Used to be https://archive.blender.org/developer/D17123.
Internally these are already using the same code path anyways, there's no point in maintaining two distinct nodes.
The obvious approach would be to add Anisotropy controls to the Glossy BSDF node and remove the Anisotropic BSDF node. However, that would break forward compability, since older Blender versions don't know how to handle the Anisotropy input on the Glossy BSDF node.
Therefore, this commit technically removes the Glossy BSDF node, uses versioning to replace them with an Anisotropic BSDF node, and renames that node to "Glossy BSDF".
That way, when you open a new file in an older version, all the nodes show up as Anisotropic BSDF nodes and render correctly.
This is a bit ugly internally since we need to preserve the old `idname` which now no longer matches the UI name, but that's not too bad.
Also removes the "Sharp" distribution option and replaces it with GGX, sets Roughness to zero and disconnects any input to the Roughness socket.
Pull Request: blender/blender#104445
A recent change from [0] added an assert when a string lookup was
performed on a collection item with no name-property,
but silently failed with release builds.
This isn't correct in a couple of ways.
The assert makes it seem like the RNA API needs to be updated when
it's in fact valid to have collection items without a name-property.
It also misleads script authors to silently fail since it implies a
key that exists would return a result.
Raise a TypeError exception when string lookups are attempted on
collections that don't support them.
This change also applies to get() & __contains__().
[0]: 5bb3a3f157
This happens when the collection's item type doesn't have a
'nameproperty' to index with. For debug builds we error out with an
assert, since in general this shouldn't happen. For release builds
Python will report item not found.
Pull Request: blender/blender#107086
`PyObject_GetBuffer` was used without checking that it was successful.
This could cause the code to access an incompatible or uninitialized
`Py_buffer`.
Add the missing checks, and clears the raised `PyExc_BufferError`
to silently fall back to accessing the PyObject as a sequence.
Add a filepath argument to load/save pre/post.
Also add save_post_failed and load_post_failed handlers so it's always
possible to for the pre handlers to run a matching post action.
This makes it possible to know the filepath of the blend file mean
loaded/saved as well as supporting running an action when load/save
operations fail.
When loading and saving the startup-file, the path argument is set to
an empty string.
Details:
New RNA types were added to support storing primitive values in
PointerRNA. Primitive{String/Int/Float/Boolean}RNA. These will likely
only be used in some limited cases, in the case of BKE_callback_exec it
allows strings to be included as part of the PointerRNA **pointers
argument.
Ref !104769.
Names such as `dummyult` and `dummyet` didn't read very well,
underscore separate these names.
Also rename some variables that used old conventions which missed
being updated (`mpr` for manipulator instead of `gz` for gizmo).
Use a consistent style for declaring the names of struct members
in their declarations. Note that this convention was already used in
many places but not everywhere.
Remove spaces around the text (matching commented arguments) with
the advantage that the the spell checking utility skips these terms.
Making it possible to extract & validate these comments automatically.
Also use struct names for `bAnimChannelType` & `bConstraintTypeInfo`
which were using brief descriptions.
The new Xcode 14.1 brings the new Apple Clang compiler which
considers sprintf unsafe and geenrates deprecation warnings
suggesting to sue snprintf instead. This only happens for C++
code by default, and C code can still use sprintf without any
warning.
This changes does the following:
- Whenever is trivial replace sprintf() with BLI_snprintf.
- For all other cases use the newly introduced BLI_sprintf
which is a wrapper around sprintf() but without warning.
There is a discouragement note in the BLI_sprintf comment to
suggest use of BLI_snprintf when the size is known.
Differential Revision: https://developer.blender.org/D16410
Function casts hid casting between potentially incompatible type
signatures (using int instead of Py_ssize_t). As it happens this seems
not to have caused any bugs on supported platforms so this change is
mainly for correctness and to avoid problems in the future.
Missed these changes in [0].
Also replace designated initializers in some C code, as it's not used
often and would need to be removed when converting to C++.
[0] e555ede626
Use struct identifiers in comments before the value.
This has some advantages:
- The struct identifiers didn't mix well with other code-comments,
where other comments were wrapped onto the next line.
- Minor changes could re-align all other comments in the struct.
- PyVarObject_HEAD_INIT & tp_name are no longer placed on the same line.
Remove overly verbose comments copied from PyTypeObject (Python v2.x),
these aren't especially helpful and get outdated.
Also corrected some outdated names:
- PyTypeObject.tp_print -> tp_vectorcall_offset
- PyTypeObject.tp_reserved -> tp_as_async
Mathutils types were always GC tracked even when it wasn't intended.
Not having to track objects speeds up Python execution.
In an isolated benchmark created to stress test the GC
creating 4-million vectors (re-assigning them 100 times), this gives
an overall ~2.5x speedup, see: P3221.
Details:
Since [0] (which added support for sub-classed mathutils types)
tp_alloc was called which defaults to PyType_GenericAlloc which always
GC tracked the resulting object when Py_TPFLAGS_HAVE_GC was set.
Avoid using PyType_GenericAlloc unless the type is sub-classed,
in that case the object is un-tracked.
Add asserts that the tracked state is as expected before tracking &
un-tracking, to ensure changes to object creation don't cause objects
to be tracked unintentionally.
Also assign the PyTypeObject.tp_is_gc callback so types optionally GC
track objects only do so when an object is referenced.
[0]: fbd9364944
Invalidate depsgraph.object_instances when freed, this resolves a crash
when accessing the object instances after iteration has finished.
Unlike most other collections, object_instances is only valid while the
iterator is in-memory.
The Python/RNA API needs to inline int/string collection lookups so the
Python instance can be created before the iterator ends.
Reviewed By: mont29, sergey
Ref D15755
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
Regression caused by [0] that caused the error message to be
created based on a normalized exception (which hid line numbers).
PyC_ExceptionBuffer{_Simple} & BPy_errors_to_report
no longer clears the exception.
This could have been resolved by changing python_script_error_jump
however that would involve changes to reference counting that are more
risky (noted in code-comment).
[0]: 2d2baeaf04
These functions can be used with PyArg_ParseTupleAndKeywords
(and related functions) to take typed RNA arguments without
having to extract and type-check them separately.
No functional changes, extracted from D13126.
With the increased use of multi-character format units and keyword-only
arguments these are increasingly difficult to make sense of.
Split the string onto multiple lines, one per argument.
While verbose it's easier to understand and add new arguments.
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3db we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
