This reverts commit 19222627c6.
Something went wrong here, seems like this commit merged the main branch
into the release branch, which should never be done.
This reverts commit 68181c2560.
I merged 3.6 into 3.5 by mistake. Basically I had a PR against main,
then changed it in the last minute to be against 3.5 via the
web-interface unaware that I shouldn't do it without updating the
patch.
Original Pull Request: #104889
Note that the node group has its sockets names
translated, while the built-in nodes don't.
So we need to use data_ for the built-in nodes names,
and the sockets of the created node groups.
Pull Request #104889
As described in #95966, replace the `ME_EDGEDRAW` flag with a bit
vector in mesh runtime data. Currently the the flag is only ever set
to false for the "optimal display" feature of the subdivision surface
modifier. When creating an "original" mesh in the main data-base,
the flag is always supposed to be true.
The bit vector is now created by the modifier only as necessary, and
is cleared for topology-changing operations. This fixes incorrect
interpolation of the flag as noted in #104376. Generally it isn't
possible to interpolate it through topology-changing operations.
After this, only the seam status needs to be removed from edges before
we can replace them with the generic `int2` type (or something similar)
and reduce memory usage by 1/3.
Related:
- 10131a6f62
- 145839aa42
In the future `BM_ELEM_DRAW` could be removed as well. Currently it is
used and aliased by other defines in some non-obvious ways though.
Pull Request #104417
There were two errors with the function used to convert face sets
to the legacy mesh format for keeping forward compatibility:
- It was moved before `CustomData_blend_write_prepare` so it
operated on an empty span.
- It modified the mesh when it's only supposed to change the copy
of the layers written to the file.
Differential Revision: https://developer.blender.org/D17210
Struct members loc/size were misleading as they read as if the object
data stored object level transform channels. Rename these to match RNA
with a `texspace_*` prefix to make it clear these struct members only
apply to texture-space transform.
Also rename ME_AUTOSPACE & ME_AUTOSPACE_EVALUATED to
ME_TEXSPACE_FLAG_AUTO & ME_TEXSPACE_FLAG_AUTO_EVALUATED.
Use a consistent style for declaring the names of struct members
in their declarations. Note that this convention was already used in
many places but not everywhere.
Remove spaces around the text (matching commented arguments) with
the advantage that the the spell checking utility skips these terms.
Making it possible to extract & validate these comments automatically.
Also use struct names for `bAnimChannelType` & `bConstraintTypeInfo`
which were using brief descriptions.
Currently you can retrieve a mutable array from a const CustomData.
That makes code unsafe since the compiler can't check for correctness
itself. Fix that by introducing a separate function to retrieve mutable
arrays from CustomData. The new functions have the `_for_write`
suffix that make the code's intention clearer.
Because it makes retrieving write access an explicit step, this change
also makes proper copy-on-write possible for attributes.
Notes:
- The previous "duplicate referenced layer" functions are redundant
with retrieving layers with write access
- The custom data functions that give a specific index only have
`for_write` to simplify the API
Differential Revision: https://developer.blender.org/D14140
Byte colors are generic attributes and are therefore included in
CD_MASK_PROP_ALL. Also clarify the use of vertex groups.
They always have to be propagated since they're displayed in
the spreadsheet, etc.
Move the `ME_SHARP` flag for mesh edges to a generic boolean
attribute. This will help allow changing mesh edges to just a pair
of integers, giving performance improvements. In the future it could
also give benefits for normal calculation, which could more easily
check if all or no edges are marked sharp, which is helpful considering
the plans in T93551.
The attribute is generally only allocated when it's necessary. When
leaving edit mode, it will only be created if an edge is marked sharp.
The data can be edited with geometry nodes just like a regular edge
domain boolean attribute.
The attribute is named `sharp_edge`, aiming to reflect the similar
`select_edge` naming and to allow a future `sharp_face` name in
a separate commit.
