Texture matrix bug in plugin code reported by Mel_Q.
Vertex colors, this was basically the same as the previous uv coord
splitting bug, for xml export, uv coord splitting was actually not quite
complete either (reported by richie).
Added:
Camera Ipo curves for DoF aperture and focal distance.
Aspect ratio set with AspX & AspY are now taken into account as well.
(needs yafray from cvs)
Bokeh parameters for DoF (also needs yafray from cvs).
'Bokeh' controls the shape of out of focus points when rendering
with depth of field enabled.
This is mostly visible on very out of focus highlights in the image.
There are currently seven types to choose from.:
'Disk1' is the default, the same as was used before.
'Disk2' is similar, but allows you to modify the shape further with the 'bias'
parameter, see below.
Triangle/Square/Pentagon/Hexagon, in addition to the bias control, you can
offset the rotation with the 'Rotation' parameter (in degrees).
'Ring', a weird ring shaped lens, no additional controls.
The 'bias' menu controls accentuation of the shape.
Three types available, uniform, center or edge, with uniform the default.
Although based on an actual phenomenon of real camera's, the current
code is bit of a hack and not physically based, and doesn't work all that
well yet (in yafray anyway). Since this is also mostly visible in the very
out of focus parts of the image, it usually also means that you need lots
of samples to get a reasonably smooth result.
Blender hemilight shadow flag now ignored (reported by varuag).
Texture axes were not exported for procedural textures.
Duplicate armatures were not handled correctly (reported by richie).
Triangle uv-coord splitting (reported by anael, richie & Alvaro).
Additions:
Material 'TexFace' mode now works too, as in Blender it functions as an extra
first texture channel, replacing the base color.
The new noise functions for procedural textures are now supported in yafray,
but is not quite completed yet, still undergoing changes.
(needs yafray from cvs).
The 'power' button has been renamed to 'EmitPwr', since it controls background,
arealight (including lamp with radius) & material emit power.
This button can now be used with the 'SkyDome' method as well to control
background lighting.
To control indirect lighting power, a button called 'GI pwr' has been added,
only use this when really necessary, first try modifying 'EmitPwr' instead.
Removed:
The 'gradient' button. This includes the python code to set
this parameter as well.
Bugfix for anim crash with xml export and no export dir set.
Alternate relative path using blender function, but wouldn't be surprised
if it still is a problem in some cases for some (windows) users.
included in the duplicate objects list.
Added support for spherelight 'dummy' mode when used with global photonmap.
It now behaves the same as arealight when used with gpm.
Note to users: even when you only want reflection caustics (metals/mirrors)
you have to set a IOR value higher than 1, similar to glass materials.
The higher, the brighter the caustics.
That should be it...
Extended the range of the depth and cdepth parameters as reqested by leope.
Bumpmapping should now be a bit more similar to the Blender render.
Added support for all remaining lightsources in yafray, tried to make use of
as much of the existing Blender parameters as possible.
Blender Lamp: added switch to enable rendering with shadowbuffer ('softlight' in yafray).
All other parameters are similar to the Blender settings, for yafray both the
bias parameter and the shadowbuffer size can be lower than equivalent Blender
settings, since the yafray buffer is floating point. Remember that 6 shadowmaps
are created in this case, so can use quite a bit of memory with large
buffer settings.
When 'ray shadow' is enabled for this lamp type, it is possible to set a light
radius to create a spherical arealight source ('spherelight' in yafray),
when this is 0, it is exported as a pointlight instead.
Blender Spot: as in Blender now supports 'halo' rendering.
Halo spots always use shadowbuffers, so when enabled the buttons for shadowmap
settings will appear. The 'ray shadow' button can still be used to disable
shadows cast onto other objects, independent of halo shadows.
One thing to remember, halo's don't work with empty backgrounds, something must
be behind the spotlight for it to be visible.
And finally, the photonlight:
probably the most confusing (as more things related to yafray), the photonlight
is not a real lightsource, it is only used as a source to shoot photons from.
Since indirect lighting is already supported (and looks better as well)
only caustics mode is supported.
