipo_buttons(B_IPOHOME);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case AKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0)) {
if(in_ipo_buttons()) {
swap_visible_editipo();
}
Bug fix #2375 Akey in ipowindow didn't deselect anymore. Or worse... each main refresh in ipowindow selected all ipos! Was related to trying to fix mess from jK's commit last year... now its scientifically ok again! :)
2005-03-23 16:55:22 +00:00
else {
swap_selectall_editipo();
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
allspace (REMAKEIPO, 0);
allqueue (REDRAWNLA, 0);
allqueue (REDRAWACTION, 0);
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case BKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
borderselect_ipo();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case CKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
move_to_frame();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case DKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY))
add_duplicate_editipo();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case GKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
transform_ipo('g');
Initial revision
2002-10-12 11:37:38 +00:00
break;
case HKEY:
For long on the wanna-have list; Ipocurves with "Auto" handles now have option to remain horizontal on the extrema (tops & valleys). Use ALT+H to set this per selected curve. Note this is a per-curve feature, not per-handle. If it works satisfying I can check on making this the default new added curve.
2005-07-10 12:50:14 +00:00
if(G.qual==LR_ALTKEY)
Autohandles in Ipo Window still could overshoot. Added a new clamping to ensure the handles never result in a curve that goes beyond the neighbour control points. http://www.blender.org/cms/Animation_Curve_Handle.717.0.html
2005-10-23 21:36:24 +00:00
sethandles_ipo(HD_AUTO_ANIM);
For long on the wanna-have list; Ipocurves with "Auto" handles now have option to remain horizontal on the extrema (tops & valleys). Use ALT+H to set this per selected curve. Note this is a per-curve feature, not per-handle. If it works satisfying I can check on making this the default new added curve.
2005-07-10 12:50:14 +00:00
if(G.qual==LR_SHIFTKEY)
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
sethandles_ipo(HD_AUTO);
For long on the wanna-have list; Ipocurves with "Auto" handles now have option to remain horizontal on the extrema (tops & valleys). Use ALT+H to set this per selected curve. Note this is a per-curve feature, not per-handle. If it works satisfying I can check on making this the default new added curve.
2005-07-10 12:50:14 +00:00
else if(G.qual==0)
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
sethandles_ipo(HD_ALIGN);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case JKEY:
Bug #4959 Ipo Window: hotkey for "Join" should be Cltr+J, no J.
2006-09-04 12:48:25 +00:00
if((G.qual==LR_CTRLKEY))
* Big menus update Hard to describe other than by saying: * Updates, re-thought organisation, etc based on testing and feedback from 2.30 -> 2.31 * A *lot* of missing entries added * Toolbox expanded, tidied and more consistent with pulldown menus * A lot of functionality hidden behind secondary pupmenu()s is now exposed through arguments, so that they can be more easily explored from the pulldowns and toolbox. This is the reason for the many changed files in this commit - had to clean up editing functions. Mixing interface code in the middle of editing functionality is not good for menus and toolboxes. Please don't do it! At this stage, the menu and toolbox system (at least for most window spaces) should be just about 'stable' and 'complete'. It's now up to people to keep them up to date :)
2004-01-12 13:30:00 +00:00
join_ipo_menu();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case KKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0)) {
ipo_toggle_showkey();
scrarea_queue_headredraw(curarea);
allqueue(REDRAWVIEW3D, 0);
doredraw= 1;
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
Patch: [ #5036 ] IPO Curve Mirroring by Joshua Leung (aligorith) This patch adds the feature of IPO curve mirroring. It mirrors the selected keyframes in the active ipo curves over a user-nominated mirror-line. Options are: - Mirror over current frame - Mirror over vertical axis (X = 0) - Mirror over horizontal axis (Y = 0) Functionality can be accessed from: - Hotkey M in IPO editor - Submenu in header of IPO editor
2006-10-01 19:45:37 +00:00
case MKEY:
if((G.qual==0))
ipo_mirror_menu();
break;
Fixing loose ends: - nkey menu for buttonswindow (hex values) couldnt be restored yet, is for next release - replaced Nkey in IpoWindow with Panel, this now displays the buttons that were formerly in 'anim buttons' as well; to view the boundbox values of all visible curves, and adjust it. - the new panel also has the 'set speed' option, fixed stuff in it and added better errorwarning... still not a very well coded tool!
2003-10-28 14:20:03 +00:00
case NKEY:
Popular request: the floating panels (NKEY) now close on a 2nd NKEY command. This for all current NKEY menus by default. Can be standard for each hotkey controlled Panel from now on; use toggle_blockhandler() for it. Another popular request: hotkey enabled Panels now optionally reopen on the previous location, instead of under mouse. This option "Pinned" is a user option now. Optional for later; have it as per-panel option... dunno! The last request, close on mouse-exit, won't be implemented, this intrudes with Panel consistancy, and is pretty OK solved with NKEY-NKEY now.
2004-06-19 12:25:28 +00:00
toggle_blockhandler(sa, IPO_HANDLER_PROPERTIES, UI_PNL_TO_MOUSE);
Fixing loose ends: - nkey menu for buttonswindow (hex values) couldnt be restored yet, is for next release - replaced Nkey in IpoWindow with Panel, this now displays the buttons that were formerly in 'anim buttons' as well; to view the boundbox values of all visible curves, and adjust it. - the new panel also has the 'set speed' option, fixed stuff in it and added better errorwarning... still not a very well coded tool!
2003-10-28 14:20:03 +00:00
doredraw= 1;
break;
Initial revision
2002-10-12 11:37:38 +00:00
case RKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
ipo_record();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case SKEY:
* Big menus update Hard to describe other than by saying: * Updates, re-thought organisation, etc based on testing and feedback from 2.30 -> 2.31 * A *lot* of missing entries added * Toolbox expanded, tidied and more consistent with pulldown menus * A lot of functionality hidden behind secondary pupmenu()s is now exposed through arguments, so that they can be more easily explored from the pulldowns and toolbox. This is the reason for the many changed files in this commit - had to clean up editing functions. Mixing interface code in the middle of editing functionality is not good for menus and toolboxes. Please don't do it! At this stage, the menu and toolbox system (at least for most window spaces) should be just about 'stable' and 'complete'. It's now up to people to keep them up to date :)
2004-01-12 13:30:00 +00:00
if((G.qual==LR_SHIFTKEY)) {
ipo_snap_menu();
} else if((G.qual==0))
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
transform_ipo('s');
Initial revision
2002-10-12 11:37:38 +00:00
break;
case TKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
set_ipotype();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case VKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
sethandles_ipo(HD_VECT);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case XKEY:
case DELKEY:
Cleanup and new features for vertex keys. User doc: http://www.blender3d.org/cms/Shape_Keys.678.0.html - The mixed use of "Vertex Key","Key" or "RVK" in Blender was a bit confusing. Also a 'vertex key' assumes keys per vertex, which actually is only a single key for the entire shape. The discussions on blender.org forums all mentioned "Shape" or "Blend Shapes", which I think is an OK name for a "Vertex Key" in the UI. :) - Most work was code spaghetti cleanup. Doing shape-keys now nicely goes via the depgraph and DerivedMesh. That then allows to have different shapes per object, with the new "Pin" feature. Objects now define what Shape is shown (ob->shapenr) - Added a Shape Panel in the Edit buttons with the various options - Fixed a lot of issues in the IpoWindow, with drawing the channels. For example, deleting a key-line there caused the entire Relative option to go wrong, same for moving the lines up/down. Changing key-line order now reflects in order of channels. The active Shape is drawn more clear now too. - Noticed it doesnt work yet for curves/lattice. Need modifier advise!
2005-09-26 15:34:21 +00:00
del_ipo();
Initial revision
2002-10-12 11:37:38 +00:00
break;
}
}
Fixing loose ends: - nkey menu for buttonswindow (hex values) couldnt be restored yet, is for next release - replaced Nkey in IpoWindow with Panel, this now displays the buttons that were formerly in 'anim buttons' as well; to view the boundbox values of all visible curves, and adjust it. - the new panel also has the 'set speed' option, fixed stuff in it and added better errorwarning... still not a very well coded tool!
2003-10-28 14:20:03 +00:00
if(doredraw) scrarea_queue_winredraw(sa);
Initial revision
2002-10-12 11:37:38 +00:00
}
void initipo(ScrArea *sa)
{
SpaceIpo *sipo;
sipo= MEM_callocN(sizeof(SpaceIpo), "initipo");
BLI_addhead(&sa->spacedata, sipo);
sipo->spacetype= SPACE_IPO;
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
sipo->blockscale= 0.7f;
- added initializers for scaling button panels in view3d and ipo... this was never done because of file read do_versions() did it! but creating an ipowin where never was one before showed error.
2003-11-30 22:29:54 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
/* sipo space loopt van (0,-?) tot (??,?) */
sipo->v2d.tot.xmin= 0.0;
sipo->v2d.tot.ymin= -10.0;
sipo->v2d.tot.xmax= G.scene->r.efra;
sipo->v2d.tot.ymax= 10.0;
sipo->v2d.cur= sipo->v2d.tot;
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
sipo->v2d.min[0]= 0.01f;
sipo->v2d.min[1]= 0.01f;
Initial revision
2002-10-12 11:37:38 +00:00
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
sipo->v2d.max[0]= 15000.0f;
sipo->v2d.max[1]= 10000.0f;
Initial revision
2002-10-12 11:37:38 +00:00
sipo->v2d.scroll= L_SCROLL+B_SCROLL;
sipo->v2d.keeptot= 0;
sipo->blocktype= ID_OB;
}
/* ******************** SPACE: INFO ********************** */
void space_mipmap_button_function(int event) {
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
set_mipmap(!(U.gameflags & USER_DISABLE_MIPMAP));
Initial revision
2002-10-12 11:37:38 +00:00
allqueue(REDRAWVIEW3D, 0);
}
big warning hunt commit lot of casts, added prototypes, missing includes and some true errors
2005-03-09 19:45:59 +00:00
#if 0
static void space_sound_button_function(int event)
Initial revision
2002-10-12 11:37:38 +00:00
{
int a;
SYS_SystemHandle syshandle;
if ((syshandle = SYS_GetSystem()))
{
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
a = (U.gameflags & USER_DISABLE_SOUND);
Initial revision
2002-10-12 11:37:38 +00:00
SYS_WriteCommandLineInt(syshandle, "noaudio", a);
}
}
big warning hunt commit lot of casts, added prototypes, missing includes and some true errors
2005-03-09 19:45:59 +00:00
#endif
Initial revision
2002-10-12 11:37:38 +00:00
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
/* needed for event; choose new 'curmain' resets it... */
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
static short th_curcol= TH_BACK;
static char *th_curcol_ptr= NULL;
static char th_curcol_arr[4]={0, 0, 0, 255};
big warning hunt commit lot of casts, added prototypes, missing includes and some true errors
2005-03-09 19:45:59 +00:00
static void info_user_themebuts(uiBlock *block, short y1, short y2, short y3)
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
{
bTheme *btheme, *bt;
int spacetype= 0;
static short cur=1, curmain=2;
short a, tot=0, isbuiltin= 0;
Add theme colour for "Draw Normals"
2004-09-06 08:10:56 +00:00
char string[21*32], *strp, *col;
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
y3= y2+23; /* exception! */
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
/* count total, max 16! */
for(bt= U.themes.first; bt; bt= bt->next) tot++;
/* if cur not is 1; move that to front of list */
if(cur!=1) {
a= 1;
for(bt= U.themes.first; bt; bt= bt->next, a++) {
if(a==cur) {
BLI_remlink(&U.themes, bt);
BLI_addhead(&U.themes, bt);
- fix: switching main Theme didn't update button drawtype for info buttons
2003-11-23 13:48:12 +00:00
allqueue(REDRAWALL, 0);
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
cur= 1;
break;
}
}
}
/* the current theme */
btheme= U.themes.first;
if(strcmp(btheme->name, "Default")==0) isbuiltin= 1;
/* construct popup script */
string[0]= 0;
for(bt= U.themes.first; bt; bt= bt->next) {
strcat(string, bt->name);
if(btheme->next) strcat(string, " |");
}
uiDefButS(block, MENU, B_UPDATE_THEME, string, 45,y3,200,20, &cur, 0, 0, 0, 0, "Current theme");
/* add / delete / name */
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
if(tot<16)
uiDefBut(block, BUT, B_ADD_THEME, "Add", 45,y2,200,20, NULL, 0, 0, 0, 0, "Makes new copy of this theme");
if(tot>1 && isbuiltin==0)
uiDefBut(block, BUT, B_DEL_THEME, "Delete", 45,y1,200,20, NULL, 0, 0, 0, 0, "Delete theme");
if(isbuiltin) return;
/* name */
uiDefBut(block, TEX, B_NAME_THEME, "", 255,y3,200,20, btheme->name, 1.0, 30.0, 0, 0, "Rename theme");
/* main choices pup */
* Fixed a silly problem when changing the colours of the 'Neutral' button theme entry (which changed both the outline of buttons and various other grey buttons). Added a new theme colour 'Outline' and left 'Neutral' to remain, well, neutral. Thanks Desoto for the report.
2004-01-10 13:41:03 +00:00
uiDefButS(block, MENU, B_CHANGE_THEME, "UI and Buttons %x1|%l|3D View %x2|%l|Ipo Curve Editor %x3|Action Editor %x4|"
Bugfixes: - Deleting bone in editmode did not check for pose layers when clearing pose channels or constraint targets.... - Button 'use nodes' in header of Node editor could only be pressed once - New 'normal' button messed with default material in blender - Theme options for Node window available now in Info window
2005-12-30 15:56:42 +00:00
"NLA Editor %x5|%l|UV/Image Editor %x6|Video Sequence Editor %x7|Node Editor %x16|Timeline %x15|Audio Window %x8|Text Editor %x9|%l|User Preferences %x10|"
Since the outliner is now the default (rather than the OOPS Schematic), we now call it 'Outliner' in the menu.
2004-11-14 13:35:57 +00:00
"Outliner %x11|Buttons Window %x12|%l|File Browser %x13|Image Browser %x14",
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
255,y2,200,20, &curmain, 0, 0, 0, 0, "Specify theme for...");
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
if(curmain==1) spacetype= 0;
else if(curmain==2) spacetype= SPACE_VIEW3D;
else if(curmain==3) spacetype= SPACE_IPO;
- themed all window types... phew! BTW: text colors don't work everywhere yet... but this state should be save to store themes in your .B.blend (CTRL+X) and some fixes: - leftmouse click now works in NLA and Action window to select a strip in the left part - faceselect+vpaint mode didnt show both panels
2003-10-22 23:20:44 +00:00
else if(curmain==4) spacetype= SPACE_ACTION;
else if(curmain==5) spacetype= SPACE_NLA;
else if(curmain==6) spacetype= SPACE_IMAGE;
else if(curmain==7) spacetype= SPACE_SEQ;
else if(curmain==8) spacetype= SPACE_SOUND;
else if(curmain==9) spacetype= SPACE_TEXT;
else if(curmain==10) spacetype= SPACE_INFO;
else if(curmain==11) spacetype= SPACE_OOPS;
else if(curmain==12) spacetype= SPACE_BUTS;
else if(curmain==13) spacetype= SPACE_FILE;
else if(curmain==14) spacetype= SPACE_IMASEL;
UI goodies & cleanup - TimeLine: Marker grabbing works now. Use GKEY or select+drag, as usual Holding CTRL will step with 1 second (corrected for ntsc dudes yes!) Also added this in header pulldown - Time values and Time grid draw fixed for Seconds display. It used to draw steps of 2/5/10/20/50/100 etc. frames. Now does steps in seconds. Again corrected for "Frames/Sec" value. - "Frames/Sec" button redraws TimeLine, Secquencer, etc - Bug fixed in editing Theme for TimeLine (was editing Image Select...) - Added Grid color to Theme choices for Ipo, TimeLine, Sequencer, NLA, Action, Sound. Was missing!
2005-05-08 11:24:46 +00:00
else if(curmain==15) spacetype= SPACE_TIME;
Bugfixes: - Deleting bone in editmode did not check for pose layers when clearing pose channels or constraint targets.... - Button 'use nodes' in header of Node editor could only be pressed once - New 'normal' button messed with default material in blender - Theme options for Node window available now in Info window
2005-12-30 15:56:42 +00:00
else if(curmain==16) spacetype= SPACE_NODE;
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
else return; /* only needed while coding... when adding themes for more windows */
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
/* color choices pup */
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
if(curmain==1) {
strp= BIF_ThemeColorsPup(0);
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
if(th_curcol==TH_BACK) th_curcol= TH_BUT_OUTLINE; /* switching main choices... */
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
}
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
else strp= BIF_ThemeColorsPup(spacetype);
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
uiDefButS(block, MENU, B_REDR, strp, 255,y1,200,20, &th_curcol, 0, 0, 0, 0, "Current color");
MEM_freeN(strp);
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
th_curcol_ptr= col= BIF_ThemeGetColorPtr(btheme, spacetype, th_curcol);
if(col==NULL) return;
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
/* first handle exceptions, special single values, row selection, etc */
if(th_curcol==TH_VERTEX_SIZE) {
uiDefButC(block, NUMSLI, B_UPDATE_THEME,"Vertex size ", 465,y3,200,20, col, 1.0, 10.0, 0, 0, "");
}
Three bugfixes, thnx to irc testing! :) - separate crashed - wrong button for 'face dot' theme - deselect vertex on mouseclick didnt work
2004-09-23 22:17:52 +00:00
else if(th_curcol==TH_FACEDOT_SIZE) {
uiDefButC(block, NUMSLI, B_UPDATE_THEME,"Face dot size ", 465,y3,200,20, col, 1.0, 10.0, 0, 0, "");
}
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
else if(th_curcol==TH_BUT_DRAWTYPE) {
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
uiBlockBeginAlign(block);
- Added button align code: uiBlockBeginAlign(block, 'v'); 'v'= vertical. 'h'=horizontal ..... (button def calls) uiBlockEndAlign(block); this will allow new themes to have buttons nicely drawn together. - added new rounded draw theme, to test & illustrate the above. - only did parts of button code with align... rest for later - fixed 'minimal' theme to make it usable (with some decoration) - put back 'oldskool' theme... but it just looks plain ugly! remove? Lazy people: http://www.blender.org/bf/rt.jpg check the top header, or Nkey menu, to see the meaning of 'align'.
2003-11-14 00:44:48 +00:00
uiDefButC(block, ROW, B_UPDATE_THEME, "Minimal", 465,y3,100,20, col, 2.0, 0.0, 0, 0, "");
uiDefButC(block, ROW, B_UPDATE_THEME, "Shaded", 565,y3,100,20, col, 2.0, 1.0, 0, 0, "");
uiDefButC(block, ROW, B_UPDATE_THEME, "Rounded", 465,y2,100,20, col, 2.0, 2.0, 0, 0, "");
uiDefButC(block, ROW, B_UPDATE_THEME, "OldSkool", 565,y2,100,20, col, 2.0, 3.0, 0, 0, "");
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
uiBlockEndAlign(block);
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
}
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
else {
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
uiBlockBeginAlign(block);
Siggraph show commit! - pending commit for OSX intel systems, with intel graphics. These now call an extra swapbuffers after glFlush(). Code is ifdeffed, and doesnt affect other systems. - show-off commit: option to have transparent nodes over the composite result. Only draws Image for active Viewer Node now, and image doesnt translate nor zoom (which isnt bad though). Set in themes the alpha color of "node backdrop" to make nodes transparent.
2006-07-31 19:23:42 +00:00
if ELEM8(th_curcol, TH_PANEL, TH_LAMP, TH_FACE, TH_FACE_SELECT, TH_MENU_BACK, TH_MENU_HILITE, TH_MENU_ITEM, TH_NODE) {
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
uiDefButC(block, NUMSLI, B_UPDATE_THEME,"A ", 465,y3+25,200,20, col+3, 0.0, 255.0, B_THEMECOL, 0, "");
}
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
uiDefButC(block, NUMSLI, B_UPDATE_THEME,"R ", 465,y3,200,20, col, 0.0, 255.0, B_THEMECOL, 0, "");
uiDefButC(block, NUMSLI, B_UPDATE_THEME,"G ", 465,y2,200,20, col+1, 0.0, 255.0, B_THEMECOL, 0, "");
uiDefButC(block, NUMSLI, B_UPDATE_THEME,"B ", 465,y1,200,20, col+2, 0.0, 255.0, B_THEMECOL, 0, "");
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
uiBlockEndAlign(block);
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
Added colorpicker support for theme editor
2004-07-22 13:40:17 +00:00
uiDefButC(block, COL, B_UPDATE_THEME, "", 675,y1,50,y3-y1+20, col, 0, 0, 0, 0, "");
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
/* copy paste */
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
uiBlockBeginAlign(block);
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
uiDefBut(block, BUT, B_THEME_COPY, "Copy Color", 755,y2,120,20, NULL, 0, 0, 0, 0, "Stores current color in buffer");
uiDefBut(block, BUT, B_THEME_PASTE, "Paste Color", 755,y1,120,20, NULL, 0, 0, 0, 0, "Pastes buffer color");
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
uiBlockEndAlign(block);
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
uiDefButC(block, COL, 0, "", 885,y1,50,y2-y1+20, th_curcol_arr, 0, 0, 0, 0, "");
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
}
}
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
drawinfospace function now matches zr's recent changes
2003-05-04 11:20:14 +00:00
void drawinfospace(ScrArea *sa, void *spacedata)
Initial revision
2002-10-12 11:37:38 +00:00
{
uiBlock *block;
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
static short cur_light=0, cur_light_var=0;
- themed all window types... phew! BTW: text colors don't work everywhere yet... but this state should be save to store themes in your .B.blend (CTRL+X) and some fixes: - leftmouse click now works in NLA and Action window to select a strip in the left part - faceselect+vpaint mode didnt show both panels
2003-10-22 23:20:44 +00:00
float fac, col[3];
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
short xpos, ypos, ypostab, buth, rspace, dx, y1, y2, y3, y4, y5, y6;
short y2label, y3label, y4label, y5label, y6label;
short spref, mpref, lpref, smfileselbut;
short edgsp, midsp;
Initial revision
2002-10-12 11:37:38 +00:00
char naam[32];
A couple of smaller fixes; - Modifier Panel, name label for "Virtual" modifiers was too short - On extrude Bones, "soft distance" now is always set based on length of the bone (also on CTRL+click, also when Envelope drawmode is not set) - Added undo-push for "Apply Bone Envelopees to VertexGroup" in WeightPaint. - Menu-buttons in floating panels sometimes gave drawing error - InfoWindow buttons were always allocated & drawn, even when window was zero sized... waste of cpu, tsk!
2005-08-20 09:55:11 +00:00
if(curarea->win==0 || curarea->winy<2) return;
Initial revision
2002-10-12 11:37:38 +00:00
- themed all window types... phew! BTW: text colors don't work everywhere yet... but this state should be save to store themes in your .B.blend (CTRL+X) and some fixes: - leftmouse click now works in NLA and Action window to select a strip in the left part - faceselect+vpaint mode didnt show both panels
2003-10-22 23:20:44 +00:00
BIF_GetThemeColor3fv(TH_BACK, col);
glClearColor(col[0], col[1], col[2], 0.0);
Initial revision
2002-10-12 11:37:38 +00:00
glClear(GL_COLOR_BUFFER_BIT);
Fixed the very annoying display of User Settings Menu when Blender window is wider than 1280 pixels. It now keeps scale at 100% then, without zoom.
2004-12-03 16:32:24 +00:00
if(curarea->winx<=1280.0) {
fac= ((float)curarea->winx)/1280.0f;
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
myortho2(0.375f, 1280.375f, 0.375f, curarea->winy/fac + 0.375f);
Fixed the very annoying display of User Settings Menu when Blender window is wider than 1280 pixels. It now keeps scale at 100% then, without zoom.
2004-12-03 16:32:24 +00:00
}
else {
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
myortho2(0.375f, (float)curarea->winx + 0.375f, 0.375f, (float)curarea->winy + 0.375f);
Fixed the very annoying display of User Settings Menu when Blender window is wider than 1280 pixels. It now keeps scale at 100% then, without zoom.
2004-12-03 16:32:24 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
sprintf(naam, "infowin %d", curarea->win);
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
block= uiNewBlock(&curarea->uiblocks, naam, UI_EMBOSS, UI_HELV, curarea->win);
Initial revision
2002-10-12 11:37:38 +00:00
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
/* Vars for nice grid alignment */
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
dx= (1280-90)/7; /* spacing for use in equally dividing 'tab' row */
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
xpos = 45; /* left padding */
ypos = 50; /* bottom padding for buttons */
ypostab = 10; /* bottom padding for 'tab' row */
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
buth = 20; /* standard button height */
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
spref = 90; /* standard size for small preferences button */
mpref = 189; /* standard size for medium preferences button */
lpref = 288; /* standard size for large preferences button */
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
smfileselbut = buth; /* standard size for fileselect button (square) */
Scripts menus: -- added re-eval entry to Scripts Win -> Scripts menu -- added it also as a button at Info Win -> File Paths, Python path -- updated bpymenus code: added 'Blender' tag, for version; made a .Bpymenus file be written only if there's actual data to save made file->export menu open a scriptspace only if none is available already -- bug fixes (bugs 866 and 879, related) for linking and sharing mesh data: http://projects.blender.org/tracker/?func=detail&atid=125&aid=866&group_id=9 http://projects.blender.org/tracker/?func=detail&atid=125&aid=879&group_id=9
2004-01-16 23:40:14 +00:00
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
edgsp = 3; /* space from edge of end 'tab' to edge of end button */
midsp = 9; /* horizontal space between buttons */
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
rspace = 3; /* default space between rows */
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
y1 = ypos; /* grid alignment for each row of buttons */
y2 = ypos+buth+rspace;
y3 = ypos+2*(buth+rspace);
y4 = ypos+3*(buth+rspace);
y5 = ypos+4*(buth+rspace);
y6 = ypos+5*(buth+rspace);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
y2label = y2-2; /* adjustments to offset the labels down to align better */
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
y3label = y3-2;
y4label = y4-2;
y5label = y5-2;
y6label = y6-2;
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
/* set the colour to blue and draw the main 'tab' controls */
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
uiBlockSetCol(block, TH_BUT_SETTING1);
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
uiBlockBeginAlign(block);
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
uiDefButS(block, ROW,B_USERPREF,"View & Controls",
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
xpos,ypostab,(short)dx,buth,
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
&U.userpref,1.0,0.0, 0, 0,"");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
uiDefButS(block, ROW,B_USERPREF,"Edit Methods",
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
(short)(xpos+dx),ypostab,(short)dx,buth,
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
&U.userpref,1.0,1.0, 0, 0,"");
Initial revision
2002-10-12 11:37:38 +00:00
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
uiDefButS(block, ROW,B_USERPREF,"Language & Font",
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
(short)(xpos+2*dx),ypostab,(short)dx,buth,
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
&U.userpref,1.0,2.0, 0, 0,"");
Initial revision
2002-10-12 11:37:38 +00:00
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
uiDefButS(block, ROW,B_USERPREF,"Themes",
- one button was invisible...
2003-10-17 14:11:17 +00:00
(short)(xpos+3*dx),ypostab,(short)dx,buth,
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
&U.userpref,1.0,6.0, 0, 0,"");
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
uiDefButS(block, ROW,B_USERPREF,"Auto Save",
- one button was invisible...
2003-10-17 14:11:17 +00:00
(short)(xpos+4*dx),ypostab,(short)dx,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&U.userpref,1.0,3.0, 0, 0,"");
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
uiDefButS(block, ROW,B_USERPREF,"System & OpenGL",
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
(short)(xpos+5*dx),ypostab,(short)dx,buth,
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
&U.userpref,1.0,4.0, 0, 0,"");
- one button was invisible...
2003-10-17 14:11:17 +00:00
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
uiDefButS(block, ROW,B_USERPREF,"File Paths",
- one button was invisible...
2003-10-17 14:11:17 +00:00
(short)(xpos+6*dx),ypostab,(short)dx,buth,
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
&U.userpref,1.0,5.0, 0, 0,"");
added mousewheel support part 2
2003-01-28 11:14:38 +00:00
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
uiBlockSetCol(block, TH_AUTO);
- finished some minor drawing stuff which i couldnt complete last friday: (related to rounded theme) - layer buttons in view3d header grouped - outline colour now blends darker with respect to background (better visibility on dark backgrounds) - added some align calls to user settings menu Now back to real bugs!
2003-11-17 14:31:25 +00:00
uiBlockEndAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
/* end 'tab' controls */
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
/* line 2: left x co-ord, top y co-ord, width, height */
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
if(U.userpref == 6) {
info_user_themebuts(block, y1, y2, y3);
}
else if (U.userpref == 0) { /* view & controls */
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
uiDefBut(block, LABEL,0,"Display:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos,y6label,spref,buth,
0, 0, 0, 0, 0, "");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockBeginAlign(block);
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
uiDefButBitI(block, TOG, USER_TOOLTIPS, 0, "Tool Tips",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp),y5,spref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.flag), 0, 0, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"Display tooltips (help tags) over buttons");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_DRAWVIEWINFO, B_DRAWINFO, "Object Info",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp),y4,spref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.uiflag), 0, 0, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"Display active object name and frame number in the 3D View");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_SCENEGLOBAL, 0, "Global Scene",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp),y3,spref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.flag), 0, 0, 0, 0,
"Forces the current Scene to be displayed in all Screens");
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
#ifndef __APPLE__
- got rid of silly #define ..._BIT, #define ... (1<<..._BIT) stuff - switched almost all uiDefBut(..., TOG|BIT|..) to use UiDefButBit and the name of the actual bit define instead of just a magic constant, this makes searching the code much nicer. most of the credit here goes to LetterRip who did almost all of the conversions, I mostly just checked them over.
2005-08-03 18:48:22 +00:00
uiDefButBitS(block, TOG, 1, 0, "Large Cursors",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp),y2,spref,buth,
&(U.curssize), 0, 0, 0, 0,
"Use large mouse cursors when available");
#else
U.curssize=0; /*Small Cursor always for OS X for now */
#endif
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
uiDefButBitI(block, TOG, USER_SHOW_VIEWPORTNAME, B_DRAWINFO, "View Name",
Patch #3365, Toolbox from Tuhopuu Patch prvovided by Guillermo, code was - afaik - from Rob Haarsma. This changes the toolbox (space menu) to have the first level aligned vertically. Works much easier that way, and since the items open either left or right, it doesn't flip order of the contents for it either. To allow people to test (and to compare) it's a user menu setting (in View & Controls, "Plain menus"). I've turned this on by default though, since I propose to not have it a user setting. User setting can be removed later. Fixed two bugs in patch: - if saved in user settings, first time usage of this toolbox opened in wrong location - Button for "plain menus" was writing a short in an int (causing this new menu not to work for big endian systems) As a bonus I've added the long wanted hotkey support for opening and closing sublevels of pulldowns with arrow keys! I didn't add the commenting out of correcting pulldown menu order, which is based on location of the originating button in the UI. This uncommenting didn't solve anything, since button definitions itself can be flipped too. (Example: the data brose menus in top bar need to be corrected). I can imagine the order flipping is sometimes annoying, but it still has reasons to be there; - the most important / most used items are always closest to the mouse. (like opening properties panel, or "Add new" for material. - it follows muscle memory and 'locus of attention' (mouse position). - menus are configured to open to the top for bottom headers, and to the bottom for top headers. We can expect the UI is configured consistantly for headers, so in general the menus will appear consistant as well. Where menu flipping fails is especially for alphabetic listings, like in the menu button of fileselect. However, that one should be configured to open by default to the bottom, so ordering is consistant as well. If people like to check this themselves; uncomment the lines in the top of the function uiBlockFlipOrder() in src/interface.c
2005-11-19 15:16:34 +00:00
(xpos+edgsp),y1,spref,buth,
&(U.uiflag), 0, 0, 0, 0,
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
"Show the name of the view's direction in each 3D View");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockEndAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiDefBut(block, LABEL,0,"Menus:",
(xpos+(2*edgsp)+spref),y6label,spref,buth,
- Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world - Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world
2003-10-12 13:58:56 +00:00
0, 0, 0, 0, 0, "");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockBeginAlign(block);
uiDefButBitI(block, TOG, USER_MENUOPENAUTO, 0, "Open on Mouse Over",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+spref+midsp),y5,mpref,buth,
- Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world - Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world
2003-10-12 13:58:56 +00:00
&(U.uiflag), 0, 0, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"Open menu buttons and pulldowns automatically when the mouse is hovering");
uiDefButS(block, NUM, 0, "Top Level:",
(xpos+edgsp+spref+midsp),y4,spref+edgsp,buth,
- Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world - Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world
2003-10-12 13:58:56 +00:00
&(U.menuthreshold1), 1, 40, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"Time delay in 1/10 seconds before automatically opening top level menus");
uiDefButS(block, NUM, 0, "Sublevels:",
(xpos+edgsp+(2*spref)+(2*midsp)-edgsp),y4,spref+edgsp,buth,
- Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world - Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world
2003-10-12 13:58:56 +00:00
&(U.menuthreshold2), 1, 40, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"Time delay in 1/10 seconds before automatically opening menu sublevels");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockEndAlign(block);
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiDefBut(block, LABEL,0,"Toolbox click-hold delay:",
(xpos+(2*edgsp)+spref),y3label,mpref,buth,
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
0, 0, 0, 0, 0, "");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockBeginAlign(block);
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
uiDefButS(block, NUM, 0, "LMB:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+spref+midsp),y2,spref+edgsp,buth,
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
&(U.tb_leftmouse), 2, 40, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"Time in 1/10 seconds to hold the Left Mouse Button before opening the toolbox");
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
uiDefButS(block, NUM, 0, "RMB:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2*spref)+(2*midsp)-edgsp),y2,spref+edgsp,buth,
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
&(U.tb_rightmouse), 2, 40, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"Time in 1/10 seconds to hold the Right Mouse Button before opening the toolbox");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockEndAlign(block);
uiDefButBitI(block, TOG, USER_PANELPINNED, 0, "Pin Floating Panels",
(xpos+edgsp+spref+midsp),y1,(mpref/2),buth,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
&(U.uiflag), 0, 0, 0, 0,
"Make floating panels invoked by a hotkey (eg. N Key) open at the previous location");
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
uiDefButBitI(block, TOG, USER_PLAINMENUS, B_PLAINMENUS, "Plain Menus",
(xpos+edgsp+(2*spref)+(2*midsp)),y1,spref,buth,
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
&(U.uiflag), 0, 0, 0, 0,
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
"Use a column layout for toolbox and do not flip the contents of any menu");
uiBlockEndAlign(block);
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiDefBut(block, LABEL,0,"Snap to grid:",
(xpos+(2*edgsp)+spref+midsp+mpref),y6label,mpref,buth,
0, 0, 0, 0, 0, "");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockBeginAlign(block);
uiDefButBitI(block, TOG, USER_AUTOGRABGRID, 0, "Grab/Move",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+spref+(2*midsp)),y5,spref,buth,
&(U.flag), 0, 0, 0, 0,
"Snap objects and sub-objects to grid units when moving");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_AUTOROTGRID, 0, "Rotate",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+spref+(2*midsp)),y4,spref,buth,
&(U.flag), 0, 0, 0, 0,
"Snap objects and sub-objects to grid units when rotating");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_AUTOSIZEGRID, 0, "Scale",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+spref+(2*midsp)),y3,spref,buth,
&(U.flag), 0, 0, 0, 0,
"Snap objects and sub-objects to grid units when scaling");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockEndAlign(block);
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
uiDefButBitI(block, TOG, USER_LOCKAROUND, B_DRAWINFO, "Global Pivot",
(xpos+edgsp+mpref+spref+(2*midsp)),y1,spref,buth,
&(U.uiflag), 0, 0, 0, 0,
"Lock the same rotation/scaling pivot in all 3D Views");
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
uiDefBut(block, LABEL,0,"View zoom:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+(2*edgsp)+mpref+(2*spref)+(2*midsp)),y6label,mpref,buth,
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
0, 0, 0, 0, 0, "");
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiBlockBeginAlign(block);
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockSetCol(block, TH_BUT_SETTING1); /* mutually exclusive toggles, start color */
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
uiDefButS(block, ROW, 0, "Continue",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+(2*spref)+(3*midsp)),y5,(mpref/3),buth,
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
&(U.viewzoom), 40, USER_ZOOM_CONT, 0, 0,
"Old style zoom, continues while moving mouse up or down");
uiDefButS(block, ROW, 0, "Dolly",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+(2*spref)+(3*midsp)+(mpref/3)),y5,(mpref/3),buth,
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
&(U.viewzoom), 40, USER_ZOOM_DOLLY, 0, 0,
"Zooms in and out based on vertical mouse movement.");
uiDefButS(block, ROW, 0, "Scale",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+(2*spref)+(3*midsp)+(2*mpref/3)),y5,(mpref/3),buth,
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
&(U.viewzoom), 40, USER_ZOOM_SCALE, 0, 0,
"Zooms in and out like scaling the view, mouse movements relative to center.");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockSetCol(block, TH_AUTO); /* end color */
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiBlockEndAlign(block);
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
uiDefBut(block, LABEL,0,"View rotation:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+(2*edgsp)+mpref+(2*spref)+(2*midsp)),y4label,mpref,buth,
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
0, 0, 0, 0, 0, "");
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiBlockBeginAlign(block);
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockSetCol(block, TH_BUT_SETTING1); /* mutually exclusive toggles, start color */
uiDefButBitI(block, TOG, USER_TRACKBALL, B_DRAWINFO, "Trackball",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+(2*spref)+(3*midsp)),y3,(mpref/2),buth,
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
&(U.flag), 0, 0, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"Allow the view to tumble freely when orbiting with the Middle Mouse Button");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOGN, USER_TRACKBALL, B_DRAWINFO, "Turntable",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+(2*spref)+(3*midsp)+(mpref/2)),y3,(mpref/2),buth,
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
&(U.flag), 0, 0, 0, 0,
Stage two of the giant animation recode project; Ipo/Action/NLA cleanup -> Note; added 2 new c files (split editipo.c). MSVC needs upgrade. Impatient people can check the goodies in CMS: http://www.blender3d.org/cms/Action_and_NLA_editor.706.0.html Most work was on trying to unwind the spaghetti for editing ipos. Too much history and bad design got added here. Most evident changes: - made generic 'context' for detecting which Ipo is being edited, or to assign ipos or to retrieve ipo curves. - made generic insertkey() for all ipo types, including actions - shuffled a lot of code around to make things more logical. Also made sure local functions are not exported It is far from ready... when action/nla was added in Blender, a lot of duplicate code was generated. That's for another time. Now the goodies; - made Actions to allow any Ipo type - made NLA to define active actions, for Action window too - corrected timing for active action, so it shows the 'real time', as defined in NLA editor. I did update python code, but that would require testing. Testing is needed for this commit in general, too many changes happened on all levels of the animation system. :) Will keep track of all reports this evening, hopefully it doesnt break the pre-release schedule!