Ref T95966
Differential Revision: https://developer.blender.org/D16921
An apostrophe should not be used because it is not a mark of plural,
even for initialisms. This involves mostly comments, but a few UI
messages are affected as well.
Differential Revision: https://developer.blender.org/D16749
Currently the `MLoopUV` struct stores UV coordinates and flags related
to editing UV maps in the UV editor. This patch changes the coordinates
to use the generic 2D vector type, and moves the flags into three
separate boolean attributes. This follows the design in T95965, with
the ultimate intention of simplifying code and improving performance.
Importantly, the change allows exporters and renderers to use UVs
"touched" by geometry nodes, which only creates generic attributes.
It also allows geometry nodes to create "proper" UV maps from scratch,
though only with the Store Named Attribute node for now.
The new design considers any 2D vector attribute on the corner domain
to be a UV map. In the future, they might be distinguished from regular
2D vectors with attribute metadata, which may be helpful because they
are often interpolated differently.
Most of the code changes deal with passing around UV BMesh custom data
offsets and tracking the boolean "sublayers". The boolean layers are
use the following prefixes for attribute names: vert selection: `.vs.`,
edge selection: `.es.`, pinning: `.pn.`. Currently these are short to
avoid using up the maximum length of attribute names. To accommodate
for these 4 extra characters, the name length limit is enlarged to 68
bytes, while the maximum user settable name length is still 64 bytes.
Unfortunately Python/RNA API access to the UV flag data becomes slower.
Accessing the boolean layers directly is be better for performance in
general.
Like the other mesh SoA refactors, backward and forward compatibility
aren't affected, and won't be changed until 4.0. We pay for that by
making mesh reading and writing more expensive with conversions.
Resolves T85962
Differential Revision: https://developer.blender.org/D14365
**Changes**
As described in T93602, this patch removes all use of the `MVert`
struct, replacing it with a generic named attribute with the name
`"position"`, consistent with other geometry types.
Variable names have been changed from `verts` to `positions`, to align
with the attribute name and the more generic design (positions are not
vertices, they are just an attribute stored on the point domain).
This change is made possible by previous commits that moved all other
data out of `MVert` to runtime data or other generic attributes. What
remains is mostly a simple type change. Though, the type still shows up
859 times, so the patch is quite large.
One compromise is that now `CD_MASK_BAREMESH` now contains
`CD_PROP_FLOAT3`. With the general move towards generic attributes
over custom data types, we are removing use of these type masks anyway.
**Benefits**
The most obvious benefit is reduced memory usage and the benefits
that brings in memory-bound situations. `float3` is only 3 bytes, in
comparison to `MVert` which was 4. When there are millions of vertices
this starts to matter more.
The other benefits come from using a more generic type. Instead of
writing algorithms specifically for `MVert`, code can just use arrays
of vectors. This will allow eliminating many temporary arrays or
wrappers used to extract positions.
Many possible improvements aren't implemented in this patch, though
I did switch simplify or remove the process of creating temporary
position arrays in a few places.
The design clarity that "positions are just another attribute" brings
allows removing explicit copying of vertices in some procedural
operations-- they are just processed like most other attributes.
**Performance**
This touches so many areas that it's hard to benchmark exhaustively,
but I observed some areas as examples.
* The mesh line node with 4 million count was 1.5x (8ms to 12ms) faster.
* The Spring splash screen went from ~4.3 to ~4.5 fps.
* The subdivision surface modifier/node was slightly faster
RNA access through Python may be slightly slower, since now we need
a name lookup instead of just a custom data type lookup for each index.
**Future Improvements**
* Remove uses of "vert_coords" functions:
* `BKE_mesh_vert_coords_alloc`
* `BKE_mesh_vert_coords_get`
* `BKE_mesh_vert_coords_apply{_with_mat4}`
* Remove more hidden copying of positions
* General simplification now possible in many areas
* Convert more code to C++ to use `float3` instead of `float[3]`
* Currently `reinterpret_cast` is used for those C-API functions
Differential Revision: https://developer.blender.org/D15982
When creating a new mesh to change it in some way, the active and
default color attribute names should be copied to the new mesh.
