2011-02-23 10:52:22 +00:00
|
|
|
/*
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
* ***** BEGIN GPL LICENSE BLOCK *****
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
|
* of the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software Foundation,
|
2010-02-12 13:34:04 +00:00
|
|
|
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
*
|
|
|
|
|
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* The Original Code is: all of this file.
|
|
|
|
|
*
|
|
|
|
|
* Contributor(s): none yet.
|
|
|
|
|
*
|
|
|
|
|
* ***** END GPL LICENSE BLOCK *****
|
|
|
|
|
*/
|
|
|
|
|
|
2011-02-27 20:29:51 +00:00
|
|
|
/** \file blender/editors/interface/interface_intern.h
|
|
|
|
|
* \ingroup edinterface
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
2012-02-17 18:59:41 +00:00
|
|
|
#ifndef __INTERFACE_INTERN_H__
|
|
|
|
|
#define __INTERFACE_INTERN_H__
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2014-01-20 11:13:53 +11:00
|
|
|
#include "BLI_compiler_attrs.h"
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
#include "UI_resources.h"
|
|
|
|
|
#include "RNA_types.h"
|
2014-11-06 20:19:21 +01:00
|
|
|
#include "DNA_listBase.h"
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
struct ARegion;
|
UI: don't use operators anymore for handling user interface events, but rather
a special UI handler which makes the code clearer. This UI handler is attached
to the region along with other handlers, and also gets a callback when all
handlers for the region are removed to ensure things are properly cleaned up.
This should fix XXX's in the UI code related to events and context switching.
Most of the changes are in interface_handlers.c, which was renamed from
interface_ops.c, to convert operators to the UI handler. UI code notes:
* uiBeginBlock/uiEndBlock/uiFreeBlocks now takes a context argument, this is
required to properly cancel things like timers or tooltips when the region
gets removed.
* UI_add_region_handlers will add the region level UI handlers, to be used
when adding keymap handlers etc. This replaces the UI keymap.
* When the UI code starts a modal interaction (number sliding, text editing,
opening a menu, ..), it will add an UI handler at the window level which
will block events.
Windowmanager changes:
* Added an UI handler next to the existing keymap and operator modal handlers.
It has an event handling and remove callback, and like operator modal handlers
will remember the area and region if it is registered at the window level.
* Removed the MESSAGE event.
* Operator cancel and UI handler remove callbacks now get the
window/area/region restored in the context, like the operator modal and UI
handler event callbacks.
* Regions now receive MOUSEMOVE events for the mouse going outside of the
region. This was already happening for areas, but UI buttons are at the region
level so we need it there.
Issues:
* Tooltips and menus stay open when switching to another window, and button
highlight doesn't work without moving the mouse first when Blender starts up.
I tried using some events like Q_FIRSTTIME, WINTHAW, but those don't seem to
arrive..
* Timeline header buttons seem to be moving one pixel or so sometimes when
interacting with them.
* Seems not due to this commit, but UI and keymap handlers are leaking. It
seems that handlers are being added to regions in all screens, also in regions
of areas that are not visible, but these handlers are not removed. Probably
there should only be handlers in visible regions?
2008-12-10 04:36:33 +00:00
|
|
|
struct bContext;
|
2008-12-16 07:55:43 +00:00
|
|
|
struct uiHandleButtonData;
|
2008-12-26 13:11:04 +00:00
|
|
|
struct wmEvent;
|
UI: Layout Engine
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
2009-05-15 11:19:59 +00:00
|
|
|
struct wmOperatorType;
|
Code holiday commit:
- fix: user pref, window title was reset to 'Blender' on tab usage
- Undo history menu back:
- name "Undo History"
- hotkey alt+ctrl+z (alt+apple+z for mac)
- works like 2.4x, only for global undo, editmode and particle edit.
- Menu scroll
- for small windows or screens, popup menus now allow to display
all items, using internal scrolling
- works with a timer, scrolling 10 items per second when mouse
is over the top or bottom arrow
- if menu is too big to display, it now draws to top or bottom,
based on largest available space.
- also works for hotkey driven pop up menus.
- User pref "DPI" follows widget/layout size
- widgets & headers now become bigger and smaller, to match
'dpi' font sizes. Works well to match UI to monitor size.
- note that icons can get fuzzy, we need better mipmaps for it
2011-06-04 17:03:46 +00:00
|
|
|
struct wmTimer;
|
2009-04-10 14:06:24 +00:00
|
|
|
struct uiStyle;
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
struct uiWidgetColors;
|
UI: Layout Engine
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
2009-05-15 11:19:59 +00:00
|
|
|
struct uiLayout;
|
2009-05-28 23:13:42 +00:00
|
|
|
struct bContextStore;
|
2009-06-25 15:41:27 +00:00
|
|
|
struct Scene;
|
|
|
|
|
struct ID;
|
Drag and drop 2.5 integration! Finally, slashdot regulars can use
Blender too now! :)
** Drag works as follows:
- drag-able items are defined by the standard interface ui toolkit
- each button can get this feature, via uiButSetDragXXX(but, ...).
There are calls to define drag-able images, ID blocks, RNA paths,
file paths, and so on. By default you drag an icon, exceptionally
an ImBuf
- Drag items are registered centrally in the WM, it allows more drag
items simultaneous too, but not implemented
** Drop works as follows:
- On mouse release, and if drag items exist in the WM, it converts
the mouse event to an EVT_DROP type. This event then gets the full
drag info as customdata
- drop regions are defined with WM_dropbox_add(), similar to keymaps
you can make a "drop map" this way, which become 'drop map handlers'
in the queues.
- next to that the UI kit handles some common button types (like
accepting ID or names) to be catching a drop event too.
- Every "drop box" has two callbacks:
- poll() = check if the event drag data is relevant for this box
- copy() = fill in custom properties in the dropbox to initialize
an operator
- The dropbox handler then calls its standard Operator with its
dropbox properties.
** Currently implemented
Drag items:
- ID icons in browse buttons
- ID icons in context menu of properties region
- ID icons in outliner and rna viewer
- FileBrowser icons
- FileBrowser preview images
Drag-able icons are subtly visualized by making them brighter a bit
on mouse-over. In case the icon is a button or UI element too (most
cases), the drag-able feature will make the item react to
mouse-release instead of mouse-press.
Drop options:
- UI buttons: ID and text buttons (paste name)
- View3d: Object ID drop copies object
- View3d: Material ID drop assigns to object under cursor
- View3d: Image ID drop assigns to object UV texture under cursor
- Sequencer: Path drop will add either Image or Movie strip
- Image window: Path drop will open image
** Drag and drop Notes:
- Dropping into another Blender window (from same application) works
too. I've added code that passes on mousemoves and clicks to other
windows, without activating them though. This does make using multi-window
Blender a bit friendler.
- Dropping a file path to an image, is not the same as dropping an
Image ID... keep this in mind. Sequencer for example wants paths to
be dropped, textures in 3d window wants an Image ID.
- Although drop boxes could be defined via Python, I suggest they're
part of the UI and editor design (= how we want an editor to work), and
not default offered configurable like keymaps.
- At the moment only one item can be dragged at a time. This is for
several reasons.... For one, Blender doesn't have a well defined
uniform way to define "what is selected" (files, outliner items, etc).
Secondly there's potential conflicts on what todo when you drop mixed
drag sets on spots. All undefined stuff... nice for later.
- Example to bypass the above: a collection of images that form a strip,
should be represented in filewindow as a single sequence anyway.
This then will fit well and gets handled neatly by design.
- Another option to check is to allow multiple options per drop... it
could show the operator as a sort of menu, allowing arrow or scrollwheel
to choose. For time being I'd prefer to try to design a singular drop
though, just offer only one drop action per data type on given spots.
- What does work already, but a tad slow, is to use a function that
detects an object (type) under cursor, so a drag item's option can be
further refined (like drop object on object = parent). (disabled)
** More notes
- Added saving for Region layouts (like split points for toolbar)
- Label buttons now handle mouse over
- File list: added full path entry for drop feature.
- Filesel bugfix: wm_operator_exec() got called there and fully handled,
while WM event code tried same. Added new OPERATOR_HANDLED flag for this.
Maybe python needs it too?
- Cocoa: added window move event, so multi-win setups work OK (didnt save).
- Interface_handlers.c: removed win->active
- Severe area copy bug: area handlers were not set to NULL
- Filesel bugfix: next/prev folder list was not copied on area copies
** Leftover todos
- Cocoa windows seem to hang on cases still... needs check
- Cocoa 'draw overlap' swap doesn't work
- Cocoa window loses focus permanently on using Spotlight
(for these reasons, makefile building has Carbon as default atm)
- ListView templates in UI cannot become dragged yet, needs review...
it consists of two overlapping UI elements, preventing handling icon clicks.
- There's already Ghost library code to handle dropping from OS
into Blender window. I've noticed this code is unfinished for Macs, but
seems to be complete for Windows. Needs test... currently, an external
drop event will print in console when succesfully delivered to Blender's WM.
2010-01-26 18:18:21 +00:00
|
|
|
struct ImBuf;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2009-04-07 17:08:26 +00:00
|
|
|
/* ****************** general defines ************** */
|
|
|
|
|
|
2013-11-23 18:43:23 +01:00
|
|
|
#define RNA_NO_INDEX -1
|
|
|
|
|
#define RNA_ENUM_VALUE -2
|
|
|
|
|
|
2009-04-07 17:08:26 +00:00
|
|
|
/* visual types for drawing */
|
|
|
|
|
/* for time being separated from functional types */
|
|
|
|
|
typedef enum {
|
2009-06-24 14:16:56 +00:00
|
|
|
/* default */
|
|
|
|
|
UI_WTYPE_REGULAR,
|
|
|
|
|
|
2009-04-07 17:08:26 +00:00
|
|
|
/* standard set */
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
UI_WTYPE_LABEL,
|
2009-04-07 17:08:26 +00:00
|
|
|
UI_WTYPE_TOGGLE,
|
2014-11-09 21:20:40 +01:00
|
|
|
UI_WTYPE_CHECKBOX,
|
2009-04-07 17:08:26 +00:00
|
|
|
UI_WTYPE_RADIO,
|
|
|
|
|
UI_WTYPE_NUMBER,
|
|
|
|
|
UI_WTYPE_SLIDER,
|
|
|
|
|
UI_WTYPE_EXEC,
|
2012-03-19 22:29:16 +00:00
|
|
|
UI_WTYPE_TOOLTIP,
|
2009-04-07 17:08:26 +00:00
|
|
|
|
|
|
|
|
/* strings */
|
|
|
|
|
UI_WTYPE_NAME,
|
|
|
|
|
UI_WTYPE_NAME_LINK,
|
|
|
|
|
UI_WTYPE_POINTER_LINK,
|
|
|
|
|
UI_WTYPE_FILENAME,
|
|
|
|
|
|
|
|
|
|
/* menus */
|
|
|
|
|
UI_WTYPE_MENU_RADIO,
|
2009-09-28 15:59:09 +00:00
|
|
|
UI_WTYPE_MENU_ICON_RADIO,
|
2009-04-07 17:08:26 +00:00
|
|
|
UI_WTYPE_MENU_POINTER_LINK,
|
2011-11-07 22:28:49 +00:00
|
|
|
UI_WTYPE_MENU_NODE_LINK,
|
2009-04-07 17:08:26 +00:00
|
|
|
|
|
|
|
|
UI_WTYPE_PULLDOWN,
|
|
|
|
|
UI_WTYPE_MENU_ITEM,
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
UI_WTYPE_MENU_ITEM_RADIAL,
|
2009-04-07 17:08:26 +00:00
|
|
|
UI_WTYPE_MENU_BACK,
|
2012-03-19 22:29:16 +00:00
|
|
|
|
2009-04-07 17:08:26 +00:00
|
|
|
/* specials */
|
|
|
|
|
UI_WTYPE_ICON,
|
|
|
|
|
UI_WTYPE_SWATCH,
|
|
|
|
|
UI_WTYPE_RGB_PICKER,
|
2014-11-09 21:20:40 +01:00
|
|
|
UI_WTYPE_UNITVEC,
|
2009-06-24 14:16:56 +00:00
|
|
|
UI_WTYPE_BOX,
|
2009-07-21 01:26:17 +00:00
|
|
|
UI_WTYPE_SCROLL,
|
2010-05-27 08:22:16 +00:00
|
|
|
UI_WTYPE_LISTITEM,
|
Fix [#35750] list items in properties editor (text colors not following list item theme).