So to be able to use this properly other lightsources must be used with it.
For the photonlighting to be 'correct' similar lightsettings as for the 'source'
light are needed.
Probably the best way to do this, when you are happy with the lighting setup
you have, and want to add caustics, copy the light you want to enable for
caustics (shift-D) and leave everything as is, then change the mode to
'Photon'.
To not waiste any photons, the photonlight behaves similar to the spotlight,
you can set the width of the beam with the 'angle' parameter. Make sure
that any object that needs to cast caustics is within that beam, make
the beam width as small as possible to tightly fit the object.
The following other parameters can be set:
-photons: the number of photons to shoot.
-search: the number of photons to search when rendering, the higher,
the blurrier the caustics.
-depth: the amount of photon bounces allowed, since the primary use is for
caustics, you probably best set this to the same level as the 'ray depth'
parameter.
-Blur: this controls the amount of caustics blur (in addition to the search
parameter), very low values will cause very sharp caustics, which when used
with a low photonnumber, probably lead to only some noisy specks being rendered.
-Use QMC: Use quasi monte carlo sampling, can lead to cleaner results, but also
can sometimes cause patterns.
Since the photonlight has no meaning to Blender, when using photonlights and
switching back to the internal render, the light doesn't do anything, and no
type button will be selected. The lightsource can still be selected, but unless
switching to yafray, no parameters can set.
Apologies to Anexus, I had no time to really do something with your code,
I'll still look at it later, to see if I can improve anything in my implementation.
Added the missing anti-aliasing pixel filter size and threshold parameters for manual AA control (disable 'Auto AA' button).
Added support for yafray raytraced depth-of-field.
Added extra panel for Camera in edit window to edit dof paramaters.
The actual focus point will be drawn as a cross when camera 'ShowLimits' is enabled, similar to the aqsis code in tuhopuu.
Note to users: raytraced DoF is very slow, for best results, the default AA parameters are not good enough, especially with higher aperture values (more blur).
So for best results, disable 'Auto AA' and set the AA parameters yourself.
It works best with multi-pass AA ('AA passes' > 1) and a reasonable 'AA samples' value, something in the range 8 - 25 or even higher.
Currently the post-process DoF is not available in yafray, alternatives are being worked on.
When using xml export, yafray will now render the alpha channel as well when 'RGBA' button in blender is enabled (Plugin does this automatically).
In plugin code, fixed smooth shading bug for non-mesh objects.
Relative paths for textures are now recognized (plugin & xml).
Fixed problem with duplicate objects (plugin & xml).
Really old bug, sun position is now correct (plugin & xml).
World background now can also be a regular image texture (jpeg & tga), but for now always assumes spheremapping, which is not the same as Blender either. In yafray the texture is assumed to be a full 360 (panorama type) map.
convertBlenderScene.c cleanup, the identity transform 'hack' is removed.
THIS AFFECTS ALL EXTERNAL RENDERERS (Aqsis and others) WHICH RELY ON THE RENDERDATA OUTPUT, VERTICES AND LAMPCOORDINATES/VECTORS NOW NEED TO BE TRANSFORMED BACK TO WORLD COORDINATES. See yafray plugin/export code.
on my win32 box with my tests without crashing.
But be aware! There may be more of them watching
us, waiting for a moment of distraction, nobody
is safe.
Just making sure memory is always allocated and freed in the same
binary object, which seems to be mandatory on msvc if you don't have
the comercial version. If you are using this code you need to
syncronize with yafray cvs also, or it won't work. Binaries for os x
are updated in the link I gave in my last commit.
Needs latest yafray, you can get it from cvs, but I have also binaries
for os x here:
http://www.coala.uniovi.es/~jandro/noname/downloads/yafray-0.0.6-3.pkg.zip
To use it, go to yafray panels (global settings) and uncheck the "xml" button.
That would tell the export code to avoid xml export and use the yafray plugin
instead. You'll see the render being draw while running and you can even stop it
with ESC key.
Since I'm sure problems will appear, expect updates soon.
Remember: does not work on win32
