The main purpose for this is to allow rendering motion blurred blender fluids in external renderers (eg. http://vimeo.com/21870635 ).
Python code snippet for interpreting this data here: http://www.pasteall.org/21577 . Cleaned up some ugly hacks in this area too
* Also added read-only access to scene.subframe to RNA - setting current frame and subframe should still go via scene.frame_set()
simple modifier, almost like a hook, except it can deform with 2 object source -> target, has option to preserve rotation and use different falloff types.
Made some improvements to the point density texture. Added support
for tweaking the falloff with a custom curve. Also coded new
falloff types based on the age or velocity of particles.
Also added a test break check to the volumetric shade cache code,
to avoid nasty hangups from the preview render (on render, exit,
etc).
Actions now get tagged with an ID-code, which is used to determine
what ID-blocks they can be assigned to. This ensures that material
actions cannot be assigned to the object-level for example.
* Action lists in general will now show only the actions that can be
set for that particular slot. This prevents selection of invalid
actions, and helps cut down the list of actions.
** An exception here is the Add Action Clip in NLA Editor, which will
show all actions but will only add where appropriate. This is because
it's not easy/possible to tell in advance which blocktypes to filter
for when building this list. (TODO?)
* The "Action Editor" is now strictly for object-level action
editing+setting now. This avoids repeateded confusion by people who
try using this to view their shapekey actions, which should go to the
Shape Key Editor instead!
** A context switcher for the legitimate times where this capability
might come in handy is still being investigated.
* "Floating" actions (i.e. actions in some action_library.blend) are
NOT able to be automatically tagged until they are assigned to some
datablocks (i.e. loaded onto the rig + played back once). It is
possible to write scripts that check for certain RNA-paths and "guess"
what datablocks they work on, but it is recommended that you load up
the Datablocks Viewer, and go through such actions by hand, setting
the "ID Root Type" property as appropriate per action.
on smooth/flat flag on faces. This does give better results for low poly
game models, but there's just too much functionality that depends on this
(modifiers, displacey, editmode tools, extrude, ...), that there's not
enough time to fix these before the release.
was missing array cap ends, wave map object and shrinkwrap objects.
use modifiers_foreachIDLink() rather then having to list all modifiers ID's in this function.
also add foreachIDLink() for smoke domain.
This fixes a bug where a linked object has as a modifier using an indirectly linked object for the missing cases mentioned above.
into account that some tools use normals for things other than display. Now
we properly initialize vertex normals at flat faces too.
Also fixed a normal refresh issue, and deduplicated CDDM/mesh normal
calculation code.
restore, would not get their dependencies updated when they became visible.
It happend with a shrinkwrap modifier in these reports, but could happen with
other modifiers too.
Now we keep track of which layers have ever been updated since load, and tag
objects on them to be recalculated when they become visible.
weighted normals as the render engine, and the render engine will copy
normals from the mesh rather than always recalculating them.
Subsurf/multires still use regular vertex normals, but they are expected
to be sufficiently high resolution to not need this.
This means that normal maps displayed in the viewport actually match the
render engine exactly and don't have artifacts due to this discrepancy.
It of course also avoids unexpected surprises where your render normals
look different than your viewport normals.
Subversion bumped to 4 for version patch to recalculate normals.
Patch by Morten Mikkelsen, with some small changes.
* The old collisions code detected particle collisions by calculating the
collision times analytically from the collision mesh faces. This was
pretty accurate, but didn't support rotating/deforming faces at all, as
the equations for these quickly become quite nasty.
* The new code uses a simple "distance to plane/edge/vert" function and
iterates this with the Newton-Rhapson method to find the closest particle
distance during a simulation step.
* The advantage in this is that the collision object can now move, rotate,
scale or even deform freely and collisions are still detected reliably.
* For some extreme movements the calculation errors could stack up so much
that the detection fails, but this can be easily fixed by increasing the
particle size or simulation substeps.
* As a side note the algorithm doesn't really do point particles anymore,
but uses a very small radius as the particle size when "size deflect" isn't
selected.