Issue goes back since we stopped using LISTROW button to draw item's name (i.e. since we have custom buttons in list items!).
This commit:
* Adds a new flag to uiBlock, UI_BLOCK_LIST_ITEM, to mark blocks used for each list item.
* Adds a new button type, LISTLABEL, which basically behaves exactly as LABEL, but uses wcol_list_item color set.
* When uiItemL is called, it checks whether current block has UI_BLOCK_LIST_ITEM set, and if so, switch produced button to LISTLABEL type.
* Adds a new helper func, ui_layout_list_set_labels_active, called after the active list item has been "drawn", to set all LISTLABEL buttons as UI_SELECT.
Note custom widget_state_label() was removed, in interface_widgets.c, as it did nothing more than default widget_state().
Thanks to Brecht for the review and advices.
2013-06-26 07:28:55 +00:00
|
|
|
UI_WTYPE_PROGRESSBAR,
|
2009-04-07 17:08:26 +00:00
|
|
|
} uiWidgetTypeEnum;
|
|
|
|
|
|
2012-10-31 12:56:04 +00:00
|
|
|
/* menu scrolling */
|
|
|
|
|
#define UI_MENU_SCROLL_ARROW 12
|
|
|
|
|
#define UI_MENU_SCROLL_MOUSE (UI_MENU_SCROLL_ARROW + 2)
|
|
|
|
|
#define UI_MENU_SCROLL_PAD 4
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
/* panel limits */
|
2012-05-08 18:29:02 +00:00
|
|
|
#define UI_PANEL_MINX 100
|
|
|
|
|
#define UI_PANEL_MINY 70
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
/* uiBut->flag */
|
2013-11-21 14:43:08 +01:00
|
|
|
enum {
|
|
|
|
|
UI_SELECT = (1 << 0), /* use when the button is pressed */
|
|
|
|
|
UI_SCROLLED = (1 << 1), /* temp hidden, scrolled away */
|
|
|
|
|
UI_ACTIVE = (1 << 2),
|
|
|
|
|
UI_HAS_ICON = (1 << 3),
|
|
|
|
|
UI_TEXTINPUT = (1 << 4),
|
|
|
|
|
UI_HIDDEN = (1 << 5),
|
|
|
|
|
/* warn: rest of uiBut->flag in UI_interface.h */
|
|
|
|
|
};
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2015-04-21 14:24:13 +10:00
|
|
|
/* some buttons display icons only under special conditions
|
|
|
|
|
* (e.g. 'x' icon in search menu) - used with ui_but_icon_extra_get */
|
|
|
|
|
typedef enum uiButExtraIconType {
|
|
|
|
|
UI_BUT_ICONEXTRA_NONE = 1,
|
|
|
|
|
UI_BUT_ICONEXTRA_UNLINK,
|
|
|
|
|
UI_BUT_ICONEXTRA_EYEDROPPER,
|
|
|
|
|
} uiButExtraIconType;
|
|
|
|
|
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
/* but->pie_dir */
|
|
|
|
|
typedef enum RadialDirection {
|
|
|
|
|
UI_RADIAL_NONE = -1,
|
|
|
|
|
UI_RADIAL_N = 0,
|
|
|
|
|
UI_RADIAL_NE = 1,
|
|
|
|
|
UI_RADIAL_E = 2,
|
|
|
|
|
UI_RADIAL_SE = 3,
|
|
|
|
|
UI_RADIAL_S = 4,
|
|
|
|
|
UI_RADIAL_SW = 5,
|
|
|
|
|
UI_RADIAL_W = 6,
|
|
|
|
|
UI_RADIAL_NW = 7,
|
|
|
|
|
} RadialDirection;
|
|
|
|
|
|
|
|
|
|
extern const char ui_radial_dir_order[8];
|
|
|
|
|
extern const char ui_radial_dir_to_numpad[8];
|
|
|
|
|
extern const short ui_radial_dir_to_angle[8];
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
/* internal panel drawing defines */
|
2012-05-08 18:29:02 +00:00
|
|
|
#define PNL_GRID (UI_UNIT_Y / 5) /* 4 default */
|
|
|
|
|
#define PNL_HEADER (UI_UNIT_Y + 4) /* 24 default */
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
/* Button text selection:
|
|
|
|
|
* extension direction, selextend, inside ui_do_but_TEX */
|
2012-05-08 18:29:02 +00:00
|
|
|
#define EXTEND_LEFT 1
|
|
|
|
|
#define EXTEND_RIGHT 2
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2010-04-04 02:37:22 +00:00
|
|
|
/* for scope resize zone */
|
2012-05-08 18:29:02 +00:00
|
|
|
#define SCOPE_RESIZE_PAD 9
|
2010-04-04 02:37:22 +00:00
|
|
|
|
2012-09-03 10:12:25 +00:00
|
|
|
/* bit button defines */
|
|
|
|
|
/* Bit operations */
|
2012-09-11 23:10:23 +00:00
|
|
|
#define UI_BITBUT_TEST(a, b) ( ( (a) & 1 << (b) ) != 0)
|
2012-09-03 10:12:25 +00:00
|
|
|
#define UI_BITBUT_SET(a, b) ( (a) | 1 << (b) )
|
|
|
|
|
#define UI_BITBUT_CLR(a, b) ( (a) & ~(1 << (b)) )
|
|
|
|
|
/* bit-row */
|
|
|
|
|
#define UI_BITBUT_ROW(min, max) (((max) >= 31 ? 0xFFFFFFFF : (1 << (max + 1)) - 1) - ((min) ? ((1 << (min)) - 1) : 0) )
|
|
|
|
|
|
2013-12-11 21:27:13 +11:00
|
|
|
/* split numbuts by ':' and align l/r */
|
|
|
|
|
#define USE_NUMBUTS_LR_ALIGN
|
|
|
|
|
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
/* PieMenuData->flags */
|
|
|
|
|
enum {
|
|
|
|
|
UI_PIE_DEGREES_RANGE_LARGE = (1 << 0), /* pie menu item collision is detected at 90 degrees */
|
|
|
|
|
UI_PIE_INITIAL_DIRECTION = (1 << 1), /* use initial center of pie menu to calculate direction */
|
2014-08-14 14:17:39 +02:00
|
|
|
UI_PIE_DRAG_STYLE = (1 << 2), /* pie menu is drag style */
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
UI_PIE_INVALID_DIR = (1 << 3), /* mouse not far enough from center position */
|
2014-10-10 19:13:40 +02:00
|
|
|
UI_PIE_CLICK_STYLE = (1 << 4), /* pie menu changed to click style, click to confirm */
|
|
|
|
|
UI_PIE_ANIMATION_FINISHED = (1 << 5), /* pie animation finished, do not calculate any more motion */
|
|
|
|
|
UI_PIE_GESTURE_END_WAIT = (1 << 6), /* pie gesture selection has been done, now wait for mouse motion to end */
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define PIE_CLICK_THRESHOLD_SQ 50.0f
|
|
|
|
|
|
2012-05-08 18:29:02 +00:00
|
|
|
typedef struct uiLinkLine { /* only for draw/edit */
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
struct uiLinkLine *next, *prev;
|
2011-10-03 01:36:25 +00:00
|
|
|
struct uiBut *from, *to;
|
2014-04-16 22:23:29 -03:00
|
|
|
short flag, deactive;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
} uiLinkLine;
|
|
|
|
|
|
|
|
|
|
typedef struct {
|
2012-05-08 18:29:02 +00:00
|
|
|
void **poin; /* pointer to original pointer */
|
|
|
|
|
void ***ppoin; /* pointer to original pointer-array */
|
|
|
|
|
short *totlink; /* if pointer-array, here is the total */
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
short maxlink, pad;
|
|
|
|
|
short fromcode, tocode;
|
|
|
|
|
|
|
|
|
|
ListBase lines;
|
|
|
|
|
} uiLink;
|
|
|
|
|
|
|
|
|
|
struct uiBut {
|
|
|
|
|
struct uiBut *next, *prev;
|
2012-05-23 14:24:40 +00:00
|
|
|
int flag, drawflag;
|
2012-09-11 23:10:23 +00:00
|
|
|
eButType type;
|
|
|
|
|
eButPointerType pointype;
|
* New string property subtype: PASSWORD
When this new subtypes is used, then string of property is hidden using
asterisks, e.g.: mysecretpassword -> ****************
This code was reviewed and modified by Brecht. Thanks very much:
- https://codereview.appspot.com/6713044/
This new subtype of string property is intended mostly for Add-on developers
writing Add-on which communicates with some server (http, sql, ftp, verse,
etc.). When this server requires user authentication and user has to type
username and password, then current API didn't allow to type 'hidden' password,
e.g. when you want to demonstrate this script, then everybody can see this
security password. Some examples of Add-on which could use this new subtype:
- On-line database of textures
- Integration of render farm
- Integration of Verse
Security Notes:
- You can copy paste hiddent string of property from text input using (Ctrl-C, Ctrl-V),
but you can do this in other GUI toolkits too (this behavior it is widely used).
- Text of string property is stored in plain text, but it is widely used in other
GUI toolkits (Qt, Gtk, etc.).
Simple examples:
- https://dl.dropbox.com/u/369894/draw_op_passwd.py
- https://dl.dropbox.com/u/369894/blender-password.png
2012-10-26 12:58:54 +00:00
|
|
|
short bit, bitnr, retval, strwidth, alignnr;
|
|
|
|
|
short ofs, pos, selsta, selend;
|
2011-10-03 01:36:25 +00:00
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
char *str;
|
|
|
|
|
char strdata[UI_MAX_NAME_STR];
|
|
|
|
|
char drawstr[UI_MAX_DRAW_STR];
|
2013-02-26 00:09:26 +00:00
|
|
|
|
|
|
|
|
rctf rect; /* block relative coords */
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
char *poin;
|
UI:
* Added support for soft/hard range in the buttons code. Currently
it works by only allowing to drag or click increment in the soft
range, but typing a number value allows to go outside it.
If the number is outside the soft range, the range will be extended,
rounded to values like:
.., 0.1, 0.2, 0.5, 1.0, 2.0, 5.0, 10.0, 20.0, 50.0, ..