2005-10-10 17:42:48 +00:00
"Use fixed up axis for orbiting with Middle Mouse Button");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockSetCol(block, TH_AUTO); /* end color */
uiDefButBitI(block, TOG, USER_AUTOPERSP, B_DRAWINFO, "Auto Perspective",
(xpos+edgsp+mpref+(2*spref)+(3*midsp)),y2,(mpref/2),buth,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
&(U.uiflag), 0, 0, 0, 0,
"Automatically switch between orthographic and perspective when changing from top/front/side views");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_ORBIT_SELECTION, B_DRAWINFO, "Around Active",
(xpos+edgsp+mpref+(2*spref)+(3*midsp)+(mpref/2)),y2,(mpref/2),buth,
&(U.uiflag), 0, 0, 0, 0,
"Keep the active object in place when orbiting the views (Object Mode)");
uiBlockEndAlign(block);
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
uiBlockBeginAlign(block);
uiDefButBitI(block, TOG, USER_SHOW_ROTVIEWICON, B_DRAWINFO, "Mini Axis",
(xpos+edgsp+(2*mpref)+(2*midsp)),y1,(mpref/3),buth,
&(U.uiflag), 0, 0, 0, 0,
"Show a small rotating 3D axis in the bottom left corner of the 3D View");
uiDefButS(block, NUM, B_DRAWINFO, "Size:",
(xpos+edgsp+(2*mpref)+(2*midsp)+(mpref/3)),y1,(mpref/3),buth,
&U.rvisize, 10, 64, 0, 0,
"The axis icon's size");
uiDefButS(block, NUM, B_DRAWINFO, "Bright:",
(xpos+edgsp+(2*mpref)+(2*midsp)+2*(mpref/3)),y1,(mpref/3),buth,
&U.rvibright, 0, 10, 0, 0,
"The brightness of the icon");
uiBlockEndAlign(block);
- made option for auto open toolbox on left/mouse hold. standard starts with 0.5 sec. Turn the threshold value up to effectively disable it when you dislike it. But give it a try! - added 'Home' after splitting window for buttonswindow
2003-10-29 01:10:10 +00:00
A hopefully less weird way of doing the selection mouse button user preference
2004-07-29 05:03:02 +00:00
uiDefBut(block, LABEL,0,"Select with:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+(2*edgsp)+(3*mpref)+(3*midsp)),y6label,mpref,buth,
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
0, 0, 0, 0, 0, "");
uiBlockBeginAlign(block);
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockSetCol(block, TH_BUT_SETTING1); /* mutually exclusive toggles, start color */
uiDefButBitI(block, TOG, USER_LMOUSESELECT, B_DRAWINFO, "Left Mouse",
Tiny tweak to the selection mouse button prefs- put the 'left mouse' button on the left side, and vice versa :)
2004-08-01 03:07:56 +00:00
(xpos+edgsp+(3*mpref)+(4*midsp)),y5,(mpref/2),buth,
A hopefully less weird way of doing the selection mouse button user preference
2004-07-29 05:03:02 +00:00
&(U.flag), 0, 0, 0, 0, "Use the Left Mouse Button for selection");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOGN, USER_LMOUSESELECT, B_DRAWINFO, "Right Mouse",
Tiny tweak to the selection mouse button prefs- put the 'left mouse' button on the left side, and vice versa :)
2004-08-01 03:07:56 +00:00
(xpos+edgsp+(3*mpref)+(4*midsp)+(mpref/2)),y5,(mpref/2),buth,
&(U.flag), 0, 0, 0, 0, "Use the Right Mouse Button for selection");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockSetCol(block, TH_AUTO); /* end color */
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
uiBlockEndAlign(block);
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
A hopefully less weird way of doing the selection mouse button user preference
2004-07-29 05:03:02 +00:00
if(U.flag & USER_LMOUSESELECT) {
uiDefBut(block, LABEL,0,"Cursor with: Right Mouse",
(xpos+(2*edgsp)+(3*mpref)+(3*midsp)),y4label+5,mpref,buth,
0, 0, 0, 0, 0, "");
} else {
uiDefBut(block, LABEL,0,"Cursor with: Left Mouse",
(xpos+(2*edgsp)+(3*mpref)+(3*midsp)),y4label+5,mpref,buth,
0, 0, 0, 0, 0, "");
}
Bug reported by Wavez; Leftmouse select option doesn't work with "Emulate 3 button mouse" option. The latter maps middle mouse to ALT+leftmouse, frustrating loop select for example. Add tooltip to say this, made option to disable automatic on load (version check) and made buttons redraw to show option being disabled. Note; wrapping middle mouse to ALT+RMB will frustrate 1 button mices... the current code for leftmouse-select is a hack at best, better do this good when we have proper event handlers system.
2004-11-29 12:15:25 +00:00
/* illegal combo... */
if (U.flag & USER_LMOUSESELECT)
U.flag &= ~USER_TWOBUTTONMOUSE;
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_TWOBUTTONMOUSE, B_DRAWINFO, "Emulate 3 Button Mouse",
A hopefully less weird way of doing the selection mouse button user preference
2004-07-29 05:03:02 +00:00
(xpos+edgsp+(3*mpref)+(4*midsp)),y3,mpref,buth,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
&(U.flag), 0, 0, 0, 0,
Bug reported by Wavez; Leftmouse select option doesn't work with "Emulate 3 button mouse" option. The latter maps middle mouse to ALT+leftmouse, frustrating loop select for example. Add tooltip to say this, made option to disable automatic on load (version check) and made buttons redraw to show option being disabled. Note; wrapping middle mouse to ALT+RMB will frustrate 1 button mices... the current code for leftmouse-select is a hack at best, better do this good when we have proper event handlers system.
2004-11-29 12:15:25 +00:00
"Emulates Middle Mouse with Alt+LeftMouse (doesnt work with Left Mouse Select option)");
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiDefBut(block, LABEL,0,"Middle Mouse Button:",
(xpos+(2*edgsp)+(4*mpref)+(4*midsp)),y6label,mpref,buth,
Restored oldstyle zoom in/out, and added a new userpref for denoting zoom types: - Continue: is default, old style - Dolly: is like previous, but not continuous - Scale: is the new method. Name is based on fact it scales view
2004-06-16 13:31:32 +00:00
0, 0, 0, 0, 0, "");
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiBlockBeginAlign(block);
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockSetCol(block, TH_BUT_SETTING1); /* mutually exclusive toggles, start color */
uiDefButBitI(block, TOGN, USER_VIEWMOVE, B_DRAWINFO, "Rotate View",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(4*mpref)+(5*midsp)),y5,(mpref/2),buth,
&(U.flag), 0, 0, 0, 0, "Default action for the Middle Mouse Button");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_VIEWMOVE, B_DRAWINFO, "Pan View",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(4*mpref)+(5*midsp)+(mpref/2)),y5,(mpref/2),buth,
&(U.flag), 0, 0, 0, 0, "Default action for the Middle Mouse Button");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockSetCol(block, TH_AUTO); /* end color */
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiBlockEndAlign(block);
uiDefBut(block, LABEL,0,"Mouse Wheel:",
(xpos+(2*edgsp)+(4*mpref)+(4*midsp)),y4label,mpref,buth,
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
0, 0, 0, 0, 0, "");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockBeginAlign(block);
uiDefButBitI(block, TOG, USER_WHEELZOOMDIR, 0, "Invert Zoom",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(4*mpref)+(5*midsp)),y3,spref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.uiflag), 0, 0, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"Swap the Mouse Wheel zoom direction");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
uiDefButI(block, NUM, 0, "Scroll Lines:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(4*mpref)+(6*midsp)+spref-edgsp),y3,spref+edgsp,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&U.wheellinescroll, 0.0, 32.0, 0, 0,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
"The number of lines scrolled at a time with the mouse wheel");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockEndAlign(block);
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
More transform widget goodies; - added 'ghosting' for while using translate/scaling widget - added 'pie chart' ghost to denote angle while using rotate widget - added settings to tweak widget in User menu (InfoWindow) "View & Control" - Size: total widget size as percentage of window size - Handle: as percentage of widget radius - Hotspot: for clicking handles, in pixels - Fized Size: option to make Widget size independent of window size Not sure if all of these are useful to keep, but makes for good testing in this stage. Also: made #define to use new transform to be set TRUE by default now. :)
2005-03-21 14:20:04 +00:00
uiDefBut(block, LABEL,0,"3D Transform Widget:",
(xpos+(2*edgsp)+(5*mpref)+(5*midsp)),y6label,mpref,buth,
0, 0, 0, 0, 0, "");
uiBlockBeginAlign(block);
uiDefButS(block, NUM, B_REDRCURW3D, "Size:",
(xpos+edgsp+(5*mpref)+(6*midsp)),y5,(mpref/2),buth,
Finally switched to porting UI stuff from tuhopuu! This commit is based on the patch & cool design work of Matt. It includes the new Lamp drawing style, and replaces the Object center dots with a similar styled OpenGL drawn dot. Important side-note is that removing the old glDrawPixels() for centers or lamps will not only make Blender faster, but also prevents crashing on a couple of cheaper 3d cards (as reported for S3 and Intel on-board cards) Notes: - The new default only draws Object centers when selected or active. If you like to see them always, use the View Properties Panel. You can also save that in the .B.blend - The size for centers (and lamps) is in the User settings "View & Controls" - Unselected Lamps, and their offset lines from zero Z, are drawn in a new Theme color Changes and additions in Matt's patch: - Lamps and centers are drawn fixed size, in pixels. Also the 'sun' lamp draws screen aligned now. - Center dots now also draw in blue to denote Library linkage or to show that an Object has been linked to other scenes. - When objects are empty (no vertices) they will always draw a center dot. Otherwise these objects would never be selectable anymore! - Added theme setting for center size, and initialization - Removed the old redundant code for drawing centers - Cleanup of drawing routines, made center dots faster - Started removing calls to glBlendFunc(). Regular alpha drawing should become standard, and the (very) occasional exception should return this to default after usage.
2005-11-19 10:55:07 +00:00
&(U.tw_size), 2, 40, 0, 0, "Diameter of widget, in 10 pixel units");
More transform widget goodies; - added 'ghosting' for while using translate/scaling widget - added 'pie chart' ghost to denote angle while using rotate widget - added settings to tweak widget in User menu (InfoWindow) "View & Control" - Size: total widget size as percentage of window size - Handle: as percentage of widget radius - Hotspot: for clicking handles, in pixels - Fized Size: option to make Widget size independent of window size Not sure if all of these are useful to keep, but makes for good testing in this stage. Also: made #define to use new transform to be set TRUE by default now. :)
2005-03-21 14:20:04 +00:00
uiDefButS(block, NUM, B_REDRCURW3D, "Handle:",
(xpos+edgsp+(5*mpref)+(6*midsp)+(mpref/2)),y5,(mpref/2),buth,
&(U.tw_handlesize), 2, 40, 0, 0, "Size of widget handles as percentage of widget radius");
uiDefButS(block, NUM, B_REDRCURW3D, "Hotspot:",
Reflecting the discussions on Transform Manipulators... Here you can see the notes and pictures: http://www.blender3d.org/cms/Manipulator_Widgets.548.0.html The alternative rotate widgets are still under rt=2 and rt=3. Still enough work todo here, but hope it's a good step forward!
2005-04-24 13:22:24 +00:00
(xpos+edgsp+(5*mpref)+(6*midsp)),y4,(mpref),buth,
More transform widget goodies; - added 'ghosting' for while using translate/scaling widget - added 'pie chart' ghost to denote angle while using rotate widget - added settings to tweak widget in User menu (InfoWindow) "View & Control" - Size: total widget size as percentage of window size - Handle: as percentage of widget radius - Hotspot: for clicking handles, in pixels - Fized Size: option to make Widget size independent of window size Not sure if all of these are useful to keep, but makes for good testing in this stage. Also: made #define to use new transform to be set TRUE by default now. :)
2005-03-21 14:20:04 +00:00
&(U.tw_hotspot), 4, 40, 0, 0, "Hotspot in pixels for clicking widget handles");
uiBlockEndAlign(block);
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
uiDefButS(block, NUM, B_REDRCURW3D, "Object Center Size: ",
(xpos+edgsp+(5*mpref)+(6*midsp)),y3,mpref,buth,
Finally switched to porting UI stuff from tuhopuu! This commit is based on the patch & cool design work of Matt. It includes the new Lamp drawing style, and replaces the Object center dots with a similar styled OpenGL drawn dot. Important side-note is that removing the old glDrawPixels() for centers or lamps will not only make Blender faster, but also prevents crashing on a couple of cheaper 3d cards (as reported for S3 and Intel on-board cards) Notes: - The new default only draws Object centers when selected or active. If you like to see them always, use the View Properties Panel. You can also save that in the .B.blend - The size for centers (and lamps) is in the User settings "View & Controls" - Unselected Lamps, and their offset lines from zero Z, are drawn in a new Theme color Changes and additions in Matt's patch: - Lamps and centers are drawn fixed size, in pixels. Also the 'sun' lamp draws screen aligned now. - Center dots now also draw in blue to denote Library linkage or to show that an Object has been linked to other scenes. - When objects are empty (no vertices) they will always draw a center dot. Otherwise these objects would never be selectable anymore! - Added theme setting for center size, and initialization - Removed the old redundant code for drawing centers - Cleanup of drawing routines, made center dots faster - Started removing calls to glBlendFunc(). Regular alpha drawing should become standard, and the (very) occasional exception should return this to default after usage.
2005-11-19 10:55:07 +00:00
&(U.obcenter_dia), 4, 10, 0, 0,
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
"Diameter in Pixels for Object/Lamp center display");
Finally switched to porting UI stuff from tuhopuu! This commit is based on the patch & cool design work of Matt. It includes the new Lamp drawing style, and replaces the Object center dots with a similar styled OpenGL drawn dot. Important side-note is that removing the old glDrawPixels() for centers or lamps will not only make Blender faster, but also prevents crashing on a couple of cheaper 3d cards (as reported for S3 and Intel on-board cards) Notes: - The new default only draws Object centers when selected or active. If you like to see them always, use the View Properties Panel. You can also save that in the .B.blend - The size for centers (and lamps) is in the User settings "View & Controls" - Unselected Lamps, and their offset lines from zero Z, are drawn in a new Theme color Changes and additions in Matt's patch: - Lamps and centers are drawn fixed size, in pixels. Also the 'sun' lamp draws screen aligned now. - Center dots now also draw in blue to denote Library linkage or to show that an Object has been linked to other scenes. - When objects are empty (no vertices) they will always draw a center dot. Otherwise these objects would never be selectable anymore! - Added theme setting for center size, and initialization - Removed the old redundant code for drawing centers - Cleanup of drawing routines, made center dots faster - Started removing calls to glBlendFunc(). Regular alpha drawing should become standard, and the (very) occasional exception should return this to default after usage.
2005-11-19 10:55:07 +00:00
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
} else if (U.userpref == 1) { /* edit methods */
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
uiDefBut(block, LABEL,0,"Material linked to:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos,y3label,mpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
0, 0, 0, 0, 0, "");
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiBlockBeginAlign(block);
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOGN, USER_MAT_ON_OB, B_DRAWINFO, "ObData",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp),y2,(mpref/2),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.flag), 0, 0, 0, 0, "Link new objects' material to the obData block");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_MAT_ON_OB, B_DRAWINFO, "Object",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(mpref/2)),y2,(mpref/2),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.flag), 0, 0, 0, 0, "Link new objects' material to the object block");
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiBlockEndAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Fixes after report from Matt: - errors in names/hotkeys pulldowns fixed - full window option in pulldown win caused ortho on/off event - weight paint now shows vertex color Panel in editbuttons - adding armature while vpaint mode, didnt end vpaint mode - cleaned up some buttons design - leftmouse press-hold for toolbox also moved 3d cursor
2003-10-28 18:43:55 +00:00
Bugfix #3507 Global Undo didn't use the 'undo steps' value in the user presets yet... even whilst button mentioned 'editmode undo' there, an easy fix to add.
2005-12-05 11:46:40 +00:00
uiDefBut(block, LABEL,0,"Undo:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+(2*edgsp)+mpref),y3label, mpref,buth,
Fixes after report from Matt: - errors in names/hotkeys pulldowns fixed - full window option in pulldown win caused ortho on/off event - weight paint now shows vertex color Panel in editbuttons - adding armature while vpaint mode, didnt end vpaint mode - cleaned up some buttons design - leftmouse press-hold for toolbox also moved 3d cursor
2003-10-28 18:43:55 +00:00
0, 0, 0, 0, 0, "");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockBeginAlign(block);
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
uiDefButS(block, NUMSLI, B_DRAWINFO, "Steps: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+midsp),y2,mpref,buth,
Bugfix #3507 Global Undo didn't use the 'undo steps' value in the user presets yet... even whilst button mentioned 'editmode undo' there, an easy fix to add.
2005-12-05 11:46:40 +00:00
&(U.undosteps), 0, 64, 0, 0, "Number of undo steps available (smaller values conserve memory)");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
* patch #3876: Rotating view icon submitted by Davide Vercelli This replaces (as a user preference) the static icon shown in the bottom-left of the 3D View with a small rotating axis that updates live in all ortho/perspective modes I made several modifications to the original patch. In the patch, it displayed the axis on top of the 'object info' text since when floating panels are minimised, they sit in the bottom corner and cover the axis up. This annoyance is not limited to the axis, it also covers the frame number and info text, which can be frustrating. Sending them to the bottom is not that useful either, since it's quicker (with esc) and just as much movement to close and re-open them again. I decided to solve this problem at the cause: Now when using the disclosure triangle on floating panels, they 'minimise in place' rather than going to the bottom. User preferences are in the 'View & controls' section to: - Display either the 3D axis or the old icon - The size of the axis - the brightness of the axis (colours are taken from grid theme settings) * patch #3801: Option to show view direction in 3D View submitted by Daniele Fornaciari Simple one, just adds an user pref to show the name of the view's direction as text in the top left corner.
2006-04-25 12:26:46 +00:00
uiDefButBitI(block, TOG, USER_GLOBALUNDO, B_DRAWINFO, "Global Undo",
The undo test is now safely hidden behind a user-button (temporal) Activate it in User menu "edit methods"
2004-08-31 21:01:21 +00:00
(xpos+edgsp+mpref+midsp),y1,mpref,buth,
Bugfix #3507 Global Undo didn't use the 'undo steps' value in the user presets yet... even whilst button mentioned 'editmode undo' there, an easy fix to add.
2005-12-05 11:46:40 +00:00
&(U.uiflag), 2, 64, 0, 0, "Global undo works by keeping a full copy of the file itself in memory, so takes extra memory");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockEndAlign(block);
The undo test is now safely hidden behind a user-button (temporal) Activate it in User menu "edit methods"
2004-08-31 21:01:21 +00:00
Another mega commit... loadsof restructure, and a pretty good one! :) - changed the BIF_DrawString() function. it used to work different for AA fonts as for default fonts. Now it's identical. Setting color for fonts can just be done with OpenGL, for both font types. Removed: BIF_DrawStringRGB() - added theme color options for Buttons - recoded DefButton, so it automatically chooses the right color. - had to remove a 1000 uiBlockSetCol() calls for that reason... - uiBlockSetCol() still works, to override automatic color - removed entirely the silly old color system (BIFColorID). All color calls can now be done with a BIF_ThemeColor() call, including fonts and buttons and opengl stuff - all buttons in button header have headercolor by default - recoded drawing icons, it was a really bad & old loop doing manually colorshading and blending... which was per pixel a load of code! Now it uses a single OpenGL call to blend or colorize. Quite faster! - (as test, for review) icons don't colorize anymore with button color, but have a different alpha to blend in (when not active) - recoded the entire interface_draw.c file...: - drawing buttons is separated in three parts: 1. main drawing function for text and icons 2. free definable callback for button itself 3. free definable callback for slider - removed a load of redundant code for this! - coded a minimal theme, and adjusted Matt's buttons to match new callback system - adding new drawing themes is piece of cake now - for coders, default 'themes' to be aware of: UI_EMBOSS : the themable drawing style UI_EMBOSSP: the pulldown menu system (apart from color not themable) UI_EMBOSSN: draw nothing, only text and/or icon UI_EMBOSSM: minimal theme, still in use for Logic and Constraintsa this can be set with uiBlockSetEmboss(block) or in the uiNewBlock() call. TODO: make UI API call for button alignment (plus removed another series of warnings from code...) Plus: fixed bug in Matts commit: he used a 'short' button for an 'int'
2003-10-20 15:40:20 +00:00
Two little issues for Timeline window; - Using Arrowkeys to change frames didn't give proper redraw - Option "Record" now tied to the User-preset "Auto key insert". It is no user preset anymore even, I thought to leave a button in the User- presets for the time being though...
2005-05-05 18:31:39 +00:00
uiDefBut(block, LABEL,0,"Auto keyframe",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+(2*edgsp)+(2*mpref)+midsp),y3label,mpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
0, 0, 0, 0, 0, "");
orange: animation baking code. also a patch to autokey, to only key the keys made.
2005-12-18 20:14:22 +00:00
Rollback of http://projects.blender.org/pipermail/bf-blender-cvs/2005-June/003769.html (which I in my commithappyness did before properly checking)
2005-06-11 16:30:36 +00:00
uiDefButBitI(block, TOG, G_RECORDKEYS, REDRAWTIME, "Action and Object",
Two little issues for Timeline window; - Using Arrowkeys to change frames didn't give proper redraw - Option "Record" now tied to the User-preset "Auto key insert". It is no user preset anymore even, I thought to leave a button in the User- presets for the time being though...
2005-05-05 18:31:39 +00:00
(xpos+edgsp+(2*mpref)+(2*midsp)),y2,mpref, buth,
Rollback of http://projects.blender.org/pipermail/bf-blender-cvs/2005-June/003769.html (which I in my commithappyness did before properly checking)
2005-06-11 16:30:36 +00:00
&(G.flags), 0, 0, 0, 0, "Automatic keyframe insertion in Object and Action Ipo curves");
Two little issues for Timeline window; - Using Arrowkeys to change frames didn't give proper redraw - Option "Record" now tied to the User-preset "Auto key insert". It is no user preset anymore even, I thought to leave a button in the User- presets for the time being though...
2005-05-05 18:31:39 +00:00
orange: animation baking code. also a patch to autokey, to only key the keys made.
2005-12-18 20:14:22 +00:00
uiDefButBitI(block, TOG, USER_KEYINSERTAVAI, REDRAWTIME, "Available",
(xpos+edgsp+(2*mpref)+(2*midsp)),y1,mpref, buth,
&(U.uiflag), 0, 0, 0, 0, "Automatic keyframe insertion in available curves");
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
/* uiDefButBitS(block, TOG, USER_KEYINSERTACT, 0, "Action",
(xpos+edgsp+(2*mpref)+(2*midsp)),y2,(spref+edgsp),buth,
&(U.uiflag), 0, 0, 0, 0, "Automatic keyframe insertion in Action Ipo curve");
uiDefButBitS(block, TOG, USER_KEYINSERTOBJ, 0, "Object",
(xpos+edgsp+(2*mpref)+(3*midsp)+spref-edgsp),y2,(spref+edgsp),buth,
&(U.uiflag), 0, 0, 0, 0, "Automatic keyframe insertion in Object Ipo curve"); */
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
uiDefBut(block, LABEL,0,"Duplicate with object:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+(2*edgsp)+(3*midsp)+(3*mpref)+spref),y3label,mpref,buth,
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
0, 0, 0, 0, 0, "");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockBeginAlign(block);
uiDefButBitI(block, TOG, USER_DUP_MESH, 0, "Mesh",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(4*midsp)+(3*mpref)+spref),y2,(spref+edgsp),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.dupflag), 0, 0, 0, 0, "Causes mesh data to be duplicated with Shift+D");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_DUP_SURF, 0, "Surface",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(5*midsp)+(3*mpref)+(2*spref)),y2,(spref+edgsp),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.dupflag), 0, 0, 0, 0, "Causes surface data to be duplicated with Shift+D");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_DUP_CURVE, 0, "Curve",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(6*midsp)+(3*mpref)+(3*spref)),y2,(spref+edgsp),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.dupflag), 0, 0, 0, 0, "Causes curve data to be duplicated with Shift+D");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_DUP_FONT, 0, "Text",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(7*midsp)+(3*mpref)+(4*spref)),y2,(spref+edgsp),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.dupflag), 0, 0, 0, 0, "Causes text data to be duplicated with Shift+D");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_DUP_MBALL, 0, "Metaball",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(8*midsp)+(3*mpref)+(5*spref)),y2,(spref+edgsp),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.dupflag), 0, 0, 0, 0, "Causes metaball data to be duplicated with Shift+D");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_DUP_ARM, 0, "Armature",
(xpos+edgsp+(4*midsp)+(3*mpref)+spref),y1,(spref+edgsp),buth,
&(U.dupflag), 0, 0, 0, 0, "Causes armature data to be duplicated with Shift+D");
uiDefButBitI(block, TOG, USER_DUP_LAMP, 0, "Lamp",
(xpos+edgsp+(5*midsp)+(3*mpref)+(2*spref)),y1,(spref+edgsp),buth,
&(U.dupflag), 0, 0, 0, 0, "Causes lamp data to be duplicated with Shift+D");
uiDefButBitI(block, TOG, USER_DUP_MAT, 0, "Material",
(xpos+edgsp+(6*midsp)+(3*mpref)+(3*spref)),y1,(spref+edgsp),buth,
&(U.dupflag), 0, 0, 0, 0, "Causes material data to be duplicated with Shift+D");
uiDefButBitI(block, TOG, USER_DUP_TEX, 0, "Texture",
(xpos+edgsp+(7*midsp)+(3*mpref)+(4*spref)),y1,(spref+edgsp),buth,
&(U.dupflag), 0, 0, 0, 0, "Causes texture data to be duplicated with Shift+D");
uiDefButBitI(block, TOG, USER_DUP_IPO, 0, "Ipo",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(8*midsp)+(3*mpref)+(5*spref)),y1,(spref+edgsp),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.dupflag), 0, 0, 0, 0, "Causes ipo data to be duplicated with Shift+D");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiBlockEndAlign(block);
Editmesh Undo: User Info: Pressing UKey in mesh edit mode now undoes only last step. Undo can save upto 64 steps of undo info. This is configurable under User Prefs-> Edit Methods. The default is 32. High numbers of undo steps use a lot of memory, since each step stores a copy of the mesh. Shift-U redoes the last undone step (Undoes the undo.) Alt-U brings up a menu of possible steps that can be undone. Selecting an item on the list undoes that item plus all items before it on the list. The top selection "Undo All" is identical to the old Ukey. It undoes all editing since entering Editmode, even if all regular undo steps are used up. Undo info is only saved for one object at a time. You can leave and re- enter editmode for the same object, and all undo steps for that object are preserved. Undo info for an object is lost once a different object is edited. Coder Info: In order for undo to work, a checkpoint save has to be made. This is done with a call to undo_push_mesh("name of step"). This should be done after the last quick abort for a function (typ. the "if (G.obedit==0) return;", or similar). the undo_push_mesh() does alter some flags, so don't try to be too tricky and call undo_push_mesh() too late. The step name is what shows up in the undo_menu. The name "U" is reserved.
2003-10-19 20:52:34 +00:00
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
} else if(U.userpref == 2) { /* language & colors */
#ifdef INTERNATIONAL
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
uiDefButBitS(block, TOG, USER_DOTRANSLATE, B_DOLANGUIFONT, "International Fonts",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos,y2,mpref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
&(U.transopts), 0, 0, 0, 0, "Activate international interface");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
if(U.transopts & USER_DOTRANSLATE) {
To end the issues with AA (International) Fonts; the .bfont.tff now is compiled in (datatoc) and doesn't need installation anymore. Also reviewed weird path conventions for searching AA fonts; - U.fontdir is only used as standard search path for fileselecting - U.fontname stores only full path to AA font if used one - If a font cannot be found, it always falls back to the compiled in one - If .B.blend is saved with default font, U.fontname is not set Also added a button in usermenu "restore default". When this works as expected, I'll commit changes for installation too.
2004-11-08 15:46:57 +00:00
char curfont[320];
sprintf(curfont, "Interface Font: ");
if(U.fontname[0]) strcat(curfont, U.fontname);
else strcat(curfont, "Built-in");
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
uiDefBut(block, LABEL,0,curfont,
To end the issues with AA (International) Fonts; the .bfont.tff now is compiled in (datatoc) and doesn't need installation anymore. Also reviewed weird path conventions for searching AA fonts; - U.fontdir is only used as standard search path for fileselecting - U.fontname stores only full path to AA font if used one - If a font cannot be found, it always falls back to the compiled in one - If .B.blend is saved with default font, U.fontname is not set Also added a button in usermenu "restore default". When this works as expected, I'll commit changes for installation too.
2004-11-08 15:46:57 +00:00
(xpos),y3,4*mpref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
0, 0, 0, 0, 0, "");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
uiDefBut(block, BUT, B_LOADUIFONT, "Select Font",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos,y1,mpref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
0, 0, 0, 0, 0, "Select a new font for the interface");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
To end the issues with AA (International) Fonts; the .bfont.tff now is compiled in (datatoc) and doesn't need installation anymore. Also reviewed weird path conventions for searching AA fonts; - U.fontdir is only used as standard search path for fileselecting - U.fontname stores only full path to AA font if used one - If a font cannot be found, it always falls back to the compiled in one - If .B.blend is saved with default font, U.fontname is not set Also added a button in usermenu "restore default". When this works as expected, I'll commit changes for installation too.
2004-11-08 15:46:57 +00:00
uiDefButI(block, BUT, B_RESTOREFONT, "Restore to default",
(xpos+edgsp+mpref+midsp),y2,mpref,buth,
&U.fontsize, 0, 0, 0, 0, "Restores to using the default included antialised font");
- modify CCG to not crash when passed invalid faces, just ignores that face... this situation should still not happen with well written modifiers but at least it won't crash now - bug fix in mirror modifier, calculation during editmode did not check to make sure built mface's had valid indices... grr the ==0 tagging system is really a pain. - convert a few uiDefBut calls to use explicit type
2005-08-03 19:27:19 +00:00
uiDefButI(block, MENU, B_SETFONTSIZE, fontsize_pup(),
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+midsp),y1,mpref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
&U.fontsize, 0, 0, 0, 0, "Current interface font size (points)");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
/*
- modify CCG to not crash when passed invalid faces, just ignores that face... this situation should still not happen with well written modifiers but at least it won't crash now - bug fix in mirror modifier, calculation during editmode did not check to make sure built mface's had valid indices... grr the ==0 tagging system is really a pain. - convert a few uiDefBut calls to use explicit type
2005-08-03 19:27:19 +00:00
uiDefButS(block, MENU, B_SETENCODING, encoding_pup(),
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+midsp),y1,mpref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
&U.encoding, 0, 0, 0, 0, "Current interface font encoding");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
uiDefBut(block, LABEL,0,"Translate:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2.1*mpref)+(2*midsp)),y3label,mpref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
0, 0, 0, 0, 0, "");
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
*/
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
uiDefButBitS(block, TOG, USER_TR_TOOLTIPS, B_SETTRANSBUTS, "Tooltips",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2.2*mpref)+(3*midsp)),y1,spref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
&(U.transopts), 0, 0, 0, 0, "Translate tooltips");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
uiDefButBitS(block, TOG, USER_TR_BUTTONS, B_SETTRANSBUTS, "Buttons",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2.2*mpref)+(4*midsp)+spref),y1,spref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
&(U.transopts), 0, 0, 0, 0, "Translate button labels");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
uiDefButBitS(block, TOG, USER_TR_MENUS, B_SETTRANSBUTS, "Toolbox",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2.2*mpref)+(5*midsp)+(2*spref)),y1,spref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
&(U.transopts), 0, 0, 0, 0, "Translate toolbox menu");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
- modify CCG to not crash when passed invalid faces, just ignores that face... this situation should still not happen with well written modifiers but at least it won't crash now - bug fix in mirror modifier, calculation during editmode did not check to make sure built mface's had valid indices... grr the ==0 tagging system is really a pain. - convert a few uiDefBut calls to use explicit type
2005-08-03 19:27:19 +00:00
uiDefButI(block, MENU, B_SETLANGUAGE, language_pup(),
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2.2*mpref)+(3*midsp)),y2,mpref+(0.5*mpref)+3,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
&U.language, 0, 0, 0, 0, "Select interface language");
Added experimental option to use GL textured interface fonts. Set preferred method in userprefs->language & font. Kinda requested by Kaito, i'm sure he regrets after seeing my code changes. This commit includes a patch provided by Jacques Baurain, which seemed nescessary to handle font sizing properly. Thank you !
2005-01-19 13:53:43 +00:00
uiDefButBitS(block, TOG, USER_USETEXTUREFONT, B_USETEXTUREFONT, "Use Textured Fonts",
(xpos+edgsp+(4*mpref)+(4*midsp)),y2,mpref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
&(U.transopts), 0, 0, 0, 0,
Added experimental option to use GL textured interface fonts. Set preferred method in userprefs->language & font. Kinda requested by Kaito, i'm sure he regrets after seeing my code changes. This commit includes a patch provided by Jacques Baurain, which seemed nescessary to handle font sizing properly. Thank you !
2005-01-19 13:53:43 +00:00
"Use Textured Fonts");
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
}
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
/* end of INTERNATIONAL */
#endif
} else if(U.userpref == 3) { /* auto save */
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiDefButS(block, NUM, 0, "Save Versions:",
(xpos+edgsp),y3,mpref,buth,
&U.versions, 0.0, 32.0, 0, 0,
"The number of old versions to maintain in the current directory, when manually saving");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_AUTOSAVE, B_RESETAUTOSAVE, "Auto Save Temp Files",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+midsp),y3,mpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.flag), 0, 0, 0, 0,
"Enables automatic saving of temporary files");
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
if(U.flag & USER_AUTOSAVE) {
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
uiDefButI(block, NUM, B_RESETAUTOSAVE, "Minutes:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+mpref+midsp),y2,mpref,buth,
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
&(U.savetime), 1.0, 60.0, 0, 0,
"The time (in minutes) to wait between automatic temporary saves");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiDefBut(block, BUT, B_LOADTEMP, "Open Recent",
(xpos+edgsp+mpref+midsp),y1,mpref,buth,
0, 0, 0, 0, 0,"Open the most recently saved temporary file");
Multilingual interface support added. All modifications are behind compileflag INTERNATIONAL, and affect these two directories; source/blender/src and source/blender/ftfont. Thanks to philipp, a new utf8towchar() function is added to Shizu's work, which fixes the international support for OSX. It also makes the iconv library obsolete. This means all translation files (blender.mo) need to be 'recoded' to UTF-8, and language support in the fileselect window and the text editor is not possible. Iconv might be added in the future to enable these features.
