archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
cda566d6464cac92a766df0b065d43d8240e23f2
blender-archive/source/blender/editors/mesh/mesh_intern.h

239 lines
10 KiB
C++
Raw Normal View History

2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/**
* $Id:
*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
* ***** END GPL LICENSE BLOCK *****
*/
/* Internal for editmesh_xxxx.c functions */
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
#ifndef MESH_INTERN_H
#define MESH_INTERN_H
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
struct bContext;
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
struct wmOperatorType;
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
#define UVCOPY(t, s) memcpy(t, s, 2 * sizeof(float));
/* ******************** editface.c */
int edgetag_context_check(Scene *scene, EditEdge *eed);
void edgetag_context_set(Scene *scene, EditEdge *eed, int val);
int edgetag_shortest_path(Scene *scene, EditMesh *em, EditEdge *source, EditEdge *target);
/* ******************* editmesh.c */
extern void free_editvert(EditMesh *em, EditVert *eve);
extern void free_editedge(EditMesh *em, EditEdge *eed);
extern void free_editface(EditMesh *em, EditFace *efa);
void free_editMesh(EditMesh *em);
extern void free_vertlist(EditMesh *em, ListBase *edve);
extern void free_edgelist(EditMesh *em, ListBase *lb);
extern void free_facelist(EditMesh *em, ListBase *lb);
extern void remedge(EditMesh *em, EditEdge *eed);
extern struct EditVert *addvertlist(EditMesh *em, float *vec, struct EditVert *example);
extern struct EditEdge *addedgelist(EditMesh *em, struct EditVert *v1, struct EditVert *v2, struct EditEdge *example);
extern struct EditFace *addfacelist(EditMesh *em, struct EditVert *v1, struct EditVert *v2, struct EditVert *v3, struct EditVert *v4, struct EditFace *example, struct EditFace *exampleEdges);
extern struct EditEdge *findedgelist(EditMesh *em, struct EditVert *v1, struct EditVert *v2);
EditVert *editedge_getOtherVert(EditEdge *eed, EditVert *eve);
EditVert *editedge_getSharedVert(EditEdge *eed, EditEdge *eed2);
int editedge_containsVert(struct EditEdge *eed, struct EditVert *eve);
int editface_containsVert(struct EditFace *efa, struct EditVert *eve);
int editface_containsEdge(struct EditFace *efa, struct EditEdge *eed);
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
void em_setup_viewcontext(struct bContext *C, ViewContext *vc);
2.5 Edit mesh: Separate options back. Use SHIFT+P for it, PKEY has been stolen! :)
2009-01-30 15:01:14 +00:00
void MESH_OT_separate(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_add.c */
op names change
2009-04-12 17:28:16 +00:00
void MESH_OT_primitive_plane_add(struct wmOperatorType *ot);
void MESH_OT_primitive_cube_add(struct wmOperatorType *ot);
void MESH_OT_primitive_circle_add(struct wmOperatorType *ot);
void MESH_OT_primitive_cylinder_add(struct wmOperatorType *ot);
void MESH_OT_primitive_tube_add(struct wmOperatorType *ot);
void MESH_OT_primitive_cone_add(struct wmOperatorType *ot);
void MESH_OT_primitive_grid_add(struct wmOperatorType *ot);
void MESH_OT_primitive_monkey_add(struct wmOperatorType *ot);
void MESH_OT_primitive_uv_sphere_add(struct wmOperatorType *ot);
void MESH_OT_primitive_ico_sphere_add(struct wmOperatorType *ot);
2.5 - Edit mesh: Add ctrl+click add vertex or extrude. I've made it not move the 3d cursor in that case. Also found out tweak events conflicted with existing keymap definitions; on tweak failure (= no mousemove) it now passes on the mouse event as 'mouse down' for the remaining keymaps to check. These then actually respond to mouse-up instead of down... The location in the keymaps where tweaks get generated remains important. Examples: 1 - 'select' mouse-handler, operator return pass-through 2 - tweak handler checks, and makes tweak event 3 - grabber responds to tweak event 1 - ctrl+mouse tweak handler checks, makes tweak event, or passes event on 2 - if tweak event, it runs lasso 3 - else when passed on, ctrl+click extrude happens In the first case, select works on mouse-down, immediate. In the second case, extrude happens on mouse-release, even though the keymap defined mouse-press. This will make designing nice balanced keymaps still not simple; especially because you can't tell operators to pass on the key... although we can add the convention that select-mouse operators always pass on to enable tweaks. Still a good reason to wait with custom keymaps when this is fully settled!