2009-03-29 18:44:49 +00:00
|
|
|
float hardmin, hardmax, softmin, softmax;
|
2012-11-06 04:56:30 +00:00
|
|
|
|
|
|
|
|
/* both these values use depends on the button type
|
|
|
|
|
* (polymorphic struct or union would be nicer for this stuff) */
|
|
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
/* (type == UI_BTYPE_HSVCUBE), Use UI_GRAD_* values.
|
|
|
|
|
* (type == UI_BTYPE_NUM), Use to store RNA 'step' value, for dragging and click-step.
|
|
|
|
|
* (type == UI_BTYPE_LABEL), Use (a1 == 1.0f) to use a2 as a blending factor (wow, this is imaginative!).
|
|
|
|
|
* (type == UI_BTYPE_SCROLL) Use as scroll size.
|
|
|
|
|
* (type == UI_BTYPE_SEARCH_MENU) Use as number or rows.
|
|
|
|
|
* (type == UI_BTYPE_COLOR) Use as indication of color palette
|
2012-11-06 04:56:30 +00:00
|
|
|
*/
|
|
|
|
|
float a1;
|
|
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
/* (type == UI_BTYPE_HSVCIRCLE ), Use to store the luminosity.
|
|
|
|
|
* (type == UI_BTYPE_NUM), Use to store RNA 'precision' value, for dragging and click-step.
|
|
|
|
|
* (type == UI_BTYPE_LABEL), If (a1 == 1.0f) use a2 as a blending factor.
|
|
|
|
|
* (type == UI_BTYPE_SEARCH_MENU) Use as number or columns.
|
|
|
|
|
* (type == UI_BTYPE_COLOR) Use as index in palette (not so good, needs refactor)
|
2012-11-06 04:56:30 +00:00
|
|
|
*/
|
|
|
|
|
float a2;
|
|
|
|
|
|
2012-01-19 10:04:51 +00:00
|
|
|
unsigned char col[4];
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
uiButHandleFunc func;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
void *func_arg1;
|
|
|
|
|
void *func_arg2;
|
2008-12-10 19:22:10 +00:00
|
|
|
|
2.5: ID datablock button back, previously known as std_libbuttons. The
way this worked in 2.4x wasn't really clean, with events going all over
the place and using dubious variables such as G.but->lockpoin or
G.sima->menunr. It works as follows now, for example:
xco= uiDefIDPoinButs(block, CTX_data_main(C), NULL, (ID**)&sima->image, ID_IM, &sima->pin, xco, yco,
sima_idpoin_handle, UI_ID_BROWSE|UI_ID_RENAME|UI_ID_ADD_NEW|UI_ID_OPEN|UI_ID_DELETE|UI_ID_ALONE|UI_ID_PIN);
The last two parameters are a callback function, and a list of events
or functionalities that are supported. The callback function will then
get the ID pointer + event to handle.
2009-02-06 16:40:14 +00:00
|
|
|
uiButHandleNFunc funcN;
|
|
|
|
|
void *func_argN;
|
|
|
|
|
|
2009-05-28 23:13:42 +00:00
|
|
|
struct bContextStore *context;
|
|
|
|
|
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
uiButCompleteFunc autocomplete_func;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
void *autofunc_arg;
|
|
|
|
|
|
2009-06-02 18:10:06 +00:00
|
|
|
uiButSearchFunc search_func;
|
|
|
|
|
void *search_arg;
|
2009-07-25 13:40:59 +00:00
|
|
|
|
|
|
|
|
uiButHandleRenameFunc rename_func;
|
|
|
|
|
void *rename_arg1;
|
|
|
|
|
void *rename_orig;
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
uiLink *link;
|
2013-02-26 00:09:26 +00:00
|
|
|
short linkto[2]; /* region relative coords */
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2015-02-11 00:06:03 +01:00
|
|
|
const char *tip;
|
|
|
|
|
uiButToolTipFunc tip_func;
|
|
|
|
|
void *tip_argN;
|
|
|
|
|
|
|
|
|
|
const char *lockstr;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
BIFIconID icon;
|
2014-01-04 17:16:19 +11:00
|
|
|
bool lock;
|
2014-11-09 21:20:40 +01:00
|
|
|
char dt; /* drawtype: UI_EMBOSS, UI_EMBOSS_NONE ... etc, copied from the block */
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
signed char pie_dir; /* direction in a pie menu, used for collision detection (RadialDirection) */
|
2010-12-10 04:10:21 +00:00
|
|
|
char changed; /* could be made into a single flag */
|
|
|
|
|
unsigned char unit_type; /* so buttons can support unit systems which are not RNA */
|
2009-12-24 09:26:06 +00:00
|
|
|
short modifier_key;
|
2010-10-07 00:14:21 +00:00
|
|
|
short iconadd;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
/* UI_BTYPE_BLOCK data */
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
uiBlockCreateFunc block_create_func;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
/* UI_BTYPE_PULLDOWN/UI_BTYPE_MENU data */
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
uiMenuCreateFunc menu_create_func;
|
|
|
|
|
|
|
|
|
|
/* RNA data */
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
struct PointerRNA rnapoin;
|
|
|
|
|
struct PropertyRNA *rnaprop;
|
|
|
|
|
int rnaindex;
|
|
|
|
|
|
2009-06-27 01:15:31 +00:00
|
|
|
struct PointerRNA rnasearchpoin;
|
|
|
|
|
struct PropertyRNA *rnasearchprop;
|
|
|
|
|
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
/* Operator data */
|
UI: Layout Engine
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
2009-05-15 11:19:59 +00:00
|
|
|
struct wmOperatorType *optype;
|
2008-12-16 20:03:28 +00:00
|
|
|
struct PointerRNA *opptr;
|
2010-07-04 20:59:10 +00:00
|
|
|
short opcontext;
|
2010-12-14 02:38:29 +00:00
|
|
|
unsigned char menu_key; /* 'a'-'z', always lower case */
|
|
|
|
|
|
Drag and drop 2.5 integration! Finally, slashdot regulars can use
Blender too now! :)
** Drag works as follows:
- drag-able items are defined by the standard interface ui toolkit
- each button can get this feature, via uiButSetDragXXX(but, ...).
There are calls to define drag-able images, ID blocks, RNA paths,
file paths, and so on. By default you drag an icon, exceptionally
an ImBuf
- Drag items are registered centrally in the WM, it allows more drag
items simultaneous too, but not implemented
** Drop works as follows:
- On mouse release, and if drag items exist in the WM, it converts
the mouse event to an EVT_DROP type. This event then gets the full
drag info as customdata
- drop regions are defined with WM_dropbox_add(), similar to keymaps
you can make a "drop map" this way, which become 'drop map handlers'
in the queues.
- next to that the UI kit handles some common button types (like
accepting ID or names) to be catching a drop event too.
- Every "drop box" has two callbacks:
- poll() = check if the event drag data is relevant for this box
- copy() = fill in custom properties in the dropbox to initialize
an operator
- The dropbox handler then calls its standard Operator with its
dropbox properties.
** Currently implemented
Drag items:
- ID icons in browse buttons
- ID icons in context menu of properties region
- ID icons in outliner and rna viewer
- FileBrowser icons
- FileBrowser preview images
Drag-able icons are subtly visualized by making them brighter a bit
on mouse-over. In case the icon is a button or UI element too (most
cases), the drag-able feature will make the item react to
mouse-release instead of mouse-press.
Drop options:
- UI buttons: ID and text buttons (paste name)
- View3d: Object ID drop copies object
- View3d: Material ID drop assigns to object under cursor
- View3d: Image ID drop assigns to object UV texture under cursor
- Sequencer: Path drop will add either Image or Movie strip
- Image window: Path drop will open image
** Drag and drop Notes:
- Dropping into another Blender window (from same application) works
too. I've added code that passes on mousemoves and clicks to other
windows, without activating them though. This does make using multi-window
Blender a bit friendler.
- Dropping a file path to an image, is not the same as dropping an
Image ID... keep this in mind. Sequencer for example wants paths to
be dropped, textures in 3d window wants an Image ID.
- Although drop boxes could be defined via Python, I suggest they're
part of the UI and editor design (= how we want an editor to work), and
not default offered configurable like keymaps.
- At the moment only one item can be dragged at a time. This is for
several reasons.... For one, Blender doesn't have a well defined
uniform way to define "what is selected" (files, outliner items, etc).
Secondly there's potential conflicts on what todo when you drop mixed
drag sets on spots. All undefined stuff... nice for later.
- Example to bypass the above: a collection of images that form a strip,
should be represented in filewindow as a single sequence anyway.
This then will fit well and gets handled neatly by design.
- Another option to check is to allow multiple options per drop... it
could show the operator as a sort of menu, allowing arrow or scrollwheel
to choose. For time being I'd prefer to try to design a singular drop
though, just offer only one drop action per data type on given spots.
- What does work already, but a tad slow, is to use a function that
detects an object (type) under cursor, so a drag item's option can be
further refined (like drop object on object = parent). (disabled)
** More notes
- Added saving for Region layouts (like split points for toolbar)
- Label buttons now handle mouse over
- File list: added full path entry for drop feature.
- Filesel bugfix: wm_operator_exec() got called there and fully handled,
while WM event code tried same. Added new OPERATOR_HANDLED flag for this.
Maybe python needs it too?
- Cocoa: added window move event, so multi-win setups work OK (didnt save).
- Interface_handlers.c: removed win->active
- Severe area copy bug: area handlers were not set to NULL
- Filesel bugfix: next/prev folder list was not copied on area copies
** Leftover todos
- Cocoa windows seem to hang on cases still... needs check
- Cocoa 'draw overlap' swap doesn't work
- Cocoa window loses focus permanently on using Spotlight
(for these reasons, makefile building has Carbon as default atm)
- ListView templates in UI cannot become dragged yet, needs review...
it consists of two overlapping UI elements, preventing handling icon clicks.
- There's already Ghost library code to handle dropping from OS
into Blender window. I've noticed this code is unfinished for Macs, but
seems to be complete for Windows. Needs test... currently, an external
drop event will print in console when succesfully delivered to Blender's WM.
2010-01-26 18:18:21 +00:00
|
|
|
/* Draggable data, type is WM_DRAG_... */
|
2010-12-14 02:38:29 +00:00
|
|
|
char dragtype;
|
Drag and drop 2.5 integration! Finally, slashdot regulars can use
Blender too now! :)
** Drag works as follows:
- drag-able items are defined by the standard interface ui toolkit
- each button can get this feature, via uiButSetDragXXX(but, ...).
There are calls to define drag-able images, ID blocks, RNA paths,
file paths, and so on. By default you drag an icon, exceptionally
an ImBuf
- Drag items are registered centrally in the WM, it allows more drag
items simultaneous too, but not implemented
** Drop works as follows:
- On mouse release, and if drag items exist in the WM, it converts
the mouse event to an EVT_DROP type. This event then gets the full
drag info as customdata
- drop regions are defined with WM_dropbox_add(), similar to keymaps
you can make a "drop map" this way, which become 'drop map handlers'
in the queues.
- next to that the UI kit handles some common button types (like
accepting ID or names) to be catching a drop event too.
- Every "drop box" has two callbacks:
- poll() = check if the event drag data is relevant for this box
- copy() = fill in custom properties in the dropbox to initialize
an operator
- The dropbox handler then calls its standard Operator with its
dropbox properties.
** Currently implemented
Drag items:
- ID icons in browse buttons
- ID icons in context menu of properties region
- ID icons in outliner and rna viewer
- FileBrowser icons
- FileBrowser preview images
Drag-able icons are subtly visualized by making them brighter a bit
on mouse-over. In case the icon is a button or UI element too (most
cases), the drag-able feature will make the item react to
mouse-release instead of mouse-press.
Drop options:
- UI buttons: ID and text buttons (paste name)
- View3d: Object ID drop copies object
- View3d: Material ID drop assigns to object under cursor
- View3d: Image ID drop assigns to object UV texture under cursor
- Sequencer: Path drop will add either Image or Movie strip
- Image window: Path drop will open image
** Drag and drop Notes:
- Dropping into another Blender window (from same application) works
too. I've added code that passes on mousemoves and clicks to other
windows, without activating them though. This does make using multi-window
Blender a bit friendler.