2003-05-03 12:17:11 +00:00
}
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
} else if (U.userpref == 4) { /* system & opengl */
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
uiDefBut(block, LABEL,0,"Solid OpenGL light:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp, y3label, mpref, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
0, 0, 0, 0, 0, "");
Fixed a problem with button alignment I added a while ago. Added button allignment to sequencer, ogl light prefs some areas of the fluidsim
2006-05-14 08:49:10 +00:00
uiBlockBeginAlign(block);
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
uiDefButS(block, MENU, B_REDR, "Light1 %x0|Light2 %x1|Light3 %x2",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp, y2, 2*mpref/6, buth, &cur_light, 0.0, 0.0, 0, 0, "");
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
uiBlockSetCol(block, TH_BUT_SETTING1);
- got rid of silly #define ..._BIT, #define ... (1<<..._BIT) stuff - switched almost all uiDefBut(..., TOG|BIT|..) to use UiDefButBit and the name of the actual bit define instead of just a magic constant, this makes searching the code much nicer. most of the credit here goes to LetterRip who did almost all of the conversions, I mostly just checked them over.
2005-08-03 18:48:22 +00:00
uiDefButBitI(block, TOG, 1, B_RECALCLIGHT, "On",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+2*mpref/6, y2, mpref/6, buth,
- Fix for #1726, the convex() function is smarter now, checking on valid trias to test in quad PLus: - Add undo-push after 'assign material' in curve editmode, plus redraw to reflect material change - Added tooltips for opengl light buttons in user presets - Added correct buttons window redraw for armature selecting in editmode
2004-11-01 17:03:05 +00:00
&U.light[cur_light].flag, 0.0, 0.0, 0, 0, "Enable this OpenGL light in Solid draw mode");
Fixed a problem with button alignment I added a while ago. Added button allignment to sequencer, ogl light prefs some areas of the fluidsim
2006-05-14 08:49:10 +00:00
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
uiBlockSetCol(block, TH_AUTO);
uiDefButS(block, ROW, B_REDR, "Vec",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+3*mpref/6, y2, mpref/6, buth,
- Fix for #1726, the convex() function is smarter now, checking on valid trias to test in quad PLus: - Add undo-push after 'assign material' in curve editmode, plus redraw to reflect material change - Added tooltips for opengl light buttons in user presets - Added correct buttons window redraw for armature selecting in editmode
2004-11-01 17:03:05 +00:00
&cur_light_var, 123.0, 0.0, 0, 0, "Lamp vector for OpenGL light");
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
uiDefButS(block, ROW, B_REDR, "Col",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+4*mpref/6, y2, mpref/6, buth,
- Fix for #1726, the convex() function is smarter now, checking on valid trias to test in quad PLus: - Add undo-push after 'assign material' in curve editmode, plus redraw to reflect material change - Added tooltips for opengl light buttons in user presets - Added correct buttons window redraw for armature selecting in editmode
2004-11-01 17:03:05 +00:00
&cur_light_var, 123.0, 1.0, 0, 0, "Diffuse Color for OpenGL light");
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
uiDefButS(block, ROW, B_REDR, "Spec",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+5*mpref/6, y2, mpref/6, buth,
- Fix for #1726, the convex() function is smarter now, checking on valid trias to test in quad PLus: - Add undo-push after 'assign material' in curve editmode, plus redraw to reflect material change - Added tooltips for opengl light buttons in user presets - Added correct buttons window redraw for armature selecting in editmode
2004-11-01 17:03:05 +00:00
&cur_light_var, 123.0, 2.0, 0, 0, "Specular color for OpenGL light");
Fixed a problem with button alignment I added a while ago. Added button allignment to sequencer, ogl light prefs some areas of the fluidsim
2006-05-14 08:49:10 +00:00
uiBlockEndAlign(block);
uiBlockBeginAlign(block);
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
if(cur_light_var==1) {
uiDefButF(block, NUM, B_RECALCLIGHT, "R ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp, y1, mpref/3, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
U.light[cur_light].col, 0.0, 1.0, 100, 2, "");
uiDefButF(block, NUM, B_RECALCLIGHT, "G ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+mpref/3, y1, mpref/3, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
U.light[cur_light].col+1, 0.0, 1.0, 100, 2, "");
uiDefButF(block, NUM, B_RECALCLIGHT, "B ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+2*mpref/3, y1, mpref/3, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
U.light[cur_light].col+2, 0.0, 1.0, 100, 2, "");
}
else if(cur_light_var==2) {
uiDefButF(block, NUM, B_RECALCLIGHT, "sR ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp, y1, mpref/3, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
U.light[cur_light].spec, 0.0, 1.0, 100, 2, "");
uiDefButF(block, NUM, B_RECALCLIGHT, "sG ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+mpref/3, y1, mpref/3, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
U.light[cur_light].spec+1, 0.0, 1.0, 100, 2, "");
uiDefButF(block, NUM, B_RECALCLIGHT, "sB ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+2*mpref/3, y1, mpref/3, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
U.light[cur_light].spec+2, 0.0, 1.0, 100, 2, "");
}
else if(cur_light_var==0) {
uiDefButF(block, NUM, B_RECALCLIGHT, "X ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp, y1, mpref/3, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
U.light[cur_light].vec, -1.0, 1.0, 100, 2, "");
uiDefButF(block, NUM, B_RECALCLIGHT, "Y ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+mpref/3, y1, mpref/3, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
U.light[cur_light].vec+1, -1.0, 1.0, 100, 2, "");
uiDefButF(block, NUM, B_RECALCLIGHT, "Z ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
xpos+edgsp+2*mpref/3, y1, mpref/3, buth,
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
U.light[cur_light].vec+2, -1.0, 1.0, 100, 2, "");
}
Fixed a problem with button alignment I added a while ago. Added button allignment to sequencer, ogl light prefs some areas of the fluidsim
2006-05-14 08:49:10 +00:00
uiBlockEndAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
/*
- got rid of silly #define ..._BIT, #define ... (1<<..._BIT) stuff - switched almost all uiDefBut(..., TOG|BIT|..) to use UiDefButBit and the name of the actual bit define instead of just a magic constant, this makes searching the code much nicer. most of the credit here goes to LetterRip who did almost all of the conversions, I mostly just checked them over.
2005-08-03 18:48:22 +00:00
uiDefButBitS(block, TOG, USER_EVTTOCONSOLE, 0, "Log Events to Console",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp),y2,lpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.uiflag), 0, 0, 0, 0, "Display a list of input events in the console");
- modify CCG to not crash when passed invalid faces, just ignores that face... this situation should still not happen with well written modifiers but at least it won't crash now - bug fix in mirror modifier, calculation during editmode did not check to make sure built mface's had valid indices... grr the ==0 tagging system is really a pain. - convert a few uiDefBut calls to use explicit type
2005-08-03 19:27:19 +00:00
uiDefButS(block, MENU, B_CONSOLEOUT, consolemethod_pup(),
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp), y1, lpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&U.console_out, 0, 0, 0, 0, "Select console output method");
uiDefButS(block, NUM, B_CONSOLENUMLINES, "Lines:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+lpref+midsp),y1,spref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&U.console_buffer, 1.0, 4000.0, 0, 0, "Maximum number of internal console lines");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
*/
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
#ifdef _WIN32
uiDefBut(block, LABEL,0,"Win Codecs:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(1*midsp)+(1*mpref)),y3label,mpref,buth,
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
0, 0, 0, 0, 0, "");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_ALLWINCODECS, 0, "Enable all codecs",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(1*mpref)+(1*midsp)),y2,mpref,buth,
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
&(U.uiflag), 0, 0, 0, 0, "Allows all codecs for rendering (not guaranteed)");
#endif
uiDefBut(block, LABEL,0,"Keyboard:",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(3*midsp)+(3*mpref)),y3label,mpref,buth,
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
0, 0, 0, 0, 0, "");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_NO_CAPSLOCK, B_U_CAPSLOCK, "Disable Caps Lock",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(3*midsp)+(3*mpref)),y1,mpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.flag), 0, 0, 0, 0,
"Disables the Caps Lock key when entering text");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_NONUMPAD, 0, "Emulate Numpad",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(3*midsp)+(3*mpref)),y2,mpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.flag), 0, 0, 0, 0,
"Causes the 1 to 0 keys to act as the numpad (useful for laptops)");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
uiDefBut(block, LABEL,0,"System:",
* Adds configuration buttons for ffmpeg-output * Large sequencer rewrite to support: - Audio-tracks, which are not completely loaded into memory (hdaudio) but kept on disk instead. - A dependency tree, that builds only the Imbufs, that are really needed - Cleaner sequencer code - Per instance data in sequencer plugins (without this, the Dynamic Noise Reduction plugin would be impossible) - A Luma Waveform display - A U/V scatter plot display - Memcache limiting in sequencer - Buttons changed according to the boosted framecount limit
2006-02-05 19:30:37 +00:00
(xpos+edgsp+(4*midsp)+(4*mpref)),y6label,mpref,buth,
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
0, 0, 0, 0, 0, "");
* Adds configuration buttons for ffmpeg-output * Large sequencer rewrite to support: - Audio-tracks, which are not completely loaded into memory (hdaudio) but kept on disk instead. - A dependency tree, that builds only the Imbufs, that are really needed - Cleaner sequencer code - Per instance data in sequencer plugins (without this, the Dynamic Noise Reduction plugin would be impossible) - A Luma Waveform display - A U/V scatter plot display - Memcache limiting in sequencer - Buttons changed according to the boosted framecount limit
2006-02-05 19:30:37 +00:00
uiDefButI(block, NUM, B_MEMCACHELIMIT, "MEM Cache Limit ",
(xpos+edgsp+(4*mpref)+(4*midsp)), y5, mpref, buth,
&U.memcachelimit, 0.0, 1024.0, 30, 2,
"Memory cache limit in sequencer");
uiDefButS(block, NUM, B_REDR, "Frameserver Port ",
(xpos+edgsp+(4*mpref)+(4*midsp)), y4, mpref, buth,
&U.frameserverport, 0.0, 32727.0, 30, 2,
"Frameserver Port for Framserver-Rendering");
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
Bug fix #2394 While in camera view, going to local axis rotation (R, X, X) the view became instable. Was still using the view3d view matrix, instead of initialized TransInfo->viewmat. Martin; you could check on the mouse motion in this case, for some reason it only uses horizontal motion? ALso; renamed button in InfoWindow "Disable sound" to "Disable Game Sound".
2005-04-12 10:08:04 +00:00
uiDefButBitI(block, TOG, USER_DISABLE_SOUND, B_SOUNDTOGGLE, "Disable Game Sound",
Hide .file blocks in databrowse/pop menu. This is mainly useful for scripts that generate/load datablocks for their own use and don't want to burry the user under an avalanche of datablocks he/she doesn't care about. This adds a user pref "Hide .data" which now acts as a default value when opening a new fileselector. It is also used when creating data select pop menus. The "ghost" button in a fileselect window is independant from the userpref. It can be turned on/off individually without affecting Note: When turning the option on/off, it sometimes take a couple of times before the pop menu registers it. Probably some caching thing. Will have to look at it. Default value is Off.
2005-07-11 23:49:06 +00:00
(xpos+edgsp+(4*mpref)+(4*midsp)),y3,mpref,buth,
Bug fix #2394 While in camera view, going to local axis rotation (R, X, X) the view became instable. Was still using the view3d view matrix, instead of initialized TransInfo->viewmat. Martin; you could check on the mouse motion in this case, for some reason it only uses horizontal motion? ALso; renamed button in InfoWindow "Disable sound" to "Disable Game Sound".
2005-04-12 10:08:04 +00:00
&(U.gameflags), 0, 0, 0, 0, "Disables sounds from being played in games");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButBitI(block, TOG, USER_FILTERFILEEXTS, 0, "Filter File Extensions",
Hide .file blocks in databrowse/pop menu. This is mainly useful for scripts that generate/load datablocks for their own use and don't want to burry the user under an avalanche of datablocks he/she doesn't care about. This adds a user pref "Hide .data" which now acts as a default value when opening a new fileselector. It is also used when creating data select pop menus. The "ghost" button in a fileselect window is independant from the userpref. It can be turned on/off individually without affecting Note: When turning the option on/off, it sometimes take a couple of times before the pop menu registers it. Probably some caching thing. Will have to look at it. Default value is Off.
2005-07-11 23:49:06 +00:00
(xpos+edgsp+(4*mpref)+(4*midsp)),y2,mpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.uiflag), 0, 0, 0, 0, "Display only files with extensions in the image select window");
Hide .file blocks in databrowse/pop menu. This is mainly useful for scripts that generate/load datablocks for their own use and don't want to burry the user under an avalanche of datablocks he/she doesn't care about. This adds a user pref "Hide .data" which now acts as a default value when opening a new fileselector. It is also used when creating data select pop menus. The "ghost" button in a fileselect window is independant from the userpref. It can be turned on/off individually without affecting Note: When turning the option on/off, it sometimes take a couple of times before the pop menu registers it. Probably some caching thing. Will have to look at it. Default value is Off.
2005-07-11 23:49:06 +00:00
uiDefButBitI(block, TOG, USER_HIDE_DOT, 0, "Hide dot file/datablock",
(xpos+edgsp+(4*mpref)+(4*midsp)),y1,mpref,buth,
&(U.uiflag), 0, 0, 0, 0, "Hide files/datablocks that start with a dot(.*)");
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
uiDefBut(block, LABEL,0,"OpenGL:",
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
(xpos+edgsp+(5*midsp)+(5*mpref)),y5label,mpref,buth,
modified userprefs layout. modified linenumber display. for Win32: added display of framenumber in titlebar of animwindow. added userpref that enables all codecs for rendering.
2003-05-11 23:28:32 +00:00
0, 0, 0, 0, 0, "");
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
uiDefButBitI(block, TOGN, USER_DISABLE_MIPMAP, B_MIPMAPCHANGED, "Mipmaps",
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
(xpos+edgsp+(5*mpref)+(5*midsp)),y4,mpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.gameflags), 0, 0, 0, 0, "Toggles between mipmap textures on (beautiful) and off (fast)");
Converted the Userpreference buttons to zr's new ButBit calls. Also added USER_* to each define located in DNA_userdef.h.
2004-01-13 14:50:45 +00:00
uiDefButBitI(block, TOG, USER_VERTEX_ARRAYS, 0, "Vertex Arrays",
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
(xpos+edgsp+(5*mpref)+(5*midsp)),y3,mpref,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
&(U.gameflags), 0, 0, 0, 0, "Toggles between vertex arrays on (less reliable) and off (more reliable)");
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
uiDefButI(block, NUM, 0, "Time Out ",
(xpos+edgsp+(5*mpref)+(5*midsp)), y2, mpref, buth,
&U.textimeout, 0.0, 3600.0, 30, 2, "Time since last access of a GL texture in seconds after which it is freed. (Set to 0 to keep textures allocated)");
uiDefButI(block, NUM, 0, "Collect Rate ",
(xpos+edgsp+(5*mpref)+(5*midsp)), y1, mpref, buth,
&U.texcollectrate, 1.0, 3600.0, 30, 2, "Number of seconds between each run of the GL texture garbage collector.");
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiDefBut(block, LABEL,0,"Audio mixing buffer:",
(xpos+edgsp+(2*midsp)+(2*mpref)),y3label,mpref,buth,
Commit message and the brunt of the code courtesy of intrr, apologies for the size of this; Finally, the Sequencer audio support and global audio/animation sync stuff! (See http://intrr.org/blender/audiosequencer.html) Stuff that has been done: ./source/blender/blenloader/intern/writefile.c ./source/blender/blenloader/intern/readfile.c Added code to make it handle sounds used by audio strips, and to convert Scene data from older (<2.28) versions to init Scene global audio settings (Scene->audio) to defaults. ./source/blender/include/BSE_seqaudio.h ./source/blender/src/seqaudio.c The main audio routines that start/stop/scrub the audio stream at a certain frame position, provide the frame reference for the current stream position, mix the audio, convert the audio, mixdown the audio into a file. ./source/blender/makesdna/DNA_sound_types.h Introduced new variables in the bSound struct to accomodate the sample data after converted to the scene's global mixing format (stream, streamlen). Also added a new flag SOUND_FLAGS_SEQUENCE that gets set if the Sound belongs to a sequence strip. ./source/blender/makesdna/DNA_scene_types.h Added AudioData struct, which holds scene-global audio settings. ./source/blender/makesdna/DNA_sequence_types.h Added support for audio strips. Some variables to hold Panning/Attenuation information, position information, reference to the sample, and some flags. ./source/blender/makesdna/DNA_userdef_types.h ./source/blender/src/usiblender.c Added a "Mixing buffer size" userpref. Made the versions stuff initialize it to a default for versions <2.28. ./source/blender/makesdna/DNA_space_types.h ./source/blender/src/filesel.c Added a Cyan dot to .WAV files. Any other suggestions on a better color? :) ./source/blender/src/editsound.c Changes (fixes) to the WAV file loader, re-enabled some gameengine code that is needed for dealing with bSounds and bSamples. ./source/blender/src/editipo.c ./source/blender/src/drawseq.c ./source/blender/src/editnla.c ./source/blender/src/space.c ./source/blender/src/drawview.c ./source/blender/src/renderwin.c ./source/blender/src/headerbuttons.c - Created two different wrappers for update_for_newframe(), one which scrubs the audio, one which doesn't. - Replaced some of the occurences of update_for_newframe() with update_for_newframe_muted(), which doesn't scrub the audio. - In drawview.c: Changed the synchronization scheme to get the current audio position from the audio engine, and use that as a reference for setting CFRA. Implements a/v sync and framedrop. - In editipo.c: Changed handling of Fac IPOs to be usable for audio strips as volume envelopes. - In space.c: Added the mixing buffer size Userpref, enabled audio scrubbing (update_for_newframe()) for moving the sequence editor framebar. ./source/blender/src/editseq.c Added support for audio strips and a default directory for WAV files which gets saved from the last Shift-A operation. ./source/blender/src/buttons.c Added Scene-global audio sequencer settings in Sound buttons. ./source/blender/src/sequence.c Various stuff that deals with handling audio strips differently than usual strips.
2003-07-13 20:16:56 +00:00
0, 0, 0, 0, 0, "");
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
uiBlockBeginAlign(block);
uiDefButI(block, ROW, 0, "256",
(xpos+edgsp+(2*midsp)+(2*mpref)),y2,(mpref/4),buth,
&U.mixbufsize, 2.0, 256.0, 0, 0, "Set audio mixing buffer size to 256 samples");
uiDefButI(block, ROW, 0, "512",
(xpos+edgsp+(2*midsp)+(2*mpref)+(mpref/4)),y2,(mpref/4),buth,
&U.mixbufsize, 2.0, 512.0, 0, 0, "Set audio mixing buffer size to 512 samples");
uiDefButI(block, ROW, 0, "1024",
(xpos+edgsp+(2*midsp)+(2*mpref)+(2*mpref/4)),y2,(mpref/4),buth,
&U.mixbufsize, 2.0, 1024.0, 0, 0, "Set audio mixing buffer size to 1024 samples");
uiDefButI(block, ROW, 0, "2048",
(xpos+edgsp+(2*midsp)+(2*mpref)+(3*mpref/4)),y2,(mpref/4),buth,
&U.mixbufsize, 2.0, 2048.0, 0, 0, "Set audio mixing buffer size to 2048 samples");
uiBlockEndAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
} else if(U.userpref == 5) { /* file paths */
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
Eeshlo fixed the iYFexport path problem and added a file selector button for it. Now win32 users should have less problems. I added export of the "no shadow" flag (traceable) And changed the reflection export scheme so now blender's RayMir is used as yafray's min_refle and the amount of reflection is controled by the mir color. This seems more intuitive. And now IOR is exported also for reflection only, wich is needed for fresnel.
2004-01-06 12:28:31 +00:00
/* yafray: (temporary) path button for yafray xml export, now with fileselect */
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockBeginAlign(block);
Basic initial yafray integration by Eeshlo. Materials are exported the best we can do by now. It will look almost as in blender except for the missing procedural textures and some minor issues. You have to tweak normal modulation amount to get the desired result cause is not the same in yafray. We added a panel in render space to adjust some yafray settings (GI and so) Also we export transparency and reflection using new raytracing settings, but that will be changed and improved soon. Remember that you have to set YFexport path in user defaults and yafray must be on path (version 0.0.6) We added the "yafray" button to activate all this stuff in the render window. Panel and settings are only shown when checked. So now when activated the code calls yafray export instead of the internal renderer and finally the resulting image is loaded back into render window's buffer. So animation is also possible and results can be saved using blender usual scheme.
2004-01-04 22:10:36 +00:00
uiDefBut(block, TEX, 0, "YFexport: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp), y2+buth+rspace, lpref-smfileselbut, buth,
Basic initial yafray integration by Eeshlo. Materials are exported the best we can do by now. It will look almost as in blender except for the missing procedural textures and some minor issues. You have to tweak normal modulation amount to get the desired result cause is not the same in yafray. We added a panel in render space to adjust some yafray settings (GI and so) Also we export transparency and reflection using new raytracing settings, but that will be changed and improved soon. Remember that you have to set YFexport path in user defaults and yafray must be on path (version 0.0.6) We added the "yafray" button to activate all this stuff in the render window. Panel and settings are only shown when checked. So now when activated the code calls yafray export instead of the internal renderer and finally the resulting image is loaded back into render window's buffer. So animation is also possible and results can be saved using blender usual scheme.
2004-01-04 22:10:36 +00:00
U.yfexportdir, 1.0, 63.0, 0, 0,
"The default directory for yafray xml export (must exist!)");
Eeshlo fixed the iYFexport path problem and added a file selector button for it. Now win32 users should have less problems. I added export of the "no shadow" flag (traceable) And changed the reflection export scheme so now blender's RayMir is used as yafray's min_refle and the amount of reflection is controled by the mir color. This seems more intuitive. And now IOR is exported also for reflection only, wich is needed for fresnel.
2004-01-06 12:28:31 +00:00
uiDefIconBut(block, BUT, B_YAFRAYDIRFILESEL, ICON_FILESEL,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+lpref-smfileselbut), y2+buth+rspace, smfileselbut, buth,
Eeshlo fixed the iYFexport path problem and added a file selector button for it. Now win32 users should have less problems. I added export of the "no shadow" flag (traceable) And changed the reflection export scheme so now blender's RayMir is used as yafray's min_refle and the amount of reflection is controled by the mir color. This seems more intuitive. And now IOR is exported also for reflection only, wich is needed for fresnel.
2004-01-06 12:28:31 +00:00
0, 0, 0, 0, 0, "Select the default yafray export directory");
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockEndAlign(block);
uiBlockBeginAlign(block);
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefBut(block, TEX, 0, "Fonts: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp),y2,(lpref-smfileselbut),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
U.fontdir, 1.0, 63.0, 0, 0,
"The default directory to search for loading fonts");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefIconBut(block, BUT, B_FONTDIRFILESEL, ICON_FILESEL,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+lpref-smfileselbut),y2,smfileselbut,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
0, 0, 0, 0, 0, "Select the default font directory");
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockEndAlign(block);
uiBlockBeginAlign(block);
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefBut(block, TEX, 0, "Textures: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+lpref+midsp),y2,(lpref-smfileselbut),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
U.textudir, 1.0, 63.0, 0, 0, "The default directory to search for textures");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefIconBut(block, BUT, B_TEXTUDIRFILESEL, ICON_FILESEL,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2*lpref)+midsp-smfileselbut),y2,smfileselbut,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
0, 0, 0, 0, 0, "Select the default texture location");
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockEndAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockBeginAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
uiDefBut(block, TEX, 0, "Tex Plugins: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2*lpref)+(2*midsp)),y2,(lpref-smfileselbut),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
U.plugtexdir, 1.0, 63.0, 0, 0, "The default directory to search for texture plugins");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefIconBut(block, BUT, B_PLUGTEXDIRFILESEL, ICON_FILESEL,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(3*lpref)+(2*midsp)-smfileselbut),y2,smfileselbut,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
0, 0, 0, 0, 0, "Select the default texture plugin location");
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockEndAlign(block);
uiBlockBeginAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
uiDefBut(block, TEX, 0, "Seq Plugins: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(3*lpref)+(3*midsp)),y2,(lpref-smfileselbut),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
U.plugseqdir, 1.0, 63.0, 0, 0, "The default directory to search for sequence plugins");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefIconBut(block, BUT, B_PLUGSEQDIRFILESEL, ICON_FILESEL,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(4*lpref)+(3*midsp)-smfileselbut),y2,smfileselbut,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
0, 0, 0, 0, 0, "Select the default sequence plugin location");
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockEndAlign(block);
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockBeginAlign(block);
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefBut(block, TEX, 0, "Render: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp),y1,(lpref-smfileselbut),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
U.renderdir, 1.0, 63.0, 0, 0, "The default directory for rendering output");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefIconBut(block, BUT, B_RENDERDIRFILESEL, ICON_FILESEL,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+lpref-smfileselbut),y1,smfileselbut,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
0, 0, 0, 0, 0, "Select the default render output location");
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockEndAlign(block);
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockBeginAlign(block);
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefBut(block, TEX, 0, "Python: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+lpref+midsp),y1,(lpref-2*smfileselbut),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
U.pythondir, 1.0, 63.0, 0, 0, "The default directory to search for Python scripts");
Scripts menus: -- added re-eval entry to Scripts Win -> Scripts menu -- added it also as a button at Info Win -> File Paths, Python path -- updated bpymenus code: added 'Blender' tag, for version; made a .Bpymenus file be written only if there's actual data to save made file->export menu open a scriptspace only if none is available already -- bug fixes (bugs 866 and 879, related) for linking and sharing mesh data: http://projects.blender.org/tracker/?func=detail&atid=125&aid=866&group_id=9 http://projects.blender.org/tracker/?func=detail&atid=125&aid=879&group_id=9
2004-01-16 23:40:14 +00:00
uiDefIconBut(block, BUT, B_PYMENUEVAL, ICON_SCRIPT,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2*lpref)+midsp-2*smfileselbut),y1,smfileselbut,buth,
Scripts menus: -- added re-eval entry to Scripts Win -> Scripts menu -- added it also as a button at Info Win -> File Paths, Python path -- updated bpymenus code: added 'Blender' tag, for version; made a .Bpymenus file be written only if there's actual data to save made file->export menu open a scriptspace only if none is available already -- bug fixes (bugs 866 and 879, related) for linking and sharing mesh data: http://projects.blender.org/tracker/?func=detail&atid=125&aid=866&group_id=9 http://projects.blender.org/tracker/?func=detail&atid=125&aid=879&group_id=9
2004-01-16 23:40:14 +00:00
0, 0, 0, 0, 0, "Re-evaluate scripts registration in menus");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefIconBut(block, BUT, B_PYTHONDIRFILESEL, ICON_FILESEL,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2*lpref)+midsp-smfileselbut),y1,smfileselbut,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
0, 0, 0, 0, 0, "Select the default Python script location");
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockEndAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockBeginAlign(block);
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefBut(block, TEX, 0, "Sounds: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(2*lpref)+(2*midsp)),y1,(lpref-smfileselbut),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
U.sounddir, 1.0, 63.0, 0, 0, "The default directory to search for sounds");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefIconBut(block, BUT, B_SOUNDDIRFILESEL, ICON_FILESEL,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(3*lpref)+(2*midsp)-smfileselbut),y1,smfileselbut,buth,
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
0, 0, 0, 0, 0, "Selet the default sound location");
uiBlockEndAlign(block);
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockBeginAlign(block);
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefBut(block, TEX, 0, "Temp: ",
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(3*lpref)+(3*midsp)),y1,(lpref-smfileselbut),buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
U.tempdir, 1.0, 63.0, 0, 0, "The directory for storing temporary save files");
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
uiDefIconBut(block, BUT, B_TEMPDIRFILESEL, ICON_FILESEL,
Cleaned up the User Prefs layout. More ordered, descriptive, and better room for growth.
2004-07-24 16:43:16 +00:00
(xpos+edgsp+(4*lpref)+(3*midsp)-smfileselbut),y1,smfileselbut,buth,
Matt Ebb finished the userprefs window layout
2003-05-01 12:50:49 +00:00
0, 0, 0, 0, 0, "Select the default temporary save file location");
last of the cosmetic fixes with aligning buttons in the path setting/info win prefs area.
2006-01-15 14:47:16 +00:00
uiBlockEndAlign(block);
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
uiDrawBlock(block);
huge commit, sorry! this is part 1 of the UI makeover. It has: - menu system from Matt integrated - buttons drawing from Matt - generic button panel system implemented - converted displaybuttons (not the rest yet) - cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact. - cleaned loads of little compiler warnings, protos... still a lot of work needed, will all be in next week i hope! (warn: 2 new c files! butspace.c and buttons_scene.c)
2003-10-04 20:35:50 +00:00
- removed temporal patch from myortho2() in mywindow.c, and changed all calls to ortho2 with correctness offset of 0.375 instead of 0.5. this efficiently solves bug in drawing UV lines as reported. cvS: ----------------------------------------------------------------------
2003-11-18 11:22:17 +00:00
myortho2(-0.375, (float)(sa->winx)-0.375, -0.375, (float)(sa->winy)-0.375);
huge commit, sorry! this is part 1 of the UI makeover. It has: - menu system from Matt integrated - buttons drawing from Matt - generic button panel system implemented - converted displaybuttons (not the rest yet) - cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact. - cleaned loads of little compiler warnings, protos... still a lot of work needed, will all be in next week i hope! (warn: 2 new c files! butspace.c and buttons_scene.c)
2003-10-04 20:35:50 +00:00
draw_area_emboss(sa);
Bug fix #1946 Editmode Mesh, edge selectmode, not zbuffer on. Selecting edges didnt give a small disadvantage to the already selected one, making it hard to select edges that are extreme close or on top of each other.
2004-12-03 18:04:33 +00:00
/* restore buttons transform */
if(curarea->winx<=1280.0) {
fac= ((float)curarea->winx)/1280.0f;
myortho2(0.0, 1280.0, 0.0, curarea->winy/fac);
}
else {
myortho2(0.0, (float)curarea->winx, 0.0, (float)curarea->winy);
}
huge commit, sorry! this is part 1 of the UI makeover. It has: - menu system from Matt integrated - buttons drawing from Matt - generic button panel system implemented - converted displaybuttons (not the rest yet) - cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact. - cleaned loads of little compiler warnings, protos... still a lot of work needed, will all be in next week i hope! (warn: 2 new c files! butspace.c and buttons_scene.c)
2003-10-04 20:35:50 +00:00
sa->win_swap= WIN_BACK_OK;
Initial revision
2002-10-12 11:37:38 +00:00
}
Added rename/delete popups to the file and imageselect windows. Redesigned the userpreference window layout. (not finished yet) Enhanced the texteditor with; a rightmousemenu, clipboard text support (for windows !) and the alt-m keystroke generates a 3d text object. (up to 1000 characters) (1, 2, 3, 4 and 7 from http://www.tncci.com/blender/feats.html)
2003-04-28 11:17:21 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void winqreadinfospace(ScrArea *sa, void *spacedata, BWinEvent *evt)
Initial revision
2002-10-12 11:37:38 +00:00
{
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
unsigned short event= evt->event;
short val= evt->val;
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
if(val) {
if( uiDoBlocks(&curarea->uiblocks, event)!=UI_NOTHING ) event= 0;
switch(event) {
case UI_BUT_EVENT:
Two little issues for Timeline window; - Using Arrowkeys to change frames didn't give proper redraw - Option "Record" now tied to the User-preset "Auto key insert". It is no user preset anymore even, I thought to leave a button in the User- presets for the time being though...
2005-05-05 18:31:39 +00:00
if(val==REDRAWTIME) allqueue(REDRAWTIME, 0);
else if(val==B_ADD_THEME) {
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
bTheme *btheme, *new;
btheme= U.themes.first;
new= MEM_callocN(sizeof(bTheme), "theme");
memcpy(new, btheme, sizeof(bTheme));
BLI_addhead(&U.themes, new);
strcpy(new->name, "New User Theme");
addqueue(sa->win, REDRAW, 1);
}
else if(val==B_DEL_THEME) {
bTheme *btheme= U.themes.first;
BLI_remlink(&U.themes, btheme);
MEM_freeN(btheme);
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
BIF_SetTheme(sa); /* prevent usage of old theme in calls */
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
addqueue(sa->win, REDRAW, 1);
}
else if(val==B_NAME_THEME) {
bTheme *btheme= U.themes.first;
if(strcmp(btheme->name, "Default")==0) {
strcpy(btheme->name, "New User Theme");
addqueue(sa->win, REDRAW, 1);
}
}
else if(val==B_UPDATE_THEME) {
allqueue(REDRAWALL, 0);
}
else if(val==B_CHANGE_THEME) {
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
th_curcol= TH_BACK; /* backdrop color is always there... */
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
addqueue(sa->win, REDRAW, 1);
}
else if(val==B_THEME_COPY) {
if(th_curcol_ptr) {
th_curcol_arr[0]= th_curcol_ptr[0];
th_curcol_arr[1]= th_curcol_ptr[1];
th_curcol_arr[2]= th_curcol_ptr[2];
th_curcol_arr[3]= th_curcol_ptr[3];
- fixed redraw for copy button in new themes editor - typo in include DNA_ListBase.h... has to be DNA_listBase.h
2003-10-17 15:12:45 +00:00
addqueue(sa->win, REDRAW, 1);
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
}
}
else if(val==B_THEME_PASTE) {
if(th_curcol_ptr) {
th_curcol_ptr[0]= th_curcol_arr[0];
th_curcol_ptr[1]= th_curcol_arr[1];
th_curcol_ptr[2]= th_curcol_arr[2];
th_curcol_ptr[3]= th_curcol_arr[3];
allqueue(REDRAWALL, 0);
}
}
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
else if(val==B_RECALCLIGHT) {
if(U.light[0].flag==0 && U.light[1].flag==0 && U.light[2].flag==0)
U.light[0].flag= 1;
default_gl_light();
addqueue(sa->win, REDRAW, 1);
allqueue(REDRAWVIEW3D, 0);
* Adds configuration buttons for ffmpeg-output * Large sequencer rewrite to support: - Audio-tracks, which are not completely loaded into memory (hdaudio) but kept on disk instead. - A dependency tree, that builds only the Imbufs, that are really needed - Cleaner sequencer code - Per instance data in sequencer plugins (without this, the Dynamic Noise Reduction plugin would be impossible) - A Luma Waveform display - A U/V scatter plot display - Memcache limiting in sequencer - Buttons changed according to the boosted framecount limit
2006-02-05 19:30:37 +00:00
}
else if (val==B_MEMCACHELIMIT) {
printf("Setting memcache limit to %d\n",
U.memcachelimit);
MEM_CacheLimiter_set_maximum(
U.memcachelimit * 1024 * 1024);
New feature! You now can adjust the way the default 'solid opengl' drawing happens. It provides three lights now, all still located around your viewpoint. In the UserSettings menu you can set them on/off, give location and color / specularity. Very nice to enhance modeling in solid drawmode :) By default blender starts with 2 lights on now, but this is something we can define in the default .b.blend later on.
2003-10-25 16:53:50 +00:00
}
- The basic layer for Themes in place! - currently only implemented for 3d window - create as many themes you like, and name them - default theme is not editable, and always will be defined at startup (initTheme) - saves in .B.blend - themes for spaces can become local too, so you can set individual 3d windows at theme 'Maya' or so. (to be implemented) - it uses alpha as well...! API: This doesnt use the old method with BFCOLORID blahblah. The API is copied from OpenGL conventions (naming) as much as possible: - void BIF_ThemeColor(ScrArea *sa, int colorid) sets a color... id's are in BIF_resources.h (TH_GRID, TH_WIRE, etc) - void BIF_ThemeColorShade(ScrArea *sa, int colorid, int offset) sets a color with offset, no more weird COLORSHADE_LGREY stuff - void BIF_GetThemeColor3fv(ScrArea *sa, int colorid, float *col) like opengl, this gives you in *col the three rgb values - void BIF_GetThemeColor4ubv(ScrArea *sa, int colorid, char *col) or the one to get 4 bytes ThemeColor calls for globals (UI etc) can also call NULL for *sa... this is to be implemented still. Next step: cleaning up interface.c for all weird colorcalls.
2003-10-17 14:02:08 +00:00
else do_global_buttons(val);
Initial revision
2002-10-12 11:37:38 +00:00
break;
}
}
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void init_infospace(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceInfo *sinfo;
sinfo= MEM_callocN(sizeof(SpaceInfo), "initinfo");
BLI_addhead(&sa->spacedata, sinfo);
- bug fix #257 crash when ESC out of FileSelect, while previous window Info (user settings)
2003-06-13 19:56:15 +00:00
sinfo->spacetype=SPACE_INFO;
Initial revision
2002-10-12 11:37:38 +00:00
}
/* ******************** SPACE: BUTS ********************** */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
extern void drawbutspace(ScrArea *sa, void *spacedata); /* buttons.c */
Initial revision
2002-10-12 11:37:38 +00:00
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
static void changebutspace(ScrArea *sa, void *spacedata)
Initial revision
2002-10-12 11:37:38 +00:00
{
if(G.v2d==0) return;
test_view2d(G.v2d, curarea->winx, curarea->winy);
- further cleanup of window matrix code. Now ALL 2d ortho calls are using an identical offset; which is 0.375 and official recommended by OpenGL. This to further investigate the AA font errors on some systems with ATI cards.