Doing that in the generic "copy parameters for eval" function should
cover the vast majority of cases.
Attributes are unifying around a name-based API, and we would like to
be able to move away from CustomData in the future. This patch moves
the identification of active and fallback (render) color attributes
to strings on the mesh from flags on CustomDataLayer. This also
removes some ugliness used to retrieve these attributes and maintain
the active status.
The design is described more here: T98366
The patch keeps forward compatibility working until 4.0 with
the same method as the mesh struct of array refactors (T95965).
The strings are allowed to not correspond to an attribute, to allow
setting the active/default attribute independently of actually filling
its data. When applying a modifier, if the strings don't match an
attribute, they will be removed.
The realize instances / join node and join operator take the names from
the first / active input mesh. While other heuristics may be helpful
(and could be a future improvement), just using the first is simple
and predictable.
Differential Revision: https://developer.blender.org/D15169
Recently a new geometry node for splitting edges was added in D16399.
However, there was already a similar implementation in mesh.cc that was
mainly used to fake auto smooth support in Cycles by splitting sharp
edges and edges around sharp faces.
While there are still possibilities for optimization in the new code,
the implementation is safer and simpler, multi-threaded, and aligns
better with development plans for caching topology on Mesh and other
recent developments with attributes.
This patch removes the old code and moves the node implementation to
the geometry module so it can be used in editors and RNA. The "free
loop normals" argument is deprecated now, since it was only an internal
optimization exposed for Cycles.
The new mesh `editors` function creates an `IndexMask` of edges to
split by reusing some of the code from the corner normal calculation.
This change will help to simplify the changes in D16530 and T102858.
Differential Revision: https://developer.blender.org/D16732
Before f1c0249f34 the material was assigned to the previous
slot rather than the next. Though the behavior is arbitrary, there
is no reason to change it.
Previously, it wouldn't detect the case when one mesh had an attribute
that the other one did not. Not sure if this always was the case or whether
this less strict test was implemented accidentally at some point.
There is a more recent implementation as a geometry node, but this code
is used by RNA and Cycles still. In order to help understand the code
to tell if it can be replaced this makes some small changes:
- Use indexing instead of pointer incrementing
- Add const to unchanged arguments
- Avoid unnecessary indentation
- Use references for expected non-null arguments
A utility function retrieved mesh arrays for every element after
05952aa94d which can be easily avoided. This was used when
building the GPU indices for sculpt mode drawing. In my tests this
saves 0.1ms per PBVH node. There may be very slight improvements
in line art and shrinkwrap as well.
Use the shared cache system introduced in e8f4010611 for the
"looptris" triangulation cache. This avoids recalculation when meshes
are copied but the positions or topology don't change. The most obvious
improvement is for cases like a large meshes being adjusted slightly
with a simple geometry nodes modifier. In a basic test with a transform
node with a 1 million point grid I observed an improvement of 13%, from
9.75 to 11 FPS, which shows that we avoid spending 6ms recalculating
the triangulation of every update.
This also makes the thread safety for the triangulation data use a
more standard double-checked lock pattern, which is nice because we
can avoid holding a lock whenever the cached data is retrieved.
Split from https://developer.blender.org/D16530
As part of T95966, this patch moves loose edge information out of the
flag on each edge and into a new lazily calculated cache in mesh
runtime data. The number of loose edges is also cached, so further
processing can be skipped completely when there are no loose edges.
Previously the `ME_LOOSEEDGE` flag was updated on a "best effort"
basis. In order to be sure that it was correct, you had to be sure
to call `BKE_mesh_calc_edges_loose` first. Now the loose edge tag
is always correct. It also doesn't have to be calculated eagerly
in various places like the screw modifier where the complexity
wasn't worth the theoretical performance benefit.
The patch also adds a function to eagerly set the number of loose
edges to zero to avoid building the cache. This is used by various
primitive nodes, with the goal of improving drawing performance.