- Dropping a file path to an image, is not the same as dropping an
Image ID... keep this in mind. Sequencer for example wants paths to
be dropped, textures in 3d window wants an Image ID.
- Although drop boxes could be defined via Python, I suggest they're
part of the UI and editor design (= how we want an editor to work), and
not default offered configurable like keymaps.
- At the moment only one item can be dragged at a time. This is for
several reasons.... For one, Blender doesn't have a well defined
uniform way to define "what is selected" (files, outliner items, etc).
Secondly there's potential conflicts on what todo when you drop mixed
drag sets on spots. All undefined stuff... nice for later.
- Example to bypass the above: a collection of images that form a strip,
should be represented in filewindow as a single sequence anyway.
This then will fit well and gets handled neatly by design.
- Another option to check is to allow multiple options per drop... it
could show the operator as a sort of menu, allowing arrow or scrollwheel
to choose. For time being I'd prefer to try to design a singular drop
though, just offer only one drop action per data type on given spots.
- What does work already, but a tad slow, is to use a function that
detects an object (type) under cursor, so a drag item's option can be
further refined (like drop object on object = parent). (disabled)
** More notes
- Added saving for Region layouts (like split points for toolbar)
- Label buttons now handle mouse over
- File list: added full path entry for drop feature.
- Filesel bugfix: wm_operator_exec() got called there and fully handled,
while WM event code tried same. Added new OPERATOR_HANDLED flag for this.
Maybe python needs it too?
- Cocoa: added window move event, so multi-win setups work OK (didnt save).
- Interface_handlers.c: removed win->active
- Severe area copy bug: area handlers were not set to NULL
- Filesel bugfix: next/prev folder list was not copied on area copies
** Leftover todos
- Cocoa windows seem to hang on cases still... needs check
- Cocoa 'draw overlap' swap doesn't work
- Cocoa window loses focus permanently on using Spotlight
(for these reasons, makefile building has Carbon as default atm)
- ListView templates in UI cannot become dragged yet, needs review...
it consists of two overlapping UI elements, preventing handling icon clicks.
- There's already Ghost library code to handle dropping from OS
into Blender window. I've noticed this code is unfinished for Macs, but
seems to be complete for Windows. Needs test... currently, an external
drop event will print in console when succesfully delivered to Blender's WM.
2010-01-26 18:18:21 +00:00
|
|
|
void *dragpoin;
|
|
|
|
|
struct ImBuf *imb;
|
|
|
|
|
float imb_scale;
|
Holiday coding log :)
Nice formatted version (pictures soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.66/Usability
Short list of main changes:
- Transparent region option (over main region), added code to blend in/out such panels.
- Min size window now 640 x 480
- Fixed DPI for ui - lots of cleanup and changes everywhere. Icon image need correct size still, layer-in-use icon needs remake.
- Macbook retina support, use command line --no-native-pixels to disable it
- Timeline Marker label was drawing wrong
- Trackpad and magic mouse: supports zoom (hold ctrl)
- Fix for splash position: removed ghost function and made window size update after creation immediate
- Fast undo buffer save now adds UI as well. Could be checked for regular file save even...
Quit.blend and temp file saving use this now.
- Dixed filename in window on reading quit.blend or temp saves, and they now add a warning in window title: "(Recovered)"
- New Userpref option "Keep Session" - this always saves quit.blend, and loads on start.
This allows keeping UI and data without actual saves, until you actually save.
When you load startup.blend and quit, it recognises the quit.blend as a startup (no file name in header)
- Added 3D view copy/paste buffers (selected objects). Shortcuts ctrl-c, ctrl-v (OSX, cmd-c, cmd-v).
Coded partial file saving for it. Could be used for other purposes. Todo: use OS clipboards.
- User preferences (themes, keymaps, user settings) now can be saved as a separate file.
Old option is called "Save Startup File" the new one "Save User Settings".
To visualise this difference, the 'save startup file' button has been removed from user preferences window. That option is available as CTRL+U and in File menu still.
- OSX: fixed bug that stopped giving mouse events outside window.
This also fixes "Continuous Grab" for OSX. (error since 2009)
2012-12-12 18:58:11 +00:00
|
|
|
|
Drag and drop 2.5 integration! Finally, slashdot regulars can use
Blender too now! :)
** Drag works as follows:
- drag-able items are defined by the standard interface ui toolkit
- each button can get this feature, via uiButSetDragXXX(but, ...).
There are calls to define drag-able images, ID blocks, RNA paths,
file paths, and so on. By default you drag an icon, exceptionally
an ImBuf
- Drag items are registered centrally in the WM, it allows more drag
items simultaneous too, but not implemented
** Drop works as follows:
- On mouse release, and if drag items exist in the WM, it converts
the mouse event to an EVT_DROP type. This event then gets the full
drag info as customdata
- drop regions are defined with WM_dropbox_add(), similar to keymaps
you can make a "drop map" this way, which become 'drop map handlers'
in the queues.
- next to that the UI kit handles some common button types (like
accepting ID or names) to be catching a drop event too.
- Every "drop box" has two callbacks:
- poll() = check if the event drag data is relevant for this box
- copy() = fill in custom properties in the dropbox to initialize
an operator
- The dropbox handler then calls its standard Operator with its
dropbox properties.
** Currently implemented
Drag items:
- ID icons in browse buttons
- ID icons in context menu of properties region
- ID icons in outliner and rna viewer
- FileBrowser icons
- FileBrowser preview images
Drag-able icons are subtly visualized by making them brighter a bit
on mouse-over. In case the icon is a button or UI element too (most
cases), the drag-able feature will make the item react to
mouse-release instead of mouse-press.
Drop options:
- UI buttons: ID and text buttons (paste name)
- View3d: Object ID drop copies object
- View3d: Material ID drop assigns to object under cursor
- View3d: Image ID drop assigns to object UV texture under cursor
- Sequencer: Path drop will add either Image or Movie strip
- Image window: Path drop will open image
** Drag and drop Notes:
- Dropping into another Blender window (from same application) works
too. I've added code that passes on mousemoves and clicks to other
windows, without activating them though. This does make using multi-window
Blender a bit friendler.
- Dropping a file path to an image, is not the same as dropping an
Image ID... keep this in mind. Sequencer for example wants paths to
be dropped, textures in 3d window wants an Image ID.
- Although drop boxes could be defined via Python, I suggest they're
part of the UI and editor design (= how we want an editor to work), and
not default offered configurable like keymaps.
- At the moment only one item can be dragged at a time. This is for
several reasons.... For one, Blender doesn't have a well defined
uniform way to define "what is selected" (files, outliner items, etc).
Secondly there's potential conflicts on what todo when you drop mixed
drag sets on spots. All undefined stuff... nice for later.
- Example to bypass the above: a collection of images that form a strip,
should be represented in filewindow as a single sequence anyway.
This then will fit well and gets handled neatly by design.
- Another option to check is to allow multiple options per drop... it
could show the operator as a sort of menu, allowing arrow or scrollwheel
to choose. For time being I'd prefer to try to design a singular drop
though, just offer only one drop action per data type on given spots.
- What does work already, but a tad slow, is to use a function that
detects an object (type) under cursor, so a drag item's option can be
further refined (like drop object on object = parent). (disabled)
** More notes
- Added saving for Region layouts (like split points for toolbar)
- Label buttons now handle mouse over
- File list: added full path entry for drop feature.
- Filesel bugfix: wm_operator_exec() got called there and fully handled,
while WM event code tried same. Added new OPERATOR_HANDLED flag for this.
Maybe python needs it too?
- Cocoa: added window move event, so multi-win setups work OK (didnt save).
- Interface_handlers.c: removed win->active
- Severe area copy bug: area handlers were not set to NULL
- Filesel bugfix: next/prev folder list was not copied on area copies
** Leftover todos
- Cocoa windows seem to hang on cases still... needs check
- Cocoa 'draw overlap' swap doesn't work
- Cocoa window loses focus permanently on using Spotlight
(for these reasons, makefile building has Carbon as default atm)
- ListView templates in UI cannot become dragged yet, needs review...
it consists of two overlapping UI elements, preventing handling icon clicks.
- There's already Ghost library code to handle dropping from OS
into Blender window. I've noticed this code is unfinished for Macs, but
seems to be complete for Windows. Needs test... currently, an external
drop event will print in console when succesfully delivered to Blender's WM.
2010-01-26 18:18:21 +00:00
|
|
|
/* active button data */
|
UI: don't use operators anymore for handling user interface events, but rather
a special UI handler which makes the code clearer. This UI handler is attached
to the region along with other handlers, and also gets a callback when all
handlers for the region are removed to ensure things are properly cleaned up.
This should fix XXX's in the UI code related to events and context switching.
Most of the changes are in interface_handlers.c, which was renamed from
interface_ops.c, to convert operators to the UI handler. UI code notes:
* uiBeginBlock/uiEndBlock/uiFreeBlocks now takes a context argument, this is
required to properly cancel things like timers or tooltips when the region
gets removed.
* UI_add_region_handlers will add the region level UI handlers, to be used
when adding keymap handlers etc. This replaces the UI keymap.
* When the UI code starts a modal interaction (number sliding, text editing,
opening a menu, ..), it will add an UI handler at the window level which
will block events.
Windowmanager changes:
* Added an UI handler next to the existing keymap and operator modal handlers.
It has an event handling and remove callback, and like operator modal handlers
will remember the area and region if it is registered at the window level.
* Removed the MESSAGE event.
* Operator cancel and UI handler remove callbacks now get the
window/area/region restored in the context, like the operator modal and UI
handler event callbacks.
* Regions now receive MOUSEMOVE events for the mouse going outside of the
region. This was already happening for areas, but UI buttons are at the region
level so we need it there.
Issues:
* Tooltips and menus stay open when switching to another window, and button
highlight doesn't work without moving the mouse first when Blender starts up.
I tried using some events like Q_FIRSTTIME, WINTHAW, but those don't seem to
arrive..
* Timeline header buttons seem to be moving one pixel or so sometimes when
interacting with them.
* Seems not due to this commit, but UI and keymap handlers are leaking. It
seems that handlers are being added to regions in all screens, also in regions
of areas that are not visible, but these handlers are not removed. Probably
there should only be handlers in visible regions?
2008-12-10 04:36:33 +00:00
|
|
|
struct uiHandleButtonData *active;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
This commit frees list ui items from their dependencies to Panel, and hence from all the limitations this implied (mostly, the "only one list per panel" one).
It introduces a new (py-extendable and registrable) RNA type, UIList (roughly similar to Panel one), which currently contains only "standard" list's scroll pos and size (but may be expended to include e.g. some filtering data, etc.). This now makes lists completely independent from Panels!
This UIList has a draw_item callback which allows to customize items' drawing from python, that all addons can now use. Incidentally, this also greatly simplifies the C code of this widget, as we do not code any "special case" here anymore!
To make all this work, other changes were also necessary:
* Now all buttons (uiBut struct) have a 'custom_data' void pointer, used currently to store the uiList struct associated with a given uiLayoutListBox.
* DynamicPaintSurface now exposes a new bool, use_color_preview (readonly), saying whether that surface has some 3D view preview data or not.
* UILayout class has now four new (static) functions, to get the actual icon of any RNA object (important e.g. with materials or textures), and to get an enum item's UI name, description and icon.
* UILayout's label() func now takes an optional 'icon_value' integer parameter, which if not zero will override the 'icon' one (mandatory to use "custom" icons as generated for material/texture/... previews).
Note: not sure whether we should add that one to all UILayout's prop funcs?
Note: will update addons using template list asap.