2003-11-12 21:14:30 +00:00
myortho2(G.v2d->cur.xmin, G.v2d->cur.xmax, G.v2d->cur.ymin, G.v2d->cur.ymax);
Initial revision
2002-10-12 11:37:38 +00:00
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void winqreadbutspace(ScrArea *sa, void *spacedata, BWinEvent *evt)
Initial revision
2002-10-12 11:37:38 +00:00
{
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
unsigned short event= evt->event;
short val= evt->val;
Initial revision
2002-10-12 11:37:38 +00:00
SpaceButs *sbuts= curarea->spacedata.first;
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
ScrArea *sa2, *sa3d;
huge commit, sorry! this is part 1 of the UI makeover. It has: - menu system from Matt integrated - buttons drawing from Matt - generic button panel system implemented - converted displaybuttons (not the rest yet) - cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact. - cleaned loads of little compiler warnings, protos... still a lot of work needed, will all be in next week i hope! (warn: 2 new c files! butspace.c and buttons_scene.c)
2003-10-04 20:35:50 +00:00
int nr, doredraw= 0;
Initial revision
2002-10-12 11:37:38 +00:00
if(val) {
if( uiDoBlocks(&curarea->uiblocks, event)!=UI_NOTHING ) event= 0;
switch(event) {
case UI_BUT_EVENT:
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
do_butspace(val);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case MIDDLEMOUSE:
added mousewheel support part 2
2003-01-28 11:14:38 +00:00
case WHEELUPMOUSE:
case WHEELDOWNMOUSE:
view2dmove(event); /* in drawipo.c */
Initial revision
2002-10-12 11:37:38 +00:00
break;
- panels now scroll with page-up and page-down too.
2003-10-04 21:03:57 +00:00
case PAGEUPKEY:
event= WHEELUPMOUSE;
view2dmove(event); /* in drawipo.c */
break;
case PAGEDOWNKEY:
event= WHEELDOWNMOUSE;
view2dmove(event); /* in drawipo.c */
break;
huge commit, sorry! this is part 1 of the UI makeover. It has: - menu system from Matt integrated - buttons drawing from Matt - generic button panel system implemented - converted displaybuttons (not the rest yet) - cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact. - cleaned loads of little compiler warnings, protos... still a lot of work needed, will all be in next week i hope! (warn: 2 new c files! butspace.c and buttons_scene.c)
2003-10-04 20:35:50 +00:00
case RIGHTMOUSE:
* Added butspace and sound menus. That's all of them now, phew. * Very small tweaks to Sequence and Ipo menus
2004-01-10 11:19:05 +00:00
nr= pupmenu("Panel Alignment%t|Horizontal%x1|Vertical%x2|Free %x0");
huge commit, sorry! this is part 1 of the UI makeover. It has: - menu system from Matt integrated - buttons drawing from Matt - generic button panel system implemented - converted displaybuttons (not the rest yet) - cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact. - cleaned loads of little compiler warnings, protos... still a lot of work needed, will all be in next week i hope! (warn: 2 new c files! butspace.c and buttons_scene.c)
2003-10-04 20:35:50 +00:00
if (nr>=0) {
sbuts->align= nr;
- fixes in material buttons (still tentative design!) - cutoff of text in menus and buttons now even better! - size of pull-up menu buttons is corrected - pressing at 'menu button' had a delay, fixed General: the 'outo open' wont become default, it will be removed or become a user option. I am experimenting with it to get it all OK. The 'auto open' for secondary levels in pulldowns will remain there Check the latest state of pull-up menu buttons. for example the mode selector: you can use such buttons in three ways, - click on it, it opens and you can select - click-and-hold-mouse, move, release at item you want to select - move mouse over button, wait, it opens The 'auto open' and its time threshold both can be user settings.
2003-10-11 18:15:07 +00:00
if(nr) {
uiAlignPanelStep(sa, 1.0);
do_buts_buttons(B_BUTSHOME);
}
huge commit, sorry! this is part 1 of the UI makeover. It has: - menu system from Matt integrated - buttons drawing from Matt - generic button panel system implemented - converted displaybuttons (not the rest yet) - cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact. - cleaned loads of little compiler warnings, protos... still a lot of work needed, will all be in next week i hope! (warn: 2 new c files! butspace.c and buttons_scene.c)
2003-10-04 20:35:50 +00:00
}
added mousewheel support part 2
2003-01-28 11:14:38 +00:00
huge commit, sorry! this is part 1 of the UI makeover. It has: - menu system from Matt integrated - buttons drawing from Matt - generic button panel system implemented - converted displaybuttons (not the rest yet) - cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact. - cleaned loads of little compiler warnings, protos... still a lot of work needed, will all be in next week i hope! (warn: 2 new c files! butspace.c and buttons_scene.c)
2003-10-04 20:35:50 +00:00
break;
Initial revision
2002-10-12 11:37:38 +00:00
case PADPLUSKEY:
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
view2d_zoom(&sbuts->v2d, 0.06f, curarea->winx, curarea->winy);
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
scrarea_queue_winredraw(curarea);
break;
Initial revision
2002-10-12 11:37:38 +00:00
case PADMINUS:
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
view2d_zoom(&sbuts->v2d, -0.075f, curarea->winx, curarea->winy);
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
scrarea_queue_winredraw(curarea);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case RENDERPREVIEW:
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
BIF_previewrender_buts(sbuts);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case HOMEKEY:
do_buts_buttons(B_BUTSHOME);
break;
/* if only 1 view, also de persp, excluding arrowkeys */
case PAD0: case PAD1: case PAD3:
case PAD5: case PAD7: case PAD9:
case PADENTER: case ZKEY: case PKEY:
sa3d= 0;
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
sa2= G.curscreen->areabase.first;
while(sa2) {
if(sa2->spacetype==SPACE_VIEW3D) {
Initial revision
2002-10-12 11:37:38 +00:00
if(sa3d) return;
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
sa3d= sa2;
Initial revision
2002-10-12 11:37:38 +00:00
}
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
sa2= sa2->next;
Initial revision
2002-10-12 11:37:38 +00:00
}
if(sa3d) {
sa= curarea;
areawinset(sa3d->win);
Bugfix #4747 Using "Deselect all" pulldown in Node Editor crashed when no nodetree is visible. Bugfix #4753 Hotkey SHIFT+P in buttons window started game engine, which it should not.
2006-07-21 11:52:41 +00:00
if(event==PKEY && G.qual==0) start_game();
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
else if(event==ZKEY) toggle_shading();
Initial revision
2002-10-12 11:37:38 +00:00
else persptoetsen(event);
scrarea_queue_winredraw(sa3d);
scrarea_queue_headredraw(sa3d);
areawinset(sa->win);
}
}
}
if(doredraw) scrarea_queue_winredraw(curarea);
}
void set_rects_butspace(SpaceButs *buts)
{
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* buts space goes from (0,0) to (1280, 228) */
Initial revision
2002-10-12 11:37:38 +00:00
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
buts->v2d.tot.xmin= 0.0f;
buts->v2d.tot.ymin= 0.0f;
buts->v2d.tot.xmax= 1279.0f;
buts->v2d.tot.ymax= 228.0f;
Initial revision
2002-10-12 11:37:38 +00:00
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
buts->v2d.min[0]= 256.0f;
buts->v2d.min[1]= 42.0f;
Initial revision
2002-10-12 11:37:38 +00:00
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
buts->v2d.max[0]= 2048.0f;
buts->v2d.max[1]= 450.0f;
Initial revision
2002-10-12 11:37:38 +00:00
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
buts->v2d.minzoom= 0.5f;
buts->v2d.maxzoom= 1.21f;
Initial revision
2002-10-12 11:37:38 +00:00
buts->v2d.scroll= 0;
buts->v2d.keepaspect= 1;
buts->v2d.keepzoom= 1;
buts->v2d.keeptot= 1;
}
void test_butspace(void)
{
ScrArea *area= curarea;
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
int blocksmin= uiBlocksGetYMin(&area->uiblocks)-10.0f;
Initial revision
2002-10-12 11:37:38 +00:00
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
G.buts->v2d.tot.ymin= MIN2(0.0f, blocksmin-10.0f);
Initial revision
2002-10-12 11:37:38 +00:00
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void init_butspace(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceButs *buts;
buts= MEM_callocN(sizeof(SpaceButs), "initbuts");
BLI_addhead(&sa->spacedata, buts);
buts->spacetype= SPACE_BUTS;
buts->scaflag= BUTS_SENS_LINK|BUTS_SENS_ACT|BUTS_CONT_ACT|BUTS_ACT_ACT|BUTS_ACT_LINK;
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* set_rects only does defaults, so after reading a file the cur has not changed */
Initial revision
2002-10-12 11:37:38 +00:00
set_rects_butspace(buts);
buts->v2d.cur= buts->v2d.tot;
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
buts->ri = NULL;
Initial revision
2002-10-12 11:37:38 +00:00
}
Bugfix #4502 A subsequent hotkey press like F5 now cycles through the sub-context in buttons. However, this should not happen when clicking on Material icon in outliner!
2006-06-27 12:54:16 +00:00
void extern_set_butspace(int fkey, int do_cycle)
Initial revision
2002-10-12 11:37:38 +00:00
{
ScrArea *sa;
SpaceButs *sbuts;
Buttonswindow: Fkey cycling bug, accessing OBACT without checking it OK. Caused crash on pressing F6,F5 after deleting object (thanks DJC!)
2005-11-26 15:13:10 +00:00
Object *ob= OBACT;
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
/* when a f-key pressed: 'closest' button window is initialized */
Initial revision
2002-10-12 11:37:38 +00:00
if(curarea->spacetype==SPACE_BUTS) sa= curarea;
else {
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* find area */
Initial revision
2002-10-12 11:37:38 +00:00
sa= G.curscreen->areabase.first;
while(sa) {
if(sa->spacetype==SPACE_BUTS) break;
sa= sa->next;
}
}
Bugfix #4502 A subsequent hotkey press like F5 now cycles through the sub-context in buttons. However, this should not happen when clicking on Material icon in outliner!
2006-06-27 12:54:16 +00:00
if(sa==NULL) return;
Initial revision
2002-10-12 11:37:38 +00:00
if(sa!=curarea) areawinset(sa->win);
sbuts= sa->spacedata.first;
Bugfix #4502 A subsequent hotkey press like F5 now cycles through the sub-context in buttons. However, this should not happen when clicking on Material icon in outliner!
2006-06-27 12:54:16 +00:00
if(!do_cycle) sbuts->oldkeypress= 0;
Initial revision
2002-10-12 11:37:38 +00:00
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
if(fkey==F4KEY) {
- Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world - Converted lamp buttons and world buttons, they're pretty! - menu auto open now is user preset, including 2 thresholds you can set - hilites of pulldown menus were not cleared, fixed - changed F4 key to logic. F5 will show lamp buttons, when lamp active - in 'shader context' buttons, clicking camera will show world
2003-10-12 13:58:56 +00:00
sbuts->mainb= CONTEXT_LOGIC;
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
}
else if(fkey==F5KEY) {
* Buttons window tab cycling Repeated presses of the F* key to go to a buttons context will now cycle through the sub-tabs within. For example, when at a different buttons window context, pressing F7 twice will cycle through to the Physics buttons tab, pressing F10 three times will cycle through to the Sound buttons tab, etc.
2005-11-05 16:35:32 +00:00
/* if it's already in shading context, cycle between tabs with the same key */
* Fixed a little problem when using both F* keys and header buttons to change buttons tabs wouldn't switch quite right.
2005-11-10 20:07:17 +00:00
if (sbuts->oldkeypress == F5KEY) {
* Buttons window tab cycling Repeated presses of the F* key to go to a buttons context will now cycle through the sub-tabs within. For example, when at a different buttons window context, pressing F7 twice will cycle through to the Physics buttons tab, pressing F10 three times will cycle through to the Sound buttons tab, etc.
2005-11-05 16:35:32 +00:00
if (sbuts->tab[CONTEXT_SHADING]==TAB_SHADING_LAMP)
sbuts->tab[CONTEXT_SHADING]=TAB_SHADING_MAT;
else if (sbuts->tab[CONTEXT_SHADING]==TAB_SHADING_MAT)
sbuts->tab[CONTEXT_SHADING]=TAB_SHADING_TEX;
else if (sbuts->tab[CONTEXT_SHADING]==1) {
sbuts->tab[CONTEXT_SHADING]=TAB_SHADING_RAD;
}
else if (sbuts->tab[CONTEXT_SHADING]==TAB_SHADING_RAD)
sbuts->tab[CONTEXT_SHADING]=TAB_SHADING_WORLD;
else if (sbuts->tab[CONTEXT_SHADING]==TAB_SHADING_WORLD)
sbuts->tab[CONTEXT_SHADING]=TAB_SHADING_LAMP;
}
* Tweaked the logic of the Fkey button cycling to make it a bit smarter
2005-11-24 17:55:46 +00:00
/* if we're coming in from texture buttons,
or from outside the shading context, just go to the 'default' */
Bugfix #4515 Another outliner + buttonswindow select error: When clicking on lamp icon, the buttons window shows material, not lamp buttons. Same happened for F5key btw, when buttons were showing world. Also fixed: when switching to world buttons with F8key, the preview was not re-rendered.
2006-06-28 20:06:48 +00:00
else if (ob) {
Finally switched to porting UI stuff from tuhopuu! This commit is based on the patch & cool design work of Matt. It includes the new Lamp drawing style, and replaces the Object center dots with a similar styled OpenGL drawn dot. Important side-note is that removing the old glDrawPixels() for centers or lamps will not only make Blender faster, but also prevents crashing on a couple of cheaper 3d cards (as reported for S3 and Intel on-board cards) Notes: - The new default only draws Object centers when selected or active. If you like to see them always, use the View Properties Panel. You can also save that in the .B.blend - The size for centers (and lamps) is in the User settings "View & Controls" - Unselected Lamps, and their offset lines from zero Z, are drawn in a new Theme color Changes and additions in Matt's patch: - Lamps and centers are drawn fixed size, in pixels. Also the 'sun' lamp draws screen aligned now. - Center dots now also draw in blue to denote Library linkage or to show that an Object has been linked to other scenes. - When objects are empty (no vertices) they will always draw a center dot. Otherwise these objects would never be selectable anymore! - Added theme setting for center size, and initialization - Removed the old redundant code for drawing centers - Cleanup of drawing routines, made center dots faster - Started removing calls to glBlendFunc(). Regular alpha drawing should become standard, and the (very) occasional exception should return this to default after usage.
2005-11-19 10:55:07 +00:00
sbuts->mainb= CONTEXT_SHADING;
Buttonswindow: Fkey cycling bug, accessing OBACT without checking it OK. Caused crash on pressing F6,F5 after deleting object (thanks DJC!)
2005-11-26 15:13:10 +00:00
if(ob->type==OB_CAMERA)
Finally switched to porting UI stuff from tuhopuu! This commit is based on the patch & cool design work of Matt. It includes the new Lamp drawing style, and replaces the Object center dots with a similar styled OpenGL drawn dot. Important side-note is that removing the old glDrawPixels() for centers or lamps will not only make Blender faster, but also prevents crashing on a couple of cheaper 3d cards (as reported for S3 and Intel on-board cards) Notes: - The new default only draws Object centers when selected or active. If you like to see them always, use the View Properties Panel. You can also save that in the .B.blend - The size for centers (and lamps) is in the User settings "View & Controls" - Unselected Lamps, and their offset lines from zero Z, are drawn in a new Theme color Changes and additions in Matt's patch: - Lamps and centers are drawn fixed size, in pixels. Also the 'sun' lamp draws screen aligned now. - Center dots now also draw in blue to denote Library linkage or to show that an Object has been linked to other scenes. - When objects are empty (no vertices) they will always draw a center dot. Otherwise these objects would never be selectable anymore! - Added theme setting for center size, and initialization - Removed the old redundant code for drawing centers - Cleanup of drawing routines, made center dots faster - Started removing calls to glBlendFunc(). Regular alpha drawing should become standard, and the (very) occasional exception should return this to default after usage.
2005-11-19 10:55:07 +00:00
sbuts->tab[CONTEXT_SHADING]= TAB_SHADING_WORLD;
Buttonswindow: Fkey cycling bug, accessing OBACT without checking it OK. Caused crash on pressing F6,F5 after deleting object (thanks DJC!)
2005-11-26 15:13:10 +00:00
else if(ob->type==OB_LAMP)
Finally switched to porting UI stuff from tuhopuu! This commit is based on the patch & cool design work of Matt. It includes the new Lamp drawing style, and replaces the Object center dots with a similar styled OpenGL drawn dot. Important side-note is that removing the old glDrawPixels() for centers or lamps will not only make Blender faster, but also prevents crashing on a couple of cheaper 3d cards (as reported for S3 and Intel on-board cards) Notes: - The new default only draws Object centers when selected or active. If you like to see them always, use the View Properties Panel. You can also save that in the .B.blend - The size for centers (and lamps) is in the User settings "View & Controls" - Unselected Lamps, and their offset lines from zero Z, are drawn in a new Theme color Changes and additions in Matt's patch: - Lamps and centers are drawn fixed size, in pixels. Also the 'sun' lamp draws screen aligned now. - Center dots now also draw in blue to denote Library linkage or to show that an Object has been linked to other scenes. - When objects are empty (no vertices) they will always draw a center dot. Otherwise these objects would never be selectable anymore! - Added theme setting for center size, and initialization - Removed the old redundant code for drawing centers - Cleanup of drawing routines, made center dots faster - Started removing calls to glBlendFunc(). Regular alpha drawing should become standard, and the (very) occasional exception should return this to default after usage.
2005-11-19 10:55:07 +00:00
sbuts->tab[CONTEXT_SHADING]= TAB_SHADING_LAMP;
else
sbuts->tab[CONTEXT_SHADING]= TAB_SHADING_MAT;
}
* Fixed a little problem when using both F* keys and header buttons to change buttons tabs wouldn't switch quite right.
2005-11-10 20:07:17 +00:00
else {
sbuts->mainb= CONTEXT_SHADING;
sbuts->tab[CONTEXT_SHADING]= TAB_SHADING_MAT;
}
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
BIF_preview_changed(ID_TE);
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
}
else if(fkey==F6KEY) {
sbuts->mainb= CONTEXT_SHADING;
sbuts->tab[CONTEXT_SHADING]= TAB_SHADING_TEX;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
BIF_preview_changed(ID_TE);
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
}
* Buttons window tab cycling Repeated presses of the F* key to go to a buttons context will now cycle through the sub-tabs within. For example, when at a different buttons window context, pressing F7 twice will cycle through to the Physics buttons tab, pressing F10 three times will cycle through to the Sound buttons tab, etc.
2005-11-05 16:35:32 +00:00
else if(fkey==F7KEY) {
/* if it's already in object context, cycle between tabs with the same key */
* Fixed a little problem when using both F* keys and header buttons to change buttons tabs wouldn't switch quite right.
2005-11-10 20:07:17 +00:00
if (sbuts->oldkeypress == F7KEY) {
* Buttons window tab cycling Repeated presses of the F* key to go to a buttons context will now cycle through the sub-tabs within. For example, when at a different buttons window context, pressing F7 twice will cycle through to the Physics buttons tab, pressing F10 three times will cycle through to the Sound buttons tab, etc.
2005-11-05 16:35:32 +00:00
if (sbuts->tab[CONTEXT_OBJECT]==TAB_OBJECT_OBJECT)
sbuts->tab[CONTEXT_OBJECT]=TAB_OBJECT_PHYSICS;
else if (sbuts->tab[CONTEXT_OBJECT]==TAB_OBJECT_PHYSICS)
sbuts->tab[CONTEXT_OBJECT]=TAB_OBJECT_OBJECT;
}
else sbuts->mainb= CONTEXT_OBJECT;
}
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
else if(fkey==F8KEY) {
sbuts->mainb= CONTEXT_SHADING;
sbuts->tab[CONTEXT_SHADING]= TAB_SHADING_WORLD;
Bugfix #4515 Another outliner + buttonswindow select error: When clicking on lamp icon, the buttons window shows material, not lamp buttons. Same happened for F5key btw, when buttons were showing world. Also fixed: when switching to world buttons with F8key, the preview was not re-rendered.
2006-06-28 20:06:48 +00:00
BIF_preview_changed(ID_TE);
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
}
- changed header from buttonwindow into new type - changed meaning of F4-F10 keys (as compatible as possible, but we need something!) check UI design doc for proposal - made new call for switching direction of buttons in Y, for when pulldown moves direction - cleaned up all redundant manual switching code from headerbuttons.c
2003-10-07 12:49:39 +00:00
else if(fkey==F9KEY) sbuts->mainb= CONTEXT_EDITING;
* Buttons window tab cycling Repeated presses of the F* key to go to a buttons context will now cycle through the sub-tabs within. For example, when at a different buttons window context, pressing F7 twice will cycle through to the Physics buttons tab, pressing F10 three times will cycle through to the Sound buttons tab, etc.
2005-11-05 16:35:32 +00:00
else if(fkey==F10KEY) {
/* if it's already in scene context, cycle between tabs with the same key */
* Fixed a little problem when using both F* keys and header buttons to change buttons tabs wouldn't switch quite right.
2005-11-10 20:07:17 +00:00
if (sbuts->oldkeypress == F10KEY) {
* Buttons window tab cycling Repeated presses of the F* key to go to a buttons context will now cycle through the sub-tabs within. For example, when at a different buttons window context, pressing F7 twice will cycle through to the Physics buttons tab, pressing F10 three times will cycle through to the Sound buttons tab, etc.
2005-11-05 16:35:32 +00:00
if (sbuts->tab[CONTEXT_SCENE]==TAB_SCENE_RENDER)
sbuts->tab[CONTEXT_SCENE]=TAB_SCENE_ANIM;
else if (sbuts->tab[CONTEXT_SCENE]==TAB_SCENE_ANIM)
sbuts->tab[CONTEXT_SCENE]=TAB_SCENE_SOUND;
else if (sbuts->tab[CONTEXT_SCENE]==TAB_SCENE_SOUND)
sbuts->tab[CONTEXT_SCENE]=TAB_SCENE_RENDER;
}
else sbuts->mainb= CONTEXT_SCENE;
}
* Fixed a little problem when using both F* keys and header buttons to change buttons tabs wouldn't switch quite right.
2005-11-10 20:07:17 +00:00
sbuts->oldkeypress = fkey;
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_headredraw(sa);
scrarea_queue_winredraw(sa);
}
/* ******************** SPACE: SEQUENCE ********************** */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
/* extern void drawseqspace(ScrArea *sa, void *spacedata); BIF_drawseq.h */
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void winqreadseqspace(ScrArea *sa, void *spacedata, BWinEvent *evt)
Initial revision
2002-10-12 11:37:38 +00:00
{
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
unsigned short event= evt->event;
short val= evt->val;
Initial revision
2002-10-12 11:37:38 +00:00
SpaceSeq *sseq= curarea->spacedata.first;
View2D *v2d= &sseq->v2d;
==Sequencer== This patch is mostly a usability patch for the sequencer, mainly written by Anders Gudmundson and twisted a little bit by me. - Lock Time to other windows - Possibility to switch the X-Axis between frames and seconds-display - IPO-Frame Locking for plugins (T-Key) - Additional Popup to add HD-Sound and Movie at once - In Timeline-Window: Sequencer windows only playback - Make the IPOs a little bit IPO-Frame-Lock friendlier (doesn't jump; the frame that is drawn has the right dimension) - Wheel-Mouse buttons make the sequencer window zoom again. - The "This is not a sound/movie-file message" now reads "... or FFMPEG-support not compiled in!" since I learned some prominent people who complained, that hdaudio does not work for them ;-) - Make SPACEKEY open up the "Add Strip"-Popup on the timeline and start playback in the preview window.
2006-03-26 21:36:42 +00:00
Sequence *last_seq = get_last_seq();
Initial revision
2002-10-12 11:37:38 +00:00
float dx, dy;
Patch(s) provied by Fabien Devaux This fixes bug# 4421 http://projects.blender.org/tracker/index.php?func=detail&aid=4421&group_id=9&atid=125 Initalizes audio in scrub mode properly. also avoids playing back some samples twice. Kent
2006-06-23 15:08:13 +00:00
int doredraw= 0, cfra=0, first;
Initial revision
2002-10-12 11:37:38 +00:00
short mval[2];
==Sequencer== This patch is mostly a usability patch for the sequencer, mainly written by Anders Gudmundson and twisted a little bit by me. - Lock Time to other windows - Possibility to switch the X-Axis between frames and seconds-display - IPO-Frame Locking for plugins (T-Key) - Additional Popup to add HD-Sound and Movie at once - In Timeline-Window: Sequencer windows only playback - Make the IPOs a little bit IPO-Frame-Lock friendlier (doesn't jump; the frame that is drawn has the right dimension) - Wheel-Mouse buttons make the sequencer window zoom again. - The "This is not a sound/movie-file message" now reads "... or FFMPEG-support not compiled in!" since I learned some prominent people who complained, that hdaudio does not work for them ;-) - Make SPACEKEY open up the "Add Strip"-Popup on the timeline and start playback in the preview window.
2006-03-26 21:36:42 +00:00
short nr;
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
short mousebut = L_MOUSE;
Initial revision
2002-10-12 11:37:38 +00:00
if(curarea->win==0) return;
if(val) {
if( uiDoBlocks(&curarea->uiblocks, event)!=UI_NOTHING ) event= 0;
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
/* swap mouse buttons based on user preference */
if (U.flag & USER_LMOUSESELECT) {
Bug fix #1893 Option to switch left/right mouse didn't work for floating panels. It then still selected stuff behind the button. Was due to using wrong variable for events.
2004-11-26 20:20:42 +00:00
if (event == LEFTMOUSE) {
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
event = RIGHTMOUSE;
mousebut = L_MOUSE;
Bug fix #1893 Option to switch left/right mouse didn't work for floating panels. It then still selected stuff behind the button. Was due to using wrong variable for events.
2004-11-26 20:20:42 +00:00
} else if (event == RIGHTMOUSE) {
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
event = LEFTMOUSE;
mousebut = R_MOUSE;
}
}
Initial revision
2002-10-12 11:37:38 +00:00
switch(event) {
Added Panel support in Sequence window, and converted old Nkey menu for it.
2004-06-16 20:25:56 +00:00
case UI_BUT_EVENT:
do_seqbuttons(val);
break;
Initial revision
2002-10-12 11:37:38 +00:00
case LEFTMOUSE:
added mousewheel support part 3
2003-01-28 12:14:47 +00:00
if(sseq->mainb || view2dmove(event)==0) {
Initial revision
2002-10-12 11:37:38 +00:00
first= 1;
set_special_seq_update(1);
do {
getmouseco_areawin(mval);
areamouseco_to_ipoco(v2d, mval, &dx, &dy);
cfra= (int)dx;
if(cfra< 1) cfra= 1;
/* else if(cfra> EFRA) cfra= EFRA; */
if( cfra!=CFRA || first ) {
first= 0;
CFRA= cfra;
Tweaked the force_draw() calls, to allow headerprint() to work while doing a transform. Solves bug reported by Brecht about this.
2004-11-07 18:20:44 +00:00
force_draw(0);
Commit message and the brunt of the code courtesy of intrr, apologies for the size of this; Finally, the Sequencer audio support and global audio/animation sync stuff! (See http://intrr.org/blender/audiosequencer.html) Stuff that has been done: ./source/blender/blenloader/intern/writefile.c ./source/blender/blenloader/intern/readfile.c Added code to make it handle sounds used by audio strips, and to convert Scene data from older (<2.28) versions to init Scene global audio settings (Scene->audio) to defaults. ./source/blender/include/BSE_seqaudio.h ./source/blender/src/seqaudio.c The main audio routines that start/stop/scrub the audio stream at a certain frame position, provide the frame reference for the current stream position, mix the audio, convert the audio, mixdown the audio into a file. ./source/blender/makesdna/DNA_sound_types.h Introduced new variables in the bSound struct to accomodate the sample data after converted to the scene's global mixing format (stream, streamlen). Also added a new flag SOUND_FLAGS_SEQUENCE that gets set if the Sound belongs to a sequence strip. ./source/blender/makesdna/DNA_scene_types.h Added AudioData struct, which holds scene-global audio settings. ./source/blender/makesdna/DNA_sequence_types.h Added support for audio strips. Some variables to hold Panning/Attenuation information, position information, reference to the sample, and some flags. ./source/blender/makesdna/DNA_userdef_types.h ./source/blender/src/usiblender.c Added a "Mixing buffer size" userpref. Made the versions stuff initialize it to a default for versions <2.28. ./source/blender/makesdna/DNA_space_types.h ./source/blender/src/filesel.c Added a Cyan dot to .WAV files. Any other suggestions on a better color? :) ./source/blender/src/editsound.c Changes (fixes) to the WAV file loader, re-enabled some gameengine code that is needed for dealing with bSounds and bSamples. ./source/blender/src/editipo.c ./source/blender/src/drawseq.c ./source/blender/src/editnla.c ./source/blender/src/space.c ./source/blender/src/drawview.c ./source/blender/src/renderwin.c ./source/blender/src/headerbuttons.c - Created two different wrappers for update_for_newframe(), one which scrubs the audio, one which doesn't. - Replaced some of the occurences of update_for_newframe() with update_for_newframe_muted(), which doesn't scrub the audio. - In drawview.c: Changed the synchronization scheme to get the current audio position from the audio engine, and use that as a reference for setting CFRA. Implements a/v sync and framedrop. - In editipo.c: Changed handling of Fac IPOs to be usable for audio strips as volume envelopes. - In space.c: Added the mixing buffer size Userpref, enabled audio scrubbing (update_for_newframe()) for moving the sequence editor framebar. ./source/blender/src/editseq.c Added support for audio strips and a default directory for WAV files which gets saved from the last Shift-A operation. ./source/blender/src/buttons.c Added Scene-global audio sequencer settings in Sound buttons. ./source/blender/src/sequence.c Various stuff that deals with handling audio strips differently than usual strips.
2003-07-13 20:16:56 +00:00
update_for_newframe(); /* for audio scrubbing */
Initial revision
2002-10-12 11:37:38 +00:00
}
Bug fix #1939 Combining panorama scene and Sequencer effect on scene (like glow) crashed. Found two other issues; - on click in sequencer, the image output window didn't redraw correct, but only when a render window was opened. Caused by missing 'activate' call - added a pause in dragging-frame loop to make it idle friendly
2004-12-02 18:12:18 +00:00
else PIL_sleep_ms(30);
Initial revision
2002-10-12 11:37:38 +00:00
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
} while(get_mbut() & mousebut);
Initial revision
2002-10-12 11:37:38 +00:00
set_special_seq_update(0);
Patch(s) provied by Fabien Devaux This fixes bug# 4421 http://projects.blender.org/tracker/index.php?func=detail&aid=4421&group_id=9&atid=125 Initalizes audio in scrub mode properly. also avoids playing back some samples twice. Kent
2006-06-23 15:08:13 +00:00
if (cfra == 0)
update_for_newframe();
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case MIDDLEMOUSE:
==Sequencer== Added patch by Matt Ebb, that enhances the sequencer GUI in several ways: - It looks a lot better - Strip colours are themeable. - The drawing code is more readable. - The background of the timeline makes now distinguishing the channels easier by alternating between different shades of gray. - Handle-scaling is clamped to min and max-values, making it possible to grab strips at large zooming levels more easily. - Preview-images can be panned by dragging it with the middle mouse button. Home-Key resets the position. - Since some people can't grab the meaning of "C 0", it is renamed to "Chan: 0" - Effect strips have slightly different colors to distinguish them better. Additionally: - fixed an off by one error in Matt's patch - Scene-rendering saves CFRA to avoid jumping current-scene on scrub (might be academic fix, since most likely it only happens if you add the sequencer-scene to the timeline... But nevertheless it bugs you on testing the GUI ;-)
2006-06-08 19:05:58 +00:00
if(sseq->mainb) seq_viewmove(sseq);
else view2dmove(event); /* in drawipo.c */
Initial revision
2002-10-12 11:37:38 +00:00
break;
case RIGHTMOUSE:
if(sseq->mainb) break;
mouse_select_seq();
break;
case PADPLUSKEY:
==Sequencer== This patch is mostly a usability patch for the sequencer, mainly written by Anders Gudmundson and twisted a little bit by me. - Lock Time to other windows - Possibility to switch the X-Axis between frames and seconds-display - IPO-Frame Locking for plugins (T-Key) - Additional Popup to add HD-Sound and Movie at once - In Timeline-Window: Sequencer windows only playback - Make the IPOs a little bit IPO-Frame-Lock friendlier (doesn't jump; the frame that is drawn has the right dimension) - Wheel-Mouse buttons make the sequencer window zoom again. - The "This is not a sound/movie-file message" now reads "... or FFMPEG-support not compiled in!" since I learned some prominent people who complained, that hdaudio does not work for them ;-) - Make SPACEKEY open up the "Add Strip"-Popup on the timeline and start playback in the preview window.
2006-03-26 21:36:42 +00:00
case WHEELUPMOUSE:
Initial revision
2002-10-12 11:37:38 +00:00
if(sseq->mainb) {
sseq->zoom++;
First part of sequencer attack: Sequencer image preview finally supports zooming out. Yay!
2005-11-07 13:22:23 +00:00
if(sseq->zoom==-1) sseq->zoom= 1;
Initial revision
2002-10-12 11:37:38 +00:00
if(sseq->zoom>8) sseq->zoom= 8;
}
else {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0)) {
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
dx= 0.1154f*(v2d->cur.xmax-v2d->cur.xmin);
Initial revision
2002-10-12 11:37:38 +00:00
v2d->cur.xmin+= dx;
v2d->cur.xmax-= dx;
Bugfix #4223 Sequencer: A call to view2d_do_locks() got accidentally added in main drawing loop, causing an infinite loop of redraws when this option was used with more sequence windows open. Added missing view2d_do_locks() to zooming in Sequence window. Also cleaned this call a bit.
2006-06-04 16:26:02 +00:00
test_view2d(G.v2d, sa->winx, sa->winy);
view2d_do_locks(sa, V2D_LOCK_COPY);
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.qual==LR_SHIFTKEY)) {
insert_gap(25, CFRA);
Fixed showstopper (thnx intrr!) bug in sequencer + global undo. This was actually a wrong pointer check in fileread that caused no harm in past, but with UI-less file save it wreaked havoc! Decided to add undo in sequencer window after all... it also involved saving Meta strip settings in files. Very nice :)
2004-11-13 12:55:59 +00:00
BIF_undo_push("Insert gaps Sequencer");
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
allqueue(REDRAWSEQ, 0);
}
else if(G.qual==LR_ALTKEY) {
insert_gap(250, CFRA);
Fixed showstopper (thnx intrr!) bug in sequencer + global undo. This was actually a wrong pointer check in fileread that caused no harm in past, but with UI-less file save it wreaked havoc! Decided to add undo in sequencer window after all... it also involved saving Meta strip settings in files. Very nice :)
2004-11-13 12:55:59 +00:00
BIF_undo_push("Insert gaps Sequencer");
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
allqueue(REDRAWSEQ, 0);
}
Initial revision
2002-10-12 11:37:38 +00:00
}
doredraw= 1;
break;
case PADMINUS:
==Sequencer== This patch is mostly a usability patch for the sequencer, mainly written by Anders Gudmundson and twisted a little bit by me. - Lock Time to other windows - Possibility to switch the X-Axis between frames and seconds-display - IPO-Frame Locking for plugins (T-Key) - Additional Popup to add HD-Sound and Movie at once - In Timeline-Window: Sequencer windows only playback - Make the IPOs a little bit IPO-Frame-Lock friendlier (doesn't jump; the frame that is drawn has the right dimension) - Wheel-Mouse buttons make the sequencer window zoom again. - The "This is not a sound/movie-file message" now reads "... or FFMPEG-support not compiled in!" since I learned some prominent people who complained, that hdaudio does not work for them ;-) - Make SPACEKEY open up the "Add Strip"-Popup on the timeline and start playback in the preview window.
2006-03-26 21:36:42 +00:00
case WHEELDOWNMOUSE:
Initial revision
2002-10-12 11:37:38 +00:00
if(sseq->mainb) {
sseq->zoom--;
First part of sequencer attack: Sequencer image preview finally supports zooming out. Yay!
