active paint slot
When changing to another texture paint slot, the texture displayed in
the viewport changes accordingly (as well as the image displayed
in the Image Editor).
When changing the active texture in the Node Editor though, only the
texture displayed in the viewport changes.
This _can_ be confusing because you can end up painting on a texture
that you are not looking at in the viewport (so you dont have any
feedback whatsoever). Not 100% sure this is desired in all scenarios,
but this change makes it so that the active paint slot changes to the
one that uses the texture we chaged to in the Node Editor (keeping them
in sync).
If this is not desired in all cases, this could be made an option.
ref T88788
ref D11496
Maniphest Tasks: T88788
Differential Revision: https://developer.blender.org/D11497
Caused by {rBf3bf87e5887c}.
When using a GPencil Time Offset Modifier, the bGPDlayer>actframe can be
NULL. This can be determined though, but above optimization commit
skipped getting the active frame in this case entirely (with the
intention to only get it if framenumbers did not match).
Now also call BKE_gpencil_layer_frame_get() if actframe is NULL in order
to fetch a valid one if present.
Maniphest Tasks: T91060
Differential Revision: https://developer.blender.org/D12355
Run into it when was re-working tiles in the Cycles X project.
Make sure the storage of highlighted tiles is emptied when the
render is finished or cancelled).
The error is only possible to happen if the engine did not do
something correct, but is still good to deal with such situations
more gracefully.
Steps to reproduce:
- enable Extended Asset Browser
- open a regular File Browser
gives:
"rna_uiItemR: property not found: FileSelectParams.asset_category"
Now do proper poll.
Differential Revision: https://developer.blender.org/D12350
When the object display type was set to wireframe or boundbox the depth
buffer wasn't updated resulting in not visible weightpaint overlay.
Thanks to Demeter Dzadik for mentioning it.
Support axis constraints for the measure tool.
Press X, Y or Z to restrict the dimension to that axis,
it's also possible to toggle between orientations matching transform.
Reviewed By: campbellbarton
Ref D10872
This commit fixes editing the value of a list of strings custom property
with the "Custom Property Edit" operator. This sort of custom property
isn't very well supported in general, but editing the values should
work properly anyway.
Differential Revision: https://developer.blender.org/D12348
Use context members instead of not working well or failing due to:
- Missing "path" functions (in the case of edit-bones).
- Paths containing names (in the case of sequence-strips or pose-bones).
While technically correct it's not useful for shortcuts or
menu items to lookup data by name.
Only append RNA_path_from_ID_to_struct to context attributes if those
paths resolve to ID types.
Also simplify creating RNA paths by adding utility functions:
- WM_context_path_resolve_property_full
- WM_context_path_resolve_full
Part of fix for T90723.
Selection was already accessible but not active.
Add utility functions:
- ANIM_nla_context_track to access the active track,
following the convention of ANIM_nla_context_strip.
- ANIM_nla_context_*_ptr versions of these functions,
needed to for creating context members to access the ID pointer.
Part of fix for T90723.
Math implemented in 929d7597b3 was incorrect, but also inconsistent
with previous behavior.
`SEQ_SPEED_STRETCH` should change length only when right handle is
moved. This is now documented in code.
API function `move_to_meta` should move strips without changing context
data like `MetaStack` that tells UI which meta strip should be
displayed and operated upon.
`SEQ_time_update_sequence` relied on `MetaStack` to update meta strip
content length. Instead of changing function `SEQ_time_update_sequence`,
use function `SEQ_time_update_meta_strip_range` directly. This is
because caller would have to be aware of parent meta strip that needs
update anyway.
This is an alternative to context.scene.sequence_editor.active_strip
which could be verbose, especially with additional None checks.
Part of fix for T90723, extracted from D12297.
Previously, built-in nodes had to implement "socket templates"
(`bNodeSocketTemplate`) to tell Blender which sockets they have.
It was nice that this was declarative, but this approach was way
too rigid and was cumbersome to use in many cases.
This commit starts to move us away from this rigid structure
by letting nodes implement a function that declares the sockets
the node has. Right now this is used as a direct replacement
of the "socket template" approach to keep the refactor smaller.
It's just a bit easier to read and write.
In the future we want to support more complex features like
dynamic numbers of sockets and type inferencing. Those features
will be easier to build on this new approach.
This new approach can live side by side with `bNodeSocketTemplate`
for a while. That makes it easier to update nodes one by one.
Note: In `bNodeSocketTemplate` socket identifiers were made
unique automatically. In this new approach, one has to specify
unique identifiers manually (unless the name is unique already).
Differential Revision: https://developer.blender.org/D12335
Now if the frame does not exist in destination layer, the frame type of merge layer is used.
For existing frames in destination layer, the existing type is not changed.
This node takes a curve geometry input and creates a filled mesh at Z=0
using a constrained Delaunay triangulation algorithm. Because of the
choice of algorithm, the results should be higher quality than the
filling for 2D curve objects.
This commit adds an initial fairly simple version of the node, but more
features may be added in the future, like transferring attributes when
necessary, or an index attribute input to break up the calculations
into smaller chunks to improve performance.