* I've also updated the collision response code a bit, so now the particles
shouldn't leak even from tight corners.
All in all the collisions code is now much cleaner and more robust than before!
the same, but big changes have happened both on the outside and on the inside.
New UI:
* The old parameters were quite true to the underlying algorithm, but were quite obscure
from a users point of view. Now there are only a few intuitive basic parameters that
define the basic fluid behavior.
** By default particle size is now used to determine the interaction radius, rest
density and spring rest lengths so that it's easy to get stable simulations by simply
emitting particles for a few frames and adjusting the particle size (easy when the
particle size is drawn) so that the fluid appears continuous (particles are touching
eachother).
** Stiffness - in reality most fluids are very incompressible, but this is a very hard
problem to solve with particle based fluid simulation so some compromises have to be
made. So the bigger the stiffness parameter is the less the fluid will compress under
stress, but the more substeps are needed for stable simulation.
** Viscosity - how much internal friction there is in the fluid. Large viscosities also
smooth out instabilities, so less viscous fluids again need more substeps to remain
stable.
** Buoancy - with high buoancy low pressure areas inside the fluid start to rise against
gravity, and high pressure areas start to come down.
* In addition to these basic parameters there are separate advanced parameters that can
either be tweaked relative to the basic parameters (or particle size) or defined
independently.
** Repulsion - the stiffness parameter tries to keep the fluid density constant, but this
can lead to small clumps of particles, so the repulsion keeps the particles better
separated.
** Stiff viscosity - the normal viscosity only applies when particles are moving closer to
eachother to allow free flowing fluids. Stiff viscosity also applies smoothing to
particles that are moving away from eachother.
** Interaction radius - by default this is 4 * particle size.
** Rest density - by default this is a density that the particles have when they're packed
densely next to eachother.
** Spring rest length - by default this is 2 * particle size.
* There are also new options for 3d view particle coloring in the display panel to show
particle velocity and acceleration. These make it easier to see what's happening in the
fluid simulations, but can of course be used with other particles as well.
* Viscoelastic springs have some new options too. The plasticity can now be set to much
higher values for instant deletion of springs as the elastic limit is exeeded. In addition
to that there is an option to only create springs for a certain number of frames when a
particle is born. These options give new possibilities for breaking viscoelastic fluids.
New in the code:
* Most of the fluids code is now thread safe, so when particle dynamics go threaded there
will be a nice speed boost to fluids as well.
* Fluids now use a bvh-tree instead of a kd-tree for the neighbor lookups. The bvh-tree
implementation makes the code quite a bit cleaner and should also give a slight speed
boost to the simulation too.
* Previously only force fields were calculated with the different integration methods, but
now the fluid calculations are also done using the selected integration method, so there
are again more choices in effecting simulation accuracy and stability. This change also
included a nice cleanup of the whole particle integration code.
As the internals are pretty stirred up old particle fluid simulations will probably not
work correctly straight away, but with some tweaking the same level of control is still
available by not using the "relative versions" of the advanced parameters (by default these
are not used when loading old files).
* Removed some fields from struct SculptSession:
- Fields drawobject, projverts, and previous_r were completely
unused
- Field `ob' was really unnecessary, changed sculpt functions
to pass the object rather than the SculptSession
This removal of `ob' from SculptSession should should make it a little
easier to continue generalizing paint/sculpt functionality.
There should be no visible changes from cleanup.
More problems with Undo and Render Slots (Image editor)
- Undo storage for operator is now back, but only when new
buffers were added (not when viewing existing)
- A real bug: On undo/redo, the stored buffers were never
retrieved, but always freed entirely.
Note however that when you undo back to a state before you
rendered (or added slots), the render buffers that didn't
exist back then also get freed. A redo doesn't bring it back.
Layer height used to be controlled with brush radius, quite confusing decision.
Added new property for brushes - height for adjusting affectable brush height
(it could be not only layer height in the future).
Was trying to free audio data from sequencer strips that don't even have audio. Corrected the error in several ways so this will definitely not happen again :-)