2005-11-07 13:22:23 +00:00
if(sseq->zoom==0) sseq->zoom= -2;
if(sseq->zoom<-8) sseq->zoom= -8;
Initial revision
2002-10-12 11:37:38 +00:00
}
else {
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY))
no_gaps();
else if((G.qual==0)) {
3D view orbit option: Around Active This fixes the active object in place when orbiting the view. Choppy 15fps demo can be seen there: http://www.elysiun.com/~theeth/bf/around_active.html Image Memory Grabage Collection This adds memory handling to the image code. An image is tagged each time it is used. During a collection cycle (frequency of cycles is user defined), if an image is older than a user defined limit, its buffer gets deallocated. This also applies to gl memory buffers. Images that are loading in GL memory needs to go through two time outs before being fully deallocated: the first time out deallocated the gl memorry, the second the buffer in ram. Notes: Image buffer loaded from python gets tagged as permanent upon load. That tag is removed when python stops using the image. I might have missed some tagging spots, especially in the rendering pipeline. Someone with more knowledge about this code should check to be careful. Tagging is done on every access, for rendering, this will probably be a performance hit. A scheme should be developped to only tag when the rendering is completed. Collecting is called in draw_object, most likely not the best place to do it. Safe from undo, since using undo deallocates memory anyway (like when loading a blend file with one currently opened) Userpref DNA changes: I've changed a couple of flagging variables from short to int. Some because they needed more space, others to keep SDNA happy. Info window changes: I've grouped a couple of buttons in aligned blocks and changed the color of mutually exclusive options to make them clearer. Matt didn't do any changes on that in tuhopuu, so hopefully I'm not stepping on anyone's feet with this. Also changed double constants into floats with f in a couple of places (mostly space.c) to make compiler happier.
2005-07-06 00:33:41 +00:00
dx= 0.15f*(v2d->cur.xmax-v2d->cur.xmin);
Initial revision
2002-10-12 11:37:38 +00:00
v2d->cur.xmin-= dx;
v2d->cur.xmax+= dx;
Bugfix #4223 Sequencer: A call to view2d_do_locks() got accidentally added in main drawing loop, causing an infinite loop of redraws when this option was used with more sequence windows open. Added missing view2d_do_locks() to zooming in Sequence window. Also cleaned this call a bit.
2006-06-04 16:26:02 +00:00
test_view2d(G.v2d, sa->winx, sa->winy);
view2d_do_locks(sa, V2D_LOCK_COPY);
Initial revision
2002-10-12 11:37:38 +00:00
}
}
doredraw= 1;
break;
case HOMEKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
do_seq_buttons(B_SEQHOME);
Initial revision
2002-10-12 11:37:38 +00:00
break;
case PADPERIOD:
if(last_seq) {
CFRA= last_seq->startdisp;
v2d->cur.xmin= last_seq->startdisp- (last_seq->len/20);
v2d->cur.xmax= last_seq->enddisp+ (last_seq->len/20);
update_for_newframe();
}
break;
case AKEY:
if(sseq->mainb) break;
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY)) {
added sequence editor pull-down menus. TODO: fix "Enter/Exit Meta Strip" to work correctly for nested meta strips.
2003-10-20 20:12:01 +00:00
add_sequence(-1);
Initial revision
2002-10-12 11:37:38 +00:00
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else if((G.qual==0))
swap_select_seq();
Initial revision
2002-10-12 11:37:38 +00:00
break;
==Sequencer== This patch is mostly a usability patch for the sequencer, mainly written by Anders Gudmundson and twisted a little bit by me. - Lock Time to other windows - Possibility to switch the X-Axis between frames and seconds-display - IPO-Frame Locking for plugins (T-Key) - Additional Popup to add HD-Sound and Movie at once - In Timeline-Window: Sequencer windows only playback - Make the IPOs a little bit IPO-Frame-Lock friendlier (doesn't jump; the frame that is drawn has the right dimension) - Wheel-Mouse buttons make the sequencer window zoom again. - The "This is not a sound/movie-file message" now reads "... or FFMPEG-support not compiled in!" since I learned some prominent people who complained, that hdaudio does not work for them ;-) - Make SPACEKEY open up the "Add Strip"-Popup on the timeline and start playback in the preview window.
2006-03-26 21:36:42 +00:00
case SPACEKEY:
if (G.qual==0) {
if (sseq->mainb) {
play_anim(1);
} else {
add_sequence(-1);
}
}
break;
Initial revision
2002-10-12 11:37:38 +00:00
case BKEY:
if(sseq->mainb) break;
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
borderselect_seq();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case CKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0)) {
if(last_seq && (last_seq->flag & (SEQ_LEFTSEL+SEQ_RIGHTSEL))) {
if(last_seq->flag & SEQ_LEFTSEL) CFRA= last_seq->startdisp;
else CFRA= last_seq->enddisp-1;
dx= CFRA-(v2d->cur.xmax+v2d->cur.xmin)/2;
v2d->cur.xmax+= dx;
v2d->cur.xmin+= dx;
update_for_newframe();
}
else
change_sequence();
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
case DKEY:
if(sseq->mainb) break;
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY)) add_duplicate_seq();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case EKEY:
break;
case FKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
set_filter_seq();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case GKEY:
if(sseq->mainb) break;
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
Removal of old transform() <sob> part one. - added in new transform the (not so useful but yah) old feature that does scrollwheel zoom during transform - had to change transform call arguments for uv-window/sequence/oops to match new transform for mouse callback TODO (for martin?) - pulldown menu support to call with local axes compliant as for pressing it with hotkey - mirrormenu() still uses old transform stuff...
2005-04-30 21:19:19 +00:00
transform_seq('g', 0);
Initial revision
2002-10-12 11:37:38 +00:00
break;
Patch provided by Matt Ebb, cut sequence strips (patch tracker). There were a couple of issues with the implementation: - there was no proper test if selected strips would be cut or not - cutting meta strips could go very wrong... for example when the cut of meta was in an internal gap. With meta's being recursive, and too complex, I've disabled Meta-cutting - added an OK menu for hotkey K - added warnings when no cut was done This is the first time in 6 years I do work in sequencer... man, this has grown into a messy bizz! Like sequence variables... using names like: start, startdisp, startstill, startoffs... totally confusing here. Could use giant cleanup! Implementation was weak from scratch though, Mea Culpa!
2005-08-14 10:31:14 +00:00
case KKEY:
if((G.qual==0)) { /* Cut at current frame */
if(okee("Cut strips")) seq_cut(CFRA);
}
break;
Initial revision
2002-10-12 11:37:38 +00:00
case MKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_ALTKEY)
un_meta();
else if((G.qual==0)){
* Adds configuration buttons for ffmpeg-output * Large sequencer rewrite to support: - Audio-tracks, which are not completely loaded into memory (hdaudio) but kept on disk instead. - A dependency tree, that builds only the Imbufs, that are really needed - Cleaner sequencer code - Per instance data in sequencer plugins (without this, the Dynamic Noise Reduction plugin would be impossible) - A Luma Waveform display - A U/V scatter plot display - Memcache limiting in sequencer - Buttons changed according to the boosted framecount limit
2006-02-05 19:30:37 +00:00
if ((last_seq) &&
(last_seq->type == SEQ_RAM_SOUND
|| last_seq->type == SEQ_HD_SOUND))
- Fixed two swapped array indices in seqaudio.c which prevented panning from working correctly - Added MKEY for muting audio strips (as they can't be part of a meta strip anyway)
2003-07-13 21:43:15 +00:00
{
last_seq->flag ^= SEQ_MUTE;
doredraw = 1;
}
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
else
make_meta();
- Fixed two swapped array indices in seqaudio.c which prevented panning from working correctly - Added MKEY for muting audio strips (as they can't be part of a meta strip anyway)
2003-07-13 21:43:15 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
Added Panel support in Sequence window, and converted old Nkey menu for it.
2004-06-16 20:25:56 +00:00
case NKEY:
if(G.qual==0) {
Popular request: the floating panels (NKEY) now close on a 2nd NKEY command. This for all current NKEY menus by default. Can be standard for each hotkey controlled Panel from now on; use toggle_blockhandler() for it. Another popular request: hotkey enabled Panels now optionally reopen on the previous location, instead of under mouse. This option "Pinned" is a user option now. Optional for later; have it as per-panel option... dunno! The last request, close on mouse-exit, won't be implemented, this intrudes with Panel consistancy, and is pretty OK solved with NKEY-NKEY now.
2004-06-19 12:25:28 +00:00
toggle_blockhandler(curarea, SEQ_HANDLER_PROPERTIES, UI_PNL_TO_MOUSE);
Added Panel support in Sequence window, and converted old Nkey menu for it.
2004-06-16 20:25:56 +00:00
scrarea_queue_winredraw(curarea);
}
break;
Initial revision
2002-10-12 11:37:38 +00:00
case SKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==LR_SHIFTKEY))
* Added 'Transform' menus to Ipo, OOPS, Action, NLA, and Sequence spaces * And a few small tweaks
2004-06-03 14:29:14 +00:00
seq_snap_menu();
Initial revision
2002-10-12 11:37:38 +00:00
break;
==Sequencer== This patch is mostly a usability patch for the sequencer, mainly written by Anders Gudmundson and twisted a little bit by me. - Lock Time to other windows - Possibility to switch the X-Axis between frames and seconds-display - IPO-Frame Locking for plugins (T-Key) - Additional Popup to add HD-Sound and Movie at once - In Timeline-Window: Sequencer windows only playback - Make the IPOs a little bit IPO-Frame-Lock friendlier (doesn't jump; the frame that is drawn has the right dimension) - Wheel-Mouse buttons make the sequencer window zoom again. - The "This is not a sound/movie-file message" now reads "... or FFMPEG-support not compiled in!" since I learned some prominent people who complained, that hdaudio does not work for them ;-) - Make SPACEKEY open up the "Add Strip"-Popup on the timeline and start playback in the preview window.
2006-03-26 21:36:42 +00:00
case PKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if((G.qual==0))
touch_seq_files();
Initial revision
2002-10-12 11:37:38 +00:00
break;
==Sequencer== This patch is mostly a usability patch for the sequencer, mainly written by Anders Gudmundson and twisted a little bit by me. - Lock Time to other windows - Possibility to switch the X-Axis between frames and seconds-display - IPO-Frame Locking for plugins (T-Key) - Additional Popup to add HD-Sound and Movie at once - In Timeline-Window: Sequencer windows only playback - Make the IPOs a little bit IPO-Frame-Lock friendlier (doesn't jump; the frame that is drawn has the right dimension) - Wheel-Mouse buttons make the sequencer window zoom again. - The "This is not a sound/movie-file message" now reads "... or FFMPEG-support not compiled in!" since I learned some prominent people who complained, that hdaudio does not work for them ;-) - Make SPACEKEY open up the "Add Strip"-Popup on the timeline and start playback in the preview window.
2006-03-26 21:36:42 +00:00
case TKEY: /* popup menu */
nr= pupmenu("Time value%t|Frames %x1|Seconds%x2");
if (nr>0) {
if(nr==1) sseq->flag |= SEQ_DRAWFRAMES;
else sseq->flag &= ~SEQ_DRAWFRAMES;
doredraw= 1;
}
break;
Initial revision
2002-10-12 11:37:38 +00:00
case XKEY:
case DELKEY:
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
if(G.qual==0) {
if(sseq->mainb) break;
if((G.qual==0))
del_seq();
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
}
}
if(doredraw) scrarea_queue_winredraw(curarea);
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void init_seqspace(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceSeq *sseq;
sseq= MEM_callocN(sizeof(SpaceSeq), "initseqspace");
BLI_addhead(&sa->spacedata, sseq);
sseq->spacetype= SPACE_SEQ;
* Adds configuration buttons for ffmpeg-output * Large sequencer rewrite to support: - Audio-tracks, which are not completely loaded into memory (hdaudio) but kept on disk instead. - A dependency tree, that builds only the Imbufs, that are really needed - Cleaner sequencer code - Per instance data in sequencer plugins (without this, the Dynamic Noise Reduction plugin would be impossible) - A Luma Waveform display - A U/V scatter plot display - Memcache limiting in sequencer - Buttons changed according to the boosted framecount limit
2006-02-05 19:30:37 +00:00
sseq->zoom= 4;
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
sseq->blockscale= 0.7;
* Adds configuration buttons for ffmpeg-output * Large sequencer rewrite to support: - Audio-tracks, which are not completely loaded into memory (hdaudio) but kept on disk instead. - A dependency tree, that builds only the Imbufs, that are really needed - Cleaner sequencer code - Per instance data in sequencer plugins (without this, the Dynamic Noise Reduction plugin would be impossible) - A Luma Waveform display - A U/V scatter plot display - Memcache limiting in sequencer - Buttons changed according to the boosted framecount limit
2006-02-05 19:30:37 +00:00
sseq->chanshown = 0;
Initial revision
2002-10-12 11:37:38 +00:00
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* seq space goes from (0,8) to (250, 0) */
Initial revision
2002-10-12 11:37:38 +00:00
sseq->v2d.tot.xmin= 0.0;
sseq->v2d.tot.ymin= 0.0;
sseq->v2d.tot.xmax= 250.0;
sseq->v2d.tot.ymax= 8.0;
sseq->v2d.cur= sseq->v2d.tot;
sseq->v2d.min[0]= 10.0;
sseq->v2d.min[1]= 4.0;
sseq->v2d.max[0]= 32000.0;
sseq->v2d.max[1]= MAXSEQ;
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
sseq->v2d.minzoom= 0.1f;
Initial revision
2002-10-12 11:37:38 +00:00
sseq->v2d.maxzoom= 10.0;
sseq->v2d.scroll= L_SCROLL+B_SCROLL;
sseq->v2d.keepaspect= 0;
sseq->v2d.keepzoom= 0;
sseq->v2d.keeptot= 0;
}
/* ******************** SPACE: ACTION ********************** */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
extern void drawactionspace(ScrArea *sa, void *spacedata);
extern void winqreadactionspace(struct ScrArea *sa, void *spacedata, struct BWinEvent *evt);
Initial revision
2002-10-12 11:37:38 +00:00
- for test: action space has no 'winchange' callback now. well. the callback is empty!
2003-06-21 21:34:40 +00:00
static void changeactionspace(ScrArea *sa, void *spacedata)
{
if(G.v2d==0) return;
- tinsy bit toned down new color for rvk sliders, to match the blender scheme - restored commented out test_view2d() call in changeactionspace(). this fixes the errors when opening a new or larger action window, with wrong layout/matrices (HOS: can you verify that doesnt break stuff?)
2003-07-22 12:49:32 +00:00
/* this sets the sub-areas correct, for scrollbars */
#bugfix #3682 NLA and Action window sometimes suffered from very weird scaled display, caused by making the subwindow very small. Was a missing check for small sizes. Also in this commit removal of debug print N_T left in for ipos.
2006-04-14 15:29:52 +00:00
test_view2d(G.v2d, sa->winx, sa->winy);
- for test: action space has no 'winchange' callback now. well. the callback is empty!
2003-06-21 21:34:40 +00:00
- tinsy bit toned down new color for rvk sliders, to match the blender scheme - restored commented out test_view2d() call in changeactionspace(). this fixes the errors when opening a new or larger action window, with wrong layout/matrices (HOS: can you verify that doesnt break stuff?)
2003-07-22 12:49:32 +00:00
/* action space uses weird matrices... local calculated in a function */
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
/* myortho2(G.v2d->cur.xmin, G.v2d->cur.xmax, G.v2d->cur.ymin, G.v2d->cur.ymax); */
- for test: action space has no 'winchange' callback now. well. the callback is empty!
2003-06-21 21:34:40 +00:00
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void init_actionspace(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceAction *saction;
saction= MEM_callocN(sizeof(SpaceAction), "initactionspace");
BLI_addhead(&sa->spacedata, saction);
saction->spacetype= SPACE_ACTION;
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
saction->blockscale= 0.7;
Initial revision
2002-10-12 11:37:38 +00:00
saction->v2d.tot.xmin= 1.0;
saction->v2d.tot.ymin= 0.0;
saction->v2d.tot.xmax= 1000.0;
saction->v2d.tot.ymax= 1000.0;
saction->v2d.cur.xmin= -5.0;
saction->v2d.cur.ymin= 0.0;
saction->v2d.cur.xmax= 65.0;
saction->v2d.cur.ymax= 1000.0;
saction->v2d.min[0]= 0.0;
saction->v2d.min[1]= 0.0;
- fixed 'HOME' option for action window. it had a wrong 'max zoom' setting. also provided a patch in do_versions to make saved action windows work. now you can zoom out nicely again!
2003-07-22 14:28:56 +00:00
saction->v2d.max[0]= 32000.0;
Initial revision
2002-10-12 11:37:38 +00:00
saction->v2d.max[1]= 1000.0;
- zooming in for action window increased 5 fold. (bug report #679). Also corrects old files for it.
2003-11-08 19:04:50 +00:00
saction->v2d.minzoom= 0.01;
saction->v2d.maxzoom= 50;
Initial revision
2002-10-12 11:37:38 +00:00
saction->v2d.scroll= R_SCROLL+B_SCROLL;
saction->v2d.keepaspect= 0;
saction->v2d.keepzoom= V2D_LOCKZOOM_Y;
saction->v2d.keeptot= 0;
}
big warning hunt commit lot of casts, added prototypes, missing includes and some true errors
2005-03-09 19:45:59 +00:00
static void free_actionspace(SpaceAction *saction)
Initial revision
2002-10-12 11:37:38 +00:00
{
/* don't free saction itself */
/* __PINFAKE */
/* if (saction->flag & SACTION_PIN)
if (saction->action)
saction->action->id.us --;
*/ /* end PINFAKE */
}
/* ******************** SPACE: FILE ********************** */
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void init_filespace(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceFile *sfile;
sfile= MEM_callocN(sizeof(SpaceFile), "initfilespace");
BLI_addhead(&sa->spacedata, sfile);
sfile->dir[0]= '/';
sfile->type= FILE_UNIX;
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
sfile->blockscale= 0.7;
Initial revision
2002-10-12 11:37:38 +00:00
sfile->spacetype= SPACE_FILE;
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void init_imaselspace(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceImaSel *simasel;
simasel= MEM_callocN(sizeof(SpaceImaSel), "initimaselspace");
BLI_addhead(&sa->spacedata, simasel);
simasel->spacetype= SPACE_IMASEL;
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
simasel->blockscale= 0.7;
Initial revision
2002-10-12 11:37:38 +00:00
simasel->mode = 7;
strcpy (simasel->dir, U.textudir); /* TON */
strcpy (simasel->file, "");
strcpy(simasel->fole, simasel->file);
strcpy(simasel->dor, simasel->dir);
simasel->first_sel_ima = 0;
simasel->hilite_ima = 0;
simasel->firstdir = 0;
simasel->firstfile = 0;
simasel->cmap = 0;
simasel->returnfunc = 0;
simasel->title[0] = 0;
clear_ima_dir(simasel);
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
/* simasel->cmap= IMB_loadiffmem((int*)datatoc_cmap_tga, IB_rect|IB_cmap); */
Initial revision
2002-10-12 11:37:38 +00:00
simasel->cmap= IMB_ibImageFromMemory((int *)datatoc_cmap_tga, datatoc_cmap_tga_size, IB_rect|IB_cmap);
if (!simasel->cmap) {
error("in console");
printf("Image select cmap file not found \n");
}
}
/* ******************** SPACE: SOUND ********************** */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
extern void drawsoundspace(ScrArea *sa, void *spacedata);
extern void winqreadsoundspace(struct ScrArea *sa, void *spacedata, struct BWinEvent *evt);
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void init_soundspace(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceSound *ssound;
ssound= MEM_callocN(sizeof(SpaceSound), "initsoundspace");
BLI_addhead(&sa->spacedata, ssound);
ssound->spacetype= SPACE_SOUND;
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
ssound->blockscale= 0.7;
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* sound space goes from (0,8) to (250, 0) */
Initial revision
2002-10-12 11:37:38 +00:00
ssound->v2d.tot.xmin= -4.0;
ssound->v2d.tot.ymin= -4.0;
ssound->v2d.tot.xmax= 250.0;
ssound->v2d.tot.ymax= 255.0;
ssound->v2d.cur.xmin= -4.0;
ssound->v2d.cur.ymin= -4.0;
ssound->v2d.cur.xmax= 50.0;
ssound->v2d.cur.ymax= 255.0;
ssound->v2d.min[0]= 1.0;
ssound->v2d.min[1]= 259.0;
ssound->v2d.max[0]= 32000.0;
ssound->v2d.max[1]= 259;
mostly done for both toets.c and space.c maybe a couple of odd cases here and there. I'll be cleaning tomorrow.
2003-10-28 03:08:50 +00:00
ssound->v2d.minzoom= 0.1f;
Initial revision
2002-10-12 11:37:38 +00:00
ssound->v2d.maxzoom= 10.0;
ssound->v2d.scroll= B_SCROLL;
ssound->v2d.keepaspect= 0;
ssound->v2d.keepzoom= 0;
ssound->v2d.keeptot= 0;
}
void free_soundspace(SpaceSound *ssound)
{
/* don't free ssound itself */
}
/* ******************** SPACE: IMAGE ********************** */
Compositing workflow upgrade; You now can set a Preview panel in the Image window, to define a sub-rect of an image to be processed. Works like the preview in 3D Window. Just press SHIFT+P to get it activated. Very nice speedup! This is how it works: - The compositor still uses the scene image size (including % setting) for Viewer or Composite output size - If a preview exists, it calculates the cropped rect from its position in the Image window, and stores that in the Scene render data - On composite execute, it copies only this part from the 'generator nodes', right now Images or Render Results. That makes the entire composite tree only using small rects, so it will execute fast. - Also the render window will only display the cropped rect, and on F12 only the cropped part is being executed - On rendering in background mode, the cropping is ignored though. Usability notes: - translating or zooming view will automatically invoke a recalculation - if you zoom in on details, the calculated rect will even become smaller - only one Imagewindow can have this Preview Panel, to prevent conflicts of what the cropped area should be. Compositing is on Scene level, not local per image window. (Note; 3D Previews are local per window!) - Closing the preview panel will invoke a full-size recalculation - All passes/layers from rendering are nicely cropped, including Z and vectors. The work to make the compositor do cropping was simple, but getting the Image window displaying correctly and get all events OK was a lot of work... indeed, we need to refactor Image Window usage once. Sorry for making the mess even bigger now. :) I've tried not to interfere with UV edit or Paint though... only when you're in compositing mode the panel will work. BUG fix: 3D Preview render didn't work when multiple layers were set in the current scene.
2006-02-09 11:07:04 +00:00
static void changeimagepace(ScrArea *sa, void *spacedata)
{
image_preview_event(2);
}
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void winqreadimagespace(ScrArea *sa, void *spacedata, BWinEvent *evt)
Initial revision
2002-10-12 11:37:38 +00:00
{
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
SpaceImage *sima= spacedata;
- Imagepaint code cleanup: - Move UVTEXTTOOL variables into global Gip struct (like Gvp for vertex paint). This will probably be moved into SpaceImage later, so it is saved with the .blend file. - Disable tool drawing. a better solution needs to be found. - Panel button layout is still the same, this will change. - Removed the NAN_TPT define, it has no use anymore.
2005-09-16 20:17:09 +00:00
unsigned short event= evt->event, origevent= evt->event;
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
short val= evt->val;
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
if(val==0) return;
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
if(uiDoBlocks(&sa->uiblocks, event)!=UI_NOTHING ) event= 0;
Initial revision
2002-10-12 11:37:38 +00:00
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
if (U.flag & USER_LMOUSESELECT) {
Bug fix #1893 Option to switch left/right mouse didn't work for floating panels. It then still selected stuff behind the button. Was due to using wrong variable for events.
2004-11-26 20:20:42 +00:00
if (event == LEFTMOUSE) {
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
event = RIGHTMOUSE;
Bug fix #1893 Option to switch left/right mouse didn't work for floating panels. It then still selected stuff behind the button. Was due to using wrong variable for events.
2004-11-26 20:20:42 +00:00
} else if (event == RIGHTMOUSE) {
* User preference to select with the left mouse button instead of right. This basically swaps left and right, in most window spaces so you can choose between: LMB: Cursor/time slider/paint - RMB: Select or LMB: Select - RMB: Cursor/time slider/paint Aimed at: 1. Newbies 2. 1 button mouse mac users 3. People like me who are sick of having to constantly keep putting their brains into different modes when switching between other apps and Blender :) Yes, the User Preferences window is a bit of a nightmare now, a layout cleanup will be forthcoming soon...
2004-07-16 01:34:19 +00:00
event = LEFTMOUSE;
}
}
bug fix: UV paint tool did not work with swapped mouse buttons in user prefs.
2005-09-12 19:20:53 +00:00
Potential fix for bug #4459: - UV editor hotkeys not working. Likely due to paint mode still being enabled without an image visible.
2006-06-24 21:45:50 +00:00
if (sima->image && (sima->flag & SI_DRAWTOOL)) {
Initial revision
2002-10-12 11:37:38 +00:00
switch(event) {
==paint== change CKEY to toggle paint on or off in image paint patch by Stephan Kassemeyer
2006-03-25 22:29:48 +00:00
case CKEY:
Potential fix for bug #4459: - UV editor hotkeys not working. Likely due to paint mode still being enabled without an image visible.
2006-06-24 21:45:50 +00:00
toggle_blockhandler(sa, IMAGE_HANDLER_PAINT, UI_PNL_UNSTOW);
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
scrarea_queue_winredraw(sa);
- Imagepaint code cleanup: - Move UVTEXTTOOL variables into global Gip struct (like Gvp for vertex paint). This will probably be moved into SpaceImage later, so it is saved with the .blend file. - Disable tool drawing. a better solution needs to be found. - Panel button layout is still the same, this will change. - Removed the NAN_TPT define, it has no use anymore.
2005-09-16 20:17:09 +00:00
break;
case LEFTMOUSE:
Texturepaint now supports all the imagepaint brush settings, with the exception of the clone tool. One level undo for image- and texturepaint, only storing those tiles that changed. Test to improve texturepaint performance using glTexSubImage2D, only enabled with 2^n sized textures and mipmapping off. Painting a 2048x2048 texture is then pretty smooth here, as long as the geometry is not too complex.
2006-08-27 13:29:00 +00:00
imagepaint_paint(origevent==LEFTMOUSE? L_MOUSE: R_MOUSE, 0);
- Imagepaint code cleanup: - Move UVTEXTTOOL variables into global Gip struct (like Gvp for vertex paint). This will probably be moved into SpaceImage later, so it is saved with the .blend file. - Disable tool drawing. a better solution needs to be found. - Panel button layout is still the same, this will change. - Removed the NAN_TPT define, it has no use anymore.
2005-09-16 20:17:09 +00:00
break;
case RIGHTMOUSE:
imagepaint_pick(origevent==LEFTMOUSE? L_MOUSE: R_MOUSE);
break;
Initial revision
2002-10-12 11:37:38 +00:00
}
}
else {
/* Draw tool is inactive */
switch(event) {
case LEFTMOUSE:
Orange: and now for the real exr fun: float buffer support in Image window! Image as loaded in Blender (from openexr.com): http://www.blender.org/bf/exrcurve1.jpg Image with different white point: http://www.blender.org/bf/exrcurve2.jpg Image with white and black point and a curve: http://www.blender.org/bf/exrcurve3.jpg Use SHIFT+click to set the black point, and CTRL+click for white point. The buttons in the panel work too, of course. The curves work after the black/white range was corrected, so you can stick to curves with a normal 0-1 range. There's also now a general color curve, marked with 'C' button. Note; this currently only maps the float colors to a visible 8 bits per channel rect. You can save it, but when the blender file loads the curve or mapping is not executed until you click in the curves... have to look at that still. Speed for this is also quite unoptimized... still WIP, but fun!
2006-01-09 23:52:51 +00:00
if(G.qual & LR_SHIFTKEY) {
if(G.sima->image && G.sima->image->tpageflag & IMA_TILES)
mouseco_to_curtile();
else
sima_sample_color();
}
else if(G.f & G_FACESELECT)
gesture();
else
sima_sample_color();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case RIGHTMOUSE:
New UV editor / Image Window features: - Draw Faces in the UV editor - Draw Faces, selected in the UV editor, in the 3D view - Draw Shadow Mesh in the UV editor (for faces unselected in the 3D view) - Select Linked UVs (LKEY) - Unlink Selection (Alt+LKEY) - Stick (Local) UVs to Mesh Vertex on selection - Active Face Select - Reload Image - Show / Hide Faces in the UV editor (H, Shift+H, Alt+H) - Proportional Editing (O, Shift+O) - Stitch, Limit Stitch UVs (snap by mesh vertex) - Weld / Align UVs (WKEY) - UVs Snap to Pixels on/off switch - RMB in Texture Paint or Vertex Paint mode picks color - Select Inverse in Faceselect mode I hope these are all the features that were commited. The new UV Mapping panel (and code) will follow later.
2004-04-01 12:55:12 +00:00
if(G.f & G_FACESELECT)
mouse_select_sima();
else if(G.f & (G_VERTEXPAINT|G_TEXTUREPAINT))
sample_vpaint();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case AKEY:
Orange branch commit. This commit adds new underlying uv unwrapper code, intended to be more extensible. At the moment this has a re-implementation of LSCM. This has not been activated yet, since it doesn't add anything new. What's new is the stretch minimize tool from tuhopuu. It works by selecting some some uv's in the uv editor window, and then pressing ctrl+V. The uv's on the boundary stay fixed. More stuff will follow as I port it over & fix it.
2005-12-01 02:09:21 +00:00
select_swap_tface_uv();
Initial revision
2002-10-12 11:37:38 +00:00
break;
case BKEY:
Adding some simple but very convenient selection functionality for the UV editor: * A "Select->Pinned UVs" command (Shift P) that selects all the visible pinned UVs * A "Select->Border Select Pinned" tool (Shift B) that works just like the normal border select tool, but only acts on pinned UVs This is really useful when using LSCM, I only want to touch the pinned UVs and then recalculate.
2005-10-20 10:31:02 +00:00
if(G.qual==LR_SHIFTKEY)
borderselect_sima(UV_SELECT_PINNED);
else if((G.qual==0))
borderselect_sima(UV_SELECT_ALL);
Initial revision
2002-10-12 11:37:38 +00:00
break;
Added hotkeys for sticky / face select in UV editor: Sticky UVs: Ctrl+C Local Stikcy UVs: Shift+C Active Face Select: C Constrained Scaling / Grabbing in the UV editor. Press XKEY or YKEY to scale or move only in X or Y direction. XKEY and YKEY previously did mirroring while scaling. Now mirroring can be done using the MKEY. Grab, Rotate, Scale, Weld / Align and Mirror were added to a new Transform sub-menu of the UVs menu.
2004-04-05 13:22:55 +00:00
case CKEY:
if(G.qual==LR_CTRLKEY)
toggle_uv_select('s');
else if(G.qual==LR_SHIFTKEY)
toggle_uv_select('l');
else if(G.qual==LR_ALTKEY)
toggle_uv_select('o');
else
toggle_uv_select('f');
break;
Added LSCM UV Unwrapping: http://www.loria.fr/~levy/Galleries/LSCM/index.html http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf Implementation Least Squares Conformal Maps parameterization, based on chapter 2 of: Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002, July 2002. Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define where a mesh will be cut when executing LSCM unwrapping. Seams can be marked and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark the selected edges as seams. Select Linked in Face Select Mode now only selects linked faces if no seams separate them. So if seams are defined, this will now select the 'face group' defined by the seams. Hotkey is still LKEY. LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local angles). Based on seams, the selected faces will be 'cut'. If multiple 'face groups' are selected, they will be unwrapped separately and packed in the image rectangle in the UV Editor. Packing uses a simple and fast algorithm, only designed to avoid having overlapping faces. LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel. Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then executed, these UV's will stay in place, allowing to tweak the solution. PKEY and ALT+PKEY will respectively pin and unpin selected UV's. Face Select Mode Drawing Changes: - Draw Seams option to enable disable drawing of seams - Draw Faces option to enable drawing of selected faces in transparent purple - Draw Hidden Edges option to enable drawing of edges of hidden faces - Draw Edges option to enable drawing of edges of visible faces The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
case EKEY :
UV Editor Tweaks: - Set local sticky in the uv editor as default. - Don't do live unwrap on fully selected charts or charts with no pins selected. - Fixed bug with live unwrap not respecting transform cancel in some cases. - "View Home" didn't work without an image. - Move UV Calculation settings (cube size, cylinder radius, ..) into the scene toolsettings, instead of global variables - Remove the name LSCM from the UI (and python docs on seams), and replace it with 'Unwrap', with upcoming ABF this didn't make sense anymore. - Move the Old/New LSCM switch into the UV Calculation panel. New LSCM is the default now. Also renamed LSCM there to "Conformal". - Made some room in the UV Calculation panel by removing the buttons to execute the UV calculation, only leaving the settings. Fill Holes: - LSCM now has an option to fill holes in the chart before unwrapping. This on by default, and enables two things: - Prevent internal overlaps (e.g. eyes, mouth) for LSCM unwrapping. - Allow the internal boundaries to move freely during stretch minimize. - The possibility to switch it off is there because it is not always possible to define which the outer boundary is. For example with an open cylinder where there are two identical holes.
2006-02-05 14:12:45 +00:00
if(okee("Unwrap"))
Seam Cutting in Faceselect Mode: - Mark Border Seam: mark edges on the border of face selection as seam. - Clear Seam: clears seams in selected faces. Hotkey: Ctrl+E - Alt+RMB Click: mark/clear edge as seam - Alt+Shift+RMB Click: mark/clear seams along the shortest/straightest path from last marked seam. The cost of the path also includes some measure of 'straightness' next to the typical distance to make things work more predicatble and edgeloop friendly. Note that this cuts a path from edge to edge, not vertex to vertex. That gives some nice control over the direction of the seam. Also includes: - Removed old LSCM code. - Fix updates glitches with DerivedMesh/Subsurf drawing in FaceSelect mode. Now there's a drawMappedFacesTex instead of drawFacesTex. - Minimize Stretch menu entry called Limit Stitch. - Removed the lasttface global, was being set before it was used anyway, so might as wel return from a function. - Moved some backbuf sampling code to drawview.c from editmesh, so it can be used by Faceselect and VPaint. - Use BLI_heap in parametrizer.c.
2006-02-08 21:01:00 +00:00
unwrap_lscm(0);
Added LSCM UV Unwrapping: http://www.loria.fr/~levy/Galleries/LSCM/index.html http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf Implementation Least Squares Conformal Maps parameterization, based on chapter 2 of: Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002, July 2002. Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define where a mesh will be cut when executing LSCM unwrapping. Seams can be marked and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark the selected edges as seams. Select Linked in Face Select Mode now only selects linked faces if no seams separate them. So if seams are defined, this will now select the 'face group' defined by the seams. Hotkey is still LKEY. LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local angles). Based on seams, the selected faces will be 'cut'. If multiple 'face groups' are selected, they will be unwrapped separately and packed in the image rectangle in the UV Editor. Packing uses a simple and fast algorithm, only designed to avoid having overlapping faces. LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel. Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then executed, these UV's will stay in place, allowing to tweak the solution. PKEY and ALT+PKEY will respectively pin and unpin selected UV's. Face Select Mode Drawing Changes: - Draw Seams option to enable disable drawing of seams - Draw Faces option to enable drawing of selected faces in transparent purple - Draw Hidden Edges option to enable drawing of edges of hidden faces - Draw Edges option to enable drawing of edges of visible faces The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
break;
Initial revision
2002-10-12 11:37:38 +00:00
case GKEY:
Bretch's patch for 2D transform. Thanks Using new transform code to handle UV window. With the ground work done, Transform could more easily be extended to handle IPO window now. Tracker item: http://projects.blender.org/tracker/?func=detail&atid=127&aid=2946&group_id=9
2005-08-23 18:13:30 +00:00
if((G.qual==0) && is_uv_tface_editing_allowed()) {
initTransform(TFM_TRANSLATION, CTX_NONE);
Transform();
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
New UV editor / Image Window features: - Draw Faces in the UV editor - Draw Faces, selected in the UV editor, in the 3D view - Draw Shadow Mesh in the UV editor (for faces unselected in the 3D view) - Select Linked UVs (LKEY) - Unlink Selection (Alt+LKEY) - Stick (Local) UVs to Mesh Vertex on selection - Active Face Select - Reload Image - Show / Hide Faces in the UV editor (H, Shift+H, Alt+H) - Proportional Editing (O, Shift+O) - Stitch, Limit Stitch UVs (snap by mesh vertex) - Weld / Align UVs (WKEY) - UVs Snap to Pixels on/off switch - RMB in Texture Paint or Vertex Paint mode picks color - Select Inverse in Faceselect mode I hope these are all the features that were commited. The new UV Mapping panel (and code) will follow later.
2004-04-01 12:55:12 +00:00
case HKEY:
if(G.qual==LR_ALTKEY)
reveal_tface_uv();
else if((G.qual==LR_SHIFTKEY))
hide_tface_uv(1);
else if((G.qual==0))
hide_tface_uv(0);
break;
case LKEY:
Merging over some uv editor tweaks from tuhopuu: - Moved Weld/Align out of transform code, now it's a menu. - Removed confirmation popups for LSCM unwrapping in the uv editor, didn't make sense anymore now we have undo. - Extended select linked, to work more like it does in edit mode: - L: select linked uvs/faces under the mouse - Shift+L: select/deselect linked uvs/faces under the mouse (like shift+click for selecting single uvs/faces) - Ctrl+L: how L worked before - More accurate uv selection: when selecting one uv from a group of uvs that are in the same position, it now selects the uv belonging to the face the mouse is over, instead of a random uv. - 'View Selected' (numpad .-key) for both faceselect mode and the uv editor.