2012-12-28 09:20:16 +00:00
|
|
|
/* Custom button data. */
|
|
|
|
|
void *custom_data;
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
char *editstr;
|
|
|
|
|
double *editval;
|
|
|
|
|
float *editvec;
|
|
|
|
|
void *editcoba;
|
|
|
|
|
void *editcumap;
|
|
|
|
|
|
2012-05-08 18:29:02 +00:00
|
|
|
/* pointer back */
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
uiBlock *block;
|
|
|
|
|
};
|
|
|
|
|
|
2014-11-06 20:19:21 +01:00
|
|
|
typedef struct ColorPicker {
|
|
|
|
|
struct ColorPicker *next, *prev;
|
|
|
|
|
float color_data[3]; /* colr data may be HSV or HSL for now */
|
|
|
|
|
int representation; /* store hsv/hsl value */
|
|
|
|
|
} ColorPicker;
|
|
|
|
|
|
|
|
|
|
typedef struct ColorPickerData {
|
|
|
|
|
ListBase list;
|
|
|
|
|
} ColorPickerData;
|
|
|
|
|
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
struct PieMenuData {
|
|
|
|
|
float pie_dir[2];
|
|
|
|
|
float pie_center_init[2];
|
|
|
|
|
float pie_center_spawned[2];
|
2014-10-10 19:13:40 +02:00
|
|
|
float last_pos[2];
|
|
|
|
|
double duration_gesture;
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
int flags;
|
|
|
|
|
int event; /* initial event used to fire the pie menu, store here so we can query for release */
|
|
|
|
|
float alphafac;
|
|
|
|
|
};
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
struct uiBlock {
|
|
|
|
|
uiBlock *next, *prev;
|
UI: Layout Engine
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
2009-05-15 11:19:59 +00:00
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
ListBase buttons;
|
|
|
|
|
Panel *panel;
|
|
|
|
|
uiBlock *oldblock;
|
UI: Layout Engine
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
2009-05-15 11:19:59 +00:00
|
|
|
|
2014-02-08 09:03:25 +11:00
|
|
|
ListBase butstore; /* UI_butstore_* runtime function */
|
|
|
|
|
|
2009-05-19 17:13:33 +00:00
|
|
|
ListBase layouts;
|
UI: Layout Engine
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
2009-05-15 11:19:59 +00:00
|
|
|
struct uiLayout *curlayout;
|
2009-05-28 23:13:42 +00:00
|
|
|
|
|
|
|
|
ListBase contexts;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
char name[UI_MAX_NAME_STR];
|
|
|
|
|
|
|
|
|
|
float winmat[4][4];
|
2012-08-18 16:53:46 +00:00
|
|
|
|
|
|
|
|
rctf rect;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
float aspect;
|
|
|
|
|
|
2014-02-13 09:36:54 +11:00
|
|
|
unsigned int puphash; /* popup menu hash for memory */
|
UI: Layout Engine
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
2009-05-15 11:19:59 +00:00
|
|
|
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
uiButHandleFunc func;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
void *func_arg1;
|
|
|
|
|
void *func_arg2;
|
2008-12-10 19:22:10 +00:00
|
|
|
|
2009-09-16 18:47:42 +00:00
|
|
|
uiButHandleNFunc funcN;
|
|
|
|
|
void *func_argN;
|
|
|
|
|
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
uiMenuHandleFunc butm_func;
|
2008-12-10 19:22:10 +00:00
|
|
|
void *butm_func_arg;
|
|
|
|
|
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
uiBlockHandleFunc handle_func;
|
2008-12-10 19:22:10 +00:00
|
|
|
void *handle_func_arg;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2009-06-12 14:22:27 +00:00
|
|
|
/* custom extra handling */
|
2013-02-01 01:01:20 +00:00
|
|
|
int (*block_event_func)(const struct bContext *C, struct uiBlock *, const struct wmEvent *);
|
2009-06-12 14:22:27 +00:00
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
/* extra draw function for custom blocks */
|
2009-08-18 19:58:27 +00:00
|
|
|
void (*drawextra)(const struct bContext *C, void *idv, void *arg1, void *arg2, rcti *rect);
|
|
|
|
|
void *drawextra_arg1;
|
|
|
|
|
void *drawextra_arg2;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2010-10-07 00:14:21 +00:00
|
|
|
int flag;
|
2011-10-03 01:36:25 +00:00
|
|
|
short alignnr;
|
|
|
|
|
|
2011-08-14 11:38:17 +00:00
|
|
|
char direction;
|
2014-11-09 21:20:40 +01:00
|
|
|
char dt; /* drawtype: UI_EMBOSS, UI_EMBOSS_NONE ... etc, copied to buttons */
|
2014-01-04 17:16:19 +11:00
|
|
|
bool auto_open;
|
2012-09-22 07:22:42 +00:00
|
|
|
char _pad[7];
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
double auto_open_last;
|
|
|
|
|
|
2010-12-03 17:05:21 +00:00
|
|
|
const char *lockstr;
|
2010-10-14 11:33:51 +00:00
|
|
|
|
|
|
|
|
char lock;
|
2012-08-25 20:49:51 +00:00
|
|
|
char active; /* to keep blocks while drawing and free them afterwards */
|
|
|
|
|
char tooltipdisabled; /* to avoid tooltip after click */
|
2014-11-09 21:20:40 +01:00
|
|
|
char endblock; /* UI_block_end done? */
|
2012-08-25 20:49:51 +00:00
|
|
|
|
2012-09-10 07:03:30 +00:00
|
|
|
eBlockBoundsCalc bounds_type; /* for doing delayed */
|
|
|
|
|
int mx, my;
|
2012-08-25 20:49:51 +00:00
|
|
|
int bounds, minbounds; /* for doing delayed */
|
UI: don't use operators anymore for handling user interface events, but rather
a special UI handler which makes the code clearer. This UI handler is attached
to the region along with other handlers, and also gets a callback when all
handlers for the region are removed to ensure things are properly cleaned up.
This should fix XXX's in the UI code related to events and context switching.
Most of the changes are in interface_handlers.c, which was renamed from
interface_ops.c, to convert operators to the UI handler. UI code notes:
* uiBeginBlock/uiEndBlock/uiFreeBlocks now takes a context argument, this is
required to properly cancel things like timers or tooltips when the region
gets removed.
* UI_add_region_handlers will add the region level UI handlers, to be used
when adding keymap handlers etc. This replaces the UI keymap.
* When the UI code starts a modal interaction (number sliding, text editing,
opening a menu, ..), it will add an UI handler at the window level which
will block events.
Windowmanager changes:
* Added an UI handler next to the existing keymap and operator modal handlers.
It has an event handling and remove callback, and like operator modal handlers
will remember the area and region if it is registered at the window level.
* Removed the MESSAGE event.
* Operator cancel and UI handler remove callbacks now get the
window/area/region restored in the context, like the operator modal and UI
handler event callbacks.
* Regions now receive MOUSEMOVE events for the mouse going outside of the
region. This was already happening for areas, but UI buttons are at the region
level so we need it there.
Issues:
* Tooltips and menus stay open when switching to another window, and button
highlight doesn't work without moving the mouse first when Blender starts up.
I tried using some events like Q_FIRSTTIME, WINTHAW, but those don't seem to
arrive..
* Timeline header buttons seem to be moving one pixel or so sometimes when
interacting with them.
* Seems not due to this commit, but UI and keymap handlers are leaking. It
seems that handlers are being added to regions in all screens, also in regions
of areas that are not visible, but these handlers are not removed. Probably
there should only be handlers in visible regions?
2008-12-10 04:36:33 +00:00
|
|
|
|
2012-08-25 20:49:51 +00:00
|
|
|
rctf safety; /* pulldowns, to detect outside, can differ per case how it is created */
|
|
|
|
|
ListBase saferct; /* uiSafetyRct list */
|
UI: don't use operators anymore for handling user interface events, but rather
a special UI handler which makes the code clearer. This UI handler is attached
to the region along with other handlers, and also gets a callback when all
handlers for the region are removed to ensure things are properly cleaned up.
This should fix XXX's in the UI code related to events and context switching.
Most of the changes are in interface_handlers.c, which was renamed from
interface_ops.c, to convert operators to the UI handler. UI code notes:
* uiBeginBlock/uiEndBlock/uiFreeBlocks now takes a context argument, this is
required to properly cancel things like timers or tooltips when the region
gets removed.
* UI_add_region_handlers will add the region level UI handlers, to be used
when adding keymap handlers etc. This replaces the UI keymap.
* When the UI code starts a modal interaction (number sliding, text editing,
opening a menu, ..), it will add an UI handler at the window level which
will block events.
Windowmanager changes:
* Added an UI handler next to the existing keymap and operator modal handlers.
It has an event handling and remove callback, and like operator modal handlers
will remember the area and region if it is registered at the window level.
* Removed the MESSAGE event.
* Operator cancel and UI handler remove callbacks now get the
window/area/region restored in the context, like the operator modal and UI
handler event callbacks.
* Regions now receive MOUSEMOVE events for the mouse going outside of the
region. This was already happening for areas, but UI buttons are at the region
level so we need it there.
Issues:
* Tooltips and menus stay open when switching to another window, and button
highlight doesn't work without moving the mouse first when Blender starts up.
I tried using some events like Q_FIRSTTIME, WINTHAW, but those don't seem to
arrive..
* Timeline header buttons seem to be moving one pixel or so sometimes when
interacting with them.
* Seems not due to this commit, but UI and keymap handlers are leaking. It
seems that handlers are being added to regions in all screens, also in regions
of areas that are not visible, but these handlers are not removed. Probably
there should only be handlers in visible regions?
