This is a missing part of the Metal backend. Metal backend doesn't
support the bgl commands, but it was not possible to use the gpu
module to use scissor testing.
Without this change addon developers would not be able to migrate
their addons to support the Metal backend.
This patch adds:
- `gpu.state.scissor_set`
- `gpu.state.scissor_get`
- `gpu.state.scissor_test_set`
Fix#104911
Texture clamping is by default off, but for VDM textures this leads
to several artifacts.
- Clamping is done when the image is sampled and when the brush strenght
is applied.
- VDM textures have negative values that are lost due to clamping
when clamping during sampling.
This patch fixes this by changing the default clamping of newly
created textures to not clamp anymore.
Textures are mostly being used by sculpt brushes, where clamping is also
implemented on brush level.
Fix#104747
Regression in [0] which caused interacting with 2D gizmos not to
update 3D gizmos once the gizmo finished it's modal interaction.
This caused the cameras lens gizmo not to update when navigating using
the viewport navigation buttons.
Resolve by detecting this case and flagging other draw steps to be
updated.
[0]: fb27a9bb98
In the first loop is safe to remove the current element.
The second loop can remove any element, potentially the next.
This triggers a read after freed.
Pull Request #104897
When the new UV to legacy format conversion happens, the mesh is in
the middle of being written and is an at best "complicated", at worst
invalid state. The attribute API looks at other domains and is a bit
less forgiving in that respect, and shouldn't really be used here. Use
the CustomData API instead. Also sort the layers the same way as
b642dc7bc7.
Note that the node group has its sockets names translated, while the
built-in nodes don't. So we need to use data_ for the built-in nodes
names, and the sockets of the created node groups.
Pull Request #104889
This reverts commit 68181c2560.
I merged 3.6 into 3.5 by mistake. Basically I had a PR against main,
then changed it in the last minute to be against 3.5 via the
web-interface unaware that I shouldn't do it without updating the
patch.
Original Pull Request: #104889
Note that the node group has its sockets names
translated, while the built-in nodes don't.
So we need to use data_ for the built-in nodes names,
and the sockets of the created node groups.
Pull Request #104889
When updating a mesh, the GPU Subdivision code makes calls to
`GPU_indexbuf_bind_as_ssbo()`.
This may cause the current VAO index buffer to change due to calls from
`glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, ibo_id_)` in
`GPU_indexbuf_bind_as_ssbo()`.
The solution is to unbind the VAO (by calling `glBindVertexArray(0)`)
before creating the index buffer IBO.
Co-authored-by: Germano Cavalcante <grmncv@gmail.com>
Pull Request #104873
Apparently, the 65bit Intel architecture is presented differently
on Linux and Windows.
Allow both variants for the command line, so that semantically the
command line argument can be seen as a lower case platform.machine.
Possible values are x86_64 and arm64.
Allows to use make_update.py in a cross-compile environment, like
building x86_64 macOS Blender from Apple Silicon machine.
Pull Request #104863
Fix a crash when using the Euler Filter from the Graph Editor on baked curves.
The crash happened because baked curves have no bezt array.
Skipping any curves where that was missing fixes the issue.
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104858
According to the report it is a regression since 3.2, but it is tricky
to pin-point which exact commit caused it.
The root of the issue is that under certain circumstances frame might
be read and processed twice, depending on the order in which panels and
the main area is drawn: the footage information panel skips cache, so
it it is drawn prior to the main area it leads to 2 frame reads. Opening
the Metadata panel triggers code path which forces frame to be put to
the cache, solving the double frame read.
Solution is simple: do not skip cache when acquiring image buffer for
the footage information: the same frame will be needed for the main
area as well.
Pull Request #104860
On a user level there are no expected changes, other than being able
to update submodules and libraries from a main repository at a detached
HEAD situation (which did not work before).
On the infrastructure level of things this moves us closer to ability
to use the main make_update.py for the buildbot update-code stage, and
to remove the update-code section from the pipeline_config.yaml.
The initial idea of switching make_update to the pipeline config did
not really work, causing duplicated work done on blender side and the
buildbot side. Additionally, it is not easy to switch make_update.py
to use pipeline_config.yaml because the YAML parser is not included
into default package of Python.
There will be few more steps of updates to this script before we can
actually clean-up the pipeline_config: the changes needs to be also
applied on the buildbot side to switch it to the actual make_update.
Switching buildbot to the official make_update.py allows to much more
easily apply the submodules change as per #104573.
This was broken even before 0649e63716 and was always expanding the
`Image`, not the movie clip (even if the source was set to
`CAM_BGIMG_SOURCE_MOVIE`)
Now the rule here seems to be to always expand unconditionally, so
remove checking the source and always expand image and movie clip.
Co-authored-by: Philipp Oeser <philipp@blender.org>
Pull Request #104815
Cycles uses the "split faces" mesh function to support sharp edges
and auto-smooth. However, 75ad8da1ea updated that
function to ignore the edges that are explicitly tagged as sharp and
only use the edge angle. Fix by taking the attribute into account too.
The custom data layer mappings from dfacaf4f40 were created
*before* the BMesh shape key layers were added, invalidating the BMesh
data offsets they stored. Fix by creating the mappings after all layers
have been created.