2009-01-30 18:18:41 +00:00
void MESH_OT_dupli_extrude_cursor(struct wmOperatorType *ot);
op names change
2009-04-12 17:28:16 +00:00
void MESH_OT_edge_face_add(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void MESH_OT_fgon_make(struct wmOperatorType *ot);
void MESH_OT_fgon_clear(struct wmOperatorType *ot);
make and clear fgon MKEY and shift+MKEY. ton: please check, it doesn't do what it should right now
2009-01-31 03:23:41 +00:00
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_lib.c */
2.5 - Depricated another bunch of globals; all the totobj, totmesh, totvert, and so on. - All code that needs such totals now count it themselves, these stats were not supposed to be reliable - Editmesh now stores and manages own totals. - Todo: make a scene->stats that tracks notifiers. Bugfix: selecting failed in editmesh, backbuffer stuff was too late, already using index ranges before it was set.
2009-01-15 15:01:39 +00:00
void EM_stats_update(EditMesh *em);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
extern void EM_fgon_flags(EditMesh *em);
extern void EM_hide_reset(EditMesh *em);
extern int faceselectedOR(EditFace *efa, int flag);
extern int faceselectedAND(EditFace *efa, int flag);
void EM_remove_selection(EditMesh *em, void *data, int type);
void EM_clear_flag_all(EditMesh *em, int flag);
void EM_set_flag_all(EditMesh *em, int flag);
void EM_data_interp_from_verts(EditMesh *em, EditVert *v1, EditVert *v2, EditVert *eve, float fac);
void EM_data_interp_from_faces(EditMesh *em, EditFace *efa1, EditFace *efa2, EditFace *efan, int i1, int i2, int i3, int i4);
int EM_nvertices_selected(EditMesh *em);
2.5 - Depricated another bunch of globals; all the totobj, totmesh, totvert, and so on. - All code that needs such totals now count it themselves, these stats were not supposed to be reliable - Editmesh now stores and manages own totals. - Todo: make a scene->stats that tracks notifiers. Bugfix: selecting failed in editmesh, backbuffer stuff was too late, already using index ranges before it was set.
2009-01-15 15:01:39 +00:00
int EM_nedges_selected(EditMesh *em);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
int EM_nfaces_selected(EditMesh *em);
2.5 - Depricated another bunch of globals; all the totobj, totmesh, totvert, and so on. - All code that needs such totals now count it themselves, these stats were not supposed to be reliable - Editmesh now stores and manages own totals. - Todo: make a scene->stats that tracks notifiers. Bugfix: selecting failed in editmesh, backbuffer stuff was too late, already using index ranges before it was set.
2009-01-15 15:01:39 +00:00
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
float EM_face_perimeter(EditFace *efa);
void EM_store_selection(EditMesh *em, void *data, int type);
extern EditFace *exist_face(EditMesh *em, EditVert *v1, EditVert *v2, EditVert *v3, EditVert *v4);
extern void flipface(EditMesh *em, EditFace *efa); // flips for normal direction
extern int compareface(EditFace *vl1, EditFace *vl2);
/* flag for selection bits, *nor will be filled with normal for extrusion constraint */
/* return value defines if such normal was set */
extern short extrudeflag_face_indiv(EditMesh *em, short flag, float *nor);
extern short extrudeflag_verts_indiv(EditMesh *em, short flag, float *nor);
extern short extrudeflag_edges_indiv(EditMesh *em, short flag, float *nor);
2.5 From the anti-globalization department: G.obedit terminated! Wherever possible, use CTX_data_edit_object(C) to get this now. It's stored in scene now, and the screen context has it defined.