2008-12-10 04:36:33 +00:00
|
|
|
|
2012-08-25 20:49:51 +00:00
|
|
|
uiPopupBlockHandle *handle; /* handle */
|
2011-11-10 03:44:50 +00:00
|
|
|
|
2012-08-25 20:49:51 +00:00
|
|
|
struct wmOperator *ui_operator; /* use so presets can find the operator, */
|
|
|
|
|
/* across menus and from nested popups which fail for operator context. */
|
2011-11-10 03:44:50 +00:00
|
|
|
|
2012-08-25 20:49:51 +00:00
|
|
|
void *evil_C; /* XXX hack for dynamic operator enums */
|
2010-10-14 11:33:51 +00:00
|
|
|
|
2012-08-25 20:49:51 +00:00
|
|
|
struct UnitSettings *unit; /* unit system, used a lot for numeric buttons so include here rather then fetching through the scene every time. */
|
2014-11-06 20:19:21 +01:00
|
|
|
ColorPickerData color_pickers; /* XXX, only accessed by color picker templates */
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 10:05:07 +00:00
|
|
|
|
2014-01-04 17:16:19 +11:00
|
|
|
bool color_profile; /* color profile for correcting linear colors for display */
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 10:05:07 +00:00
|
|
|
|
2014-02-06 18:02:31 +01:00
|
|
|
char display_device[64]; /* display device name used to display this block,
|
|
|
|
|
* used by color widgets to transform colors from/to scene linear
|
|
|
|
|
*/
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
struct PieMenuData pie_data;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
typedef struct uiSafetyRct {
|
|
|
|
|
struct uiSafetyRct *next, *prev;
|
|
|
|
|
rctf parent;
|
|
|
|
|
rctf safety;
|
|
|
|
|
} uiSafetyRct;
|
|
|
|
|
|
|
|
|
|
/* interface.c */
|
|
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
extern void ui_linkline_remove(uiLinkLine *line, uiBut *but);
|
2010-01-19 11:24:42 +00:00
|
|
|
|
2009-04-15 14:43:54 +00:00
|
|
|
void ui_fontscale(short *points, float aspect);
|
|
|
|
|
|
2014-01-20 11:13:53 +11:00
|
|
|
extern bool ui_block_is_menu(const uiBlock *block) ATTR_WARN_UNUSED_RESULT;
|
2014-08-14 13:18:07 +02:00
|
|
|
extern bool ui_block_is_pie_menu(const uiBlock *block) ATTR_WARN_UNUSED_RESULT;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
extern void ui_block_to_window_fl(const struct ARegion *ar, uiBlock *block, float *x, float *y);
|
|
|
|
|
extern void ui_block_to_window(const struct ARegion *ar, uiBlock *block, int *x, int *y);
|
2013-06-13 09:12:53 +00:00
|
|
|
extern void ui_block_to_window_rctf(const struct ARegion *ar, uiBlock *block, rctf *rct_dst, const rctf *rct_src);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
extern void ui_window_to_block_fl(const struct ARegion *ar, uiBlock *block, float *x, float *y);
|
|
|
|
|
extern void ui_window_to_block(const struct ARegion *ar, uiBlock *block, int *x, int *y);
|
2008-12-03 20:57:23 +00:00
|
|
|
extern void ui_window_to_region(const ARegion *ar, int *x, int *y);
|
2014-12-07 00:58:17 +01:00
|
|
|
extern void ui_region_to_window(const struct ARegion *ar, int *x, int *y);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
extern double ui_but_value_get(uiBut *but);
|
|
|
|
|
extern void ui_but_value_set(uiBut *but, double value);
|
|
|
|
|
extern void ui_but_hsv_set(uiBut *but);
|
|
|
|
|
extern void ui_but_v3_get(uiBut *but, float vec[3]);
|
|
|
|
|
extern void ui_but_v3_set(uiBut *but, const float vec[3]);
|
2009-03-30 17:31:37 +00:00
|
|
|
|
2012-10-04 09:33:14 +00:00
|
|
|
extern void ui_hsvcircle_vals_from_pos(float *val_rad, float *val_dist, const rcti *rect,
|
|
|
|
|
const float mx, const float my);
|
2013-04-27 12:54:45 +00:00
|
|
|
extern void ui_hsvcircle_pos_from_vals(struct uiBut *but, const rcti *rect, float *hsv, float *xpos, float *ypos);
|
|
|
|
|
extern void ui_hsvcube_pos_from_vals(struct uiBut *but, const rcti *rect, float *hsv, float *xp, float *yp);
|
2014-11-09 21:20:40 +01:00
|
|
|
bool ui_but_is_colorpicker_display_space(struct uiBut *but);
|
2009-06-12 14:22:27 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
extern void ui_but_string_get_ex(uiBut *but, char *str, const size_t maxlen, const int float_precision) ATTR_NONNULL();
|
|
|
|
|
extern void ui_but_string_get(uiBut *but, char *str, const size_t maxlen) ATTR_NONNULL();
|
|
|
|
|
extern void ui_but_convert_to_unit_alt_name(uiBut *but, char *str, size_t maxlen) ATTR_NONNULL();
|
|
|
|
|
extern bool ui_but_string_set(struct bContext *C, uiBut *but, const char *str) ATTR_NONNULL();
|
|
|
|
|
extern bool ui_but_string_set_eval_num(struct bContext *C, uiBut *but, const char *str, double *value) ATTR_NONNULL();
|
|
|
|
|
extern int ui_but_string_get_max_length(uiBut *but);
|
|
|
|
|
extern uiBut *ui_but_drag_multi_edit_get(uiBut *but);
|
2015-04-21 14:24:13 +10:00
|
|
|
extern uiButExtraIconType ui_but_icon_extra_get(uiBut *but);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
extern void ui_but_default_set(struct bContext *C, const bool all, const bool use_afterfunc);
|
2010-01-20 04:19:55 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
extern void ui_but_update(uiBut *but);
|
|
|
|
|
extern bool ui_but_is_float(const uiBut *but) ATTR_WARN_UNUSED_RESULT;
|
|
|
|
|
extern bool ui_but_is_bool(const uiBut *but) ATTR_WARN_UNUSED_RESULT;
|
|
|
|
|
extern bool ui_but_is_unit(const uiBut *but) ATTR_WARN_UNUSED_RESULT;
|
|
|
|
|
extern bool ui_but_is_compatible(const uiBut *but_a, const uiBut *but_b) ATTR_WARN_UNUSED_RESULT;
|
|
|
|
|
extern bool ui_but_is_rna_valid(uiBut *but) ATTR_WARN_UNUSED_RESULT;
|
|
|
|
|
extern bool ui_but_is_utf8(const uiBut *but) ATTR_WARN_UNUSED_RESULT;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
extern int ui_but_is_pushed_ex(uiBut *but, double *value) ATTR_WARN_UNUSED_RESULT;
|
|
|
|
|
extern int ui_but_is_pushed(uiBut *but) ATTR_WARN_UNUSED_RESULT;
|
2013-03-01 00:19:32 +00:00
|
|
|
|
|
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
extern void ui_block_bounds_calc(uiBlock *block);
|
2009-04-11 01:52:27 +00:00
|
|
|
extern void ui_block_translate(uiBlock *block, int x, int y);
|
2014-11-09 21:20:40 +01:00
|
|
|
extern void ui_block_align_calc(uiBlock *block);
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
extern struct ColorManagedDisplay *ui_block_cm_display_get(uiBlock *block);
|
|
|
|
|
void ui_block_cm_to_display_space_v3(uiBlock *block, float pixel[3]);
|
|
|
|
|
void ui_block_cm_to_scene_linear_v3(uiBlock *block, float pixel[3]);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 10:05:07 +00:00
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
/* interface_regions.c */
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
|
2013-04-11 02:28:34 +00:00
|
|
|
struct uiKeyNavLock {
|
|
|
|
|
/* set when we're using keyinput */
|
|
|
|
|
bool is_keynav;
|
|
|
|
|
/* only used to check if we've moved the cursor */
|
|
|
|
|
int event_xy[2];
|
|
|
|
|
};
|
|
|
|
|
|
2014-06-15 01:40:15 +10:00
|
|
|
typedef uiBlock * (*uiBlockHandleCreateFunc)(struct bContext *C, struct uiPopupBlockHandle *handle, void *arg1);
|
|
|
|
|
|
|
|
|
|
struct uiPopupBlockCreate {
|
|
|
|
|
uiBlockCreateFunc create_func;
|
|
|
|
|
uiBlockHandleCreateFunc handle_create_func;
|
|
|
|
|
void *arg;
|
|
|
|
|
|
|
|
|
|
int event_xy[2];
|
|
|
|
|
|
|
|
|
|
/* when popup is initialized from a button */
|
|
|
|
|
ARegion *butregion;
|
|
|
|
|
};
|
|
|
|
|
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
struct uiPopupBlockHandle {
|
|
|
|
|
/* internal */
|
|
|
|
|
struct ARegion *region;
|
2013-07-24 20:50:30 +00:00
|
|
|
|
|
|
|
|
/* use only for 'UI_BLOCK_MOVEMOUSE_QUIT' popups */
|
2013-06-13 09:12:53 +00:00
|
|
|
float towards_xy[2];
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
double towardstime;
|
2013-04-04 15:16:29 +00:00
|
|
|
bool dotowards;
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
|
2013-04-04 15:16:29 +00:00
|
|
|
bool popup;
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
void (*popup_func)(struct bContext *C, void *arg, int event);
|
2013-02-19 13:37:48 +00:00
|
|
|
void (*cancel_func)(struct bContext *C, void *arg);
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
void *popup_arg;
|
Code holiday commit:
- fix: user pref, window title was reset to 'Blender' on tab usage
- Undo history menu back:
- name "Undo History"
- hotkey alt+ctrl+z (alt+apple+z for mac)
- works like 2.4x, only for global undo, editmode and particle edit.
- Menu scroll
- for small windows or screens, popup menus now allow to display
all items, using internal scrolling
- works with a timer, scrolling 10 items per second when mouse
is over the top or bottom arrow
- if menu is too big to display, it now draws to top or bottom,
based on largest available space.
- also works for hotkey driven pop up menus.
- User pref "DPI" follows widget/layout size
- widgets & headers now become bigger and smaller, to match
'dpi' font sizes. Works well to match UI to monitor size.
- note that icons can get fuzzy, we need better mipmaps for it
2011-06-04 17:03:46 +00:00
|
|
|
|
2014-06-15 01:40:15 +10:00
|
|
|
/* store data for refreshing popups */
|
|
|
|
|
struct uiPopupBlockCreate popup_create_vars;
|
|
|
|
|
|
Code holiday commit:
- fix: user pref, window title was reset to 'Blender' on tab usage
- Undo history menu back:
- name "Undo History"
- hotkey alt+ctrl+z (alt+apple+z for mac)
- works like 2.4x, only for global undo, editmode and particle edit.
- Menu scroll
- for small windows or screens, popup menus now allow to display
all items, using internal scrolling
- works with a timer, scrolling 10 items per second when mouse
is over the top or bottom arrow
- if menu is too big to display, it now draws to top or bottom,
based on largest available space.
- also works for hotkey driven pop up menus.
- User pref "DPI" follows widget/layout size
- widgets & headers now become bigger and smaller, to match
'dpi' font sizes. Works well to match UI to monitor size.
- note that icons can get fuzzy, we need better mipmaps for it
2011-06-04 17:03:46 +00:00
|
|
|
struct wmTimer *scrolltimer;
|
2009-02-04 11:52:16 +00:00
|
|
|
|
2013-04-11 02:28:34 +00:00
|
|
|
struct uiKeyNavLock keynav_state;
|
|
|
|
|
|
2009-02-04 11:52:16 +00:00
|
|
|
/* for operator popups */
|
UI: Layout Engine
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
2009-05-15 11:19:59 +00:00
|
|
|
struct wmOperatorType *optype;
|
2009-02-07 16:43:55 +00:00
|
|
|
ScrArea *ctx_area;
|
|
|
|
|
ARegion *ctx_region;
|
2011-10-03 01:36:25 +00:00
|
|
|
int opcontext;
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
|
|
|
|
|
/* return values */
|
|
|
|
|
int butretval;
|
|
|
|
|
int menuretval;
|
2014-06-02 13:15:29 +10:00
|
|
|
int retvalue;
|
2013-07-25 12:46:20 +00:00
|
|
|
float retvec[4];
|
2012-10-04 20:12:05 +00:00
|
|
|
|
|
|
|
|
/* menu direction */
|
|
|
|
|
int direction;
|
2014-04-02 18:42:08 +11:00
|
|
|
|
|
|
|
|
/* #ifdef USE_DRAG_POPUP */
|
|
|
|
|
bool is_grab;
|
|
|
|
|
int grab_xy_prev[2];
|
|
|
|
|
/* #endif */
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
};
|
|
|
|
|
|
2012-09-11 23:10:23 +00:00
|
|
|
uiBlock *ui_block_func_COLOR(struct bContext *C, uiPopupBlockHandle *handle, void *arg_but);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
struct ARegion *ui_tooltip_create(struct bContext *C, struct ARegion *butregion, uiBut *but);
|
|
|
|
|
void ui_tooltip_free(struct bContext *C, struct ARegion *ar);
|
|
|
|
|
|
2014-02-13 09:36:54 +11:00
|
|
|
uiBut *ui_popup_menu_memory_get(struct uiBlock *block);
|
2014-05-02 09:23:53 +10:00
|
|
|
void ui_popup_menu_memory_set(uiBlock *block, struct uiBut *but);
|
|
|
|
|
|
|
|
|
|
void ui_popup_translate(struct bContext *C, struct ARegion *ar, const int mdiff[2]);
|
Code holiday commit:
- fix: user pref, window title was reset to 'Blender' on tab usage
- Undo history menu back:
- name "Undo History"
- hotkey alt+ctrl+z (alt+apple+z for mac)
- works like 2.4x, only for global undo, editmode and particle edit.
