* Now it displays the last report from the global list, not just from operators
* Rather than disappearing when a new operator is run, it stays until it times
out or a new report is added
* Fun animated transitions ;)
http://mke3.net/blender/devel/2.5/reports_header.mov
Now need to investigate report usage with popups. Ideally we can have most
reports non-blocking, so they're less intrusive, only popping up for dire errors.
Problem is many things in Blender right now are marked as RPT_ERROR
when probably RPT_WARNING is more appropriate. Should probably keep
RPT_ERROR for things that demand immediate attention.
Small change to keep the value of H and S when V come to zero, take care
that only work if you keep the color picker open.
When the color picker is closed, the H and S value are reset to zero
this is because the color picker is used in a lot of different place
and this value need to be reset.
(BTW reset to zero only when V is equal to zero!)
- Also made it so sys.stdin isnt overwritten anymore, instead the interactive consoel overwrites while it executes and restores after.
- removed hope folder from sphinx patch path
After talking with Brecht he agreed on allowing Esc to be used as input for key input butons.
In order to let the user to cancel an input it can cancel it clicking outside the button.
Also replacing manual check by ui_mouse_inside_button in ui_text function
(patch reviewed (and helped) by Matt (but the change on ISHOTKEY, that's on my own risk ;))
Now, rather than the bit-too-alarming stop sign, threaded wmJobs
display a progress indicator in the header. This is an optional feature
for each job type and still uses the same hardcoded ui template
(could use further work here...).
Currently implemented for:
Render - parts completed, then nodes comped
Compositor - nodes comped
Fluid Sim - frames simulated
Texture Bake - faces baked
Example: http://mke3.net/blender/devel/2.5/progress.mov
*The narrowui value was hard coded in all ui scripts, made an user preferences option. Basically this value determines on which area width, it should switch between dual/single column layout.
ToDo: The Changes only take effect when reloading scripts/restarting Blender (after saving as default). Will maybe add the "Reload Scripts" operator next to the button in the future.
* Small fix for Fluid Add Button, when in single column mode. Didn't expand like the other "Add" Buttons.
Note: This is yet another problem that results from the fact that the icon/preview in file browser is now a button rather than just drawn as an image. (Similar to LEFMOUSE not working in filebrowser). This should be checked on as the fix might cause issues in the future when using image drag buttons in other parts of Blender.
* Slight alignment change in header, to match modifiers box a bit better. Basically the "name" filed expands with the size of the properties panel now, which looks better imho.
* Code cleanup: Removed some old drawing functions, and the Python Constraint UI Code, which was not functional anyway.
tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
While I was looking in outliner.c, made some changes to let extra passes display
there such as environment (commented out before due to a previous limitation).
Also changed outliner object visbility/selectability/renderability toggles to use
RNA buttons so you can insert keyframes with RMB menu etc.
Curve->lastselbp field was renamed to Curve->lastsel and now not last
either BPoint or BezTriple is storing here. It's not easy to determine
type of selected point, but operator which depends on such point reviews
the full nurbs, so this shouldn't be a problem.
Made changes to curve undo stuff to restore last selected point on undo/redo.
Added new theme color for curve last selected point.
This commit puts the ground work in place, swapping out the crusty old Logic Editor
UI code for the new RNA-based layout engine. It's disabled with ifdefs at the moment
because it's incomplete, but Dalai can now do the grunt work to fill it all out and get it running.
Also includes a bug fix to LINK buttons, and two new logic operators to add and delete sensors.
Dalai, just switch the #if 0 and #if 1 in logic_window.c:3412 and 3469
Currently for ColorBands, when pressing the Add button, new elements are
set with a medium gray in a medium position which often is not desired
behaviour.
This patch when possible sets new elements as averaged values between
the current element and its preceding neighbour
[#20854] PROPERTIES STAMP: Rendering stamp flickers in output renders
Blenfont was not thread safe, that is why one thread can change
the font properties (size, dpi, color, etc) at the same time
that the stamp draw on the image, and then the problem.
To make blenfont thread safe I have to change two important things:
1) Every BLF_* function take one argument, the font id.
2) We have two new function to make font "thread safe":
BLF_load_unique
BLF_load_mem_unique
This two function are for case like stamp, that need and own font
that don't share the glyph cache, so can draw without problem
in a different thread.
Why the BLF_*_unique function ?
Because blenfont keep only one copy of a font and keep a list of
"glyph cache". Every glyph cache have size and dpi, so if two
different thread access the same font at the same time, they can
change value and finish with something like the stamp problem.
Why don't remove the glyph cache ?
Because if we do that, we finish with a font object for every size
and dpi, and the stamp is really a special case that happen in
the rendering process, so I really thing is better keep the
glyph cache and make this two new function to handle this
special case.
(When I say "font object" I mean have the same freetype font multiple
times just to have differents size and dpi)
As Matt point we still can have one case that two thread access
the BLF_*_unique function at the same time, but I am looking to
fix this with some class of thread lock.
For now I test and work fine, so if some one found problem, please
let me know.
Campbell I have to change the python api (python/generic/blf_api.c)
to the new syntax, so maybe you can take a look at this.
Previously all modifier operators relied on the buttons layout data context pointer to
decide which modifier to work on. This meant that these operators would only work
from from the properties panel, and not from scripting/macros or for operator redo.
This commit makes all modifier operators take the modifier name as an operator
property, so the operators can be re-done or executed outside of the modifier panel.
When invoking the operators from the modifier panel, they automatically fill in the
operator property from context.
This isn't a perfect API design, but it does bring these operators in line with the design
of being able to access all UI functionality via other means like scripts.
* Division by zero fix for TNT SVD code.
* Sound fix, in case ffmpeg decode fails, don't use the samples.
* Fix for incorrect bounds of transformed objects in new raytracing code.
* Gave memory arena's a name used for allocations for easier memory
usage debugging.
* Dupligroup no_draw option was using layers but not restrict view/render
setting. (not a bugfix exactly but would do display list context switching
while drawing for no reason).
* Fix objects instanced on hair particles not giving consistent results
when the object is transformed.
* New math functions: madd_v4_v4fl, len_squared_v3v3, interp_v4_v4v4v4,
mul_v4_m4v4, SH and form factor functions, box_minmax_bounds_m4.
* mul_m4_m4m4 and mul_m3_m3m3 now accept the same pointers for multiple
arguments.
* endjob callback for WM jobs system.
* Geometry node uv/color layer now has search list/autocomplete.
* Various small buildsystem tweaks, not strictly needed yet in trunk.
by Xavier Thomas
This adds the waveform monitor and vectorscope to the image editor 'scopes'
region, bringing it inline (plus a bit more) with sequence editor functionality,
and a big step closer to the end goal of unifying the display code for image/
comp/sequence editor. It's non-intrusive, using the same code paths as
the histogram.
There's still room for more tweaks - I modified the original patch, changing
the openGL immediate mode drawing of the waveform display to vertex arrays for
speed optimisation. Xavier can look at doing this for the vectorscope now too.
Thanks very much Xavier!