2009-01-02 19:10:35 +00:00
extern short extrudeflag_vert(Object *obedit, EditMesh *em, short flag, float *nor);
extern short extrudeflag(Object *obedit, EditMesh *em, short flag, float *nor);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
extern void adduplicateflag(EditMesh *em, int flag);
extern void delfaceflag(EditMesh *em, int flag);
extern void rotateflag(EditMesh *em, short flag, float *cent, float rotmat[][3]);
extern void translateflag(EditMesh *em, short flag, float *vec);
extern int convex(float *v1, float *v2, float *v3, float *v4);
extern struct EditFace *EM_face_from_faces(EditMesh *em, struct EditFace *efa1,
struct EditFace *efa2, int i1, int i2, int i3, int i4);
2.5 Added SpaceLogic, to restore the old logic buttons into. In future it can be used for a more advanced logic editor, with states, behaviour, whatever. We'll see! This commit only adds the backend for new space. Committed this now as reference for when we need another space type. It's still not well plugin-able (dynamic space types), but my idea is to just have a new SpacePlugIn for this, with a neat small API to define all relevant callbacks. Also note the icon for the spacetype is wrong still.
2009-06-16 13:09:36 +00:00
extern int EM_view3d_poll(struct bContext *C);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_loop.c */
#define LOOP_SELECT 1
#define LOOP_CUT 2
2.5 Edit Mesh: Knife Cut back. I've put it for now under ALT+CTRL+LMB, modeless direct cutting. Options for polyline input and snapping is for later. At least this works cool :)
2009-02-07 15:44:16 +00:00
void MESH_OT_knife_cut(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_mods.c */
editmesh_mods.c op names change
2009-04-12 17:43:43 +00:00
void MESH_OT_loop_select(struct wmOperatorType *ot);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void MESH_OT_select_all_toggle(struct wmOperatorType *ot);
edit mesh operators for edit mesh view
2009-01-13 02:09:58 +00:00
void MESH_OT_select_more(struct wmOperatorType *ot);
void MESH_OT_select_less(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_select_invert(struct wmOperatorType *ot);
edit mesh operators for edit mesh view
2009-01-13 02:09:58 +00:00
void MESH_OT_select_non_manifold(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_select_linked(struct wmOperatorType *ot);
void MESH_OT_select_linked_pick(struct wmOperatorType *ot);
void MESH_OT_hide(struct wmOperatorType *ot);
void MESH_OT_reveal(struct wmOperatorType *ot);
2.5: Operator naming, reviewed some of the recent changes by Shaul, did some minor tweaks.
2009-04-15 15:40:31 +00:00
void MESH_OT_normals_make_consistent(struct wmOperatorType *ot);
editmesh_mods.c op names change
2009-04-12 17:43:43 +00:00
void MESH_OT_faces_select_linked_flat(struct wmOperatorType *ot);
void MESH_OT_edges_select_sharp(struct wmOperatorType *ot);
2.5: Operator naming, reviewed some of the recent changes by Shaul, did some minor tweaks.
2009-04-15 15:40:31 +00:00
void MESH_OT_select_shortest_path(struct wmOperatorType *ot);
editmesh_mods.c op names change
2009-04-12 17:43:43 +00:00
void MESH_OT_vertices_select_similar(struct wmOperatorType *ot);
void MESH_OT_edges_select_similar(struct wmOperatorType *ot);
void MESH_OT_faces_select_similar(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_select_random(struct wmOperatorType *ot);
2.5: Operator naming, reviewed some of the recent changes by Shaul, did some minor tweaks.
