This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
Custom render passes are added in the Shader AOVs panel in the view layer
settings, with a name and data type. In shader nodes, an AOV Output node
is then used to output either a value or color to the pass.
Arbitrary names can be used for these passes, as long as they don't conflict
with built-in passes that are enabled. The AOV Output node can be used in both
material and world shader nodes.
Implemented by Lukas, with tweaks by Brecht.
Differential Revision: https://developer.blender.org/D4837
This is only supposed to happen when copying nodes that are part of the user
editable database, not temporary copies for the dependency graph.
The LIB_ID_COPY_LOCALIZE test was wrong because it is a combination of multiple
bitflags as pointed out by Bastien, and was actually redundant anyway since
LIB_ID_CREATE_NO_MAIN is part of it.
Modes: Linear interpolation (default), stepped linear, smoothstep and smootherstep.
This also includes an additional option for the **Clamp node** to switch between **Min Max** (default) and **Range** mode.
This was needed to allow clamping when **To Max** is less than **To Min**.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D5827
When creating shaders and using maths functions it is expected that Blender should match functions in other DCC applications, game engines and shading languages such as GLSL and OSL.
This patch adds missing functions to the Blender maths node.
Ideally, it would be nice to have these functions available to vectors too but that is not part of this patch.
This patch adds the following functions trunc, snap, wrap, compare, pingpong, sign, radians, degrees, cosh, sinh, tanh, exp, smoothmin and inversesqrt.
Sign function is based on GLSL and OSL functions and returns zero when x == 0.
Differential Revision: https://developer.blender.org/D5957
Extend options are currently stored per curve. This was not clearly
communicated to the user and they expected this to be a setting per
CurveMapping.
This change will move the option from `Curve` to `CurveMapping`. In
order to support this the API had to be changed.
BPY: CurveMap.evaluate is also moved to CurveMapping.evaluate what
breaks Python API. Cycles has been updated but other add-ons have
not. After release of 2.81 we can merge this to master and adapt
the add-ons.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6169
The Random Per Island attribute is a random float associated with each
connected component (island) of the mesh. It is particularly useful
when artists want to add variations to meshes composed of separate
units. Like tree leaves created using particle systems, wood planks
created using array modifiers, or abstract splines created using AN.
Reviewed By: Sergey Sharybin, Jacques Lucke
Differential Revision: https://developer.blender.org/D6154
Was caused by non-normalized coordinates (normals). Note this is not 100%
correct as the dFdx functions can be the same for packs of 4 pixels and the
derivated value can only be correct for one pixels.
This is because smoothed normals are a non-linear function (because of the
normalization).
The correct fix would be to do the dFdx offset BEFORE any normalization.
Was caused by the bump node not being evaluated because the other branch
was evaluated before.
To fix this, we use fromnode instead of tonode.
Also we fix a potential issue with recursiveness because
ntree_shader_copy_branch() also use nodeChainIterBackwards() which would
reset the iter_flag in the middle of the parent iteration. Use iter_flag
as a bitflag for each iteration to fix this.
The gain socket in the Musgrave node should be available in the ridged
multifractal mode. The logic for the availability was incorrect.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5989
Should speed up eevee mesh update a tiny bit in certain particular cases
(deform modifier + (shader using texcoord (but not generated output) OR
principled bsdf OR geometry node (except tangent output))).
This makes a lot of shader node wiring code less complex.
This only add the flatten mechanism (which fixes T69672).
~~Cleanup to remove the complexity in ntree_shader_relink_displacement,
ntree_shader_bump_branches and ntree_shader_tag_nodes will be commited
separately.~~(already included)
The code is only added for shader nodes for now but could be exported to
other internal nodetree types in the future.
Cleanup: Node Shader Tree: Remove GPUmaterial special nodegroup handling
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T69672
Differential Revision: https://developer.blender.org/D5829
This patch adds a new Vertex Color node. The node also returns the alpha
of the vertex color layer as an output.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5767
This patch allows the Voronoi node to operate in 1D, 2D, and 4D space.
It also adds a Randomness input to control the randomness of the texture.
Additionally, it adds three new modes of operation:
- Smooth F1: A smooth version of F1 Voronoi with no discontinuities.
- Distance To Edge: Returns the distance to the edges of the cells.
- N-Sphere Radius: Returns the radius of the n-sphere inscribed in
the cells. In other words, it is half the distance between the
closest feature point and the feature point closest to it.
And it removes the following three modes of operation:
- F3.