This results in a few ms shaved off extracting draw data for some
large meshes in my tests.
In the Python API, `MeshEdge.is_loose` is no longer editable.
No built-in addons set the value anyway. The upside is that
addons can be sure the data is correct based on the mesh.
**Tests**
There is one test failure in the Python OBJ exporter: `export_obj_cube`
that happens because of existing incorrect versioning. Opening the
file in master, all the edges were set to "loose", which is fixed
by this patch.
Differential Revision: https://developer.blender.org/D16504
This assertion function came from when derived normal data was stored
as custom data layers, which made it harder to keep track of whether
it was allocated and propagated. Nowadays it's all relatively easy to
predict, so there's no point in keeping this function around-- it only
makes code longer and more complex looking.
These were redundant for one of a few reasons:
- A call to `BKE_mesh_tag_coords_changed` was correct instead
- A mesh has dirty normals when created from scratch anyway
- The call was redundant with `BKE_mesh_runtime_clear_geometry`
Separate freeing and clearing mesh runtime data in a more obvious way.
This makes it easier to see what data is meant to be cleared on certain
changes, rather than conflating it with freeing all of the runtime
caches.
Also comment and reduce the surface area of the "mesh runtime" API.
The redundancy in some functions made it confusing which one should
be used, resulting in subtle bugs or unnecessary boilerplate code.
Also, now bke::MeshRuntime is able to free all the data it owns by
itself, which makes this area easier to reason about. That required
changing the interface of a few functions to avoid passing Mesh when
they really just dealt with some runtime struct.
With more RAII semantics in the future, more of this manual freeing
will become unnecessary.
Bounding box calculation can be a large in some situations, especially
instancing. This patch caches the min and max of the bounding box in
runtime data of meshes, point clouds, and curves, implementing part of
T96968.
Bounds are now calculated lazily-- only after they are tagged dirty.
Also, cached bounds are also shared when copying geometry data-blocks
that have equivalent data. When bounds are calculated on an evaluated
data-block, they are also accessible on the original, and the next
evaluated ID will also share them. A geometry will stop sharing bounds
as soon as its positions (or radii) are changed.
Just caching the bounds gave a 2-3x speedup with thousands of mesh
geometry instances in the viewport. Sharing the bounds can eliminate
recalculations entirely in cases like copying meshes in geometry nodes
or the selection paint brush in curves sculpt mode, which causes a
reevaluation but doesn't change the positions.
**Implementation**
The sharing is achieved with a `shared_ptr` that points to a cache mutex
(from D16419) and the cached bounds data. When geometries are copied,
the bounds are shared by default, and only "un-shared" when the bounds
are tagged dirty.
Point clouds have a new runtime struct to store this data. Functions
for tagging the data dirty are improved for added for point clouds
and improved for curves. A missing tag has also been fixed for mesh
sculpt mode.
**Future**
There are further improvements which can be worked on next
- Apply changes to volume objects and other types where it makes sense
- Continue cleanup changes described in T96968
- Apply shared cache design to more expensive data like triangulation
or normals
Differential Revision: https://developer.blender.org/D16204
A Loop to poly map was passed as an optional output to the loop normal
calculation. That meant it was often recalculated more than necessary.
Instead, treat it as an optional argument. This also helps relieve
unnecessary responsibilities from the already-complicated loop normal
calculation code.
This commit replaces the `Mesh_Runtime` struct embedded in `Mesh`
with `blender::bke::MeshRuntime`. This has quite a few benefits:
- It's possible to use C++ types like `std::mutex`, `Array`,
`BitVector`, etc. more easily
- Meshes saved in files are slightly smaller
- Copying and writing meshes is a bit more obvious without
clearing of runtime data, etc.
The first is by far the most important. It will allows us to avoid a
bunch of manual memory management boilerplate that is error-prone and
annoying. It should also simplify future CoW improvements for runtime
data.