2009-04-15 15:40:31 +00:00
void MESH_OT_vertices_transform_to_sphere(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_selection_type(struct wmOperatorType *ot);
editmesh_mods.c op names change
2009-04-12 17:43:43 +00:00
void MESH_OT_loop_multi_select(struct wmOperatorType *ot);
mark and clear seam, set and unset sharp and vertex smoothing is now ctrl/alt 1, 2 and 3 - still a bit vague of op naming
2009-02-04 02:58:21 +00:00
void MESH_OT_mark_seam(struct wmOperatorType *ot);
void MESH_OT_mark_sharp(struct wmOperatorType *ot);
editmesh_mods.c op names change
2009-04-12 17:43:43 +00:00
void MESH_OT_vertices_smooth(struct wmOperatorType *ot);
flip_editnormals is back, alt+3key
2009-02-05 01:32:37 +00:00
void MESH_OT_flip_editnormals(struct wmOperatorType *ot);
edit mesh operators for edit mesh view
2009-01-13 02:09:58 +00:00
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
extern EditEdge *findnearestedge(ViewContext *vc, int *dist);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
extern void EM_automerge(int update);
void editmesh_select_by_material(EditMesh *em, int index);
void righthandfaces(EditMesh *em, int select); /* makes faces righthand turning */
void EM_select_more(EditMesh *em);
2.5 Edit mesh: Separate options back. Use SHIFT+P for it, PKEY has been stolen! :)
2009-01-30 15:01:14 +00:00
void selectconnected_mesh_all(EditMesh *em);
2.5 - Mesh Rip back (Vkey). For those who keep wondering how it works: just put mouse cursor somewhere close to the selection, press V and mouse mouse away from it. Feels like real rip! - Made extrude sorta work, no menu/options yet though. But it does transform! - Added an short event->mval[2] with region coords, easier coding for the guys :) - Fill operator standard delivers 'beauty' now
2009-02-19 19:03:53 +00:00
void faceloop_select(EditMesh *em, EditEdge *startedge, int select);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/**
* findnearestvert
*
* dist (in/out): minimal distance to the nearest and at the end, actual distance
* sel: selection bias
* if SELECT, selected vertice are given a 5 pixel bias to make them farter than unselect verts
* if 0, unselected vertice are given the bias
* strict: if 1, the vertice corresponding to the sel parameter are ignored and not just biased
*/
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
extern EditVert *findnearestvert(ViewContext *vc, int *dist, short sel, short strict);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_tools.c */
#define SUBDIV_SELECT_ORIG 0
#define SUBDIV_SELECT_INNER 1
#define SUBDIV_SELECT_INNER_SEL 2
#define SUBDIV_SELECT_LOOPCUT 3
void join_triangles(EditMesh *em);
int removedoublesflag(EditMesh *em, short flag, short automerge, float limit); /* return amount */
2.5 From the anti-globalization department: G.obedit terminated! Wherever possible, use CTX_data_edit_object(C) to get this now. It's stored in scene now, and the screen context has it defined.
2009-01-02 19:10:35 +00:00
void esubdivideflag(Object *obedit, EditMesh *em, int flag, float rad, int beauty, int numcuts, int seltype);
added error reporting to edit mesh
2009-02-14 21:31:34 +00:00
int EdgeSlide(EditMesh *em, wmOperator *op, short immediate, float imperc);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
added ops for subdivide, subdiv multi, subdiv smooth, subdiv fractal
2009-01-16 04:48:33 +00:00
void MESH_OT_subdivide(struct wmOperatorType *ot);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void MESH_OT_subdivs(struct wmOperatorType *ot);
added ops for subdivide, subdiv multi, subdiv smooth, subdiv fractal
2009-01-16 04:48:33 +00:00
void MESH_OT_subdivide_multi(struct wmOperatorType *ot);
void MESH_OT_subdivide_multi_fractal(struct wmOperatorType *ot);
void MESH_OT_subdivide_smooth(struct wmOperatorType *ot);
2.5: Operator naming, reviewed some of the recent changes by Shaul, did some minor tweaks.
2009-04-15 15:40:31 +00:00
void MESH_OT_remove_doubles(struct wmOperatorType *ot);
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_extrude(struct wmOperatorType *ot);
spin mesh is alt Rkey - ton, please check and advise regarding screw_mesh and defaults. F3 fails while pressed continuously
2009-02-16 20:04:01 +00:00
void MESH_OT_spin(struct wmOperatorType *ot);
working yet preliminary (like everything) screw mesh. in irc there was a discussion about setting the screw axis outside of the function, but someone else should do that.