- F4.
- Cracks.
The Distance metric is now called Euclidean, and it computes the actual
euclidean distance as opposed to the old method of computing the squared
euclidean distance.
This breaks backward compatibility in many ways, including the base case.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5743
This patch extends Musgrave noise to operate in 1D, 2D, 3D, and 4D
space. The Color output was also removed because it was identical
to the Fac output.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5566
We basically duplicate the height map branch plugged into the bump node,
and tag each node in each branch as dx/dy/ref using `branch_tag`.
Then we add a one pixel offset on the texture coordinates if the node is
tagged as dx or dy.
The dx/dy branches are plugged into (new) hidden sockets on the bump node.
This match cycles bump better but have a performance impact. Also, complex
nodetrees can now become instruction limited and not compile anymore.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5531
This patch rewrites the Mapping node to support dynamic inputs. The
Max and Min options have been removed. They can be added as Min and
Max Vector Math nodes manually.
Texture nodes still use the old matrix-based mapping. A new SVM node
`NODE_TEXTURE_MAPPING` has been added to preserve this functionality.
Similarly, in GLSL, a `mapping_mat4` function has been added.
Reviewers: brecht, JacquesLucke
This patch extends perlin noise to operate in 1D, 2D, 3D, and 4D
space. The noise code has also been refactored to be more readable.
The Color output and distortion patterns changed, so this patch
breaks backward compatibility. This is due to the fact that we
now use random offsets as noise seeds, as opposed to swizzling
and constants offsets.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5560
This patch continue the efforts to split the `gpu_shader_material` file
started in D5569.
Dependency resolution is now recursive. Each shading node gets its own
file. Additionally, some utility files are added to be shared between
files, like `math_util`, `color_util`, and `hash`. Some files are always
included because they may be used in the execution function, like
`world_normals`.
Some glsl functions appeared to be unused, so they were removed, like
`output_node`, `bits_to_01`, and `exp_blender`. Other functions have
been renamed to be more general and get used as utils, like `texco_norm`
which became `vector_normalize`.
A lot of the opengl tests fails, but those same tests also fail in
master, so this is probably unrelated to this patch.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5616
The object color property is added as an additional output in
the Object Info node.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5554
The Volume Info node provides the Color, Desnity, Flame, and Temperature
of smoke domains.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5551
The White Noise node hashes the input and returns a random number in the
range [0, 1]. The input can be a 1D, 2D, 3D, or a 4D vector.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5550
Add Multiply, Divide, Project, Reflect, Distance, Length, Scale, Snap,
Floor, Ceil, Modulo, Fraction, Absolute, Minimum, and Maximum operators
to the Vector Math node. The Value output has been removed from operators
whose output is a vector, and the other way around. All of those removals
has been handled properly in versioning code.
The patch doesn't include tests for the new operators. Tests will be added
in a later patch.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5523
- Implement dynamic inputs. The second input is now unavailable in single
operand math operators.
- Reimplemenet the clamp option using graph expansion for Cycles.
- Clean up code and unify naming between Blender and Cycles.
- Remove unused code.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5481
The Normal vector socket in the Normal node wasn't drawn properly and
couldn't be controlled. Additionally, the socket name was drawn over it.
This happened because the socket had a default value of a zero vector.
To fix this, we set the default value to the unit vector `(0, 0, 1)`.
Moreover, we don't draw the UI name if the subtype is `PROP_DIRECTION`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5503
Alpha blended Transparency is now using dual source blending making it
fully compatible with cycles Transparent BSDF.
Multiply and additive blend mode can be achieved using some nodes and are
going to be removed.
If the option is enabled, the output is clamped to the target range.
The target range is [To Min, To Max]. The option is enabled by default.
The clamp option is implemented in EEVEE by linking to the `clamp_value`
GLSL function. And it is implemented in Cycles using a graph expand
function.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5477
This patch adds a new node that clamps a value between a maximum and
a minimum values.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5476
This patch adds a new Map Range node that linearly remaps an input
value from a range to another. This node is similar to the compositor's
Map Range node.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5471
Change the default drawing method of vector sockets to use a column layout.
This allows more interactive use of nodes and avoids the one or two clicks
needed to edit vector sockets in the old default component layout.
Developers may still use the component layout by flaging the socket with the
`SOCK_COMPACT` socket flag. For now, we choose to draw the SSS scale vector
of the Principled and SSS nodes in a compact form because they don't require
much interactivity.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5458