This patch doesn't change anything besides changing `mesh.runtime.data`
to `mesh.runtime->data`. The cleanups above will happen separately.
Differential Revision: https://developer.blender.org/D16180
When setting the old face set custom data type, do it in the
"layers to write" vector instead of the mesh's poly custom
data layers, which weren't "prepared" yet. Otherwise this
could make the mesh's custom data typemap invalid.
Using the attribute name semantics from T97452, this patch moves the
selection status of mesh elements from the `SELECT` of vertices, and
edges, and the `ME_FACE_SEL` of faces to generic boolean attribute
Storing this data as generic attributes can significantly simplify and
improve code, as described in T95965.
The attributes are called `.select_vert`, `.select_edge`, and
`.select_poly`. The `.` prefix means they are "UI attributes",so they
still contain original data edited by users, but they aren't meant to
be accessed procedurally by the user in arbitrary situations. They are
also be hidden in the spreadsheet and the attribute list.
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when selection is used. When the flags are removed
completely, requirements will decrease.
Further notes:
* The `MVert` flag is empty at runtime now, so it can be ignored.
* `BMesh` is unchanged, otherwise the change would be much larger.
* Many tests have slightly different results, since the selection
attribute uses more generic propagation. Previously you couldn't
really rely on edit mode selections being propagated procedurally.
Now it mostly works as expected.
Similar to 2480b55f21
Ref T95965
Differential Revision: https://developer.blender.org/D15795
This is very similar to D14077. There are two differences though.
First is that vertex creases are already stored in a separate layer,
and second is that we can now completely remove use of `Mesh.cd_flag`,
since that information is now inherent to whether the layers exist.
There are two functional differences here:
* Operators are used to add and remove layers instead of a property.
* The "crease" attribute can be created and removed by geometry nodes.
The second change should make various geometry nodes slightly faster,
since the "crease" attribute was always processed before. Creases are
now interpolated generically in the CustomData API too, which should
help maintain the values across edits better.
Meshes get an `edge_creases` RNA property like the existing vertex
property, to provide more efficient access to the data in Cycles.
One test failure is expected, where different rounding between float
the old char storage means that 5 additional points are scattered in
a geometry nodes test.
Differential Revision: https://developer.blender.org/D15927
Similar to the other refactors from T95965, this commit moves sculpt
face sets to use a generic integer attribute named `".sculpt_face_set"`.
This makes face sets accessible in the Python API.
The attribute is not visible in the attributes list or the spreadsheet
because it is meant for internal use, though that could be an option
in the future along with other similar attributes. Currently the change
is small, but in the future this could simplify code by allowing use
of more generic attribute APIs.
Differential Revision: https://developer.blender.org/D16045
Converting to the SoA format (T95965) immediately when reading meshes
means that none of the changes from versioning would be applied first.
This means important fixes like f14995aba7 aren't properly applied,
so modifications could be done to invalid CustomData. To fix this, move
the SoA changes into versioning code, in a new versioning_400.cc file.
Differential Revision: https://developer.blender.org/D15919
`MPoly` is used and copied in many places. To avoid the need to use a
special function for copying MPoly, or the need to add a copy
constructor, just rename the `mat_nr` field to include "legacy" in the
name. This keeps the original purpose of notifying developers that
the field shouldn't be used without any further complexity.
Apply the same fix to `bweight`.
Differential Revision: https://developer.blender.org/D15841
When there was only a single material assigned to the mesh, the material
index attribute didn't necessarily exist. Changing the oder of the slots
wouldn't change the first material index as necessary.
When resizing mesh and curves attribute storage, avoid initializing the
new memory for basic types. Also, avoid skipping "no free" layers; all
layers should be reallocated to the new size since they may be accessed.
The semantics introduced in 25237d2625 are essential for this
change, because otherwise we don't have a way to construct non-trivial
types in the new memory.
In a basic test of the extrude node, I observed a performance
improvement of about 30%, from 55ms to 42ms.
Differential Revision: https://developer.blender.org/D15818