2009-02-18 03:01:45 +00:00
void MESH_OT_screw(struct wmOperatorType *ot);
editmesh face menu back, ctrl-pkey
2009-01-24 22:21:12 +00:00
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_fill(struct wmOperatorType *ot);
editmesh face menu back, ctrl-pkey
2009-01-24 22:21:12 +00:00
void MESH_OT_beauty_fill(struct wmOperatorType *ot);
2.5: Operator naming, reviewed some of the recent changes by Shaul, did some minor tweaks.
2009-04-15 15:40:31 +00:00
void MESH_OT_quads_convert_to_tris(struct wmOperatorType *ot);
void MESH_OT_tris_convert_to_quads(struct wmOperatorType *ot);
editmesh face menu back, ctrl-pkey
2009-01-24 22:21:12 +00:00
void MESH_OT_edge_flip(struct wmOperatorType *ot);
- Converted mesh face popup menu to use brecht's toolbox function (like the image view toolbox) Rather then having a hard coded popup menu with events that call other operators exec functions, operator names are given to the toolbox where it displays the operator name and shortcut. This means the real operator is registered rather then the one that called it. Im not sure about the location for the operator though, at the moment its called VIEW3D_OT_editmesh_face_toolbox() in view3d_header.c since the image editor toolbox is in the header file too. In a way it makes sense because this menu should eventually be in the header. - Change shortcut to Ctrl+F as it is in 2.4x - Added a number of operators that were not being registered - MESH_OT_fill_mesh, beauty_fill, convert_quads_to_tris, convert_tris_to_quads, edge_flip, mesh_set_smooth_faces, mesh_set_solid_faces - Renamed redundant MESH_OT_mesh_set_smooth_faces() to MESH_OT_faces_shade_smooth(), same for solid.
2009-02-01 04:22:18 +00:00
void MESH_OT_faces_shade_smooth(struct wmOperatorType *ot);
void MESH_OT_faces_shade_solid(struct wmOperatorType *ot);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void MESH_OT_split(struct wmOperatorType *ot);
edit_tools ops - starting from 4key up to 8key, ctrl and alt. ton: please check if working (especially uv and color functions)
2009-02-07 23:20:36 +00:00
void MESH_OT_extrude_repeat(struct wmOperatorType *ot);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void MESH_OT_edge_rotate(struct wmOperatorType *ot);
edit_tools ops - starting from 4key up to 8key, ctrl and alt. ton: please check if working (especially uv and color functions)
2009-02-07 23:20:36 +00:00
void MESH_OT_loop_to_region(struct wmOperatorType *ot);
void MESH_OT_region_to_loop(struct wmOperatorType *ot);
editmesh_tools.c op name change
2009-04-12 17:54:07 +00:00
void MESH_OT_uvs_rotate(struct wmOperatorType *ot);
void MESH_OT_uvs_mirror(struct wmOperatorType *ot);
void MESH_OT_colors_rotate(struct wmOperatorType *ot);
void MESH_OT_colors_mirror(struct wmOperatorType *ot);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
made some mesh operator names and values more consistent with object mode + other minor changes. - percentage -> percent, and always a float. - renamed selectconnected to select_linked - removed _mesh prefix for MESH_OT_* operators. - renamed select_swap -> select_invert (matching object and sequencer operators)
2009-02-01 12:40:27 +00:00
void MESH_OT_delete(struct wmOperatorType *ot);
2.5 - Mesh Rip back (Vkey). For those who keep wondering how it works: just put mouse cursor somewhere close to the selection, press V and mouse mouse away from it. Feels like real rip! - Made extrude sorta work, no menu/options yet though. But it does transform! - Added an short event->mval[2] with region coords, easier coding for the guys :) - Fill operator standard delivers 'beauty' now
2009-02-19 19:03:53 +00:00
void MESH_OT_rip(struct wmOperatorType *ot);
delete menu is back DKEY. seperating may be needed to delete_mesh
2009-01-31 02:31:58 +00:00
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
#endif // MESH_INTERN_H
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
Copy Permalink