- Menu scroll
- for small windows or screens, popup menus now allow to display
all items, using internal scrolling
- works with a timer, scrolling 10 items per second when mouse
is over the top or bottom arrow
- if menu is too big to display, it now draws to top or bottom,
based on largest available space.
- also works for hotkey driven pop up menus.
- User pref "DPI" follows widget/layout size
- widgets & headers now become bigger and smaller, to match
'dpi' font sizes. Works well to match UI to monitor size.
- note that icons can get fuzzy, we need better mipmaps for it
2011-06-04 17:03:46 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
ColorPicker *ui_block_colorpicker_create(struct uiBlock *block);
|
Code holiday commit:
- fix: user pref, window title was reset to 'Blender' on tab usage
- Undo history menu back:
- name "Undo History"
- hotkey alt+ctrl+z (alt+apple+z for mac)
- works like 2.4x, only for global undo, editmode and particle edit.
- Menu scroll
- for small windows or screens, popup menus now allow to display
all items, using internal scrolling
- works with a timer, scrolling 10 items per second when mouse
is over the top or bottom arrow
- if menu is too big to display, it now draws to top or bottom,
based on largest available space.
- also works for hotkey driven pop up menus.
- User pref "DPI" follows widget/layout size
- widgets & headers now become bigger and smaller, to match
'dpi' font sizes. Works well to match UI to monitor size.
- note that icons can get fuzzy, we need better mipmaps for it
2011-06-04 17:03:46 +00:00
|
|
|
void ui_popup_block_scrolltest(struct uiBlock *block);
|
2009-08-21 02:51:56 +00:00
|
|
|
|
2014-03-12 18:58:50 +02:00
|
|
|
void ui_rgb_to_color_picker_compat_v(const float rgb[3], float r_cp[3]);
|
2014-04-12 19:27:16 +03:00
|
|
|
void ui_rgb_to_color_picker_v(const float rgb[3], float r_cp[3]);
|
2014-03-12 18:58:50 +02:00
|
|
|
void ui_color_picker_to_rgb_v(const float r_cp[3], float rgb[3]);
|
|
|
|
|
void ui_color_picker_to_rgb(float r_cp0, float r_cp1, float r_cp2, float *r, float *g, float *b);
|
2010-10-13 13:53:49 +00:00
|
|
|
|
2009-06-03 18:31:37 +00:00
|
|
|
/* searchbox for string button */
|
2009-06-02 18:10:06 +00:00
|
|
|
ARegion *ui_searchbox_create(struct bContext *C, struct ARegion *butregion, uiBut *but);
|
2013-04-04 02:05:11 +00:00
|
|
|
bool ui_searchbox_inside(struct ARegion *ar, int x, int y);
|
2013-05-02 04:59:52 +00:00
|
|
|
int ui_searchbox_find_index(struct ARegion *ar, const char *name);
|
2013-04-04 15:16:29 +00:00
|
|
|
void ui_searchbox_update(struct bContext *C, struct ARegion *ar, uiBut *but, const bool reset);
|
2013-11-22 01:35:38 +01:00
|
|
|
int ui_searchbox_autocomplete(struct bContext *C, struct ARegion *ar, uiBut *but, char *str);
|
2013-02-01 01:01:20 +00:00
|
|
|
void ui_searchbox_event(struct bContext *C, struct ARegion *ar, uiBut *but, const struct wmEvent *event);
|
2013-05-02 04:59:52 +00:00
|
|
|
bool ui_searchbox_apply(uiBut *but, struct ARegion *ar);
|
2009-06-02 18:10:06 +00:00
|
|
|
void ui_searchbox_free(struct bContext *C, struct ARegion *ar);
|
2014-11-09 21:20:40 +01:00
|
|
|
void ui_but_search_refresh(uiBut *but);
|
2009-06-02 18:10:06 +00:00
|
|
|
|
2014-06-15 01:40:15 +10:00
|
|
|
uiBlock *ui_popup_block_refresh(struct bContext *C, uiPopupBlockHandle *handle,
|
|
|
|
|
ARegion *butregion, uiBut *but);
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
|
|
|
|
|
uiPopupBlockHandle *ui_popup_block_create(struct bContext *C, struct ARegion *butregion, uiBut *but,
|
2012-05-17 07:59:25 +00:00
|
|
|
uiBlockCreateFunc create_func, uiBlockHandleCreateFunc handle_create_func,
|
|
|
|
|
void *arg);
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
uiPopupBlockHandle *ui_popup_menu_create(struct bContext *C, struct ARegion *butregion, uiBut *but,
|
2014-02-10 12:52:35 +11:00
|
|
|
uiMenuCreateFunc create_func, void *arg);
|
2009-08-21 02:51:56 +00:00
|
|
|
|
2.5: UI & Menus
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
2009-01-30 12:18:08 +00:00
|
|
|
void ui_popup_block_free(struct bContext *C, uiPopupBlockHandle *handle);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
int ui_but_menu_step(uiBut *but, int step);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2.5
Smaller jobs, all in one commit!
- Moved object_do_update out of view3d drawing, into
the event system (currently after notifiers).
Depsgraph calls for setting update flags will have to
keep track of each Screen's needs, so a UI showing only
a Sequencer doesn't do objects.
- Added button in "Properties region" in 3D window to set
or disable 4-split, including the 3 options it has.
(lock, box, clip)
- Restored legacy code for UI, to make things work like
bone rename, autocomplete.
- Node editor now shows Curves widgets again
- Bugfix: composite job increased Viewer user id count
- Bugfix: Node editor, not "Enable nodes" still called
a Job, which didn't do anything
- Various code cleaning, unused vars and prototypes.
2009-02-11 16:54:55 +00:00
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
/* interface_panel.c */
|
2013-12-03 23:53:21 +11:00
|
|
|
extern int ui_handler_panel_region(struct bContext *C, const struct wmEvent *event, struct ARegion *ar);
|
2013-12-17 03:21:55 +11:00
|
|
|
extern void ui_draw_aligned_panel(struct uiStyle *style, uiBlock *block, const rcti *rect, const bool show_pin);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
/* interface_draw.c */
|
2014-11-09 21:20:40 +01:00
|
|
|
extern void ui_draw_dropshadow(const rctf *rct, float radius, float aspect, float alpha, int select);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2012-12-13 02:40:49 +00:00
|
|
|
void ui_draw_gradient(const rcti *rect, const float hsv[3], const int type, const float alpha);
|
2010-01-21 00:00:45 +00:00
|
|
|
|
2013-12-07 15:47:57 +11:00
|
|
|
void ui_draw_but_HISTOGRAM(ARegion *ar, uiBut *but, struct uiWidgetColors *wcol, const rcti *rect);
|
|
|
|
|
void ui_draw_but_WAVEFORM(ARegion *ar, uiBut *but, struct uiWidgetColors *wcol, const rcti *rect);
|
|
|
|
|
void ui_draw_but_VECTORSCOPE(ARegion *ar, uiBut *but, struct uiWidgetColors *wcol, const rcti *rect);
|
|
|
|
|
void ui_draw_but_COLORBAND(uiBut *but, struct uiWidgetColors *wcol, const rcti *rect);
|
2014-11-09 21:20:40 +01:00
|
|
|
void ui_draw_but_UNITVEC(uiBut *but, struct uiWidgetColors *wcol, const rcti *rect);
|
2013-12-07 15:47:57 +11:00
|
|
|
void ui_draw_but_CURVE(ARegion *ar, uiBut *but, struct uiWidgetColors *wcol, const rcti *rect);
|
|
|
|
|
void ui_draw_but_IMAGE(ARegion *ar, uiBut *but, struct uiWidgetColors *wcol, const rcti *rect);
|
|
|
|
|
void ui_draw_but_TRACKPREVIEW(ARegion *ar, uiBut *but, struct uiWidgetColors *wcol, const rcti *rect);
|
|
|
|
|
void ui_draw_but_NODESOCKET(ARegion *ar, uiBut *but, struct uiWidgetColors *wcol, const rcti *rect);
|
2009-04-06 15:44:30 +00:00
|
|
|
|
UI: don't use operators anymore for handling user interface events, but rather
a special UI handler which makes the code clearer. This UI handler is attached
to the region along with other handlers, and also gets a callback when all
handlers for the region are removed to ensure things are properly cleaned up.
This should fix XXX's in the UI code related to events and context switching.
Most of the changes are in interface_handlers.c, which was renamed from
interface_ops.c, to convert operators to the UI handler. UI code notes:
* uiBeginBlock/uiEndBlock/uiFreeBlocks now takes a context argument, this is
required to properly cancel things like timers or tooltips when the region
gets removed.
* UI_add_region_handlers will add the region level UI handlers, to be used
when adding keymap handlers etc. This replaces the UI keymap.
* When the UI code starts a modal interaction (number sliding, text editing,
opening a menu, ..), it will add an UI handler at the window level which
will block events.
Windowmanager changes:
* Added an UI handler next to the existing keymap and operator modal handlers.
It has an event handling and remove callback, and like operator modal handlers
will remember the area and region if it is registered at the window level.
* Removed the MESSAGE event.
* Operator cancel and UI handler remove callbacks now get the
window/area/region restored in the context, like the operator modal and UI
handler event callbacks.
* Regions now receive MOUSEMOVE events for the mouse going outside of the
region. This was already happening for areas, but UI buttons are at the region
level so we need it there.
Issues:
* Tooltips and menus stay open when switching to another window, and button
highlight doesn't work without moving the mouse first when Blender starts up.
I tried using some events like Q_FIRSTTIME, WINTHAW, but those don't seem to
arrive..
* Timeline header buttons seem to be moving one pixel or so sometimes when
interacting with them.
* Seems not due to this commit, but UI and keymap handlers are leaking. It
seems that handlers are being added to regions in all screens, also in regions
of areas that are not visible, but these handlers are not removed. Probably
there should only be handlers in visible regions?