Clean up logic to make it more clear and formalize the way to choose
fixed node data type based on operation. This make possible to more
easily fix wrong node data type for color type and less than ops.
Pull Request #104617
When appending assets it often isn't expected for the asset tags and
meta-data to be included. Add an option to the append operator to
disable appending the asset data, exposing existing internal options.
When the users click the "Mark as Asset" with the mouse hover the fake
user button, the button was not refreshed. In fact, the areas are not
listening to the "NC_ID NA_EDITED", which is the signal emitted after
an asset is marked/unmarked. Because of this, the areas aren't redrawn
(especially the ID buttons).
This little patch adds the event listening for the areas where this
problem is happening node editor and properties editor.
Pull Request #104694
* Fix#92539: Hard to read the breadcrumbs.
* Fix View Item active, hover, and text color (e.g. count numbers in the
Spreadsheet were almost unreadable).
* Fix mismatching node type colors with the default theme.
Blender Light is meant to be simply a brighter version of the default,
so screenshots and tutorials can be followed with both themes.
* Use the same outline color for widgets, so they match when aligned in a row.
* Make panels standout (not fully transparent), like in the default theme.
The active tools in `_defs_curves_sculpt` don't use names that are
exactly the same as the corresponding brush name with "builtin_brush."
at the beginning, instead they use more standard identifiers without
capitals or spaces.
The "brush_select" utility operator assumed the names matched though.
That can be fixed by manually mapping the brushes to the active tools.
Pull Request #104792
The keymap name in `WM_keymap_guess_from_context` didn't match the
name of the keymap in the Blender default keymap (`km_sculpt_curves`).
Fix by changing the utility function to match the keymap name.
Before right clicking on any tool in curves sculpt mode gave an assert,
now it shows a context menu.
Pull Request #104791
Lookup cache was not invalidated, to update attached effects position, a handle
of a input strip is touched.
To update attached effects, currently the code only does that when strip
position is changed. This is, because effect strip updating is done internally
in sequencer module code and ideally shouldn't be done at all. A TODO comment
with further explanation is added.
Avoid running out of attributes when multiple material slots use the same one.
Cleanup:
Removes the return value from drw_attributes_add_request since it shouldn't be modified afterward and it's never used.
Avoid making copies of DRW_AttributeRequest in drw_attributes_has_request.
Co-authored-by: Miguel Pozo <pragma37@gmail.com>
Pull Request #104709
The evaluated positions cache can live longer than a specific
`CurvesGeometry`, but for only-poly curves, it pointed to the positions,
which are freed when the curves are. Instead, use the same pattern
as the evaluated offsets and don't store the positions span, just return
it when retrieving evaluated positions.
Since the menu doesn't automatically align the labels like other menus
and pulldowns in Blender, I manually made them align using the blank
icon. However the menu button would also include this blank icon now.
This is a specific fix for the 3.5 release. In the main branch I will
replace it with proper support for automatically aligning labels in such
menus.
* BLENDER_VERSION_CYCLE set to beta
* Update pipeline_config.yaml to point to 3.5 branches and svn tags
* Update and uncomment BLENDER_VERSION in download.cmake
Usually when a menu item displays an icon, we indent all other items
with an empty icon so items align nicely. Now with more built-in asset
libraries (the new "Essentials" library), this inconsistency becomes
more apparent.
Also add a separator line between the "All" asset library and the
others, makes the menu look more organized.
The Preferences for asset libraries are becoming more than a simple name
+ path. E.g. there is now an Import Method options, and we previously
also considered a Relative Paths option (which we may still want to
add). The previous UI, while consistent with the Auto Run Python Scripts
UI isn't well suited for less than trivial cases. Using UI lists makes
the UI more scalable and follows usual list UI patterns more. There is
also more space for the path button now.
Part of #104686.
The default import method for an asset library can now be determined in
the Preferences. The Asset Browser has a new "Follow Preferences" option
for the importing. The essentials asset library still only uses "Append
(Reuse Data)".
This is part of #104686, which aims at improving the import method
selection, especially for the introduction of the new essentials library
(which doesn't support certain import methods). Further changes are
coming to improve the UI, see #104686.
Pull Request: #104688
The quick fur operator now uses the new hair system. It adds a new
curves object for every selected mesh, and adds geometry nodes
modifiers from the essentials assets that generate curves. A few
settings are exposed in the redo panel, including an option for whether
to apply the modifier to generate the initial curves so that there is
original editable data.
The point of the operator is to give people a sense of how to use the
node groups and to give a very fast way to build a basic setup for
further tweaking.
Pull Request #104764
Use the right hand side selection, as it fits the typical workflow
the best.
Arguably, the same would need to be done for the k-shortcut, but
that is another issue to be tackled. As well as making the selection
active.
Pull Request #104777
We (Dalai, Hans, Falk, Simon and me) decided that the curves edit mode
is useful enough to justify moving it out of experimental now. So far it
supports the following features:
* Various selection tools. The selections are synced with sculpt mode.
* Transform tools.
* Delete curves/points.
More functionality of the old curve edit mode will be ported over in
future releases.