2005-04-23 01:36:08 +00:00
if(G.qual==0)
select_linked_tface_uv(0);
else if(G.qual==LR_SHIFTKEY)
select_linked_tface_uv(1);
else if(G.qual==LR_CTRLKEY)
select_linked_tface_uv(2);
Added hotkeys for sticky / face select in UV editor: Sticky UVs: Ctrl+C Local Stikcy UVs: Shift+C Active Face Select: C Constrained Scaling / Grabbing in the UV editor. Press XKEY or YKEY to scale or move only in X or Y direction. XKEY and YKEY previously did mirroring while scaling. Now mirroring can be done using the MKEY. Grab, Rotate, Scale, Weld / Align and Mirror were added to a new Transform sub-menu of the UVs menu.
2004-04-05 13:22:55 +00:00
else if(G.qual==LR_ALTKEY)
unlink_selection();
break;
case MKEY:
if((G.qual==0))
mirrormenu_tface_uv();
break;
Initial revision
2002-10-12 11:37:38 +00:00
case NKEY:
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
if(G.qual==LR_CTRLKEY)
replace_names_but();
Initial revision
2002-10-12 11:37:38 +00:00
break;
New UV editor / Image Window features: - Draw Faces in the UV editor - Draw Faces, selected in the UV editor, in the 3D view - Draw Shadow Mesh in the UV editor (for faces unselected in the 3D view) - Select Linked UVs (LKEY) - Unlink Selection (Alt+LKEY) - Stick (Local) UVs to Mesh Vertex on selection - Active Face Select - Reload Image - Show / Hide Faces in the UV editor (H, Shift+H, Alt+H) - Proportional Editing (O, Shift+O) - Stitch, Limit Stitch UVs (snap by mesh vertex) - Weld / Align UVs (WKEY) - UVs Snap to Pixels on/off switch - RMB in Texture Paint or Vertex Paint mode picks color - Select Inverse in Faceselect mode I hope these are all the features that were commited. The new UV Mapping panel (and code) will follow later.
2004-04-01 12:55:12 +00:00
case OKEY:
if (G.qual==LR_SHIFTKEY) {
* Proportional edit mode 'random' falloff This is another proportional edit falloff that slightly randomises the influence. It's not strictly random, it's blended with linear falloff so that it's a bit smoother. The nice thing is that it works with all transforms, axis locking etc, including the special ones like to sphere, shrink/fatten/etc. It can be used for all sorts of things like roughening surfaces. I most recently used it to add a bit of randomness to the folds of some cloth. I made a short demo video here: http://mke3.net/blender/etc/prop_random-h264.mov Also included nicer icons for the falloff types.
2006-09-25 05:15:19 +00:00
G.scene->prop_mode = (G.scene->prop_mode+1)%7;
Added the 4 new proportional editing modes also to the uv editor transform. Eventually the uv editor should use the new transform code and get these automatically, but until that's done this might fix bug #2920.
2005-08-12 15:33:06 +00:00
allqueue(REDRAWHEADERS, 0);
New UV editor / Image Window features: - Draw Faces in the UV editor - Draw Faces, selected in the UV editor, in the 3D view - Draw Shadow Mesh in the UV editor (for faces unselected in the 3D view) - Select Linked UVs (LKEY) - Unlink Selection (Alt+LKEY) - Stick (Local) UVs to Mesh Vertex on selection - Active Face Select - Reload Image - Show / Hide Faces in the UV editor (H, Shift+H, Alt+H) - Proportional Editing (O, Shift+O) - Stitch, Limit Stitch UVs (snap by mesh vertex) - Weld / Align UVs (WKEY) - UVs Snap to Pixels on/off switch - RMB in Texture Paint or Vertex Paint mode picks color - Select Inverse in Faceselect mode I hope these are all the features that were commited. The new UV Mapping panel (and code) will follow later.
2004-04-01 12:55:12 +00:00
}
else if((G.qual==0)) {
UI cleanup work; Proportional edit: - Proportional mode added to header as button/menu. Including new option to have only connected geometry influenced. - Added icons for proportional & proportional modes - Make proportional edit data part of Scene, so all gets saved. The Global flag G_PROPORTIONAL was removed - Made sure #defines get used properly, also tweaked order for proportional so it starts with regular 'smooth' by default. - Use ALT+O in editmode to switch to new proportional 'connected' mode Other UI stuff: - in EditMode, the layer buttons get hidden... the amount of icons in 3d header grows to fast. :) - made less ugly icons for the Manipulators. Still can be better. - Added alpha-filter for pre-processing Icon-image, giving nicer display of icon-antialising on dark or bright backdrops - disabled Manipulators when in editmode, and current layers don't show the edited data. - Added the value used to define Normal size (editmode draw) in Scene too, so it gets saved.
2005-05-03 10:54:42 +00:00
G.scene->proportional= !G.scene->proportional;
New UV editor / Image Window features: - Draw Faces in the UV editor - Draw Faces, selected in the UV editor, in the 3D view - Draw Shadow Mesh in the UV editor (for faces unselected in the 3D view) - Select Linked UVs (LKEY) - Unlink Selection (Alt+LKEY) - Stick (Local) UVs to Mesh Vertex on selection - Active Face Select - Reload Image - Show / Hide Faces in the UV editor (H, Shift+H, Alt+H) - Proportional Editing (O, Shift+O) - Stitch, Limit Stitch UVs (snap by mesh vertex) - Weld / Align UVs (WKEY) - UVs Snap to Pixels on/off switch - RMB in Texture Paint or Vertex Paint mode picks color - Select Inverse in Faceselect mode I hope these are all the features that were commited. The new UV Mapping panel (and code) will follow later.
2004-04-01 12:55:12 +00:00
}
break;
Added LSCM UV Unwrapping: http://www.loria.fr/~levy/Galleries/LSCM/index.html http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf Implementation Least Squares Conformal Maps parameterization, based on chapter 2 of: Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002, July 2002. Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define where a mesh will be cut when executing LSCM unwrapping. Seams can be marked and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark the selected edges as seams. Select Linked in Face Select Mode now only selects linked faces if no seams separate them. So if seams are defined, this will now select the 'face group' defined by the seams. Hotkey is still LKEY. LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local angles). Based on seams, the selected faces will be 'cut'. If multiple 'face groups' are selected, they will be unwrapped separately and packed in the image rectangle in the UV Editor. Packing uses a simple and fast algorithm, only designed to avoid having overlapping faces. LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel. Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then executed, these UV's will stay in place, allowing to tweak the solution. PKEY and ALT+PKEY will respectively pin and unpin selected UV's. Face Select Mode Drawing Changes: - Draw Seams option to enable disable drawing of seams - Draw Faces option to enable drawing of selected faces in transparent purple - Draw Hidden Edges option to enable drawing of edges of hidden faces - Draw Edges option to enable drawing of edges of visible faces The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
case PKEY:
Compositing workflow upgrade; You now can set a Preview panel in the Image window, to define a sub-rect of an image to be processed. Works like the preview in 3D Window. Just press SHIFT+P to get it activated. Very nice speedup! This is how it works: - The compositor still uses the scene image size (including % setting) for Viewer or Composite output size - If a preview exists, it calculates the cropped rect from its position in the Image window, and stores that in the Scene render data - On composite execute, it copies only this part from the 'generator nodes', right now Images or Render Results. That makes the entire composite tree only using small rects, so it will execute fast. - Also the render window will only display the cropped rect, and on F12 only the cropped part is being executed - On rendering in background mode, the cropping is ignored though. Usability notes: - translating or zooming view will automatically invoke a recalculation - if you zoom in on details, the calculated rect will even become smaller - only one Imagewindow can have this Preview Panel, to prevent conflicts of what the cropped area should be. Compositing is on Scene level, not local per image window. (Note; 3D Previews are local per window!) - Closing the preview panel will invoke a full-size recalculation - All passes/layers from rendering are nicely cropped, including Z and vectors. The work to make the compositor do cropping was simple, but getting the Image window displaying correctly and get all events OK was a lot of work... indeed, we need to refactor Image Window usage once. Sorry for making the mess even bigger now. :) I've tried not to interfere with UV edit or Paint though... only when you're in compositing mode the panel will work. BUG fix: 3D Preview render didn't work when multiple layers were set in the current scene.
2006-02-09 11:07:04 +00:00
if(G.f & G_FACESELECT) {
if(G.qual==LR_SHIFTKEY)
select_pinned_tface_uv();
else if(G.qual==LR_ALTKEY)
pin_tface_uv(0);
else
pin_tface_uv(1);
}
else {
if(G.qual==LR_SHIFTKEY) {
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
toggle_blockhandler(sa, IMAGE_HANDLER_PREVIEW, 0);
scrarea_queue_winredraw(sa);
Compositing workflow upgrade; You now can set a Preview panel in the Image window, to define a sub-rect of an image to be processed. Works like the preview in 3D Window. Just press SHIFT+P to get it activated. Very nice speedup! This is how it works: - The compositor still uses the scene image size (including % setting) for Viewer or Composite output size - If a preview exists, it calculates the cropped rect from its position in the Image window, and stores that in the Scene render data - On composite execute, it copies only this part from the 'generator nodes', right now Images or Render Results. That makes the entire composite tree only using small rects, so it will execute fast. - Also the render window will only display the cropped rect, and on F12 only the cropped part is being executed - On rendering in background mode, the cropping is ignored though. Usability notes: - translating or zooming view will automatically invoke a recalculation - if you zoom in on details, the calculated rect will even become smaller - only one Imagewindow can have this Preview Panel, to prevent conflicts of what the cropped area should be. Compositing is on Scene level, not local per image window. (Note; 3D Previews are local per window!) - Closing the preview panel will invoke a full-size recalculation - All passes/layers from rendering are nicely cropped, including Z and vectors. The work to make the compositor do cropping was simple, but getting the Image window displaying correctly and get all events OK was a lot of work... indeed, we need to refactor Image Window usage once. Sorry for making the mess even bigger now. :) I've tried not to interfere with UV edit or Paint though... only when you're in compositing mode the panel will work. BUG fix: 3D Preview render didn't work when multiple layers were set in the current scene.
2006-02-09 11:07:04 +00:00
}
}
Added LSCM UV Unwrapping: http://www.loria.fr/~levy/Galleries/LSCM/index.html http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf Implementation Least Squares Conformal Maps parameterization, based on chapter 2 of: Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002, July 2002. Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define where a mesh will be cut when executing LSCM unwrapping. Seams can be marked and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark the selected edges as seams. Select Linked in Face Select Mode now only selects linked faces if no seams separate them. So if seams are defined, this will now select the 'face group' defined by the seams. Hotkey is still LKEY. LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local angles). Based on seams, the selected faces will be 'cut'. If multiple 'face groups' are selected, they will be unwrapped separately and packed in the image rectangle in the UV Editor. Packing uses a simple and fast algorithm, only designed to avoid having overlapping faces. LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel. Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then executed, these UV's will stay in place, allowing to tweak the solution. PKEY and ALT+PKEY will respectively pin and unpin selected UV's. Face Select Mode Drawing Changes: - Draw Seams option to enable disable drawing of seams - Draw Faces option to enable drawing of selected faces in transparent purple - Draw Hidden Edges option to enable drawing of edges of hidden faces - Draw Edges option to enable drawing of edges of visible faces The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
break;
Initial revision
2002-10-12 11:37:38 +00:00
case RKEY:
Bretch's patch for 2D transform. Thanks Using new transform code to handle UV window. With the ground work done, Transform could more easily be extended to handle IPO window now. Tracker item: http://projects.blender.org/tracker/?func=detail&atid=127&aid=2946&group_id=9
2005-08-23 18:13:30 +00:00
if((G.qual==0) && is_uv_tface_editing_allowed()) {
initTransform(TFM_ROTATION, CTX_NONE);
Transform();
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
case SKEY:
Bretch's patch for 2D transform. Thanks Using new transform code to handle UV window. With the ground work done, Transform could more easily be extended to handle IPO window now. Tracker item: http://projects.blender.org/tracker/?func=detail&atid=127&aid=2946&group_id=9
2005-08-23 18:13:30 +00:00
if((G.qual==0) && is_uv_tface_editing_allowed()) {
initTransform(TFM_RESIZE, CTX_NONE);
Transform();
}
Initial revision
2002-10-12 11:37:38 +00:00
break;
New UV editor / Image Window features: - Draw Faces in the UV editor - Draw Faces, selected in the UV editor, in the 3D view - Draw Shadow Mesh in the UV editor (for faces unselected in the 3D view) - Select Linked UVs (LKEY) - Unlink Selection (Alt+LKEY) - Stick (Local) UVs to Mesh Vertex on selection - Active Face Select - Reload Image - Show / Hide Faces in the UV editor (H, Shift+H, Alt+H) - Proportional Editing (O, Shift+O) - Stitch, Limit Stitch UVs (snap by mesh vertex) - Weld / Align UVs (WKEY) - UVs Snap to Pixels on/off switch - RMB in Texture Paint or Vertex Paint mode picks color - Select Inverse in Faceselect mode I hope these are all the features that were commited. The new UV Mapping panel (and code) will follow later.
2004-04-01 12:55:12 +00:00
case VKEY:
if((G.qual==0))
stitch_uv_tface(0);
else if(G.qual==LR_SHIFTKEY)
stitch_uv_tface(1);
Orange branch commit. This commit adds new underlying uv unwrapper code, intended to be more extensible. At the moment this has a re-implementation of LSCM. This has not been activated yet, since it doesn't add anything new. What's new is the stretch minimize tool from tuhopuu. It works by selecting some some uv's in the uv editor window, and then pressing ctrl+V. The uv's on the boundary stay fixed. More stuff will follow as I port it over & fix it.
2005-12-01 02:09:21 +00:00
else if(G.qual==LR_CTRLKEY)
minimize_stretch_tface_uv();
New UV editor / Image Window features: - Draw Faces in the UV editor - Draw Faces, selected in the UV editor, in the 3D view - Draw Shadow Mesh in the UV editor (for faces unselected in the 3D view) - Select Linked UVs (LKEY) - Unlink Selection (Alt+LKEY) - Stick (Local) UVs to Mesh Vertex on selection - Active Face Select - Reload Image - Show / Hide Faces in the UV editor (H, Shift+H, Alt+H) - Proportional Editing (O, Shift+O) - Stitch, Limit Stitch UVs (snap by mesh vertex) - Weld / Align UVs (WKEY) - UVs Snap to Pixels on/off switch - RMB in Texture Paint or Vertex Paint mode picks color - Select Inverse in Faceselect mode I hope these are all the features that were commited. The new UV Mapping panel (and code) will follow later.
2004-04-01 12:55:12 +00:00
break;
case WKEY:
Merging over some uv editor tweaks from tuhopuu: - Moved Weld/Align out of transform code, now it's a menu. - Removed confirmation popups for LSCM unwrapping in the uv editor, didn't make sense anymore now we have undo. - Extended select linked, to work more like it does in edit mode: - L: select linked uvs/faces under the mouse - Shift+L: select/deselect linked uvs/faces under the mouse (like shift+click for selecting single uvs/faces) - Ctrl+L: how L worked before - More accurate uv selection: when selecting one uv from a group of uvs that are in the same position, it now selects the uv belonging to the face the mouse is over, instead of a random uv. - 'View Selected' (numpad .-key) for both faceselect mode and the uv editor.
2005-04-23 01:36:08 +00:00
weld_align_menu_tface_uv();
New UV editor / Image Window features: - Draw Faces in the UV editor - Draw Faces, selected in the UV editor, in the 3D view - Draw Shadow Mesh in the UV editor (for faces unselected in the 3D view) - Select Linked UVs (LKEY) - Unlink Selection (Alt+LKEY) - Stick (Local) UVs to Mesh Vertex on selection - Active Face Select - Reload Image - Show / Hide Faces in the UV editor (H, Shift+H, Alt+H) - Proportional Editing (O, Shift+O) - Stitch, Limit Stitch UVs (snap by mesh vertex) - Weld / Align UVs (WKEY) - UVs Snap to Pixels on/off switch - RMB in Texture Paint or Vertex Paint mode picks color - Select Inverse in Faceselect mode I hope these are all the features that were commited. The new UV Mapping panel (and code) will follow later.
2004-04-01 12:55:12 +00:00
break;
Add "View Selected" (numpad .-key) for faceselect mode and the uv editor. Also includes some 2d vector operations (subtract, dot, normalise).
2005-04-22 20:16:02 +00:00
case PADPERIOD:
if(G.qual==0)
image_viewcentre();
break;
Initial revision
2002-10-12 11:37:38 +00:00
}
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
Little showstopper; the fix for enabling typing (3d) text in 3d window with 'emulate numpad' disabled plus/minus hotkey in imagewindow for zoom. Added it also for oops. More problems with it for other spaces makes it important te review for next release. But this is for people who use laptops or minimalistic keyboards... :)
2004-08-05 10:54:00 +00:00
/* least intrusive nonumpad hack, only for plus/minus */
if (U.flag & USER_NONUMPAD) {
event= convert_for_nonumpad(event);
}
Initial revision
2002-10-12 11:37:38 +00:00
/* Events handled always (whether the draw tool is active or not) */
switch (event) {
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
case UI_BUT_EVENT:
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
do_imagebuts(val); /* drawimage.c */
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
break;
case MIDDLEMOUSE:
Make view translation and zooming 'smooth' in the uv editor. Power-of-two zoom levels can be found in the View > View Navigation menu. Also Ctrl+MMB zooming was added. Added the E-key, LSCM unwrap popup back again.
2005-04-24 11:57:23 +00:00
if((G.qual==LR_CTRLKEY) || ((U.flag & USER_TWOBUTTONMOUSE) && (G.qual==(LR_ALTKEY|LR_CTRLKEY))))
image_viewmove(1);
else
image_viewmove(0);
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
break;
Make view translation and zooming 'smooth' in the uv editor. Power-of-two zoom levels can be found in the View > View Navigation menu. Also Ctrl+MMB zooming was added. Added the E-key, LSCM unwrap popup back again.
2005-04-24 11:57:23 +00:00
case WHEELUPMOUSE: case WHEELDOWNMOUSE: case PADPLUSKEY: case PADMINUS:
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
case PAD1: case PAD2: case PAD4: case PAD8:
image_viewzoom(event, (G.qual & LR_SHIFTKEY)==0);
scrarea_queue_winredraw(sa);
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
break;
case HOMEKEY:
if((G.qual==0))
image_home();
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
break;
case NKEY:
Some UV/Image window changes: - A new Save image function, next to the existing Save As. - Shortcut keys Alt+S, Alt+R, Alt+O and Alt+N for Save, Reload, Open and New image respectively, consistent with the text editor window. - Hide Select and UVs menus when UV editing isn't active. - Removed duplicate and unused code, also moved some functions.
2006-09-25 22:00:52 +00:00
if(G.qual==LR_ALTKEY) {
new_image_sima();
}
else if(G.qual==0) {
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
toggle_blockhandler(sa, IMAGE_HANDLER_PROPERTIES, UI_PNL_TO_MOUSE);
scrarea_queue_winredraw(sa);
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
}
break;
Some UV/Image window changes: - A new Save image function, next to the existing Save As. - Shortcut keys Alt+S, Alt+R, Alt+O and Alt+N for Save, Reload, Open and New image respectively, consistent with the text editor window. - Hide Select and UVs menus when UV editing isn't active. - Removed duplicate and unused code, also moved some functions.
2006-09-25 22:00:52 +00:00
case OKEY:
if (G.qual & LR_ALTKEY)
open_image_sima(G.qual & LR_CTRLKEY);
break;
case RKEY:
if(G.qual==LR_ALTKEY)
reload_image_sima();
break;
case SKEY:
if(G.qual & LR_ALTKEY)
save_image_sima();
break;
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
case ESCKEY:
if(sima->flag & SI_PREVSPACE) {
/* only allow ESC once */
sima->flag &= ~SI_PREVSPACE;
sima= sa->spacedata.first;
if(sima->next) {
SpaceLink *sl;
BLI_remlink(&sa->spacedata, sima);
BLI_addtail(&sa->spacedata, sima);
sl= sa->spacedata.first;
newspace(sa, sl->spacetype);
}
}
if(sima->flag & SI_FULLWINDOW) {
sima->flag &= ~SI_FULLWINDOW;
if(sa->full)
area_fullscreen();
}
Initial revision
2002-10-12 11:37:38 +00:00
}
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void init_imagespace(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceImage *sima;
sima= MEM_callocN(sizeof(SpaceImage), "initimaspace");
BLI_addhead(&sa->spacedata, sima);
sima->spacetype= SPACE_IMAGE;
sima->zoom= 1;
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
sima->blockscale= 0.7;
UV Editor Tweaks: - Set local sticky in the uv editor as default. - Don't do live unwrap on fully selected charts or charts with no pins selected. - Fixed bug with live unwrap not respecting transform cancel in some cases. - "View Home" didn't work without an image. - Move UV Calculation settings (cube size, cylinder radius, ..) into the scene toolsettings, instead of global variables - Remove the name LSCM from the UI (and python docs on seams), and replace it with 'Unwrap', with upcoming ABF this didn't make sense anymore. - Move the Old/New LSCM switch into the UV Calculation panel. New LSCM is the default now. Also renamed LSCM there to "Conformal". - Made some room in the UV Calculation panel by removing the buttons to execute the UV calculation, only leaving the settings. Fill Holes: - LSCM now has an option to fill holes in the chart before unwrapping. This on by default, and enables two things: - Prevent internal overlaps (e.g. eyes, mouth) for LSCM unwrapping. - Allow the internal boundaries to move freely during stretch minimize. - The possibility to switch it off is there because it is not always possible to define which the outer boundary is. For example with an open cylinder where there are two identical holes.
2006-02-05 14:12:45 +00:00
sima->flag = SI_LOCALSTICKY;
Initial revision
2002-10-12 11:37:38 +00:00
}
/* ******************** SPACE: IMASEL ********************** */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
extern void drawimaselspace(ScrArea *sa, void *spacedata);
extern void winqreadimaselspace(struct ScrArea *sa, void *spacedata, struct BWinEvent *evt);
Initial revision
2002-10-12 11:37:38 +00:00
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* everything to imasel.c */
Initial revision
2002-10-12 11:37:38 +00:00
/* ******************** SPACE: OOPS ********************** */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
extern void drawoopsspace(ScrArea *sa, void *spacedata);
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
static void winqreadoopsspace(ScrArea *sa, void *spacedata, BWinEvent *evt)
Initial revision
2002-10-12 11:37:38 +00:00
{
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
unsigned short event= evt->event;
short val= evt->val;
Initial revision
2002-10-12 11:37:38 +00:00
SpaceOops *soops= curarea->spacedata.first;
View2D *v2d= &soops->v2d;
float dx, dy;
if(val==0) return;
Outliner features: - Rename! CTRL+leftmouse click on name, makes it a text button. Works for all items as currently being displayed. Most work was doing the Bones, which is a nightmare :) But it uses same code as buttons in Armature-Editmode now, without even needing EditMode :) When renaming a bone, the Outliner makes the Object active though. - PageUp / PageDown keys Do what you expect.
2004-10-11 11:54:14 +00:00
if( uiDoBlocks(&sa->uiblocks, event)!=UI_NOTHING ) event= 0;
Initial revision
2002-10-12 11:37:38 +00:00
Little showstopper; the fix for enabling typing (3d) text in 3d window with 'emulate numpad' disabled plus/minus hotkey in imagewindow for zoom. Added it also for oops. More problems with it for other spaces makes it important te review for next release. But this is for people who use laptops or minimalistic keyboards... :)
2004-08-05 10:54:00 +00:00
if (U.flag & USER_NONUMPAD) {
event= convert_for_nonumpad(event);
}
Initial revision
2002-10-12 11:37:38 +00:00
Made the outliner use leftmouse (as it is right now for default rightmouse select) for activating, expanding the tree, etc regardless of the mouse button selection user pref.
2004-10-07 03:04:20 +00:00
/* keep leftmouse select for outliner, regardless of user pref */
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
if(soops->type==SO_OUTLINER) {
switch(event) {
case LEFTMOUSE:
Outliner features: - Rename! CTRL+leftmouse click on name, makes it a text button. Works for all items as currently being displayed. Most work was doing the Bones, which is a nightmare :) But it uses same code as buttons in Armature-Editmode now, without even needing EditMode :) When renaming a bone, the Outliner makes the Object active though. - PageUp / PageDown keys Do what you expect.
2004-10-11 11:54:14 +00:00
outliner_mouse_event(sa, event);
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
break;
case MIDDLEMOUSE:
case WHEELUPMOUSE:
case WHEELDOWNMOUSE:
view2dmove(event); /* in drawipo.c */
break;
- Added Outliner selection As a means to indicate items in the Outliner to do operations on, you can select with RMB items. Works like FileSelect here. Since selection in Outliner is only on outliner level, no further UI updates happen. That is reserved for LMB actions. Implemented right now are only few operations... they can be called up with the WKEY (the famous spare key :) - if objects selected, a menu appears with choices - if materials or textures selected, a meny appears to unlink them If you make mixed or confusing selections you get a warning message. TODO: add selection color in theme, and of course more operations.
2004-10-10 11:33:19 +00:00
case RIGHTMOUSE:
Huge commit: VERSE - All code is in #ifdef ... #endif - Only make build system is supported and you have to add: export WITH_VERSE=true to user-def.mk file - Blender can share only mesh objects and bitmaps now - More informations can be found at wiki: http://mediawiki.blender.org/index.php/BlenderDev/VerseIntegrationToBlender http://mediawiki.blender.org/index.php/BlenderDev/VerseIntegrationToBlenderUserDoc I hope, that I didn't forget at anything
2006-08-20 15:22:56 +00:00
#ifdef WITH_VERSE
/* evil hack due to verse */
outliner_mouse_event(sa, event);
#else
Brought back Outliner operations! Since clicking on outliner items activates/selects, and not all outliner elements allow selection (like scene, mesh, material, etc) there's another selection method needed. It works by leftclicking (click-drag works too) outside of the outliner icons or texts. This allows rapid selecting, without any change in the other windows. Then press Wkey or RightMouse for an operations menu. Based on the selection you get a menu with options. Currently available; - Objects: Select/Deselect/Delete - Materials: Unlink - Textures: Unlink - Bones: Select/Deselect/Hide/Unhide Notes: - mixed selections give an error. - selection doesn't flush down into closed outliner items. - selection state is persistant (saved in files), and unique per Outliner window, so can be used as sortof temporal grouping. Hotkey SHIFT+A: select/deselect all open outliner items The system can be easily expanded with a lot of interesting options, of course.
2005-10-03 19:50:05 +00:00
outliner_operation_menu(sa);
Huge commit: VERSE - All code is in #ifdef ... #endif - Only make build system is supported and you have to add: export WITH_VERSE=true to user-def.mk file - Blender can share only mesh objects and bitmaps now - More informations can be found at wiki: http://mediawiki.blender.org/index.php/BlenderDev/VerseIntegrationToBlender http://mediawiki.blender.org/index.php/BlenderDev/VerseIntegrationToBlenderUserDoc I hope, that I didn't forget at anything
2006-08-20 15:22:56 +00:00
#endif
- Added Outliner selection As a means to indicate items in the Outliner to do operations on, you can select with RMB items. Works like FileSelect here. Since selection in Outliner is only on outliner level, no further UI updates happen. That is reserved for LMB actions. Implemented right now are only few operations... they can be called up with the WKEY (the famous spare key :) - if objects selected, a menu appears with choices - if materials or textures selected, a meny appears to unlink them If you make mixed or confusing selections you get a warning message. TODO: add selection color in theme, and of course more operations.
2004-10-10 11:33:19 +00:00
break;
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
case AKEY:
Brought back Outliner operations! Since clicking on outliner items activates/selects, and not all outliner elements allow selection (like scene, mesh, material, etc) there's another selection method needed. It works by leftclicking (click-drag works too) outside of the outliner icons or texts. This allows rapid selecting, without any change in the other windows. Then press Wkey or RightMouse for an operations menu. Based on the selection you get a menu with options. Currently available; - Objects: Select/Deselect/Delete - Materials: Unlink - Textures: Unlink - Bones: Select/Deselect/Hide/Unhide Notes: - mixed selections give an error. - selection doesn't flush down into closed outliner items. - selection state is persistant (saved in files), and unique per Outliner window, so can be used as sortof temporal grouping. Hotkey SHIFT+A: select/deselect all open outliner items The system can be easily expanded with a lot of interesting options, of course.
2005-10-03 19:50:05 +00:00
if(G.qual==LR_SHIFTKEY)
outliner_toggle_selected(sa);
else
outliner_toggle_visible(sa);
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
break;
- Added Outliner selection As a means to indicate items in the Outliner to do operations on, you can select with RMB items. Works like FileSelect here. Since selection in Outliner is only on outliner level, no further UI updates happen. That is reserved for LMB actions. Implemented right now are only few operations... they can be called up with the WKEY (the famous spare key :) - if objects selected, a menu appears with choices - if materials or textures selected, a meny appears to unlink them If you make mixed or confusing selections you get a warning message. TODO: add selection color in theme, and of course more operations.
2004-10-10 11:33:19 +00:00
case WKEY:
Brought back Outliner operations! Since clicking on outliner items activates/selects, and not all outliner elements allow selection (like scene, mesh, material, etc) there's another selection method needed. It works by leftclicking (click-drag works too) outside of the outliner icons or texts. This allows rapid selecting, without any change in the other windows. Then press Wkey or RightMouse for an operations menu. Based on the selection you get a menu with options. Currently available; - Objects: Select/Deselect/Delete - Materials: Unlink - Textures: Unlink - Bones: Select/Deselect/Hide/Unhide Notes: - mixed selections give an error. - selection doesn't flush down into closed outliner items. - selection state is persistant (saved in files), and unique per Outliner window, so can be used as sortof temporal grouping. Hotkey SHIFT+A: select/deselect all open outliner items The system can be easily expanded with a lot of interesting options, of course.
2005-10-03 19:50:05 +00:00
outliner_operation_menu(sa);
- Added Outliner selection As a means to indicate items in the Outliner to do operations on, you can select with RMB items. Works like FileSelect here. Since selection in Outliner is only on outliner level, no further UI updates happen. That is reserved for LMB actions. Implemented right now are only few operations... they can be called up with the WKEY (the famous spare key :) - if objects selected, a menu appears with choices - if materials or textures selected, a meny appears to unlink them If you make mixed or confusing selections you get a warning message. TODO: add selection color in theme, and of course more operations.
2004-10-10 11:33:19 +00:00
break;
More outliner features; - Made visualization of object hierarchy more clear with lines; this solves the sometimes confusing mix of 'children objects' and 'linked data'. - Enter editmode on click, also shows editing context buttons - SHIFT+click on a item closes/opens all below that item - Added constraints and Hooks (watch fun icon!) Note; global undo doesnt restore former view for outliner... it does not save the GUI, remember? :)
2004-10-07 21:45:04 +00:00
case HOMEKEY:
outliner_show_hierarchy(sa);
break;
Outliner features: - Rename! CTRL+leftmouse click on name, makes it a text button. Works for all items as currently being displayed. Most work was doing the Bones, which is a nightmare :) But it uses same code as buttons in Armature-Editmode now, without even needing EditMode :) When renaming a bone, the Outliner makes the Object active though. - PageUp / PageDown keys Do what you expect.
2004-10-11 11:54:14 +00:00
case PAGEUPKEY:
outliner_page_up_down(sa, 1);
break;
case PAGEDOWNKEY:
outliner_page_up_down(sa, -1);
break;
More outliner features; - Made visualization of object hierarchy more clear with lines; this solves the sometimes confusing mix of 'children objects' and 'linked data'. - Enter editmode on click, also shows editing context buttons - SHIFT+click on a item closes/opens all below that item - Added constraints and Hooks (watch fun icon!) Note; global undo doesnt restore former view for outliner... it does not save the GUI, remember? :)
2004-10-07 21:45:04 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
case RETKEY:
case PADENTER:
outliner_mouse_event(sa, event);
break;
case PERIODKEY:
case PADPERIOD:
outliner_show_active(sa);
break;
More outliner stuff; - added Images in overview - added Scripts in overview, if clicked it makes it active in open Text Window - Padplus/Padminus keys now open one level deeper or less - fix: Akey didn't really open all... - fix: click on item of non-active scene, activates new scene
2004-10-08 16:03:43 +00:00
case PADPLUSKEY:
outliner_one_level(sa, 1);
break;
case PADMINUS:
outliner_one_level(sa, -1);
break;
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
}
}
Made the outliner use leftmouse (as it is right now for default rightmouse select) for activating, expanding the tree, etc regardless of the mouse button selection user pref.
2004-10-07 03:04:20 +00:00
else {
/* swap mouse buttons based on user preference */
if (U.flag & USER_LMOUSESELECT) {
Bug fix #1893 Option to switch left/right mouse didn't work for floating panels. It then still selected stuff behind the button. Was due to using wrong variable for events.
2004-11-26 20:20:42 +00:00
if (event==LEFTMOUSE) event = RIGHTMOUSE;
else if (event==RIGHTMOUSE) event = LEFTMOUSE;
Made the outliner use leftmouse (as it is right now for default rightmouse select) for activating, expanding the tree, etc regardless of the mouse button selection user pref.
2004-10-07 03:04:20 +00:00
}
Bug fix #1893 Option to switch left/right mouse didn't work for floating panels. It then still selected stuff behind the button. Was due to using wrong variable for events.
2004-11-26 20:20:42 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
switch(event) {
case LEFTMOUSE:
gesture();
break;
case MIDDLEMOUSE:
case WHEELUPMOUSE:
case WHEELDOWNMOUSE:
view2dmove(event); /* in drawipo.c */
break;
case RIGHTMOUSE:
mouse_select_oops();
break;
case PADPLUSKEY:
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
dx= 0.1154*(v2d->cur.xmax-v2d->cur.xmin);
dy= 0.1154*(v2d->cur.ymax-v2d->cur.ymin);
v2d->cur.xmin+= dx;
v2d->cur.xmax-= dx;
v2d->cur.ymin+= dy;
v2d->cur.ymax-= dy;
test_view2d(G.v2d, curarea->winx, curarea->winy);
Hotkey fixes for space.c renaming mirrormesh to mirrormenu and added to the hotkey M in editmode (Layer move no longer works in edit mode)
2003-10-27 23:55:38 +00:00
scrarea_queue_winredraw(curarea);
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
break;
case PADMINUS:
dx= 0.15*(v2d->cur.xmax-v2d->cur.xmin);
dy= 0.15*(v2d->cur.ymax-v2d->cur.ymin);
v2d->cur.xmin-= dx;
v2d->cur.xmax+= dx;
v2d->cur.ymin-= dy;
v2d->cur.ymax+= dy;
test_view2d(G.v2d, curarea->winx, curarea->winy);
scrarea_queue_winredraw(curarea);
break;
case HOMEKEY:
if((G.qual==0))
do_oops_buttons(B_OOPSHOME);
break;
Oops, left the script menu in there. problems.
2005-12-16 13:50:45 +00:00
case PADPERIOD:
if((G.qual==0))
do_oops_buttons(B_OOPSVIEWSEL);
break;
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
case AKEY:
if((G.qual==0)) {
swap_select_all_oops();
scrarea_queue_winredraw(curarea);
* Added OOPS Schematic menus
2004-01-07 12:26:40 +00:00
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
break;
case BKEY:
if((G.qual==0))
borderselect_oops();
break;
case GKEY:
if((G.qual==0))
Removal of old transform() <sob> part one. - added in new transform the (not so useful but yah) old feature that does scrollwheel zoom during transform - had to change transform call arguments for uv-window/sequence/oops to match new transform for mouse callback TODO (for martin?) - pulldown menu support to call with local axes compliant as for pressing it with hotkey - mirrormenu() still uses old transform stuff...
2005-04-30 21:19:19 +00:00
transform_oops('g', 0);
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
break;
case LKEY:
if((G.qual==LR_SHIFTKEY))
select_backlinked_oops();
else if((G.qual==0))
select_linked_oops();
break;
case SKEY:
if((G.qual==LR_ALTKEY)) {
if (okee("Shrink blocks")) {
shrink_oops();
}
} else if((G.qual==LR_SHIFTKEY)) {
if (okee("Shuffle blocks")) {
shuffle_oops();
}
} else if((G.qual==0)) {
Removal of old transform() <sob> part one. - added in new transform the (not so useful but yah) old feature that does scrollwheel zoom during transform - had to change transform call arguments for uv-window/sequence/oops to match new transform for mouse callback TODO (for martin?) - pulldown menu support to call with local axes compliant as for pressing it with hotkey - mirrormenu() still uses old transform stuff...