2008-12-10 04:36:33 +00:00
|
|
|
/* interface_handlers.c */
|
2013-12-20 01:04:01 +11:00
|
|
|
PointerRNA *ui_handle_afterfunc_add_operator(struct wmOperatorType *ot, int opcontext, bool create_props);
|
2013-02-01 01:01:20 +00:00
|
|
|
extern void ui_pan_to_scroll(const struct wmEvent *event, int *type, int *val);
|
2014-11-09 21:20:40 +01:00
|
|
|
extern void ui_but_activate_event(struct bContext *C, struct ARegion *ar, uiBut *but);
|
|
|
|
|
extern void ui_but_activate_over(struct bContext *C, struct ARegion *ar, uiBut *but);
|
|
|
|
|
extern void ui_but_execute_begin(struct bContext *C, struct ARegion *ar, uiBut *but, void **active_back);
|
|
|
|
|
extern void ui_but_execute_end(struct bContext *C, struct ARegion *ar, uiBut *but, void *active_back);
|
|
|
|
|
extern void ui_but_active_free(const struct bContext *C, uiBut *but);
|
|
|
|
|
extern bool ui_but_is_active(struct ARegion *ar) ATTR_WARN_UNUSED_RESULT;
|
|
|
|
|
extern int ui_but_menu_direction(uiBut *but);
|
|
|
|
|
extern void ui_but_text_password_hide(char password_str[UI_MAX_DRAW_STR], uiBut *but, const bool restore);
|
2015-01-21 16:27:21 +11:00
|
|
|
extern uiBut *ui_but_find_select_in_enum(uiBut *but, int direction);
|
2014-11-09 21:20:40 +01:00
|
|
|
extern uiBut *ui_but_find_active_in_region(struct ARegion *ar);
|
2014-08-03 20:30:12 +10:00
|
|
|
bool ui_but_is_editable(const uiBut *but);
|
2014-11-11 19:02:18 +01:00
|
|
|
bool ui_but_is_editable_as_text(const uiBut *but);
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
void ui_but_pie_dir_visual(RadialDirection dir, float vec[2]);
|
|
|
|
|
void ui_but_pie_dir(RadialDirection dir, float vec[2]);
|
2014-11-09 21:20:40 +01:00
|
|
|
float ui_block_calc_pie_segment(struct uiBlock *block, const float event_xy[2]);
|
2014-07-21 12:02:05 +02:00
|
|
|
|
2014-11-09 21:20:40 +01:00
|
|
|
void ui_but_clipboard_free(void);
|
2013-12-17 03:21:55 +11:00
|
|
|
void ui_panel_menu(struct bContext *C, ARegion *ar, Panel *pa);
|
2014-02-08 09:03:25 +11:00
|
|
|
uiBut *ui_but_find_old(uiBlock *block_old, const uiBut *but_new);
|
|
|
|
|
uiBut *ui_but_find_new(uiBlock *block_old, const uiBut *but_new);
|
UI: don't use operators anymore for handling user interface events, but rather
a special UI handler which makes the code clearer. This UI handler is attached
to the region along with other handlers, and also gets a callback when all
handlers for the region are removed to ensure things are properly cleaned up.
This should fix XXX's in the UI code related to events and context switching.
Most of the changes are in interface_handlers.c, which was renamed from
interface_ops.c, to convert operators to the UI handler. UI code notes:
* uiBeginBlock/uiEndBlock/uiFreeBlocks now takes a context argument, this is
required to properly cancel things like timers or tooltips when the region
gets removed.
* UI_add_region_handlers will add the region level UI handlers, to be used
when adding keymap handlers etc. This replaces the UI keymap.
* When the UI code starts a modal interaction (number sliding, text editing,
opening a menu, ..), it will add an UI handler at the window level which
will block events.
Windowmanager changes:
* Added an UI handler next to the existing keymap and operator modal handlers.
It has an event handling and remove callback, and like operator modal handlers
will remember the area and region if it is registered at the window level.
* Removed the MESSAGE event.
* Operator cancel and UI handler remove callbacks now get the
window/area/region restored in the context, like the operator modal and UI
handler event callbacks.
* Regions now receive MOUSEMOVE events for the mouse going outside of the
region. This was already happening for areas, but UI buttons are at the region
level so we need it there.
Issues:
* Tooltips and menus stay open when switching to another window, and button
highlight doesn't work without moving the mouse first when Blender starts up.
I tried using some events like Q_FIRSTTIME, WINTHAW, but those don't seem to
arrive..
* Timeline header buttons seem to be moving one pixel or so sometimes when
interacting with them.
* Seems not due to this commit, but UI and keymap handlers are leaking. It
seems that handlers are being added to regions in all screens, also in regions
of areas that are not visible, but these handlers are not removed. Probably
there should only be handlers in visible regions?
2008-12-10 04:36:33 +00:00
|
|
|
|
2014-12-07 00:58:17 +01:00
|
|
|
#ifdef WITH_INPUT_IME
|
|
|
|
|
void ui_but_ime_reposition(uiBut *but, int x, int y, bool complete);
|
2015-03-26 21:24:01 +01:00
|
|
|
struct wmIMEData *ui_but_ime_data_get(uiBut *but);
|
2014-12-07 00:58:17 +01:00
|
|
|
#endif
|
|
|
|
|
|
2009-04-02 15:01:11 +00:00
|
|
|
/* interface_widgets.c */
|
|
|
|
|
void ui_draw_anti_tria(float x1, float y1, float x2, float y2, float x3, float y3);
|
2013-03-07 06:46:50 +00:00
|
|
|
void ui_draw_anti_roundbox(int mode, float minx, float miny, float maxx, float maxy, float rad, bool use_alpha);
|
2009-04-10 14:06:24 +00:00
|
|
|
void ui_draw_menu_back(struct uiStyle *style, uiBlock *block, rcti *rect);
|
Pie Menus C code backend.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
2014-08-11 10:39:59 +02:00
|
|
|
void ui_draw_pie_center(uiBlock *block);
|
2012-05-08 18:29:02 +00:00
|
|
|
uiWidgetColors *ui_tooltip_get_theme(void);
|
2013-03-26 07:29:01 +00:00
|
|
|
void ui_draw_tooltip_background(uiStyle *UNUSED(style), uiBlock *block, rcti *rect);
|
2009-06-03 18:31:37 +00:00
|
|
|
void ui_draw_search_back(struct uiStyle *style, uiBlock *block, rcti *rect);
|
2014-04-17 13:46:34 +10:00
|
|
|
bool ui_link_bezier_points(const rcti *rect, float coord_array[][2], int resol);
|
2012-12-13 02:40:49 +00:00
|
|
|
void ui_draw_link_bezier(const rcti *rect);
|
2009-06-03 18:31:37 +00:00
|
|
|
|
2009-06-08 10:00:14 +00:00
|
|
|
extern void ui_draw_but(const struct bContext *C, ARegion *ar, struct uiStyle *style, uiBut *but, rcti *rect);
|
2012-05-08 18:29:02 +00:00
|
|
|
/* theme color init */
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
struct ThemeUI;
|
|
|
|
|
void ui_widget_color_init(struct ThemeUI *tui);
|
2009-04-09 18:11:18 +00:00
|
|
|
|
2013-09-11 04:56:35 +00:00
|
|
|
void ui_draw_menu_item(struct uiFontStyle *fstyle, rcti *rect, const char *name, int iconid, int state, bool use_sep);
|
2011-02-07 22:48:23 +00:00
|
|
|
void ui_draw_preview_item(struct uiFontStyle *fstyle, rcti *rect, const char *name, int iconid, int state);
|
2009-06-02 18:10:06 +00:00
|
|
|
|
2013-01-17 18:59:19 +00:00
|
|
|
#define UI_TEXT_MARGIN_X 0.4f
|
2014-11-10 13:58:03 +01:00
|
|
|
#define UI_POPUP_MARGIN (UI_DPI_FAC * 12)
|
2013-01-17 18:59:19 +00:00
|
|
|
|
2009-04-09 18:11:18 +00:00
|
|
|
/* interface_style.c */
|
|
|
|
|
void uiStyleInit(void);
|
2009-04-02 15:01:11 +00:00
|
|
|
|
2009-06-25 15:41:27 +00:00
|
|
|
/* interface_icons.c */
|
2015-01-01 23:26:03 +11:00
|
|
|
int ui_id_icon_get(const struct bContext *C, struct ID *id, const bool big);
|
2009-06-25 15:41:27 +00:00
|
|
|
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
/* resources.c */
|
|
|
|
|
void init_userdef_do_versions(void);
|
2010-03-30 04:27:13 +00:00
|
|
|
void ui_theme_init_default(void);
|
2013-06-07 00:27:21 +00:00
|
|
|
void ui_style_init_default(void);
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
void ui_resources_init(void);
|
|
|
|
|
void ui_resources_free(void);
|
|
|
|
|
|
UI: Layout Engine
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
2009-05-15 11:19:59 +00:00
|
|
|
/* interface_layout.c */
|
2009-06-27 01:15:31 +00:00
|
|
|
void ui_layout_add_but(uiLayout *layout, uiBut *but);
|
2014-01-20 11:13:53 +11:00
|
|
|
bool ui_but_can_align(uiBut *but) ATTR_WARN_UNUSED_RESULT;
|
2009-06-27 01:15:31 +00:00
|
|
|
void ui_but_add_search(uiBut *but, PointerRNA *ptr, PropertyRNA *prop, PointerRNA *searchptr, PropertyRNA *searchprop);
|
2013-04-04 15:16:29 +00:00
|
|
|
void ui_but_add_shortcut(uiBut *but, const char *key_str, const bool do_strip);
|
Fix [#35750] list items in properties editor (text colors not following list item theme).
Issue goes back since we stopped using LISTROW button to draw item's name (i.e. since we have custom buttons in list items!).
This commit:
* Adds a new flag to uiBlock, UI_BLOCK_LIST_ITEM, to mark blocks used for each list item.
* Adds a new button type, LISTLABEL, which basically behaves exactly as LABEL, but uses wcol_list_item color set.
* When uiItemL is called, it checks whether current block has UI_BLOCK_LIST_ITEM set, and if so, switch produced button to LISTLABEL type.
* Adds a new helper func, ui_layout_list_set_labels_active, called after the active list item has been "drawn", to set all LISTLABEL buttons as UI_SELECT.
Note custom widget_state_label() was removed, in interface_widgets.c, as it did nothing more than default widget_state().
Thanks to Brecht for the review and advices.
2013-06-26 07:28:55 +00:00
|
|
|
void ui_layout_list_set_labels_active(uiLayout *layout);
|
2009-04-10 14:06:24 +00:00
|
|
|
|
2009-04-03 23:30:32 +00:00
|
|
|
/* interface_anim.c */
|
|
|
|
|
void ui_but_anim_flag(uiBut *but, float cfra);
|
|
|
|
|
void ui_but_anim_insert_keyframe(struct bContext *C);
|
|
|
|
|
void ui_but_anim_delete_keyframe(struct bContext *C);
|
2012-07-17 15:16:44 +00:00
|
|
|
void ui_but_anim_clear_keyframe(struct bContext *C);
|
2009-04-10 13:08:12 +00:00
|
|
|
void ui_but_anim_add_driver(struct bContext *C);
|
|
|
|
|
void ui_but_anim_remove_driver(struct bContext *C);
|
2009-09-25 04:51:04 +00:00
|
|
|
void ui_but_anim_copy_driver(struct bContext *C);
|
|
|
|
|
void ui_but_anim_paste_driver(struct bContext *C);
|
2009-09-04 07:26:32 +00:00
|
|
|
void ui_but_anim_add_keyingset(struct bContext *C);
|
|
|
|
|
void ui_but_anim_remove_keyingset(struct bContext *C);
|
2014-01-20 11:13:53 +11:00
|
|
|
bool ui_but_anim_expression_get(uiBut *but, char *str, size_t maxlen);
|
|
|
|
|
bool ui_but_anim_expression_set(uiBut *but, const char *str);
|
|
|
|
|
bool ui_but_anim_expression_create(uiBut *but, const char *str);
|
2010-01-12 03:01:19 +00:00
|
|
|
void ui_but_anim_autokey(struct bContext *C, uiBut *but, struct Scene *scene, float cfra);
|
2009-04-03 23:30:32 +00:00
|
|
|
|
2013-10-08 15:07:52 +00:00
|
|
|
/* interface_eyedropper.c */
|
|
|
|
|
void UI_OT_eyedropper_color(struct wmOperatorType *ot);
|
2013-10-08 15:32:54 +00:00
|
|
|
void UI_OT_eyedropper_id(struct wmOperatorType *ot);
|
2015-01-14 08:01:40 +11:00
|
|
|
void UI_OT_eyedropper_depth(struct wmOperatorType *ot);
|
2013-10-08 15:07:52 +00:00
|
|
|
|
|
|
|
|
#endif /* __INTERFACE_INTERN_H__ */
|