Differential Revision: https://developer.blender.org/D11846
This mesh primitive enhances the Cube mesh primitive and allows the
creation of a cuboid with a configurable size and number of vertices
in all 3 directions. The Cube primitive is now similar to the Grid
primitive except that it works in 3 dimensions.
Previously it was possible to create a cube and scale it arbitrarily
along each axis. You could also subdivide the mesh, but the number of
subdivisions was equal along all axes. This meant that making the basic
frame for something like modular buildings wasn't trivial.
Inspired by tutorials and files for modular building creation.
The cuboid is created as a `Mesh` so that large meshes with millions of
faces are created quickly. Though edge calculation could be faster if
implemented here, edges are calculated using `BKE_mesh_calc_edges`
to reduce complexity, and in hopes that they may be calculated lazily
for `Mesh` in the future like vertex normals.
See the differential revision for more information.
Differential Revision: https://developer.blender.org/D11810
This commit allows setting the number of vertices in either direction
to 1, so that the primitive grid node will create a line instead of a
grid. To avoid confusion the soft limits of the input sockets are not
changed, so this is purely an increase in flexibility for when it is
helpful.
Differential Revision: https://developer.blender.org/D11772
The outer edges created om the circle mesh primitive node
weren't marked with the flags that makes them show in wireframe
mode.
Differential Revision: https://developer.blender.org/D12152
This function was documented to return the length but returned an
error value for WIN32. While this doesn't cause any bugs at the moment,
it could cause problems in the future.
Oversight in 5496d8cd36.
Besides helping to avoid buffer overflow errors this reduces complexity
of BLI_str_utf32_as_utf8 which needed a special loop for the last 6
characters to avoid writing past the buffer bounds.
Also add BLI_str_utf8_from_unicode_len which only returns the length.
This was added in b24712a9ca
but is no longer needed as of efc129bc82.
Further, this wasn't reliable as it could fail on linked library data
which has a different base directory.
Assert when blend file relative paths are passed to BLF
(matching imbuf file loading).
The default float IDProperty min value rB8b9a3b94fc148d19 for when there
is no UI data was FLT_MIN instead of -FLT_MAX, which meant that animated
custom property values couldn't be less than zero unless they had their
UI data values edited previously.
That's a mistake I won't make again! Also change the int minimums from
-INT_MAX to INT_MIN to sanitize the whole situation.
This patch just clamps and rounds node contents and socket locations
so they don't appear to jiggle around when you move them. This issue
happens because node sizing and positioning are in floats while text
content must be pixel-aligned.
See D11684 for more details and comparisons.
Differential Revision: https://developer.blender.org/D11684
Reviewed by Julian Eisel
The overlay was drawn twice on top of each other making it hard to see,
hard to theme, and making it more prominent in the wrong areas (before
frame 0, not even start frame). The comment in the code was also wrong
since it said "frame one" but it was 0.
Checked with the Animation module team that it's better to use start/end
frame range instead of frame 0.
There is a TODO note to de-duplicate this section eventually so I left it there.
This fix is currently done for Grease Pencil and Mask modes, but it should
also be fixed for the regular Dopesheet mode (in line 244 if anyone wants to do it).
The storage of IDProperty UI data (min, max, default value, etc) is
quite complicated. For every property, retrieving a single one of these
values involves three string lookups. First for the "_RNA_UI" group
property, then another for a group with the property's name, then for
the data value name. Not only is this inefficient, it's hard to reason
about, unintuitive, and not at all self-explanatory.
This commit replaces that system with a UI data struct directly in the
IDProperty. If it's not used, the only cost is of a NULL pointer. Beyond
storing the description, name, and RNA subtype, derived structs are used
to store type specific UI data like min and max.
Note that this means that addons using (abusing) the `_RNA_UI` custom
property will have to be changed. A few places in the addons repository
will be changed after this commit with D9919.
**Before**
Before, first the _RNA_UI subgroup is retrieved the _RNA_UI group,
then the subgroup for the original property, then specific UI data
is accessed like any other IDProperty.
```
prop = rna_idprop_ui_prop_get(idproperties_owner, "prop_name", create=True)
prop["min"] = 1.0
```
**After**
After, the `id_properties_ui` function for RNA structs returns a python
object specifically for managing an IDProperty's UI data.
```
ui_data = idproperties_owner.id_properties_ui("prop_name")
ui_data.update(min=1.0)
```
In addition to `update`, there are now other functions:
- `as_dict`: Returns a dictionary of the property's UI data.
- `clear`: Removes the property's UI data.
- `update_from`: Copy UI data between properties,
even if they have different owners.
Differential Revision: https://developer.blender.org/D9697
Reason was that the notifier did not set the NS_VIEW3D_SHADING
subtype, which the VR view listens for for a shading update.
In the case of "toggle xray", a notifier was absent altogether.
Add mode to overwrite strips on overlap instead of resolving overlap.
When overlap is created, 3 things can happen:
- On partial overlap, handles of overlapped strip are moved
- On complete overlap with smaller strip, overlapped strip is split
- On complete overlap with larger strip, overlapped strip is removed
This mode can be enabled in header.
Reviewed By: fsiddi, mano-wii
Differential Revision: https://developer.blender.org/D11805