2005-04-30 21:19:19 +00:00
transform_oops('s', 0);
* Added OOPS Schematic menus
2004-01-07 12:26:40 +00:00
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
break;
case PKEY:
if((G.qual==LR_CTRLKEY)) {
make_parent();
} else if((G.qual==LR_ALTKEY)) {
clear_parent();
}
break;
Cam's patch to enable parenting in the OOPS menu. Kent
2004-06-03 14:26:44 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
case ONEKEY:
do_layer_buttons(0); break;
case TWOKEY:
do_layer_buttons(1); break;
case THREEKEY:
do_layer_buttons(2); break;
case FOURKEY:
do_layer_buttons(3); break;
case FIVEKEY:
do_layer_buttons(4); break;
case SIXKEY:
do_layer_buttons(5); break;
case SEVENKEY:
do_layer_buttons(6); break;
case EIGHTKEY:
do_layer_buttons(7); break;
case NINEKEY:
do_layer_buttons(8); break;
case ZEROKEY:
do_layer_buttons(9); break;
case MINUSKEY:
do_layer_buttons(10); break;
case EQUALKEY:
do_layer_buttons(11); break;
case ACCENTGRAVEKEY:
do_layer_buttons(-1); break;
}
Initial revision
2002-10-12 11:37:38 +00:00
}
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
void init_v2d_oops(ScrArea *sa, SpaceOops *soops)
Initial revision
2002-10-12 11:37:38 +00:00
{
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
View2D *v2d= &soops->v2d;
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
if(soops->type==SO_OUTLINER) {
/* outliner space is window size */
Bug found by Bassam; in certain occasions reading a file calls setscreen() without the (ugly) global curarea being set. Fixed the crash in his sample by nicely passing on 'current area' as argument.
2005-01-31 18:37:54 +00:00
calc_scrollrcts(sa, v2d, sa->winx, sa->winy);
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
v2d->tot.xmax= 0.0;
v2d->tot.ymax= 0.0;
v2d->tot.xmin= -(v2d->mask.xmax-v2d->mask.xmin);
v2d->tot.ymin= -(v2d->mask.ymax-v2d->mask.ymin);
v2d->cur= v2d->tot;
v2d->min[0]= v2d->tot.xmin;
v2d->min[1]= v2d->tot.ymin;
v2d->max[0]= v2d->tot.xmax;
v2d->max[1]= v2d->tot.ymax;
v2d->minzoom= 1.0;
v2d->maxzoom= 1.0;
v2d->scroll= L_SCROLL;
v2d->keepaspect= 1;
v2d->keepzoom= 1;
v2d->keeptot= 1;
}
else {
v2d->tot.xmin= -28.0;
v2d->tot.xmax= 28.0;
v2d->tot.ymin= -28.0;
v2d->tot.ymax= 28.0;
v2d->cur= v2d->tot;
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
v2d->min[0]= 10.0;
v2d->min[1]= 4.0;
Initial revision
2002-10-12 11:37:38 +00:00
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
v2d->max[0]= 320.0;
v2d->max[1]= 320.0;
v2d->minzoom= 0.01f;
v2d->maxzoom= 2.0;
/* v2d->scroll= L_SCROLL+B_SCROLL; */
v2d->scroll= 0;
v2d->keepaspect= 1;
v2d->keepzoom= 0;
v2d->keeptot= 0;
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Bug as reported on irc often: in default .B.blend a first opening of Outliner happened in Oops block view. I found this was caused by commit of of a new .B.blend in may 2005 (after 2.36, before 2.37). That file had already opened Oops views stored, which have to remain that way of course. A full cleanup of .B.blend i rather not do now, so I've added a patch in code that on read of the built-in .B.blend it sets all existing Oops windows to Outliner. And while working on it anyway, on first opening of a new Outliner, the current Scene level is opened, but showing objects closed.
2006-07-04 12:10:37 +00:00
static void init_oopsspace(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceOops *soops;
soops= MEM_callocN(sizeof(SpaceOops), "initoopsspace");
BLI_addhead(&sa->spacedata, soops);
soops->visiflag= OOPS_OB+OOPS_MA+OOPS_ME+OOPS_TE+OOPS_CU+OOPS_IP;
Bug as reported on irc often: in default .B.blend a first opening of Outliner happened in Oops block view. I found this was caused by commit of of a new .B.blend in may 2005 (after 2.36, before 2.37). That file had already opened Oops views stored, which have to remain that way of course. A full cleanup of .B.blend i rather not do now, so I've added a patch in code that on read of the built-in .B.blend it sets all existing Oops windows to Outliner. And while working on it anyway, on first opening of a new Outliner, the current Scene level is opened, but showing objects closed.
2006-07-04 12:10:37 +00:00
/* new oops is default an outliner */
soops->type= SO_OUTLINER;
Made outliner default over oops - looks like it was intended to be but it didnt work, need to change the .B.blend file so the default isnt OOPS.
2006-06-23 11:31:04 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
soops->spacetype= SPACE_OOPS;
Preparations to have Panels in all window types. Also implemented it for the UV Image window (as Nkey replacement). Blendix can take this further now. Other little improvement: vertices in UV window now draw unselected first, and then selected over it. Less confusing! Next spaces: Action and Nla.
2004-04-19 22:05:37 +00:00
soops->blockscale= 0.7;
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
init_v2d_oops(sa, soops);
}
/* ******************** SPACE: NLA ********************** */
static void init_nlaspace(ScrArea *sa)
{
SpaceNla *snla;
snla= MEM_callocN(sizeof(SpaceNla), "initnlaspace");
BLI_addhead(&sa->spacedata, snla);
snla->spacetype= SPACE_NLA;
snla->blockscale= 0.7;
snla->v2d.tot.xmin= 1.0;
snla->v2d.tot.ymin= 0.0;
snla->v2d.tot.xmax= 1000.0;
snla->v2d.tot.ymax= 1000.0;
snla->v2d.cur.xmin= -5.0;
snla->v2d.cur.ymin= 0.0;
snla->v2d.cur.xmax= 65.0;
snla->v2d.cur.ymax= 1000.0;
snla->v2d.min[0]= 0.0;
snla->v2d.min[1]= 0.0;
snla->v2d.max[0]= 1000.0;
snla->v2d.max[1]= 1000.0;
snla->v2d.minzoom= 0.1F;
snla->v2d.maxzoom= 50;
snla->v2d.scroll= R_SCROLL+B_SCROLL;
snla->v2d.keepaspect= 0;
snla->v2d.keepzoom= V2D_LOCKZOOM_Y;
snla->v2d.keeptot= 0;
snla->lock = 0;
Initial revision
2002-10-12 11:37:38 +00:00
}
/* ******************** SPACE: Text ********************** */
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
extern void drawtextspace(ScrArea *sa, void *spacedata);
extern void winqreadtextspace(struct ScrArea *sa, void *spacedata, struct BWinEvent *evt);
Initial revision
2002-10-12 11:37:38 +00:00
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
static void init_textspace(ScrArea *sa)
{
SpaceText *st;
st= MEM_callocN(sizeof(SpaceText), "inittextspace");
BLI_addhead(&sa->spacedata, st);
st->spacetype= SPACE_TEXT;
st->blockscale= 0.7;
st->text= NULL;
st->flags= 0;
st->font_id= 5;
st->lheight= 12;
st->showlinenrs= 0;
st->tabnumber = 4;
st->currtab_set = 0;
st->top= 0;
}
BPython - first step for better integration of Python in Blender: - add a new space: Space Script - add a new dna struct: Script - add these two properly everywhere they are meant to It's not a tiny commit, but most of it is ground work for what is still to be done. Right now the benefits should be: freeing the Text Editor to be used in a window even while a script w/ gui in "on" and letting more than one currently running script w/ gui be accessible from each window Some files are added, so some build systems (not autotools) will need updates
2003-12-14 01:18:09 +00:00
/* ******************** SPACE: Script ********************** */
extern void drawscriptspace(ScrArea *sa, void *spacedata);
extern void winqreadscriptspace(struct ScrArea *sa, void *spacedata, struct BWinEvent *evt);
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
static void init_scriptspace(ScrArea *sa)
{
SpaceScript *sc;
sc = MEM_callocN(sizeof(SpaceScript), "initscriptspace");
BLI_addhead(&sa->spacedata, sc);
sc->spacetype = SPACE_SCRIPT;
sc->blockscale= 0.7;
sc->script = NULL;
sc->flags = 0;
}
/* ******************** SPACE: Time ********************** */
extern void drawtimespace(ScrArea *sa, void *spacedata);
extern void winqreadtimespace(struct ScrArea *sa, void *spacedata, struct BWinEvent *evt);
static void init_timespace(ScrArea *sa)
{
SpaceTime *stime;
stime= MEM_callocN(sizeof(SpaceTime), "init timespace");
BLI_addhead(&sa->spacedata, stime);
stime->spacetype= SPACE_TIME;
stime->blockscale= 0.7;
Animated UI for TimeLine "Play" Using the Play button in timeline, now uses an event-driven system to update the animation system and signal windows to redraw. Meaning the full UI remains responsive! Check the new Pulldown "Playback" to set which windows you like to see updated. Same settings is used for LMB 'dragging' frames in Timeline. Implementation notes; - the Icon for 'Pause' (or stop) has to be made yet, I commit this from my laptop... all was coded during a 2 x 5 hour train ride to germany - the anim playback system (ALT+A too) now uses correct "frames per second" as maximum speed. Buttons can be found in 3 places in the UI, also added it as pulldown item - The system works with 'screen handlers', which has been coded with using Python (networked) events or verse in mind too. A doc on that will follow. - the buttons code has been made 'resistant' to animated UIs too, preventing flashing of hilites. - All subloops (like transform) stop playback, with exception of MMB view manipulations. As extra; found tweak to make Textured AA fonts draw without distortion. Looks perfect here on laptop now (like Pixmap fonts) and is 20x faster.
2005-05-11 20:01:42 +00:00
stime->redraws= TIME_ALL_3D_WIN|TIME_ALL_ANIM_WIN;
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
stime->v2d.tot.xmin= -4.0;
stime->v2d.tot.ymin= 0.0;
Animated UI for TimeLine "Play" Using the Play button in timeline, now uses an event-driven system to update the animation system and signal windows to redraw. Meaning the full UI remains responsive! Check the new Pulldown "Playback" to set which windows you like to see updated. Same settings is used for LMB 'dragging' frames in Timeline. Implementation notes; - the Icon for 'Pause' (or stop) has to be made yet, I commit this from my laptop... all was coded during a 2 x 5 hour train ride to germany - the anim playback system (ALT+A too) now uses correct "frames per second" as maximum speed. Buttons can be found in 3 places in the UI, also added it as pulldown item - The system works with 'screen handlers', which has been coded with using Python (networked) events or verse in mind too. A doc on that will follow. - the buttons code has been made 'resistant' to animated UIs too, preventing flashing of hilites. - All subloops (like transform) stop playback, with exception of MMB view manipulations. As extra; found tweak to make Textured AA fonts draw without distortion. Looks perfect here on laptop now (like Pixmap fonts) and is 20x faster.
2005-05-11 20:01:42 +00:00
stime->v2d.tot.xmax= (float)EFRA + 4.0;
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
stime->v2d.tot.ymax= (float)sa->winy;
Animated UI for TimeLine "Play" Using the Play button in timeline, now uses an event-driven system to update the animation system and signal windows to redraw. Meaning the full UI remains responsive! Check the new Pulldown "Playback" to set which windows you like to see updated. Same settings is used for LMB 'dragging' frames in Timeline. Implementation notes; - the Icon for 'Pause' (or stop) has to be made yet, I commit this from my laptop... all was coded during a 2 x 5 hour train ride to germany - the anim playback system (ALT+A too) now uses correct "frames per second" as maximum speed. Buttons can be found in 3 places in the UI, also added it as pulldown item - The system works with 'screen handlers', which has been coded with using Python (networked) events or verse in mind too. A doc on that will follow. - the buttons code has been made 'resistant' to animated UIs too, preventing flashing of hilites. - All subloops (like transform) stop playback, with exception of MMB view manipulations. As extra; found tweak to make Textured AA fonts draw without distortion. Looks perfect here on laptop now (like Pixmap fonts) and is 20x faster.
2005-05-11 20:01:42 +00:00
stime->v2d.cur= stime->v2d.tot;
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
stime->v2d.min[0]= 1.0;
stime->v2d.min[1]= (float)sa->winy;
stime->v2d.max[0]= 32000.0;
stime->v2d.max[1]= (float)sa->winy;
stime->v2d.minzoom= 0.1f;
stime->v2d.maxzoom= 10.0;
stime->v2d.scroll= 0;
stime->v2d.keepaspect= 0;
stime->v2d.keepzoom= 0;
stime->v2d.keeptot= 0;
* Timeline should display frames by default, not seconds
2005-05-12 12:33:43 +00:00
stime->flag |= TIME_DRAWFRAMES;
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
}
Orange: - Sunday merger with bf-blender - Foundations for new Node editor in Blender, generic framework that can be used for Material/Texture, Compositing, Logic or maybe even Sequencer. Note: this doesn't do anything yet, nor save! Is just to get this nice in CVS now. :)
2005-12-18 13:46:01 +00:00
/* ******************** SPACE: Time ********************** */
extern void drawnodespace(ScrArea *sa, void *spacedata);
extern void winqreadnodespace(struct ScrArea *sa, void *spacedata, struct BWinEvent *evt);
static void init_nodespace(ScrArea *sa)
{
SpaceNode *snode;
snode= MEM_callocN(sizeof(SpaceNode), "init nodespace");
BLI_addhead(&sa->spacedata, snode);
snode->spacetype= SPACE_NODE;
snode->blockscale= 0.7;
snode->v2d.tot.xmin= -10.0;
snode->v2d.tot.ymin= -10.0;
snode->v2d.tot.xmax= (float)sa->winx + 10.0f;
snode->v2d.tot.ymax= (float)sa->winy + 10.0f;
snode->v2d.cur.xmin= 0.0;
snode->v2d.cur.ymin= 0.0;
snode->v2d.cur.xmax= (float)sa->winx;
snode->v2d.cur.ymax= (float)sa->winy;
snode->v2d.min[0]= 1.0;
snode->v2d.min[1]= 1.0;
snode->v2d.max[0]= 32000.0f;
snode->v2d.max[1]= 32000.0f;
snode->v2d.minzoom= 0.5f;
snode->v2d.maxzoom= 1.21f;
snode->v2d.scroll= 0;
snode->v2d.keepaspect= 1;
snode->v2d.keepzoom= 1;
snode->v2d.keeptot= 0;
}
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
/* ******************** SPACE: GENERAL ********************** */
Initial revision
2002-10-12 11:37:38 +00:00
void newspace(ScrArea *sa, int type)
{
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
int xtra= type & 256; /* hack to enforce outliner with hotkey from toets.c */
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
type &= ~256;
Initial revision
2002-10-12 11:37:38 +00:00
if(type>=0) {
if(sa->spacetype != type) {
SpaceLink *sl;
sa->spacetype= type;
sa->headbutofs= 0;
uiFreeBlocks(&sa->uiblocks);
wich_cursor(sa);
if (sa->headwin) addqueue(sa->headwin, CHANGED, 1);
scrarea_queue_headredraw(sa);
addqueue(sa->win, CHANGED, 1);
scrarea_queue_winredraw(sa);
areawinset(sa->win);
bwin_clear_viewmat(sa->win);
for (sl= sa->spacedata.first; sl; sl= sl->next)
if(sl->spacetype==type)
break;
if (sl) {
BLI_remlink(&sa->spacedata, sl);
BLI_addhead(&sa->spacedata, sl);
} else {
if(type==SPACE_VIEW3D)
initview3d(sa);
else if(type==SPACE_IPO)
initipo(sa);
else if(type==SPACE_INFO)
init_infospace(sa);
else if(type==SPACE_BUTS)
init_butspace(sa);
else if(type==SPACE_FILE)
init_filespace(sa);
else if(type==SPACE_SEQ)
init_seqspace(sa);
else if(type==SPACE_IMAGE)
init_imagespace(sa);
else if(type==SPACE_IMASEL)
init_imaselspace(sa);
else if(type==SPACE_OOPS)
Bug as reported on irc often: in default .B.blend a first opening of Outliner happened in Oops block view. I found this was caused by commit of of a new .B.blend in may 2005 (after 2.36, before 2.37). That file had already opened Oops views stored, which have to remain that way of course. A full cleanup of .B.blend i rather not do now, so I've added a patch in code that on read of the built-in .B.blend it sets all existing Oops windows to Outliner. And while working on it anyway, on first opening of a new Outliner, the current Scene level is opened, but showing objects closed.
2006-07-04 12:10:37 +00:00
init_oopsspace(sa);
Initial revision
2002-10-12 11:37:38 +00:00
else if(type==SPACE_ACTION)
init_actionspace(sa);
else if(type==SPACE_TEXT)
init_textspace(sa);
BPython - first step for better integration of Python in Blender: - add a new space: Space Script - add a new dna struct: Script - add these two properly everywhere they are meant to It's not a tiny commit, but most of it is ground work for what is still to be done. Right now the benefits should be: freeing the Text Editor to be used in a window even while a script w/ gui in "on" and letting more than one currently running script w/ gui be accessible from each window Some files are added, so some build systems (not autotools) will need updates
2003-12-14 01:18:09 +00:00
else if(type==SPACE_SCRIPT)
init_scriptspace(sa);
Initial revision
2002-10-12 11:37:38 +00:00
else if(type==SPACE_SOUND)
init_soundspace(sa);
else if(type==SPACE_NLA)
init_nlaspace(sa);
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
else if(type==SPACE_TIME)
init_timespace(sa);
Orange: - Sunday merger with bf-blender - Foundations for new Node editor in Blender, generic framework that can be used for Material/Texture, Compositing, Logic or maybe even Sequencer. Note: this doesn't do anything yet, nor save! Is just to get this nice in CVS now. :)
2005-12-18 13:46:01 +00:00
else if(type==SPACE_NODE)
init_nodespace(sa);
Initial revision
2002-10-12 11:37:38 +00:00
sl= sa->spacedata.first;
sl->area= sa;
}
}
}
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* exception: filespace */
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
if(sa->spacetype==SPACE_FILE) {
SpaceFile *sfile= sa->spacedata.first;
Initial revision
2002-10-12 11:37:38 +00:00
if(sfile->type==FILE_MAIN) {
freefilelist(sfile);
} else {
sfile->type= FILE_UNIX;
}
sfile->returnfunc= 0;
sfile->title[0]= 0;
if(sfile->filelist) test_flags_file(sfile);
}
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* exception: imasel space */
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
else if(sa->spacetype==SPACE_IMASEL) {
SpaceImaSel *simasel= sa->spacedata.first;
Initial revision
2002-10-12 11:37:38 +00:00
simasel->returnfunc= 0;
simasel->title[0]= 0;
}
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
else if(sa->spacetype==SPACE_OOPS) {
SpaceOops *so= sa->spacedata.first;
if(xtra && so->type!=SO_OUTLINER) {
so->type= SO_OUTLINER;
init_v2d_oops(sa, so);
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
void freespacelist(ScrArea *sa)
Initial revision
2002-10-12 11:37:38 +00:00
{
SpaceLink *sl;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
for (sl= sa->spacedata.first; sl; sl= sl->next) {
Initial revision
2002-10-12 11:37:38 +00:00
if(sl->spacetype==SPACE_FILE) {
SpaceFile *sfile= (SpaceFile*) sl;
if(sfile->libfiledata)
BLO_blendhandle_close(sfile->libfiledata);
Patch provided by Andrea Weikert (elubie): With a few tests I have discovered that when quitting Blender the filelist in SpaceFile doesn't get free'd. storage.c: I have replaced strdup for the relname member in BLI_builddir with BLI_strdup. and malloc with MEM_mallocN for the string member in BLI_addstrings(). filesel.c: Of course also had to replace free with MEM_freeN in freefilelist(). In freespacelist (space.c) I added call to freefilelist for the SPACE_FILE space type.
2005-04-17 15:50:52 +00:00
if(sfile->filelist)
freefilelist(sfile);
Initial revision
2002-10-12 11:37:38 +00:00
}
else if(sl->spacetype==SPACE_BUTS) {
SpaceButs *buts= (SpaceButs*) sl;
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
if(buts->ri) {
if (buts->ri->rect) MEM_freeN(buts->ri->rect);
MEM_freeN(buts->ri);
}
New feature; User definable Clipping Planes. Press ALT+B in 3d window, draw a rect, and it becomes a clipping volume of 4 planes. You then can rotate the view anyway you like. Works for each 3d window individually. Disable it with another ALT+B press. Commit is huge because it had to change all selection code as well. The user-clipping planes are in 'eye space', the other clipping happens in projected 'viewport space'. Nice to notice is that the 'x=3200' convention (to denote a coordinate is clipped) now is a define. Define value is still a number though... but we now can get up to screens of 12000 pixels without issues! Known issue; here it refuses to draw the 'object centers' or Lamp icons within the clipping region. Can't find any reason for it... however, we might move to non-pixmaps for it anyway. Testing might reveil numerous issues, will be standby for it. Curious? Check this http://www.blender.org/bf/rt4.jpg
2005-08-20 19:18:35 +00:00
if(G.buts==buts) G.buts= NULL;
Initial revision
2002-10-12 11:37:38 +00:00
}
else if(sl->spacetype==SPACE_IPO) {
SpaceIpo *si= (SpaceIpo*) sl;
if(si->editipo) MEM_freeN(si->editipo);
free_ipokey(&si->ipokey);
New feature; User definable Clipping Planes. Press ALT+B in 3d window, draw a rect, and it becomes a clipping volume of 4 planes. You then can rotate the view anyway you like. Works for each 3d window individually. Disable it with another ALT+B press. Commit is huge because it had to change all selection code as well. The user-clipping planes are in 'eye space', the other clipping happens in projected 'viewport space'. Nice to notice is that the 'x=3200' convention (to denote a coordinate is clipped) now is a define. Define value is still a number though... but we now can get up to screens of 12000 pixels without issues! Known issue; here it refuses to draw the 'object centers' or Lamp icons within the clipping region. Can't find any reason for it... however, we might move to non-pixmaps for it anyway. Testing might reveil numerous issues, will be standby for it. Curious? Check this http://www.blender.org/bf/rt4.jpg
2005-08-20 19:18:35 +00:00
if(G.sipo==si) G.sipo= NULL;
Initial revision
2002-10-12 11:37:38 +00:00
}
else if(sl->spacetype==SPACE_VIEW3D) {
View3D *vd= (View3D*) sl;
if(vd->bgpic) {
if(vd->bgpic->rect) MEM_freeN(vd->bgpic->rect);
if(vd->bgpic->ima) vd->bgpic->ima->id.us--;
MEM_freeN(vd->bgpic);
}
if(vd->localvd) MEM_freeN(vd->localvd);
New feature; User definable Clipping Planes. Press ALT+B in 3d window, draw a rect, and it becomes a clipping volume of 4 planes. You then can rotate the view anyway you like. Works for each 3d window individually. Disable it with another ALT+B press. Commit is huge because it had to change all selection code as well. The user-clipping planes are in 'eye space', the other clipping happens in projected 'viewport space'. Nice to notice is that the 'x=3200' convention (to denote a coordinate is clipped) now is a define. Define value is still a number though... but we now can get up to screens of 12000 pixels without issues! Known issue; here it refuses to draw the 'object centers' or Lamp icons within the clipping region. Can't find any reason for it... however, we might move to non-pixmaps for it anyway. Testing might reveil numerous issues, will be standby for it. Curious? Check this http://www.blender.org/bf/rt4.jpg
2005-08-20 19:18:35 +00:00
if(vd->clipbb) MEM_freeN(vd->clipbb);
if(G.vd==vd) G.vd= NULL;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(vd->ri) {
New: - ZTransp render now also delivers Z values and Speed vectors in passes Note that speed vectors accumulate within a pixel to store the minimum, so rendering ztransp on top of a non-moving plane won't give speed... Best results you get is by rendering it in a separate layer. The Z value stored is the closest visible transparent face in the pixel. Fixes: - Render to 'spare page' has been enabled again. Because of the strict separation of Render and UI, but especially because a 'render result' now can consist of unlimited images, I've not made this a Render feature. Instead, the render-window itself stores the 'spare' image... I also had to change the convention for it a bit. Now, instead of having two "render buffers" (which was a render feature), the RenderWindow will store each previous frame on a re-render. This storing will only start after you've pressed 'Jkey' once, but then always will happen for as long the rendered image is same size as previously. For clarity, I've also renamed the window title, to 'previous frame'. - RenderWindow shows alpha again on Akey - Display of the Zvalues in ImageWindow has been tweaked. White now denotes closest, and the color range goes from camera clip-sta to clip-end. - Bugfix: on splitting/merging/duplicating windows, the 3D Previewrender was not always freed correctly, potentially causing crashes or memory leaks.
2006-02-08 16:51:09 +00:00
BIF_view3d_previewrender_free(vd);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
}
else if(sl->spacetype==SPACE_OOPS) {
free_oopspace((SpaceOops *)sl);
}
else if(sl->spacetype==SPACE_IMASEL) {
free_imasel((SpaceImaSel *)sl);
}
else if(sl->spacetype==SPACE_ACTION) {
free_actionspace((SpaceAction*)sl);
}
else if(sl->spacetype==SPACE_NLA){
/* free_nlaspace((SpaceNla*)sl); */
}
else if(sl->spacetype==SPACE_TEXT) {
free_textspace((SpaceText *)sl);
}
BPython - first step for better integration of Python in Blender: - add a new space: Space Script - add a new dna struct: Script - add these two properly everywhere they are meant to It's not a tiny commit, but most of it is ground work for what is still to be done. Right now the benefits should be: freeing the Text Editor to be used in a window even while a script w/ gui in "on" and letting more than one currently running script w/ gui be accessible from each window Some files are added, so some build systems (not autotools) will need updates
2003-12-14 01:18:09 +00:00
else if(sl->spacetype==SPACE_SCRIPT) {
free_scriptspace((SpaceScript *)sl);
}
Initial revision
2002-10-12 11:37:38 +00:00
else if(sl->spacetype==SPACE_SOUND) {
free_soundspace((SpaceSound *)sl);
}
Orange: and now for the real exr fun: float buffer support in Image window! Image as loaded in Blender (from openexr.com): http://www.blender.org/bf/exrcurve1.jpg Image with different white point: http://www.blender.org/bf/exrcurve2.jpg Image with white and black point and a curve: http://www.blender.org/bf/exrcurve3.jpg Use SHIFT+click to set the black point, and CTRL+click for white point. The buttons in the panel work too, of course. The curves work after the black/white range was corrected, so you can stick to curves with a normal 0-1 range. There's also now a general color curve, marked with 'C' button. Note; this currently only maps the float colors to a visible 8 bits per channel rect. You can save it, but when the blender file loads the curve or mapping is not executed until you click in the curves... have to look at that still. Speed for this is also quite unoptimized... still WIP, but fun!
2006-01-09 23:52:51 +00:00
else if(sl->spacetype==SPACE_IMAGE) {
SpaceImage *sima= (SpaceImage *)sl;
if(sima->cumap)
curvemapping_free(sima->cumap);
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
if(sima->info_str)
MEM_freeN(sima->info_str);
Orange: and now for the real exr fun: float buffer support in Image window! Image as loaded in Blender (from openexr.com): http://www.blender.org/bf/exrcurve1.jpg Image with different white point: http://www.blender.org/bf/exrcurve2.jpg Image with white and black point and a curve: http://www.blender.org/bf/exrcurve3.jpg Use SHIFT+click to set the black point, and CTRL+click for white point. The buttons in the panel work too, of course. The curves work after the black/white range was corrected, so you can stick to curves with a normal 0-1 range. There's also now a general color curve, marked with 'C' button. Note; this currently only maps the float colors to a visible 8 bits per channel rect. You can save it, but when the blender file loads the curve or mapping is not executed until you click in the curves... have to look at that still. Speed for this is also quite unoptimized... still WIP, but fun!
2006-01-09 23:52:51 +00:00
}
Orange: - Sunday merger with bf-blender - Foundations for new Node editor in Blender, generic framework that can be used for Material/Texture, Compositing, Logic or maybe even Sequencer. Note: this doesn't do anything yet, nor save! Is just to get this nice in CVS now. :)
2005-12-18 13:46:01 +00:00
else if(sl->spacetype==SPACE_NODE) {
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
/* SpaceNode *snode= (SpaceNode *)sl; */
Orange: - Sunday merger with bf-blender - Foundations for new Node editor in Blender, generic framework that can be used for Material/Texture, Compositing, Logic or maybe even Sequencer. Note: this doesn't do anything yet, nor save! Is just to get this nice in CVS now. :)
2005-12-18 13:46:01 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
BLI_freelistN(&sa->spacedata);
Initial revision
2002-10-12 11:37:38 +00:00
}
void duplicatespacelist(ScrArea *newarea, ListBase *lb1, ListBase *lb2)
{
SpaceLink *sl;
duplicatelist(lb1, lb2);
New: - ZTransp render now also delivers Z values and Speed vectors in passes Note that speed vectors accumulate within a pixel to store the minimum, so rendering ztransp on top of a non-moving plane won't give speed... Best results you get is by rendering it in a separate layer. The Z value stored is the closest visible transparent face in the pixel. Fixes: - Render to 'spare page' has been enabled again. Because of the strict separation of Render and UI, but especially because a 'render result' now can consist of unlimited images, I've not made this a Render feature. Instead, the render-window itself stores the 'spare' image... I also had to change the convention for it a bit. Now, instead of having two "render buffers" (which was a render feature), the RenderWindow will store each previous frame on a re-render. This storing will only start after you've pressed 'Jkey' once, but then always will happen for as long the rendered image is same size as previously. For clarity, I've also renamed the window title, to 'previous frame'. - RenderWindow shows alpha again on Akey - Display of the Zvalues in ImageWindow has been tweaked. White now denotes closest, and the color range goes from camera clip-sta to clip-end. - Bugfix: on splitting/merging/duplicating windows, the 3D Previewrender was not always freed correctly, potentially causing crashes or memory leaks.
2006-02-08 16:51:09 +00:00
/* lb1 is copy from lb2, from lb2 we free stuff, rely on event system to properly re-alloc */
Initial revision
2002-10-12 11:37:38 +00:00
sl= lb2->first;
while(sl) {
if(sl->spacetype==SPACE_FILE) {
SpaceFile *sfile= (SpaceFile*) sl;
sfile->libfiledata= 0;
sfile->filelist= 0;
}
New: - ZTransp render now also delivers Z values and Speed vectors in passes Note that speed vectors accumulate within a pixel to store the minimum, so rendering ztransp on top of a non-moving plane won't give speed... Best results you get is by rendering it in a separate layer. The Z value stored is the closest visible transparent face in the pixel. Fixes: - Render to 'spare page' has been enabled again. Because of the strict separation of Render and UI, but especially because a 'render result' now can consist of unlimited images, I've not made this a Render feature. Instead, the render-window itself stores the 'spare' image... I also had to change the convention for it a bit. Now, instead of having two "render buffers" (which was a render feature), the RenderWindow will store each previous frame on a re-render. This storing will only start after you've pressed 'Jkey' once, but then always will happen for as long the rendered image is same size as previously. For clarity, I've also renamed the window title, to 'previous frame'. - RenderWindow shows alpha again on Akey - Display of the Zvalues in ImageWindow has been tweaked. White now denotes closest, and the color range goes from camera clip-sta to clip-end. - Bugfix: on splitting/merging/duplicating windows, the 3D Previewrender was not always freed correctly, potentially causing crashes or memory leaks.
2006-02-08 16:51:09 +00:00
else if(sl->spacetype==SPACE_VIEW3D) {
BIF_view3d_previewrender_free((View3D *)sl);
}
Initial revision
2002-10-12 11:37:38 +00:00
else if(sl->spacetype==SPACE_OOPS) {
SpaceOops *so= (SpaceOops *)sl;
Version 1.0 of the new Outliner The outliner is a hierarchical diagram displaying a list of data in Blender and its dependencies. The 'databrowse' doesn't really show it, and Oops is too chaotic still. And most of all, the former two don't offer much tools. After discussions on irc, Matt came with this design proposal; http://mke3.net/blender/interface/layout/outliner/ Which is closely followed for the implementation. The current version only shows all 'library data' in Blender (objects, meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA. I decided to make it inside the Oopw window, as an option. You can find the option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9 Here's a quick overview of the Outliner GUI: - Header pulldown has options what it can show (Visible = in current layers) - click on triangle arrow to open/close - press AKEY to open/close all - Leftmouse click on an item activates; and does based on type a couple of extra things: - activates a scene - selects/activates the Object - enters editmode (if clicked on Mesh, Curve, etc) - shows the appropriate Shading buttons (Lamp, Material, Texture) - sets the IpoWindow to the current IPO - activates the Ipo-channel in an Action - Selected and Active objects are drawn in its Theme selection color - SHIFT+click on Object does extend-select - Press DOTkey to get the current active data in center of view TODO; - rightmouse selection; for indicating operations like delete or duplicate - showing more data types - icon (re)design... - lotsof options as described in Matts paper still...
2004-10-06 18:55:00 +00:00
so->oops.first= so->oops.last= NULL;
so->tree.first= so->tree.last= NULL;
so->treestore= NULL;
Initial revision
2002-10-12 11:37:38 +00:00
}
else if(sl->spacetype==SPACE_IMASEL) {
check_imasel_copy((SpaceImaSel *) sl);
}
Orange: - Sunday merger with bf-blender - Foundations for new Node editor in Blender, generic framework that can be used for Material/Texture, Compositing, Logic or maybe even Sequencer. Note: this doesn't do anything yet, nor save! Is just to get this nice in CVS now. :)
2005-12-18 13:46:01 +00:00
else if(sl->spacetype==SPACE_NODE) {
SpaceNode *snode= (SpaceNode *)sl;
snode->nodetree= NULL;
}
Initial revision
2002-10-12 11:37:38 +00:00
sl= sl->next;
}
sl= lb1->first;
while(sl) {
sl->area= newarea;
if(sl->spacetype==SPACE_BUTS) {
SpaceButs *buts= (SpaceButs *)sl;
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
buts->ri= NULL;
Initial revision
2002-10-12 11:37:38 +00:00
}
else if(sl->spacetype==SPACE_IPO) {
SpaceIpo *si= (SpaceIpo *)sl;
New feature; User definable Clipping Planes. Press ALT+B in 3d window, draw a rect, and it becomes a clipping volume of 4 planes. You then can rotate the view anyway you like. Works for each 3d window individually. Disable it with another ALT+B press. Commit is huge because it had to change all selection code as well. The user-clipping planes are in 'eye space', the other clipping happens in projected 'viewport space'. Nice to notice is that the 'x=3200' convention (to denote a coordinate is clipped) now is a define. Define value is still a number though... but we now can get up to screens of 12000 pixels without issues! Known issue; here it refuses to draw the 'object centers' or Lamp icons within the clipping region. Can't find any reason for it... however, we might move to non-pixmaps for it anyway. Testing might reveil numerous issues, will be standby for it. Curious? Check this http://www.blender.org/bf/rt4.jpg
2005-08-20 19:18:35 +00:00
si->editipo= NULL;
si->ipokey.first= si->ipokey.last= NULL;
Initial revision
2002-10-12 11:37:38 +00:00
}
else if(sl->spacetype==SPACE_VIEW3D) {
View3D *vd= (View3D *)sl;
if(vd->bgpic) {
vd->bgpic= MEM_dupallocN(vd->bgpic);
New feature; User definable Clipping Planes. Press ALT+B in 3d window, draw a rect, and it becomes a clipping volume of 4 planes. You then can rotate the view anyway you like. Works for each 3d window individually. Disable it with another ALT+B press. Commit is huge because it had to change all selection code as well. The user-clipping planes are in 'eye space', the other clipping happens in projected 'viewport space'. Nice to notice is that the 'x=3200' convention (to denote a coordinate is clipped) now is a define. Define value is still a number though... but we now can get up to screens of 12000 pixels without issues! Known issue; here it refuses to draw the 'object centers' or Lamp icons within the clipping region. Can't find any reason for it... however, we might move to non-pixmaps for it anyway. Testing might reveil numerous issues, will be standby for it. Curious? Check this http://www.blender.org/bf/rt4.jpg
2005-08-20 19:18:35 +00:00
vd->bgpic->rect= NULL;
Initial revision
2002-10-12 11:37:38 +00:00
if(vd->bgpic->ima) vd->bgpic->ima->id.us++;
}
New feature; User definable Clipping Planes. Press ALT+B in 3d window, draw a rect, and it becomes a clipping volume of 4 planes. You then can rotate the view anyway you like. Works for each 3d window individually. Disable it with another ALT+B press. Commit is huge because it had to change all selection code as well. The user-clipping planes are in 'eye space', the other clipping happens in projected 'viewport space'. Nice to notice is that the 'x=3200' convention (to denote a coordinate is clipped) now is a define. Define value is still a number though... but we now can get up to screens of 12000 pixels without issues! Known issue; here it refuses to draw the 'object centers' or Lamp icons within the clipping region. Can't find any reason for it... however, we might move to non-pixmaps for it anyway. Testing might reveil numerous issues, will be standby for it. Curious? Check this http://www.blender.org/bf/rt4.jpg
2005-08-20 19:18:35 +00:00
vd->clipbb= MEM_dupallocN(vd->clipbb);
First bugfix in 3d previewrender; going full-window and back crashed. Thanks Campbell! :)
2006-01-23 22:59:22 +00:00
vd->ri= NULL;
Initial revision
2002-10-12 11:37:38 +00:00
}
Orange: and now for the real exr fun: float buffer support in Image window! Image as loaded in Blender (from openexr.com): http://www.blender.org/bf/exrcurve1.jpg Image with different white point: http://www.blender.org/bf/exrcurve2.jpg Image with white and black point and a curve: http://www.blender.org/bf/exrcurve3.jpg Use SHIFT+click to set the black point, and CTRL+click for white point. The buttons in the panel work too, of course. The curves work after the black/white range was corrected, so you can stick to curves with a normal 0-1 range. There's also now a general color curve, marked with 'C' button. Note; this currently only maps the float colors to a visible 8 bits per channel rect. You can save it, but when the blender file loads the curve or mapping is not executed until you click in the curves... have to look at that still. Speed for this is also quite unoptimized... still WIP, but fun!
2006-01-09 23:52:51 +00:00
else if(sl->spacetype==SPACE_IMAGE) {
SpaceImage *sima= (SpaceImage *)sl;
if(sima->cumap)
sima->cumap= curvemapping_copy(sima->cumap);
New feature! (Well, replacement for the exisiting cumbersome "DispView") Next to the "DispWindow" there are now two new choices: - Display render output to Image Editor - Display render output to Screen-sized Image Editor Both options won't open a 2nd window anymore, which makes work quite more smooth even, especially because 'focus' isn't lost. Further it fits in the 'single window UI' paradigm of Blender. Should have been done 10 years ago! Lastly it might bypass issues with X11... having 2 windows with opengl context is not always stable in Linux. This option uses an identical trick as for the Compositor viewer, using an Image block with a fixed name ("Render Result"). The flow, when invoking a Render, goes as follows: - first it checks if there's an Image Editor visible displaying the "Render Result", if so then it uses that area-window. (Use this option for dual-monitor setups for example, a render will always go to the same location then) - else it checks if there's an Image Editor open in general, it then assigns that window the "Render Result" Image. - else: it searches for the largest Area in the screen, and turns that into a temporal Image Editor showing render output. After a render, an ESC will push back the former view, if the Area type has changed. Same rules apply for the "Full Screen" option. Here an ESC will always go back to the regular Screen, and restore Area type if required. While rendering, the queue for the renderwindow isn't handled yet, so you can not zoom (nor get full redraws), as for the regular render window. Existing conflicts: - in FaceSelect mode, the Image editor enforces to display the face texture after rendering again. - when using an Image window for compositing, you'll lose the Viewer output on a render. Implementation note: While rendering updates, nothing is drawn in frontbuffer anymore. That's good news for b0rked OpenGL drivers (and faster). However, for the few OpenGL cards that don't do a "swap copy" but a "swap exchange" you get issues... has to be worked on. I'm afraid we have to drop frontbuffer drawing altogether. Other fixes: - Hotkeys NumPad 1, 2, 4, 8 will set zoom levels (was half coded only?) Use SHIFT to zoom out (smaller). - Rendering Tile updates still had draw errors on edges of tiles, in OSA only. (Caused by commit 4 days ago)
2006-06-12 14:39:08 +00:00
if(sima->info_str)
sima->info_str= MEM_dupallocN(sima->info_str);
Orange: and now for the real exr fun: float buffer support in Image window! Image as loaded in Blender (from openexr.com): http://www.blender.org/bf/exrcurve1.jpg Image with different white point: http://www.blender.org/bf/exrcurve2.jpg Image with white and black point and a curve: http://www.blender.org/bf/exrcurve3.jpg Use SHIFT+click to set the black point, and CTRL+click for white point. The buttons in the panel work too, of course. The curves work after the black/white range was corrected, so you can stick to curves with a normal 0-1 range. There's also now a general color curve, marked with 'C' button. Note; this currently only maps the float colors to a visible 8 bits per channel rect. You can save it, but when the blender file loads the curve or mapping is not executed until you click in the curves... have to look at that still. Speed for this is also quite unoptimized... still WIP, but fun!
2006-01-09 23:52:51 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
sl= sl->next;
}
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* again: from old View3D restore localview (because full) */
Initial revision
2002-10-12 11:37:38 +00:00
sl= lb2->first;
while(sl) {
if(sl->spacetype==SPACE_VIEW3D) {
View3D *v3d= (View3D*) sl;
if(v3d->localvd) {
restore_localviewdata(v3d);
New feature; User definable Clipping Planes. Press ALT+B in 3d window, draw a rect, and it becomes a clipping volume of 4 planes. You then can rotate the view anyway you like. Works for each 3d window individually. Disable it with another ALT+B press. Commit is huge because it had to change all selection code as well. The user-clipping planes are in 'eye space', the other clipping happens in projected 'viewport space'. Nice to notice is that the 'x=3200' convention (to denote a coordinate is clipped) now is a define. Define value is still a number though... but we now can get up to screens of 12000 pixels without issues! Known issue; here it refuses to draw the 'object centers' or Lamp icons within the clipping region. Can't find any reason for it... however, we might move to non-pixmaps for it anyway. Testing might reveil numerous issues, will be standby for it. Curious? Check this http://www.blender.org/bf/rt4.jpg
2005-08-20 19:18:35 +00:00
v3d->localvd= NULL;
Initial revision
2002-10-12 11:37:38 +00:00
v3d->localview= 0;
v3d->lay &= 0xFFFFFF;
}
}
sl= sl->next;
}
}
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* is called everywhere in blender */
Initial revision
2002-10-12 11:37:38 +00:00
void allqueue(unsigned short event, short val)
{
ScrArea *sa;
View3D *v3d;
SpaceButs *buts;
SpaceFile *sfile;
sa= G.curscreen->areabase.first;
while(sa) {
Result of 2 weeks of quiet coding work in Greece :) Aim was to get a total refresh of the animation system. This is needed because; - we need to upgrade it with 21st century features - current code is spaghetti/hack combo, and hides good design - it should become lag-free with using dependency graphs A full log, with complete code API/structure/design explanation will follow, that's a load of work... so here below the list with hot changes; - The entire object update system (matrices, geometry) is now centralized. Calls to where_is_object and makeDispList are forbidden, instead we tag objects 'changed' and let the depgraph code sort it out - Removed all old "Ika" code - Depgraph is aware of all relationships, including meta balls, constraints, bevelcurve, and so on. - Made depgraph aware of relation types and layers, to do smart flushing of 'changed' events. Nothing gets calculated too often! - Transform uses depgraph to detect changes - On frame-advance, depgraph flushes animated changes Armatures; Almost all armature related code has been fully built from scratch. It now reveils the original design much better, with a very clean implementation, lag free without even calculating each Bone more than once. Result is quite a speedup yes! Important to note is; 1) Armature is data containing the 'rest position' 2) Pose is the changes of rest position, and always on object level. That way more Objects can use same Pose. Also constraints are in Pose 3) Actions only contain the Ipos to change values in Poses. - Bones draw unrotated now - Drawing bones speedup enormously (10-20 times) - Bone selecting in EditMode, selection state is saved for PoseMode, and vice-versa - Undo in editmode - Bone renaming does vertexgroups, constraints, posechannels, actions, for all users of Armature in entire file - Added Bone renaming in NKey panel - Nkey PoseMode shows eulers now - EditMode and PoseMode now have 'active' bone too (last clicked) - Parenting in EditMode' CTRL+P, ALT+P, with nice options! - Pose is added in Outliner now, with showing that constraints are in the Pose, not Armature - Disconnected IK solving from constraints. It's a separate phase now, on top of the full Pose calculations - Pose itself has a dependency graph too, so evaluation order is lag free. TODO NOW; - Rotating in Posemode has incorrect inverse transform (Martin will fix) - Python Bone/Armature/Pose API disabled... needs full recode too (wait for my doc!) - Game engine will need upgrade too - Depgraph code needs revision, cleanup, can be much faster! (But, compliments for Jean-Luc, it works like a charm!) - IK changed, it now doesnt use previous position to advance to next position anymore. That system looks nice (no flips) but is not well suited for NLA and background render. TODO LATER; We now can do loadsa new nifty features as well; like: - Kill PoseMode (can be option for armatures itself) - Make B-Bones (Bezier, Bspline, like for spines) - Move all silly button level edit to 3d window (like CTRL+I = add IK) - Much better & informative drawing - Fix action/nla editors - Put all ipos in Actions (object, mesh key, lamp color) - Add hooks - Null bones - Much more advanced constraints... Bugfixes; - OGL render (view3d header) had wrong first frame on anim render - Ipo 'recording' mode had wrong playback speed - Vertex-key mode now sticks to show 'active key', until frame change -Ton-
2005-07-03 17:35:38 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
if(event==REDRAWALL) {
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
else if(sa->win != val) {
switch(event) {
case REDRAWHEADERS:
scrarea_queue_headredraw(sa);
break;
case REDRAWVIEW3D:
if(sa->spacetype==SPACE_VIEW3D) {
scrarea_queue_winredraw(sa);
if(val) scrarea_queue_headredraw(sa);
}
break;
case REDRAWVIEW3D_Z:
if(sa->spacetype==SPACE_VIEW3D) {
v3d= sa->spacedata.first;
if(v3d->drawtype==OB_SOLID) {
scrarea_queue_winredraw(sa);
if(val) scrarea_queue_headredraw(sa);
}
}
break;
case REDRAWVIEWCAM:
if(sa->spacetype==SPACE_VIEW3D) {
v3d= sa->spacedata.first;
if(v3d->persp>1) scrarea_queue_winredraw(sa);
}
break;
case REDRAWINFO:
if(sa->spacetype==SPACE_INFO) {
Lots of small changes, all for UI in Blender; ----- Killed UI frontbuffer draw The interface toolkit was drawing all live updates (while using menus/buttons) in the frontbuffer. This isn't well supported cross-platform, so time to be killed once. Now it uses *only* glReadPixels and glCopyPixels for frontbuffer access. Live updates or menus now are drawn in backbuffer always, and copied to front when needed. NOTE: it was tested, but needs thorough review! On PC systems I suspects backbuffer selection to screw up (check!). On SGI/SUN workstations it should work smooth; but I need evidence ----- Smaller fixes; - AA fonts were garbled on ATI systems. Now the AA fonts are drawn exact on pixel positions. Needs the new FTGL libb too, patch is on maillist - Rounded theme uses antialiased outlines - Pulldown and popup menus have nice softshadow now - New button type 'PULLDOWN', thats the one that callsup a pulldown menu. Should be added to themes, as is the full menu/pulldown drawing - Screendump for 1 window does the full window now, including header - Empty pulldowns (for example running blender without scripts) give no drawing error anymore For review & fun; - added curved lines as connectors, for Oops window
2004-10-03 13:49:54 +00:00
scrarea_queue_winredraw(sa);
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_headredraw(sa);
}
break;
case REDRAWIMAGE:
if(sa->spacetype==SPACE_IMAGE) {
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
break;
case REDRAWIPO:
if(sa->spacetype==SPACE_IPO) {
SpaceIpo *si;
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
if(val) {
si= sa->spacedata.first;
Stage two of the giant animation recode project; Ipo/Action/NLA cleanup -> Note; added 2 new c files (split editipo.c). MSVC needs upgrade. Impatient people can check the goodies in CMS: http://www.blender3d.org/cms/Action_and_NLA_editor.706.0.html Most work was on trying to unwind the spaghetti for editing ipos. Too much history and bad design got added here. Most evident changes: - made generic 'context' for detecting which Ipo is being edited, or to assign ipos or to retrieve ipo curves. - made generic insertkey() for all ipo types, including actions - shuffled a lot of code around to make things more logical. Also made sure local functions are not exported It is far from ready... when action/nla was added in Blender, a lot of duplicate code was generated. That's for another time. Now the goodies; - made Actions to allow any Ipo type - made NLA to define active actions, for Action window too - corrected timing for active action, so it shows the 'real time', as defined in NLA editor. I did update python code, but that would require testing. Testing is needed for this commit in general, too many changes happened on all levels of the animation system. :) Will keep track of all reports this evening, hopefully it doesnt break the pre-release schedule!
2005-10-10 17:42:48 +00:00
if (si->pin==0)
Initial revision
2002-10-12 11:37:38 +00:00
si->blocktype= val;
}
}
else if(sa->spacetype==SPACE_OOPS) {
scrarea_queue_winredraw(sa);
}
break;
case REDRAWBUTSALL:
if(sa->spacetype==SPACE_BUTS) {
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
buts= sa->spacedata.first;
buts->re_align= 1;
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
break;
case REDRAWBUTSHEAD:
if(sa->spacetype==SPACE_BUTS) {
scrarea_queue_headredraw(sa);
}
break;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
case REDRAWBUTSSCENE:
Initial revision
2002-10-12 11:37:38 +00:00
if(sa->spacetype==SPACE_BUTS) {
buts= sa->spacedata.first;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
if(buts->mainb==CONTEXT_SCENE) {
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
buts->re_align= 1;
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
}
break;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
case REDRAWBUTSOBJECT:
Initial revision
2002-10-12 11:37:38 +00:00
if(sa->spacetype==SPACE_BUTS) {
buts= sa->spacedata.first;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
if(buts->mainb==CONTEXT_OBJECT) {
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
buts->re_align= 1;
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
}
break;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
case REDRAWBUTSSHADING:
Initial revision
2002-10-12 11:37:38 +00:00
if(sa->spacetype==SPACE_BUTS) {
buts= sa->spacedata.first;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
if(buts->mainb==CONTEXT_SHADING) {
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
buts->re_align= 1;
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
}
break;
case REDRAWBUTSEDIT:
if(sa->spacetype==SPACE_BUTS) {
buts= sa->spacedata.first;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
if(buts->mainb==CONTEXT_EDITING) {
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
buts->re_align= 1;
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
}
break;
case REDRAWBUTSSCRIPT:
if(sa->spacetype==SPACE_BUTS) {
buts= sa->spacedata.first;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
if(buts->mainb==CONTEXT_SCRIPT) {
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
buts->re_align= 1;
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
}
break;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
case REDRAWBUTSLOGIC:
Initial revision
2002-10-12 11:37:38 +00:00
if(sa->spacetype==SPACE_BUTS) {
buts= sa->spacedata.first;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
if(buts->mainb==CONTEXT_LOGIC) {
Initial revision
2002-10-12 11:37:38 +00:00
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
}
break;
- another huge commit! read this! - removed src/buttons.c and include/BIF_buttons.h - added src/buttons.txt, which is the old buttons.c for review and adding code to new panels structure - changed internal events to match new buttonspace structure - added tabs for new shading group of buttons - removed loads of little warnings, -Wall now compiles src/ almost without error (hint: setenv NAN_QUIET to see it all better) Now I'm ready to do actual buttons -> panels conversion. I will do the raw versions first, others then can cleanup
2003-10-07 18:24:02 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
case REDRAWDATASELECT:
if(sa->spacetype==SPACE_FILE) {
sfile= sa->spacedata.first;
if(sfile->type==FILE_MAIN) {
freefilelist(sfile);
scrarea_queue_winredraw(sa);
}
}
else if(sa->spacetype==SPACE_OOPS) {
scrarea_queue_winredraw(sa);
}
break;
case REDRAWSEQ:
if(sa->spacetype==SPACE_SEQ) {
addqueue(sa->win, CHANGED, 1);
scrarea_queue_winredraw(sa);
scrarea_queue_headredraw(sa);
}
break;
case REDRAWOOPS:
if(sa->spacetype==SPACE_OOPS) {
scrarea_queue_winredraw(sa);
}
break;
case REDRAWNLA:
if(sa->spacetype==SPACE_NLA) {
scrarea_queue_headredraw(sa);
scrarea_queue_winredraw(sa);
}
case REDRAWACTION:
if(sa->spacetype==SPACE_ACTION) {
scrarea_queue_headredraw(sa);
scrarea_queue_winredraw(sa);
}
break;
case REDRAWTEXT:
if(sa->spacetype==SPACE_TEXT) {
scrarea_queue_winredraw(sa);
}
break;
BPython - first step for better integration of Python in Blender: - add a new space: Space Script - add a new dna struct: Script - add these two properly everywhere they are meant to It's not a tiny commit, but most of it is ground work for what is still to be done. Right now the benefits should be: freeing the Text Editor to be used in a window even while a script w/ gui in "on" and letting more than one currently running script w/ gui be accessible from each window Some files are added, so some build systems (not autotools) will need updates
2003-12-14 01:18:09 +00:00
case REDRAWSCRIPT:
if (sa->spacetype==SPACE_SCRIPT) {
scrarea_queue_winredraw(sa);
}
break;
Initial revision
2002-10-12 11:37:38 +00:00
case REDRAWSOUND:
if(sa->spacetype==SPACE_SOUND) {
scrarea_queue_headredraw(sa);
scrarea_queue_winredraw(sa);
}
break;
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
case REDRAWTIME:
if(sa->spacetype==SPACE_TIME) {
scrarea_queue_headredraw(sa);
scrarea_queue_winredraw(sa);
}
break;
Orange: - Sunday merger with bf-blender - Foundations for new Node editor in Blender, generic framework that can be used for Material/Texture, Compositing, Logic or maybe even Sequencer. Note: this doesn't do anything yet, nor save! Is just to get this nice in CVS now. :)
2005-12-18 13:46:01 +00:00
case REDRAWNODE:
if(sa->spacetype==SPACE_NODE) {
scrarea_queue_headredraw(sa);
scrarea_queue_winredraw(sa);
}
break;
More compositing goodies. - Texture Node Allows to use any Blender Texture block as input for masks or color blending. The texture node doesn't generate a real image, but adjusts to the size as mapped with during an operation. So it won't work to use it as Image input for Blur or Filter nodes. Note; the Vector inputs for this node only work with manual input now! - Translation Node Give any image an offset in X or Y direction For the Texture node to work, I needed to move the central 'pixel processor' up one level... to allow differently sized images to merge and allow 'procedural images' without size. Temporal image of the day: http://www.blender.org/bf/rt.jpg
2006-02-19 14:55:16 +00:00
case RECALC_COMPOSITE:
if(sa->spacetype==SPACE_NODE) {
addqueue(sa->win, UI_BUT_EVENT, B_NODE_TREE_EXEC);
}
break;
Animated UI for TimeLine "Play" Using the Play button in timeline, now uses an event-driven system to update the animation system and signal windows to redraw. Meaning the full UI remains responsive! Check the new Pulldown "Playback" to set which windows you like to see updated. Same settings is used for LMB 'dragging' frames in Timeline. Implementation notes; - the Icon for 'Pause' (or stop) has to be made yet, I commit this from my laptop... all was coded during a 2 x 5 hour train ride to germany - the anim playback system (ALT+A too) now uses correct "frames per second" as maximum speed. Buttons can be found in 3 places in the UI, also added it as pulldown item - The system works with 'screen handlers', which has been coded with using Python (networked) events or verse in mind too. A doc on that will follow. - the buttons code has been made 'resistant' to animated UIs too, preventing flashing of hilites. - All subloops (like transform) stop playback, with exception of MMB view manipulations. As extra; found tweak to make Textured AA fonts draw without distortion. Looks perfect here on laptop now (like Pixmap fonts) and is 20x faster.
2005-05-11 20:01:42 +00:00
case REDRAWANIM:
if ELEM6(sa->spacetype, SPACE_IPO, SPACE_SOUND, SPACE_TIME, SPACE_NLA, SPACE_ACTION, SPACE_SEQ) {
scrarea_queue_winredraw(sa);
if(val) scrarea_queue_headredraw(sa);
}
Initial revision
2002-10-12 11:37:38 +00:00
}
}
sa= sa->next;
}
}
void allspace(unsigned short event, short val)
{
bScreen *sc;
sc= G.main->screen.first;
while(sc) {
ScrArea *sa= sc->areabase.first;
while(sa) {
SpaceLink *sl= sa->spacedata.first;
while(sl) {
switch(event) {
case REMAKEIPO:
if(sl->spacetype==SPACE_IPO) {
SpaceIpo *si= (SpaceIpo *)sl;
{
if(si->editipo) MEM_freeN(si->editipo);
si->editipo= 0;
free_ipokey(&si->ipokey);
}
}
break;
case OOPS_TEST:
if(sl->spacetype==SPACE_OOPS) {
SpaceOops *so= (SpaceOops *)sl;
so->flag |= SO_TESTBLOCKS;
}
break;
}
sl= sl->next;
}
sa= sa->next;
}
sc= sc->id.next;
}
}
Tweaked the force_draw() calls, to allow headerprint() to work while doing a transform. Solves bug reported by Brecht about this.
2004-11-07 18:20:44 +00:00
/* if header==1, then draw header for curarea too. Excepption for headerprint()... */
void force_draw(int header)
Initial revision
2002-10-12 11:37:38 +00:00
{
UI goodies & cleanup - TimeLine: Marker grabbing works now. Use GKEY or select+drag, as usual Holding CTRL will step with 1 second (corrected for ntsc dudes yes!) Also added this in header pulldown - Time values and Time grid draw fixed for Seconds display. It used to draw steps of 2/5/10/20/50/100 etc. frames. Now does steps in seconds. Again corrected for "Frames/Sec" value. - "Frames/Sec" button redraws TimeLine, Secquencer, etc - Bug fixed in editing Theme for TimeLine (was editing Image Select...) - Added Grid color to Theme choices for Ipo, TimeLine, Sequencer, NLA, Action, Sound. Was missing!
2005-05-08 11:24:46 +00:00
/* draws all areas that show something identical to curarea */
Change the order of "if flag" checking so that weightpaint and vertex paint modes catch the UKey for undo before face select. I was having to switch out of face select to undo then go back into face select mode. FaseSelect+WeightPaint is very usefull, while wait painting its very unlikely youd want to be UV mapping faces. Also Made all space.c's c++ comments into C style.
2006-06-26 06:59:59 +00:00
extern int afterqtest(short win, unsigned short evt); /*editscreen.c*/
Initial revision
2002-10-12 11:37:38 +00:00
ScrArea *tempsa, *sa;
scrarea_do_windraw(curarea);
Tweaked the force_draw() calls, to allow headerprint() to work while doing a transform. Solves bug reported by Brecht about this.
2004-11-07 18:20:44 +00:00
if(header) scrarea_do_headdraw(curarea);
Initial revision
2002-10-12 11:37:38 +00:00
tempsa= curarea;
sa= G.curscreen->areabase.first;
while(sa) {
if(sa!=tempsa && sa->spacetype==tempsa->spacetype) {
Bugfix #3046 When using 3d window "unlocked" (own layer and own camera possible), the dependency updates didn't work, these were only using Scene layers. Changed the dependency graph call DAG_scene_flush_update() to accept an argument for all visible layers in a Screen.
2005-10-03 09:04:57 +00:00
areawinset(sa->win);
scrarea_do_windraw(sa);
scrarea_do_headdraw(sa);
Initial revision
2002-10-12 11:37:38 +00:00
}
sa= sa->next;
}
screen_swapbuffers();
Pooh pooh! This backbuffer system for selection codes works much easier on osx with AUX buffers, than on other systems with GL_BACK buffer... Now i've added a check in force_draw to also redraw the backbuffer, if needed. ANother weak point in the sublooping system in blender.
2004-09-29 18:08:04 +00:00
#ifndef __APPLE__
Bugfix, the lock button in the uv editor didn't work, the 3d view would always redraw even if it was disabled (only on non-apple).
2005-08-11 13:08:08 +00:00
if(tempsa->spacetype==SPACE_VIEW3D) {
/* de the afterqueuetest for backbuf draw */
sa= G.curscreen->areabase.first;
while(sa) {
if(sa->spacetype==SPACE_VIEW3D) {
if(afterqtest(sa->win, BACKBUFDRAW)) {
areawinset(sa->win);
backdrawview3d(0);
}
Pooh pooh! This backbuffer system for selection codes works much easier on osx with AUX buffers, than on other systems with GL_BACK buffer... Now i've added a check in force_draw to also redraw the backbuffer, if needed. ANother weak point in the sublooping system in blender.
2004-09-29 18:08:04 +00:00
}
Bugfix, the lock button in the uv editor didn't work, the 3d view would always redraw even if it was disabled (only on non-apple).
2005-08-11 13:08:08 +00:00
sa= sa->next;
Pooh pooh! This backbuffer system for selection codes works much easier on osx with AUX buffers, than on other systems with GL_BACK buffer... Now i've added a check in force_draw to also redraw the backbuffer, if needed. ANother weak point in the sublooping system in blender.
2004-09-29 18:08:04 +00:00
}
}
#endif
if(curarea!=tempsa) areawinset(tempsa->win);
Initial revision
2002-10-12 11:37:38 +00:00
}
Animated UI for TimeLine "Play" Using the Play button in timeline, now uses an event-driven system to update the animation system and signal windows to redraw. Meaning the full UI remains responsive! Check the new Pulldown "Playback" to set which windows you like to see updated. Same settings is used for LMB 'dragging' frames in Timeline. Implementation notes; - the Icon for 'Pause' (or stop) has to be made yet, I commit this from my laptop... all was coded during a 2 x 5 hour train ride to germany - the anim playback system (ALT+A too) now uses correct "frames per second" as maximum speed. Buttons can be found in 3 places in the UI, also added it as pulldown item - The system works with 'screen handlers', which has been coded with using Python (networked) events or verse in mind too. A doc on that will follow. - the buttons code has been made 'resistant' to animated UIs too, preventing flashing of hilites. - All subloops (like transform) stop playback, with exception of MMB view manipulations. As extra; found tweak to make Textured AA fonts draw without distortion. Looks perfect here on laptop now (like Pixmap fonts) and is 20x faster.
2005-05-11 20:01:42 +00:00
/* if header==1, then draw header for curarea too. Exception for headerprint()... */
Tweaked the force_draw() calls, to allow headerprint() to work while doing a transform. Solves bug reported by Brecht about this.
2004-11-07 18:20:44 +00:00
void force_draw_plus(int type, int header)
Initial revision
2002-10-12 11:37:38 +00:00
{
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* draws all areas that show something like curarea AND areas of 'type' */
Initial revision
2002-10-12 11:37:38 +00:00
ScrArea *tempsa, *sa;
scrarea_do_windraw(curarea);
Tweaked the force_draw() calls, to allow headerprint() to work while doing a transform. Solves bug reported by Brecht about this.
2004-11-07 18:20:44 +00:00
if(header) scrarea_do_headdraw(curarea);
Initial revision
2002-10-12 11:37:38 +00:00
tempsa= curarea;
sa= G.curscreen->areabase.first;
while(sa) {
if(sa!=tempsa && (sa->spacetype==tempsa->spacetype || sa->spacetype==type)) {
if(ELEM5(sa->spacetype, SPACE_VIEW3D, SPACE_IPO, SPACE_SEQ, SPACE_BUTS, SPACE_ACTION)) {
areawinset(sa->win);
scrarea_do_windraw(sa);
Potential fix #2 for error in 'flashing UI' while adding Bones. Also added redraw events for object buttons, to show constraints when selecting bones
2004-11-02 15:58:36 +00:00
scrarea_do_headdraw(sa);
Initial revision
2002-10-12 11:37:38 +00:00
}
}
sa= sa->next;
}
if(curarea!=tempsa) areawinset(tempsa->win);
screen_swapbuffers();
}
Tweaked the force_draw() calls, to allow headerprint() to work while doing a transform. Solves bug reported by Brecht about this.
2004-11-07 18:20:44 +00:00
/* if header==1, then draw header for curarea too. Excepption for headerprint()... */
void force_draw_all(int header)
Initial revision
2002-10-12 11:37:38 +00:00
{
LAST of the c code comment translations... hooray! Might be possible I mised an .h or so, just notify me in that case.
2003-04-30 13:22:26 +00:00
/* redraws all */
Initial revision
2002-10-12 11:37:38 +00:00
ScrArea *tempsa, *sa;
tempsa= curarea;
sa= G.curscreen->areabase.first;
while(sa) {
if(sa->headwin) {
scrarea_do_headdraw(sa);
Tweaked the force_draw() calls, to allow headerprint() to work while doing a transform. Solves bug reported by Brecht about this.
2004-11-07 18:20:44 +00:00
if(sa!=curarea || header) scrarea_do_headchange(sa);
Initial revision
2002-10-12 11:37:38 +00:00
}
if(sa->win) {
scrarea_do_windraw(sa);
}
sa= sa->next;
}
if(curarea!=tempsa) areawinset(tempsa->win);
screen_swapbuffers();
}
/***/
SpaceType *spaceaction_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Action");
- for test: action space has no 'winchange' callback now. well. the callback is empty!
2003-06-21 21:34:40 +00:00
spacetype_set_winfuncs(st, drawactionspace, changeactionspace, winqreadactionspace);
Initial revision
2002-10-12 11:37:38 +00:00
}
return st;
}
SpaceType *spacebuts_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Buts");
spacetype_set_winfuncs(st, drawbutspace, changebutspace, winqreadbutspace);
}
return st;
}
SpaceType *spacefile_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("File");
spacetype_set_winfuncs(st, drawfilespace, NULL, winqreadfilespace);
}
return st;
}
SpaceType *spaceimage_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Image");
Compositing workflow upgrade; You now can set a Preview panel in the Image window, to define a sub-rect of an image to be processed. Works like the preview in 3D Window. Just press SHIFT+P to get it activated. Very nice speedup! This is how it works: - The compositor still uses the scene image size (including % setting) for Viewer or Composite output size - If a preview exists, it calculates the cropped rect from its position in the Image window, and stores that in the Scene render data - On composite execute, it copies only this part from the 'generator nodes', right now Images or Render Results. That makes the entire composite tree only using small rects, so it will execute fast. - Also the render window will only display the cropped rect, and on F12 only the cropped part is being executed - On rendering in background mode, the cropping is ignored though. Usability notes: - translating or zooming view will automatically invoke a recalculation - if you zoom in on details, the calculated rect will even become smaller - only one Imagewindow can have this Preview Panel, to prevent conflicts of what the cropped area should be. Compositing is on Scene level, not local per image window. (Note; 3D Previews are local per window!) - Closing the preview panel will invoke a full-size recalculation - All passes/layers from rendering are nicely cropped, including Z and vectors. The work to make the compositor do cropping was simple, but getting the Image window displaying correctly and get all events OK was a lot of work... indeed, we need to refactor Image Window usage once. Sorry for making the mess even bigger now. :) I've tried not to interfere with UV edit or Paint though... only when you're in compositing mode the panel will work. BUG fix: 3D Preview render didn't work when multiple layers were set in the current scene.
2006-02-09 11:07:04 +00:00
spacetype_set_winfuncs(st, drawimagespace, changeimagepace, winqreadimagespace);
Initial revision
2002-10-12 11:37:38 +00:00
}
return st;
}
SpaceType *spaceimasel_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Imasel");
Canonize all space functions to follow the drawXXXspace and winqreadXXXspace conventions.
2003-03-24 00:06:40 +00:00
spacetype_set_winfuncs(st, drawimaselspace, NULL, winqreadimaselspace);
Initial revision
2002-10-12 11:37:38 +00:00
}
return st;
}
SpaceType *spaceinfo_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Info");
spacetype_set_winfuncs(st, drawinfospace, NULL, winqreadinfospace);
}
return st;
}
SpaceType *spaceipo_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Ipo");
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
spacetype_set_winfuncs(st, drawipospace, changeview2dspace, winqreadipospace);
Initial revision
2002-10-12 11:37:38 +00:00
}
return st;
}
SpaceType *spacenla_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Nla");
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
spacetype_set_winfuncs(st, drawnlaspace, changeview2dspace, winqreadnlaspace);
Initial revision
2002-10-12 11:37:38 +00:00
}
return st;
}
SpaceType *spaceoops_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Oops");
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
spacetype_set_winfuncs(st, drawoopsspace, changeview2dspace, winqreadoopsspace);
Initial revision
2002-10-12 11:37:38 +00:00
}
return st;
}
SpaceType *spaceseq_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Sequence");
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
spacetype_set_winfuncs(st, drawseqspace, changeview2dspace, winqreadseqspace);
Initial revision
2002-10-12 11:37:38 +00:00
}
return st;
}
SpaceType *spacesound_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Sound");
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
spacetype_set_winfuncs(st, drawsoundspace, changeview2dspace, winqreadsoundspace);
Initial revision
2002-10-12 11:37:38 +00:00
}
return st;
}
SpaceType *spacetext_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Text");
spacetype_set_winfuncs(st, drawtextspace, NULL, winqreadtextspace);
}
return st;
}
BPython - first step for better integration of Python in Blender: - add a new space: Space Script - add a new dna struct: Script - add these two properly everywhere they are meant to It's not a tiny commit, but most of it is ground work for what is still to be done. Right now the benefits should be: freeing the Text Editor to be used in a window even while a script w/ gui in "on" and letting more than one currently running script w/ gui be accessible from each window Some files are added, so some build systems (not autotools) will need updates
2003-12-14 01:18:09 +00:00
SpaceType *spacescript_get_type(void)
{
static SpaceType *st = NULL;
if (!st) {
st = spacetype_new("Script");
spacetype_set_winfuncs(st, drawscriptspace, NULL, winqreadscriptspace);
}
return st;
}
Initial revision
2002-10-12 11:37:38 +00:00
SpaceType *spaceview3d_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("View3D");
Update space dispatch: - drawXXXspace, changeXXXspace, and winqreadXXXspace now receive the area and spacedata as explicit arguments, allowing them to access private data w/o going through globals. - pass the new BWinEvent through to the winqreadXXXspace, allowing future access to extended event data. Removed direct calls to winqreadXXXspace to simulate user actions, replaced by calls to action functions in edit.c or the appropriate handler.
2003-03-24 01:46:05 +00:00
spacetype_set_winfuncs(st, drawview3dspace, changeview3dspace, winqreadview3dspace);
Initial revision
2002-10-12 11:37:38 +00:00
}
return st;
}
Added the new Timeline Window, copied from Tuhopuu, coded by Matt Ebb. Main change is that it's an own Space type now, not part of the Audio window... the audio window should restrict to own options. This way functionality is nicely separated. Since it's the first time I added a new space (since long!) I've made an extensive tutorial as well. You can find that here: http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html Notes for using timewindow; - Add time markers with MKey - CTRL+M gives option to name Marker - Markers cannot be moved yet... - Pageup-Pagedown keys moves current frame to next-prev Marker - Xkey removes Markers - If an object has Ipos or an Action, it draws key lines - CTRL+Pageup-Pagedown moves current frame to next-prev Key - Press S or E to set start/end frame for playback Notes about the implementation in Tuhopuu: - Add new Marker now selects new, deselects others - Selecting Marker didn't work like elsewhere in Blender, on click it should deselect all, except the indicated Marker. Not when holding SHIFT of course - Not exported functions are static now - Removed unused defines (MARKER_NONE NEXT_AVAIL) - Drawing order was confusing, doing too many matrix calls - Removed not needed scrollbar, added new function to draw time values. (Has advantage the MMB scroll works not confusing on a scrollbar) - Added proper support for 'frame mapping' - The string button (name Marker) had a bug (checked str[64] while str was only 64 long) - String button itself didn't allow "OK on enter" - Made frame buttons in header larger, the arrows overlapped - Removed support for negative frame values, that won't work so simple!
2005-05-05 17:19:21 +00:00
SpaceType *spacetime_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Time");
spacetype_set_winfuncs(st, drawtimespace, NULL, winqreadtimespace);
}
return st;
}
Orange: - Sunday merger with bf-blender - Foundations for new Node editor in Blender, generic framework that can be used for Material/Texture, Compositing, Logic or maybe even Sequencer. Note: this doesn't do anything yet, nor save! Is just to get this nice in CVS now. :)
2005-12-18 13:46:01 +00:00
SpaceType *spacenode_get_type(void)
{
static SpaceType *st= NULL;
if (!st) {
st= spacetype_new("Node");
Orange; update commit on WIP project for Noodle editing. :) - Grabbing works (Gkey) or tweak (LMB) or use RMB click-drag for grab - Shift+d works - Akey: select all - Drawing links works too now!
2005-12-18 23:08:22 +00:00
spacetype_set_winfuncs(st, drawnodespace, changeview2dspace, winqreadnodespace);
Orange: - Sunday merger with bf-blender - Foundations for new Node editor in Blender, generic framework that can be used for Material/Texture, Compositing, Logic or maybe even Sequencer. Note: this doesn't do anything yet, nor save! Is just to get this nice in CVS now. :)
2005-12-18 13:46:01 +00:00
}
return st;
}
Copy Permalink